Merge pull request #3814 from thread-liu/stm32mp1-ev1

[update] add stm32mp1-st-ev1 bsp.

bsp/stm32/libraries/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/arm/startup_stm32mp15xx.s

@@ -14,8 +14,8 @@
 ;****************************************************************************** 
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+;* &copy; Copyright (c) 2019 STMicroelectronics. 
-;* All rights reserved.</center></h2>
+;* All rights reserved.
 ;*
 ;* This software component is licensed by ST under BSD 3-Clause license,
 ;* the "License"; You may not use this file except in compliance with the 
@@ -30,7 +30,7 @@
 ;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
 ; </h>
 
-Stack_Size      EQU     0x00000400
+Stack_Size      EQU     0x00000800
 
                 AREA    STACK, NOINIT, READWRITE, ALIGN=3
 __stack_limit

bsp/stm32/stm32mp157a-st-ev1/.config

@@ -0,0 +1,450 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+CONFIG_RT_USING_MEMHEAP=y
+# CONFIG_RT_USING_NOHEAP is not set
+# CONFIG_RT_USING_SMALL_MEM is not set
+# CONFIG_RT_USING_SLAB is not set
+CONFIG_RT_USING_MEMHEAP_AS_HEAP=y
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart4"
+CONFIG_RT_VER_NUM=0x40003
+CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M4=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+# CONFIG_FINSH_USING_MSH_ONLY is not set
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+CONFIG_SOC_FAMILY_STM32=y
+CONFIG_SOC_SERIES_STM32MP1=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_STM32MP157A=y
+
+#
+# Onboard Peripheral Drivers
+#
+CONFIG_BSP_USING_STLINK_TO_USART=y
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+# CONFIG_BSP_USING_WWDG is not set
+CONFIG_BSP_USING_UART=y
+# CONFIG_BSP_USING_UART3 is not set
+# CONFIG_BSP_UART3_RX_USING_DMA is not set
+CONFIG_BSP_USING_UART4=y
+# CONFIG_BSP_UART4_RX_USING_DMA is not set
+# CONFIG_BSP_UART4_TX_USING_DMA is not set
+# CONFIG_BSP_USING_TIM is not set
+# CONFIG_BSP_USING_LPTIM is not set
+# CONFIG_BSP_USING_PWM is not set
+# CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_DAC is not set
+# CONFIG_BSP_USING_I2C1 is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_CRC is not set
+# CONFIG_BSP_USING_RNG is not set
+# CONFIG_BSP_USING_UDID is not set
+
+#
+# Board extended module Drivers
+#

bsp/stm32/stm32mp157a-st-ev1/.gitignore

@@ -0,0 +1,42 @@
+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h

bsp/stm32/stm32mp157a-st-ev1/.project

@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+  <name>stm32mp157a-st-ev1</name>
+  <comment />
+  <projects>
+	</projects>
+  <buildSpec>
+    <buildCommand>
+      <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+      <triggers>clean,full,incremental,</triggers>
+      <arguments>
+			</arguments>
+    </buildCommand>
+    <buildCommand>
+      <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+      <triggers>full,incremental,</triggers>
+      <arguments>
+			</arguments>
+    </buildCommand>
+  </buildSpec>
+  <natures>
+    <nature>org.eclipse.cdt.core.cnature</nature>
+    <nature>org.rt-thread.studio.rttnature</nature>
+    <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+    <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+  </natures>
+  <linkedResources>
+    </linkedResources>
+</projectDescription>

bsp/stm32/stm32mp157a-st-ev1/.settings/language.settings.xml

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<project>
+	<configuration id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.debug.553091094" name="Debug">
+		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
+			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
+			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
+			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
+			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="371189542906764503" id="ilg.gnuarmeclipse.managedbuild.cross.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT ARM Cross GCC Built-in Compiler Settings " parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+				<language-scope id="org.eclipse.cdt.core.gcc"/>
+				<language-scope id="org.eclipse.cdt.core.g++"/>
+			</provider>
+		</extension>
+	</configuration>
+</project>

bsp/stm32/stm32mp157a-st-ev1/.settings/org.eclipse.core.runtime.prefs

@@ -0,0 +1,3 @@
+content-types/enabled=true
+content-types/org.eclipse.cdt.core.asmSource/file-extensions=s
+eclipse.preferences.version=1

bsp/stm32/stm32mp157a-st-ev1/.settings/projcfg.ini

@@ -0,0 +1,8 @@
+#RT-Thread Studio Project Configuration
+#Thu Jul 23 15:17:50 CST 2020
+mcu_name=STM32MP157A
+hardware_adapter=ST-LINK
+mcu_base_nano_proj=true
+selected_rtt_version=latest
+project_base_bsp=true
+cfg_version=v2.0

bsp/stm32/stm32mp157a-st-ev1/.settings/stm32mp1.JLink.Debug.rttlaunch

@@ -0,0 +1,82 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="ilg.gnumcueclipse.debug.gdbjtag.jlink.launchConfigurationType">
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.adapterName" value="J-Link"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doConnectToRunning" value="false"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doContinue" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doDebugInRam" value="false"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doFirstReset" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerAllocateConsole" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerAllocateSemihostingConsole" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerInitRegs" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerLocalOnly" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerSilent" value="false"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doGdbServerVerifyDownload" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doSecondReset" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.doStartGdbServer" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.enableFlashBreakpoints" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.enableSemihosting" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.enableSemihostingIoclientGdbClient" value="false"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.enableSemihostingIoclientTelnet" value="true"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.enableSwo" value="true"/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.firstResetSpeed" value="1000"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.firstResetType" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.flashDeviceName" value="STM32MP157A"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbClientOtherCommands" value="set mem inaccessible-by-default off"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbClientOtherOptions" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerConnection" value="usb"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerConnectionAddress" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerDebugInterface" value="swd"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerDeviceEndianness" value="little"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerDeviceName" value="STM32MP157A"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerDeviceSpeed" value="1000"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerExecutable" value="${rtt_install_path}/repo/Extract/Debugger_Support_Packages/SEGGER/J-Link/6.30i/JLinkGDBServerCL.exe"/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerGdbPortNumber" value="2331"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerLog" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerOther" value="-singlerun"/>
+<booleanAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerRunAfterStopDebug" value="true"/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerSwoPortNumber" value="2332"/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.gdbServerTelnetPortNumber" value="2333"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.interfaceSpeed" value="auto"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.jlinkExecutable" value="${rtt_install_path}/repo/Extract/Debugger_Support_Packages/SEGGER/J-Link/6.30i/JLink.exe"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.otherInitCommands" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.otherRunCommands" value=""/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.secondResetType" value=""/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.swoEnableTargetCpuFreq" value="0"/>
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.swoEnableTargetPortMask" value="0x1"/>
+<intAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.swoEnableTargetSwoFreq" value="0"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="GNU MCU J-Link"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="2331"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${rtt_gnu_gcc}/arm-none-eabi-gdb.exe"/>
+<booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/rtthread.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="stm32mp1"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/stm32mp1"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<stringAttribute key="org.eclipse.debug.core.source_locator_id" value="org.eclipse.cdt.debug.core.sourceLocator"/>
+<stringAttribute key="org.eclipse.debug.core.source_locator_memento" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;sourceLookupDirector&gt;&#13;&#10;&lt;sourceContainers duplicates=&quot;false&quot;&gt;&#13;&#10;&lt;container memento=&quot;&amp;lt;?xml version=&amp;quot;1.0&amp;quot; encoding=&amp;quot;UTF-8&amp;quot; standalone=&amp;quot;no&amp;quot;?&amp;gt;&amp;#13;&amp;#10;&amp;lt;default/&amp;gt;&amp;#13;&amp;#10;&quot; typeId=&quot;org.eclipse.debug.core.containerType.default&quot;/&gt;&#13;&#10;&lt;/sourceContainers&gt;&#13;&#10;&lt;/sourceLookupDirector&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.debug.ui.ATTR_CONSOLE_ENCODING" value="GBK"/>
+<booleanAttribute key="org.eclipse.debug.ui.ATTR_CONSOLE_OUTPUT_ON" value="true"/>
+<booleanAttribute key="org.eclipse.debug.ui.ATTR_LAUNCH_IN_BACKGROUND" value="true"/>
+</launchConfiguration>

bsp/stm32/stm32mp157a-st-ev1/.settings/stm32mp1.STLink.Debug.rttlaunch

@@ -0,0 +1,51 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="ilg.gnumcueclipse.debug.gdbjtag.jlink.adapterName" value="ST-LINK"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.connectMode" value="NORMAL"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.debugInterface" value="SWD"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="3"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.erase" value="--skipErase"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.flashVerify" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDeviceId" value="org.eclipse.cdt.debug.gdbjtag.core.jtagdevice.genericDevice"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.otherDownloadOption" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.otherGdbserverOption" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61235"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.resetMode" value=" -rst"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.resetRun" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${rtt_gnu_gcc}/arm-none-eabi-gdb.exe"/>
+<booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/rtthread.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="stm32mp1"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/stm32mp1"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<stringAttribute key="org.eclipse.debug.ui.ATTR_CONSOLE_ENCODING" value="GBK"/>
+</launchConfiguration>

bsp/stm32/stm32mp157a-st-ev1/Kconfig

@@ -0,0 +1,22 @@
+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"
+

bsp/stm32/stm32mp157a-st-ev1/README.md

@@ -0,0 +1,165 @@
+# STM32MP157A-EV1 BSP (Board Support Package) Execution Instruction
+
+[中文页](README_zh.md) |
+
+## Introduction
+
+This document records the execution instruction of the BSP (board support package) provided by the RT-Thread development team for the STM32MP157A-EV1 development board.
+
+The document is covered in three parts:
+
+- STM32MP157A-EV1 Board Resources Introduction
+
+- Quickly Get Started
+
+- Advanced Features
+
+By reading the Quickly Get Started section developers can quickly get their hands on this BSP and run RT-Thread on the board. More advanced features will be introduced in the Advanced Features section to help developers take advantage of RT-Thread to drive more on-board resources.
+
+## STM32MP157A-EV1 Board Resources Introduction
+
+The STM32MP157A-EV1 is a development board based on a dual Cortex-A7 and Cortex-M4 core. The Cortex-A7 core operates at 650 MHZ and the Cortex-M4 operates at 209MHZ. There is no Flash inside the STM32MP157A.
+
+![board](figures/board.png)
+
+The mainly-used **on-board resources** are shown as follows:
+
+- MCU : STM32MP157AAAx
+- Common peripherals:
+  - 4 LEDs: LD4(PD8), LD5(PD9), LD2(PA13), LD3(PA14)
+  - 4 Buttons:  WAKE_UP, RESET (NRST), USER1(PA13), USER2 (PA14)
+- Common-used interface: USB, SD card, Ethernet, MIPI, USB HOST, Audio, HDMI, Arduino.
+- Debug interface: Standard JTAG/SWD.
+
+For more details about this board, please refer to the ST official documentation:
+
+[STM32MP157A-EV1 Development board introduction](https://www.st.com/content/st_com/zh/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-eval-boards/stm32mp157a-ev1.html)
+
+## Peripheral Condition
+
+Each peripheral supporting condition for this BSP is as follows:
+
+| On-board Peripheral            | **Support** |    **Remark**    |
+| :----------------------------- | :---------: | :--------------: |
+| USB TO UART                    |     YES     |                  |
+| PMIC                           |     NO      |                  |
+| CAMERA                         |     NO      |      OV5640      |
+| MFX                            |     NO      |                  |
+| FMC                            |     NO      | MT25F8G08A8ACAH4 |
+| QSPI FLASH                     |     NO      |   MX25L51245G    |
+| OpenAMP                        |     NO      |                  |
+| POWER                          |     NO      |                  |
+| SD Card (SDMMC1)               |     NO      |                  |
+| EMMC(SDMMC2)                   |     NO      |                  |
+| ETH                            |     NO      |                  |
+| AUDIO                          |     NO      |      WM8994      |
+| **On-chip Peripheral Drivers** | **Support** |    **Remark**    |
+| GPIO                           |     YES     |                  |
+| UART                           |     YES     | UART4 (ST-Link)  |
+| EXTI                           |     YES     |                  |
+| SPI                            |     YES     |                  |
+| TIM                            |     YES     |                  |
+| LPTIM                          |     YES     |                  |
+| I2C                            |     YES     |     Software     |
+| ADC                            |     YES     |                  |
+| DAC                            |     YES     |                  |
+| WWDG                           |     YES     |                  |
+| MDMA                           |     NO      |                  |
+| SPDIFRX                        |     NO      |                  |
+| DFSDM                          |     NO      |                  |
+| PWM                            |     NO      |                  |
+| FDCAN                          |     NO      |                  |
+| CRC                            |     NO      |                  |
+| RNG                            |     NO      |                  |
+| HASH                           |     NO      |                  |
+
+## Execution Instruction
+
+### Quickly Get Started
+
+This BSP provides MDK4,MDK5 and IAR projects for developers. Also support GCC development environment,Here's an example of the MDK5 development environment, to introduce how to run the system.
+
+#### Hardware Connection
+
+Use a USB cable to connect the development board to the PC and turn on the power switch.
+
+#### Compile And Download
+
+Double-click the project.uvprojx file, to open the MDK5 project, compile and download the program to the board.
+
+> By default, the project uses ST_LINK simulator to download the program, when the ST_LINK connects the board, clicking the download button can download the program to the board.
+
+#### Running Results
+
+After the program is successfully downloaded, the system runs automatically. Observe the running results of the LED on the development board, the orange LD4 will flash periodically.
+
+Connect the serial port of the board to PC, communicate with it via a serial terminal tool (115200-8-1-N). Restart the board and the startup information of RT-Thread will be observed:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     3.1.1 build Nov 19 2018
+ 2006 - 2018 Copyright by rt-thread team
+msh >
+```
+
+#### Drivers
+
+##### 1. DAC
+
+- Open the [Env](https://www.rt-thread.io/download.html?download=Env) tool under this BSP;
+- Enter the `menuconfig` command, enter the Hardware Drivers config and open DAC, save and exit;
+- Enter the `scons --target=iar` command to regenerate project.
+
+###### Finsh
+
+Before you use a device, you need to find out if the device exists, and you can use the name of the DAC device that is enrolled with the command  `dac probe` . As shown as follows.
+
+```c
+msh />dac probe dac1
+probe dac1 success
+```
+
+Enable the channel of the device can use the command  `dac enable`  followed by the channel number.
+
+ ```c
+msh />dac probe dac1
+probe dac1 success
+ ```
+
+Set up the data of the channel for a DAC device can use the command  `dac write` followed by the channel number.
+
+```c
+msh />dac write 1 1000
+dac1 channel 1 write value is 1000
+```
+
+Disable the channel of the device can use the command `dac disable` followed by the channel number.
+
+```c
+msh />dac disable 1
+dac1 channel 1 disable success
+```
+
+### Advanced Features
+
+This BSP only enables GPIO and serial port 4 by default. If need more advanced features, you need to configure the BSP with RT-Thread Env tools, as follows:
+
+- Open the [Env](https://www.rt-thread.io/download.html?download=Env) tool under this BSP;
+- Enter the `menuconfig` command to configure the project, then save and exit;
+- Enter the  `pkgs --update` command to update the packages;
+- Enter the `scons --target=iar`command to regenerate the  project.
+
+## Notes
+
+- Before downloading the program, set the board to the mode of "Engineering Mode".  The BOOT switch sets to BOOT0=0,BOOT1 = 0 and BOOT2=1, as shown below:
+
+![boot](figures/boot.png)
+
+- If need to reburn the program, please reset the development board.
+
+## Contact Information
+
+accendant:
+
+- [liukang](https://github.com/thread-liu)

bsp/stm32/stm32mp157a-st-ev1/README_zh.md

@@ -0,0 +1,179 @@
+# STM32MP157A-EV1 开发板 BSP 说明
+
+## 简介
+
+本文档为 RT-Thread 开发团队为 STM32MP157A-EV1 开发板提供的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+STM32MP157A-EV1 是 ST 推出的一款基于双 Cortex-A7  + Cortex-M4 内核的开发板。Cortex-A7 核工作频率为 650MHZ，Cortex-M4 工作频率为 209MHZ。
+
+开发板外观如下图所示：
+
+​											![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下：
+
+- MCU：STM32MP157AAAx
+- 常用外设
+  - LED：4个 ，LD4(PD8), LD5(PD9), LD2(PA13), LD3(PA14)
+  - 按键，4个，WAKE_UP, RESET (NRST), USER1(PA13), USER2 (PA14)
+- 常用接口：USB 转串口、SD 卡接口、以太网接口、MIPI接口、USB HOST、Audio、HDMI、Arduino
+- 调试接口，标准 JTAG/SWD
+
+开发板更多详细信息请参考 ST 官方文档 [STM32MP157A-DK1 开发板介绍](https://www.st.com/content/st_com/zh/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-discovery-kits/stm32mp157a-dk1.html)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设**   | **支持情况** |    **备注**     |
+| :------------- | :----------: | :-------------: |
+| USB 转串口     |     支持     |                 |
+| PMIC           |   暂不支持   | ST 电源管理 IC  |
+| 摄像头         |   暂不支持   |     OV5640      |
+| MFX            |   暂不支持   | ST 多功能拓展器 |
+| FMC            |   暂不支持   |   NAND FLASH    |
+| QSPI FLASH     |   暂不支持   |   MX25L51245G   |
+| OpenAMP        |   暂不支持   |    双核通讯     |
+| 低功耗电源管理 |   暂不支持   |                 |
+| SD卡           |   暂不支持   |     SDMMC1      |
+| eMMC           |   暂不支持   |     SDMMC2      |
+| 以太网         |   暂不支持   |  千兆以太网卡   |
+| 音频接口       |   暂不支持   |                 |
+| **片上外设**   | **支持情况** |    **备注**     |
+| GPIO           |     支持     |                 |
+| UART           |     支持     | UART4 (ST-Link) |
+| EXTI           |     支持     |                 |
+| SPI            |     支持     |                 |
+| TIM            |     支持     |                 |
+| LPTIM          |     支持     |                 |
+| I2C            |     支持     |      软件       |
+| ADC            |     支持     |                 |
+| DAC            |     支持     |                 |
+| WWDG           |     支持     |                 |
+| MDMA           |   暂不支持   |                 |
+| SPDIFRX        |   暂不支持   |                 |
+| DFSDM          |   暂不支持   |                 |
+| PWM            |   暂不支持   |                 |
+| FDCAN          |   暂不支持   |                 |
+| CRC            |   暂不支持   |                 |
+| RNG            |   暂不支持   |                 |
+| HASH           |   暂不支持   |                 |
+
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 ST-LINK 下载程序，在通过 ST-LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，橙色 LD4 会周期性闪烁。
+
+连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），可以看到 RT-Thread 的输出信息:
+
+> 注：正点原子开发板 在使用终端工具如：PuTTy、XShell 时，会出现系统不能启动的问题，推荐使用串口调试助手如：sscom
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     3.1.1 build Nov 19 2018
+ 2006 - 2018 Copyright by rt-thread team
+msh >
+```
+#### 驱动使用
+##### 1. DAC
+
+1. 在 bsp 下打开 env 工具；
+2. 输入`menuconfig`命令， 进入 Hardware Drivers config 打开 dac，保存并退出；
+3. 输入  `scons --target=iar` 命令重新生成工程；
+
+###### Finsh
+
+在使用设备前，需要先查找设备是否存在，可以使用命令 `dac probe` 后面跟注册的 DAC 设备的名称。如下所示：
+
+```c
+msh />dac probe dac1
+probe dac1 success
+```
+
+使能设备的某个通道可以使用命令 `dac enable` 后面跟通道号。
+
+```c
+msh />dac enable 1
+dac1 channel 1 enables success
+```
+
+设置 DAC 设备某个通道的数据可以使用命令 `dac write` 后面跟通道号。
+
+```c
+msh />dac write 1 1000
+dac1 channel 1 write value is 1000
+```
+
+关闭设备的某个通道可以使用命令 `dac disable` 后面跟通道号。
+
+```c
+msh />dac disable 1
+dac1 channel 1 disable success
+```
+
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口4 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
+
+## 注意事项
+
+1. 下载程序前，将开发板设置为 "Engineering Mode" 模式。 在 DK1 开发板上，将底下的BOOT开关设成 BOOT0=0，BOOT2=1状态，就进入"Engineering Mode"，如下图所示：
+
+   ​																<img src="figures\boot.png" alt="boot" style="zoom:50%;" />
+
+2. 再次烧写程序时，需要复位开发板。
+
+## 联系人信息
+
+维护人:
+
+- [liukang](https://github.com/thread-liu) 
+

bsp/stm32/stm32mp157a-st-ev1/SConscript

@@ -0,0 +1,15 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/stm32/stm32mp157a-st-ev1/SConstruct

