libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[add] fdcan driver.

This commit is contained in:
thread-liu 2020-12-04 17:57:39 +08:00
parent 10da8d4e44
commit 5d7efb3c5f
7 changed files with 426 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
bsp/stm32/libraries/STM32MPxx_HAL/SConscript
View File

@ -94,6 +94,9 @@ if GetDepend(['BSP_USING_LTDC']):
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_dma2d.c']
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dsi.c']
if GetDepend(['BSP_USING_FDCAN']):
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_fdcan.c']
path = [cwd + '/STM32MP1xx_HAL_Driver/Inc',
cwd + '/CMSIS/Device/ST/STM32MP1xx/Include',
cwd + '/CMSIS/Core/Include',

2
bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
View File

@ -42,7 +42,7 @@
/*#define HAL_DFSDM_MODULE_ENABLED */
/*#define HAL_DTS_MODULE_ENABLED */
/*#define HAL_ETH_MODULE_ENABLED */
/*#define HAL_FDCAN_MODULE_ENABLED */
#define HAL_FDCAN_MODULE_ENABLED
/*#define HAL_HASH_MODULE_ENABLED */
/*#define HAL_HCD_MODULE_ENABLED */
#define HAL_HSEM_MODULE_ENABLED

98
bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
View File

@ -1520,6 +1520,104 @@ void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
}
/**
* @brief FDCAN MSP Initialization
* This function configures the hardware resources used in this example
* @param hfdcan: FDCAN handle pointer
* @retval None
*/
void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef* hfdcan)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
if(hfdcan->Instance==FDCAN1)
{
/* USER CODE BEGIN FDCAN1_MspInit 0 */
/* USER CODE END FDCAN1_MspInit 0 */
if(IS_ENGINEERING_BOOT_MODE())
{
/** Initializes the peripherals clock
*/
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_FDCAN;
PeriphClkInit.FdcanClockSelection = RCC_FDCANCLKSOURCE_HSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/* Peripheral clock enable */
__HAL_RCC_FDCAN_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOI_CLK_ENABLE();
/**FDCAN1 GPIO Configuration
PH13 ------> FDCAN1_TX
PI9 ------> FDCAN1_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF9_FDCAN1;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF9_FDCAN1;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
/* FDCAN1 interrupt Init */
HAL_NVIC_SetPriority(FDCAN1_IT0_IRQn, 0x02, 0);
HAL_NVIC_EnableIRQ(FDCAN1_IT0_IRQn);
HAL_NVIC_SetPriority(FDCAN1_IT1_IRQn, 0x02, 0);
HAL_NVIC_EnableIRQ(FDCAN1_IT1_IRQn);
HAL_NVIC_SetPriority(FDCAN_CAL_IRQn, 0x02, 0);
HAL_NVIC_EnableIRQ(FDCAN_CAL_IRQn);
/* USER CODE BEGIN FDCAN1_MspInit 1 */
/* USER CODE END FDCAN1_MspInit 1 */
}
}
/**
* @brief FDCAN MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hfdcan: FDCAN handle pointer
* @retval None
*/
void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef* hfdcan)
{
if(hfdcan->Instance==FDCAN1)
{
/* USER CODE BEGIN FDCAN1_MspDeInit 0 */
/* USER CODE END FDCAN1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_FDCAN_CLK_DISABLE();
/**FDCAN1 GPIO Configuration
PH13 ------> FDCAN1_TX
PI9 ------> FDCAN1_RX
*/
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_13);
HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9);
/* FDCAN1 interrupt DeInit */
HAL_NVIC_DisableIRQ(FDCAN1_IT0_IRQn);
HAL_NVIC_DisableIRQ(FDCAN1_IT1_IRQn);
HAL_NVIC_DisableIRQ(FDCAN_CAL_IRQn);
/* USER CODE BEGIN FDCAN1_MspDeInit 1 */
/* USER CODE END FDCAN1_MspDeInit 1 */
}
}
/**
* @brief This function is executed in case of error occurrence.
* @retval None

