Merge pull request #1493 from TanekLiang/hifive1-pr

[bsp] add hifive1 bsp support

bsp/hifive1/.config

@@ -0,0 +1,252 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=32
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+# CONFIG_RT_THREAD_PRIORITY_32 is not set
+CONFIG_RT_THREAD_PRIORITY_256=y
+CONFIG_RT_THREAD_PRIORITY_MAX=256
+CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_DEBUG=y
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_DEBUG_INIT=0
+CONFIG_RT_DEBUG_THREAD=0
+CONFIG_RT_USING_HOOK=y
+CONFIG_IDLE_THREAD_STACK_SIZE=1024
+# CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+CONFIG_RT_USING_MEMTRACE=y
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="dusart"
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_USING_SERIAL=y
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PIN is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_WIFI is not set
+# CONFIG_RT_USING_AUDIO is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+
+#
+# Network stack
+#
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# Modbus master and slave stack
+#
+# CONFIG_RT_USING_MODBUS is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_LOGTRACE is not set
+# CONFIG_RT_USING_RYM is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# system packages
+#
+
+#
+# RT-Thread GUI Engine
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_ONENET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_IPERF is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_SAMPLES is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+
+#
+# example package: hello
+#
+# CONFIG_PKG_USING_HELLO is not set
+
+#
+# Privated Packages of RealThread
+#
+# CONFIG_PKG_USING_CODEC is not set
+# CONFIG_PKG_USING_PLAYER is not set
+# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+
+#
+# Network Utilities
+#
+# CONFIG_PKG_USING_WLAN_WICED_SRC is not set
+# CONFIG_PKG_USING_CLOUDSDK is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_POWER_MANAGER is not set
+# CONFIG_PKG_USING_RT_OTA is not set
+# CONFIG_PKG_USING_RT_AT is not set

bsp/hifive1/Kconfig

@@ -0,0 +1,19 @@
+mainmenu "RT-Thread Configuration"
+
+config $BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config $RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../.."
+
+config $PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"

bsp/hifive1/README.md

@@ -0,0 +1,69 @@
+# HIFIVE1 #
+
+## 简介
+
+[HIFIVE1](https://www.sifive.com/products/hifive1/)是SiFive提供的一款基于RISCV的开发板，搭载SiFive Freedom E310。
+
+板载主要资源如下：
+
+| 硬件 | 描述 |
+| -- | -- |
+|CPU| SiFive E31 RISC-V Core |
+|架构| 32-bit RV32IMAC |
+|主频| 320+ MHz |
+|SRAM| 16KB |
+|Flash| 16MB QSPI + 16KB 指令Cache |
+
+## 编译说明
+
+HIFIVE1可以自行编译工具链，或者使用SiFive提供的[二进制版本](https://www.sifive.com/products/tools/)。
+
+
+## 烧写及执行
+
+供电方式：开发板使用 Micro USB 线连接电脑和开发板。
+
+下载程序：参看[hifive1-getting-started](https://static.dev.sifive.com/dev.../hifive1/hifive1-getting-started-v1.0.2.pdf)完成开发环境的配置，运行bsp里的openocd.sh脚本就可以下载程序了。
+
+### 运行结果
+
+下载程序之后，连接串口(115200-N-8-1)，可以看到RT-Thread的输出信息：
+
+```
+ \ | /
+- RT -     Thread Operating System
+ / | \     3.0.4 build May 30 2018
+ 2006 - 2018 Copyright by rt-thread team
+msh >
+```
+
+## 4. 驱动支持情况及计划
+
+| 驱动 | 支持情况  |  备注  |
+| ------ | ----  | :------:  |
+| UART | 支持 |  |
+| GPIO | 未支持 |  |
+| SPI | 未支持 |  |
+| I2C | 未支持 |  |
+
+### 4.1 IO在板级支持包中的映射情况
+
+| IO号 | 板级包中的定义 |
+| -- | -- |
+| GPIO19 | LED_GREEN |
+| GPIO21 | LED_BLUE |
+| GPIO22 | LED_RED |
+
+## 5. 联系人信息
+
+维护人：
+- [tanek](https://github.com/TanekLiang)
+
+## 6. 参考
+
+* [HIFIVE1 Info](https://www.sifive.com/products/hifive1/)
+* [HIFIVE1 Software Development Tools](https://www.sifive.com/products/tools/)
+* [hifive1-getting-started-guide](https://www.sifive.com/documentation/boards/hifive1/hifive1-getting-started-guide/)
+* [hifive1-schematics](https://www.sifive.com/documentation/boards/hifive1/hifive1-schematics/)
+
+

bsp/hifive1/SConscript

@@ -0,0 +1,18 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = str(Dir('#'))
+src = Glob('*.c')
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+group = DefineGroup('', src, depend = [''], CPPPATH = [])
+#objs += group
+Return('objs')

bsp/hifive1/SConstruct

@@ -0,0 +1,29 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+	CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+	AR = rtconfig.AR, ARFLAGS = '-rc',
+	LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT)
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/hifive1/applications/SConscript

@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'applications')
+src	= Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/hifive1/applications/main.c

@@ -0,0 +1,32 @@
+/*
+ * File      : main.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-05-30     Tanek        first version
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <rtthread.h>
+
+int main(void)
+{
+	return 0;
+}

bsp/hifive1/drivers/SConscript

@@ -0,0 +1,14 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = os.path.join(str(Dir('#')), 'drivers')
+
+# add the general drvers.
+src = Glob("*.c")
+
+CPPPATH = [cwd]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/hifive1/drivers/board.c

@@ -0,0 +1,93 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <interrupt.h>
+#include <rthw.h>
+
+#include <board.h>
+#include <platform.h>
+#include <encoding.h>
+#include <interrupt.h>
+#include <drv_led.h>
+
+extern void use_default_clocks(void);
+extern void use_pll(int refsel, int bypass, int r, int f, int q);
+
+#define TICK_COUNT  (2 * RTC_FREQ / RT_TICK_PER_SECOND)
+
+#define MTIME       (*((volatile uint64_t *)(CLINT_CTRL_ADDR + CLINT_MTIME)))
+#define MTIMECMP    (*((volatile uint64_t *)(CLINT_CTRL_ADDR + CLINT_MTIMECMP)))
+
+/* system tick interrupt */
+void handle_m_time_interrupt()
+{
+    MTIMECMP = MTIME + TICK_COUNT;
+    rt_tick_increase();
+}
+
+/* fixed misaligned bug for qemu */
+void *__wrap_memset(void *s, int c, size_t n)
+{
+    return rt_memset(s, c, n);
+}
+
+static void rt_hw_clock_init(void)
+{
+    use_default_clocks();
+    use_pll(0, 0, 1, 31, 1);
+}
+
+static void rt_hw_timer_init(void)
+{
+    MTIMECMP = MTIME + TICK_COUNT;
+
+    /*  enable timer interrupt*/
+    set_csr(mie, MIP_MTIP);
+}
+
+void rt_hw_board_init(void)
+{
+    /* initialize the system clock */
+    rt_hw_clock_init();
+
+    /* initialize hardware interrupt */
+    rt_hw_interrupt_init();
+
+    /* initialize timer0 */
+    rt_hw_timer_init();
+
+#ifdef RT_USING_HEAP
+    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
+#endif
+
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+
+#ifdef RT_USING_CONSOLE
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+
+    return;
+}
+

bsp/hifive1/drivers/board.h

@@ -0,0 +1,32 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#ifndef __BOARD__
+#define __BOARD__
+
+extern  void *_end;
+extern  void *_heap_end;
+#define HEAP_BEGIN  &_end
+#define HEAP_END    &_heap_end
+
+#endif

bsp/hifive1/drivers/drv_usart.c

@@ -0,0 +1,125 @@
+/*
+ * File      : drv_usart.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <rtdevice.h>
+
+#include <encoding.h>
+#include <platform.h>
+#include <interrupt.h>
+
+static void usart_handler(int vector, void *param)
+{
+    rt_hw_serial_isr((struct rt_serial_device *)param, RT_SERIAL_EVENT_RX_IND);
+}
+
+static rt_err_t usart_configure(struct rt_serial_device *serial,
+                                struct serial_configure *cfg)
+{
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+ 
+    GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
+    GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
+
+    UART0_REG(UART_REG_DIV) = get_cpu_freq() / cfg->baud_rate - 1;
+    UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+    UART0_REG(UART_REG_RXCTRL) |= UART_RXEN;
+    UART0_REG(UART_REG_IE) = UART_IP_RXWM;
+
+    return RT_EOK;
+}
+
+static rt_err_t usart_control(struct rt_serial_device *serial,
+                              int cmd, void *arg)
+{
+    RT_ASSERT(serial != RT_NULL);
+
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_CLR_INT:
+        break;
+    case RT_DEVICE_CTRL_SET_INT:
+        break;
+    }
+
+    return RT_EOK;
+}
+
+static int usart_putc(struct rt_serial_device *serial, char c)
+{
+    while (UART0_REG(UART_REG_TXFIFO) & 0x80000000) ;
+    UART0_REG(UART_REG_TXFIFO) = c;
+
+    return 0;
+}
+
+static int usart_getc(struct rt_serial_device *serial)
+{
+    rt_int32_t val = UART0_REG(UART_REG_RXFIFO);
+    if (val > 0)
+        return (rt_uint8_t)val;
+    else
+        return -1;
+}
+
+static struct rt_uart_ops ops =
+{
+    usart_configure,
+    usart_control,
+    usart_putc,
+    usart_getc,
+};
+
+static struct rt_serial_device serial =
+{
+    .ops = &ops,
+    .config.baud_rate = BAUD_RATE_115200,
+    .config.bit_order = BIT_ORDER_LSB,
+    .config.data_bits = DATA_BITS_8,
+    .config.parity    = PARITY_NONE,
+    .config.stop_bits = STOP_BITS_1,
+    .config.invert    = NRZ_NORMAL,
+    .config.bufsz     = RT_SERIAL_RB_BUFSZ,
+};
+
+int rt_hw_uart_init(void)
+{
+    rt_hw_serial_register(
+        &serial,
+        "dusart",
+        RT_DEVICE_FLAG_STREAM
+        | RT_DEVICE_FLAG_RDWR
+        | RT_DEVICE_FLAG_INT_RX, RT_NULL);
+
+    rt_hw_interrupt_install(
+        INT_UART0_BASE,
+        usart_handler,
+        (void *) & (serial.parent),
+        "uart interrupt");
+
+    rt_hw_interrupt_unmask(INT_UART0_BASE);
+
+    return 0;
+}
+INIT_BOARD_EXPORT(rt_hw_uart_init);
+

bsp/hifive1/drivers/interrupt.c

@@ -0,0 +1,158 @@
+/*
+ * File      : interrupt.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2018, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <rthw.h>
+#include <plic_driver.h>
+#include <platform.h>
+#include <encoding.h>
+#include <interrupt.h>
+
+#define MAX_HANDLERS    PLIC_NUM_INTERRUPTS
+
+/* exception and interrupt handler table */
+static struct rt_irq_desc irq_desc[MAX_HANDLERS];
+
+static plic_instance_t g_plic;
+
+/**
+ * This function will mask a interrupt.
+ * @param vector the interrupt number
+ */
+void rt_hw_interrupt_mask(int irq)
+{
+    PLIC_disable_interrupt(&g_plic, irq);
+}
+
+/**
+ * This function will un-mask a interrupt.
+ * @param vector the interrupt number
+ */
+void rt_hw_interrupt_unmask(int irq)
+{
+    PLIC_enable_interrupt(&g_plic, irq);
+    PLIC_set_priority(&g_plic, irq, 1);
+}
+
+rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param)
+{
+    rt_kprintf("UN-handled interrupt %d occurred!!!\n", vector);
+    return RT_NULL;
+}
+
+void rt_hw_interrupt_init(void)
+{
+    int idx;
+    
+    /*  config interrupt vector*/
+    asm volatile(
+        "la t0, trap_entry\n"
+        "csrw mtvec, t0"
+    );
+    
+    /*  enable global interrupt*/
+    PLIC_init(&g_plic,
+            PLIC_CTRL_ADDR,
+            PLIC_NUM_INTERRUPTS,
+            PLIC_NUM_PRIORITIES);
+
+    /* init exceptions table */
+    for (idx = 0; idx < MAX_HANDLERS; idx++)
+    {
+        rt_hw_interrupt_mask(idx);
+        irq_desc[idx].handler = (rt_isr_handler_t)rt_hw_interrupt_handle;
+        irq_desc[idx].param = RT_NULL;
+#ifdef RT_USING_INTERRUPT_INFO
+        rt_snprintf(irq_desc[idx].name, RT_NAME_MAX - 1, "default");
+        irq_desc[idx].counter = 0;
+#endif
+    }
+    
+    // enable machine external interrupt 
+    set_csr(mie, MIP_MEIP);
+}
+
+rt_uint32_t rt_hw_interrupt_get_active(rt_uint32_t fiq_irq)
+{
+    return (rt_uint32_t)PLIC_claim_interrupt(&g_plic);;
+}
+
+void rt_hw_interrupt_ack(rt_uint32_t fiq_irq, rt_uint32_t id)
+{
+    PLIC_complete_interrupt(&g_plic, id);
+}
+
+/**
+ * This function will install a interrupt service routine to a interrupt.
+ * @param vector the interrupt number
+ * @param handler the interrupt service routine to be installed
+ * @param param the interrupt service function parameter
+ * @param name the interrupt name
+ * @return old handler
+ */
+rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
+        void *param, char *name)
+{
+    rt_isr_handler_t old_handler = RT_NULL;
+
+    if(vector < MAX_HANDLERS)
+    {
+        old_handler = irq_desc[vector].handler;
+        if (handler != RT_NULL)
+        {
+            irq_desc[vector].handler = (rt_isr_handler_t)handler;
+            irq_desc[vector].param = param;
+#ifdef RT_USING_INTERRUPT_INFO
+            rt_snprintf(irq_desc[vector].name, RT_NAME_MAX - 1, "%s", name);
+            irq_desc[vector].counter = 0;
+#endif
+        }
+    }
+
+    return old_handler;
+}
+
+/**
+ * This function will be call when external machine-level 
+ * interrupt from PLIC occurred.
+ */
+void handle_m_ext_interrupt(void)
+{
+    rt_isr_handler_t isr_func;
+    rt_uint32_t irq;
+    void *param;
+
+    /* get irq number */
+    irq = rt_hw_interrupt_get_active(0);
+
+    /* get interrupt service routine */
+    isr_func = irq_desc[irq].handler;
+    param = irq_desc[irq].param;
+
+    /* turn to interrupt service routine */
+    isr_func(irq, param);
+    rt_hw_interrupt_ack(0, irq);
+
+#ifdef RT_USING_INTERRUPT_INFO
+    irq_desc[irq].counter ++;
+#endif
+}