@@ -0,0 +1,60 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+stm32_library = 'STM32MPxx_HAL'
+rtconfig.BSP_LIBRARY_TYPE = stm32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/stm32/stm32mp157a-st-ev1/applications/SConscript

@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/stm32/stm32mp157a-st-ev1/applications/main.c

@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-05     thread-liu   first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LD4 pin: PD8 */
+#define LED4_PIN    GET_PIN(D, 8)
+
+int main(void) 
+{
+    int count = 1;
+    /* set LD8 pin mode to output */
+    rt_pin_mode(LED4_PIN, PIN_MODE_OUTPUT);
+    
+    while (count++)
+    {
+        rt_pin_write(LED4_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);    
+        rt_pin_write(LED4_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+    
+    return RT_EOK;
+}

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/main.h

@@ -0,0 +1,77 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define STLINK_RX_Pin GPIO_PIN_11
+#define STLINK_RX_GPIO_Port GPIOG
+#define STLINK_TX_Pin GPIO_PIN_2
+#define STLINK_TX_GPIO_Port GPIOB
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h

@@ -0,0 +1,396 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32MP1xx_HAL_CONF_H
+#define STM32MP1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+#define HAL_ADC_MODULE_ENABLED
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+#define HAL_DAC_MODULE_ENABLED
+/*#define HAL_DCMI_MODULE_ENABLED   */
+/*#define HAL_DSI_MODULE_ENABLED   */
+/*#define HAL_DFSDM_MODULE_ENABLED   */
+/*#define HAL_DTS_MODULE_ENABLED   */
+/*#define HAL_ETH_MODULE_ENABLED   */
+/*#define HAL_FDCAN_MODULE_ENABLED   */
+/*#define HAL_HASH_MODULE_ENABLED   */
+/*#define HAL_HCD_MODULE_ENABLED   */
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/*#define HAL_I2S_MODULE_ENABLED   */
+#define HAL_IPCC_MODULE_ENABLED
+/*#define HAL_IWDG_MODULE_ENABLED   */
+#define HAL_LPTIM_MODULE_ENABLED
+/*#define HAL_LTDC_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+/*#define HAL_QSPI_MODULE_ENABLED   */
+/*#define HAL_RNG_MODULE_ENABLED   */
+/*#define HAL_SAI_MODULE_ENABLED   */
+/*#define HAL_SD_MODULE_ENABLED   */
+/*#define HAL_MMC_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_SPDIFRX_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_TAMP_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
+#define USE_HAL_UART_REGISTER_CALLBACKS   0u
+#define USE_HAL_USART_REGISTER_CALLBACKS  0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+#define HSE_VALUE    (24000000U) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (64000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 
+  *        Timeout value 
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT) 
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */  
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+  #define LSI_VALUE            32000U
+#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U /*!< tick interrupt priority (lowest by default) */
+                                                                /*  Warning: Must be set to higher priority for HAL_Delay()  */
+                                                                /*  and HAL_GetTick() usage under interrupt context          */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     0U
+#define  DATA_CACHE_ENABLE            0U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */ 
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32mp1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32mp1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+  #include "stm32mp1xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32mp1xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32mp1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+ #include "stm32mp1xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_hcd.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32mp1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32mp1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32mp1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32mp1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32mp1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32mp1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32mp1xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32mp1xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32mp1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32mp1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_TAMP_MODULE_ENABLED
+ #include "stm32mp1xx_hal_tamp.h"
+#endif /* HAL_TAMP_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32mp1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32mp1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32mp1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32mp1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */    
+    
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32MP1xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_it.h

@@ -0,0 +1,77 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32MP1xx_IT_H
+#define __STM32MP1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void WWDG1_IRQHandler(void);
+void LPTIM1_IRQHandler(void);
+void IPCC_RX1_IRQHandler(void);
+void IPCC_TX1_IRQHandler(void);
+void LPTIM2_IRQHandler(void);
+void LPTIM3_IRQHandler(void);
+void LPTIM4_IRQHandler(void);
+void LPTIM5_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32MP1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/main.c

@@ -0,0 +1,929 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc2;
+
+DAC_HandleTypeDef hdac1;
+
+IPCC_HandleTypeDef hipcc;
+
+LPTIM_HandleTypeDef hlptim1;
+LPTIM_HandleTypeDef hlptim2;
+LPTIM_HandleTypeDef hlptim3;
+LPTIM_HandleTypeDef hlptim4;
+LPTIM_HandleTypeDef hlptim5;
+
+SPI_HandleTypeDef hspi5;
+
+TIM_HandleTypeDef htim4;
+TIM_HandleTypeDef htim14;
+TIM_HandleTypeDef htim16;
+TIM_HandleTypeDef htim17;
+
+UART_HandleTypeDef huart4;
+UART_HandleTypeDef huart3;
+
+WWDG_HandleTypeDef hwwdg1;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+void PeriphCommonClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_IPCC_Init(void);
+static void MX_SPI5_Init(void);
+static void MX_TIM4_Init(void);
+static void MX_TIM14_Init(void);
+static void MX_TIM16_Init(void);
+static void MX_TIM17_Init(void);
+static void MX_UART4_Init(void);
+static void MX_ADC2_Init(void);
+static void MX_DAC1_Init(void);
+static void MX_LPTIM1_Init(void);
+static void MX_LPTIM2_Init(void);
+static void MX_LPTIM3_Init(void);
+static void MX_LPTIM4_Init(void);
+static void MX_LPTIM5_Init(void);
+static void MX_USART3_UART_Init(void);
+static void MX_WWDG1_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+    /* Configure the system clock */
+    SystemClock_Config();
+  }
+  
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+    /* Configure the peripherals common clocks */
+    PeriphCommonClock_Config();
+  }
+
+  /* IPCC initialisation */
+   MX_IPCC_Init();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_SPI5_Init();
+  MX_TIM4_Init();
+  MX_TIM14_Init();
+  MX_TIM16_Init();
+  MX_TIM17_Init();
+  MX_UART4_Init();
+  MX_ADC2_Init();
+  MX_DAC1_Init();
+  MX_LPTIM1_Init();
+  MX_LPTIM2_Init();
+  MX_LPTIM3_Init();
+  MX_LPTIM4_Init();
+  MX_LPTIM5_Init();
+  MX_USART3_UART_Init();
+  MX_WWDG1_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure LSE Drive Capability 
+  */
+  HAL_PWR_EnableBkUpAccess();
+  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMHIGH);
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
+                              |RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIG;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = 16;
+  RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL2.PLLSource = RCC_PLL12SOURCE_HSE;
+  RCC_OscInitStruct.PLL2.PLLM = 3;
+  RCC_OscInitStruct.PLL2.PLLN = 66;
+  RCC_OscInitStruct.PLL2.PLLP = 2;
+  RCC_OscInitStruct.PLL2.PLLQ = 1;
+  RCC_OscInitStruct.PLL2.PLLR = 1;
+  RCC_OscInitStruct.PLL2.PLLFRACV = 0x1400;
+  RCC_OscInitStruct.PLL2.PLLMODE = RCC_PLL_FRACTIONAL;
+  RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL3.PLLSource = RCC_PLL3SOURCE_HSE;
+  RCC_OscInitStruct.PLL3.PLLM = 2;
+  RCC_OscInitStruct.PLL3.PLLN = 34;
+  RCC_OscInitStruct.PLL3.PLLP = 2;
+  RCC_OscInitStruct.PLL3.PLLQ = 17;
+  RCC_OscInitStruct.PLL3.PLLR = 37;
+  RCC_OscInitStruct.PLL3.PLLRGE = RCC_PLL3IFRANGE_1;
+  RCC_OscInitStruct.PLL3.PLLFRACV = 6660;
+  RCC_OscInitStruct.PLL3.PLLMODE = RCC_PLL_FRACTIONAL;
+  RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** RCC Clock Config 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
+                              |RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
+                              |RCC_CLOCKTYPE_PCLK5;
+  RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_PLL2;
+  RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
+  RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_PLL3;
+  RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
+  RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV2;
+  RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV4;
+  RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV2;
+  RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV2;
+  RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Set the HSE division factor for RTC clock 
+  */
+  __HAL_RCC_RTC_HSEDIV(24);
+}
+
+/**
+  * @brief Peripherals Common Clock Configuration
+  * @retval None
+  */
+void PeriphCommonClock_Config(void)
+{
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the common periph clock 
+  */
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CKPER;
+  PeriphClkInit.CkperClockSelection = RCC_CKPERCLKSOURCE_HSE;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief ADC2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_ADC2_Init(void)
+{
+
+  /* USER CODE BEGIN ADC2_Init 0 */
+
+  /* USER CODE END ADC2_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC2_Init 1 */
+
+  /* USER CODE END ADC2_Init 1 */
+  /** Common config 
+  */
+  hadc2.Instance = ADC2;
+  hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2;
+  hadc2.Init.Resolution = ADC_RESOLUTION_16B;
+  hadc2.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  hadc2.Init.LowPowerAutoWait = DISABLE;
+  hadc2.Init.ContinuousConvMode = DISABLE;
+  hadc2.Init.NbrOfConversion = 1;
+  hadc2.Init.DiscontinuousConvMode = DISABLE;
+  hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc2.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR;
+  hadc2.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+  hadc2.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE;
+  hadc2.Init.OversamplingMode = DISABLE;
+  if (HAL_ADC_Init(&hadc2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_6;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
+  sConfig.SingleDiff = ADC_SINGLE_ENDED;
+  sConfig.OffsetNumber = ADC_OFFSET_NONE;
+  sConfig.Offset = 0;
+  if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC2_Init 2 */
+
+  /* USER CODE END ADC2_Init 2 */
+
+}
+
+/**
+  * @brief DAC1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_DAC1_Init(void)
+{
+
+  /* USER CODE BEGIN DAC1_Init 0 */
+
+  /* USER CODE END DAC1_Init 0 */
+
+  DAC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN DAC1_Init 1 */
+
+  /* USER CODE END DAC1_Init 1 */
+  /** DAC Initialization 
+  */
+  hdac1.Instance = DAC1;
+  if (HAL_DAC_Init(&hdac1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** DAC channel OUT1 config 
+  */
+  sConfig.DAC_HighFrequency = DAC_HIGH_FREQUENCY_INTERFACE_MODE_DISABLE;
+  sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
+  sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+  sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+  sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE;
+  sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
+  if (HAL_DAC_ConfigChannel(&hdac1, &sConfig, DAC_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN DAC1_Init 2 */
+
+  /* USER CODE END DAC1_Init 2 */
+
+}
+
+/**
+  * @brief IPCC Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_IPCC_Init(void)
+{
+
+  /* USER CODE BEGIN IPCC_Init 0 */
+
+  /* USER CODE END IPCC_Init 0 */
+
+  /* USER CODE BEGIN IPCC_Init 1 */
+
+  /* USER CODE END IPCC_Init 1 */
+  hipcc.Instance = IPCC;
+  if (HAL_IPCC_Init(&hipcc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN IPCC_Init 2 */
+
+  /* USER CODE END IPCC_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM1_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM1_Init 0 */
+
+  /* USER CODE END LPTIM1_Init 0 */
+
+  /* USER CODE BEGIN LPTIM1_Init 1 */
+
+  /* USER CODE END LPTIM1_Init 1 */
+  hlptim1.Instance = LPTIM1;
+  hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
+  hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+  if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM1_Init 2 */
+
+  /* USER CODE END LPTIM1_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM2_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM2_Init 0 */
+
+  /* USER CODE END LPTIM2_Init 0 */
+
+  /* USER CODE BEGIN LPTIM2_Init 1 */
+
+  /* USER CODE END LPTIM2_Init 1 */
+  hlptim2.Instance = LPTIM2;
+  hlptim2.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim2.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim2.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim2.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim2.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim2.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  hlptim2.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
+  hlptim2.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+  if (HAL_LPTIM_Init(&hlptim2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM2_Init 2 */
+
+  /* USER CODE END LPTIM2_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM3 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM3_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM3_Init 0 */
+
+  /* USER CODE END LPTIM3_Init 0 */
+
+  /* USER CODE BEGIN LPTIM3_Init 1 */
+
+  /* USER CODE END LPTIM3_Init 1 */
+  hlptim3.Instance = LPTIM3;
+  hlptim3.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim3.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim3.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim3.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim3.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim3.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  if (HAL_LPTIM_Init(&hlptim3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM3_Init 2 */
+
+  /* USER CODE END LPTIM3_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM4 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM4_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM4_Init 0 */
+
+  /* USER CODE END LPTIM4_Init 0 */
+
+  /* USER CODE BEGIN LPTIM4_Init 1 */
+
+  /* USER CODE END LPTIM4_Init 1 */
+  hlptim4.Instance = LPTIM4;
+  hlptim4.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim4.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim4.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim4.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim4.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim4.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  if (HAL_LPTIM_Init(&hlptim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM4_Init 2 */
+
+  /* USER CODE END LPTIM4_Init 2 */
+
+}
+
+/**
+  * @brief LPTIM5 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_LPTIM5_Init(void)
+{
+
+  /* USER CODE BEGIN LPTIM5_Init 0 */
+
+  /* USER CODE END LPTIM5_Init 0 */
+
+  /* USER CODE BEGIN LPTIM5_Init 1 */
+
+  /* USER CODE END LPTIM5_Init 1 */
+  hlptim5.Instance = LPTIM5;
+  hlptim5.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+  hlptim5.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+  hlptim5.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+  hlptim5.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+  hlptim5.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+  hlptim5.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+  if (HAL_LPTIM_Init(&hlptim5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN LPTIM5_Init 2 */
+
+  /* USER CODE END LPTIM5_Init 2 */
+
+}
+
+/**
+  * @brief SPI5 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SPI5_Init(void)
+{
+
+  /* USER CODE BEGIN SPI5_Init 0 */
+
+  /* USER CODE END SPI5_Init 0 */
+
+  /* USER CODE BEGIN SPI5_Init 1 */
+
+  /* USER CODE END SPI5_Init 1 */
+  /* SPI5 parameter configuration*/
+  hspi5.Instance = SPI5;
+  hspi5.Init.Mode = SPI_MODE_MASTER;
+  hspi5.Init.Direction = SPI_DIRECTION_2LINES_TXONLY;
+  hspi5.Init.DataSize = SPI_DATASIZE_4BIT;
+  hspi5.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi5.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi5.Init.NSS = SPI_NSS_SOFT;
+  hspi5.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
+  hspi5.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi5.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi5.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi5.Init.CRCPolynomial = 0x0;
+  hspi5.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+  hspi5.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
+  hspi5.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
+  hspi5.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
+  hspi5.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
+  hspi5.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
+  hspi5.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
+  hspi5.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
+  hspi5.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
+  hspi5.Init.IOSwap = SPI_IO_SWAP_DISABLE;
+  if (HAL_SPI_Init(&hspi5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI5_Init 2 */
+
+  /* USER CODE END SPI5_Init 2 */
+
+}
+
+/**
+  * @brief TIM4 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM4_Init(void)
+{
+
+  /* USER CODE BEGIN TIM4_Init 0 */
+
+  /* USER CODE END TIM4_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM4_Init 1 */
+
+  /* USER CODE END TIM4_Init 1 */
+  htim4.Instance = TIM4;
+  htim4.Init.Prescaler = 0;
+  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim4.Init.Period = 0;
+  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM4_Init 2 */
+
+  /* USER CODE END TIM4_Init 2 */
+  HAL_TIM_MspPostInit(&htim4);
+
+}
+
+/**
+  * @brief TIM14 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM14_Init(void)
+{
+
+  /* USER CODE BEGIN TIM14_Init 0 */
+
+  /* USER CODE END TIM14_Init 0 */
+
+  /* USER CODE BEGIN TIM14_Init 1 */
+
+  /* USER CODE END TIM14_Init 1 */
+  htim14.Instance = TIM14;
+  htim14.Init.Prescaler = 0;
+  htim14.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim14.Init.Period = 0;
+  htim14.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim14.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim14) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM14_Init 2 */
+
+  /* USER CODE END TIM14_Init 2 */
+
+}
+
+/**
+  * @brief TIM16 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM16_Init(void)
+{
+
+  /* USER CODE BEGIN TIM16_Init 0 */
+
+  /* USER CODE END TIM16_Init 0 */
+
+  /* USER CODE BEGIN TIM16_Init 1 */
+
+  /* USER CODE END TIM16_Init 1 */
+  htim16.Instance = TIM16;
+  htim16.Init.Prescaler = 0;
+  htim16.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim16.Init.Period = 0;
+  htim16.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim16.Init.RepetitionCounter = 0;
+  htim16.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim16) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM16_Init 2 */
+
+  /* USER CODE END TIM16_Init 2 */
+
+}
+
+/**
+  * @brief TIM17 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM17_Init(void)
+{
+
+  /* USER CODE BEGIN TIM17_Init 0 */
+
+  /* USER CODE END TIM17_Init 0 */
+
+  /* USER CODE BEGIN TIM17_Init 1 */
+
+  /* USER CODE END TIM17_Init 1 */
+  htim17.Instance = TIM17;
+  htim17.Init.Prescaler = 0;
+  htim17.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim17.Init.Period = 0;
+  htim17.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim17.Init.RepetitionCounter = 0;
+  htim17.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim17) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM17_Init 2 */
+
+  /* USER CODE END TIM17_Init 2 */
+
+}
+
+/**
+  * @brief UART4 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_UART4_Init(void)
+{
+
+  /* USER CODE BEGIN UART4_Init 0 */
+
+  /* USER CODE END UART4_Init 0 */
+
+  /* USER CODE BEGIN UART4_Init 1 */
+
+  /* USER CODE END UART4_Init 1 */
+  huart4.Instance = UART4;
+  huart4.Init.BaudRate = 115200;
+  huart4.Init.WordLength = UART_WORDLENGTH_8B;
+  huart4.Init.StopBits = UART_STOPBITS_1;
+  huart4.Init.Parity = UART_PARITY_NONE;
+  huart4.Init.Mode = UART_MODE_TX_RX;
+  huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart4.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart4.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart4.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+  huart4.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&huart4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetTxFifoThreshold(&huart4, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetRxFifoThreshold(&huart4, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_DisableFifoMode(&huart4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN UART4_Init 2 */
+
+  /* USER CODE END UART4_Init 2 */
+
+}
+
+/**
+  * @brief USART3 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART3_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART3_Init 0 */
+
+  /* USER CODE END USART3_Init 0 */
+
+  /* USER CODE BEGIN USART3_Init 1 */
+
+  /* USER CODE END USART3_Init 1 */
+  huart3.Instance = USART3;
+  huart3.Init.BaudRate = 115200;
+  huart3.Init.WordLength = UART_WORDLENGTH_8B;
+  huart3.Init.StopBits = UART_STOPBITS_1;
+  huart3.Init.Parity = UART_PARITY_NONE;
+  huart3.Init.Mode = UART_MODE_TX_RX;
+  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+  huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&huart3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART3_Init 2 */
+
+  /* USER CODE END USART3_Init 2 */
+
+}
+
+/**
+  * @brief WWDG1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_WWDG1_Init(void)
+{
+
+  /* USER CODE BEGIN WWDG1_Init 0 */
+
+  /* USER CODE END WWDG1_Init 0 */
+
+  /* USER CODE BEGIN WWDG1_Init 1 */
+
+  /* USER CODE END WWDG1_Init 1 */
+  hwwdg1.Instance = WWDG1;
+  hwwdg1.Init.Prescaler = WWDG_PRESCALER_8;
+  hwwdg1.Init.Window = 64;
+  hwwdg1.Init.Counter = 64;
+  hwwdg1.Init.EWIMode = WWDG_EWI_DISABLE;
+  if (HAL_WWDG_Init(&hwwdg1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN WWDG1_Init 2 */
+
+  /* USER CODE END WWDG1_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c

