libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[bsp][stm32] update f7 series bsp

This commit is contained in:
SummerGift 2018-12-26 10:41:18 +08:00
parent b92f45f85d
commit 5321d2fb7e
10 changed files with 2326 additions and 2632 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
bsp/stm32/stm32f767-fire-challenger/README.md
View File

@ -44,7 +44,7 @@
| QSPI Flash | 支持 | |
| 电位器 | 支持 | 使用 ADC1 |
| 以太网 | 暂不支持 | 移植中 |
| MPU6050六轴传感器 | 支持 | |
| MPU6050六轴传感器 | 支持 | |
| SDRAM | 支持 | |
| SD卡 | 即将支持 | |
| CAN | 即将支持 | |
@ -58,7 +58,7 @@
| RTC | 支持 | |
| WDT | 支持 | |
| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) |
| SDIO | 支持 | |
| SDIO | 暂不支持 | 即将支持 |
| PWM | 暂不支持 | 即将支持 |
| USB Device | 暂不支持 | 即将支持 |
| USB Host | 暂不支持 | 即将支持 |

11
bsp/stm32/stm32f767-fire-challenger/applications/main.c
View File

@ -11,14 +11,23 @@
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#include "drv_gpio.h"
/* defined the LED0 pin: PH10 */
#define LED0_PIN GET_PIN(H, 10)
int main(void)
{
int count = 1;
/* set LED0 pin mode to output */
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
while (count++)
{
rt_pin_write(LED0_PIN, !rt_pin_read(LED0_PIN));
rt_pin_write(LED0_PIN, PIN_HIGH);
rt_thread_mdelay(500);
rt_pin_write(LED0_PIN, PIN_LOW);
rt_thread_mdelay(500);
}
return RT_EOK;
}

133
bsp/stm32/stm32f767-fire-challenger/board/Kconfig
View File

@ -34,40 +34,6 @@ menu "Onboard Peripheral Drivers"
select PKG_USING_MPU6XXX
default n
config BSP_USING_ETH
bool "Enable Ethernet"
default n
select RT_USING_LWIP
if BSP_USING_ETH
config EXTERNAL_PHY_ADDRESS
hex
default 0x00
endif
config BSP_USING_RGB
bool "Enable RGB LED (timer5 channel1 - 3)"
select RT_USING_PWM
select BSP_USING_PWM
select BSP_USING_PWM5
select BSP_USING_PWM5_CH1
select BSP_USING_PWM5_CH2
select BSP_USING_PWM5_CH3
default n
config BSP_USING_POT
bool "Enable potentiometer"
select BSP_USING_ADC
select BSP_USING_ADC1
default n
config BSP_USING_SDCARD
bool "Enable SDCARD (sdio)"
select BSP_USING_SDIO
select RT_USING_DFS
select RT_USING_DFS_ELMFAT
select RT_USING_PIN
default n
endmenu
menu "On-chip Peripheral Drivers"
@ -92,10 +58,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_SERIAL
default n
config BSP_UART_USING_DMA_RX
bool "Enable UART RX DMA support"
default n
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
@ -124,47 +86,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_QSPI
select RT_USING_SPI
default n
menuconfig BSP_USING_TIM
bool "Enable timer"
default n
select RT_USING_HWTIMER
if BSP_USING_TIM
config BSP_USING_TIM11
bool "Enable TIM11"
default n
config BSP_USING_TIM13
bool "Enable TIM13"
default n
config BSP_USING_TIM14
bool "Enable TIM14"
default n
endif
menuconfig BSP_USING_PWM
bool "Enable pwm"
default n
select RT_USING_PWM
if BSP_USING_PWM
menuconfig BSP_USING_PWM5
bool "Enable timer5 output pwm"
default n
if BSP_USING_PWM5
config BSP_USING_PWM5_CH1
bool "Enable PWM5 channel1"
default n
config BSP_USING_PWM5_CH2
bool "Enable PWM5 channel2"
default n
config BSP_USING_PWM5_CH3
bool "Enable PWM5 channel3"
default n
endif
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
@ -174,14 +95,24 @@ menu "On-chip Peripheral Drivers"
config BSP_USING_ADC1
bool "Enable ADC1"
default n
endif
config BSP_USING_ADC2
bool "Enable ADC2"
default n
config BSP_USING_ADC3
bool "Enable ADC3"
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
comment "Notice: PB6 --> 22; PB7 --> 23"
config BSP_I2C1_SCL_PIN
int "I2C1 scl pin number"
range 1 176
default 22
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 176
default 23
endif
menuconfig BSP_USING_I2C2
@ -191,15 +122,33 @@ menu "On-chip Peripheral Drivers"
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C2
comment "Notice: PH4 --> 116; PH5 --> 117"
comment "Notice: PC15 --> 47; PD0 --> 48"
config BSP_I2C2_SCL_PIN
int "i2c2 scl pin number"
range 1 176
default 116
default 47
config BSP_I2C2_SDA_PIN
int "I2C2 sda pin number"
range 1 176
default 117
default 48
endif
menuconfig BSP_USING_I2C3
bool "Enable I2C3 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C3
comment "Notice: PF12 --> 92; PF13 --> 93"
config BSP_I2C3_SCL_PIN
int "i2c3 scl pin number"
range 1 176
default 92
config BSP_I2C3_SDA_PIN
int "I2C3 sda pin number"
range 1 176
default 93
endif
menuconfig BSP_USING_I2C4
@ -231,12 +180,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_WDT
default n
config BSP_USING_SDIO
bool "Enable SDIO"
select RT_USING_SDIO
select RT_USING_DFS
default n
endmenu
menu "Board extended module Drivers"

