diff --git a/bsp/gd32/arm/docs/GD32_ARM系列驱动介绍.md b/bsp/gd32/arm/docs/GD32_ARM系列驱动介绍.md index 3a18296274..0a1c207f8a 100644 --- a/bsp/gd32/arm/docs/GD32_ARM系列驱动介绍.md +++ b/bsp/gd32/arm/docs/GD32_ARM系列驱动介绍.md @@ -30,17 +30,17 @@ | 序号 | 驱动 | 简介 | | ---- | ------------------------------------------------------------ | ------------------------------------------------ | -| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin.md) | 操作 GPIO 管脚 | +| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | | 2 | [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | -| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c.md) | 通过软件 I2C 收发数据 | +| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 收发数据 | | 4 | [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | -| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc.md) | 测量管脚上的模拟量 | +| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | | 6 | SDIO | 通过 SDIO 读写数据 | -| 7 | [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer.md) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| 8 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm.md) | 在特定的管脚输出 PWM 波形 | -| 9 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc.md) | 设置和读取时间 | -| 10 | [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog.md) | 看门狗驱动 | -| 11 | [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi.md) | 通过 SPI（1、2、4线） 收发数据 | +| 7 | [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| 8 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| 9 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| 10 | [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | +| 11 | [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi?id=配置-qspi-设备) | 通过 SPI（1、2、4线） 收发数据 | ### 2.2 板载外设 diff --git a/bsp/gd32/risc-v/docs/GD32_RISC-V系列驱动介绍.md b/bsp/gd32/risc-v/docs/GD32_RISC-V系列驱动介绍.md index 074e8b79a3..81cab075fa 100644 --- a/bsp/gd32/risc-v/docs/GD32_RISC-V系列驱动介绍.md +++ b/bsp/gd32/risc-v/docs/GD32_RISC-V系列驱动介绍.md @@ -30,15 +30,15 @@ | 序号 | 驱动 | 简介 | | ---- | ------------------------------------------------------------ | ------------------------------------------------ | -| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin.md) | 操作 GPIO 管脚 | +| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | | 2 | [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | -| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c.md) | 通过软件 I2C 收发数据 | +| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 收发数据 | | 4 | [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | -| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc.md) | 测量管脚上的模拟量 | -| 6 | [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer.md) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| 7 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm.md) | 在特定的管脚输出 PWM 波形 | -| 8 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc.md) | 设置和读取时间 | -| 9 | [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog.md) | 看门狗驱动 | +| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | +| 6 | [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| 7 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| 8 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| 9 | [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | ### 2.2 板载外设 diff --git a/bsp/imxrt/docs/IMXRT系列驱动介绍.md b/bsp/imxrt/docs/IMXRT系列驱动介绍.md index 8a4c8e706b..dff7bdd8e6 100644 --- a/bsp/imxrt/docs/IMXRT系列驱动介绍.md +++ b/bsp/imxrt/docs/IMXRT系列驱动介绍.md @@ -30,15 +30,15 @@ | 序号 | 驱动 | 简介 | | ---- | ------------------------------------------------------------ | ------------------------------------------------ | -| 1 | [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | 操作 GPIO 管脚 | -| 2 | [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | 通过串口收发数据 | -| 3 | [soft I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | 通过软件 I2C 或者硬件 I2C 收发数据 | -| 4 | [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | 通过 SPI 收发数据 | -| 5 | [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | 测量管脚上的模拟量 | -| 6 | [HWTIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| 7 | [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | 在特定的管脚输出 PWM 波形 | -| 8 | [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | 设置和读取时间 | -| 9 | [WATCHDOG](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | 看门狗驱动 | +| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | +| 2 | [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | +| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 或者硬件 I2C 收发数据 | +| 4 | [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | +| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | +| 6 | [HWTIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| 7 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| 8 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| 9 | [WATCHDOG](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | ### 2.2 板载外设 diff --git a/bsp/lpc55sxx/docs/LPC55Sxx系列驱动介绍.md b/bsp/lpc55sxx/docs/LPC55Sxx系列驱动介绍.md index 173be32472..a0bcb6b1d0 100644 --- a/bsp/lpc55sxx/docs/LPC55Sxx系列驱动介绍.md +++ b/bsp/lpc55sxx/docs/LPC55Sxx系列驱动介绍.md @@ -30,15 +30,15 @@ | 序号 | 驱动 | 简介 | | ---- | ------------------------------------------------------------ | ------------------------------------------------ | -| 1 | [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | 操作 GPIO 管脚 | -| 2 | [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | 通过串口收发数据 | -| 3 | [soft I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | 通过软件 I2C 或者硬件 I2C 收发数据 | -| 4 | [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | 通过 SPI 收发数据 | -| 5 | [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | 测量管脚上的模拟量 | -| 6 | [HWTIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| 7 | [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | 在特定的管脚输出 PWM 波形 | -| 8 | [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | 设置和读取时间 | -| 9 | [WATCHDOG](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | 看门狗驱动 | +| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | +| 2 | [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | +| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 或者硬件 I2C 收发数据 | +| 4 | [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | +| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | +| 6 | [HWTIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| 