9
bsp/stm32/stm32mp157a-st-ev1/board/Kconfig
View File

@ -252,6 +252,15 @@ menu "On-chip Peripheral Drivers"
default n
endif
menuconfig BSP_USING_FDCAN
bool "Enable FDCAN"
default n
if BSP_USING_FDCAN
config BSP_USING_FDCAN1
bool "Enable FDCAN1"
default n
endif
source "../libraries/HAL_Drivers/Kconfig"
endmenu

3
bsp/stm32/stm32mp157a-st-ev1/board/SConscript
View File

@ -40,6 +40,9 @@ if GetDepend(['BSP_USING_MFX']):
src += Glob('ports/drv_mfx.c')
src += Glob('ports/mfxstm32l152.c')
if GetDepend(['BSP_USING_FDCAN']):
src += Glob('ports/drv_fdcan.c')
if GetDepend(['BSP_USING_OPENAMP']):
src += Glob('CubeMX_Config/CM4/Src/ipcc.c')
src += Glob('CubeMX_Config/CM4/Src/openamp.c')

290
bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_fdcan.c Normal file
View File

@ -0,0 +1,290 @@
/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-07-06 thread-liu first version
*/
#include "board.h"
#if defined(BSP_USING_FDCAN1) || defined(BSP_USING_FDCAN2)
#include "drv_fdcan.h"
//#define DRV_DEBUG
#define LOG_TAG "drv.fdcan"
#include <drv_log.h>
struct stm32_fdcan
{
struct rt_device dev;
FDCAN_HandleTypeDef fdcan;
FDCAN_FilterTypeDef filter;
FDCAN_TxHeaderTypeDef tx_config;
FDCAN_RxHeaderTypeDef rx_config;
volatile rt_uint8_t fifo0;
volatile rt_uint8_t fifo1;
};
static struct stm32_fdcan rt_fdcan = {0};
static rt_err_t rt_fdcan_init(rt_device_t dev)
{
RT_ASSERT(dev != RT_NULL);
struct stm32_fdcan *device = (struct stm32_fdcan *)dev;
device->fdcan.Instance = FDCAN1;
device->fdcan.Init.FrameFormat = FDCAN_FRAME_CLASSIC;
device->fdcan.Init.Mode = FDCAN_MODE_INTERNAL_LOOPBACK;
device->fdcan.Init.AutoRetransmission = ENABLE;
device->fdcan.Init.TransmitPause = DISABLE;
device->fdcan.Init.ProtocolException = ENABLE;
device->fdcan.Init.NominalPrescaler = 0x01; /* tq = NominalPrescaler x (1/fdcan_ker_ck) */
device->fdcan.Init.NominalSyncJumpWidth = 0x08;
device->fdcan.Init.DataPrescaler = 0x01;
device->fdcan.Init.DataSyncJumpWidth = 0x04;
device->fdcan.Init.DataTimeSeg1 = 0x05; /* DataTimeSeg1 = Propagation_segment + Phase_segment_1 */
device->fdcan.Init.DataTimeSeg2 = 0x04;
device->fdcan.Init.NominalTimeSeg1 = 0x1F; /* NominalTimeSeg1 = Propagation_segment + Phase_segment_1 */
device->fdcan.Init.NominalTimeSeg2 = 0x08;
device->fdcan.Init.MessageRAMOffset = 0x00;
device->fdcan.Init.StdFiltersNbr = 0x01;
device->fdcan.Init.ExtFiltersNbr = 0x01;
device->fdcan.Init.RxFifo0ElmtsNbr = 0x01;
device->fdcan.Init.RxFifo0ElmtSize = FDCAN_DATA_BYTES_8;
device->fdcan.Init.RxFifo1ElmtsNbr = 0x02;
device->fdcan.Init.RxFifo1ElmtSize = FDCAN_DATA_BYTES_8;
device->fdcan.Init.RxBuffersNbr = 0x00;
device->fdcan.Init.TxEventsNbr = 0x00;