@@ -0,0 +1,987 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32mp1xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+#include "stpmic.h"
+#include "rtconfig.h"
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+                        
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+                    /**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_HSEM_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+#if defined(BSP_USING_ADC) || defined(BSP_USING_DAC)      
+    /* Configure PMIC */
+    BSP_PMIC_Init();
+    BSP_PMIC_InitRegulators();
+    
+    __HAL_RCC_VREF_CLK_ENABLE();
+    HAL_SYSCFG_VREFBUF_HighImpedanceConfig(SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE);
+    HAL_SYSCFG_EnableVREFBUF();
+#endif
+  }
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+  if(hadc->Instance==ADC2)
+  {
+  /* USER CODE BEGIN ADC2_MspInit 0 */
+
+  /* USER CODE END ADC2_MspInit 0 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+    PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PER;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_ADC12_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+    /**ADC2 GPIO Configuration    
+    PF14     ------> ADC2_INP6 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_14;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN ADC2_MspInit 1 */
+  /* USER CODE END ADC2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  if(hadc->Instance==ADC2)
+  {
+  /* USER CODE BEGIN ADC2_MspDeInit 0 */
+
+  /* USER CODE END ADC2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC12_CLK_DISABLE();
+  
+    /**ADC2 GPIO Configuration    
+    PF14     ------> ADC2_INP6 
+    */
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_14);
+
+  /* USER CODE BEGIN ADC2_MspDeInit 1 */
+
+  /* USER CODE END ADC2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief DAC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hdac: DAC handle pointer
+* @retval None
+*/
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hdac->Instance==DAC1)
+  {
+  /* USER CODE BEGIN DAC1_MspInit 0 */
+
+  /* USER CODE END DAC1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_DAC12_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**DAC1 GPIO Configuration    
+    PA4     ------> DAC1_OUT1 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_4;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN DAC1_MspInit 1 */
+
+  /* USER CODE END DAC1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief DAC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hdac: DAC handle pointer
+* @retval None
+*/
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
+{
+  if(hdac->Instance==DAC1)
+  {
+  /* USER CODE BEGIN DAC1_MspDeInit 0 */
+
+  /* USER CODE END DAC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_DAC12_CLK_DISABLE();
+  
+    /**DAC1 GPIO Configuration    
+    PA4     ------> DAC1_OUT1 
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
+
+  /* USER CODE BEGIN DAC1_MspDeInit 1 */
+
+  /* USER CODE END DAC1_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief IPCC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hipcc: IPCC handle pointer
+* @retval None
+*/
+void HAL_IPCC_MspInit(IPCC_HandleTypeDef* hipcc)
+{
+  if(hipcc->Instance==IPCC)
+  {
+  /* USER CODE BEGIN IPCC_MspInit 0 */
+
+  /* USER CODE END IPCC_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_IPCC_CLK_ENABLE();
+    /* IPCC interrupt Init */
+    HAL_NVIC_SetPriority(IPCC_RX1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(IPCC_RX1_IRQn);
+    HAL_NVIC_SetPriority(IPCC_TX1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(IPCC_TX1_IRQn);
+  /* USER CODE BEGIN IPCC_MspInit 1 */
+
+  /* USER CODE END IPCC_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief IPCC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hipcc: IPCC handle pointer
+* @retval None
+*/
+void HAL_IPCC_MspDeInit(IPCC_HandleTypeDef* hipcc)
+{
+  if(hipcc->Instance==IPCC)
+  {
+  /* USER CODE BEGIN IPCC_MspDeInit 0 */
+
+  /* USER CODE END IPCC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_IPCC_CLK_DISABLE();
+
+    /* IPCC interrupt DeInit */
+    HAL_NVIC_DisableIRQ(IPCC_RX1_IRQn);
+    HAL_NVIC_DisableIRQ(IPCC_TX1_IRQn);
+  /* USER CODE BEGIN IPCC_MspDeInit 1 */
+
+  /* USER CODE END IPCC_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief LPTIM MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
+{
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspInit 0 */
+
+  /* USER CODE END LPTIM1_MspInit 0 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
+    PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK1;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM1_CLK_ENABLE();
+    /* LPTIM1 interrupt Init */
+    HAL_NVIC_SetPriority(LPTIM1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(LPTIM1_IRQn);
+  /* USER CODE BEGIN LPTIM1_MspInit 1 */
+
+  /* USER CODE END LPTIM1_MspInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM2)
+  {
+  /* USER CODE BEGIN LPTIM2_MspInit 0 */
+
+  /* USER CODE END LPTIM2_MspInit 0 */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
+    PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM2_CLK_ENABLE();
+    /* LPTIM2 interrupt Init */
+    HAL_NVIC_SetPriority(LPTIM2_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(LPTIM2_IRQn);
+  /* USER CODE BEGIN LPTIM2_MspInit 1 */
+
+  /* USER CODE END LPTIM2_MspInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM3)
+  {
+  /* USER CODE BEGIN LPTIM3_MspInit 0 */
+
+  /* USER CODE END LPTIM3_MspInit 0 */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
+    PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM3_CLK_ENABLE();
+    /* LPTIM3 interrupt Init */
+    HAL_NVIC_SetPriority(LPTIM3_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(LPTIM3_IRQn);
+  /* USER CODE BEGIN LPTIM3_MspInit 1 */
+
+  /* USER CODE END LPTIM3_MspInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM4)
+  {
+  /* USER CODE BEGIN LPTIM4_MspInit 0 */
+
+  /* USER CODE END LPTIM4_MspInit 0 */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
+    PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM4_CLK_ENABLE();
+    /* LPTIM4 interrupt Init */
+    HAL_NVIC_SetPriority(LPTIM4_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(LPTIM4_IRQn);
+  /* USER CODE BEGIN LPTIM4_MspInit 1 */
+
+  /* USER CODE END LPTIM4_MspInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM5)
+  {
+  /* USER CODE BEGIN LPTIM5_MspInit 0 */
+
+  /* USER CODE END LPTIM5_MspInit 0 */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
+    PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_LPTIM5_CLK_ENABLE();
+    /* LPTIM5 interrupt Init */
+    HAL_NVIC_SetPriority(LPTIM5_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(LPTIM5_IRQn);
+  /* USER CODE BEGIN LPTIM5_MspInit 1 */
+
+  /* USER CODE END LPTIM5_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief LPTIM MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hlptim: LPTIM handle pointer
+* @retval None
+*/
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim)
+{
+  if(hlptim->Instance==LPTIM1)
+  {
+  /* USER CODE BEGIN LPTIM1_MspDeInit 0 */
+
+  /* USER CODE END LPTIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM1_CLK_DISABLE();
+
+    /* LPTIM1 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(LPTIM1_IRQn);
+  /* USER CODE BEGIN LPTIM1_MspDeInit 1 */
+
+  /* USER CODE END LPTIM1_MspDeInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM2)
+  {
+  /* USER CODE BEGIN LPTIM2_MspDeInit 0 */
+
+  /* USER CODE END LPTIM2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM2_CLK_DISABLE();
+
+    /* LPTIM2 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(LPTIM2_IRQn);
+  /* USER CODE BEGIN LPTIM2_MspDeInit 1 */
+
+  /* USER CODE END LPTIM2_MspDeInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM3)
+  {
+  /* USER CODE BEGIN LPTIM3_MspDeInit 0 */
+
+  /* USER CODE END LPTIM3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM3_CLK_DISABLE();
+
+    /* LPTIM3 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(LPTIM3_IRQn);
+  /* USER CODE BEGIN LPTIM3_MspDeInit 1 */
+
+  /* USER CODE END LPTIM3_MspDeInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM4)
+  {
+  /* USER CODE BEGIN LPTIM4_MspDeInit 0 */
+
+  /* USER CODE END LPTIM4_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM4_CLK_DISABLE();
+
+    /* LPTIM4 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(LPTIM4_IRQn);
+  /* USER CODE BEGIN LPTIM4_MspDeInit 1 */
+
+  /* USER CODE END LPTIM4_MspDeInit 1 */
+  }
+  else if(hlptim->Instance==LPTIM5)
+  {
+  /* USER CODE BEGIN LPTIM5_MspDeInit 0 */
+
+  /* USER CODE END LPTIM5_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPTIM5_CLK_DISABLE();
+
+    /* LPTIM5 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(LPTIM5_IRQn);
+  /* USER CODE BEGIN LPTIM5_MspDeInit 1 */
+
+  /* USER CODE END LPTIM5_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+  if(hspi->Instance==SPI5)
+  {
+  /* USER CODE BEGIN SPI5_MspInit 0 */
+
+  /* USER CODE END SPI5_MspInit 0 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SPI45;
+    PeriphClkInit.Spi45ClockSelection = RCC_SPI45CLKSOURCE_PCLK2;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_SPI5_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+    /**SPI5 GPIO Configuration    
+    PF9     ------> SPI5_MOSI
+    PF7     ------> SPI5_SCK 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_7;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI5;
+    HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI5_MspInit 1 */
+
+  /* USER CODE END SPI5_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+  if(hspi->Instance==SPI5)
+  {
+  /* USER CODE BEGIN SPI5_MspDeInit 0 */
+
+  /* USER CODE END SPI5_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI5_CLK_DISABLE();
+  
+    /**SPI5 GPIO Configuration    
+    PF9     ------> SPI5_MOSI
+    PF7     ------> SPI5_SCK 
+    */
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_9|GPIO_PIN_7);
+
+  /* USER CODE BEGIN SPI5_MspDeInit 1 */
+
+  /* USER CODE END SPI5_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspInit 0 */
+
+  /* USER CODE END TIM4_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM4_CLK_ENABLE();
+  /* USER CODE BEGIN TIM4_MspInit 1 */
+
+  /* USER CODE END TIM4_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM14)
+  {
+  /* USER CODE BEGIN TIM14_MspInit 0 */
+
+  /* USER CODE END TIM14_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM14_CLK_ENABLE();
+  /* USER CODE BEGIN TIM14_MspInit 1 */
+
+  /* USER CODE END TIM14_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM16)
+  {
+  /* USER CODE BEGIN TIM16_MspInit 0 */
+
+  /* USER CODE END TIM16_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM16_CLK_ENABLE();
+  /* USER CODE BEGIN TIM16_MspInit 1 */
+
+  /* USER CODE END TIM16_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM17)
+  {
+  /* USER CODE BEGIN TIM17_MspInit 0 */
+
+  /* USER CODE END TIM17_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM17_CLK_ENABLE();
+  /* USER CODE BEGIN TIM17_MspInit 1 */
+
+  /* USER CODE END TIM17_MspInit 1 */
+  }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(htim->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspPostInit 0 */
+
+  /* USER CODE END TIM4_MspPostInit 0 */
+  
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    /**TIM4 GPIO Configuration    
+    PD13     ------> TIM4_CH2 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_13;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM4_MspPostInit 1 */
+
+  /* USER CODE END TIM4_MspPostInit 1 */
+  }
+
+}
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspDeInit 0 */
+
+  /* USER CODE END TIM4_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM4_CLK_DISABLE();
+  /* USER CODE BEGIN TIM4_MspDeInit 1 */
+
+  /* USER CODE END TIM4_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM14)
+  {
+  /* USER CODE BEGIN TIM14_MspDeInit 0 */
+
+  /* USER CODE END TIM14_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM14_CLK_DISABLE();
+  /* USER CODE BEGIN TIM14_MspDeInit 1 */
+
+  /* USER CODE END TIM14_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM16)
+  {
+  /* USER CODE BEGIN TIM16_MspDeInit 0 */
+
+  /* USER CODE END TIM16_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM16_CLK_DISABLE();
+  /* USER CODE BEGIN TIM16_MspDeInit 1 */
+
+  /* USER CODE END TIM16_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM17)
+  {
+  /* USER CODE BEGIN TIM17_MspDeInit 0 */
+
+  /* USER CODE END TIM17_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM17_CLK_DISABLE();
+  /* USER CODE BEGIN TIM17_MspDeInit 1 */
+
+  /* USER CODE END TIM17_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+  if(huart->Instance==UART4)
+  {
+  /* USER CODE BEGIN UART4_MspInit 0 */
+
+  /* USER CODE END UART4_MspInit 0 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART24;
+    PeriphClkInit.Uart24ClockSelection = RCC_UART24CLKSOURCE_HSI;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_UART4_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOG_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**UART4 GPIO Configuration    
+    PG11     ------> UART4_TX
+    PB2     ------> UART4_RX 
+    */
+    GPIO_InitStruct.Pin = STLINK_RX_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF6_UART4;
+    HAL_GPIO_Init(STLINK_RX_GPIO_Port, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = STLINK_TX_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
+    HAL_GPIO_Init(STLINK_TX_GPIO_Port, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN UART4_MspInit 1 */
+
+  /* USER CODE END UART4_MspInit 1 */
+  }
+  else if(huart->Instance==USART3)
+  {
+  /* USER CODE BEGIN USART3_MspInit 0 */
+
+  /* USER CODE END USART3_MspInit 0 */
+
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART35;
+    PeriphClkInit.Uart35ClockSelection = RCC_UART35CLKSOURCE_PCLK1;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_USART3_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**USART3 GPIO Configuration    
+    PB10     ------> USART3_TX
+    PB12     ------> USART3_RX 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_12;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF8_USART3;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART3_MspInit 1 */
+
+  /* USER CODE END USART3_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if(huart->Instance==UART4)
+  {
+  /* USER CODE BEGIN UART4_MspDeInit 0 */
+
+  /* USER CODE END UART4_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_UART4_CLK_DISABLE();
+  
+    /**UART4 GPIO Configuration    
+    PG11     ------> UART4_TX
+    PB2     ------> UART4_RX 
+    */
+    HAL_GPIO_DeInit(STLINK_RX_GPIO_Port, STLINK_RX_Pin);
+
+    HAL_GPIO_DeInit(STLINK_TX_GPIO_Port, STLINK_TX_Pin);
+
+  /* USER CODE BEGIN UART4_MspDeInit 1 */
+
+  /* USER CODE END UART4_MspDeInit 1 */
+  }
+  else if(huart->Instance==USART3)
+  {
+  /* USER CODE BEGIN USART3_MspDeInit 0 */
+
+  /* USER CODE END USART3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART3_CLK_DISABLE();
+  
+    /**USART3 GPIO Configuration    
+    PB10     ------> USART3_TX
+    PB12     ------> USART3_RX 
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_12);
+
+  /* USER CODE BEGIN USART3_MspDeInit 1 */
+
+  /* USER CODE END USART3_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief WWDG MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hwwdg: WWDG handle pointer
+* @retval None
+*/
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef* hwwdg)
+{
+  if(hwwdg->Instance==WWDG1)
+  {
+  /* USER CODE BEGIN WWDG1_MspInit 0 */
+
+  /* USER CODE END WWDG1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_WWDG1_CLK_ENABLE();
+    /* WWDG1 interrupt Init */
+    HAL_NVIC_SetPriority(WWDG1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(WWDG1_IRQn);
+  /* USER CODE BEGIN WWDG1_MspInit 1 */
+
+  /* USER CODE END WWDG1_MspInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+/**
+  * @brief  Initializes I2C MSP.
+  * @param  hI2c : I2C handler
+  * @retval None
+  */
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
+{
+    GPIO_InitTypeDef  GPIO_InitStruct = {0};
+    RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+    
+    if(hI2c->Instance == I2C4)
+    {
+        if(IS_ENGINEERING_BOOT_MODE())
+        {
+             /*** Configure the I2C peripheral clock ***/ 
+            PeriphClkInit.I2c46ClockSelection = RCC_I2C46CLKSOURCE_HSI;
+            PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C46;
+            if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+            {
+              Error_Handler();
+            }
+        }
+
+        /* Enable GPIO clock */
+        __HAL_RCC_GPIOZ_CLK_ENABLE();
+
+        /* Configure I2C Tx/RX as alternate function */
+        GPIO_InitStruct.Pin       = GPIO_PIN_4 | GPIO_PIN_5;
+        GPIO_InitStruct.Mode      = GPIO_MODE_AF_OD;
+        GPIO_InitStruct.Pull      = GPIO_NOPULL;
+        GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF6_I2C4;
+        HAL_GPIO_Init(GPIOZ, &GPIO_InitStruct);
+
+        /* Enable I2C clock */
+        __HAL_RCC_I2C4_CLK_ENABLE();
+        /* Force the I2C peripheral clock reset */  
+        __HAL_RCC_I2C4_FORCE_RESET();
+        /* Release the I2C peripheral clock reset */  
+        __HAL_RCC_I2C4_RELEASE_RESET();
+        
+        HAL_NVIC_SetPriority(I2C4_ER_IRQn, 0, 1);
+        HAL_NVIC_EnableIRQ(I2C4_ER_IRQn);
+        HAL_NVIC_SetPriority(I2C4_EV_IRQn, 0, 2);
+        HAL_NVIC_EnableIRQ(I2C4_EV_IRQn);
+    }
+}
+
+/**
+  * @brief  DeInitializes I2C MSP.
+  * @param  hI2c : I2C handler
+  * @retval None
+  */
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hI2c)
+{
+    GPIO_InitTypeDef  GPIO_InitStruct = {0};
+    
+    if(hI2c->Instance == I2C4)
+    {
+        /* Configure I2C Tx, Rx as alternate function */
+        GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_5;
+        HAL_GPIO_DeInit(GPIOZ, GPIO_InitStruct.Pin);
+
+        /* Disable I2C clock */
+        __HAL_RCC_I2C4_CLK_DISABLE();
+
+        /* Disable NVIC for I2C */
+        HAL_NVIC_DisableIRQ(I2C4_ER_IRQn);
+        HAL_NVIC_DisableIRQ(I2C4_EV_IRQn);
+    }
+}
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_it.c

@@ -0,0 +1,321 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32mp1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32mp1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern IPCC_HandleTypeDef hipcc;
+extern LPTIM_HandleTypeDef hlptim1;
+extern LPTIM_HandleTypeDef hlptim2;
+extern LPTIM_HandleTypeDef hlptim3;
+extern LPTIM_HandleTypeDef hlptim4;
+extern LPTIM_HandleTypeDef hlptim5;
+extern WWDG_HandleTypeDef hwwdg1;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32MP1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32mp1xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles Window watchdog interrupt.
+  */
+void WWDG1_IRQHandler(void)
+{
+  /* USER CODE BEGIN WWDG1_IRQn 0 */
+
+  /* USER CODE END WWDG1_IRQn 0 */
+  HAL_WWDG_IRQHandler(&hwwdg1);
+  /* USER CODE BEGIN WWDG1_IRQn 1 */
+
+  /* USER CODE END WWDG1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM1 global interrupt.
+  */
+void LPTIM1_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM1_IRQn 0 */
+
+  /* USER CODE END LPTIM1_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim1);
+  /* USER CODE BEGIN LPTIM1_IRQn 1 */
+
+  /* USER CODE END LPTIM1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles IPCC RX1 occupied interrupt.
+  */
+void IPCC_RX1_IRQHandler(void)
+{
+  /* USER CODE BEGIN IPCC_RX1_IRQn 0 */
+
+  /* USER CODE END IPCC_RX1_IRQn 0 */
+  HAL_IPCC_RX_IRQHandler(&hipcc);
+  /* USER CODE BEGIN IPCC_RX1_IRQn 1 */
+
+  /* USER CODE END IPCC_RX1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles IPCC TX1 free interrupt.
+  */
+void IPCC_TX1_IRQHandler(void)
+{
+  /* USER CODE BEGIN IPCC_TX1_IRQn 0 */
+
+  /* USER CODE END IPCC_TX1_IRQn 0 */
+  HAL_IPCC_TX_IRQHandler(&hipcc);
+  /* USER CODE BEGIN IPCC_TX1_IRQn 1 */
+
+  /* USER CODE END IPCC_TX1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM2 global interrupt.
+  */
+void LPTIM2_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM2_IRQn 0 */
+
+  /* USER CODE END LPTIM2_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim2);
+  /* USER CODE BEGIN LPTIM2_IRQn 1 */
+
+  /* USER CODE END LPTIM2_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM3 global interrupt.
+  */
+void LPTIM3_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM3_IRQn 0 */
+
+  /* USER CODE END LPTIM3_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim3);
+  /* USER CODE BEGIN LPTIM3_IRQn 1 */
+
+  /* USER CODE END LPTIM3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM4 global interrupt.
+  */
+void LPTIM4_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM4_IRQn 0 */
+
+  /* USER CODE END LPTIM4_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim4);
+  /* USER CODE BEGIN LPTIM4_IRQn 1 */
+
+  /* USER CODE END LPTIM4_IRQn 1 */
+}
+
+/**
+  * @brief This function handles LPTIM5 global interrupt.
+  */
+void LPTIM5_IRQHandler(void)
+{
+  /* USER CODE BEGIN LPTIM5_IRQn 0 */
+
+  /* USER CODE END LPTIM5_IRQn 0 */
+  HAL_LPTIM_IRQHandler(&hlptim5);
+  /* USER CODE BEGIN LPTIM5_IRQn 1 */
+
+  /* USER CODE END LPTIM5_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/Common/System/system_stm32mp1xx.c

@@ -0,0 +1,290 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32mp1xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32mp1xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock frequency, it can
+  *                                  be used by the user application to setup
+  *                                  the SysTick timer or configure other
+  *                                  parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  *
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32mp1xx_system
+  * @{
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32mp1xx_hal.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Defines
+  * @{
+  */
+
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on EVAL board as data memory  */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x400. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) each time HAL_RCC_ClockConfig() is called to configure the system clock
+         frequency
+         Note: If you use this function to configure the system clock;
+               then there is no need to call the first functions listed above,
+               since SystemCoreClock variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = HSI_VALUE;
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) 
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32MP1xx_System_Private_Functions
+  * @{
+  */
+
+  /**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+#if defined (CORE_CM4)
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+   SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#if defined (VECT_TAB_SRAM)
+  SCB->VTOR = MCU_AHB_SRAM | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif
+  /* Disable all interrupts and events */
+  CLEAR_REG(EXTI_C2->IMR1);
+  CLEAR_REG(EXTI_C2->IMR2);
+  CLEAR_REG(EXTI_C2->IMR3);
+  CLEAR_REG(EXTI_C2->EMR1);
+  CLEAR_REG(EXTI_C2->EMR2);
+  CLEAR_REG(EXTI_C2->EMR3);
+#else
+#error Please #define CORE_CM4
+#endif	                         
+}
+
+/**
+   * @brief Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock frequency (Hz),
+  *         it can be used by the user application to setup the SysTick timer or
+  *         configure other parameters.
+  *
+  * @note   Each time the core clock changes, this function must be called to
+  *         update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the
+  *             HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the
+  *             HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is CSI, SystemCoreClock will contain the
+  *             CSI_VALUE(***)
+  *
+  *           - If SYSCLK source is PLL3_P, SystemCoreClock will contain the
+  *             HSI_VALUE(*) or the HSE_VALUE(*) or the CSI_VALUE(***)
+  *             multiplied/divided by the PLL3 factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *             (default value 64 MHz) but the real value may vary depending
+  *             on the variations in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *              (default value 24 MHz), user has to ensure that HSE_VALUE is
+  *              same as the real frequency of the crystal used. Otherwise, this
+  *              function may have wrong result.
+  *
+  *         (***) CSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file
+  *              (default value 4 MHz)but the real value may vary depending
+  *              on the variations in voltage and temperature.
+  *
+  *         - The result of this function could be not correct when using
+  *           fractional value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t   pllsource, pll3m, pll3fracen;
+  float fracn1, pll3vco;
+
+  switch (RCC->MSSCKSELR & RCC_MSSCKSELR_MCUSSRC)
+  {
+  case 0x00:  /* HSI used as system clock source */
+    SystemCoreClock = (HSI_VALUE >> (RCC->HSICFGR & RCC_HSICFGR_HSIDIV));
+    break;
+
+  case 0x01:  /* HSE used as system clock source */
+    SystemCoreClock = HSE_VALUE;
+    break;
+
+  case 0x02:  /* CSI used as system clock source */
+    SystemCoreClock = CSI_VALUE;
+    break;
+
+  case 0x03:  /* PLL3_P used as system clock source */
+    pllsource = (RCC->RCK3SELR & RCC_RCK3SELR_PLL3SRC);
+    pll3m = ((RCC->PLL3CFGR1 & RCC_PLL3CFGR1_DIVM3) >> RCC_PLL3CFGR1_DIVM3_Pos) + 1U;
+    pll3fracen = (RCC->PLL3FRACR & RCC_PLL3FRACR_FRACLE) >> 16U;
+    fracn1 = (float)(pll3fracen * ((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACV) >> 3U));
+    pll3vco = (float)((float)((RCC->PLL3CFGR1 & RCC_PLL3CFGR1_DIVN) + 1U) + (fracn1 / (float) 0x1FFF));
+
+    if (pll3m != 0U)
+    {
+      switch (pllsource)
+      {
+        case 0x00:  /* HSI used as PLL clock source */
+          pll3vco *= (float)((HSI_VALUE >> (RCC->HSICFGR & RCC_HSICFGR_HSIDIV)) / pll3m);
+          break;
+
+        case 0x01:  /* HSE used as PLL clock source */
+          pll3vco *= (float)(HSE_VALUE / pll3m);
+          break;
+
+        case 0x02:  /* CSI used as PLL clock source */
+          pll3vco *= (float)(CSI_VALUE / pll3m);
+          break;
+
+        case 0x03:  /* No clock source for PLL */
+          pll3vco = 0;
+          break;
+       }
+      SystemCoreClock = (uint32_t)(pll3vco/ ((float)((RCC->PLL3CFGR2 & RCC_PLL3CFGR2_DIVP) + 1U)));
+    }
+    else
+    {
+      SystemCoreClock = 0U;
+    }
+    break;
+  }
+
+  /* Compute mcu_ck */
+  SystemCoreClock = SystemCoreClock >> (RCC->MCUDIVR & RCC_MCUDIVR_MCUDIV);
+}
+
+
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32mp15xx.s before jump to main.
+  *         This function configures the external SRAM mounted on Eval boards
+  *         This SRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  
+}
+#endif /* DATA_IN_ExtSRAM */
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/STM32MP157-DK1.ioc