bsp/hifive1/drivers/interrupt.h

@@ -0,0 +1,37 @@
+/*
+ * File      : interrupt.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2018, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#ifndef __INTERRUPT_H__
+#define __INTERRUPT_H__
+
+#include <rthw.h>
+void rt_hw_interrupt_mask(int irq);
+void rt_hw_interrupt_unmask(int irq);
+rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param);
+void rt_hw_interrupt_init(void);
+rt_uint32_t rt_hw_interrupt_get_active(rt_uint32_t fiq_irq);
+void rt_hw_interrupt_ack(rt_uint32_t fiq_irq, rt_uint32_t id);
+rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
+        void *param, char *name);
+        
+#endif

bsp/hifive1/freedom-e-sdk/LICENSE

@@ -0,0 +1,206 @@
+
+This software, except as otherwise noted in subrepositories, 
+is licensed under the Apache 2 license, quoted below.
+
+
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright 2016 SiFive, Inc.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

bsp/hifive1/freedom-e-sdk/README.md

@@ -0,0 +1,143 @@
+# README #
+
+This repository, maintained by SiFive, Inc, makes it easy to get started developing software for the Freedom E RISC-V platform. 
+
+### Contents ###
+
+* RISC-V Software Toolchain 
+* RISC-V Debugging Toolchain
+* Board Support Packages for FE310 and Development Kits
+* A Few Example Programs
+
+### Setting up the SDK ###
+
+First, clone this repository:
+
+```
+git clone --recursive https://github.com/sifive/freedom-e-sdk.git
+```
+
+To see Makefile options:
+
+```
+cd freedom-e-sdk
+make help
+```
+
+#### Building Tools from Source ####
+
+Ubuntu packages needed:
+
+	$ sudo apt-get install autoconf automake libmpc-dev libmpfr-dev libgmp-dev gawk bison flex texinfo libtool libusb-1.0-0-dev make g++ pkg-config libexpat1-dev zlib1g-dev  
+
+Next, build the tools:
+
+```
+cd freedom-e-sdk
+make tools [BOARD=freedom-e300-hifive1]
+```
+
+If your machine has enough resources, you can speed up the build process by adding `-j n` to `make`, where `n` is the number of processors of your build system.
+
+
+#### Using Pre-Built Binary Tools ####
+
+If you would like to avoid compiling the tools from source, they are
+available as pre-built binaries from
+
+https://sifive.com/products/tools
+
+For OpenOCD and/or RISC-V GNU Toolchain,
+download the .tar.gz for your platform, and unpack it to
+your desired location. Then, use the `RISC_PATH` and `RISCV_OPENOCD_PATH`
+variables when attempting to use the tools:
+
+```
+cp openocd-<date>-<platform>.tar.gz /my/desired/location/
+cp riscv64-unknown-elf-gcc-<date>-<platform>.tar.gz /my/desired/location
+cd /my/desired/location
+tar -xvf openocd-<date>-<platform>.tar.gz
+tar -xvf riscv64-unknown-elf-gcc-<date>-<platform>.tar.gz
+export RISCV_OPENOCD_PATH=/my/desired/location/openocd
+export RISCV_PATH=/my/desired/location/riscv64-unknown-elf-gcc-<date>-<version>
+```
+
+### Updating your SDK ###
+
+If you'd like to update your SDK to the latest version:
+
+```
+cd freedom-e-sdk
+git pull origin master
+git submodule update --init --recursive
+```
+
+If you would like to recompile the entire toolchain after performing the above:
+
+```
+make uninstall
+make tools
+```
+### Using the Tools ###
+
+To compile a bare-metal RISC-V program:
+
+```
+cd freedom-e-sdk
+make software [PROGRAM=demo_gpio] [BOARD=freedom-e300-hifive1]
+```
+
+Run `make help` for more commands.
+
+### Benchmarking ###
+
+#### Dhrystone ####
+
+After setting up the software and debug toolchains, you can build and
+execute everyone's favorite benchmark as follows:
+
+- Compile the benchmark with the command `make software PROGRAM=dhrystone`.
+- Run on the HiFive1 board with the command `make upload PROGRAM=dhrystone`.
+  This will take a few minutes.  Sample output is provided below.
+- Compute DMIPS by dividing the Dhrystones per Second result by 1757, which
+  was the VAX 11/780's performance.  In the example below, 729927 / 1757 =
+  415 DMIPS.
+- Compute DMIPS/MHz by dividing by the clock rate: in the example below,
+  415 / 260 = 1.60 DMIPS/MHz.
+
+```
+core freq at 259830579 Hz
+
+Dhrystone Benchmark, Version 2.1 (Language: C)
+
+<snip>
+
+Microseconds for one run through Dhrystone: 1.3
+Dhrystones per Second:                      729927.0
+```
+
+#### CoreMark ####
+
+We cannot distribute the CoreMark benchmark, but following are instructions
+to download and run the benchmark on the HiFive1 board:
+
+- Download CoreMark from EEMBC's web site and extract the archive from
+  http://www.eembc.org/coremark/download.php.
+- Copy the following files from the extracted archive into the
+  `software/coremark` directory in this repository:
+  - `core_list_join.c`
+  - `core_main.c`
+  - `coremark.h`
+  - `core_matrix.c`
+  - `core_state.c`
+  - `core_util.c`
+- Compile the benchmark with the command `make software PROGRAM=coremark`.
+- Run on the HiFive1 board with the command `make upload PROGRAM=coremark`.
+- Divide the reported Iterations/Sec by the reported core frequency in MHz to
+  obtain a CoreMarks/MHz value.
+
+### For More Information ###
+
+Documentation, Forums, and much more available at
+
+[dev.sifive.com](https://dev.sifive.com)

bsp/hifive1/freedom-e-sdk/SConscript

@@ -0,0 +1,20 @@
+# RT-Thread building script for component
+
+Import('rtconfig')
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+src = [ 'bsp/drivers/plic/plic_driver.c',
+        'bsp/env/start.S',
+	'bsp/env/freedom-e300-hifive1/init.c']
+
+CPPPATH = [ cwd + '/bsp/drivers', cwd + '/bsp/drivers/fe300prci', cwd + '/bsp/drivers/plic',
+            cwd + '/bsp/env', cwd + '/bsp/env/freedom-e300-hifive1',
+            cwd + '/bsp/include', cwd + '/bsp/include/sifive', cwd + '/bsp/include/sifive/devices']
+
+CPPDEFINES = []
+
+group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
+
+Return('group')

bsp/hifive1/freedom-e-sdk/bsp/drivers/fe300prci/fe300prci_driver.c

@@ -0,0 +1,252 @@
+// See LICENSE file for license details
+
+#include "platform.h"
+
+#ifdef PRCI_CTRL_ADDR
+#include "fe300prci/fe300prci_driver.h"
+#include <unistd.h>
+
+#define rdmcycle(x)  {				       \
+    uint32_t lo, hi, hi2;			       \
+    __asm__ __volatile__ ("1:\n\t"		       \
+			  "csrr %0, mcycleh\n\t"       \
+			  "csrr %1, mcycle\n\t"	       \
+			  "csrr %2, mcycleh\n\t"		\
+			  "bne  %0, %2, 1b\n\t"			\
+			  : "=r" (hi), "=r" (lo), "=r" (hi2)) ;	\
+    *(x) = lo | ((uint64_t) hi << 32); 				\
+  }
+
+uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq)
+{
+
+  uint32_t start_mtime = CLINT_REG(CLINT_MTIME);
+  uint32_t end_mtime = start_mtime + mtime_ticks + 1;
+
+  // Make sure we won't get rollover.
+  while (end_mtime < start_mtime){
+    start_mtime = CLINT_REG(CLINT_MTIME);
+    end_mtime = start_mtime + mtime_ticks + 1;
+  }
+
+  // Don't start measuring until mtime edge.
+  uint32_t tmp = start_mtime;
+  do {
+    start_mtime = CLINT_REG(CLINT_MTIME);
+  } while (start_mtime == tmp);
+  
+  uint64_t start_mcycle;
+  rdmcycle(&start_mcycle);
+  
+  while (CLINT_REG(CLINT_MTIME) < end_mtime) ;
+  
+  uint64_t end_mcycle;
+  rdmcycle(&end_mcycle);
+  uint32_t difference = (uint32_t) (end_mcycle - start_mcycle);
+
+  uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks;
+  return (uint32_t) freq & 0xFFFFFFFF;
+  
+}
+ 
+
+void PRCI_use_hfrosc(int div, int trim)
+{
+  // Make sure the HFROSC is running at its default setting
+  // It is OK to change this even if we are running off of it.
+  
+  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
+
+  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0);
+  
+  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
+}
+
+void PRCI_use_pll(int refsel, int bypass,
+			 int r, int f, int q, int finaldiv,
+			 int hfroscdiv, int hfrosctrim)
+{
+  // Ensure that we aren't running off the PLL before we mess with it.
+  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
+    // Make sure the HFROSC is running at its default setting
+    PRCI_use_hfrosc(4, 16);
+  }
+  
+  // Set PLL Source to be HFXOSC if desired.
+  uint32_t config_value = 0;
+
+  config_value |= PLL_REFSEL(refsel);
+  
+  if (bypass) {
+    // Bypass
+    config_value |= PLL_BYPASS(1);
+
+    PRCI_REG(PRCI_PLLCFG) = config_value;
+
+    // If we don't have an HFXTAL, this doesn't really matter.
+    // Set our Final output divide to divide-by-1:
+    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
+  } else {
+  
+    // To overclock, use the hfrosc
+    if (hfrosctrim >= 0 && hfroscdiv >= 0) {
+      PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
+    }
+    
+    // Set DIV Settings for PLL
+    
+    // (Legal values of f_REF are 6-48MHz)
+
+    // Set DIVR to divide-by-2 to get 8MHz frequency
+    // (legal values of f_R are 6-12 MHz)
+
+    config_value |= PLL_BYPASS(1);
+    config_value |= PLL_R(r);
+
+    // Set DIVF to get 512Mhz frequncy
+    // There is an implied multiply-by-2, 16Mhz.
+    // So need to write 32-1
+    // (legal values of f_F are 384-768 MHz)
+    config_value |= PLL_F(f);
+
+    // Set DIVQ to divide-by-2 to get 256 MHz frequency
+    // (legal values of f_Q are 50-400Mhz)
+    config_value |= PLL_Q(q);
+
+    // Set our Final output divide to divide-by-1:
+    if (finaldiv == 1){
+      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
+    } else {
+      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv-1));
+    }
+
+    PRCI_REG(PRCI_PLLCFG) = config_value;
+
+    // Un-Bypass the PLL.
+    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
+
+    // Wait for PLL Lock
+    // Note that the Lock signal can be glitchy.
+    // Need to wait 100 us
+    // RTC is running at 32kHz.
+    // So wait 4 ticks of RTC.
+    uint32_t now = CLINT_REG(CLINT_MTIME);
+    while (CLINT_REG(CLINT_MTIME) - now < 4) ;
+    
+    // Now it is safe to check for PLL Lock
+    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0);
+
+  }
+
+  // Switch over to PLL Clock source
+  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
+
+  // If we're running off HFXOSC, turn off the HFROSC to
+  // save power.
+  if (refsel) {
+    PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1);
+  }
+  
+}
+
+void PRCI_use_default_clocks()
+{
+  // Turn off the LFROSC
+  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
+
+  // Use HFROSC
+  PRCI_use_hfrosc(4, 16);
+}
+
+void PRCI_use_hfxosc(uint32_t finaldiv)
+{
+  
+  PRCI_use_pll(1, // Use HFXTAL
+	       1, // Bypass = 1
+	       0, // PLL settings don't matter
+	       0, // PLL settings don't matter
+	       0, // PLL settings don't matter
+	       finaldiv,
+	       -1,
+	       -1);
+}
+
+// This is a generic function, which
+// doesn't span the entire range of HFROSC settings.
+// It only adjusts the trim, which can span a hundred MHz or so.
+// This function does not check the legality of the PLL settings
+// at all, and it is quite possible to configure invalid PLL settings
+// this way.
+// It returns the actual measured CPU frequency.
+
+uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target )
+{
+
+  uint32_t hfrosctrim = 0;
+  uint32_t hfroscdiv = 4;
+  uint32_t prev_trim = 0;
+
+  // In this function we use PLL settings which
+  // will give us a 32x multiplier from the output
+  // of the HFROSC source to the output of the
+  // PLL. We first measure our HFROSC to get the
+  // right trim, then finally use it as the PLL source.
+  // We should really check here that the f_cpu
+  // requested is something in the limit of the PLL. For
+  // now that is up to the user.
+
+  // This will undershoot for frequencies not divisible by 16.
+  uint32_t desired_hfrosc_freq = (f_cpu/ 16);
+
+  PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
+  
+  // Ignore the first run (for icache reasons)
+  uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
+
+  cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
+  uint32_t prev_freq = cpu_freq;
+  
+  while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){
+    prev_trim = hfrosctrim;
+    prev_freq = cpu_freq;
+    hfrosctrim ++;
+    PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
+    cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
+  } 
+
+  // We couldn't go low enough
+  if (prev_freq > desired_hfrosc_freq){
+    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
+    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
+    return cpu_freq;
+  }
+  
+  // We couldn't go high enough
+  if (cpu_freq < desired_hfrosc_freq){
+    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
+    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
+    return cpu_freq;
+  }
+
+  // Check for over/undershoot
+  switch(target) {
+  case(PRCI_FREQ_CLOSEST):
+    if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) {
+      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
+    } else {
+      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
+    }
+    break;
+  case(PRCI_FREQ_UNDERSHOOT):
+    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
+    break;
+  default:
+    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
+  }
+
+  cpu_freq =  PRCI_measure_mcycle_freq(1000, RTC_FREQ);
+  return cpu_freq;
+
+}
+
+#endif