device->fdcan.Init.TxBuffersNbr = 0x00;
device->fdcan.Init.TxFifoQueueElmtsNbr = 0x01;
device->fdcan.Init.TxFifoQueueMode = FDCAN_TX_FIFO_OPERATION;
device->fdcan.Init.TxElmtSize = FDCAN_DATA_BYTES_8;
if (HAL_FDCAN_Init(&device->fdcan) != HAL_OK)
{
return RT_ERROR;
}
device->filter.IdType = FDCAN_EXTENDED_ID;
device->filter.FilterIndex = 0;
device->filter.FilterType = FDCAN_FILTER_MASK;
device->filter.FilterConfig = FDCAN_FILTER_TO_RXFIFO0;
device->filter.FilterID1 = 0x1111111;
device->filter.FilterID2 = 0x2222222;
if (HAL_FDCAN_ConfigFilter(&device->fdcan, &device->filter)!=HAL_OK)
{
return RT_ERROR;
}
HAL_FDCAN_Start(&device->fdcan);
HAL_FDCAN_ActivateNotification(&device->fdcan, FDCAN_IT_RX_FIFO0_NEW_MESSAGE, 0); /* open rx fifo0 new message it */
device->fifo0 = RESET;
device->fifo1 = RESET;
return RT_EOK;
}
static rt_err_t rt_fdcan_open(rt_device_t dev, rt_uint16_t oflag)
{
RT_ASSERT(dev != RT_NULL);
return RT_EOK;
}
static rt_err_t rt_fdcan_close(rt_device_t dev)
{
RT_ASSERT(dev != RT_NULL);
return RT_EOK;
}
static rt_err_t rt_fdcan_control(rt_device_t dev, int cmd, void *args)
{
RT_ASSERT(dev != RT_NULL);
struct stm32_fdcan *device = (struct stm32_fdcan *)dev;
switch (cmd)
{
case FDCAN_MODE_NORMAL:
device->fdcan.Init.Mode = FDCAN_MODE_NORMAL;
break;
case FDCAN_MODE_INTERNAL_LOOPBACK:
device->fdcan.Init.Mode = FDCAN_MODE_INTERNAL_LOOPBACK;
break;
default:
break;
}
HAL_FDCAN_Init(&device->fdcan);
return RT_EOK;
}
static rt_size_t rt_fdcan_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
RT_ASSERT(dev != RT_NULL);
struct stm32_fdcan *device = (struct stm32_fdcan *)dev;
if (rt_fdcan.fifo0 == SET)
{
rt_fdcan.fifo0 = RESET;
if (HAL_FDCAN_GetRxMessage(&device->fdcan, FDCAN_RX_FIFO0, &device->rx_config, (uint8_t *)buffer) != HAL_OK)
{
LOG_E("get msg error from fdcan fifo0!");
return 0;
}
return device->rx_config.DataLength >> 16;
}
if (rt_fdcan.fifo1 == SET)
{
rt_fdcan.fifo0 = RESET;
if (HAL_FDCAN_GetRxMessage(&device->fdcan, FDCAN_RX_FIFO1, &device->rx_config, (uint8_t *)buffer) != HAL_OK)
{
LOG_E("get msg error from fdcan fifo1!");
return 0;
}
return device->rx_config.DataLength >> 16;
}
return 0;
}
static rt_size_t rt_fdcan_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
RT_ASSERT(dev != RT_NULL);
struct stm32_fdcan *device = (struct stm32_fdcan *)dev;
device->tx_config.Identifier = 0x1111112;
device->tx_config.IdType = FDCAN_EXTENDED_ID;
device->tx_config.TxFrameType = FDCAN_DATA_FRAME;
device->tx_config.DataLength = FDCAN_DLC_BYTES_8;
device->tx_config.ErrorStateIndicator = FDCAN_ESI_ACTIVE;
device->tx_config.BitRateSwitch = FDCAN_BRS_OFF;
device->tx_config.FDFormat = FDCAN_CLASSIC_CAN;