@@ -0,0 +1,857 @@
+#MicroXplorer Configuration settings - do not modify
+ADC2.Channel-2\#ChannelRegularConversion=ADC_CHANNEL_6
+ADC2.ClockPrescaler=ADC_CLOCK_ASYNC_DIV2
+ADC2.IPParameters=Rank-2\#ChannelRegularConversion,Channel-2\#ChannelRegularConversion,SamplingTime-2\#ChannelRegularConversion,OffsetNumber-2\#ChannelRegularConversion,NbrOfConversionFlag,Resolution,ClockPrescaler
+ADC2.NbrOfConversionFlag=1
+ADC2.OffsetNumber-2\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC2.Rank-2\#ChannelRegularConversion=1
+ADC2.Resolution=ADC_RESOLUTION_16B
+ADC2.SamplingTime-2\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+BootLoader.IPs=RCC,DDR
+BootROM.IPs=RCC
+CortexA7NS.IPs=DDR\:I,RCC\:I,RTC\:I,BSEC,ETZPC,GIC,TAMP\:I,DMA\:I,PWR,SPI2\:I,I2S2\:I,IPCC\:I,TIM3\:I,VREFBUF\:I,SAI4\:I,HSEM\:I,RNG1,DMA1\:I,MDMA_A7NS\:I
+CortexA7S.IPs=BSEC\:I,ETZPC\:I,GIC\:I,RCC,PWR\:I,RNG1\:I,RTC,DDR,HSEM,TAMP,MDMA_A7S\:I
+CortexM4.IPs=IPCC,HSEM,RCC,NVIC\:I,ETZPC,FREERTOS\:I,DMA,PWR,SYS\:I,TIM4\:I,TIM14\:I,TIM16\:I,TIM17\:I,SPI5\:I,UART4\:I,UART5\:I,USART2\:I,ADC1\:I,ADC2\:I,USART3\:I,DAC1\:I,WWDG1\:I,LPTIM1\:I,LPTIM2\:I,LPTIM3\:I,LPTIM4\:I,LPTIM5\:I,DMA2\:I
+DDR.ADDRMAP1=0x00070707
+DDR.ADDRMAP3=0x1F000000
+DDR.ADDRMAP5=0x06060606
+DDR.ADDRMAP6=0x0F060606
+DDR.DDR_Frequency=533.0
+DDR.DFITMG0=0x02060105
+DDR.IPParameters=DDR_Frequency,RL,addrmap_col_b9,addrmap_col_b10,addrmap_col_b11,addrmap_bank_b0,addrmap_bank_b1,addrmap_bank_b2,addrmap_row_b0,addrmap_row_b1,addrmap_row_b2_10,addrmap_row_b11,addrmap_row_b12,addrmap_row_b13,addrmap_row_b14,addrmap_row_b15,MSTR,DFITMG0,SCHED,ADDRMAP1,ADDRMAP3,ADDRMAP5,ADDRMAP6
+DDR.MSTR=0x00041401
+DDR.RL=8
+DDR.SCHED=0x00000C01
+DDR.addrmap_bank_b0=7
+DDR.addrmap_bank_b1=7
+DDR.addrmap_bank_b2=7
+DDR.addrmap_col_b10=31
+DDR.addrmap_col_b11=31
+DDR.addrmap_col_b9=31
+DDR.addrmap_row_b0=6
+DDR.addrmap_row_b1=6
+DDR.addrmap_row_b11=6
+DDR.addrmap_row_b12=6
+DDR.addrmap_row_b13=6
+DDR.addrmap_row_b14=6
+DDR.addrmap_row_b15=15
+DDR.addrmap_row_b2_10=6
+DDR_A0.GPIOParameters=GPIO_Label
+DDR_A0.GPIO_Label=DDR_A0 [MT41K256M16TW_A0]
+DDR_A0.Locked=true
+DDR_A0.Mode=DDR3
+DDR_A0.Signal=DDR_A0
+DDR_A1.GPIOParameters=GPIO_Label
+DDR_A1.GPIO_Label=DDR_A1 [MT41K256M16TW_A1]
+DDR_A1.Locked=true
+DDR_A1.Mode=DDR3
+DDR_A1.Signal=DDR_A1
+DDR_A10.GPIOParameters=GPIO_Label
+DDR_A10.GPIO_Label=DDR_A10 [MT41K256M16TW_A10]
+DDR_A10.Locked=true
+DDR_A10.Mode=DDR3
+DDR_A10.Signal=DDR_A10
+DDR_A11.GPIOParameters=GPIO_Label
+DDR_A11.GPIO_Label=DDR_A11 [MT41K256M16TW_A11]
+DDR_A11.Locked=true
+DDR_A11.Mode=DDR3
+DDR_A11.Signal=DDR_A11
+DDR_A12.GPIOParameters=GPIO_Label
+DDR_A12.GPIO_Label=DDR_A12 [MT41K256M16TW_A12]
+DDR_A12.Locked=true
+DDR_A12.Mode=4Gb_16bits
+DDR_A12.Signal=DDR_A12
+DDR_A13.GPIOParameters=GPIO_Label
+DDR_A13.GPIO_Label=DDR_A13 [MT41K256M16TW_A13]
+DDR_A13.Locked=true
+DDR_A13.Mode=4Gb_16bits
+DDR_A13.Signal=DDR_A13
+DDR_A14.GPIOParameters=GPIO_Label
+DDR_A14.GPIO_Label=DDR_A14 [MT41K256M16TW_A14]
+DDR_A14.Locked=true
+DDR_A14.Mode=4Gb_16bits
+DDR_A14.Signal=DDR_A14
+DDR_A2.GPIOParameters=GPIO_Label
+DDR_A2.GPIO_Label=DDR_A2 [MT41K256M16TW_A2]
+DDR_A2.Locked=true
+DDR_A2.Mode=DDR3
+DDR_A2.Signal=DDR_A2
+DDR_A3.GPIOParameters=GPIO_Label
+DDR_A3.GPIO_Label=DDR_A3 [MT41K256M16TW_A3]
+DDR_A3.Locked=true
+DDR_A3.Mode=DDR3
+DDR_A3.Signal=DDR_A3
+DDR_A4.GPIOParameters=GPIO_Label
+DDR_A4.GPIO_Label=DDR_A4 [MT41K256M16TW_A4]
+DDR_A4.Locked=true
+DDR_A4.Mode=DDR3
+DDR_A4.Signal=DDR_A4
+DDR_A5.GPIOParameters=GPIO_Label
+DDR_A5.GPIO_Label=DDR_A5 [MT41K256M16TW_A5]
+DDR_A5.Locked=true
+DDR_A5.Mode=DDR3
+DDR_A5.Signal=DDR_A5
+DDR_A6.GPIOParameters=GPIO_Label
+DDR_A6.GPIO_Label=DDR_A6 [MT41K256M16TW_A6]
+DDR_A6.Locked=true
+DDR_A6.Mode=DDR3
+DDR_A6.Signal=DDR_A6
+DDR_A7.GPIOParameters=GPIO_Label
+DDR_A7.GPIO_Label=DDR_A7 [MT41K256M16TW_A7]
+DDR_A7.Locked=true
+DDR_A7.Mode=DDR3
+DDR_A7.Signal=DDR_A7
+DDR_A8.GPIOParameters=GPIO_Label
+DDR_A8.GPIO_Label=DDR_A8 [MT41K256M16TW_A8]
+DDR_A8.Locked=true
+DDR_A8.Mode=DDR3
+DDR_A8.Signal=DDR_A8
+DDR_A9.GPIOParameters=GPIO_Label
+DDR_A9.GPIO_Label=DDR_A9 [MT41K256M16TW_A9]
+DDR_A9.Locked=true
+DDR_A9.Mode=DDR3
+DDR_A9.Signal=DDR_A9
+DDR_ATO.GPIOParameters=GPIO_Label
+DDR_ATO.GPIO_Label=DDR_ATO
+DDR_ATO.Locked=true
+DDR_ATO.Mode=DDR3
+DDR_ATO.Signal=DDR_ATO
+DDR_BA0.GPIOParameters=GPIO_Label
+DDR_BA0.GPIO_Label=DDR_BA0 [MT41K256M16TW_BA0]
+DDR_BA0.Locked=true
+DDR_BA0.Mode=DDR3
+DDR_BA0.Signal=DDR_BA0
+DDR_BA1.GPIOParameters=GPIO_Label
+DDR_BA1.GPIO_Label=DDR_BA1 [MT41K256M16TW_BA1]
+DDR_BA1.Locked=true
+DDR_BA1.Mode=DDR3
+DDR_BA1.Signal=DDR_BA1
+DDR_BA2.GPIOParameters=GPIO_Label
+DDR_BA2.GPIO_Label=DDR_BA2 [MT41K256M16TW_BA2]
+DDR_BA2.Locked=true
+DDR_BA2.Mode=DDR3
+DDR_BA2.Signal=DDR_BA2
+DDR_CASN.GPIOParameters=GPIO_Label
+DDR_CASN.GPIO_Label=DDR_CASN [MT41K256M16TW_CAS\#]
+DDR_CASN.Locked=true
+DDR_CASN.Mode=DDR3
+DDR_CASN.Signal=DDR_CASN
+DDR_CKE.GPIOParameters=GPIO_Label
+DDR_CKE.GPIO_Label=DDR_CKE [MT41K256M16TW_CKE]
+DDR_CKE.Locked=true
+DDR_CKE.Mode=DDR3
+DDR_CKE.Signal=DDR_CKE
+DDR_CLKN.GPIOParameters=GPIO_Label
+DDR_CLKN.GPIO_Label=DDR_CLK_N [MT41K256M16TW_CK\#]
+DDR_CLKN.Locked=true
+DDR_CLKN.Mode=DDR3
+DDR_CLKN.Signal=DDR_CLKN
+DDR_CLKP.GPIOParameters=GPIO_Label
+DDR_CLKP.GPIO_Label=DDR_CLK_P [MT41K256M16TW_CK]
+DDR_CLKP.Locked=true
+DDR_CLKP.Mode=DDR3
+DDR_CLKP.Signal=DDR_CLKP
+DDR_CSN.GPIOParameters=GPIO_Label
+DDR_CSN.GPIO_Label=DDR_CSN [MT41K256M16TW_CS\#]
+DDR_CSN.Locked=true
+DDR_CSN.Mode=DDR3
+DDR_CSN.Signal=DDR_CSN
+DDR_DQ0.GPIOParameters=GPIO_Label
+DDR_DQ0.GPIO_Label=DDR_DQ0 [MT41K256M16TW_DQU5]
+DDR_DQ0.Locked=true
+DDR_DQ0.Mode=DDR3
+DDR_DQ0.Signal=DDR_DQ0
+DDR_DQ1.GPIOParameters=GPIO_Label
+DDR_DQ1.GPIO_Label=DDR_DQ1 [MT41K256M16TW_DQU1]
+DDR_DQ1.Locked=true
+DDR_DQ1.Mode=DDR3
+DDR_DQ1.Signal=DDR_DQ1
+DDR_DQ10.GPIOParameters=GPIO_Label
+DDR_DQ10.GPIO_Label=DDR_DQ10 [MT41K256M16TW_DQL6]
+DDR_DQ10.Locked=true
+DDR_DQ10.Mode=DDR3
+DDR_DQ10.Signal=DDR_DQ10
+DDR_DQ11.GPIOParameters=GPIO_Label
+DDR_DQ11.GPIO_Label=DDR_DQ11 [MT41K256M16TW_DQL1]
+DDR_DQ11.Locked=true
+DDR_DQ11.Mode=DDR3
+DDR_DQ11.Signal=DDR_DQ11
+DDR_DQ12.GPIOParameters=GPIO_Label
+DDR_DQ12.GPIO_Label=DDR_DQ12 [MT41K256M16TW_DQL5]
+DDR_DQ12.Locked=true
+DDR_DQ12.Mode=DDR3
+DDR_DQ12.Signal=DDR_DQ12
+DDR_DQ13.GPIOParameters=GPIO_Label
+DDR_DQ13.GPIO_Label=DDR_DQ13 [MT41K256M16TW_DQL4]
+DDR_DQ13.Locked=true
+DDR_DQ13.Mode=DDR3
+DDR_DQ13.Signal=DDR_DQ13
+DDR_DQ14.GPIOParameters=GPIO_Label
+DDR_DQ14.GPIO_Label=DDR_DQ14 [MT41K256M16TW_DQL7]
+DDR_DQ14.Locked=true
+DDR_DQ14.Mode=DDR3
+DDR_DQ14.Signal=DDR_DQ14
+DDR_DQ15.GPIOParameters=GPIO_Label
+DDR_DQ15.GPIO_Label=DDR_DQ15 [MT41K256M16TW_DQL3]
+DDR_DQ15.Locked=true
+DDR_DQ15.Mode=DDR3
+DDR_DQ15.Signal=DDR_DQ15
+DDR_DQ2.GPIOParameters=GPIO_Label
+DDR_DQ2.GPIO_Label=DDR_DQ2 [MT41K256M16TW_DQU4]
+DDR_DQ2.Locked=true
+DDR_DQ2.Mode=DDR3
+DDR_DQ2.Signal=DDR_DQ2
+DDR_DQ3.GPIOParameters=GPIO_Label
+DDR_DQ3.GPIO_Label=DDR_DQ3 [MT41K256M16TW_DQU3]
+DDR_DQ3.Locked=true
+DDR_DQ3.Mode=DDR3
+DDR_DQ3.Signal=DDR_DQ3
+DDR_DQ4.GPIOParameters=GPIO_Label
+DDR_DQ4.GPIO_Label=DDR_DQ4 [MT41K256M16TW_DQU6]
+DDR_DQ4.Locked=true
+DDR_DQ4.Mode=DDR3
+DDR_DQ4.Signal=DDR_DQ4
+DDR_DQ5.GPIOParameters=GPIO_Label
+DDR_DQ5.GPIO_Label=DDR_DQ5 [MT41K256M16TW_DQU2]
+DDR_DQ5.Locked=true
+DDR_DQ5.Mode=DDR3
+DDR_DQ5.Signal=DDR_DQ5
+DDR_DQ6.GPIOParameters=GPIO_Label
+DDR_DQ6.GPIO_Label=DDR_DQ6 [MT41K256M16TW_DQU0]
+DDR_DQ6.Locked=true
+DDR_DQ6.Mode=DDR3
+DDR_DQ6.Signal=DDR_DQ6
+DDR_DQ7.GPIOParameters=GPIO_Label
+DDR_DQ7.GPIO_Label=DDR_DQ7 [MT41K256M16TW_DQU7]
+DDR_DQ7.Locked=true
+DDR_DQ7.Mode=DDR3
+DDR_DQ7.Signal=DDR_DQ7
+DDR_DQ8.GPIOParameters=GPIO_Label
+DDR_DQ8.GPIO_Label=DDR_DQ8 [MT41K256M16TW_DQL2]
+DDR_DQ8.Locked=true
+DDR_DQ8.Mode=DDR3
+DDR_DQ8.Signal=DDR_DQ8
+DDR_DQ9.GPIOParameters=GPIO_Label
+DDR_DQ9.GPIO_Label=DDR_DQ9 [MT41K256M16TW_DQL0]
+DDR_DQ9.Locked=true
+DDR_DQ9.Mode=DDR3
+DDR_DQ9.Signal=DDR_DQ9
+DDR_DQM0.GPIOParameters=GPIO_Label
+DDR_DQM0.GPIO_Label=DDR_DQM0 [MT41K256M16TW_DMU]
+DDR_DQM0.Locked=true
+DDR_DQM0.Mode=DDR3
+DDR_DQM0.Signal=DDR_DQM0
+DDR_DQM1.GPIOParameters=GPIO_Label
+DDR_DQM1.GPIO_Label=DDR_DQM1 [MT41K256M16TW_DML]
+DDR_DQM1.Locked=true
+DDR_DQM1.Mode=DDR3
+DDR_DQM1.Signal=DDR_DQM1
+DDR_DQS0N.GPIOParameters=GPIO_Label
+DDR_DQS0N.GPIO_Label=DDR_DQS0_N [MT41K256M16TW_DQSU\#]
+DDR_DQS0N.Locked=true
+DDR_DQS0N.Mode=DDR3
+DDR_DQS0N.Signal=DDR_DQS0N
+DDR_DQS0P.GPIOParameters=GPIO_Label
+DDR_DQS0P.GPIO_Label=DDR_DQS0_P [MT41K256M16TW_DQSU]
+DDR_DQS0P.Locked=true
+DDR_DQS0P.Mode=DDR3
+DDR_DQS0P.Signal=DDR_DQS0P
+DDR_DQS1N.GPIOParameters=GPIO_Label
+DDR_DQS1N.GPIO_Label=DDR_DQS1_N [MT41K256M16TW_DQSL\#]
+DDR_DQS1N.Locked=true
+DDR_DQS1N.Mode=DDR3
+DDR_DQS1N.Signal=DDR_DQS1N
+DDR_DQS1P.GPIOParameters=GPIO_Label
+DDR_DQS1P.GPIO_Label=DDR_DQS1_P [MT41K256M16TW_DQSL]
+DDR_DQS1P.Locked=true
+DDR_DQS1P.Mode=DDR3
+DDR_DQS1P.Signal=DDR_DQS1P
+DDR_DTO0.GPIOParameters=GPIO_Label
+DDR_DTO0.GPIO_Label=DDR_DTO0
+DDR_DTO0.Locked=true
+DDR_DTO0.Mode=DDR3
+DDR_DTO0.Signal=DDR_DTO0
+DDR_DTO1.GPIOParameters=GPIO_Label
+DDR_DTO1.GPIO_Label=DDR_DTO1
+DDR_DTO1.Locked=true
+DDR_DTO1.Mode=DDR3
+DDR_DTO1.Signal=DDR_DTO1
+DDR_ODT.GPIOParameters=GPIO_Label
+DDR_ODT.GPIO_Label=DDR_ODT [MT41K256M16TW_ODT]
+DDR_ODT.Locked=true
+DDR_ODT.Mode=DDR3
+DDR_ODT.Signal=DDR_ODT
+DDR_RASN.GPIOParameters=GPIO_Label
+DDR_RASN.GPIO_Label=DDR_RASN [MT41K256M16TW_RAS\#]
+DDR_RASN.Locked=true
+DDR_RASN.Mode=DDR3
+DDR_RASN.Signal=DDR_RASN
+DDR_RESETN.GPIOParameters=GPIO_Label
+DDR_RESETN.GPIO_Label=DDR_RESETN [MT41K256M16TW_RESET\#]
+DDR_RESETN.Locked=true
+DDR_RESETN.Mode=DDR3
+DDR_RESETN.Signal=DDR_RESETN
+DDR_VREF.GPIOParameters=GPIO_Label
+DDR_VREF.GPIO_Label=VREF_DDR
+DDR_VREF.Locked=true
+DDR_VREF.Mode=DDR3
+DDR_VREF.Signal=DDR_VREF
+DDR_WEN.GPIOParameters=GPIO_Label
+DDR_WEN.GPIO_Label=DDR_WEN_P [MT41K256M16TW_WE\#]
+DDR_WEN.Locked=true
+DDR_WEN.Mode=DDR3
+DDR_WEN.Signal=DDR_WEN
+DDR_ZQ.GPIOParameters=GPIO_Label
+DDR_ZQ.GPIO_Label=DDR_ZQ
+DDR_ZQ.Locked=true
+DDR_ZQ.Mode=DDR3
+DDR_ZQ.Signal=DDR_ZQ
+File.Version=6
+GIC.IPCC_RX0_IRQn=true\:false\:High level
+GIC.IPCC_TX0_IRQn=true\:false\:High level
+GIC.PMUIRQ0_IRQn=true\:false\:High level
+GIC.PMUIRQ1_IRQn=true\:false\:High level
+GIC.RCC_IRQn=true\:false\:High level
+GIC.RTC_WKUP_ALARM_IRQn=true\:false\:High level
+GIC.WAKEUP_PIN_IRQn=true\:false\:High level
+GPIO.groupedBy=Expand Peripherals
+KeepUserPlacement=false
+Mcu.Context0=BootROM
+Mcu.Context1=BootLoader
+Mcu.Context2=CortexA7S
+Mcu.Context3=CortexA7NS
+Mcu.Context4=CortexM4
+Mcu.ContextNb=5
+Mcu.Family=STM32MP1
+Mcu.IP0=ADC2
+Mcu.IP1=BSEC
+Mcu.IP10=LPTIM4
+Mcu.IP11=LPTIM5
+Mcu.IP12=NVIC
+Mcu.IP13=PWR
+Mcu.IP14=RCC
+Mcu.IP15=RTC
+Mcu.IP16=SPI5
+Mcu.IP17=SYS
+Mcu.IP18=TAMP
+Mcu.IP19=TIM4
+Mcu.IP2=DAC1
+Mcu.IP20=TIM14
+Mcu.IP21=TIM16
+Mcu.IP22=TIM17
+Mcu.IP23=UART4
+Mcu.IP24=USART3
+Mcu.IP25=VREFBUF
+Mcu.IP26=WWDG1
+Mcu.IP3=DDR
+Mcu.IP4=GIC
+Mcu.IP5=HSEM
+Mcu.IP6=IPCC
+Mcu.IP7=LPTIM1
+Mcu.IP8=LPTIM2
+Mcu.IP9=LPTIM3
+Mcu.IPNb=27
+Mcu.Name=STM32MP157AACx
+Mcu.Package=TFBGA361
+Mcu.Pin0=PH5
+Mcu.Pin1=PF2
+Mcu.Pin10=DDR_DQ3
+Mcu.Pin100=VP_TAMP_VS_TAMP_Activate
+Mcu.Pin101=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin102=VP_TIM14_VS_ClockSourceINT
+Mcu.Pin103=VP_TIM16_VS_ClockSourceINT
+Mcu.Pin104=VP_TIM17_VS_ClockSourceINT
+Mcu.Pin105=VP_VREFBUF_VS_VREFBUF
+Mcu.Pin106=VP_WWDG1_VS_WWDG
+Mcu.Pin107=VP_DMA_VS_DMA1_A7NS
+Mcu.Pin108=VP_DMA_VS_DMA2_M4
+Mcu.Pin109=VP_MDMA_VS_MDMA_A7NS_8
+Mcu.Pin11=DDR_DQ0
+Mcu.Pin12=DDR_A13
+Mcu.Pin13=DDR_DQ1
+Mcu.Pin14=DDR_A9
+Mcu.Pin15=DDR_DQ7
+Mcu.Pin16=DDR_DQS0P
+Mcu.Pin17=DDR_DQS0N
+Mcu.Pin18=PZ6
+Mcu.Pin19=DDR_A5
+Mcu.Pin2=PH4
+Mcu.Pin20=DDR_DQ2
+Mcu.Pin21=DDR_DQ6
+Mcu.Pin22=DDR_DQM0
+Mcu.Pin23=PZ7
+Mcu.Pin24=DDR_A2
+Mcu.Pin25=DDR_DQ4
+Mcu.Pin26=DDR_DQ5
+Mcu.Pin27=PC13
+Mcu.Pin28=DDR_DTO0
+Mcu.Pin29=DDR_A3
+Mcu.Pin3=PD0
+Mcu.Pin30=DDR_ZQ
+Mcu.Pin31=PC15-OSC32_OUT
+Mcu.Pin32=PC14-OSC32_IN
+Mcu.Pin33=DDR_A0
+Mcu.Pin34=DDR_DTO1
+Mcu.Pin35=DDR_ODT
+Mcu.Pin36=DDR_BA0
+Mcu.Pin37=DDR_WEN
+Mcu.Pin38=DDR_BA2
+Mcu.Pin39=DDR_CSN
+Mcu.Pin4=PC6
+Mcu.Pin40=PA13
+Mcu.Pin41=DDR_CASN
+Mcu.Pin42=DDR_RASN
+Mcu.Pin43=DDR_CLKP
+Mcu.Pin44=DDR_CLKN
+Mcu.Pin45=PH0-OSC_IN
+Mcu.Pin46=PI11
+Mcu.Pin47=DDR_A1
+Mcu.Pin48=DDR_A12
+Mcu.Pin49=DDR_A11
+Mcu.Pin5=PA15
+Mcu.Pin50=DDR_A14
+Mcu.Pin51=DDR_A10
+Mcu.Pin52=PA14
+Mcu.Pin53=DDR_CKE
+Mcu.Pin54=DDR_DQ8
+Mcu.Pin55=DDR_DQ10
+Mcu.Pin56=DDR_DQ13
+Mcu.Pin57=DDR_BA1
+Mcu.Pin58=DDR_DQ9
+Mcu.Pin59=DDR_DQS1P
+Mcu.Pin6=PB7
+Mcu.Pin60=DDR_DQS1N
+Mcu.Pin61=PA4
+Mcu.Pin62=DDR_A4
+Mcu.Pin63=DDR_DQM1
+Mcu.Pin64=PG1
+Mcu.Pin65=PH7
+Mcu.Pin66=DDR_A6
+Mcu.Pin67=DDR_DQ11
+Mcu.Pin68=DDR_DQ14
+Mcu.Pin69=DDR_DQ12
+Mcu.Pin7=PE4
+Mcu.Pin70=PB10
+Mcu.Pin71=PG11
+Mcu.Pin72=PG9
+Mcu.Pin73=PB2
+Mcu.Pin74=PA10
+Mcu.Pin75=DDR_ATO
+Mcu.Pin76=DDR_A8
+Mcu.Pin77=DDR_DQ15
+Mcu.Pin78=PF9
+Mcu.Pin79=PD13
+Mcu.Pin8=DDR_RESETN
+Mcu.Pin80=PA0
+Mcu.Pin81=PF7
+Mcu.Pin82=PF14
+Mcu.Pin83=PB12
+Mcu.Pin84=PA6
+Mcu.Pin85=PD11
+Mcu.Pin86=DDR_VREF
+Mcu.Pin87=VP_BSEC_VS_BSEC
+Mcu.Pin88=VP_DDR_DDR3
+Mcu.Pin89=VP_DDR_DDR_16_bits
+Mcu.Pin9=DDR_A7
+Mcu.Pin90=VP_DDR_DDR3_16_4Gb
+Mcu.Pin91=VP_HSEM_VS_HSEM
+Mcu.Pin92=VP_IPCC_VS_IPCC
+Mcu.Pin93=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
+Mcu.Pin94=VP_LPTIM2_VS_LPTIM_counterModeInternalClock
+Mcu.Pin95=VP_LPTIM3_VS_LPTIM_counterModeInternalClock
+Mcu.Pin96=VP_LPTIM4_VS_LPTIM_counterModeInternalClock
+Mcu.Pin97=VP_LPTIM5_VS_LPTIM_counterModeInternalClock
+Mcu.Pin98=VP_RTC_VS_RTC_Activate
+Mcu.Pin99=VP_SYS_VS_Systick
+Mcu.PinsNb=110
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32MP157AACx
+MxCube.Version=5.6.1
+MxDb.Version=DB.5.0.60
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.IPCC_RX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.IPCC_TX1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.LPTIM1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.LPTIM2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.LPTIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.LPTIM4_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.LPTIM5_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.WWDG1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+PA0.Locked=true
+PA0.Mode=WakeUp1
+PA0.Signal=PWR_WKUP1
+PA10.GPIOParameters=GPIO_Label
+PA10.GPIO_Label=HDMI_NRST [SiI9022ACNU_RESET\#]
+PA10.Locked=true
+PA10.Signal=GPIO_Output
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=PA13 [LD6_RED]
+PA13.Locked=true
+PA13.Signal=GPIO_Output
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=PA14 [SW-PUSH-TS-02H-Blue]
+PA14.Locked=true
+PA14.Signal=GPIO_Input
+PA15.GPIOParameters=GPIO_Label
+PA15.GPIO_Label=BL_CTRL [STLD40DPUR_EN]
+PA15.Locked=true
+PA15.Signal=GPIO_Output
+PA4.Signal=COMP_DAC11_group
+PA6.GPIOParameters=GPIO_Label
+PA6.GPIO_Label=ETH_MDINT [RTL8211F_INT]
+PA6.Locked=true
+PA6.Signal=GPIO_Input
+PB10.Locked=true
+PB10.Mode=Asynchronous
+PB10.Signal=USART3_TX
+PB12.Locked=true
+PB12.Mode=Asynchronous
+PB12.Signal=USART3_RX
+PB2.GPIOParameters=GPIO_Label
+PB2.GPIO_Label=STLINK_TX [STM32F103CBT6_PA2]
+PB2.Locked=true
+PB2.Mode=Asynchronous
+PB2.Signal=UART4_RX
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=uSD_DETECT [PJS008-2003-1]
+PB7.Locked=true
+PB7.Signal=GPIO_Input
+PC13.GPIOParameters=GPIO_Label
+PC13.GPIO_Label=PMIC_WAKEUP [STPMU1A_WAKEUP]
+PC13.Locked=true
+PC13.Signal=GPIO_Output
+PC14-OSC32_IN.Locked=true
+PC14-OSC32_IN.Mode=LSE-External-Oscillator
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.Locked=true
+PC15-OSC32_OUT.Mode=LSE-External-Oscillator
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PC6.GPIOParameters=GPIO_Label
+PC6.GPIO_Label=TE  [FH26W-25S_TE]
+PC6.Locked=true
+PC6.Signal=GPIO_Output
+PD0.GPIOParameters=GPIO_Label
+PD0.GPIO_Label=WL_HOST_WAKE [LBEE5KL1DX_WL_HOST_WAKE]
+PD0.Locked=true
+PD0.Signal=GPIO_Input
+PD11.GPIOParameters=GPIO_Label
+PD11.GPIO_Label=LED_B [LD8_BLUE]
+PD11.Locked=true
+PD11.Signal=GPIO_Output
+PD13.Signal=S_TIM4_CH2
+PE4.GPIOParameters=GPIO_Label
+PE4.GPIO_Label=RSTN  [FH26W-25S_RSTN]
+PE4.Locked=true
+PE4.Signal=GPIO_Output
+PF14.Locked=true
+PF14.Mode=IN6-Single-Ended
+PF14.Signal=ADC2_INP6
+PF2.GPIOParameters=GPIO_Label
+PF2.GPIO_Label=INT [FH26W-25S_INT]
+PF2.Locked=true
+PF2.Signal=GPIO_Input
+PF7.Locked=true
+PF7.Mode=TX_Only_Simplex_Unidirect_Master
+PF7.Signal=SPI5_SCK
+PF9.Mode=TX_Only_Simplex_Unidirect_Master
+PF9.Signal=SPI5_MOSI
+PG1.GPIOParameters=GPIO_Label
+PG1.GPIO_Label=HDMI_INT [SiI9022ACNU_INT]
+PG1.Locked=true
+PG1.Signal=GPIO_Input
+PG11.GPIOParameters=GPIO_Label
+PG11.GPIO_Label=STLINK_RX [STM32F103CBT6_PA3]
+PG11.Locked=true
+PG11.Mode=Asynchronous
+PG11.Signal=UART4_TX
+PG9.GPIOParameters=GPIO_Label
+PG9.GPIO_Label=AUDIO_RST [CS42L51-CNZ_RESET]
+PG9.Locked=true
+PG9.Signal=GPIO_Output
+PH0-OSC_IN.Locked=true
+PH0-OSC_IN.Mode=HSE-DIG-External-Clock-Source
+PH0-OSC_IN.Signal=RCC_OSC_IN
+PH4.GPIOParameters=GPIO_Label
+PH4.GPIO_Label=WL_REG_ON [LBEE5KL1DX_WL_REG_ON]
+PH4.Locked=true
+PH4.Signal=GPIO_Output
+PH5.GPIOParameters=GPIO_Label
+PH5.GPIO_Label=BT_HOST_WAKE [LBEE5KL1DX_BT_HOST_WAKE]
+PH5.Locked=true
+PH5.Signal=GPIO_Input
+PH7.GPIOParameters=GPIO_Label
+PH7.GPIO_Label=LED_Y [LD7_ORANGE]
+PH7.Locked=true
+PH7.Signal=GPIO_Output
+PI11.GPIOParameters=GPIO_Label
+PI11.GPIO_Label=STUSB1600_IRQOUTn [STUSB1600_ALERT\#]
+PI11.Locked=true
+PI11.Signal=GPIO_Input
+PZ6.GPIOParameters=GPIO_Label
+PZ6.GPIO_Label=BT_REG_ON [LBEE5KL1DX_BT_REG_ON]
+PZ6.Locked=true
+PZ6.Signal=GPIO_Output
+PZ7.GPIOParameters=GPIO_Label
+PZ7.GPIO_Label=BT_DEV_WAKE [LBEE5KL1DX_BT_DEV_WAKE]
+PZ7.Locked=true
+PZ7.Signal=GPIO_Output
+PinOutPanel.CurrentBGAView=Top
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32MP157AACx
+ProjectManager.DeviceTreeLocation=D\:\\3_work\\GitRepositories\\rt-thread\\bsp\\stm32\\stm32mp157a-st-discovery\\board\\CubeMX_Config\\STM32MP157-DK1\\CA7\\DeviceTree\\
+ProjectManager.FirmwarePackage=STM32Cube FW_MP1 V1.2.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=STM32MP157-DK1.ioc
+ProjectManager.ProjectName=STM32MP157-DK1
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=EWARM V8.32
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_IPCC_Init-IPCC-false-HAL-true,4-MX_SPI5_Init-SPI5-false-HAL-true,5-MX_TIM4_Init-TIM4-false-HAL-true,6-MX_TIM14_Init-TIM14-false-HAL-true,7-MX_TIM16_Init-TIM16-false-HAL-true,8-MX_TIM17_Init-TIM17-false-HAL-true,9-MX_UART4_Init-UART4-false-HAL-true,10-MX_ADC2_Init-ADC2-false-HAL-true,11-MX_DAC1_Init-DAC1-false-HAL-true,12-MX_LPTIM1_Init-LPTIM1-false-HAL-true,13-MX_LPTIM2_Init-LPTIM2-false-HAL-true,14-MX_LPTIM3_Init-LPTIM3-false-HAL-true,15-MX_LPTIM4_Init-LPTIM4-false-HAL-true,16-MX_LPTIM5_Init-LPTIM5-false-HAL-true,17-MX_USART3_UART_Init-USART3-false-HAL-true,18-MX_WWDG1_Init-WWDG1-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true
+RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_PER
+RCC.ADCFreq_Value=24000000
+RCC.AHB1234Freq_Value=208877929.6875
+RCC.APB1DIV=RCC_APB1_DIV2
+RCC.APB1Freq_Value=104438964.84375
+RCC.APB2DIV=RCC_APB2_DIV2
+RCC.APB2Freq_Value=104438964.84375
+RCC.APB3DIV=RCC_APB3_DIV2
+RCC.APB3Freq_Value=104438964.84375
+RCC.APB4DIV=RCC_APB4_DIV2
+RCC.APB4Freq_Value=133250000
+RCC.APB5DIV=RCC_APB5_DIV4
+RCC.APB5DIVClockFreq_Value=66625000
+RCC.AXICLKFreq_VALUE=266500000
+RCC.AXICLKSource=RCC_AXISSOURCE_PLL2
+RCC.AXIDIVFreq_Value=266500000
+RCC.CECFreq_Value=32768
+RCC.CKPERCLKFreq_VALUE=24000000
+RCC.CKPERCLKSource=RCC_CKPERCLKSOURCE_HSE
+RCC.CSI_VALUE=4000000
+RCC.CortexFreq_Value=208877929.6875
+RCC.DACCLKFreq_VALUE=32000
+RCC.DDRCFreq_Value=533000000
+RCC.DDRPERFMFreq_Value=533000000
+RCC.DDRPHYFreq_Value=533000000
+RCC.DFSDFAFreq_Value=74250000
+RCC.DFSDMFreq_Value=208877929.6875
+RCC.DIVM1=3
+RCC.DIVM2=3
+RCC.DIVM3=2
+RCC.DIVM4=4
+RCC.DIVN1=81
+RCC.DIVN2=66
+RCC.DIVN3=34
+RCC.DIVN4=99
+RCC.DIVP1Freq_Value=650000000
+RCC.DIVP2Freq_Value=266500000
+RCC.DIVP3Freq_Value=208877929.6875
+RCC.DIVP4=6
+RCC.DIVP4Freq_Value=99000000
+RCC.DIVQ1Freq_Value=325000000
+RCC.DIVQ2=1
+RCC.DIVQ2Freq_Value=533000000
+RCC.DIVQ3=17
+RCC.DIVQ3Freq_Value=24573874.08088235
+RCC.DIVQ4=8
+RCC.DIVQ4Freq_Value=74250000
+RCC.DIVR1Freq_Value=325000000
+RCC.DIVR2=1
+RCC.DIVR2Freq_Value=533000000
+RCC.DIVR3=37
+RCC.DIVR3Freq_Value=11290698.902027028
+RCC.DIVR4=8
+RCC.DIVR4Freq_Value=74250000
+RCC.DSIFreq_Value=60000000
+RCC.DSIPixelFreq_Value=74250000
+RCC.DSITXEscFreq_Value=15000000
+RCC.DSI_VALUE=60000000
+RCC.ETHFreq_Value=99000000
+RCC.FCLKFreq_Value=196000000
+RCC.FDCANFreq_Value=24000000
+RCC.FMCCLockSelection=RCC_FMCCLKSOURCE_ACLK
+RCC.FMCFreq_Value=266500000
+RCC.FamilyName=M
+RCC.HSE_VALUE=24000000
+RCC.HSIDivClkFreq_Value=64000000
+RCC.HSI_VALUE=64000000
+RCC.Hclk5DIVFreq_Value=266500000
+RCC.Hclk6DIVFreq_Value=266500000
+RCC.I2C12CLockSelection=RCC_I2C12CLKSOURCE_HSI
+RCC.I2C12Freq_Value=64000000
+RCC.I2C35CLockSelection=RCC_I2C35CLKSOURCE_PCLK1
+RCC.I2C35Freq_Value=104438964.84375
+RCC.I2C46CLockSelection=RCC_I2C46CLKSOURCE_HSI
+RCC.I2C46Freq_Value=64000000
+RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHB1234Freq_Value,APB1DIV,APB1Freq_Value,APB2DIV,APB2Freq_Value,APB3DIV,APB3Freq_Value,APB4DIV,APB4Freq_Value,APB5DIV,APB5DIVClockFreq_Value,AXICLKFreq_VALUE,AXICLKSource,AXIDIVFreq_Value,CECFreq_Value,CKPERCLKFreq_VALUE,CKPERCLKSource,CSI_VALUE,CortexFreq_Value,DACCLKFreq_VALUE,DDRCFreq_Value,DDRPERFMFreq_Value,DDRPHYFreq_Value,DFSDFAFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVM4,DIVN1,DIVN2,DIVN3,DIVN4,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVP4,DIVP4Freq_Value,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVQ4,DIVQ4Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,DIVR4,DIVR4Freq_Value,DSIFreq_Value,DSIPixelFreq_Value,DSITXEscFreq_Value,DSI_VALUE,ETHFreq_Value,FCLKFreq_Value,FDCANFreq_Value,FMCCLockSelection,FMCFreq_Value,FamilyName,HSE_VALUE,HSIDivClkFreq_Value,HSI_VALUE,Hclk5DIVFreq_Value,Hclk6DIVFreq_Value,I2C12CLockSelection,I2C12Freq_Value,I2C35CLockSelection,I2C35Freq_Value,I2C46CLockSelection,I2C46Freq_Value,LPTIM1CLockSelection,LPTIM1Freq_Value,LPTIM23CLockSelection,LPTIM23Freq_Value,LPTIM45CLockSelection,LPTIM45Freq_Value,LSI_VALUE,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,MCUCLKFreq_VALUE,MCUCLKSource,MCUClockFreq_Value,MCUDIVCLKFreq_Value,MPUCLKFreq_VALUE,MPUCLKSource,PLL12Source,PLL1FRACV,PLL1UserDefinedConfig,PLL2FRACV,PLL3FRACV,PLL3Source,PLL4FRACV,PLL4PDSIFreq_Value,PLL4Source,PLLDSIFreq_Value,PLLDSIVCOFreq_Value,PUBLFreq_Value,QSPICLockSelection,QSPIFreq_Value,RCC_RTC_Clock_Source_FROM_HSE,RNG1CLockSelection,RNG1Freq_Value,RNG2Freq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2CLockSelection,SAI2Freq_Value,SAI3Freq_Value,SAI4Freq_Value,SDMMC12CLockSelection,SDMMC12Freq_Value,SDMMC3CLockSelection,SDMMC3Freq_Value,SPDIFRXFreq_Value,SPI1CLockSelection,SPI1Freq_Value,SPI23CLockSelection,SPI23Freq_Value,SPI45CLockSelection,SPI45Freq_Value,SPI6CLockSelection,SPI6Freq_Value,STGENCLockSelection,STGENFreq_Value,Tim1OutputFreq_Value,Tim2OutputFreq_Value,UART78CLockSelection,UART78Freq_Value,USART1CLockSelection,USART1Freq_Value,USART24CLockSelection,USART24Freq_Value,USART35CLockSelection,USART35Freq_Value,USART6CLockSelection,USART6Freq_Value,USBOCLKSource,USBOHSFreq_Value,USBPHYCLKSource,USBPHYFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCO4OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInput4Freq_Value
+RCC.LPTIM1CLockSelection=RCC_LPTIM1CLKSOURCE_PCLK1
+RCC.LPTIM1Freq_Value=104438964.84375
+RCC.LPTIM23CLockSelection=RCC_LPTIM23CLKSOURCE_PCLK3
+RCC.LPTIM23Freq_Value=104438964.84375
+RCC.LPTIM45CLockSelection=RCC_LPTIM45CLKSOURCE_PCLK3
+RCC.LPTIM45Freq_Value=104438964.84375
+RCC.LSI_VALUE=32000
+RCC.LTDCFreq_Value=74250000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MCO2PinFreq_Value=650000000
+RCC.MCUCLKFreq_VALUE=208877929.6875
+RCC.MCUCLKSource=RCC_MCUSSOURCE_PLL3
+RCC.MCUClockFreq_Value=208877929.6875
+RCC.MCUDIVCLKFreq_Value=208877929.6875
+RCC.MPUCLKFreq_VALUE=650000000
+RCC.MPUCLKSource=RCC_MPUSOURCE_PLL1
+RCC.PLL12Source=RCC_PLL12SOURCE_HSE
+RCC.PLL1FRACV=0x800
+RCC.PLL1UserDefinedConfig=false
+RCC.PLL2FRACV=0x1400
+RCC.PLL3FRACV=6660
+RCC.PLL3Source=RCC_PLL3SOURCE_HSE
+RCC.PLL4FRACV=0
+RCC.PLL4PDSIFreq_Value=99000000
+RCC.PLL4Source=RCC_PLL4SOURCE_HSE
+RCC.PLLDSIFreq_Value=480000000
+RCC.PLLDSIVCOFreq_Value=960000000
+RCC.PUBLFreq_Value=533000000
+RCC.QSPICLockSelection=RCC_QSPICLKSOURCE_ACLK
+RCC.QSPIFreq_Value=266500000
+RCC.RCC_RTC_Clock_Source_FROM_HSE=24
+RCC.RNG1CLockSelection=RCC_RNG1CLKSOURCE_LSI
+RCC.RNG1Freq_Value=32000
+RCC.RNG2Freq_Value=4000000
+RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
+RCC.RTCFreq_Value=32768
+RCC.SAI1Freq_Value=74250000
+RCC.SAI2CLockSelection=RCC_SAI2CLKSOURCE_PLL3_Q
+RCC.SAI2Freq_Value=24573874.08088235
+RCC.SAI3Freq_Value=74250000
+RCC.SAI4Freq_Value=74250000
+RCC.SDMMC12CLockSelection=RCC_SDMMC12CLKSOURCE_PLL4
+RCC.SDMMC12Freq_Value=99000000
+RCC.SDMMC3CLockSelection=RCC_SDMMC3CLKSOURCE_HCLK2
+RCC.SDMMC3Freq_Value=208877929.6875
+RCC.SPDIFRXFreq_Value=99000000
+RCC.SPI1CLockSelection=RCC_SPI1CLKSOURCE_PLL3_Q
+RCC.SPI1Freq_Value=24573874.08088235
+RCC.SPI23CLockSelection=RCC_SPI23CLKSOURCE_PLL3_Q
+RCC.SPI23Freq_Value=24573874.08088235
+RCC.SPI45CLockSelection=RCC_SPI45CLKSOURCE_PCLK2
+RCC.SPI45Freq_Value=104438964.84375
+RCC.SPI6CLockSelection=RCC_SPI6CLKSOURCE_PCLK5
+RCC.SPI6Freq_Value=66625000
+RCC.STGENCLockSelection=RCC_STGENCLKSOURCE_HSE
+RCC.STGENFreq_Value=24000000
+RCC.Tim1OutputFreq_Value=208877929.6875
+RCC.Tim2OutputFreq_Value=208877929.6875
+RCC.UART78CLockSelection=RCC_UART78CLKSOURCE_PCLK1
+RCC.UART78Freq_Value=104438964.84375
+RCC.USART1CLockSelection=RCC_USART1CLKSOURCE_PCLK5
+RCC.USART1Freq_Value=66625000
+RCC.USART24CLockSelection=RCC_UART24CLKSOURCE_HSI
+RCC.USART24Freq_Value=64000000
+RCC.USART35CLockSelection=RCC_UART35CLKSOURCE_PCLK1
+RCC.USART35Freq_Value=104438964.84375
+RCC.USART6CLockSelection=RCC_USART6CLKSOURCE_PCLK2
+RCC.USART6Freq_Value=104438964.84375
+RCC.USBOCLKSource=RCC_USBOCLKSOURCE_PHY
+RCC.USBOHSFreq_Value=48000000
+RCC.USBPHYCLKSource=RCC_USBPHYCLKSOURCE_HSE
+RCC.USBPHYFreq_Value=24000000
+RCC.VCO1OutputFreq_Value=1300000000
+RCC.VCO2OutputFreq_Value=1066000000
+RCC.VCO3OutputFreq_Value=417755859.375
+RCC.VCO4OutputFreq_Value=594000000
+RCC.VCOInput1Freq_Value=8000000
+RCC.VCOInput2Freq_Value=8000000
+RCC.VCOInput3Freq_Value=12000000
+RCC.VCOInput4Freq_Value=6000000
+SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1
+SH.COMP_DAC11_group.ConfNb=1
+SH.S_TIM4_CH2.0=TIM4_CH2,PWM Generation2 CH2
+SH.S_TIM4_CH2.ConfNb=1
+SPI5.CalculateBaudRate=26.10974 MBits/s
+SPI5.Direction=SPI_DIRECTION_2LINES_TXONLY
+SPI5.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+SPI5.Mode=SPI_MODE_MASTER
+SPI5.VirtualType=VM_MASTER
+TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
+TIM4.IPParameters=Channel-PWM Generation2 CH2
+USART3.IPParameters=VirtualMode-Asynchronous
+USART3.VirtualMode-Asynchronous=VM_ASYNC
+VP_BSEC_VS_BSEC.Mode=BSEC_Activate
+VP_BSEC_VS_BSEC.Signal=BSEC_VS_BSEC
+VP_DDR_DDR3.Mode=DDR3
+VP_DDR_DDR3.Signal=DDR_DDR3
+VP_DDR_DDR3_16_4Gb.Mode=4Gb_16bits
+VP_DDR_DDR3_16_4Gb.Signal=DDR_DDR3_16_4Gb
+VP_DDR_DDR_16_bits.Mode=16bits
+VP_DDR_DDR_16_bits.Signal=DDR_DDR_16_bits
+VP_DMA_VS_DMA1_A7NS.Mode=CortexA7NS
+VP_DMA_VS_DMA1_A7NS.Signal=DMA_VS_DMA1_A7NS
+VP_DMA_VS_DMA2_M4.Mode=CortexM4
+VP_DMA_VS_DMA2_M4.Signal=DMA_VS_DMA2_M4
+VP_HSEM_VS_HSEM.Mode=HSEM_Activate
+VP_HSEM_VS_HSEM.Signal=HSEM_VS_HSEM
+VP_IPCC_VS_IPCC.Mode=IPCC_Activate
+VP_IPCC_VS_IPCC.Signal=IPCC_VS_IPCC
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
+VP_LPTIM2_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM2_VS_LPTIM_counterModeInternalClock.Signal=LPTIM2_VS_LPTIM_counterModeInternalClock
+VP_LPTIM3_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM3_VS_LPTIM_counterModeInternalClock.Signal=LPTIM3_VS_LPTIM_counterModeInternalClock
+VP_LPTIM4_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM4_VS_LPTIM_counterModeInternalClock.Signal=LPTIM4_VS_LPTIM_counterModeInternalClock
+VP_LPTIM5_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_LPTIM5_VS_LPTIM_counterModeInternalClock.Signal=LPTIM5_VS_LPTIM_counterModeInternalClock
+VP_MDMA_VS_MDMA_A7NS_8.Mode=8\:8
+VP_MDMA_VS_MDMA_A7NS_8.Signal=MDMA_VS_MDMA_A7NS_8
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TAMP_VS_TAMP_Activate.Mode=TAMP_Enabled
+VP_TAMP_VS_TAMP_Activate.Signal=TAMP_VS_TAMP_Activate
+VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
+VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
+VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
+VP_TIM4_VS_ClockSourceINT.Mode=Internal
+VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
+VP_VREFBUF_VS_VREFBUF.Mode=VREFBUF_Activate
+VP_VREFBUF_VS_VREFBUF.Signal=VREFBUF_VS_VREFBUF
+VP_WWDG1_VS_WWDG.Mode=WWDG_Activate
+VP_WWDG1_VS_WWDG.Signal=WWDG1_VS_WWDG
+WWDG1.IPParameters=Prescaler
+WWDG1.Prescaler=WWDG_PRESCALER_8
+board=STM32MP157A-DK1
+boardIOC=true

bsp/stm32/stm32mp157a-st-ev1/board/Kconfig

@@ -0,0 +1,177 @@
+menu "Hardware Drivers Config"
+
+config SOC_STM32MP157A
+    bool
+    select SOC_SERIES_STM32MP1
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+    config BSP_USING_STLINK_TO_USART
+        bool "Enable STLINK TO USART (uart4)"
+        select BSP_USING_UART
+        select BSP_USING_UART4
+        default y
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+        
+    config BSP_USING_WWDG
+        bool "Enable WWDG"
+        select RT_USING_WWDG
+        default n
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        select RT_USING_SERIAL
+        default y
+        if BSP_USING_UART
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default y
+
+            config BSP_UART3_RX_USING_DMA
+                bool "Enable UART3 RX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART3_TX_USING_DMA
+                bool "Enable UART3 TX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default n
+		
+            config BSP_USING_UART4
+                bool "Enable UART4"
+                default y
+
+            config BSP_UART4_RX_USING_DMA
+                bool "Enable UART4 RX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_UART4_TX_USING_DMA
+                bool "Enable UART4 TX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+
+        endif
+
+    menuconfig BSP_USING_TIM
+        bool "Enable timer"
+        default n
+        select RT_USING_HWTIMER
+        if BSP_USING_TIM
+            config BSP_USING_TIM14
+                bool "Enable TIM14"
+                default n
+
+            config BSP_USING_TIM16
+                bool "Enable TIM16"
+                default n
+
+            config BSP_USING_TIM17
+                bool "Enable TIM17"
+                default n
+
+        endif
+    menuconfig BSP_USING_LPTIM
+        bool "Enable lptimer"
+        default n
+        select RT_USING_LPTIMER
+        if BSP_USING_LPTIM
+            config BSP_USING_LPTIM1
+                bool "Enable LPTIM1"
+                default n
+        endif
+
+    menuconfig BSP_USING_PWM
+        bool "Enable pwm"
+        default n
+        select RT_USING_PWM
+        if BSP_USING_PWM
+        menuconfig BSP_USING_PWM4
+            bool "Enable timer4 output pwm"
+            default n
+            if BSP_USING_PWM4
+                config BSP_USING_PWM4_CH2
+                    bool "Enable PWM4 channel2"
+                    default n
+            endif
+        endif
+
+    menuconfig BSP_USING_ADC
+        bool "Enable ADC"
+        default n
+        select RT_USING_ADC
+        if BSP_USING_ADC
+            config BSP_USING_ADC2
+                bool "Enable ADC2"
+                default n
+        endif
+
+    menuconfig BSP_USING_DAC
+        bool "Enable DAC"
+        default n
+        select RT_USING_DAC
+        if BSP_USING_DAC
+            config BSP_USING_DAC1
+                bool "Enable DAC1"
+                default n
+        endif
+
+    menuconfig BSP_USING_I2C1
+        bool "Enable I2C1 BUS (software simulation)"
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        default n
+        if BSP_USING_I2C1
+            comment "Notice: PD7 --> 55; PG15 --> 111" 
+            config BSP_I2C1_SCL_PIN
+                int "I2C1 scl pin number"
+                range 1 176
+                default 55
+            config BSP_I2C1_SDA_PIN
+                int "I2C1 sda pin number"
+                range 1 176
+                default 111
+
+        endif
+        
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
+        select RT_USING_SPI
+        default n
+        if BSP_USING_SPI  
+            config BSP_USING_SPI5
+                bool "Enable SPI5 BUS"
+                default n        
+
+            config BSP_SPI5_TX_USING_DMA
+                bool "Enable SPI5 TX DMA"
+                depends on BSP_USING_SPI5
+                default n
+                
+            config BSP_SPI5_RX_USING_DMA
+                bool "Enable SPI5 RX DMA"
+                depends on BSP_USING_SPI5
+                select BSP_SPI5_TX_USING_DMA
+                default n  
+        endif
+
+ source "../libraries/HAL_Drivers/Kconfig"
+    
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+ 
+endmenu

bsp/stm32/stm32mp157a-st-ev1/board/SConscript

@@ -0,0 +1,47 @@
+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+CubeMX_Config/Common/System/system_stm32mp1xx.c
+CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+''')
+
+if GetDepend(['BSP_USING_ADC']):
+    src += Glob('ports/drv_hard_i2c.c')
+    src += Glob('ports/stpmic.c')
+
+if GetDepend(['BSP_USING_DAC']):
+    src += Glob('ports/drv_hard_i2c.c')
+    src += Glob('ports/stpmic.c')
+
+if GetDepend(['BSP_USING_WWDG']):
+    src += Glob('ports/drv_wwdg.c')
+
+if GetDepend(['BSP_USING_LPTIM']):
+    src += Glob('ports/drv_lptim.c')
+
+path =  [cwd]
+path += [cwd + '/CubeMX_Config/CM4/Inc']
+path += [cwd + '/ports']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/gcc/startup_stm32mp15xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/arm/startup_stm32mp15xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/STM32MPxx_HAL/CMSIS/Device/ST/STM32MP1xx/Source/Templates/iar/startup_stm32mp15xx.s']
+
+CPPDEFINES = ['CORE_CM4', 'STM32MP157Axx', 'USE_HAL_DRIVER']
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/stm32/stm32mp157a-st-ev1/board/board.c