bsp/hifive1/freedom-e-sdk/bsp/drivers/fe300prci/fe300prci_driver.h

@@ -0,0 +1,79 @@
+// See LICENSE file for license details
+
+#ifndef _FE300PRCI_DRIVER_H_
+#define _FE300PRCI_DRIVER_H_
+
+//__BEGIN_DECLS
+
+#include <unistd.h>
+
+typedef enum prci_freq_target {
+  
+  PRCI_FREQ_OVERSHOOT,
+  PRCI_FREQ_CLOSEST,
+  PRCI_FREQ_UNDERSHOOT
+
+} PRCI_freq_target;
+
+/* Measure and return the approximate frequency of the 
+ * CPU, as given by measuring the mcycle counter against 
+ * the mtime ticks.
+ */
+uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq);
+
+/* Safely switch over to the HFROSC using the given div
+ * and trim settings.
+ */
+void PRCI_use_hfrosc(int div, int trim);
+
+/* Safely switch over to the 16MHz HFXOSC,
+ * applying the finaldiv clock divider (1 is the lowest
+ * legal value).
+ */
+void PRCI_use_hfxosc(uint32_t finaldiv);
+
+/* Safely switch over to the PLL using the given
+ * settings.
+ * 
+ * Note that not all combinations of the inputs are actually
+ * legal, and this function does not check for their
+ * legality ("safely" means that this function won't turn off
+ * or glitch the clock the CPU is actually running off, but
+ * doesn't protect against you making it too fast or slow.)
+ */
+
+void PRCI_use_pll(int refsel, int bypass,
+			 int r, int f, int q, int finaldiv,
+			 int hfroscdiv, int hfrosctrim);
+
+/* Use the default clocks configured at reset.
+ * This is ~16Mhz HFROSC and turns off the LFROSC
+ * (on the current FE310 Dev Platforms, an external LFROSC is 
+ * used as it is more power efficient).
+ */
+void PRCI_use_default_clocks();
+
+/* This routine will adjust the HFROSC trim
+ * while using HFROSC as the clock source, 
+ * measure the resulting frequency, then
+ * use it as the PLL clock source, 
+ * in an attempt to get over, under, or close to the 
+ * requested frequency. It returns the actual measured 
+ * frequency. 
+ *
+ * Note that the requested frequency must be within the 
+ * range supported by the PLL so not all values are 
+ * achievable with this function, and not all 
+ * are guaranteed to actually work. The PLL
+ * is rated higher than the hardware.
+ * 
+ * There is no check on the desired f_cpu frequency, it
+ * is up to the user to specify something reasonable.
+ */
+
+uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target);
+
+//__END_DECLS
+
+#endif
+  

bsp/hifive1/freedom-e-sdk/bsp/drivers/plic/plic_driver.c

@@ -0,0 +1,127 @@
+// See LICENSE for license details.
+
+#include "sifive/devices/plic.h"
+#include "plic/plic_driver.h"
+#include "platform.h"
+#include "encoding.h"
+#include <string.h>
+
+
+// Note that there are no assertions or bounds checking on these
+// parameter values.
+
+void volatile_memzero(uint8_t * base, unsigned int size)
+{
+  volatile uint8_t * ptr;
+  for (ptr = base; ptr < (base + size); ptr++){
+    *ptr = 0;
+  }
+}
+
+void PLIC_init (
+                plic_instance_t * this_plic,
+                uintptr_t         base_addr,
+                uint32_t num_sources,
+                uint32_t num_priorities
+                )
+{
+  
+  this_plic->base_addr = base_addr;
+  this_plic->num_sources = num_sources;
+  this_plic->num_priorities = num_priorities;
+  
+  // Disable all interrupts (don't assume that these registers are reset).
+  unsigned long hart_id = read_csr(mhartid);
+  volatile_memzero((uint8_t*) (this_plic->base_addr +
+                               PLIC_ENABLE_OFFSET +
+                               (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET)),
+                   (num_sources + 8) / 8);
+  
+  // Set all priorities to 0 (equal priority -- don't assume that these are reset).
+  volatile_memzero ((uint8_t *)(this_plic->base_addr +
+                                PLIC_PRIORITY_OFFSET),
+                    (num_sources + 1) << PLIC_PRIORITY_SHIFT_PER_SOURCE);
+
+  // Set the threshold to 0.
+  volatile plic_threshold* threshold = (plic_threshold*)
+    (this_plic->base_addr +
+     PLIC_THRESHOLD_OFFSET +
+     (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET));
+
+  *threshold = 0;
+  
+}
+
+void PLIC_set_threshold (plic_instance_t * this_plic,
+			 plic_threshold threshold){
+
+  unsigned long hart_id = read_csr(mhartid);  
+  volatile plic_threshold* threshold_ptr = (plic_threshold*) (this_plic->base_addr +
+                                                              PLIC_THRESHOLD_OFFSET +
+                                                              (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET));
+
+  *threshold_ptr = threshold;
+
+}
+  
+
+void PLIC_enable_interrupt (plic_instance_t * this_plic, plic_source source){
+
+  unsigned long hart_id = read_csr(mhartid);
+  volatile uint8_t * current_ptr = (volatile uint8_t *)(this_plic->base_addr +
+                                                        PLIC_ENABLE_OFFSET +
+                                                        (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) +
+                                                        (source >> 3));
+  uint8_t current = *current_ptr;
+  current = current | ( 1 << (source & 0x7));
+  *current_ptr = current;
+
+}
+
+void PLIC_disable_interrupt (plic_instance_t * this_plic, plic_source source){
+  
+  unsigned long hart_id = read_csr(mhartid);
+  volatile uint8_t * current_ptr = (volatile uint8_t *) (this_plic->base_addr +
+                                                         PLIC_ENABLE_OFFSET +
+                                                         (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) +
+                                                         (source >> 3));
+  uint8_t current = *current_ptr;
+  current = current & ~(( 1 << (source & 0x7)));
+  *current_ptr = current;
+  
+}
+
+void PLIC_set_priority (plic_instance_t * this_plic, plic_source source, plic_priority priority){
+
+  if (this_plic->num_priorities > 0) {
+    volatile plic_priority * priority_ptr = (volatile plic_priority *)
+      (this_plic->base_addr +
+       PLIC_PRIORITY_OFFSET +
+       (source << PLIC_PRIORITY_SHIFT_PER_SOURCE));
+    *priority_ptr = priority;
+  }
+}
+
+plic_source PLIC_claim_interrupt(plic_instance_t * this_plic){
+  
+  unsigned long hart_id = read_csr(mhartid);
+
+  volatile plic_source * claim_addr = (volatile plic_source * )
+    (this_plic->base_addr +
+     PLIC_CLAIM_OFFSET +
+     (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET));
+
+  return  *claim_addr;
+  
+}
+
+void PLIC_complete_interrupt(plic_instance_t * this_plic, plic_source source){
+  
+  unsigned long hart_id = read_csr(mhartid);
+  volatile plic_source * claim_addr = (volatile plic_source *) (this_plic->base_addr +
+                                                                PLIC_CLAIM_OFFSET +
+                                                                (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET));
+  *claim_addr = source;
+  
+}
+

bsp/hifive1/freedom-e-sdk/bsp/drivers/plic/plic_driver.h

@@ -0,0 +1,51 @@
+// See LICENSE file for licence details
+
+#ifndef PLIC_DRIVER_H
+#define PLIC_DRIVER_H
+
+
+//__BEGIN_DECLS
+
+#include "platform.h"
+
+typedef struct __plic_instance_t
+{
+  uintptr_t base_addr;
+
+  uint32_t num_sources;
+  uint32_t num_priorities;
+  
+} plic_instance_t;
+
+typedef uint32_t plic_source;
+typedef uint32_t plic_priority;
+typedef uint32_t plic_threshold;
+
+void PLIC_init (
+                plic_instance_t * this_plic,
+                uintptr_t         base_addr,
+                uint32_t num_sources,
+                uint32_t num_priorities
+                );
+
+void PLIC_set_threshold (plic_instance_t * this_plic,
+			 plic_threshold threshold);
+  
+void PLIC_enable_interrupt (plic_instance_t * this_plic,
+			    plic_source source);
+
+void PLIC_disable_interrupt (plic_instance_t * this_plic,
+			     plic_source source);
+  
+void PLIC_set_priority (plic_instance_t * this_plic,
+			plic_source source,
+			plic_priority priority);
+
+plic_source PLIC_claim_interrupt(plic_instance_t * this_plic);
+
+void PLIC_complete_interrupt(plic_instance_t * this_plic,
+			     plic_source source);
+
+//__END_DECLS
+
+#endif

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-arty.h

@@ -0,0 +1,102 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_COREPLEXIP_ARTY_H
+#define _SIFIVE_COREPLEXIP_ARTY_H
+
+#include <stdint.h>
+
+/****************************************************************************
+ * GPIO Connections
+ *****************************************************************************/
+
+// These are the GPIO bit offsets for the directly driven
+// RGB LEDs on the Freedom Exx Coreplex IP Evaluation Arty FPGA Dev Kit.
+// Additional RGB LEDs are driven by the 3 PWM outputs.
+
+#define RED_LED_OFFSET   0
+#define GREEN_LED_OFFSET 1
+#define BLUE_LED_OFFSET  2
+
+// Switch 3 is used as a GPIO input. (Switch 0 is used to set
+// the reset vector, the other switches are unused).
+
+#define SW_3_OFFSET      3
+
+// These are the buttons which are mapped as inputs.
+
+#define HAS_BOARD_BUTTONS
+
+#define BUTTON_0_OFFSET  4
+#define BUTTON_1_OFFSET  5
+#define BUTTON_2_OFFSET  6
+#define BUTTON_3_OFFSET  7
+
+// These are the bit offsets for the different GPIO pins
+// mapped onto the PMOD A header.
+
+#define JA_0_OFFSET 8
+#define JA_1_OFFSET 9
+#define JA_2_OFFSET 10
+#define JA_3_OFFSET 11
+#define JA_4_OFFSET 12
+#define JA_5_OFFSET 13
+#define JA_6_OFFSET 14
+#define JA_7_OFFSET 15
+
+// The below gives a mapping between global interrupt
+// sources and their number. Note that on the coreplex
+// deliverable, the io_global_interrupts go directly into
+// the PLIC. The evaluation image on the FPGA mimics a
+// system with peripheral devices which are driving the
+// global interrupt lines.
+// So, on this image, in order to get an interrupt from
+// e.g. pressing BUTTON_0:
+// 1) Steps which are external to the delivery coreplex:
+//   a) The corresponding GPIO pin must be configured as in input
+//   b) The "interrupt on fall" bit must be set for the GPIO pin
+// 2) Steps which would also need to be performed for the delivery coreplex:
+//   a) The corresponding global interrupt, priority, and threshold must be configured in the PLIC.
+//   b) The external interrupt bit must be enabled in MSTATUS
+//   c) Interrupts must be enabled globally in the core.
+
+// Any of the above GPIO pins can be used as global interrupt
+// sources by adding their offset to the INT_GPIO_BASE.
+// For example, the buttons are shown here:
+
+#define INT_DEVICE_BUTTON_0 (GPIO_INT_BASE + BUTTON_0_OFFSET)
+#define INT_DEVICE_BUTTON_1 (GPIO_INT_BASE + BUTTON_1_OFFSET)
+#define INT_DEVICE_BUTTON_2 (GPIO_INT_BASE + BUTTON_2_OFFSET)
+#define INT_DEVICE_BUTTON_3 (GPIO_INT_BASE + BUTTON_3_OFFSET)
+
+// In addition, the Switches are mapped directly to
+// the PLIC (without going through the GPIO Peripheral).
+
+#define INT_EXT_DEVICE_SW_0 (EXTERNAL_INT_BASE + 0)
+#define INT_EXT_DEVICE_SW_1 (EXTERNAL_INT_BASE + 1)
+#define INT_EXT_DEVICE_SW_2 (EXTERNAL_INT_BASE + 2)
+#define INT_EXT_DEVICE_SW_3 (EXTERNAL_INT_BASE + 3)
+
+// This gives the mapping from inputs to LOCAL interrupts.
+
+#define LOCAL_INT_SW_0   0 
+#define LOCAL_INT_SW_1   1
+#define LOCAL_INT_SW_2   2 
+#define LOCAL_INT_SW_3   3
+#define LOCAL_INT_BTN_0  4
+#define LOCAL_INT_BTN_1  5
+#define LOCAL_INT_BTN_2  6
+#define LOCAL_INT_BTN_3  7
+#define LOCAL_INT_JA_0   8
+#define LOCAL_INT_JA_1   9
+#define LOCAL_INT_JA_2   10
+#define LOCAL_INT_JA_3   11
+#define LOCAL_INT_JA_4   12
+#define LOCAL_INT_JA_5   13
+#define LOCAL_INT_JA_6   14
+#define LOCAL_INT_JA_7   15
+
+#define RTC_FREQ 32768
+
+void write_hex(int fd, unsigned long int hex);
+
+#endif /* _SIFIVE_COREPLEXIP_ARTY_H */

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/flash.lds

@@ -0,0 +1,185 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+    
+
+    /* section information for finsh shell */
+    . = ALIGN(4);
+    __fsymtab_start = .;
+    KEEP(*(FSymTab))
+    __fsymtab_end = .;
+    . = ALIGN(4);
+    __vsymtab_start = .;
+    KEEP(*(VSymTab))
+    __vsymtab_end = .;
+    . = ALIGN(4);
+
+    . = ALIGN(4);
+    __rt_init_start = .;
+    KEEP(*(SORT(.rti_fn*)))
+    __rt_init_end = .;
+    . = ALIGN(4);
+
+    /* section information for modules */
+    . = ALIGN(4);
+    __rtmsymtab_start = .;
+    KEEP(*(RTMSymTab))
+    __rtmsymtab_end = .;
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/init.c

