[bsp][ls1c] update config

bsp/ls1cdev/.config

@@ -68,7 +68,9 @@ CONFIG_RT_USING_COMPONENTS_INIT=y
 # Command shell
 #
 CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
 CONFIG_FINSH_USING_SYMTAB=y
 CONFIG_FINSH_USING_DESCRIPTION=y
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -118,6 +120,7 @@ CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_USING_CAN=y
+CONFIG_RT_CAN_USING_HDR=y
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 CONFIG_RT_USING_I2C=y
@@ -128,6 +131,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
 # CONFIG_RT_USING_W25QXX is not set
 # CONFIG_RT_USING_GD is not set
@@ -148,6 +152,7 @@ CONFIG_RT_USING_SPI=y
 CONFIG_RT_USING_LIBC=y
 CONFIG_RT_USING_PTHREADS=y
 # CONFIG_RT_USING_POSIX is not set
+# CONFIG_HAVE_SYS_SIGNALS is not set
 
 #
 # Network stack
@@ -163,9 +168,7 @@ CONFIG_RT_LWIP_IGMP=y
 CONFIG_RT_LWIP_ICMP=y
 # CONFIG_RT_LWIP_SNMP is not set
 CONFIG_RT_LWIP_DNS=y
-CONFIG_RT_LWIP_DHCP=y
+# CONFIG_RT_LWIP_DHCP is not set
-CONFIG_IP_SOF_BROADCAST=1
-CONFIG_IP_SOF_BROADCAST_RECV=1
 
 #
 # Static IPv4 Address
@@ -197,18 +200,14 @@ CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
 CONFIG_LWIP_SO_RCVBUF=1
+# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
+CONFIG_LWIP_NETIF_LOOPBACK=0
 
 #
 # Modbus master and slave stack
 #
 # CONFIG_RT_USING_MODBUS is not set
 # CONFIG_LWIP_USING_DHCPD is not set
-# CONFIG_RT_USING_NETUTILS is not set
-
-#
-# RT-Thread UI Engine
-#
-# CONFIG_RT_USING_GUIENGINE is not set
 
 #
 # VBUS(Virtual Software BUS)
@@ -276,7 +275,6 @@ CONFIG_LWIP_SO_RCVBUF=1
 # example package: hello
 #
 # CONFIG_PKG_USING_HELLO is not set
-CONFIG_RT_USING_UART=y
 CONFIG_RT_USING_UART2=y
 CONFIG_RT_UART_RX_BUFFER_SIZE=64
 CONFIG_RT_USING_GMAC_INT_MODE=y
@@ -285,6 +283,5 @@ CONFIG_RT_USING_SPI0=y
 CONFIG_RT_USING_SPI1=y
 CONFIG_RT_USING_I2C1=y
 CONFIG_RT_USING_I2C2=y
-CONFIG_RT_CAN_USING_HDR=y
 CONFIG_USING_BXCAN0=y
 CONFIG_USING_BXCAN1=y

bsp/ls1cdev/kconfig

@@ -1,5 +1,6 @@
 mainmenu "RT-Thread Configuration"
 
+
 config $BSP_DIR
     string
     option env="BSP_ROOT"
@@ -18,18 +19,14 @@ config $PKGS_DIR
 source "$RTT_DIR/KConfig"
 source "$PKGS_DIR/KConfig"
 
-config RT_USING_UART
+if RT_USING_SERIAL
-    bool "Using RT_USING_UART"
-    default y
-
-if RT_USING_UART
 config RT_USING_UART2
     bool "Using RT_USING_UART2"
     default y      
 
 config RT_UART_RX_BUFFER_SIZE
     int "The rx buffer size"        
-    default 64 if RT_USING_UART
+    default 64 if RT_USING_SERIAL
     default 64 
 endif  
 
@@ -42,39 +39,41 @@ config RT_USING_FPU
     default y
 	
 config RT_USING_SPI0
-    bool "Using RT_USING_SPI0"
+    bool "Enable SPI0"
 	select RT_USING_SPI
     default y      
 
 config RT_USING_SPI1
-    bool "Using RT_USING_SPI1"
+    bool "Enable SPI1"
 	select RT_USING_SPI
     default y      
 	
+if RT_USING_I2C
 config RT_USING_I2C1
-    bool "Using RT_USING_I2C1"
+    bool "Enable I2C1"
-	select RT_USING_I2C
     default y
 	
 config RT_USING_I2C2
-    bool "Using RT_USING_I2C2"
+    bool "Enable I2C2"  
-	select RT_USING_I2C
     default y 
+endif
 
-config RT_CAN_USING_HDR
-    bool "Using RT_CAN_USING_HDR"
-	select RT_USING_CAN
-    default y      
 	
 config USING_BXCAN0
-    bool "Using USING_BXCAN0"
+    bool "Enable CAN0"
 	select RT_USING_CAN
     default y      
   
 config USING_BXCAN1
-    bool "Using USING_BXCAN1"
+    bool "Enable CAN1"
 	select RT_USING_CAN
     default y      
 
+if RT_USING_CAN
+config RT_CAN_USING_HDR
+    bool "Using RT_CAN_USING_HDR"
+	select RT_USING_CAN
+    default y  
+endif