Merge pull request #2610 from jhbdream/stm32l4r9-bsp

add bsp for stm32l4r9
This commit is contained in:
Bernard Xiong 2019-04-29 13:50:00 +08:00 committed by GitHub
commit 3ae69adf9e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
25 changed files with 2924 additions and 319 deletions

View File

@ -27,7 +27,8 @@ if GetDepend(['RT_USING_QSPI']):
src += ['drv_qspi.c']
if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):
src += ['drv_soft_i2c.c']
if GetDepend('BSP_USING_I2C1') or GetDepend('BSP_USING_I2C2') or GetDepend('BSP_USING_I2C3') or GetDepend('BSP_USING_I2C4'):
src += ['drv_soft_i2c.c']
if GetDepend('RT_USING_LWIP'):
src += ['drv_eth.c']

View File

@ -756,6 +756,9 @@ int rt_hw_pin_init(void)
#endif
#if defined(__HAL_RCC_GPIOG_CLK_ENABLE)
#ifdef SOC_SERIES_STM32L4
HAL_PWREx_EnableVddIO2();
#endif
__HAL_RCC_GPIOG_CLK_ENABLE();
#endif

View File

@ -23,7 +23,6 @@ STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c
STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c
STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c
STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rng.c
STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_sram.c
''')
if GetDepend(['RT_USING_PIN']):
@ -90,6 +89,24 @@ if GetDepend(['BSP_USING_ON_CHIP_FLASH']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c']
if GetDepend(['BSP_USING_FMC']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_fmc.c']
if GetDepend(['BSP_USING_GFXMMU']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gfxmmu.c']
if GetDepend(['BSP_USING_DSI']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dsi.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma2d.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_dma2d.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_ltdc.c']
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_ltdc_ex.c']
if GetDepend(['BSP_USING_SRAM']):
src += ['STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_sram.c']
path = [cwd + '/STM32L4xx_HAL_Driver/Inc',
cwd + '/CMSIS/Device/ST/STM32L4xx/Include',
cwd + '/CMSIS/Include']

View File

@ -48,11 +48,11 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
# CONFIG_RT_USING_MEMHEAP is not set
CONFIG_RT_USING_MEMHEAP=y
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SMALL_MEM is not set
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_MEMHEAP_AS_HEAP=y
CONFIG_RT_USING_HEAP=y
#
@ -119,7 +119,8 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
CONFIG_RT_USING_I2C=y
CONFIG_RT_USING_I2C_BITOPS=y
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_PWM is not set
@ -160,6 +161,11 @@ CONFIG_RT_USING_PIN=y
#
# CONFIG_RT_USING_SAL is not set
#
# Network interface device
#
# CONFIG_RT_USING_NETDEV is not set
#
# light weight TCP/IP stack
#
@ -193,32 +199,20 @@ CONFIG_RT_USING_PIN=y
# RT-Thread online packages
#
#
# system packages
#
#
# RT-Thread GUI Engine
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_PERSIMMON is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
#
# IoT - internet of things
#
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_WEBCLIENT is not set
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LIBMODBUS is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
#
# Wi-Fi
@ -233,9 +227,23 @@ CONFIG_RT_USING_PIN=y
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_RW007 is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
# CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
#
# security packages
@ -247,6 +255,7 @@ CONFIG_RT_USING_PIN=y
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
@ -254,27 +263,86 @@ CONFIG_RT_USING_PIN=y
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
# CONFIG_PKG_USING_STEMWIN is not set
#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_IPERF is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
# CONFIG_PKG_USING_ADBD is not set
#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_PERSIMMON is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
# CONFIG_PKG_USING_THREAD_POOL is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_SX12XX is not set
# CONFIG_PKG_USING_SIGNAL_LED is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_AT24CXX is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
#
# example package: hello
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_NNOM is not set
CONFIG_SOC_FAMILY_STM32=y
CONFIG_SOC_SERIES_STM32L4=y
@ -286,6 +354,13 @@ CONFIG_SOC_STM32L4R9AI=y
#
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_STLINK_TO_USART=y
# CONFIG_BSP_USING_DSI is not set
#
# Enable Touch
#
# CONFIG_BSP_USING_TOUCH is not set
#
# On-chip Peripheral Drivers
@ -293,6 +368,10 @@ CONFIG_SOC_STM32L4R9AI=y
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART3=y
# CONFIG_BSP_USING_SRAM is not set
# CONFIG_BSP_USING_I2C1 is not set
# CONFIG_BSP_USING_GFXMMU is not set
# CONFIG_BSP_USING_FMC is not set
#
# Board extended module Drivers