@@ -0,0 +1,98 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+#define CPU_FREQ 65000000
+#define XSTR(x) #x
+#define STR(x) XSTR(x)
+
+extern int main(int argc, char** argv);
+extern void trap_entry();
+
+static unsigned long get_cpu_freq()
+{
+  return CPU_FREQ;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+#ifdef USE_LOCAL_ISR
+typedef void (*my_interrupt_function_ptr_t) (void);
+extern my_interrupt_function_ptr_t localISR[];
+#endif
+
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+#ifdef USE_LOCAL_ISR
+  } else if (mcause & MCAUSE_INT) {
+    localISR[mcause & MCAUSE_CAUSE] ();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+  puts("core freq at " STR(CPU_FREQ) " Hz\n");
+
+  write_csr(mtvec, &trap_entry);
+  #endif
+}
+
+void _fini()
+{
+}

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/init.c.orig

@@ -0,0 +1,102 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+#define CPU_FREQ 65000000
+#define XSTR(x) #x
+#define STR(x) XSTR(x)
+
+extern int main(int argc, char** argv);
+extern void trap_entry();
+
+static unsigned long get_cpu_freq()
+{
+  return CPU_FREQ;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+#ifdef USE_LOCAL_ISR
+typedef void (*my_interrupt_function_ptr_t) (void);
+extern my_interrupt_function_ptr_t localISR[];
+#endif
+
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+#ifdef USE_LOCAL_ISR
+  } else if (mcause & MCAUSE_INT) {
+    localISR[mcause & MCAUSE_CAUSE] ();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+<<<<<<< HEAD
+  puts("core freq at " STR(CPU_FREQ) " Hz\n");
+=======
+  printf("core freq at %ld Hz\n", get_cpu_freq());
+>>>>>>> 120f19bbe91e5bda3c777de44618e58d5c8fc2c4
+
+  write_csr(mtvec, &trap_entry);
+  #endif
+}
+
+void _fini()
+{
+}

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/openocd.cfg

@@ -0,0 +1,31 @@
+# JTAG adapter setup
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+# Un-comment these two flash lines if you have a SPI flash and want to write
+# it.
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off
+echo "Ready for Remote Connections"

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/platform.h

@@ -0,0 +1,90 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+
+#if __riscv_xlen == 32
+#define MCAUSE_INT         0x80000000UL
+#define MCAUSE_CAUSE       0x7FFFFFFFUL
+#else
+#define MCAUSE_INT         0x8000000000000000UL
+#define MCAUSE_CAUSE       0x7FFFFFFFFFFFFFFFUL
+#endif
+
+#define IRQ_M_LOCAL        16
+#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
+
+#include "sifive/const.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
+#define RAM_MEM_ADDR _AC(0x80000000,UL)
+#define RAM_MEM_SIZE _AC(0x10000,UL)
+#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
+#define SPI0_MEM_ADDR _AC(0x40000000,UL)
+#define SPI0_MEM_SIZE _AC(0x20000000,UL)
+#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
+#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define UART0_CTRL_ADDR _AC(0x20000000,UL)
+
+// IOF masks
+
+// Interrupt numbers
+#define RESERVED_INT_BASE 0
+#define UART0_INT_BASE 1
+#define EXTERNAL_INT_BASE 2
+#define SPI0_INT_BASE 6
+#define GPIO_INT_BASE 7
+#define PWM0_INT_BASE 23
+
+// Helper functions
+#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
+// Bulk set bits in `reg` to either 0 or 1.
+// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
+// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
+#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
+
+// Misc
+
+#define NUM_GPIO 16
+
+#define PLIC_NUM_INTERRUPTS 28
+#define PLIC_NUM_PRIORITIES 7
+
+#define HAS_BOARD_BUTTONS
+
+#include "coreplexip-arty.h"
+
+#endif /* _SIFIVE_PLATFORM_H */

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e31-arty/scratchpad.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  ram PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >ram AT>ram :ram
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >ram AT>ram :ram
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >ram AT>ram :ram
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >ram AT>ram :ram
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >ram AT>ram :ram
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >ram AT>ram :ram
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >ram AT>ram :ram
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >ram AT>ram :ram
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >ram AT>ram :ram
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >ram AT>ram :ram
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>ram :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>ram :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += __stack_size;
+    PROVIDE( _sp = . );
+    PROVIDE( _heap_end = . );
+  } >ram AT>ram :ram
+}

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e51-arty/flash.lds

@@ -0,0 +1 @@
+../coreplexip-e31-arty/flash.lds

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e51-arty/init.c

@@ -0,0 +1 @@
+../coreplexip-e31-arty/init.c

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e51-arty/openocd.cfg

@@ -0,0 +1 @@
+../coreplexip-e31-arty/openocd.cfg

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e51-arty/platform.h

@@ -0,0 +1 @@
+../coreplexip-e31-arty/platform.h

bsp/hifive1/freedom-e-sdk/bsp/env/coreplexip-e51-arty/scratchpad.lds

@@ -0,0 +1 @@
+../coreplexip-e31-arty/scratchpad.lds

bsp/hifive1/freedom-e-sdk/bsp/env/entry.S

@@ -0,0 +1,97 @@
+// See LICENSE for license details
+
+#ifndef ENTRY_S
+#define ENTRY_S
+
+#include "encoding.h"
+#include "sifive/bits.h"
+
+  .section      .text.entry	
+  .align 2
+  .global trap_entry
+trap_entry:
+  addi sp, sp, -32*REGBYTES
+
+  STORE x1, 1*REGBYTES(sp)
+  STORE x2, 2*REGBYTES(sp)
+  STORE x3, 3*REGBYTES(sp)
+  STORE x4, 4*REGBYTES(sp)
+  STORE x5, 5*REGBYTES(sp)
+  STORE x6, 6*REGBYTES(sp)
+  STORE x7, 7*REGBYTES(sp)
+  STORE x8, 8*REGBYTES(sp)
+  STORE x9, 9*REGBYTES(sp)
+  STORE x10, 10*REGBYTES(sp)
+  STORE x11, 11*REGBYTES(sp)
+  STORE x12, 12*REGBYTES(sp)
+  STORE x13, 13*REGBYTES(sp)
+  STORE x14, 14*REGBYTES(sp)
+  STORE x15, 15*REGBYTES(sp)
+  STORE x16, 16*REGBYTES(sp)
+  STORE x17, 17*REGBYTES(sp)
+  STORE x18, 18*REGBYTES(sp)
+  STORE x19, 19*REGBYTES(sp)
+  STORE x20, 20*REGBYTES(sp)
+  STORE x21, 21*REGBYTES(sp)
+  STORE x22, 22*REGBYTES(sp)
+  STORE x23, 23*REGBYTES(sp)
+  STORE x24, 24*REGBYTES(sp)
+  STORE x25, 25*REGBYTES(sp)
+  STORE x26, 26*REGBYTES(sp)
+  STORE x27, 27*REGBYTES(sp)
+  STORE x28, 28*REGBYTES(sp)
+  STORE x29, 29*REGBYTES(sp)
+  STORE x30, 30*REGBYTES(sp)
+  STORE x31, 31*REGBYTES(sp)
+
+  csrr a0, mcause
+  csrr a1, mepc
+  mv a2, sp
+  call handle_trap
+  csrw mepc, a0
+
+  # Remain in M-mode after mret
+  li t0, MSTATUS_MPP
+  csrs mstatus, t0
+
+  LOAD x1, 1*REGBYTES(sp)
+  LOAD x2, 2*REGBYTES(sp)
+  LOAD x3, 3*REGBYTES(sp)
+  LOAD x4, 4*REGBYTES(sp)
+  LOAD x5, 5*REGBYTES(sp)
+  LOAD x6, 6*REGBYTES(sp)
+  LOAD x7, 7*REGBYTES(sp)
+  LOAD x8, 8*REGBYTES(sp)
+  LOAD x9, 9*REGBYTES(sp)
+  LOAD x10, 10*REGBYTES(sp)
+  LOAD x11, 11*REGBYTES(sp)
+  LOAD x12, 12*REGBYTES(sp)
+  LOAD x13, 13*REGBYTES(sp)
+  LOAD x14, 14*REGBYTES(sp)
+  LOAD x15, 15*REGBYTES(sp)
+  LOAD x16, 16*REGBYTES(sp)
+  LOAD x17, 17*REGBYTES(sp)
+  LOAD x18, 18*REGBYTES(sp)
+  LOAD x19, 19*REGBYTES(sp)
+  LOAD x20, 20*REGBYTES(sp)
+  LOAD x21, 21*REGBYTES(sp)
+  LOAD x22, 22*REGBYTES(sp)
+  LOAD x23, 23*REGBYTES(sp)
+  LOAD x24, 24*REGBYTES(sp)
+  LOAD x25, 25*REGBYTES(sp)
+  LOAD x26, 26*REGBYTES(sp)
+  LOAD x27, 27*REGBYTES(sp)
+  LOAD x28, 28*REGBYTES(sp)
+  LOAD x29, 29*REGBYTES(sp)
+  LOAD x30, 30*REGBYTES(sp)
+  LOAD x31, 31*REGBYTES(sp)
+
+  addi sp, sp, 32*REGBYTES
+  mret
+
+.weak handle_trap
+handle_trap:
+1:
+  j 1b
+	
+#endif

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-arty/flash.lds

@@ -0,0 +1 @@
+../freedom-e300-hifive1/flash.lds

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-arty/init.c

@@ -0,0 +1,87 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+extern int main(int argc, char** argv);
+extern void trap_entry();
+
+static unsigned long get_cpu_freq()
+{
+  return 65000000;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
+  GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
+  UART0_REG(UART_REG_DIV) = get_cpu_freq() / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+  printf("core freq at %d Hz\n", get_cpu_freq());
+
+  write_csr(mtvec, &trap_entry);
+  #endif
+}
+
+void _fini()
+{
+}

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-arty/openocd.cfg

@@ -0,0 +1,30 @@
+adapter_khz     10000
+
+#source [find interface/ftdi/olimex-arm-usb-tiny-h.cfg]
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+#
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME
+$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank my_first_flash fespi 0x20000000 0 0 0 $_TARGETNAME
+init
+#reset
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-arty/platform.h

@@ -0,0 +1,124 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+#define MCAUSE_INT         0x80000000
+#define MCAUSE_CAUSE       0x7FFFFFFF
+
+#include "sifive/const.h"
+#include "sifive/devices/aon.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
+#define SPI0_MMAP_ADDR _AC(0x20000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
+
+// IOF Mappings
+#define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
+#define SPI11_NUM_SS     (4)
+#define IOF_SPI1_SS0          (2u)
+#define IOF_SPI1_SS1          (8u)
+#define IOF_SPI1_SS2          (9u)
+#define IOF_SPI1_SS3          (10u)
+#define IOF_SPI1_MOSI         (3u)
+#define IOF_SPI1_MISO         (4u)
+#define IOF_SPI1_SCK          (5u)
+#define IOF_SPI1_DQ0          (3u)
+#define IOF_SPI1_DQ1          (4u)
+#define IOF_SPI1_DQ2          (6u)
+#define IOF_SPI1_DQ3          (7u)
+
+#define IOF0_SPI2_MASK          _AC(0xFC000000,UL)
+#define SPI2_NUM_SS       (1)
+#define IOF_SPI2_SS0          (26u)
+#define IOF_SPI2_MOSI         (27u)
+#define IOF_SPI2_MISO         (28u)
+#define IOF_SPI2_SCK          (29u)
+#define IOF_SPI2_DQ0          (27u)
+#define IOF_SPI2_DQ1          (28u)
+#define IOF_SPI2_DQ2          (30u)
+#define IOF_SPI2_DQ3          (31u)
+
+#define IOF0_UART0_MASK         _AC(0x00030000, UL)
+#define IOF_UART0_RX   (16u)
+#define IOF_UART0_TX   (17u)
+
+#define IOF0_UART1_MASK         _AC(0x03000000, UL)
+#define IOF_UART1_RX (24u)
+#define IOF_UART1_TX (25u)
+
+#define IOF1_PWM0_MASK          _AC(0x0000000F, UL)
+#define IOF1_PWM1_MASK          _AC(0x00780000, UL)
+#define IOF1_PWM2_MASK          _AC(0x00003C00, UL)
+
+// Interrupt Numbers
+#define INT_RESERVED 0
+#define INT_WDOGCMP 1
+#define INT_RTCCMP 2
+#define INT_UART0_BASE 3
+#define INT_UART1_BASE 4
+#define INT_SPI0_BASE 5
+#define INT_SPI1_BASE 6
+#define INT_SPI2_BASE 7
+#define INT_GPIO_BASE 8
+#define INT_PWM0_BASE 40
+#define INT_PWM1_BASE 44
+#define INT_PWM2_BASE 48
+
+// Helper functions
+#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
+#define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
+
+// Misc
+
+#include <stdint.h>
+
+
+#define NUM_GPIO 32
+
+#define PLIC_NUM_INTERRUPTS 52
+#define PLIC_NUM_PRIORITIES 7
+
+#define HAS_BOARD_BUTTONS
+#include "hifive1.h"
+
+unsigned long get_timer_freq(void);
+uint64_t get_timer_value(void);
+
+#endif /* _SIFIVE_PLATFORM_H */

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-hifive1/flash.lds

@@ -0,0 +1,185 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+
+    /* section information for finsh shell */
+    . = ALIGN(4);
+    __fsymtab_start = .;
+    KEEP(*(FSymTab))
+    __fsymtab_end = .;
+    . = ALIGN(4);
+    __vsymtab_start = .;
+    KEEP(*(VSymTab))
+    __vsymtab_end = .;
+    . = ALIGN(4);
+
+    . = ALIGN(4);
+    __rt_init_start = .;
+    KEEP(*(SORT(.rti_fn*)))
+    __rt_init_end = .;
+    . = ALIGN(4);
+
+    /* section information for modules */
+    . = ALIGN(4);
+    __rtmsymtab_start = .;
+    KEEP(*(RTMSymTab))
+    __rtmsymtab_end = .;
+
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-hifive1/init.c

@@ -0,0 +1,238 @@
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+extern int main(int argc, char** argv);
+extern void trap_entry();
+
+static unsigned long mtime_lo(void)
+{
+  return *(volatile unsigned long *)(CLINT_CTRL_ADDR + CLINT_MTIME);
+}
+
+#ifdef __riscv32
+
+static uint32_t mtime_hi(void)
+{
+  return *(volatile uint32_t *)(CLINT_CTRL_ADDR + CLINT_MTIME + 4);
+}
+
+uint64_t get_timer_value()
+{
+  while (1) {
+    uint32_t hi = mtime_hi();
+    uint32_t lo = mtime_lo();
+    if (hi == mtime_hi())
+      return ((uint64_t)hi << 32) | lo;
+  }
+}
+
+#else /* __riscv32 */
+
+uint64_t get_timer_value()
+{
+  return mtime_lo();
+}
+
+#endif
+
+unsigned long get_timer_freq()
+{
+  return 32768;
+}
+
+static void use_hfrosc(int div, int trim)
+{
+  // Make sure the HFROSC is running at its default setting
+  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
+  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0) ;
+  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
+}
+
+void use_pll(int refsel, int bypass, int r, int f, int q)
+{
+  // Ensure that we aren't running off the PLL before we mess with it.
+  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
+    // Make sure the HFROSC is running at its default setting
+    use_hfrosc(4, 16);
+  }
+
+  // Set PLL Source to be HFXOSC if available.
+  uint32_t config_value = 0;
+
+  config_value |= PLL_REFSEL(refsel);
+
+  if (bypass) {
+    // Bypass
+    config_value |= PLL_BYPASS(1);
+
+    PRCI_REG(PRCI_PLLCFG) = config_value;
+
+    // If we don't have an HFXTAL, this doesn't really matter.
+    // Set our Final output divide to divide-by-1:
+    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
+  } else {
+    // In case we are executing from QSPI,
+    // (which is quite likely) we need to
+    // set the QSPI clock divider appropriately
+    // before boosting the clock frequency.
+
+    // Div = f_sck/2
+    SPI0_REG(SPI_REG_SCKDIV) = 8;
+
+    // Set DIV Settings for PLL
+    // Both HFROSC and HFXOSC are modeled as ideal
+    // 16MHz sources (assuming dividers are set properly for
+    // HFROSC).
+    // (Legal values of f_REF are 6-48MHz)
+
+    // Set DIVR to divide-by-2 to get 8MHz frequency
+    // (legal values of f_R are 6-12 MHz)
+
+    config_value |= PLL_BYPASS(1);
+    config_value |= PLL_R(r);
+
+    // Set DIVF to get 512Mhz frequncy
+    // There is an implied multiply-by-2, 16Mhz.
+    // So need to write 32-1
+    // (legal values of f_F are 384-768 MHz)
+    config_value |= PLL_F(f);
+
+    // Set DIVQ to divide-by-2 to get 256 MHz frequency
+    // (legal values of f_Q are 50-400Mhz)
+    config_value |= PLL_Q(q);
+
+    // Set our Final output divide to divide-by-1:
+    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
+
+    PRCI_REG(PRCI_PLLCFG) = config_value;
+
+    // Un-Bypass the PLL.
+    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
+
+    // Wait for PLL Lock
+    // Note that the Lock signal can be glitchy.
+    // Need to wait 100 us
+    // RTC is running at 32kHz.
+    // So wait 4 ticks of RTC.
+    uint32_t now = mtime_lo();
+    while (mtime_lo() - now < 4) ;
+
+    // Now it is safe to check for PLL Lock
+    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0) ;
+  }
+
+  // Switch over to PLL Clock source
+  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
+}
+
+void use_default_clocks()
+{
+  // Turn off the LFROSC
+  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
+
+  // Use HFROSC
+  use_hfrosc(4, 16);
+}
+
+static unsigned long __attribute__((noinline)) measure_cpu_freq(size_t n)
+{
+  unsigned long start_mtime, delta_mtime;
+  unsigned long mtime_freq = get_timer_freq();
+
+  // Don't start measuruing until we see an mtime tick
+  unsigned long tmp = mtime_lo();
+  do {
+    start_mtime = mtime_lo();
+  } while (start_mtime == tmp);
+
+  unsigned long start_mcycle = read_csr(mcycle);
+
+  do {
+    delta_mtime = mtime_lo() - start_mtime;
+  } while (delta_mtime < n);
+
+  unsigned long delta_mcycle = read_csr(mcycle) - start_mcycle;
+
+  return (delta_mcycle / delta_mtime) * mtime_freq
+         + ((delta_mcycle % delta_mtime) * mtime_freq) / delta_mtime;
+}
+
+unsigned long get_cpu_freq()
+{
+  static uint32_t cpu_freq;
+
+  if (!cpu_freq) {
+    // warm up I$
+    measure_cpu_freq(1);
+    // measure for real
+    cpu_freq = measure_cpu_freq(10);
+  }
+
+  return cpu_freq;
+}
+
+static void uart_init(size_t baud_rate)
+{
+  GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
+  GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
+  UART0_REG(UART_REG_DIV) = get_cpu_freq() / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+  }
+  else {
+    write(1, "trap\n", 5);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+
+void _init()
+{
+
+  #ifndef NO_INIT
+  use_default_clocks();
+  use_pll(0, 0, 1, 31, 1);
+  uart_init(115200);
+
+  printf("core freq at %ld Hz\n", get_cpu_freq());
+
+  write_csr(mtvec, &trap_entry);
+  if (read_csr(misa) & (1 << ('F' - 'A'))) { // if F extension is present
+    write_csr(mstatus, MSTATUS_FS); // allow FPU instructions without trapping
+    write_csr(fcsr, 0); // initialize rounding mode, undefined at reset
+  }
+  #endif
+
+}
+
+void _fini()
+{
+}

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-hifive1/openocd.cfg

@@ -0,0 +1,34 @@
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0008 0x001b
+ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
+
+#Reset Stretcher logic on FE310 is ~1 second long
+#This doesn't apply if you use
+# ftdi_set_signal, but still good to document
+#adapter_nsrst_delay 1500
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME
+$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
+init
+#reset -- This type of reset is not implemented yet
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+  #Wait for the reset stretcher
+  #It will work without this, but
+  #will incur lots of delays for later commands.
+  sleep 1500
+}	
+halt
+#flash protect 0 64 last off

bsp/hifive1/freedom-e-sdk/bsp/env/freedom-e300-hifive1/platform.h

@@ -0,0 +1,133 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+#define MCAUSE_INT         0x80000000
+#define MCAUSE_CAUSE       0x7FFFFFFF
+
+#include "sifive/const.h"
+#include "sifive/devices/aon.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/otp.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/prci.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define MASKROM_MEM_ADDR _AC(0x00001000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define OTP_MEM_ADDR _AC(0x00020000,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
+#define PRCI_CTRL_ADDR _AC(0x10008000,UL)
+#define OTP_CTRL_ADDR _AC(0x10010000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
+#define SPI0_MEM_ADDR _AC(0x20000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
+
+// IOF masks
+#define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
+#define SPI11_NUM_SS     (4)
+#define IOF_SPI1_SS0          (2u)
+#define IOF_SPI1_SS1          (8u)
+#define IOF_SPI1_SS2          (9u)
+#define IOF_SPI1_SS3          (10u)
+#define IOF_SPI1_MOSI         (3u)
+#define IOF_SPI1_MISO         (4u)
+#define IOF_SPI1_SCK          (5u)
+#define IOF_SPI1_DQ0          (3u)
+#define IOF_SPI1_DQ1          (4u)
+#define IOF_SPI1_DQ2          (6u)
+#define IOF_SPI1_DQ3          (7u)
+
+#define IOF0_SPI2_MASK          _AC(0xFC000000,UL)
+#define SPI2_NUM_SS       (1)
+#define IOF_SPI2_SS0          (26u)
+#define IOF_SPI2_MOSI         (27u)
+#define IOF_SPI2_MISO         (28u)
+#define IOF_SPI2_SCK          (29u)
+#define IOF_SPI2_DQ0          (27u)
+#define IOF_SPI2_DQ1          (28u)
+#define IOF_SPI2_DQ2          (30u)
+#define IOF_SPI2_DQ3          (31u)
+
+//#define IOF0_I2C_MASK          _AC(0x00003000,UL)
+
+#define IOF0_UART0_MASK         _AC(0x00030000, UL)
+#define IOF_UART0_RX   (16u)
+#define IOF_UART0_TX   (17u)
+
+#define IOF0_UART1_MASK         _AC(0x03000000, UL)
+#define IOF_UART1_RX (24u)
+#define IOF_UART1_TX (25u)
+
+#define IOF1_PWM0_MASK          _AC(0x0000000F, UL)
+#define IOF1_PWM1_MASK          _AC(0x00780000, UL)
+#define IOF1_PWM2_MASK          _AC(0x00003C00, UL)
+
+// Interrupt numbers
+#define INT_RESERVED 0
+#define INT_WDOGCMP 1
+#define INT_RTCCMP 2
+#define INT_UART0_BASE 3
+#define INT_UART1_BASE 4
+#define INT_SPI0_BASE 5
+#define INT_SPI1_BASE 6
+#define INT_SPI2_BASE 7
+#define INT_GPIO_BASE 8
+#define INT_PWM0_BASE 40
+#define INT_PWM1_BASE 44
+#define INT_PWM2_BASE 48
+
+// Helper functions
+#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
+#define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
+
+// Misc
+
+#include <stdint.h>
+
+#define NUM_GPIO 32
+
+#define PLIC_NUM_INTERRUPTS 52
+#define PLIC_NUM_PRIORITIES 7
+
+#include "hifive1.h"
+
+unsigned long get_cpu_freq(void);
+unsigned long get_timer_freq(void);
+uint64_t get_timer_value(void);
+
+#endif /* _SIFIVE_PLATFORM_H */

bsp/hifive1/freedom-e-sdk/bsp/env/hifive1.h

@@ -0,0 +1,81 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_HIFIVE1_H
+#define _SIFIVE_HIFIVE1_H
+
+#include <stdint.h>
+
+/****************************************************************************
+ * GPIO Connections
+ *****************************************************************************/
+
+// These are the GPIO bit offsets for the RGB LED on HiFive1 Board.
+// These are also mapped to RGB LEDs on the Freedom E300 Arty
+// FPGA
+// Dev Kit.
+
+#define RED_LED_OFFSET   22
+#define GREEN_LED_OFFSET 19
+#define BLUE_LED_OFFSET  21
+
+// These are the GPIO bit offsets for the differen digital pins
+// on the headers for both the HiFive1 Board and the Freedom E300 Arty FPGA Dev Kit.
+#define PIN_0_OFFSET 16
+#define PIN_1_OFFSET 17
+#define PIN_2_OFFSET 18
+#define PIN_3_OFFSET 19
+#define PIN_4_OFFSET 20
+#define PIN_5_OFFSET 21
+#define PIN_6_OFFSET 22
+#define PIN_7_OFFSET 23
+#define PIN_8_OFFSET 0
+#define PIN_9_OFFSET 1
+#define PIN_10_OFFSET 2
+#define PIN_11_OFFSET 3
+#define PIN_12_OFFSET 4
+#define PIN_13_OFFSET 5
+//#define PIN_14_OFFSET 8 //This pin is not connected on either board.
+#define PIN_15_OFFSET 9
+#define PIN_16_OFFSET 10
+#define PIN_17_OFFSET 11
+#define PIN_18_OFFSET 12
+#define PIN_19_OFFSET 13
+
+// These are *PIN* numbers, not
+// GPIO Offset Numbers.
+#define PIN_SPI1_SCK    (13u)
+#define PIN_SPI1_MISO   (12u)
+#define PIN_SPI1_MOSI   (11u)
+#define PIN_SPI1_SS0    (10u)
+#define PIN_SPI1_SS1    (14u) 
+#define PIN_SPI1_SS2    (15u)
+#define PIN_SPI1_SS3    (16u)
+
+#define SS_PIN_TO_CS_ID(x) \
+  ((x==PIN_SPI1_SS0 ? 0 :		 \
+    (x==PIN_SPI1_SS1 ? 1 :		 \
+     (x==PIN_SPI1_SS2 ? 2 :		 \
+      (x==PIN_SPI1_SS3 ? 3 :		 \
+       -1))))) 
+
+
+// These buttons are present only on the Freedom E300 Arty Dev Kit.
+#ifdef HAS_BOARD_BUTTONS
+#define BUTTON_0_OFFSET 15
+#define BUTTON_1_OFFSET 30
+#define BUTTON_2_OFFSET 31
+
+#define INT_DEVICE_BUTTON_0 (INT_GPIO_BASE + BUTTON_0_OFFSET)
+#define INT_DEVICE_BUTTON_1 (INT_GPIO_BASE + BUTTON_1_OFFSET)
+#define INT_DEVICE_BUTTON_2 (INT_GPIO_BASE + BUTTON_2_OFFSET)
+
+#endif
+
+#define HAS_HFXOSC 1
+#define HAS_LFROSC_BYPASS 1
+
+#define RTC_FREQ 32768
+
+void write_hex(int fd, unsigned long int hex);
+
+#endif /* _SIFIVE_HIFIVE1_H */

bsp/hifive1/freedom-e-sdk/bsp/env/start.S

@@ -0,0 +1,111 @@
+// See LICENSE for license details.
+#include <sifive/smp.h>
+
+/* This is defined in sifive/platform.h, but that can't be included from
+ * assembly. */
+#define CLINT_CTRL_ADDR 0x02000000
+
+	.section .init
+	.globl _start
+	.type _start,@function
+
+_start:
+	.cfi_startproc
+	.cfi_undefined ra
+.option push
+.option norelax
+	la gp, __global_pointer$
+.option pop
+	la sp, _sp
+
+#if defined(ENABLE_SMP)
+	smp_pause(t0, t1)
+#endif
+
+	/* Load data section */
+	la a0, _data_lma
+	la a1, _data
+	la a2, _edata
+	bgeu a1, a2, 2f
+1:
+	lw t0, (a0)
+	sw t0, (a1)
+	addi a0, a0, 4
+	addi a1, a1, 4
+	bltu a1, a2, 1b
+2:
+
+	/* Clear bss section */
+	la a0, __bss_start
+	la a1, _end
+	bgeu a0, a1, 2f
+1:
+	sw zero, (a0)
+	addi a0, a0, 4
+	bltu a0, a1, 1b
+2:
+
+	/* Call global constructors */
+	//la a0, __libc_fini_array
+	//call atexit
+	//call __libc_init_array
+
+#ifndef __riscv_float_abi_soft
+	/* Enable FPU */
+	li t0, MSTATUS_FS
+	csrs mstatus, t0
+	csrr t1, mstatus
+	and t1, t1, t0
+	beqz t1, 1f
+	fssr x0
+1:
+#endif
+
+#if defined(ENABLE_SMP)
+	smp_resume(t0, t1)
+
+	csrr a0, mhartid
+	bnez a0, 2f
+#endif
+
+	auipc ra, 0
+	addi sp, sp, -16
+#if __riscv_xlen == 32
+	sw ra, 8(sp)
+#else
+	sd ra, 8(sp)
+#endif
+
+	/* argc = argv = 0 */
+	li a0, 0
+	li a1, 0
+	call entry
+	tail exit
+1:
+	j 1b
+
+#if defined(ENABLE_SMP)
+2:
+	la t0, trap_entry
+	csrw mtvec, t0
+
+	csrr a0, mhartid
+	la t1, _sp
+	slli t0, a0, 10
+	sub sp, t1, t0
+
+	auipc ra, 0
+	addi sp, sp, -16
+#if __riscv_xlen == 32
+	sw ra, 8(sp)
+#else
+	sd ra, 8(sp)
+#endif
+
+	call secondary_main
+	tail exit
+
+1:
+	j 1b
+#endif
+	.cfi_endproc