@@ -0,0 +1,189 @@
+/*
+* Copyright (c) 2006-2018, RT-Thread Development Team
+*
+* SPDX-License-Identifier: Apache-2.0
+*
+* Change Logs:
+* Date           Author       Notes
+* 2018-11-06     SummerGift   first version
+* 2019-04-09     WillianChan  add stm32f469-st-disco bsp
+* 2020-06-20     thread-liu   add stm32mp157-dk1 bsp
+*/
+
+#include "board.h"
+
+/**
+* @brief System Clock Configuration
+* @retval None
+*/
+void SystemClock_Config(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+    
+    /**Configure LSE Drive Capability
+    */
+    HAL_PWR_EnableBkUpAccess();
+    __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMHIGH);
+    
+    /**Initializes the CPU, AHB and APB busses clocks 
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
+        |RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIG;
+    RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.HSICalibrationValue = 16;
+    RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
+    
+    /**PLL1 Config
+    */
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLL12SOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLM = 3;
+    RCC_OscInitStruct.PLL.PLLN = 81;
+    RCC_OscInitStruct.PLL.PLLP = 1;
+    RCC_OscInitStruct.PLL.PLLQ = 1;
+    RCC_OscInitStruct.PLL.PLLR = 1;
+    RCC_OscInitStruct.PLL.PLLFRACV = 0x800;
+    RCC_OscInitStruct.PLL.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL2 Config
+    */
+    RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL2.PLLSource = RCC_PLL12SOURCE_HSE;
+    RCC_OscInitStruct.PLL2.PLLM = 3;
+    RCC_OscInitStruct.PLL2.PLLN = 66;
+    RCC_OscInitStruct.PLL2.PLLP = 2;
+    RCC_OscInitStruct.PLL2.PLLQ = 1;
+    RCC_OscInitStruct.PLL2.PLLR = 1;
+    RCC_OscInitStruct.PLL2.PLLFRACV = 0x1400;
+    RCC_OscInitStruct.PLL2.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL2.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL2.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL3 Config
+    */
+    RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL3.PLLSource = RCC_PLL3SOURCE_HSE;
+    RCC_OscInitStruct.PLL3.PLLM = 2;
+    RCC_OscInitStruct.PLL3.PLLN = 34;
+    RCC_OscInitStruct.PLL3.PLLP = 2;
+    RCC_OscInitStruct.PLL3.PLLQ = 17;
+    RCC_OscInitStruct.PLL3.PLLR = 37;
+    RCC_OscInitStruct.PLL3.PLLRGE = RCC_PLL3IFRANGE_1;
+    RCC_OscInitStruct.PLL3.PLLFRACV = 0x1A04;
+    RCC_OscInitStruct.PLL3.PLLMODE = RCC_PLL_FRACTIONAL;
+    RCC_OscInitStruct.PLL3.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL3.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    /**PLL4 Config
+    */
+    RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL4.PLLSource = RCC_PLL4SOURCE_HSE;
+    RCC_OscInitStruct.PLL4.PLLM = 4;
+    RCC_OscInitStruct.PLL4.PLLN = 99;
+    RCC_OscInitStruct.PLL4.PLLP = 6;
+    RCC_OscInitStruct.PLL4.PLLQ = 8;
+    RCC_OscInitStruct.PLL4.PLLR = 8;
+    RCC_OscInitStruct.PLL4.PLLRGE = RCC_PLL4IFRANGE_0;
+    RCC_OscInitStruct.PLL4.PLLFRACV = 0;
+    RCC_OscInitStruct.PLL4.PLLMODE = RCC_PLL_INTEGER;
+    RCC_OscInitStruct.PLL4.RPDFN_DIS = RCC_RPDFN_DIS_DISABLED;
+    RCC_OscInitStruct.PLL4.TPDFN_DIS = RCC_TPDFN_DIS_DISABLED;
+    
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /**RCC Clock Config
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
+        |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
+            |RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
+                |RCC_CLOCKTYPE_PCLK5|RCC_CLOCKTYPE_MPU;
+    RCC_ClkInitStruct.MPUInit.MPU_Clock = RCC_MPUSOURCE_PLL1;
+    RCC_ClkInitStruct.MPUInit.MPU_Div = RCC_MPU_DIV2;
+    RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_PLL2;
+    RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
+    RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_PLL3;
+    RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
+    RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV2;
+    RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV4;
+    RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV2;
+    RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV2;
+    RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV2;
+    
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    
+    /**Set the HSE division factor for RTC clock
+    */
+    __HAL_RCC_RTC_HSEDIV(24);
+}
+
+
+/**
+* @brief Peripherals Common Clock Configuration
+* @retval None
+*/
+void PeriphCommonClock_Config(void) {
+    RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+    
+    /** Initializes the common periph clock
+    */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CKPER;
+    PeriphClkInit.CkperClockSelection = RCC_CKPERCLKSOURCE_HSE;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
+        Error_Handler();
+    }
+}
+
+extern void rt_hw_systick_init(void);
+extern int rt_hw_usart_init(void);
+void rt_hw_board_init() 
+{
+    /* HAL_Init() function is called at the beginning of the program */
+    HAL_Init();
+    
+    /* enable interrupt */
+    __set_PRIMASK(0);
+    /* Configure the system clock */
+    if (IS_ENGINEERING_BOOT_MODE()) {
+        /* Configure the system clock */
+        SystemClock_Config();
+    }
+    /* disable interrupt */
+    __set_PRIMASK(1);
+    
+    rt_hw_systick_init();
+    
+    /* Heap initialization */
+#if defined(RT_USING_HEAP)
+    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
+#endif
+    
+    /* Pin driver initialization is open by default */
+#ifdef RT_USING_PIN
+    rt_hw_pin_init();
+#endif
+    
+    /* USART driver initialization is open by default */
+#ifdef RT_USING_SERIAL
+    rt_hw_usart_init();
+#endif
+    
+    /* Set the shell console output device */
+#ifdef RT_USING_CONSOLE
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+    
+    /* Board underlying hardware initialization */
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}

bsp/stm32/stm32mp157a-st-ev1/board/board.h

@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-5      SummerGift   first version
+ * 2019-04-09     WillianChan  add stm32f469-st-disco bsp
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include "stm32mp1xx.h"
+#include "stm32mp1xx_hal.h"
+#include "drv_common.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM32_FLASH_START_ADRESS     ((uint32_t)0x10000000)
+#define STM32_FLASH_SIZE             (256 * 1024)
+#define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
+
+#define STM32_SRAM_SIZE           (128)
+#define STM32_SRAM_END            ((uint32_t)0x10040000 + (STM32_SRAM_SIZE * 1024))
+
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end__;
+#define HEAP_BEGIN       (0x10040000 + 64 * 1024)
+#endif
+
+#define HEAP_END        STM32_SRAM_END
+
+void SystemClock_Config(void);
+
+extern void _Error_Handler(char *s, int num);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+

bsp/stm32/stm32mp157a-st-ev1/board/linker_scripts/link.icf

@@ -0,0 +1,36 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\a_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__  = 0x10000000;
+define symbol __ICFEDIT_region_ROM_end__    = 0x1003FFFF;
+define symbol __ICFEDIT_region_RAM_start__  = 0x10050000;
+define symbol __ICFEDIT_region_RAM_end__    = 0x1005FFFF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x0400;
+define symbol __ICFEDIT_size_heap__   = 0x0000;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+/* Create region for OPENAMP */
+/* !!! These 4 lines can be commented if OPENAMP is not used !!!*/
+define symbol __OPENAMP_region_start__  = 0x10040000;
+define symbol __OPENAMP_region_size__   = 0x8000;
+export symbol __OPENAMP_region_start__;
+export symbol __OPENAMP_region_size__;
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, last block CSTACK};

bsp/stm32/stm32mp157a-st-ev1/board/linker_scripts/link.lds

@@ -0,0 +1,157 @@
+/*
+ * linker script for STM32F4xx with GNU ld
+ * bernard.xiong 2009-10-14
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+  ROM (rx) : ORIGIN = 0x10000000, LENGTH = 256k /* 256KB flash */
+  RAM (rw) : ORIGIN = 0x10040000, LENGTH = 128k /* 128K sram */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x200;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4);
+
+        _etext = .;
+    } > ROM = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > ROM
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >RAM
+
+    .stack : 
+    {
+        . = ALIGN(4);
+        _sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        
+        *(.bss.init)
+    } > RAM
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/stm32/stm32mp157a-st-ev1/board/linker_scripts/link.sct

@@ -0,0 +1,27 @@
+; *************************************************************
+; *** Scatter-Loading Description                           ***
+; *************************************************************
+
+LR_VECTORS 0x00000000 0x00000400  {    ; load region size_region
+  .isr_vector +0 {
+    startup*.o (RESET, +First)
+  }
+}
+
+LR_IROM1 0x10000000 0x00040000  {      ; load region size_region
+  ER_IROM1 0x10000000 0x00040000  {    ; load address = execution address
+    *(InRoot$$Sections)
+    .ANY (+RO)
+    .ANY (+XO)
+  }
+  RW_IRAM1 0x10050000 0x00010000  {    ; RW data
+    .ANY (+RW +ZI)
+  }
+  
+  
+;; *****   Create region for OPENAMP                               *****
+;; ***     These 4 lines can be commented if OPENAMP is not used     *****
+;  .resource_table +0 ALIGN 4 {         ; resource table
+;    *(.resource_table)
+;  }  __OpenAMP_SHMEM__ 0x10040000 EMPTY 0x8000 {} ; Shared Memory area used by OpenAMP
+}

bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_hard_i2c.c

@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-06-18     thread-liu        the first version
+ */
+
+#include <board.h>
+#include "drv_hard_i2c.h"
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.hardi2c"
+#include <drv_log.h>
+
+I2C_HandleTypeDef hI2c4;
+
+int32_t BSP_I2C4_Init(void)
+{
+    int32_t status = RT_EOK;
+
+    if (HAL_I2C_GetState(&hI2c4) == HAL_I2C_STATE_RESET)
+    {
+        if (MX_I2C4_Init(&hI2c4) != HAL_OK)
+        {
+            status = -RT_EBUSY;
+        }
+       /* Init the I2C Msp */
+        if (HAL_I2C_Init(&hI2c4) != HAL_OK)
+        {
+            LOG_D("I2C4 Init Error!\n");
+            status = -RT_EBUSY;
+        } 
+    }
+    return status;
+}
+
+int32_t BSP_I2C4_DeInit(void)
+{
+    int32_t status = RT_EOK;
+    
+    HAL_I2C_MspDeInit(&hI2c4);  
+
+    /* Init the I2C */  
+    if (HAL_I2C_DeInit(&hI2c4) != HAL_OK)
+    {
+        status = -RT_EEMPTY;
+    }
+
+    return status;
+}
+
+HAL_StatusTypeDef MX_I2C4_Init(I2C_HandleTypeDef *hI2c)
+{
+    hI2c4.Instance              = I2C4;   
+    hI2c->Init.Timing           = I2C4_TIMING;
+    hI2c->Init.OwnAddress1      = STPMU1_I2C_ADDRESS;
+    hI2c->Init.AddressingMode   = I2C_ADDRESSINGMODE_7BIT;
+    hI2c->Init.DualAddressMode  = I2C_DUALADDRESS_DISABLE;
+    hI2c->Init.OwnAddress2      = 0;
+    hI2c->Init.OwnAddress2Masks = I2C_OA2_NOMASK;
+    hI2c->Init.GeneralCallMode  = I2C_GENERALCALL_DISABLE;
+    hI2c->Init.NoStretchMode    = I2C_NOSTRETCH_DISABLE;
+  
+    return HAL_I2C_Init(hI2c);
+}
+
+int32_t BSP_I2C4_WriteReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length)
+{
+    return I2C4_WriteReg(DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length);
+}
+
+int32_t BSP_I2C4_ReadReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length)
+{
+    return I2C4_ReadReg(DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length);
+}
+
+int32_t BSP_I2C4_WriteReg16(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length)
+{
+    return I2C4_WriteReg(DevAddr, Reg, I2C_MEMADD_SIZE_16BIT, pData, Length);
+}
+
+int32_t BSP_I2C4_ReadReg16(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length)
+{
+    return I2C4_ReadReg(DevAddr, Reg, I2C_MEMADD_SIZE_16BIT, pData, Length);
+}
+
+int32_t BSP_I2C4_IsReady(uint16_t DevAddr, uint32_t Trials)
+{
+    int32_t status = RT_EOK;
+
+    if(HAL_I2C_IsDeviceReady(&hI2c4, DevAddr, Trials, 1000) != HAL_OK)
+    {
+        status = -RT_EBUSY;
+    }
+
+    return status;
+}
+
+static int32_t I2C4_WriteReg(uint16_t DevAddr, uint16_t Reg, uint16_t MemAddSize, uint8_t *pData, uint16_t Length)
+{  
+    int32_t status = -RT_EIO;
+
+    if(HAL_I2C_Mem_Write(&hI2c4, DevAddr, Reg, MemAddSize, pData, Length, 10000) == HAL_OK)
+    {
+        status = RT_EOK;
+    }
+
+    return status;
+}
+
+static int32_t I2C4_ReadReg(uint16_t DevAddr, uint16_t Reg, uint16_t MemAddSize, uint8_t *pData, uint16_t Length)
+{  
+    int32_t status = -RT_EIO;
+
+    if (HAL_I2C_Mem_Read(&hI2c4, DevAddr, Reg, MemAddSize, pData, Length, 10000) == HAL_OK)
+    {
+        status = RT_EOK;
+    }
+
+    return status;
+}

bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_hard_i2c.h

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-06-18     thread-liu        the first version
+ */
+
+#ifndef __DRV_HARD_I2C_H__
+#define __DRV_HARD_I2C_H__
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STPMU1_I2C_ADDRESS               ((0x33 & 0x7F) << 1)
+
+#ifndef I2C_SPEED
+#define I2C_SPEED                        ((uint32_t)100000)
+#endif /* I2C_SPEED */
+
+#ifndef I2C4_TIMING
+#define I2C4_TIMING                      ((uint32_t)0x10805E89)
+#endif
+
+static int32_t I2C4_WriteReg(uint16_t DevAddr, uint16_t MemAddSize, uint16_t Reg, uint8_t *pData, uint16_t Length);
+static int32_t I2C4_ReadReg(uint16_t DevAddr, uint16_t MemAddSize, uint16_t Reg, uint8_t *pData, uint16_t Length);
+
+int32_t BSP_I2C4_Init(void);
+int32_t BSP_I2C4_DeInit(void);
+int32_t BSP_I2C4_WriteReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length);
+int32_t BSP_I2C4_ReadReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length);
+int32_t BSP_I2C4_WriteReg16(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length);
+int32_t BSP_I2C4_ReadReg16(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length);
+int32_t BSP_I2C4_IsReady(uint16_t DevAddr, uint32_t Trials);
+
+HAL_StatusTypeDef MX_I2C4_Init(I2C_HandleTypeDef *hI2c);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_lptim.c

@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author          Notes
+ * 2020-06-19     thread-liu      first version
+ */
+
+#include <board.h>
+
+#ifdef BSP_USING_LPTIM
+#include "drv_config.h"
+#include <string.h>
+#include <stdlib.h>
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.lptimer"
+#include <drv_log.h>
+
+LPTIM_HandleTypeDef hlptim1;
+
+void LPTIM1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+    
+    HAL_LPTIM_IRQHandler(&hlptim1);
+    
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+    if(hlptim->Instance == LPTIM1)
+    {
+        rt_kprintf("hello rt-thread!\n");
+    }
+}
+
+static int lptim_control(uint8_t pre_value)
+{
+    if(pre_value > 7)
+    {
+       pre_value = 7; 
+    }
+    hlptim1.Instance->CFGR &= ~(7 << 9);      /* clear PRESC[2:0] */
+    hlptim1.Instance->CFGR |= pre_value << 9; /* set PRESC[2:0]  */
+
+    return RT_EOK;
+}
+
+/**
+ * This function initialize the lptim
+ */
+static int lptim_init(void)
+{
+    hlptim1.Instance = LPTIM1;
+    hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
+    hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
+    hlptim1.Init.UltraLowPowerClock.Polarity = LPTIM_CLOCKPOLARITY_RISING;
+    hlptim1.Init.UltraLowPowerClock.SampleTime = LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION;
+    hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
+    hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
+    hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
+    hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
+    hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
+    hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
+    if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
+    {
+        LOG_D("LPTIM Init Error!\n");
+        return -RT_ERROR;
+    }
+  /* ### Start counting in interrupt mode ############################# */
+    if (HAL_LPTIM_Counter_Start_IT(&hlptim1, 5000) != HAL_OK)
+    {
+        LOG_D("LPTIM Start Counting Error!\n");
+        return -RT_ERROR;
+    }
+    
+    return RT_EOK;
+}
+
+static int lptim_deinit()
+{
+   if (HAL_LPTIM_DeInit(&hlptim1) != HAL_OK)
+   {
+        LOG_D("LPTIM Deinit Error!\n");
+        return -RT_ERROR;
+   }
+    
+    return RT_EOK;
+}
+
+static int lptim_sample(int argc, char *argv[])
+{
+    if (argc > 1)
+    {
+        if (!strcmp(argv[1], "run"))
+        { 
+           lptim_init(); 
+        }
+        else if (!strcmp(argv[1], "stop"))
+        {
+            lptim_deinit();
+        }
+        else if (!strcmp(argv[1], "set"))
+        {
+            if (argc > 2)
+            {
+               lptim_control(atoi(argv[2]));
+            }     
+        }
+    }
+    else
+    {
+        rt_kprintf("Usage:\n");
+        rt_kprintf("lptim_sample run            - open lptim, shell will printf 'hello rt-thread'\n");
+        rt_kprintf("lptim_sample set            - set the lptim prescaler, lptim_sample set [0 - 7]\n");
+    }
+
+    return RT_EOK;
+}
+MSH_CMD_EXPORT(lptim_sample, low power timer sample);
+
+#endif

bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_wwdg.c

@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-06-18     thread-liu        the first version
+ */
+
+#include <board.h>
+
+#if defined(BSP_USING_WWDG)
+#include "drv_config.h"
+#include <string.h>
+#include <stdlib.h>
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.wwg"
+#include <drv_log.h>
+
+#define LED5_PIN  GET_PIN(A, 14)
+
+WWDG_HandleTypeDef hwwdg1;  
+
+void WWDG1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+    
+    HAL_WWDG_IRQHandler(&hwwdg1);
+    
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+    static unsigned char led_value = 0x00;
+    
+    led_value = !led_value;
+    
+    if(hwwdg->Instance==WWDG1)
+    {
+        HAL_WWDG_Refresh(&hwwdg1);
+        rt_pin_write(LED5_PIN, led_value);
+    }
+}
+
+static void wwdg_init()
+{
+    rt_pin_mode(LED5_PIN, PIN_MODE_OUTPUT);
+        
+    hwwdg1.Instance       = WWDG1;
+    hwwdg1.Init.Prescaler = WWDG_PRESCALER_8;
+    hwwdg1.Init.Window    = 0X5F;
+    hwwdg1.Init.Counter   = 0x7F;
+    hwwdg1.Init.EWIMode   = WWDG_EWI_ENABLE;
+      
+    if (HAL_WWDG_Init(&hwwdg1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+static void wwdg_control(uint8_t pre_value)
+{
+    if(pre_value > 7)
+    {
+       pre_value = 7; 
+    }
+    hwwdg1.Instance->CFR &= ~(7 << 11);     /* clear WDGTB[2:0] */
+    hwwdg1.Instance->CFR |= pre_value << 11; /* set WDGTB[2:0] */	
+}
+
+static int wwdg_sample(int argc, char *argv[])
+{
+    if (argc > 1)
+    {
+        if (!strcmp(argv[1], "run"))
+        { 
+            wwdg_init();
+        }
+        else if (!strcmp(argv[1], "set"))
+        {
+            if (argc > 2)
+            {
+                wwdg_control(atoi(argv[2]));
+            }     
+        }
+    }
+    else
+    {
+        rt_kprintf("Usage:\n");
+        rt_kprintf("wwdg_sample run            - open wwdg, when feed wwdg in wwdg irq, the LD5 will blink\n");
+        rt_kprintf("wwdg_sample set            - set the wwdg prescaler, wwdg_sample set [0 - 7]\n");
+    }
+
+    return RT_EOK;
+}
+MSH_CMD_EXPORT(wwdg_sample, window watch dog sample);
+
+#endif