7 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| 8 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| 9 | [WATCHDOG](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | ### 2.2 板载外设 diff --git a/bsp/renesas/docs/Introduction_to_RA_Series_Drives.md b/bsp/renesas/docs/Introduction_to_RA_Series_Drives.md index 9f30a2c25e..c35946ddd9 100644 --- a/bsp/renesas/docs/Introduction_to_RA_Series_Drives.md +++ b/bsp/renesas/docs/Introduction_to_RA_Series_Drives.md @@ -30,17 +30,17 @@ The driver libraries currently provided by RT-Thread already support multiple se | Driver | Introduction | | ------------------------------------------------------------ | ------------------------------------------------ | -| [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | Operate the GPIO pins | -| [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | Send and receive data through serial ports | -| [I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | Send and receive data via software I2C | -| [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | Send and receive data over SPI | -| [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | Measure the analog data on the pin | +| [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | Operate the GPIO pins | +| [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | Send and receive data through serial ports | +| [I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | Send and receive data via software I2C | +| [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | Send and receive data over SPI | +| [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | Measure the analog data on the pin | | SDIO | Read and write data through SDIO | -| [TIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | Use hardware timers to implement the function of measuring time and timing execution callback functions | -| [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | Outputs a PWM waveform at a specific pin | -| [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | Set and read times | -| [WDT](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | Watchdog driver | -| [QSPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/#qspi_1) | Send and receive data via SPI (1, 2, 4-wire). | +| [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | Use hardware timers to implement the function of measuring time and timing execution callback functions | +| [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | Outputs a PWM waveform at a specific pin | +| [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | Set and read times | +| [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | Watchdog driver | +| [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi?id=配置-qspi-设备) | Send and receive data via SPI (1, 2, 4-wire). | ### 2.2 On-board peripherals diff --git a/bsp/renesas/docs/RA系列驱动介绍.md b/bsp/renesas/docs/RA系列驱动介绍.md index b125bf0c94..5c1b7c4d3b 100644 --- a/bsp/renesas/docs/RA系列驱动介绍.md +++ b/bsp/renesas/docs/RA系列驱动介绍.md @@ -30,17 +30,17 @@ | 驱动 | 简介 | | ------------------------------------------------------------ | ------------------------------------------------ | -| [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | 操作 GPIO 管脚 | -| [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | 通过串口收发数据 | -| [I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | 通过软件 I2C 收发数据 | -| [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | 通过 SPI 收发数据 | -| [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | 测量管脚上的模拟量 | +| [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | +| [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | +| [I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 收发数据 | +| [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | +| [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | | SDIO | 通过 SDIO 读写数据 | -| [TIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | 在特定的管脚输出 PWM 波形 | -| [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | 设置和读取时间 | -| [WDT](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | 看门狗驱动 | -| [QSPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/#qspi_1) | 通过 SPI（1、2、4线） 收发数据 | +| [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | +| [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi?id=配置-qspi-设备) | 通过 SPI（1、2、4线） 收发数据 | ### 2.2 板载外设 diff --git a/bsp/stm32/docs/STM32系列驱动介绍.md b/bsp/stm32/docs/STM32系列驱动介绍.md index 45c9ec391f..4726ddf421 100644 --- a/bsp/stm32/docs/STM32系列驱动介绍.md +++ b/bsp/stm32/docs/STM32系列驱动介绍.md @@ -30,17 +30,17 @@ | 序号 | 驱动 | 简介 | | ---- | ------------------------------------------------------------ | ------------------------------------------------ | -| 1 | [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | 操作 GPIO 管脚 | -| 2 | [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | 通过串口收发数据 | -| 3 | [soft I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | 通过软件 I2C 收发数据 | -| 4 | [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | 通过 SPI 收发数据 | -| 5 | [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | 测量管脚上的模拟量 | +| 1 | [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | 操作 GPIO 管脚 | +| 2 | [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | 通过串口收发数据 | +| 3 | [soft I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | 通过软件 I2C 收发数据 | +| 4 | [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | 通过 SPI 收发数据 | +| 5 | [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | 测量管脚上的模拟量 | | 6 | SDIO | 通过 SDIO 读写数据 | -| 7 | [TIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | -| 8 | [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | 在特定的管脚输出 PWM 波形 | -| 9 | [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | 设置和读取时间 | -| 10 | [WDT](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | 看门狗驱动 | -| 11 | [QSPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/#qspi_1) | 通过 SPI（1、2、4线） 收发数据 | +| 7 | [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | 使用硬件定时器实现测量时间和定时执行回调函数功能 | +| 8 | [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | 在特定的管脚输出 PWM 波形 | +| 9 | [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | 设置和读取时间 | +| 10 | [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | 看门狗驱动 | +| 11 | [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi?id=配置-qspi-设备) | 通过 SPI（1、2、4线） 收发数据 | ### 2.2 板载外设