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/bits.h

@@ -0,0 +1,36 @@
+// See LICENSE for license details.
+#ifndef _RISCV_BITS_H
+#define _RISCV_BITS_H
+
+#define likely(x) __builtin_expect((x), 1)
+#define unlikely(x) __builtin_expect((x), 0)
+
+#define ROUNDUP(a, b) ((((a)-1)/(b)+1)*(b))
+#define ROUNDDOWN(a, b) ((a)/(b)*(b))
+
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#define CLAMP(a, lo, hi) MIN(MAX(a, lo), hi)
+
+#define EXTRACT_FIELD(val, which) (((val) & (which)) / ((which) & ~((which)-1)))
+#define INSERT_FIELD(val, which, fieldval) (((val) & ~(which)) | ((fieldval) * ((which) & ~((which)-1))))
+
+#define STR(x) XSTR(x)
+#define XSTR(x) #x
+
+#if __riscv_xlen == 64
+# define SLL32    sllw
+# define STORE    sd
+# define LOAD     ld
+# define LWU      lwu
+# define LOG_REGBYTES 3
+#else
+# define SLL32    sll
+# define STORE    sw
+# define LOAD     lw
+# define LWU      lw
+# define LOG_REGBYTES 2
+#endif
+#define REGBYTES (1 << LOG_REGBYTES)
+
+#endif

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/const.h

@@ -0,0 +1,18 @@
+// See LICENSE for license details.
+/* Derived from <linux/const.h> */
+
+#ifndef _SIFIVE_CONST_H
+#define _SIFIVE_CONST_H
+
+#ifdef __ASSEMBLER__
+#define _AC(X,Y)        X
+#define _AT(T,X)        X
+#else
+#define _AC(X,Y)        (X##Y)
+#define _AT(T,X)        ((T)(X))
+#endif /* !__ASSEMBLER__*/
+
+#define _BITUL(x)       (_AC(1,UL) << (x))
+#define _BITULL(x)      (_AC(1,ULL) << (x))
+
+#endif /* _SIFIVE_CONST_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/aon.h

@@ -0,0 +1,88 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_AON_H
+#define _SIFIVE_AON_H
+
+/* Register offsets */
+
+#define AON_WDOGCFG     0x000
+#define AON_WDOGCOUNT   0x008
+#define AON_WDOGS       0x010
+#define AON_WDOGFEED    0x018
+#define AON_WDOGKEY     0x01C
+#define AON_WDOGCMP     0x020
+
+#define AON_RTCCFG      0x040
+#define AON_RTCLO       0x048
+#define AON_RTCHI       0x04C
+#define AON_RTCS        0x050
+#define AON_RTCCMP      0x060
+
+#define AON_BACKUP0     0x080
+#define AON_BACKUP1     0x084
+#define AON_BACKUP2     0x088
+#define AON_BACKUP3     0x08C
+#define AON_BACKUP4     0x090
+#define AON_BACKUP5     0x094
+#define AON_BACKUP6     0x098
+#define AON_BACKUP7     0x09C
+#define AON_BACKUP8     0x0A0
+#define AON_BACKUP9     0x0A4
+#define AON_BACKUP10    0x0A8
+#define AON_BACKUP11    0x0AC
+#define AON_BACKUP12    0x0B0
+#define AON_BACKUP13    0x0B4
+#define AON_BACKUP14    0x0B8
+#define AON_BACKUP15    0x0BC
+
+#define AON_PMUWAKEUPI0 0x100
+#define AON_PMUWAKEUPI1 0x104
+#define AON_PMUWAKEUPI2 0x108
+#define AON_PMUWAKEUPI3 0x10C
+#define AON_PMUWAKEUPI4 0x110
+#define AON_PMUWAKEUPI5 0x114
+#define AON_PMUWAKEUPI6 0x118
+#define AON_PMUWAKEUPI7 0x11C
+#define AON_PMUSLEEPI0  0x120
+#define AON_PMUSLEEPI1  0x124
+#define AON_PMUSLEEPI2  0x128
+#define AON_PMUSLEEPI3  0x12C
+#define AON_PMUSLEEPI4  0x130
+#define AON_PMUSLEEPI5  0x134
+#define AON_PMUSLEEPI6  0x138
+#define AON_PMUSLEEPI7  0x13C
+#define AON_PMUIE       0x140
+#define AON_PMUCAUSE    0x144
+#define AON_PMUSLEEP    0x148
+#define AON_PMUKEY      0x14C
+
+#define AON_LFROSC      0x070
+/* Constants */
+
+#define AON_WDOGKEY_VALUE  0x51F15E
+#define AON_WDOGFEED_VALUE 0xD09F00D
+
+#define AON_WDOGCFG_SCALE       0x0000000F
+#define AON_WDOGCFG_RSTEN       0x00000100
+#define AON_WDOGCFG_ZEROCMP     0x00000200
+#define AON_WDOGCFG_ENALWAYS    0x00001000
+#define AON_WDOGCFG_ENCOREAWAKE 0x00002000
+#define AON_WDOGCFG_CMPIP       0x10000000
+
+#define AON_RTCCFG_SCALE     0x0000000F
+#define AON_RTCCFG_ENALWAYS  0x00001000
+#define AON_RTCCFG_CMPIP     0x10000000
+
+#define AON_WAKEUPCAUSE_RESET   0x00
+#define AON_WAKEUPCAUSE_RTC     0x01
+#define AON_WAKEUPCAUSE_DWAKEUP 0x02
+#define AON_WAKEUPCAUSE_AWAKEUP 0x03
+
+#define AON_RESETCAUSE_POWERON  0x0000
+#define AON_RESETCAUSE_EXTERNAL 0x0100
+#define AON_RESETCAUSE_WATCHDOG 0x0200
+
+#define AON_PMUCAUSE_WAKEUPCAUSE 0x00FF
+#define AON_PMUCAUSE_RESETCAUSE  0xFF00
+
+#endif /* _SIFIVE_AON_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/clint.h

@@ -0,0 +1,14 @@
+// See LICENSE for license details
+
+#ifndef _SIFIVE_CLINT_H
+#define _SIFIVE_CLINT_H
+
+
+#define CLINT_MSIP 0x0000
+#define CLINT_MSIP_size   0x4
+#define CLINT_MTIMECMP 0x4000
+#define CLINT_MTIMECMP_size 0x8
+#define CLINT_MTIME 0xBFF8
+#define CLINT_MTIME_size 0x8
+
+#endif /* _SIFIVE_CLINT_H */ 

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/gpio.h

@@ -0,0 +1,24 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_GPIO_H
+#define _SIFIVE_GPIO_H
+
+#define GPIO_INPUT_VAL  (0x00)
+#define GPIO_INPUT_EN   (0x04)
+#define GPIO_OUTPUT_EN  (0x08)
+#define GPIO_OUTPUT_VAL (0x0C)
+#define GPIO_PULLUP_EN  (0x10)
+#define GPIO_DRIVE      (0x14)
+#define GPIO_RISE_IE    (0x18)
+#define GPIO_RISE_IP    (0x1C)
+#define GPIO_FALL_IE    (0x20)
+#define GPIO_FALL_IP    (0x24)
+#define GPIO_HIGH_IE    (0x28)
+#define GPIO_HIGH_IP    (0x2C)
+#define GPIO_LOW_IE     (0x30)
+#define GPIO_LOW_IP     (0x34)
+#define GPIO_IOF_EN     (0x38)
+#define GPIO_IOF_SEL    (0x3C)
+#define GPIO_OUTPUT_XOR    (0x40)
+
+#endif /* _SIFIVE_GPIO_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/otp.h

@@ -0,0 +1,23 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_OTP_H
+#define _SIFIVE_OTP_H
+
+/* Register offsets */
+
+#define OTP_LOCK         0x00
+#define OTP_CK           0x04
+#define OTP_OE           0x08
+#define OTP_SEL          0x0C
+#define OTP_WE           0x10
+#define OTP_MR           0x14
+#define OTP_MRR          0x18
+#define OTP_MPP          0x1C
+#define OTP_VRREN        0x20
+#define OTP_VPPEN        0x24
+#define OTP_A            0x28
+#define OTP_D            0x2C
+#define OTP_Q            0x30
+#define OTP_READ_TIMINGS 0x34
+
+#endif

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/plic.h

@@ -0,0 +1,31 @@
+// See LICENSE for license details.
+
+#ifndef PLIC_H
+#define PLIC_H
+
+#include <sifive/const.h>
+
+// 32 bits per source
+#define PLIC_PRIORITY_OFFSET            _AC(0x0000,UL)
+#define PLIC_PRIORITY_SHIFT_PER_SOURCE  2
+// 1 bit per source (1 address)
+#define PLIC_PENDING_OFFSET             _AC(0x1000,UL)
+#define PLIC_PENDING_SHIFT_PER_SOURCE   0
+
+//0x80 per target
+#define PLIC_ENABLE_OFFSET              _AC(0x2000,UL)
+#define PLIC_ENABLE_SHIFT_PER_TARGET    7
+
+
+#define PLIC_THRESHOLD_OFFSET           _AC(0x200000,UL)
+#define PLIC_CLAIM_OFFSET               _AC(0x200004,UL)
+#define PLIC_THRESHOLD_SHIFT_PER_TARGET 12
+#define PLIC_CLAIM_SHIFT_PER_TARGET     12
+
+#define PLIC_MAX_SOURCE                 1023
+#define PLIC_SOURCE_MASK                0x3FF
+
+#define PLIC_MAX_TARGET                 15871
+#define PLIC_TARGET_MASK                0x3FFF
+
+#endif /* PLIC_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/prci.h

@@ -0,0 +1,56 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PRCI_H
+#define _SIFIVE_PRCI_H
+
+/* Register offsets */
+
+#define PRCI_HFROSCCFG   (0x0000)
+#define PRCI_HFXOSCCFG   (0x0004)
+#define PRCI_PLLCFG      (0x0008)
+#define PRCI_PLLDIV      (0x000C)
+#define PRCI_PROCMONCFG  (0x00F0)
+
+/* Fields */
+#define ROSC_DIV(x)    (((x) & 0x2F) << 0 ) 
+#define ROSC_TRIM(x)   (((x) & 0x1F) << 16)
+#define ROSC_EN(x)     (((x) & 0x1 ) << 30) 
+#define ROSC_RDY(x)    (((x) & 0x1 ) << 31)
+
+#define XOSC_EN(x)     (((x) & 0x1) << 30)
+#define XOSC_RDY(x)    (((x) & 0x1) << 31)
+
+#define PLL_R(x)       (((x) & 0x7)  << 0)
+// single reserved bit for F LSB.
+#define PLL_F(x)       (((x) & 0x3F) << 4)
+#define PLL_Q(x)       (((x) & 0x3)  << 10)
+#define PLL_SEL(x)     (((x) & 0x1)  << 16)
+#define PLL_REFSEL(x)  (((x) & 0x1)  << 17)
+#define PLL_BYPASS(x)  (((x) & 0x1)  << 18)
+#define PLL_LOCK(x)    (((x) & 0x1)  << 31)
+
+#define PLL_R_default 0x1
+#define PLL_F_default 0x1F
+#define PLL_Q_default 0x3
+
+#define PLL_REFSEL_HFROSC 0x0
+#define PLL_REFSEL_HFXOSC 0x1
+
+#define PLL_SEL_HFROSC 0x0
+#define PLL_SEL_PLL    0x1
+
+#define PLL_FINAL_DIV(x)      (((x) & 0x3F) << 0)
+#define PLL_FINAL_DIV_BY_1(x) (((x) & 0x1 ) << 8)
+
+#define PROCMON_DIV(x)   (((x) & 0x1F) << 0)
+#define PROCMON_TRIM(x)  (((x) & 0x1F) << 8)
+#define PROCMON_EN(x)    (((x) & 0x1)  << 16)
+#define PROCMON_SEL(x)   (((x) & 0x3)  << 24)
+#define PROCMON_NT_EN(x) (((x) & 0x1)  << 28)
+
+#define PROCMON_SEL_HFCLK     0
+#define PROCMON_SEL_HFXOSCIN  1
+#define PROCMON_SEL_PLLOUTDIV 2
+#define PROCMON_SEL_PROCMON   3
+
+#endif // _SIFIVE_PRCI_H

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/pwm.h

@@ -0,0 +1,37 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PWM_H
+#define _SIFIVE_PWM_H
+
+/* Register offsets */
+
+#define PWM_CFG   0x00
+#define PWM_COUNT 0x08
+#define PWM_S     0x10
+#define PWM_CMP0  0x20
+#define PWM_CMP1  0x24
+#define PWM_CMP2  0x28
+#define PWM_CMP3  0x2C
+
+/* Constants */
+
+#define PWM_CFG_SCALE       0x0000000F
+#define PWM_CFG_STICKY      0x00000100
+#define PWM_CFG_ZEROCMP     0x00000200
+#define PWM_CFG_DEGLITCH    0x00000400
+#define PWM_CFG_ENALWAYS    0x00001000
+#define PWM_CFG_ONESHOT     0x00002000
+#define PWM_CFG_CMP0CENTER  0x00010000
+#define PWM_CFG_CMP1CENTER  0x00020000
+#define PWM_CFG_CMP2CENTER  0x00040000
+#define PWM_CFG_CMP3CENTER  0x00080000
+#define PWM_CFG_CMP0GANG    0x01000000
+#define PWM_CFG_CMP1GANG    0x02000000
+#define PWM_CFG_CMP2GANG    0x04000000
+#define PWM_CFG_CMP3GANG    0x08000000
+#define PWM_CFG_CMP0IP      0x10000000
+#define PWM_CFG_CMP1IP      0x20000000
+#define PWM_CFG_CMP2IP      0x40000000
+#define PWM_CFG_CMP3IP      0x80000000
+
+#endif /* _SIFIVE_PWM_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/spi.h