device->tx_config.TxEventFifoControl = FDCAN_NO_TX_EVENTS;
device->tx_config.MessageMarker = 0xCC;
if (HAL_FDCAN_AddMessageToTxFifoQ(&device->fdcan, &device->tx_config, (uint8_t *)buffer) != HAL_OK)
{
return RT_ERROR;
}
return RT_EOK;
}
void FDCAN1_IT0_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_FDCAN_IRQHandler(&rt_fdcan.fdcan);
/* leave interrupt */
rt_interrupt_leave();
}
void FDCAN1_IT1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_FDCAN_IRQHandler(&rt_fdcan.fdcan);
/* leave interrupt */
rt_interrupt_leave();
}
void HAL_FDCAN_RxFifo0Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo0ITs)
{
if (hfdcan->Instance == FDCAN1)
{
if ((RxFifo0ITs & FDCAN_IT_RX_FIFO0_NEW_MESSAGE) != RESET)
{
rt_fdcan.fifo0 = SET;
HAL_FDCAN_ActivateNotification(hfdcan, FDCAN_IT_RX_FIFO0_NEW_MESSAGE, 0);
}
}
}
void HAL_FDCAN_RxFifo1Callback(FDCAN_HandleTypeDef *hfdcan, uint32_t RxFifo1ITs)
{
if ((RxFifo1ITs & FDCAN_IT_RX_FIFO1_NEW_MESSAGE) != RESET)
{
rt_fdcan.fifo1 = SET;
HAL_FDCAN_ActivateNotification(hfdcan, FDCAN_IT_RX_FIFO1_NEW_MESSAGE, 0);
}
}
int fdcan_init(void)
{
rt_fdcan.dev.type = RT_Device_Class_CAN;
rt_fdcan.dev.init = rt_fdcan_init;
rt_fdcan.dev.open = rt_fdcan_open;
rt_fdcan.dev.close = rt_fdcan_close;
rt_fdcan.dev.read = rt_fdcan_read;
rt_fdcan.dev.write = rt_fdcan_write;
rt_fdcan.dev.control = rt_fdcan_control;
rt_fdcan.dev.user_data = RT_NULL;
rt_device_register(&rt_fdcan.dev, "fdcan1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE);
LOG_I("fdcan1 init success!");
return RT_EOK;
}
INIT_DEVICE_EXPORT(fdcan_init);
#ifdef FINSH_USING_MSH
#include <finsh.h>
int fdcan_sample(int argc, char **argv)
{
rt_err_t result = RT_EOK;
rt_uint8_t i, rx_buf[8], tx_buf[8];
struct rt_device *dev = RT_NULL;
if (argc != 9)
{
rt_kprintf("Usage:\n");
rt_kprintf("fdcan_sample 1 2 3 4 5 6 7 8\n");
return -1;
}
for (i = 0; i < 8; i++)
{
tx_buf[i] = atoi(argv[i+1]);
}
dev = rt_device_find("fdcan1");
if (dev == RT_NULL)
{
rt_kprintf("can't find fdcan1 device!\n");
return RT_ERROR;
}
rt_device_open(dev, RT_DEVICE_OFLAG_RDWR);
rt_device_write(dev, 0, tx_buf, 8);
rt_thread_delay(1);
rt_device_read(dev, 0, rx_buf, 8);
rt_kprintf("fdcan1 loopback test over, rbuf = ");
for (i = 0; i < 8; i++)
{
rt_kprintf(" %x ", rx_buf[i]);
}
rt_kprintf("\n");
return result;
}
MSH_CMD_EXPORT(fdcan_sample, fdcan loopback mode test);
#endif
#endif

22
bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_fdcan.h Normal file
View File

@ -0,0 +1,22 @@
/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-07-06 thread-liu first version
*/
#ifndef __DRV_FDCAN_H__
#define __DRV_FDCAN_H__
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif