diff --git a/bsp/stm32/stm32l476-st-nucleo/README.md b/bsp/stm32/stm32l476-st-nucleo/README.md
index cd8ad13f9c..e1784c3855 100644
--- a/bsp/stm32/stm32l476-st-nucleo/README.md
+++ b/bsp/stm32/stm32l476-st-nucleo/README.md
@@ -43,6 +43,9 @@
| UART | 支持 | UART2 |
| IIC | 支持 | 软件模拟 |
| RTC | 支持 | 支持外部晶振和内部低速时钟 |
+| SPI | 支持 | SPI1/2/3 |
+| ADC | 支持 | ADC1_IN1/ADC2_IN2/ADC3_IN3 |
+| TIME | 支持 | TIME15/16/17 |
| **扩展模块** | **支持情况** | **备注** |
## 使用说明
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject
index ef81df8fbd..838bcf2aa4 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject
@@ -1,13 +1,14 @@
[PreviousGenFiles]
-HeaderPath=D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc
+HeaderPath=G:/1 Code/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc
HeaderFiles=stm32l4xx_it.h;stm32l4xx_hal_conf.h;main.h;
-SourcePath=D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src
+SourcePath=G:/1 Code/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src
SourceFiles=stm32l4xx_it.c;stm32l4xx_hal_msp.c;main.c;
[PreviousLibFiles]
-LibFiles=Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l476xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
+LibFiles=Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l476xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
[PreviousUsedKeilFiles]
-SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;../\Src/system_stm32l4xx.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;../\Src/system_stm32l4xx.c;../Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config//MDK-ARM/startup_stm32l476xx.s;
-HeaderPath=..\Drivers\STM32L4xx_HAL_Driver\Inc;..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32L4xx\Include;..\Drivers\CMSIS\Include;..\Inc;
+SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;;
+HeaderPath=F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Device\ST\STM32L4xx\Include;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Include;..\Inc;
+CDefines=USE_HAL_DRIVER;STM32L476xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 243a1fafd1..7d78ad4047 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -1,146 +1,234 @@
#MicroXplorer Configuration settings - do not modify
-File.Version=6
-KeepUserPlacement=false
Mcu.Family=STM32L4
-Mcu.IP0=NVIC
-Mcu.IP1=RCC
-Mcu.IP2=RTC
-Mcu.IP3=SYS
-Mcu.IP4=USART2
-Mcu.IPNb=5
-Mcu.Name=STM32L476R(C-E-G)Tx
-Mcu.Package=LQFP64
+PC3.Mode=Full_Duplex_Master
+ProjectManager.MainLocation=Src
+PA6.Mode=Full_Duplex_Master
+RCC.USART1Freq_Value=80000000
+RCC.SAI1Freq_Value=18285714.285714287
+USART2.IPParameters=VirtualMode-Asynchronous
+RCC.CortexFreq_Value=80000000
+SPI3.Direction=SPI_DIRECTION_2LINES
+VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
+SPI3.VirtualType=VM_MASTER
+ProjectManager.KeepUserCode=true
+Mcu.UserName=STM32L476RGTx
+SPI1.VirtualType=VM_MASTER
+SPI2.VirtualType=VM_MASTER
+PB10.Mode=Full_Duplex_Master
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_2
+SH.ADCx_IN2.0=ADC2_IN2,IN2-Single-Ended
+PC10.Signal=SPI3_SCK
+PC12.Signal=SPI3_MOSI
+RCC.PLLSAI1RoutputFreq_Value=64000000
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_SPI2_Init-SPI2-false-HAL-true,7-MX_SPI3_Init-SPI3-false-HAL-true,8-MX_TIM15_Init-TIM15-false-HAL-true,9-MX_TIM16_Init-TIM16-false-HAL-true,10-MX_TIM17_Init-TIM17-false-HAL-true,11-MX_ADC1_Init-ADC1-false-HAL-true,12-MX_ADC2_Init-ADC2-false-HAL-true,13-MX_ADC3_Init-ADC3-false-HAL-true,14-MX_LPTIM1_Init-LPTIM1-false-HAL-true
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+RCC.RTCFreq_Value=32768
+RCC.USART2Freq_Value=80000000
+PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
+ADC3.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
+PinOutPanel.RotationAngle=0
+RCC.MCO1PinFreq_Value=80000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+ProjectManager.StackSize=0x400
+PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
+PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
+RCC.I2C3Freq_Value=80000000
+RCC.LPTIM1Freq_Value=80000000
+Mcu.IP4=NVIC
+Mcu.IP5=RCC
+RCC.FCLKCortexFreq_Value=80000000
+Mcu.IP2=ADC3
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.IP3=LPTIM1
+Mcu.IP0=ADC1
+Mcu.IP1=ADC2
+Mcu.UserConstants=
+RCC.VCOSAI1OutputFreq_Value=128000000
+RCC.SDMMCFreq_Value=64000000
+Mcu.ThirdPartyNb=0
+SPI1.Direction=SPI_DIRECTION_2LINES
+RCC.HCLKFreq_Value=80000000
+SH.ADCx_IN3.0=ADC3_IN3,IN3-Single-Ended
+Mcu.IPNb=15
+ProjectManager.PreviousToolchain=
+RCC.APB2TimFreq_Value=80000000
+SPI1.CalculateBaudRate=40.0 MBits/s
+SH.ADCx_IN3.ConfNb=1
+PC3.Signal=SPI2_MOSI
+Mcu.Pin6=PA2
+RCC.SAI2Freq_Value=18285714.285714287
+Mcu.Pin7=PA3
+Mcu.Pin8=PA5
+Mcu.Pin9=PA6
+RCC.AHBFreq_Value=80000000
Mcu.Pin0=PC14-OSC32_IN (PC14)
Mcu.Pin1=PC15-OSC32_OUT (PC15)
-Mcu.Pin2=PA2
-Mcu.Pin3=PA3
-Mcu.Pin4=PA13 (JTMS-SWDIO)
-Mcu.Pin5=PA14 (JTCK-SWCLK)
-Mcu.Pin6=VP_RTC_VS_RTC_Activate
-Mcu.Pin7=VP_SYS_VS_Systick
-Mcu.PinsNb=8
-Mcu.ThirdPartyNb=0
-Mcu.UserConstants=
-Mcu.UserName=STM32L476RGTx
-MxCube.Version=5.0.1
-MxDb.Version=DB.5.0.1
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
-PA13\ (JTMS-SWDIO).Mode=Serial_Wire
-PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
-PA14\ (JTCK-SWCLK).Mode=Serial_Wire
-PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-PA2.Mode=Asynchronous
-PA2.Signal=USART2_TX
-PA3.Mode=Asynchronous
-PA3.Signal=USART2_RX
-PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
-PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
-PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
-PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
-PCC.Checker=true
-PCC.Line=STM32L4x6
-PCC.MCU=STM32L476R(C-E-G)Tx
-PCC.PartNumber=STM32L476RGTx
-PCC.Seq0=0
-PCC.Series=STM32L4
-PCC.Temperature=25
-PCC.Vdd=null
-PinOutPanel.RotationAngle=0
-ProjectManager.AskForMigrate=true
-ProjectManager.BackupPrevious=false
-ProjectManager.CompilerOptimize=6
-ProjectManager.ComputerToolchain=false
-ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=
-ProjectManager.DefaultFWLocation=true
-ProjectManager.DeletePrevious=true
-ProjectManager.DeviceId=STM32L476RGTx
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.13.0
-ProjectManager.FreePins=false
-ProjectManager.HalAssertFull=false
-ProjectManager.HeapSize=0x200
-ProjectManager.KeepUserCode=true
-ProjectManager.LastFirmware=true
-ProjectManager.LibraryCopy=0
-ProjectManager.MainLocation=Src
-ProjectManager.NoMain=false
-ProjectManager.PreviousToolchain=
-ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=CubeMX_Config.ioc
-ProjectManager.ProjectName=CubeMX_Config
-ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=MDK-ARM V5
-ProjectManager.ToolChainLocation=
-ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true
-RCC.ADCFreq_Value=64000000
-RCC.AHBFreq_Value=80000000
-RCC.APB1Freq_Value=80000000
-RCC.APB1TimFreq_Value=80000000
-RCC.APB2Freq_Value=80000000
-RCC.APB2TimFreq_Value=80000000
-RCC.CortexFreq_Value=80000000
-RCC.DFSDMFreq_Value=80000000
-RCC.FCLKCortexFreq_Value=80000000
-RCC.FamilyName=M
-RCC.HCLKFreq_Value=80000000
-RCC.HSE_VALUE=8000000
-RCC.HSI_VALUE=16000000
-RCC.I2C1Freq_Value=80000000
-RCC.I2C2Freq_Value=80000000
-RCC.I2C3Freq_Value=80000000
-RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
-RCC.LCDFreq_Value=32768
-RCC.LPTIM1Freq_Value=80000000
-RCC.LPTIM2Freq_Value=80000000
-RCC.LPUART1Freq_Value=80000000
-RCC.LSCOPinFreq_Value=32000
-RCC.LSI_VALUE=32000
-RCC.MCO1PinFreq_Value=80000000
-RCC.MSI_VALUE=4000000
-RCC.PLLN=10
-RCC.PLLPoutputFreq_Value=22857142.85714286
-RCC.PLLQoutputFreq_Value=80000000
-RCC.PLLRCLKFreq_Value=80000000
-RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
-RCC.PLLSAI1QoutputFreq_Value=64000000
-RCC.PLLSAI1RoutputFreq_Value=64000000
-RCC.PLLSAI2PoutputFreq_Value=18285714.285714287
-RCC.PLLSAI2RoutputFreq_Value=64000000
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
-RCC.PWRFreq_Value=80000000
-RCC.RNGFreq_Value=64000000
-RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
-RCC.RTCFreq_Value=32768
-RCC.SAI1Freq_Value=18285714.285714287
-RCC.SAI2Freq_Value=18285714.285714287
-RCC.SDMMCFreq_Value=64000000
-RCC.SWPMI1Freq_Value=80000000
-RCC.SYSCLKFreq_VALUE=80000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-RCC.UART4Freq_Value=80000000
-RCC.UART5Freq_Value=80000000
-RCC.USART1Freq_Value=80000000
-RCC.USART2Freq_Value=80000000
+Mcu.Pin2=PC0
+Mcu.Pin3=PC1
RCC.USART3Freq_Value=80000000
-RCC.USBFreq_Value=64000000
-RCC.VCOInputFreq_Value=16000000
-RCC.VCOOutputFreq_Value=160000000
-RCC.VCOSAI1OutputFreq_Value=128000000
-RCC.VCOSAI2OutputFreq_Value=128000000
-USART2.IPParameters=VirtualMode-Asynchronous
+Mcu.Pin4=PC2
+Mcu.Pin5=PC3
+ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
+ProjectManager.ProjectBuild=false
+RCC.HSE_VALUE=8000000
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.IP10=SYS
USART2.VirtualMode-Asynchronous=VM_ASYNC
-VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
-VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
-VP_SYS_VS_Systick.Mode=SysTick
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
+Mcu.IP12=TIM16
+Mcu.IP11=TIM15
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
+MxDb.Version=DB.5.0.60
+Mcu.IP14=USART2
+Mcu.IP13=TIM17
+ProjectManager.BackupPrevious=false
+RCC.VCOInputFreq_Value=16000000
+SH.ADCx_IN1.ConfNb=1
+PB14.Mode=Full_Duplex_Master
+File.Version=6
+SPI2.CalculateBaudRate=40.0 MBits/s
+ADC3.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag
+RCC.PLLRCLKFreq_Value=80000000
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
+ProjectManager.HalAssertFull=false
+ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
+ProjectManager.ProjectName=CubeMX_Config
+Mcu.Package=LQFP64
+PA6.Signal=SPI1_MISO
+SPI2.Mode=SPI_MODE_MASTER
+SPI3.Mode=SPI_MODE_MASTER
+ProjectManager.ToolChainLocation=
+RCC.LSI_VALUE=32000
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+ADC3.Rank-0\#ChannelRegularConversion=1
+RCC.LSCOPinFreq_Value=32000
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
+RCC.DFSDMFreq_Value=80000000
+PC11.Mode=Full_Duplex_Master
+ADC3.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+SH.ADCx_IN1.0=ADC1_IN1,IN1-Single-Ended
+RCC.PLLPoutputFreq_Value=22857142.85714286
+RCC.APB1TimFreq_Value=80000000
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+RCC.LPUART1Freq_Value=80000000
+SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+SPI2.Direction=SPI_DIRECTION_2LINES
+ADC2.Rank-0\#ChannelRegularConversion=1
+PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
+ProjectManager.CustomerFirmwarePackage=
+PA3.Signal=USART2_RX
+PA5.Mode=Full_Duplex_Master
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
+RCC.MSI_VALUE=4000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
+PA14\ (JTCK-SWCLK).Mode=Serial_Wire
+RCC.PLLQoutputFreq_Value=80000000
+ProjectManager.ProjectFileName=CubeMX_Config.ioc
+ADC1.Rank-0\#ChannelRegularConversion=1
+PA7.Mode=Full_Duplex_Master
+Mcu.PinsNb=24
+ProjectManager.NoMain=false
+SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,master
+ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+PC11.Signal=SPI3_MISO
+RCC.SWPMI1Freq_Value=80000000
+PC2.Signal=ADCx_IN3
+PC10.Mode=Full_Duplex_Master
+ProjectManager.DefaultFWLocation=true
+PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
+VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
+ProjectManager.DeletePrevious=true
+PC0.Signal=ADCx_IN1
+RCC.VCOSAI2OutputFreq_Value=128000000
+VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
+RCC.FamilyName=M
+PA3.Mode=Asynchronous
+ADC3.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
+ProjectManager.TargetToolchain=MDK-ARM V5
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag
+SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+RCC.USBFreq_Value=64000000
+RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
+PB10.Signal=SPI2_SCK
+PB14.Signal=SPI2_MISO
+RCC.PLLSAI2RoutputFreq_Value=64000000
+PA5.Signal=SPI1_SCK
+ADC2.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+PC12.Mode=Full_Duplex_Master
board=custom
+RCC.VCOOutputFreq_Value=160000000
+ProjectManager.LastFirmware=true
+RCC.APB2Freq_Value=80000000
+RCC.UART4Freq_Value=80000000
+SPI3.CalculateBaudRate=40.0 MBits/s
+MxCube.Version=5.6.1
+RCC.I2C1Freq_Value=80000000
+SPI1.Mode=SPI_MODE_MASTER
+RCC.LCDFreq_Value=32768
+RCC.RNGFreq_Value=64000000
+SH.ADCx_IN2.ConfNb=1
+RCC.PLLSAI1QoutputFreq_Value=64000000
+RCC.ADCFreq_Value=64000000
+VP_SYS_VS_Systick.Mode=SysTick
+VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+RCC.UART5Freq_Value=80000000
+ProjectManager.FreePins=false
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+ProjectManager.AskForMigrate=true
+Mcu.Name=STM32L476R(C-E-G)Tx
+RCC.LPTIM2Freq_Value=80000000
+PA2.Signal=USART2_TX
+ProjectManager.UnderRoot=false
+Mcu.IP8=SPI2
+Mcu.IP9=SPI3
+Mcu.IP6=RTC
+Mcu.IP7=SPI1
+ProjectManager.CoupleFile=false
+PA13\ (JTMS-SWDIO).Mode=Serial_Wire
+RCC.SYSCLKFreq_VALUE=80000000
+Mcu.Pin22=VP_TIM16_VS_ClockSourceINT
+Mcu.Pin23=VP_TIM17_VS_ClockSourceINT
+Mcu.Pin20=VP_SYS_VS_Systick
+ADC1.master=1
+Mcu.Pin21=VP_TIM15_VS_ClockSourceINT
+ADC2.NbrOfConversionFlag=1
+RCC.PLLSAI2PoutputFreq_Value=18285714.285714287
+NVIC.ForceEnableDMAVector=true
+KeepUserPlacement=false
+PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+ProjectManager.CompilerOptimize=6
+VP_TIM15_VS_ClockSourceINT.Mode=Internal
+ProjectManager.HeapSize=0x200
+Mcu.Pin15=PC10
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.Pin16=PC11
+Mcu.Pin13=PA13 (JTMS-SWDIO)
+Mcu.Pin14=PA14 (JTCK-SWCLK)
+Mcu.Pin19=VP_RTC_VS_RTC_Activate
+ProjectManager.ComputerToolchain=false
+Mcu.Pin17=PC12
+RCC.HSI_VALUE=16000000
+Mcu.Pin18=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+ADC1.NbrOfConversionFlag=1
+Mcu.Pin11=PB10
+Mcu.Pin12=PB14
+RCC.PLLN=10
+Mcu.Pin10=PA7
+PA2.Mode=Asynchronous
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
+RCC.PWRFreq_Value=80000000
+RCC.I2C2Freq_Value=80000000
+RCC.APB1Freq_Value=80000000
+ADC3.NbrOfConversionFlag=1
+ProjectManager.DeviceId=STM32L476RGTx
+PC1.Signal=ADCx_IN2
+ProjectManager.LibraryCopy=2
+PA7.Signal=SPI1_MOSI
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h
index 9cf0bbaca2..04047367e9 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h
@@ -5,7 +5,7 @@
******************************************************************************
* @attention
*
- * © COPYRIGHT(c) 2019 STMicroelectronics
+ * © COPYRIGHT(c) 2020 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -49,7 +49,7 @@
*/
#define HAL_MODULE_ENABLED
-/*#define HAL_ADC_MODULE_ENABLED */
+#define HAL_ADC_MODULE_ENABLED
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_CAN_MODULE_ENABLED */
/*#define HAL_COMP_MODULE_ENABLED */
@@ -70,12 +70,14 @@
/*#define HAL_LTDC_MODULE_ENABLED */
/*#define HAL_LCD_MODULE_ENABLED */
#define HAL_LPTIM_MODULE_ENABLED
+/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_OPAMP_MODULE_ENABLED */
/*#define HAL_OSPI_MODULE_ENABLED */
/*#define HAL_OSPI_MODULE_ENABLED */
/*#define HAL_PCD_MODULE_ENABLED */
+/*#define HAL_PKA_MODULE_ENABLED */
/*#define HAL_QSPI_MODULE_ENABLED */
/*#define HAL_QSPI_MODULE_ENABLED */
/*#define HAL_RNG_MODULE_ENABLED */
@@ -84,16 +86,18 @@
/*#define HAL_SD_MODULE_ENABLED */
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
-/*#define HAL_SPI_MODULE_ENABLED */
+#define HAL_SPI_MODULE_ENABLED
/*#define HAL_SRAM_MODULE_ENABLED */
/*#define HAL_SWPMI_MODULE_ENABLED */
-/*#define HAL_TIM_MODULE_ENABLED */
+#define HAL_TIM_MODULE_ENABLED
/*#define HAL_TSC_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
/*#define HAL_EXTI_MODULE_ENABLED */
+/*#define HAL_PSSI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
@@ -296,6 +300,10 @@
#include "stm32l4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32l4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32l4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
@@ -332,6 +340,10 @@
#include "stm32l4xx_hal_ospi.h"
#endif /* HAL_OSPI_MODULE_ENABLED */
+#ifdef HAL_PKA_MODULE_ENABLED
+ #include "stm32l4xx_hal_pka.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32l4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
@@ -408,6 +420,10 @@
#include "stm32l4xx_hal_gfxmmu.h"
#endif /* HAL_GFXMMU_MODULE_ENABLED */
+#ifdef HAL_PSSI_MODULE_ENABLED
+ #include "stm32l4xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
@@ -418,7 +434,7 @@
* If expr is true, it returns no value.
* @retval None
*/
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(char *file, uint32_t line);
#else
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c
index e6b32d1921..73f4b3f008 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c
@@ -62,8 +62,22 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc1;
+ADC_HandleTypeDef hadc2;
+ADC_HandleTypeDef hadc3;
+
+LPTIM_HandleTypeDef hlptim1;
+
RTC_HandleTypeDef hrtc;
+SPI_HandleTypeDef hspi1;
+SPI_HandleTypeDef hspi2;
+SPI_HandleTypeDef hspi3;
+
+TIM_HandleTypeDef htim15;
+TIM_HandleTypeDef htim16;
+TIM_HandleTypeDef htim17;
+
UART_HandleTypeDef huart2;
/* USER CODE BEGIN PV */
@@ -76,6 +90,16 @@ void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_RTC_Init(void);
+static void MX_SPI1_Init(void);
+static void MX_SPI2_Init(void);
+static void MX_SPI3_Init(void);
+static void MX_TIM15_Init(void);
+static void MX_TIM16_Init(void);
+static void MX_TIM17_Init(void);
+static void MX_ADC1_Init(void);
+static void MX_ADC2_Init(void);
+static void MX_ADC3_Init(void);
+static void MX_LPTIM1_Init(void);
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
@@ -116,6 +140,16 @@ int main(void)
MX_GPIO_Init();
MX_USART2_UART_Init();
MX_RTC_Init();
+ MX_SPI1_Init();
+ MX_SPI2_Init();
+ MX_SPI3_Init();
+ MX_TIM15_Init();
+ MX_TIM16_Init();
+ MX_TIM17_Init();
+ MX_ADC1_Init();
+ MX_ADC2_Init();
+ MX_ADC3_Init();
+ MX_LPTIM1_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
@@ -143,11 +177,11 @@ void SystemClock_Config(void)
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
- /**Configure LSE Drive Capability
+ /** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
- /**Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
@@ -164,7 +198,7 @@ void SystemClock_Config(void)
{
Error_Handler();
}
- /**Initializes the CPU, AHB and APB busses clocks
+ /** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
@@ -177,14 +211,24 @@ void SystemClock_Config(void)
{
Error_Handler();
}
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART2;
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART2
+ |RCC_PERIPHCLK_LPTIM1|RCC_PERIPHCLK_ADC;
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+ PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK;
+ PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+ PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
+ PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
+ PeriphClkInit.PLLSAI1.PLLSAI1N = 8;
+ PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
+ PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
+ PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
+ PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_ADC1CLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
- /**Configure the main internal regulator output voltage
+ /** Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
{
@@ -192,6 +236,219 @@ void SystemClock_Config(void)
}
}
+/**
+ * @brief ADC1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_ADC1_Init(void)
+{
+
+ /* USER CODE BEGIN ADC1_Init 0 */
+
+ /* USER CODE END ADC1_Init 0 */
+
+ ADC_MultiModeTypeDef multimode = {0};
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ /* USER CODE BEGIN ADC1_Init 1 */
+
+ /* USER CODE END ADC1_Init 1 */
+ /** Common config
+ */
+ hadc1.Instance = ADC1;
+ hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
+ hadc1.Init.Resolution = ADC_RESOLUTION_12B;
+ hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+ hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+ hadc1.Init.LowPowerAutoWait = DISABLE;
+ hadc1.Init.ContinuousConvMode = DISABLE;
+ hadc1.Init.NbrOfConversion = 1;
+ hadc1.Init.DiscontinuousConvMode = DISABLE;
+ hadc1.Init.NbrOfDiscConversion = 1;
+ hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ hadc1.Init.DMAContinuousRequests = DISABLE;
+ hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+ hadc1.Init.OversamplingMode = DISABLE;
+ if (HAL_ADC_Init(&hadc1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Configure the ADC multi-mode
+ */
+ multimode.Mode = ADC_MODE_INDEPENDENT;
+ if (HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Configure Regular Channel
+ */
+ sConfig.Channel = ADC_CHANNEL_1;
+ sConfig.Rank = ADC_REGULAR_RANK_1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
+ sConfig.SingleDiff = ADC_SINGLE_ENDED;
+ sConfig.OffsetNumber = ADC_OFFSET_NONE;
+ sConfig.Offset = 0;
+ if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN ADC1_Init 2 */
+
+ /* USER CODE END ADC1_Init 2 */
+
+}
+
+/**
+ * @brief ADC2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_ADC2_Init(void)
+{
+
+ /* USER CODE BEGIN ADC2_Init 0 */
+
+ /* USER CODE END ADC2_Init 0 */
+
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ /* USER CODE BEGIN ADC2_Init 1 */
+
+ /* USER CODE END ADC2_Init 1 */
+ /** Common config
+ */
+ hadc2.Instance = ADC2;
+ hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
+ hadc2.Init.Resolution = ADC_RESOLUTION_12B;
+ hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hadc2.Init.ScanConvMode = ADC_SCAN_DISABLE;
+ hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+ hadc2.Init.LowPowerAutoWait = DISABLE;
+ hadc2.Init.ContinuousConvMode = DISABLE;
+ hadc2.Init.NbrOfConversion = 1;
+ hadc2.Init.DiscontinuousConvMode = DISABLE;
+ hadc2.Init.NbrOfDiscConversion = 1;
+ hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ hadc2.Init.DMAContinuousRequests = DISABLE;
+ hadc2.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+ hadc2.Init.OversamplingMode = DISABLE;
+ if (HAL_ADC_Init(&hadc2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Configure Regular Channel
+ */
+ sConfig.Channel = ADC_CHANNEL_2;
+ sConfig.Rank = ADC_REGULAR_RANK_1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
+ sConfig.SingleDiff = ADC_SINGLE_ENDED;
+ sConfig.OffsetNumber = ADC_OFFSET_NONE;
+ sConfig.Offset = 0;
+ if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN ADC2_Init 2 */
+
+ /* USER CODE END ADC2_Init 2 */
+
+}
+
+/**
+ * @brief ADC3 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_ADC3_Init(void)
+{
+
+ /* USER CODE BEGIN ADC3_Init 0 */
+
+ /* USER CODE END ADC3_Init 0 */
+
+ ADC_ChannelConfTypeDef sConfig = {0};
+
+ /* USER CODE BEGIN ADC3_Init 1 */
+
+ /* USER CODE END ADC3_Init 1 */
+ /** Common config
+ */
+ hadc3.Instance = ADC3;
+ hadc3.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
+ hadc3.Init.Resolution = ADC_RESOLUTION_12B;
+ hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
+ hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+ hadc3.Init.LowPowerAutoWait = DISABLE;
+ hadc3.Init.ContinuousConvMode = DISABLE;
+ hadc3.Init.NbrOfConversion = 1;
+ hadc3.Init.DiscontinuousConvMode = DISABLE;
+ hadc3.Init.NbrOfDiscConversion = 1;
+ hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+ hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ hadc3.Init.DMAContinuousRequests = DISABLE;
+ hadc3.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+ hadc3.Init.OversamplingMode = DISABLE;
+ if (HAL_ADC_Init(&hadc3) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Configure Regular Channel
+ */
+ sConfig.Channel = ADC_CHANNEL_3;
+ sConfig.Rank = ADC_REGULAR_RANK_1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
+ sConfig.SingleDiff = ADC_SINGLE_ENDED;
+ sConfig.OffsetNumber = ADC_OFFSET_NONE;
+ sConfig.Offset = 0;
+ if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN ADC3_Init 2 */
+
+ /* USER CODE END ADC3_Init 2 */
+
+}
+
+/**
+ * @brief LPTIM1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_LPTIM1_Init(void)
+{
+
+ /* USER CODE BEGIN LPTIM1_Init 0 */
+
+ /* USER CODE END LPTIM1_Init 0 */
+
+ /* USER CODE BEGIN LPTIM1_Init 1 */
+
+ /* USER CODE END LPTIM1_Init 1 */
+ hlptim1.Instance = LPTIM1;
+ hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+ hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+ hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+ hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+ hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+ hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+ hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
+ hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+ if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN LPTIM1_Init 2 */
+
+ /* USER CODE END LPTIM1_Init 2 */
+
+}
+
/**
* @brief RTC Initialization Function
* @param None
@@ -207,7 +464,7 @@ static void MX_RTC_Init(void)
/* USER CODE BEGIN RTC_Init 1 */
/* USER CODE END RTC_Init 1 */
- /**Initialize RTC Only
+ /** Initialize RTC Only
*/
hrtc.Instance = RTC;
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
@@ -227,6 +484,236 @@ static void MX_RTC_Init(void)
}
+/**
+ * @brief SPI1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI1_Init(void)
+{
+
+ /* USER CODE BEGIN SPI1_Init 0 */
+
+ /* USER CODE END SPI1_Init 0 */
+
+ /* USER CODE BEGIN SPI1_Init 1 */
+
+ /* USER CODE END SPI1_Init 1 */
+ /* SPI1 parameter configuration*/
+ hspi1.Instance = SPI1;
+ hspi1.Init.Mode = SPI_MODE_MASTER;
+ hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+ hspi1.Init.DataSize = SPI_DATASIZE_4BIT;
+ hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi1.Init.NSS = SPI_NSS_SOFT;
+ hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+ hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi1.Init.CRCPolynomial = 7;
+ hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+ if (HAL_SPI_Init(&hspi1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI1_Init 2 */
+
+ /* USER CODE END SPI1_Init 2 */
+
+}
+
+/**
+ * @brief SPI2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI2_Init(void)
+{
+
+ /* USER CODE BEGIN SPI2_Init 0 */
+
+ /* USER CODE END SPI2_Init 0 */
+
+ /* USER CODE BEGIN SPI2_Init 1 */
+
+ /* USER CODE END SPI2_Init 1 */
+ /* SPI2 parameter configuration*/
+ hspi2.Instance = SPI2;
+ hspi2.Init.Mode = SPI_MODE_MASTER;
+ hspi2.Init.Direction = SPI_DIRECTION_2LINES;
+ hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
+ hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi2.Init.NSS = SPI_NSS_SOFT;
+ hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+ hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi2.Init.CRCPolynomial = 7;
+ hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+ if (HAL_SPI_Init(&hspi2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI2_Init 2 */
+
+ /* USER CODE END SPI2_Init 2 */
+
+}
+
+/**
+ * @brief SPI3 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI3_Init(void)
+{
+
+ /* USER CODE BEGIN SPI3_Init 0 */
+
+ /* USER CODE END SPI3_Init 0 */
+
+ /* USER CODE BEGIN SPI3_Init 1 */
+
+ /* USER CODE END SPI3_Init 1 */
+ /* SPI3 parameter configuration*/
+ hspi3.Instance = SPI3;
+ hspi3.Init.Mode = SPI_MODE_MASTER;
+ hspi3.Init.Direction = SPI_DIRECTION_2LINES;
+ hspi3.Init.DataSize = SPI_DATASIZE_4BIT;
+ hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi3.Init.NSS = SPI_NSS_SOFT;
+ hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+ hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi3.Init.CRCPolynomial = 7;
+ hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hspi3.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+ if (HAL_SPI_Init(&hspi3) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI3_Init 2 */
+
+ /* USER CODE END SPI3_Init 2 */
+
+}
+
+/**
+ * @brief TIM15 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM15_Init(void)
+{
+
+ /* USER CODE BEGIN TIM15_Init 0 */
+
+ /* USER CODE END TIM15_Init 0 */
+
+ TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+ /* USER CODE BEGIN TIM15_Init 1 */
+
+ /* USER CODE END TIM15_Init 1 */
+ htim15.Instance = TIM15;
+ htim15.Init.Prescaler = 0;
+ htim15.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim15.Init.Period = 0;
+ htim15.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim15.Init.RepetitionCounter = 0;
+ htim15.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim15) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+ if (HAL_TIM_ConfigClockSource(&htim15, &sClockSourceConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim15, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM15_Init 2 */
+
+ /* USER CODE END TIM15_Init 2 */
+
+}
+
+/**
+ * @brief TIM16 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM16_Init(void)
+{
+
+ /* USER CODE BEGIN TIM16_Init 0 */
+
+ /* USER CODE END TIM16_Init 0 */
+
+ /* USER CODE BEGIN TIM16_Init 1 */
+
+ /* USER CODE END TIM16_Init 1 */
+ htim16.Instance = TIM16;
+ htim16.Init.Prescaler = 0;
+ htim16.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim16.Init.Period = 0;
+ htim16.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim16.Init.RepetitionCounter = 0;
+ htim16.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim16) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM16_Init 2 */
+
+ /* USER CODE END TIM16_Init 2 */
+
+}
+
+/**
+ * @brief TIM17 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_TIM17_Init(void)
+{
+
+ /* USER CODE BEGIN TIM17_Init 0 */
+
+ /* USER CODE END TIM17_Init 0 */
+
+ /* USER CODE BEGIN TIM17_Init 1 */
+
+ /* USER CODE END TIM17_Init 1 */
+ htim17.Instance = TIM17;
+ htim17.Init.Prescaler = 0;
+ htim17.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim17.Init.Period = 0;
+ htim17.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim17.Init.RepetitionCounter = 0;
+ htim17.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim17) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM17_Init 2 */
+
+ /* USER CODE END TIM17_Init 2 */
+
+}
+
/**
* @brief USART2 Initialization Function
* @param None
@@ -273,6 +760,7 @@ static void MX_GPIO_Init(void)
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
}
@@ -302,7 +790,7 @@ void Error_Handler(void)
* @param line: assert_param error line source number
* @retval None
*/
-void assert_failed(char *file, uint32_t line)
+void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index b693d8d190..dda464c29e 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -97,6 +97,207 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
+static uint32_t HAL_RCC_ADC_CLK_ENABLED=0;
+
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(hadc->Instance==ADC1)
+ {
+ /* USER CODE BEGIN ADC1_MspInit 0 */
+
+ /* USER CODE END ADC1_MspInit 0 */
+ /* Peripheral clock enable */
+ HAL_RCC_ADC_CLK_ENABLED++;
+ if(HAL_RCC_ADC_CLK_ENABLED==1){
+ __HAL_RCC_ADC_CLK_ENABLE();
+ }
+
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ /**ADC1 GPIO Configuration
+ PC0 ------> ADC1_IN1
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_0;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN ADC1_MspInit 1 */
+
+ /* USER CODE END ADC1_MspInit 1 */
+ }
+ else if(hadc->Instance==ADC2)
+ {
+ /* USER CODE BEGIN ADC2_MspInit 0 */
+
+ /* USER CODE END ADC2_MspInit 0 */
+ /* Peripheral clock enable */
+ HAL_RCC_ADC_CLK_ENABLED++;
+ if(HAL_RCC_ADC_CLK_ENABLED==1){
+ __HAL_RCC_ADC_CLK_ENABLE();
+ }
+
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ /**ADC2 GPIO Configuration
+ PC1 ------> ADC2_IN2
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_1;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN ADC2_MspInit 1 */
+
+ /* USER CODE END ADC2_MspInit 1 */
+ }
+ else if(hadc->Instance==ADC3)
+ {
+ /* USER CODE BEGIN ADC3_MspInit 0 */
+
+ /* USER CODE END ADC3_MspInit 0 */
+ /* Peripheral clock enable */
+ HAL_RCC_ADC_CLK_ENABLED++;
+ if(HAL_RCC_ADC_CLK_ENABLED==1){
+ __HAL_RCC_ADC_CLK_ENABLE();
+ }
+
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ /**ADC3 GPIO Configuration
+ PC2 ------> ADC3_IN3
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_2;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN ADC3_MspInit 1 */
+
+ /* USER CODE END ADC3_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+ if(hadc->Instance==ADC1)
+ {
+ /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+ /* USER CODE END ADC1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ HAL_RCC_ADC_CLK_ENABLED--;
+ if(HAL_RCC_ADC_CLK_ENABLED==0){
+ __HAL_RCC_ADC_CLK_DISABLE();
+ }
+
+ /**ADC1 GPIO Configuration
+ PC0 ------> ADC1_IN1
+ */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
+
+ /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+ /* USER CODE END ADC1_MspDeInit 1 */
+ }
+ else if(hadc->Instance==ADC2)
+ {
+ /* USER CODE BEGIN ADC2_MspDeInit 0 */
+
+ /* USER CODE END ADC2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ HAL_RCC_ADC_CLK_ENABLED--;
+ if(HAL_RCC_ADC_CLK_ENABLED==0){
+ __HAL_RCC_ADC_CLK_DISABLE();
+ }
+
+ /**ADC2 GPIO Configuration
+ PC1 ------> ADC2_IN2
+ */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1);
+
+ /* USER CODE BEGIN ADC2_MspDeInit 1 */
+
+ /* USER CODE END ADC2_MspDeInit 1 */
+ }
+ else if(hadc->Instance==ADC3)
+ {
+ /* USER CODE BEGIN ADC3_MspDeInit 0 */
+
+ /* USER CODE END ADC3_MspDeInit 0 */
+ /* Peripheral clock disable */
+ HAL_RCC_ADC_CLK_ENABLED--;
+ if(HAL_RCC_ADC_CLK_ENABLED==0){
+ __HAL_RCC_ADC_CLK_DISABLE();
+ }
+
+ /**ADC3 GPIO Configuration
+ PC2 ------> ADC3_IN3
+ */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
+
+ /* USER CODE BEGIN ADC3_MspDeInit 1 */
+
+ /* USER CODE END ADC3_MspDeInit 1 */
+ }
+
+}
+
+/**
+* @brief LPTIM MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
+{
+ if(hlptim->Instance==LPTIM1)
+ {
+ /* USER CODE BEGIN LPTIM1_MspInit 0 */
+
+ /* USER CODE END LPTIM1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_LPTIM1_CLK_ENABLE();
+ /* USER CODE BEGIN LPTIM1_MspInit 1 */
+
+ /* USER CODE END LPTIM1_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief LPTIM MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim)
+{
+ if(hlptim->Instance==LPTIM1)
+ {
+ /* USER CODE BEGIN LPTIM1_MspDeInit 0 */
+
+ /* USER CODE END LPTIM1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_LPTIM1_CLK_DISABLE();
+ /* USER CODE BEGIN LPTIM1_MspDeInit 1 */
+
+ /* USER CODE END LPTIM1_MspDeInit 1 */
+ }
+
+}
+
/**
* @brief RTC MSP Initialization
* This function configures the hardware resources used in this example
@@ -105,7 +306,6 @@ void HAL_MspInit(void)
*/
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
-
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspInit 0 */
@@ -126,10 +326,8 @@ void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
* @param hrtc: RTC handle pointer
* @retval None
*/
-
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
{
-
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspDeInit 0 */
@@ -144,6 +342,259 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
}
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspInit 0 */
+
+ /* USER CODE END SPI1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_SPI1_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**SPI1 GPIO Configuration
+ PA5 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN SPI1_MspInit 1 */
+
+ /* USER CODE END SPI1_MspInit 1 */
+ }
+ else if(hspi->Instance==SPI2)
+ {
+ /* USER CODE BEGIN SPI2_MspInit 0 */
+
+ /* USER CODE END SPI2_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_SPI2_CLK_ENABLE();
+
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ /**SPI2 GPIO Configuration
+ PC3 ------> SPI2_MOSI
+ PB10 ------> SPI2_SCK
+ PB14 ------> SPI2_MISO
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_3;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_14;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN SPI2_MspInit 1 */
+
+ /* USER CODE END SPI2_MspInit 1 */
+ }
+ else if(hspi->Instance==SPI3)
+ {
+ /* USER CODE BEGIN SPI3_MspInit 0 */
+
+ /* USER CODE END SPI3_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_SPI3_CLK_ENABLE();
+
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ /**SPI3 GPIO Configuration
+ PC10 ------> SPI3_SCK
+ PC11 ------> SPI3_MISO
+ PC12 ------> SPI3_MOSI
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN SPI3_MspInit 1 */
+
+ /* USER CODE END SPI3_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspDeInit 0 */
+
+ /* USER CODE END SPI1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_SPI1_CLK_DISABLE();
+
+ /**SPI1 GPIO Configuration
+ PA5 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
+
+ /* USER CODE BEGIN SPI1_MspDeInit 1 */
+
+ /* USER CODE END SPI1_MspDeInit 1 */