@@ -0,0 +1,80 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_SPI_H
+#define _SIFIVE_SPI_H
+
+/* Register offsets */
+
+#define SPI_REG_SCKDIV          0x00
+#define SPI_REG_SCKMODE         0x04
+#define SPI_REG_CSID            0x10
+#define SPI_REG_CSDEF           0x14
+#define SPI_REG_CSMODE          0x18
+
+#define SPI_REG_DCSSCK          0x28
+#define SPI_REG_DSCKCS          0x2a
+#define SPI_REG_DINTERCS        0x2c
+#define SPI_REG_DINTERXFR       0x2e
+
+#define SPI_REG_FMT             0x40
+#define SPI_REG_TXFIFO          0x48
+#define SPI_REG_RXFIFO          0x4c
+#define SPI_REG_TXCTRL          0x50
+#define SPI_REG_RXCTRL          0x54
+
+#define SPI_REG_FCTRL           0x60
+#define SPI_REG_FFMT            0x64
+
+#define SPI_REG_IE              0x70
+#define SPI_REG_IP              0x74
+
+/* Fields */
+
+#define SPI_SCK_POL             0x1
+#define SPI_SCK_PHA             0x2
+
+#define SPI_FMT_PROTO(x)        ((x) & 0x3)
+#define SPI_FMT_ENDIAN(x)       (((x) & 0x1) << 2)
+#define SPI_FMT_DIR(x)          (((x) & 0x1) << 3)
+#define SPI_FMT_LEN(x)          (((x) & 0xf) << 16)
+
+/* TXCTRL register */
+#define SPI_TXWM(x)             ((x) & 0xffff)
+/* RXCTRL register */
+#define SPI_RXWM(x)             ((x) & 0xffff)
+
+#define SPI_IP_TXWM             0x1
+#define SPI_IP_RXWM             0x2
+
+#define SPI_FCTRL_EN            0x1
+
+#define SPI_INSN_CMD_EN         0x1
+#define SPI_INSN_ADDR_LEN(x)    (((x) & 0x7) << 1)
+#define SPI_INSN_PAD_CNT(x)     (((x) & 0xf) << 4)
+#define SPI_INSN_CMD_PROTO(x)   (((x) & 0x3) << 8)
+#define SPI_INSN_ADDR_PROTO(x)  (((x) & 0x3) << 10)
+#define SPI_INSN_DATA_PROTO(x)  (((x) & 0x3) << 12)
+#define SPI_INSN_CMD_CODE(x)    (((x) & 0xff) << 16)
+#define SPI_INSN_PAD_CODE(x)    (((x) & 0xff) << 24)
+
+#define SPI_TXFIFO_FULL  (1 << 31)   
+#define SPI_RXFIFO_EMPTY (1 << 31)   
+
+/* Values */
+
+#define SPI_CSMODE_AUTO         0
+#define SPI_CSMODE_HOLD         2
+#define SPI_CSMODE_OFF          3
+
+#define SPI_DIR_RX              0
+#define SPI_DIR_TX              1
+
+#define SPI_PROTO_S             0
+#define SPI_PROTO_D             1
+#define SPI_PROTO_Q             2
+
+#define SPI_ENDIAN_MSB          0
+#define SPI_ENDIAN_LSB          1
+
+
+#endif /* _SIFIVE_SPI_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/devices/uart.h

@@ -0,0 +1,27 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_UART_H
+#define _SIFIVE_UART_H
+
+/* Register offsets */
+#define UART_REG_TXFIFO         0x00
+#define UART_REG_RXFIFO         0x04
+#define UART_REG_TXCTRL         0x08
+#define UART_REG_RXCTRL         0x0c
+#define UART_REG_IE             0x10
+#define UART_REG_IP             0x14
+#define UART_REG_DIV            0x18
+
+/* TXCTRL register */
+#define UART_TXEN               0x1
+#define UART_TXWM(x)            (((x) & 0xffff) << 16)
+
+/* RXCTRL register */
+#define UART_RXEN               0x1
+#define UART_RXWM(x)            (((x) & 0xffff) << 16)
+
+/* IP register */
+#define UART_IP_TXWM            0x1
+#define UART_IP_RXWM            0x2
+
+#endif /* _SIFIVE_UART_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/sections.h

@@ -0,0 +1,17 @@
+// See LICENSE for license details.
+#ifndef _SECTIONS_H
+#define _SECTIONS_H
+
+extern unsigned char _rom[];
+extern unsigned char _rom_end[];
+
+extern unsigned char _ram[];
+extern unsigned char _ram_end[];
+
+extern unsigned char _ftext[];
+extern unsigned char _etext[];
+extern unsigned char _fbss[];
+extern unsigned char _ebss[];
+extern unsigned char _end[];
+
+#endif /* _SECTIONS_H */

bsp/hifive1/freedom-e-sdk/bsp/include/sifive/smp.h

@@ -0,0 +1,65 @@
+#ifndef SIFIVE_SMP
+#define SIFIVE_SMP
+
+// The maximum number of HARTs this code supports
+#ifndef MAX_HARTS
+#define MAX_HARTS 32
+#endif
+#define CLINT_END_HART_IPI CLINT_CTRL_ADDR + (MAX_HARTS*4)
+
+// The hart that non-SMP tests should run on
+#ifndef NONSMP_HART
+#define NONSMP_HART 0
+#endif
+
+/* If your test cannot handle multiple-threads, use this: 
+ *   smp_disable(reg1)
+ */
+#define smp_disable(reg1, reg2)			 \
+  csrr reg1, mhartid				;\
+  li   reg2, NONSMP_HART			;\
+  beq  reg1, reg2, hart0_entry			;\
+42:						;\
+  wfi    					;\
+  j 42b						;\
+hart0_entry:
+
+/* If your test needs to temporarily block multiple-threads, do this:
+ *    smp_pause(reg1, reg2)
+ *    ... single-threaded work ...
+ *    smp_resume(reg1, reg2)
+ *    ... multi-threaded work ...
+ */
+
+#define smp_pause(reg1, reg2)	 \
+  li reg2, 0x8			;\
+  csrw mie, reg2		;\
+  csrr reg2, mhartid		;\
+  bnez reg2, 42f
+
+#define smp_resume(reg1, reg2)	 \
+  li reg1, CLINT_CTRL_ADDR	;\
+41:				;\
+  li reg2, 1			;\
+  sw reg2, 0(reg1)		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b		;\
+42:				;\
+  wfi    			;\
+  csrr reg2, mip		;\
+  andi reg2, reg2, 0x8		;\
+  beqz reg2, 42b		;\
+  li reg1, CLINT_CTRL_ADDR	;\
+  csrr reg2, mhartid		;\
+  slli reg2, reg2, 2		;\
+  add reg2, reg2, reg1		;\
+  sw zero, 0(reg2)		;\
+41:				;\
+  lw reg2, 0(reg1)		;\
+  bnez reg2, 41b		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b
+
+#endif

bsp/hifive1/openocd.cfg

@@ -0,0 +1,34 @@
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0008 0x001b
+ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
+
+#Reset Stretcher logic on FE310 is ~1 second long
+#This doesn't apply if you use
+# ftdi_set_signal, but still good to document
+#adapter_nsrst_delay 1500
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME
+$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
+init
+#reset -- This type of reset is not implemented yet
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+  #Wait for the reset stretcher
+  #It will work without this, but
+  #will incur lots of delays for later commands.
+  sleep 1500
+}	
+halt
+flash protect 0 64 last off

bsp/hifive1/openocd.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+openocd -f openocd.cfg & riscv64-unknown-elf-gdb rtthread.elf --batch -ex "set remotetimeout 240" -ex "target extended-remote localhost:3333" -ex "monitor reset halt" -ex "monitor flash protect 0 64 last off" -ex "load" -ex "monitor resume" -ex "monitor shutdown" -ex "quit" && \
+echo "Successfully uploaded 'hello' to freedom-e300-hifive1."
+

bsp/hifive1/rtconfig.h

@@ -0,0 +1,138 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 32
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_256
+#define RT_THREAD_PRIORITY_MAX 256
+#define RT_TICK_PER_SECOND 100
+#define RT_DEBUG
+#define RT_USING_OVERFLOW_CHECK
+#define RT_DEBUG_INIT 0
+#define RT_DEBUG_THREAD 0
+#define RT_USING_HOOK
+#define IDLE_THREAD_STACK_SIZE 1024
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_MEMTRACE
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "dusart"
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_USING_MSH_ONLY
+
+/* Device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_USING_SERIAL
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_USING_LIBC
+
+/* Network stack */
+
+/* light weight TCP/IP stack */
+
+
+/* Modbus master and slave stack */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread online packages */
+
+/* system packages */
+
+/* RT-Thread GUI Engine */
+
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* miscellaneous packages */
+
+
+/* example package: hello */
+
+
+/* Privated Packages of RealThread */
+
+
+/* Network Utilities */
+
+
+#endif

bsp/hifive1/rtconfig.py

@@ -0,0 +1,60 @@
+import os
+ARCH     = 'risc-v'
+CPU      = 'e310'
+# toolchains options
+CROSS_TOOL  = 'gcc'
+
+#------- toolchains path -------------------------------------------------------
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    # EXEC_PATH   = '/home/tanek/risc-v/e300/riscv64-unknown-elf-gcc-20170612-x86_64-linux-centos6/bin'
+    EXEC_PATH   = '/home/tanek/risc-v/e300/riscv64-unknown-elf-gcc-20171231-x86_64-linux-centos6/bin'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+#BUILD = 'debug'
+BUILD = 'release'
+
+CORE = 'risc-v'
+MAP_FILE = 'rtthread.map'
+LINK_FILE = './freedom-e-sdk/bsp/env/freedom-e300-hifive1/flash.lds'
+TARGET_NAME = 'rtthread.bin'
+
+#------- GCC settings ----------------------------------------------------------
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'riscv64-unknown-elf-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -march=rv32imac -mabi=ilp32 -DUSE_PLIC -DUSE_M_TIME -DNO_INIT -mcmodel=medany -msmall-data-limit=8  -g -L.  -nostartfiles  -lc '
+    CFLAGS = DEVICE
+    CFLAGS += ' -save-temps=obj'
+    AFLAGS = '-c'+ DEVICE + ' -x assembler-with-cpp'
+    AFLAGS += ' -Iplatform -Ifreedom-e-sdk/bsp/include -Ifreedom-e-sdk/bsp/env'
+    LFLAGS = DEVICE
+    LFLAGS += ' -Wl,--gc-sections,-cref,-Map=' + MAP_FILE
+    LFLAGS += ' -T ' + LINK_FILE
+    LFLAGS += ' -Wl,-wrap=memset'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET ' + TARGET_NAME + '\n'
+    POST_ACTION += SIZE + ' $TARGET\n'

libcpu/risc-v/e310/SConscript

@@ -0,0 +1,13 @@
+Import('rtconfig')
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Glob('*.c')
+CPPPATH = [cwd]
+
+if rtconfig.PLATFORM == 'gcc':
+    src += Glob('*_gcc.S')
+
+group = DefineGroup('libcpu', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