3
bsp/stm32/stm32f767-fire-challenger/board/SConscript
View File

@ -18,9 +18,6 @@ if GetDepend(['BSP_USING_ETH']):
if GetDepend(['BSP_USING_QSPI_FLASH']):
src += Glob('ports/drv_qspi_flash.c')
if GetDepend(['BSP_USING_SDCARD']):
src += Glob('ports/sdcard_port.c')
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports']

24
bsp/stm32/stm32f767-fire-challenger/board/board.c
View File

@ -60,27 +60,3 @@ void SystemClock_Config(void)
Error_Handler();
}
}
void MX_GPIO_Init(void)
{
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
}
#ifdef RT_USING_PIN
int board_pin_init(void)
{
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
return 0;
}
INIT_BOARD_EXPORT(board_pin_init);
#endif /* RT_USING_PIN */

10
bsp/stm32/stm32f767-fire-challenger/board/board.h
View File

@ -15,10 +15,6 @@
#include <stm32f7xx.h>
#include "drv_common.h"
#ifdef BSP_USING_GPIO
#include "drv_gpio.h"
#endif
#define STM32_SRAM_SIZE (512)
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
@ -39,13 +35,7 @@ extern int __bss_end;
#define HEAP_END STM32_SRAM_END
/* Board Pin definitions */
#define LED0_PIN GET_PIN(H, 10)
#define LED1_PIN GET_PIN(H, 11)
#define LED2_PIN GET_PIN(H, 12)
void SystemClock_Config(void);
void MX_GPIO_Init(void);
#endif

76
bsp/stm32/stm32f767-fire-challenger/board/ports/sdcard_port.c
View File

@ -1,76 +0,0 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-13 balanceTWK add sdcard port file
*/
#include <rtthread.h>
#ifdef BSP_USING_SDCARD
#include <dfs_elm.h>
#include <dfs_fs.h>
#include <dfs_posix.h>
#include "drv_gpio.h"
#define DBG_ENABLE
#define DBG_SECTION_NAME "app.card"
#define DBG_COLOR
#define DBG_LEVEL DBG_INFO
#include <rtdbg.h>
#define WIFI_RESET_PIN GET_PIN(G, 9)
int ewm1062_disable(void)
{
rt_pin_mode(WIFI_RESET_PIN, PIN_MODE_OUTPUT);
rt_pin_write(WIFI_RESET_PIN,PIN_LOW);
return RT_EOK;
}
INIT_BOARD_EXPORT(ewm1062_disable);
void sd_mount(void *parameter)
{
while (1)
{
rt_thread_mdelay(500);
if(rt_device_find("sd0") != RT_NULL)
{
if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
{
LOG_I("sd card mount to '/'");
break;
}
else
{
LOG_W("sd card mount to '/' failed!");
}
}
}
}
int stm32_sdcard_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
1024, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
}
return RT_EOK;
}
INIT_APP_EXPORT(stm32_sdcard_mount);
#endif /* BSP_USING_SDCARD */

4676
bsp/stm32/stm32f767-fire-challenger/project.ewp
View File

File diff suppressed because it is too large Load Diff

20
bsp/stm32/stm32f767-fire-challenger/project.eww
View File

@ -1,10 +1,10 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\project.ewp</path>
</project>
<batchBuild/>
</workspace>
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\project.ewp</path>
</project>
<batchBuild/>
</workspace>

1
bsp/stm32/stm32f767-fire-challenger/rtconfig.py
View File

@ -36,6 +36,7 @@ if PLATFORM == 'gcc':
CC = PREFIX + 'gcc'
AS = PREFIX + 'gcc'
AR = PREFIX + 'ar'
CXX = PREFIX + 'g++'
LINK = PREFIX + 'gcc'
TARGET_EXT = 'elf'
SIZE = PREFIX + 'size'