bsp/stm32/stm32mp157a-st-ev1/board/ports/stpmic.h

@@ -0,0 +1,315 @@
+/**
+  ******************************************************************************
+  * @file    stm32mp15xx__stpmic1.h
+  * @author  MCD Application Team
+  * @brief   stpmu driver functions used for ST internal validation
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  *
+  ******************************************************************************
+  */
+
+#ifndef __STPMIC_H__
+#define __STPMIC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32mp1xx_hal.h"
+
+/* Exported types ------------------------------------------------------------*/
+typedef enum
+{
+  STPMU1_BUCK1=1,
+  STPMU1_BUCK2,
+  STPMU1_BUCK3,
+  STPMU1_BUCK4,
+  STPMU1_LDO1,
+  STPMU1_LDO2,
+  STPMU1_LDO3,
+  STPMU1_LDO4,
+  STPMU1_LDO5,
+  STPMU1_LDO6,
+  STPMU1_VREFDDR,
+}PMIC_RegulId_TypeDef;
+
+/* IRQ definitions */
+typedef enum {
+
+/* Interrupt Register 1 (0x50 for latch) */
+IT_SWOUT_R,
+IT_SWOUT_F,
+IT_VBUS_OTG_R,
+IT_VBUS_OTG_F,
+IT_WAKEUP_R,
+IT_WAKEUP_F,
+IT_PONKEY_R,
+IT_PONKEY_F,
+
+/* Interrupt Register 2 (0x51 for latch) */
+IT_OVP_BOOST,
+IT_OCP_BOOST,
+IT_OCP_SWOUT,
+IT_OCP_OTG,
+IT_CURLIM_BUCK4,
+IT_CURLIM_BUCK3,
+IT_CURLIM_BUCK2,
+IT_CURLIM_BUCK1,
+
+/* Interrupt Register 3 (0x52 for latch) */
+IT_SHORT_SWOUT,
+IT_SHORT_SWOTG,
+IT_CURLIM_LDO6,
+IT_CURLIM_LDO5,
+IT_CURLIM_LDO4,
+IT_CURLIM_LDO3,
+IT_CURLIM_LDO2,
+IT_CURLIM_LDO1,
+
+/* Interrupt Register 3 (0x52 for latch) */
+IT_SWIN_R,
+IT_SWIN_F,
+IT_RESERVED_1,
+IT_RESERVED_2,
+IT_VINLOW_R,
+IT_VINLOW_F,
+IT_TWARN_R,
+IT_TWARN_F,
+
+IRQ_NR,
+} PMIC_IRQn;
+
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32MP15XX_EVAL_STPMU_Exported_Constants Exported Constants
+  * @{
+  */ 
+
+/* Exported constants --------------------------------------------------------*/
+#define BIT(_x)  (1<<(_x))
+#define STM32_PMIC_NUM_IRQ_REGS       4
+
+#define TURN_ON_REG                 0x1
+#define TURN_OFF_REG                0x2
+#define ICC_LDO_TURN_OFF_REG        0x3
+#define ICC_BUCK_TURN_OFF_REG       0x4
+#define RESET_STATUS_REG            0x5
+#define VERSION_STATUS_REG          0x6
+#define MAIN_CONTROL_REG            0x10
+#define PADS_PULL_REG               0x11
+#define BUCK_PULL_DOWN_REG          0x12
+#define LDO14_PULL_DOWN_REG         0x13
+#define LDO56_PULL_DOWN_REG         0x14
+#define VIN_CONTROL_REG             0x15
+#define PONKEY_TIMER_REG            0x16
+#define MASK_RANK_BUCK_REG          0x17
+#define MASK_RESET_BUCK_REG         0x18
+#define MASK_RANK_LDO_REG           0x19
+#define MASK_RESET_LDO_REG          0x1A
+#define WATCHDOG_CONTROL_REG        0x1B
+#define WATCHDOG_TIMER_REG          0x1C
+#define BUCK_ICC_TURNOFF_REG        0x1D
+#define LDO_ICC_TURNOFF_REG         0x1E
+#define BUCK_APM_CONTROL_REG        0x1F
+#define BUCK1_CONTROL_REG           0x20
+#define BUCK2_CONTROL_REG           0x21
+#define BUCK3_CONTROL_REG           0x22
+#define BUCK4_CONTROL_REG           0x23
+#define VREF_DDR_CONTROL_REG        0x24
+#define LDO1_CONTROL_REG            0x25
+#define LDO2_CONTROL_REG            0x26
+#define LDO3_CONTROL_REG            0x27
+#define LDO4_CONTROL_REG            0x28
+#define LDO5_CONTROL_REG            0x29
+#define LDO6_CONTROL_REG            0x2A
+#define BUCK1_PWRCTRL_REG           0x30
+#define BUCK2_PWRCTRL_REG           0x31
+#define BUCK3_PWRCTRL_REG           0x32
+#define BUCK4_PWRCTRL_REG           0x33
+#define VREF_DDR_PWRCTRL_REG        0x34
+#define LDO1_PWRCTRL_REG            0x35
+#define LDO2_PWRCTRL_REG            0x36
+#define LDO3_PWRCTRL_REG            0x37
+#define LDO4_PWRCTRL_REG            0x38
+#define LDO5_PWRCTRL_REG            0x39
+#define LDO6_PWRCTRL_REG            0x3A
+#define FREQUENCY_SPREADING_REG     0x3B
+#define USB_CONTROL_REG             0x40
+#define ITLATCH1_REG                0x50
+#define ITLATCH2_REG                0x51
+#define ITLATCH3_REG                0x52
+#define ITLATCH4_REG                0x53
+#define ITSETLATCH1_REG             0x60
+#define ITSETLATCH2_REG             0x61
+#define ITSETLATCH3_REG             0x62
+#define ITSETLATCH4_REG             0x63
+#define ITCLEARLATCH1_REG           0x70
+#define ITCLEARLATCH2_REG           0x71
+#define ITCLEARLATCH3_REG           0x72
+#define ITCLEARLATCH4_REG           0x73
+#define ITMASK1_REG                 0x80
+#define ITMASK2_REG                 0x81
+#define ITMASK3_REG                 0x82
+#define ITMASK4_REG                 0x83
+#define ITSETMASK1_REG              0x90
+#define ITSETMASK2_REG              0x91
+#define ITSETMASK3_REG              0x92
+#define ITSETMASK4_REG              0x93
+#define ITCLEARMASK1_REG            0xA0
+#define ITCLEARMASK2_REG            0xA1
+#define ITCLEARMASK3_REG            0xA2
+#define ITCLEARMASK4_REG            0xA3
+#define ITSOURCE1_REG               0xB0
+#define ITSOURCE2_REG               0xB1
+#define ITSOURCE3_REG               0xB2
+#define ITSOURCE4_REG               0xB3
+#define LDO_VOLTAGE_MASK            0x7C
+#define BUCK_VOLTAGE_MASK           0xFC
+#define LDO_BUCK_VOLTAGE_SHIFT      2
+
+#define LDO_ENABLE_MASK             0x01
+#define BUCK_ENABLE_MASK            0x01
+#define BUCK_HPLP_ENABLE_MASK       0x02
+#define LDO_HPLP_ENABLE_MASK        0x02
+#define LDO_BUCK_HPLP_SHIFT         1
+
+#define LDO_BUCK_RANK_MASK          0x01
+#define LDO_BUCK_RESET_MASK         0x01
+#define LDO_BUCK_PULL_DOWN_MASK     0x03
+
+
+/* Main PMIC Control Register 
+ * MAIN_CONTROL_REG
+ * Address : 0x10
+ * */
+#define ICC_EVENT_ENABLED           BIT(4)
+#define PWRCTRL_POLARITY_HIGH       BIT(3)
+#define PWRCTRL_PIN_VALID           BIT(2)
+#define RESTART_REQUEST_ENABLED     BIT(1)
+#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
+
+/* Main PMIC PADS Control Register 
+ * PADS_PULL_REG
+ * Address : 0x11
+ * */
+#define WAKEUP_DETECTOR_DISABLED    BIT(4)
+#define PWRCTRL_PD_ACTIVE           BIT(3)
+#define PWRCTRL_PU_ACTIVE           BIT(2)
+#define WAKEUP_PD_ACTIVE            BIT(1)
+#define PONKEY_PU_ACTIVE            BIT(0)
+
+
+/* Main PMIC VINLOW Control Register 
+ * VIN_CONTROL_REGC DMSC
+ * Address : 0x15
+ * */
+#define SWIN_DETECTOR_ENABLED       BIT(7)
+#define SWOUT_DETECTOR_ENABLED      BIT(6)
+#define VINLOW_HYST_MASK            0x3
+#define VINLOW_HYST_SHIFT           4
+#define VINLOW_THRESHOLD_MASK       0x7
+#define VINLOW_THRESHOLD_SHIFT      1
+#define VINLOW_ENABLED              0x01
+#define VINLOW_CTRL_REG_MASK        0xFF
+
+
+/* USB Control Register 
+ * Address : 0x40
+ * */
+#define BOOST_OVP_DISABLED          BIT(7)
+#define VBUS_OTG_DETECTION_DISABLED BIT(6)
+// Discharge not implemented
+#define OCP_LIMIT_HIGH              BIT(3)
+#define SWIN_SWOUT_ENABLED          BIT(2)
+#define USBSW_OTG_SWITCH_ENABLED    BIT(1)
+
+
+/* IRQ masks */
+/* Interrupt Mask for Register 1 (0x50 for latch) */
+#define IT_SWOUT_R_MASK             BIT(7)
+#define IT_SWOUT_F_MASK             BIT(6)
+#define IT_VBUS_OTG_R_MASK          BIT(5)
+#define IT_VBUS_OTG_F_MASK          BIT(4)
+#define IT_WAKEUP_R_MASK            BIT(3)
+#define IT_WAKEUP_F_MASK            BIT(2)
+#define IT_PONKEY_R_MASK            BIT(1)
+#define IT_PONKEY_F_MASK            BIT(0)
+
+/* Interrupt Mask for Register 2 (0x51 for latch) */
+#define IT_OVP_BOOST_MASK           BIT(7)
+#define IT_OCP_BOOST_MASK           BIT(6)
+#define IT_OCP_SWOUT_MASK           BIT(5)
+#define IT_OCP_OTG_MASK             BIT(4)
+#define IT_CURLIM_BUCK4_MASK        BIT(3)
+#define IT_CURLIM_BUCK3_MASK        BIT(2)
+#define IT_CURLIM_BUCK2_MASK        BIT(1)
+#define IT_CURLIM_BUCK1_MASK        BIT(0)
+
+/* Interrupt Mask for Register 3 (0x52 for latch) */
+#define IT_SHORT_SWOUT_MASK         BIT(7)
+#define IT_SHORT_SWOTG_MASK         BIT(6)
+#define IT_CURLIM_LDO6_MASK         BIT(5)
+#define IT_CURLIM_LDO5_MASK         BIT(4)
+#define IT_CURLIM_LDO4_MASK         BIT(3)
+#define IT_CURLIM_LDO3_MASK         BIT(2)
+#define IT_CURLIM_LDO2_MASK         BIT(1)
+#define IT_CURLIM_LDO1_MASK         BIT(0)
+
+/* Interrupt Mask for Register 4 (0x53 for latch) */
+#define IT_SWIN_R_MASK              BIT(7)
+#define IT_SWIN_F_MASK              BIT(6)
+/*  Reserved 1 */
+/*  Reserved 2 */
+#define IT_VINLOW_R_MASK            BIT(3)
+#define IT_VINLOW_F_MASK            BIT(2)
+#define IT_TWARN_R_MASK             BIT(1)
+#define IT_TWARN_F_MASK             BIT(0)
+
+#define PMIC_VERSION_ID             0x10
+
+#define NVM_SECTOR3_REGISTER_7      0x33
+//#define STPMU1_I2C_ADDRESS          ((NVM_SECTOR3_REGISTER_7 & 0x7F) << 1 )
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup STM32MP15XX_EVAL_STPMU_Exported_Functions Exported Functions
+  * @{
+  */
+
+/* Exported functions --------------------------------------------------------*/
+uint8_t STPMU1_Register_Read(uint8_t register_id);
+void STPMU1_Register_Write(uint8_t register_id, uint8_t value);
+void STPMU1_Register_Update(uint8_t register_id, uint8_t value, uint8_t mask);
+void STPMU1_Enable_Interrupt(PMIC_IRQn IRQn);
+void STPMU1_Disable_Interrupt(PMIC_IRQn IRQn);
+void STPMU1_Regulator_Enable(PMIC_RegulId_TypeDef id);
+void STPMU1_Regulator_Disable(PMIC_RegulId_TypeDef id);
+uint8_t STPMU1_Is_Regulator_Enabled(PMIC_RegulId_TypeDef id);
+void STPMU1_Regulator_Voltage_Set(PMIC_RegulId_TypeDef id,uint16_t milivolts);
+uint32_t BSP_PMIC_Init(void);
+uint32_t BSP_PMIC_DeInit(void);
+uint32_t BSP_PMIC_Is_Device_Ready(void);
+uint32_t BSP_PMIC_InitRegulators (void);
+__weak void BSP_PMIC_INTn_Callback(PMIC_IRQn IRQn);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

bsp/stm32/stm32mp157a-st-ev1/makefile.targets

@@ -0,0 +1,4 @@
+clean2:
+	-$(RM) $(CC_DEPS)$(C++_DEPS)$(C_UPPER_DEPS)$(CXX_DEPS)$(SECONDARY_FLASH)$(SECONDARY_SIZE)$(ASM_DEPS)$(S_UPPER_DEPS)$(C_DEPS)$(CPP_DEPS)
+	-$(RM) $(OBJS) *.elf
+	-@echo ' '

bsp/stm32/stm32mp157a-st-ev1/project.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/stm32/stm32mp157a-st-ev1/project.uvopt

@@ -0,0 +1,167 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>11</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O207 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/stm32/stm32mp157a-st-ev1/project.uvprojx

@@ -0,0 +1,833 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32MP157AAAx:Cortex-M4</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32MP1xx_DFP.1.3.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x10020000,0x00020000) IRAM2(0x10040000,0x00020000) IROM(0x10000000,0x00020000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000)</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD10020000 -FC1000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32MP157AAAx$Drivers\CMSIS\Device\ST\STM32MP1xx\Include\stm32mp157axx_cm4.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32MP157AAAx$SVD\STM32MP157x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>  -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x10020000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x40000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x10050000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>1</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>CORE_CM4, USE_HAL_DRIVER, STM32MP157Axx, RT_USING_ARM_LIBC</Define>
+              <Undefine></Undefine>
+              <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\CM4\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\armlibc;..\..\..\components\libc\compilers\common;..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc;..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include;..\libraries\STM32MPxx_HAL\CMSIS\Core\Include;..\libraries\STM32MPxx_HAL\CMSIS\Include</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>4</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange></TextAddressRange>
+            <DataAddressRange></DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>cpu</GroupName>
+          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>pin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringblk_buf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+            <File>
+              <FileName>system_stm32mp1xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Common\System\system_stm32mp1xx.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\CM4\Src\stm32mp1xx_hal_msp.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32mp15xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Source\Templates\arm\startup_stm32mp15xx.s</FilePath>
+            </File>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\shell.c</FilePath>
+            </File>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
+            </File>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_compiler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_compiler.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_error.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_error.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_heap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_heap.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_init.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_node.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_node.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_ops.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_ops.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_parser.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_parser.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_var.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_var.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_vm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_vm.c</FilePath>
+            </File>
+            <File>
+              <FileName>finsh_token.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\finsh_token.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\clock.c</FilePath>
+            </File>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\components.c</FilePath>
+            </File>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\device.c</FilePath>
+            </File>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\idle.c</FilePath>
+            </File>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
+            </File>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\irq.c</FilePath>
+            </File>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
+            </File>
+            <File>
+              <FileName>memheap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\memheap.c</FilePath>
+            </File>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
+            </File>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\object.c</FilePath>
+            </File>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
+            </File>
+            <File>
+              <FileName>signal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\signal.c</FilePath>
+            </File>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\thread.c</FilePath>
+            </File>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>libc</GroupName>
+          <Files>
+            <File>
+              <FileName>libc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\libc.c</FilePath>
+            </File>
+            <File>
+              <FileName>mem_std.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\mem_std.c</FilePath>
+            </File>
+            <File>
+              <FileName>stubs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\stubs.c</FilePath>
+            </File>
+            <File>
+              <FileName>time.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>STM32_HAL</GroupName>
+          <Files>
+            <File>
+              <FileName>stm32mp1xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_hsem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_hsem.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_exti.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_exti.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_ipcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_ipcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_cortex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dma_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_mdma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_mdma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_pwr_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rcc_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_adc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_adc_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_dac_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_dac_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_i2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_i2c_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_tim_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_tim_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32mp1xx_hal_uart_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart_ex.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
+</Project>

bsp/stm32/stm32mp157a-st-ev1/rtconfig.h

@@ -0,0 +1,175 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 100
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
+#define RT_DEBUG
+#define RT_DEBUG_COLOR
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_MEMHEAP
+#define RT_USING_MEMHEAP_AS_HEAP
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart4"
+#define RT_VER_NUM 0x40003
+#define ARCH_ARM
+#define RT_USING_CPU_FFS
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_ARG_MAX 10
+
+/* Device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
+#define RT_USING_SERIAL
+#define RT_SERIAL_USING_DMA
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_PIN
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_USING_LIBC
+
+/* Network */
+
+/* Socket abstraction layer */
+
+
+/* Network interface device */
+
+
+/* light weight TCP/IP stack */
+
+
+/* AT commands */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+
+/* peripheral libraries and drivers */
+
+
+/* miscellaneous packages */
+
+
+/* samples: kernel and components samples */
+
+#define SOC_FAMILY_STM32
+#define SOC_SERIES_STM32MP1
+
+/* Hardware Drivers Config */
+
+#define SOC_STM32MP157A
+
+/* Onboard Peripheral Drivers */
+
+#define BSP_USING_STLINK_TO_USART
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART4
+
+/* Board extended module Drivers */
+
+
+#endif

bsp/stm32/stm32mp157a-st-ev1/rtconfig.py

@@ -0,0 +1,150 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'C:\Users\XXYYZZ'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iar'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+
+    CXXFLAGS = CFLAGS
+    
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)

bsp/stm32/stm32mp157a-st-ev1/template.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/stm32/stm32mp157a-st-ev1/template.uvopt

@@ -0,0 +1,167 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>11</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O207 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/stm32/stm32mp157a-st-ev1/template.uvoptx

@@ -0,0 +1,192 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FC1000 -FD10020000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U066BFF343339415043223048 -O206 -SF10000 -C0 -A2 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD10050000 -FC1000 -FN0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>0</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>

bsp/stm32/stm32mp157a-st-ev1/template.uvprojx

@@ -0,0 +1,411 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32MP157AAAx:Cortex-M4</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32MP1xx_DFP.1.3.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x10020000,0x00020000) IRAM2(0x10040000,0x00020000) IROM(0x10000000,0x00020000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000)</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD10020000 -FC1000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32MP157AAAx$Drivers\CMSIS\Device\ST\STM32MP1xx\Include\stm32mp157axx_cm4.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32MP157AAAx$SVD\STM32MP157x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>  -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x10020000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x20000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x40000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x10050000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>1</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>4</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange></TextAddressRange>
+            <DataAddressRange></DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source Group 1</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
+</Project>