+ }
+ else if(hspi->Instance==SPI2)
+ {
+ /* USER CODE BEGIN SPI2_MspDeInit 0 */
+
+ /* USER CODE END SPI2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_SPI2_CLK_DISABLE();
+
+ /**SPI2 GPIO Configuration
+ PC3 ------> SPI2_MOSI
+ PB10 ------> SPI2_SCK
+ PB14 ------> SPI2_MISO
+ */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
+
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_14);
+
+ /* USER CODE BEGIN SPI2_MspDeInit 1 */
+
+ /* USER CODE END SPI2_MspDeInit 1 */
+ }
+ else if(hspi->Instance==SPI3)
+ {
+ /* USER CODE BEGIN SPI3_MspDeInit 0 */
+
+ /* USER CODE END SPI3_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_SPI3_CLK_DISABLE();
+
+ /**SPI3 GPIO Configuration
+ PC10 ------> SPI3_SCK
+ PC11 ------> SPI3_MISO
+ PC12 ------> SPI3_MOSI
+ */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
+
+ /* USER CODE BEGIN SPI3_MspDeInit 1 */
+
+ /* USER CODE END SPI3_MspDeInit 1 */
+ }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+ if(htim_base->Instance==TIM15)
+ {
+ /* USER CODE BEGIN TIM15_MspInit 0 */
+
+ /* USER CODE END TIM15_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_TIM15_CLK_ENABLE();
+ /* USER CODE BEGIN TIM15_MspInit 1 */
+
+ /* USER CODE END TIM15_MspInit 1 */
+ }
+ else if(htim_base->Instance==TIM16)
+ {
+ /* USER CODE BEGIN TIM16_MspInit 0 */
+
+ /* USER CODE END TIM16_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_TIM16_CLK_ENABLE();
+ /* USER CODE BEGIN TIM16_MspInit 1 */
+
+ /* USER CODE END TIM16_MspInit 1 */
+ }
+ else if(htim_base->Instance==TIM17)
+ {
+ /* USER CODE BEGIN TIM17_MspInit 0 */
+
+ /* USER CODE END TIM17_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_TIM17_CLK_ENABLE();
+ /* USER CODE BEGIN TIM17_MspInit 1 */
+
+ /* USER CODE END TIM17_MspInit 1 */
+ }
+
+}
+
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+ if(htim_base->Instance==TIM15)
+ {
+ /* USER CODE BEGIN TIM15_MspDeInit 0 */
+
+ /* USER CODE END TIM15_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM15_CLK_DISABLE();
+ /* USER CODE BEGIN TIM15_MspDeInit 1 */
+
+ /* USER CODE END TIM15_MspDeInit 1 */
+ }
+ else if(htim_base->Instance==TIM16)
+ {
+ /* USER CODE BEGIN TIM16_MspDeInit 0 */
+
+ /* USER CODE END TIM16_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM16_CLK_DISABLE();
+ /* USER CODE BEGIN TIM16_MspDeInit 1 */
+
+ /* USER CODE END TIM16_MspDeInit 1 */
+ }
+ else if(htim_base->Instance==TIM17)
+ {
+ /* USER CODE BEGIN TIM17_MspDeInit 0 */
+
+ /* USER CODE END TIM17_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM17_CLK_DISABLE();
+ /* USER CODE BEGIN TIM17_MspDeInit 1 */
+
+ /* USER CODE END TIM17_MspDeInit 1 */
+ }
+
+}
+
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
@@ -152,7 +603,6 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
-
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART2)
{
@@ -187,10 +637,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
* @param huart: UART handle pointer
* @retval None
*/
-
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
-
if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c
index ab5c0b7d8e..e13a77a0e6 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c
@@ -71,6 +71,7 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
+
/* USER CODE BEGIN EV */
/* USER CODE END EV */
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig
index 5089c9f623..687ad3a85e 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig
+++ b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig
@@ -89,6 +89,93 @@ menu "On-chip Peripheral Drivers"
endif
endif
+ menuconfig BSP_USING_SPI
+ bool "Enable SPI BUS"
+ default n
+ select RT_USING_SPI
+ if BSP_USING_SPI
+ config BSP_USING_SPI1
+ bool "Enable SPI1 BUS"
+ default n
+
+ config BSP_SPI1_TX_USING_DMA
+ bool "Enable SPI1 TX DMA"
+ depends on BSP_USING_SPI1
+ default n
+
+ config BSP_SPI1_RX_USING_DMA
+ bool "Enable SPI1 RX DMA"
+ depends on BSP_USING_SPI1
+ select BSP_SPI1_TX_USING_DMA
+ default n
+
+ config BSP_USING_SPI2
+ bool "Enable SPI2 BUS"
+ default n
+
+ config BSP_SPI2_TX_USING_DMA
+ bool "Enable SPI2 TX DMA"
+ depends on BSP_USING_SPI2
+ default n
+
+ config BSP_SPI2_RX_USING_DMA
+ bool "Enable SPI2 RX DMA"
+ depends on BSP_USING_SPI2
+ select BSP_SPI2_TX_USING_DMA
+ default n
+
+ config BSP_USING_SPI3
+ bool "Enable SPI3 BUS"
+ default n
+
+ config BSP_SPI3_TX_USING_DMA
+ bool "Enable SPI3 TX DMA"
+ depends on BSP_USING_SPI3
+ default n
+
+ config BSP_SPI3_RX_USING_DMA
+ bool "Enable SPI3 RX DMA"
+ depends on BSP_USING_SPI3
+ select BSP_SPI3_TX_USING_DMA
+ default n
+ endif
+
+ menuconfig BSP_USING_TIM
+ bool "Enable timer"
+ default n
+ select RT_USING_HWTIMER
+ if BSP_USING_TIM
+ config BSP_USING_TIM15
+ bool "Enable TIM15"
+ default n
+
+ config BSP_USING_TIM16
+ bool "Enable TIM16"
+ default n
+
+ config BSP_USING_TIM17
+ bool "Enable TIM17"
+ default n
+ endif
+
+ menuconfig BSP_USING_ADC
+ bool "Enable ADC"
+ default n
+ select RT_USING_ADC
+ if BSP_USING_ADC
+ config BSP_USING_ADC1
+ bool "Enable ADC1"
+ default n
+
+ config BSP_USING_ADC2
+ bool "Enable ADC2"
+ default n
+
+ config BSP_USING_ADC3
+ bool "Enable ADC3"
+ default n
+ endif
+
menuconfig BSP_USING_ONCHIP_RTC
bool "Enable RTC"
select RT_USING_RTC