View File

@ -2,7 +2,7 @@
## 简介
STM32L4R9I-EVAL 开发板提供的 BSP (板级支持包) 说明。
由 JHB 为 STM32L4R9I-EVAL 开发板提供的 BSP (板级支持包) 说明。
主要内容如下:
@ -34,12 +34,19 @@ STM32L4R9I-EVAL 开发板提供的 BSP (板级支持包) 说明。
本 BSP 目前对外设的支持情况如下:
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- |
| 板载 ST-LINK 转串口 | 支持 | PB10 PB11 USART3 | |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
| UART | 支持 | USART3 |
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :-----------------------------------------|
| 板载 ST-LINK 转串口 | 支持 | PB10 PB11 USART3 |
| LCD | 支持 | DSI mode round lcd |
| TOUCH | 支持 | touch for round lcd |
| SRAM | 支持 | |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | |
| UART | 支持 | USART3 |
## 使用说明
@ -99,12 +106,12 @@ msh >
- 调试串口为串口3 映射到PB10 PB11
- RAM 分为三部分
- stm32L4R9 共有三块内部RAM区域 具体使用情况入如下
```
RAM1 (rw) : ORIGIN = 0x20000000, LENGTH = 192k /* 192K sram 用于程序定义全局变量 静态变量存放*/
RAM2 (rw) : ORIGIN = 0x10000000, LENGTH = 64k /* 64K sram 用于程序定义全局变量 静态变量存放 */
RAM3 (rw) : ORIGIN = 0x20040000, LENGTH = 384k /* 384K sram 用于heap*/
RAM2 (rw) : ORIGIN = 0x10000000, LENGTH = 64k /* 64K sram 用于程序定义全局变量 静态变量存放 */
RAM3 (rw) : ORIGIN = 0x20040000, LENGTH = 384k /* 384K sram 用于heap空间*/
```