libcpu/risc-v/e310/context_gcc.S

@@ -0,0 +1,227 @@
+;/*
+; * File      : context_gcc.S
+; * This file is part of RT-Thread RTOS
+; * COPYRIGHT (C) 2018, RT-Thread Development Team
+; *
+; *  This program is free software; you can redistribute it and/or modify
+; *  it under the terms of the GNU General Public License as published by
+; *  the Free Software Foundation; either version 2 of the License, or
+; *  (at your option) any later version.
+; *
+; *  This program is distributed in the hope that it will be useful,
+; *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+; *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+; *  GNU General Public License for more details.
+; *
+; *  You should have received a copy of the GNU General Public License along
+; *  with this program; if not, write to the Free Software Foundation, Inc.,
+; *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+; *
+; * Change Logs:
+; * Date           Author       Notes
+; * 2017-07-16     zhangjun     for hifive1
+; * 2018-05-29     tanek        optimize  rt_hw_interrupt_*
+; * 2018-05-29     tanek        add mie register to context
+; */
+
+/*
+ * rt_base_t rt_hw_interrupt_disable(void);
+ */
+    .globl rt_hw_interrupt_disable
+rt_hw_interrupt_disable:
+    csrrci a0, mstatus, 8
+    ret
+
+/*
+ * void rt_hw_interrupt_enable(rt_base_t level);
+ */
+    .globl rt_hw_interrupt_enable
+rt_hw_interrupt_enable:
+    csrw mstatus, a0
+    ret
+
+/*
+ * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
+ * a0 --> from
+ * a1 --> to
+ */
+    .globl rt_hw_context_switch
+rt_hw_context_switch:
+
+    /* saved from thread context
+     *     x1/ra       -> sp(0)
+     *     x1/ra       -> sp(1)
+     *     mstatus.mie -> sp(2)
+     *     x(i)        -> sp(i-4)
+     */
+    addi  sp,  sp, -32 * 4
+    sw sp,  (a0)
+
+    sw x1,   0 * 4(sp)
+    sw x1,   1 * 4(sp)
+
+    csrr a0, mstatus
+    andi a0, a0, 8
+    beqz a0, save_mpie
+    li   a0, 0x80
+save_mpie:
+    sw a0,   2 * 4(sp)
+
+    sw x4,   4 * 4(sp)
+    sw x5,   5 * 4(sp)
+    sw x6,   6 * 4(sp)
+    sw x7,   7 * 4(sp)
+    sw x8,   8 * 4(sp)
+    sw x9,   9 * 4(sp)
+    sw x10, 10 * 4(sp)
+    sw x11, 11 * 4(sp)
+    sw x12, 12 * 4(sp)
+    sw x13, 13 * 4(sp)
+    sw x14, 14 * 4(sp)
+    sw x15, 15 * 4(sp)
+    sw x16, 16 * 4(sp)
+    sw x17, 17 * 4(sp)
+    sw x18, 18 * 4(sp)
+    sw x19, 19 * 4(sp)
+    sw x20, 20 * 4(sp)
+    sw x21, 21 * 4(sp)
+    sw x22, 22 * 4(sp)
+    sw x23, 23 * 4(sp)
+    sw x24, 24 * 4(sp)
+    sw x25, 25 * 4(sp)
+    sw x26, 26 * 4(sp)
+    sw x27, 27 * 4(sp)
+    sw x28, 28 * 4(sp)
+    sw x29, 29 * 4(sp)
+    sw x30, 30 * 4(sp)
+    sw x31, 31 * 4(sp)
+
+    /* restore to thread context
+     * sp(0) -> epc;
+     * sp(1) -> ra;
+     * sp(i) -> x(i+2)
+     */
+    lw sp,  (a1)
+
+    /* resw ra to mepc */
+    lw a1,   0 * 4(sp)
+    csrw mepc, a1
+    lw x1,   1 * 4(sp)
+
+    /* force to machin mode(MPP=11) */
+    li a1, 0x00001800;
+    csrs mstatus, a1
+    lw a1,   2 * 4(sp)
+    csrs mstatus, a1
+
+    lw x4,   4 * 4(sp)
+    lw x5,   5 * 4(sp)
+    lw x6,   6 * 4(sp)
+    lw x7,   7 * 4(sp)
+    lw x8,   8 * 4(sp)
+    lw x9,   9 * 4(sp)
+    lw x10, 10 * 4(sp)
+    lw x11, 11 * 4(sp)
+    lw x12, 12 * 4(sp)
+    lw x13, 13 * 4(sp)
+    lw x14, 14 * 4(sp)
+    lw x15, 15 * 4(sp)
+    lw x16, 16 * 4(sp)
+    lw x17, 17 * 4(sp)
+    lw x18, 18 * 4(sp)
+    lw x19, 19 * 4(sp)
+    lw x20, 20 * 4(sp)
+    lw x21, 21 * 4(sp)
+    lw x22, 22 * 4(sp)
+    lw x23, 23 * 4(sp)
+    lw x24, 24 * 4(sp)
+    lw x25, 25 * 4(sp)
+    lw x26, 26 * 4(sp)
+    lw x27, 27 * 4(sp)
+    lw x28, 28 * 4(sp)
+    lw x29, 29 * 4(sp)
+    lw x30, 30 * 4(sp)
+    lw x31, 31 * 4(sp)
+
+    addi sp,  sp, 32 * 4
+    mret
+
+/*
+ * void rt_hw_context_switch_to(rt_uint32 to);
+ * a0 --> to
+ */
+    .globl rt_hw_context_switch_to
+rt_hw_context_switch_to:
+    lw sp, (a0)
+
+    /* load epc from stack */
+    lw a0,   0 * 4(sp)
+    csrw mepc, a0
+    lw x1,   1 * 4(sp)
+    /* load mstatus from stack */
+    lw a0,   2 * 4(sp)
+    csrw mstatus, a0
+    lw x4,   4 * 4(sp)
+    lw x5,   5 * 4(sp)
+    lw x6,   6 * 4(sp)
+    lw x7,   7 * 4(sp)
+    lw x8,   8 * 4(sp)
+    lw x9,   9 * 4(sp)
+    lw x10, 10 * 4(sp)
+    lw x11, 11 * 4(sp)
+    lw x12, 12 * 4(sp)
+    lw x13, 13 * 4(sp)
+    lw x14, 14 * 4(sp)
+    lw x15, 15 * 4(sp)
+    lw x16, 16 * 4(sp)
+    lw x17, 17 * 4(sp)
+    lw x18, 18 * 4(sp)
+    lw x19, 19 * 4(sp)
+    lw x20, 20 * 4(sp)
+    lw x21, 21 * 4(sp)
+    lw x22, 22 * 4(sp)
+    lw x23, 23 * 4(sp)
+    lw x24, 24 * 4(sp)
+    lw x25, 25 * 4(sp)
+    lw x26, 26 * 4(sp)
+    lw x27, 27 * 4(sp)
+    lw x28, 28 * 4(sp)
+    lw x29, 29 * 4(sp)
+    lw x30, 30 * 4(sp)
+    lw x31, 31 * 4(sp)
+
+    addi sp,  sp, 32 * 4
+    mret
+
+/*
+ * void rt_hw_context_switch_interrupt(rt_uint32 from, rt_uint32 to);
+ */
+    .globl rt_thread_switch_interrupt_flag
+    .globl rt_interrupt_from_thread
+    .globl rt_interrupt_to_thread
+    .globl rt_hw_context_switch_interrupt
+rt_hw_context_switch_interrupt:
+    addi sp, sp, -16
+    sw   s0, 12(sp)
+    sw   a0, 8(sp)
+    sw   a5, 4(sp)
+
+    la   a0, rt_thread_switch_interrupt_flag
+    lw   a5, (a0)
+    bnez a5, _reswitch
+    li   a5, 1
+    sw   a5, (a0)
+
+    la   a5, rt_interrupt_from_thread
+    lw   a0, 8(sp)
+    sw   a0, (a5)
+
+_reswitch:
+    la   a5, rt_interrupt_to_thread
+    sw   a1, (a5)
+
+    lw   a5, 4(sp)
+    lw   a0, 8(sp)
+    lw   s0, 12(sp)
+    addi sp, sp, 16
+    ret

libcpu/risc-v/e310/entry_gcc.S

@@ -0,0 +1,145 @@
+/*
+ * File      : context_gcc.S
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2018, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-05-29     tanek        first implementation
+ */
+
+  .section      .text.entry
+  .align 2
+  .global trap_entry
+trap_entry:
+
+    // save all from thread context
+    addi sp, sp, -32 * 4
+
+    sw x1,   1 * 4(sp)
+    li t0, 0x80
+    sw t0,   2 * 4(sp)
+
+    sw x4,   4 * 4(sp)
+    sw x5,   5 * 4(sp)
+    sw x6,   6 * 4(sp)
+    sw x7,   7 * 4(sp)
+    sw x8,   8 * 4(sp)
+    sw x9,   9 * 4(sp)
+    sw x10, 10 * 4(sp)
+    sw x11, 11 * 4(sp)
+    sw x12, 12 * 4(sp)
+    sw x13, 13 * 4(sp)
+    sw x14, 14 * 4(sp)
+    sw x15, 15 * 4(sp)
+    sw x16, 16 * 4(sp)
+    sw x17, 17 * 4(sp)
+    sw x18, 18 * 4(sp)
+    sw x19, 19 * 4(sp)
+    sw x20, 20 * 4(sp)
+    sw x21, 21 * 4(sp)
+    sw x22, 22 * 4(sp)
+    sw x23, 23 * 4(sp)
+    sw x24, 24 * 4(sp)
+    sw x25, 25 * 4(sp)
+    sw x26, 26 * 4(sp)
+    sw x27, 27 * 4(sp)
+    sw x28, 28 * 4(sp)
+    sw x29, 29 * 4(sp)
+    sw x30, 30 * 4(sp)
+    sw x31, 31 * 4(sp)
+
+    // switch to interrupt stack
+    move s0, sp
+    la   sp, _sp
+
+    // interrupt handle
+    call rt_interrupt_enter
+    csrr a0, mcause
+    csrr a1, mepc
+    mv a2, sp
+    call handle_trap
+    call rt_interrupt_leave
+
+    // switch to from thread stack
+    move sp, s0
+
+    // need to switch new thread
+    la   s0, rt_thread_switch_interrupt_flag
+    lw   s2, 0(s0)
+    beqz s2, spurious_interrupt
+    sw   zero, 0(s0)
+
+    csrr a0, mepc
+    sw a0,  0 * 4(sp)
+
+    la   s0, rt_interrupt_from_thread
+    lw   s1, 0(s0)
+    sw   sp, 0(s1)
+
+    la   s0, rt_interrupt_to_thread
+    lw   s1, 0(s0)
+    lw   sp, 0(s1)
+
+    lw  a0,  0 * 4(sp)
+    csrw mepc, a0
+
+spurious_interrupt:
+    lw x1,   1 * 4(sp)
+    
+    // Remain in M-mode after mret
+    li t0, 0x00001800
+    csrs mstatus, t0
+    lw t0,   2 * 4(sp)
+    csrs mstatus, t0 
+    
+    lw x4,   4 * 4(sp)
+    lw x5,   5 * 4(sp)
+    lw x6,   6 * 4(sp)
+    lw x7,   7 * 4(sp)
+    lw x8,   8 * 4(sp)
+    lw x9,   9 * 4(sp)
+    lw x10, 10 * 4(sp)
+    lw x11, 11 * 4(sp)
+    lw x12, 12 * 4(sp)
+    lw x13, 13 * 4(sp)
+    lw x14, 14 * 4(sp)
+    lw x15, 15 * 4(sp)
+    lw x16, 16 * 4(sp)
+    lw x17, 17 * 4(sp)
+    lw x18, 18 * 4(sp)
+    lw x19, 19 * 4(sp)
+    lw x20, 20 * 4(sp)
+    lw x21, 21 * 4(sp)
+    lw x22, 22 * 4(sp)
+    lw x23, 23 * 4(sp)
+    lw x24, 24 * 4(sp)
+    lw x25, 25 * 4(sp)
+    lw x26, 26 * 4(sp)
+    lw x27, 27 * 4(sp)
+    lw x28, 28 * 4(sp)
+    lw x29, 29 * 4(sp)
+    lw x30, 30 * 4(sp)
+    lw x31, 31 * 4(sp)
+
+    addi sp, sp, 32 * 4
+    mret
+
+.weak handle_trap
+handle_trap:
+1:
+    j 1b

libcpu/risc-v/e310/stack.c

@@ -0,0 +1,104 @@
+/*
+ * File      : stack.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2017-07-31     tanek        first implementation
+ */
+
+#include <rtthread.h>
+
+/* flag in interrupt handling */
+rt_uint32_t rt_interrupt_from_thread;
+rt_uint32_t rt_interrupt_to_thread;
+rt_uint32_t rt_thread_switch_interrupt_flag;
+
+struct stack_frame
+{
+    rt_ubase_t epc;        /* epc - epc    - program counter                     */
+    rt_ubase_t ra;         /* x1  - ra     - return address for jumps            */
+    rt_ubase_t mstatus;    /*              - machine status register             */
+    rt_ubase_t gp;         /* x3  - gp     - global pointer                      */
+    rt_ubase_t tp;         /* x4  - tp     - thread pointer                      */
+    rt_ubase_t t0;         /* x5  - t0     - temporary register 0                */
+    rt_ubase_t t1;         /* x6  - t1     - temporary register 1                */
+    rt_ubase_t t2;         /* x7  - t2     - temporary register 2                */
+    rt_ubase_t s0_fp;      /* x8  - s0/fp  - saved register 0 or frame pointer   */
+    rt_ubase_t s1;         /* x9  - s1     - saved register 1                    */
+    rt_ubase_t a0;         /* x10 - a0     - return value or function argument 0 */
+    rt_ubase_t a1;         /* x11 - a1     - return value or function argument 1 */
+    rt_ubase_t a2;         /* x12 - a2     - function argument 2                 */
+    rt_ubase_t a3;         /* x13 - a3     - function argument 3                 */
+    rt_ubase_t a4;         /* x14 - a4     - function argument 4                 */
+    rt_ubase_t a5;         /* x15 - a5     - function argument 5                 */
+    rt_ubase_t a6;         /* x16 - a6     - function argument 6                 */
+    rt_ubase_t a7;         /* x17 - s7     - function argument 7                 */
+    rt_ubase_t s2;         /* x18 - s2     - saved register 2                    */
+    rt_ubase_t s3;         /* x19 - s3     - saved register 3                    */
+    rt_ubase_t s4;         /* x20 - s4     - saved register 4                    */
+    rt_ubase_t s5;         /* x21 - s5     - saved register 5                    */
+    rt_ubase_t s6;         /* x22 - s6     - saved register 6                    */
+    rt_ubase_t s7;         /* x23 - s7     - saved register 7                    */
+    rt_ubase_t s8;         /* x24 - s8     - saved register 8                    */
+    rt_ubase_t s9;         /* x25 - s9     - saved register 9                    */
+    rt_ubase_t s10;        /* x26 - s10    - saved register 10                   */
+    rt_ubase_t s11;        /* x27 - s11    - saved register 11                   */
+    rt_ubase_t t3;         /* x28 - t3     - temporary register 3                */
+    rt_ubase_t t4;         /* x29 - t4     - temporary register 4                */
+    rt_ubase_t t5;         /* x30 - t5     - temporary register 5                */
+    rt_ubase_t t6;         /* x31 - t6     - temporary register 6                */
+};
+
+/**
+ * This function will initialize thread stack
+ *
+ * @param tentry the entry of thread
+ * @param parameter the parameter of entry
+ * @param stack_addr the beginning stack address
+ * @param texit the function will be called when thread exit
+ *
+ * @return stack address
+ */
+rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
+                             rt_uint8_t *stack_addr, void *texit)
+{
+    struct stack_frame *stack_frame;
+    rt_uint8_t         *stk;
+    int                i;
+
+    stk  = stack_addr + sizeof(rt_uint32_t);
+    stk  = (rt_uint8_t *)RT_ALIGN_DOWN((rt_uint32_t)stk, 8);
+    stk -= sizeof(struct stack_frame);
+
+    stack_frame = (struct stack_frame *)stk;
+
+    for (i = 0; i < sizeof(struct stack_frame) / sizeof(rt_ubase_t); i++)
+    {
+        ((rt_ubase_t *)stack_frame)[i] = 0xdeadbeef;
+    }
+
+    stack_frame->ra      = (rt_ubase_t)texit;
+    stack_frame->a0      = (rt_ubase_t)parameter;
+    stack_frame->epc     = (rt_ubase_t)tentry;
+
+    // force to machine mode(MPP=11) and set MPIE to 1
+    stack_frame->mstatus = 0x00001880;
+
+    return stk;
+}