File diff suppressed because one or more lines are too long

View File

@ -1,22 +1,91 @@
#MicroXplorer Configuration settings - do not modify
DSIHOST_CKN.Mode=DSIHost_Standalone
DSIHOST_CKN.Signal=DSIHOST_CKN
DSIHOST_CKP.Mode=DSIHost_Standalone
DSIHOST_CKP.Signal=DSIHOST_CKP
DSIHOST_D0N.Mode=DSIHost_Standalone
DSIHOST_D0N.Signal=DSIHOST_D0N
DSIHOST_D0P.Mode=DSIHost_Standalone
DSIHOST_D0P.Signal=DSIHOST_D0P
DSIHOST_D1N.Mode=DSIHost_Standalone
DSIHOST_D1N.Signal=DSIHOST_D1N
DSIHOST_D1P.Mode=DSIHost_Standalone
DSIHOST_D1P.Signal=DSIHOST_D1P
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32L4
Mcu.IP0=LTDC
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IP4=USART3
Mcu.IPNb=5
Mcu.IP0=DMA2D
Mcu.IP1=DSIHOST
Mcu.IP2=FMC
Mcu.IP3=GFXMMU
Mcu.IP4=LTDC
Mcu.IP5=NVIC
Mcu.IP6=RCC
Mcu.IP7=SYS
Mcu.IP8=USART3
Mcu.IPNb=9
Mcu.Name=STM32L4R9A(G-I)Ix
Mcu.Package=UFBGA169
Mcu.Pin0=PH0-OSC_IN (PH0)
Mcu.Pin1=PB11
Mcu.Pin2=PH1-OSC_OUT (PH1)
Mcu.Pin3=PB10
Mcu.Pin4=VP_LTDC_DSIMode
Mcu.Pin5=VP_SYS_VS_Systick
Mcu.PinsNb=6
Mcu.Pin0=PE0
Mcu.Pin1=PE1
Mcu.Pin10=PF2
Mcu.Pin11=PF1
Mcu.Pin12=PF0
Mcu.Pin13=PD7
Mcu.Pin14=PC15-OSC32_OUT (PC15)
Mcu.Pin15=PF3
Mcu.Pin16=PF4
Mcu.Pin17=PF5
Mcu.Pin18=PG4
Mcu.Pin19=PG3
Mcu.Pin2=PD0
Mcu.Pin20=PG5
Mcu.Pin21=PH0-OSC_IN (PH0)
Mcu.Pin22=PG1
Mcu.Pin23=PE10
Mcu.Pin24=PB11
Mcu.Pin25=PD13
Mcu.Pin26=PG2
Mcu.Pin27=PD15
Mcu.Pin28=PD14
Mcu.Pin29=PH1-OSC_OUT (PH1)
Mcu.Pin3=PD4
Mcu.Pin30=PG0
Mcu.Pin31=PE9
Mcu.Pin32=PE15
Mcu.Pin33=PD12
Mcu.Pin34=PD11
Mcu.Pin35=PD10
Mcu.Pin36=DSIHOST_D1P
Mcu.Pin37=DSIHOST_D1N
Mcu.Pin38=PF15
Mcu.Pin39=PE8
Mcu.Pin4=PD1
Mcu.Pin40=PE14
Mcu.Pin41=PD9
Mcu.Pin42=PD8
Mcu.Pin43=DSIHOST_CKP
Mcu.Pin44=DSIHOST_CKN
Mcu.Pin45=PF14
Mcu.Pin46=PE7
Mcu.Pin47=PE13
Mcu.Pin48=DSIHOST_D0P
Mcu.Pin49=DSIHOST_D0N
Mcu.Pin5=PE4
Mcu.Pin50=PF13
Mcu.Pin51=PE12
Mcu.Pin52=PF12
Mcu.Pin53=PE11
Mcu.Pin54=PB10
Mcu.Pin55=VP_DMA2D_VS_DMA2D
Mcu.Pin56=VP_GFXMMU_VS_GFXMMU
Mcu.Pin57=VP_LTDC_DSIMode
Mcu.Pin58=VP_SYS_VS_Systick
Mcu.Pin6=PE3
Mcu.Pin7=PD5
Mcu.Pin8=PE5
Mcu.Pin9=PC14-OSC32_IN (PC14)
Mcu.PinsNb=59
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32L4R9AIIx
@ -38,6 +107,10 @@ PB10.Signal=USART3_TX
PB11.Locked=true
PB11.Mode=Asynchronous
PB11.Signal=USART3_RX
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
PCC.Checker=true
PCC.Line=STM32L4R9/S9
PCC.MCU=STM32L4R9A(G-I)Ix
@ -46,6 +119,52 @@ PCC.Seq0=0
PCC.Series=STM32L4
PCC.Temperature=25
PCC.Vdd=null
PD0.Signal=FMC_D2_DA2
PD1.Signal=FMC_D3_DA3
PD10.Signal=FMC_D15_DA15
PD11.Signal=FMC_A16_CLE
PD12.Signal=FMC_A17_ALE
PD13.Signal=FMC_A18
PD14.Signal=FMC_D0_DA0
PD15.Signal=FMC_D1_DA1
PD4.Signal=FMC_NOE
PD5.Signal=FMC_NWE
PD7.Mode=NorPsramChipSelect1_1
PD7.Signal=FMC_NE1
PD8.Signal=FMC_D13_DA13
PD9.Signal=FMC_D14_DA14
PE0.Locked=true
PE0.Signal=FMC_NBL0
PE1.Locked=true
PE1.Signal=FMC_NBL1
PE10.Signal=FMC_D7_DA7
PE11.Signal=FMC_D8_DA8
PE12.Signal=FMC_D9_DA9
PE13.Signal=FMC_D10_DA10
PE14.Signal=FMC_D11_DA11
PE15.Signal=FMC_D12_DA12
PE3.Signal=FMC_A19
PE4.Signal=FMC_A20
PE5.Signal=FMC_A21
PE7.Signal=FMC_D4_DA4
PE8.Signal=FMC_D5_DA5
PE9.Signal=FMC_D6_DA6
PF0.Signal=FMC_A0
PF1.Signal=FMC_A1
PF12.Signal=FMC_A6
PF13.Signal=FMC_A7
PF14.Signal=FMC_A8
PF15.Signal=FMC_A9
PF2.Signal=FMC_A2
PF3.Signal=FMC_A3
PF4.Signal=FMC_A4
PF5.Signal=FMC_A5
PG0.Signal=FMC_A10
PG1.Signal=FMC_A11
PG2.Signal=FMC_A12
PG3.Signal=FMC_A13
PG4.Signal=FMC_A14
PG5.Signal=FMC_A15
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
@ -78,7 +197,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART3_UART_Init-USART3-false-HAL-true,4-MX_LTDC_Init-LTDC-false-HAL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART3_UART_Init-USART3-false-HAL-true,4-MX_LTDC_Init-LTDC-false-HAL-true,5-MX_FMC_Init-FMC-false-HAL-true,6-MX_DMA2D_Init-DMA2D-false-HAL-true,7-MX_DSIHOST_DSI_Init-DSIHOST-false-HAL-true,8-MX_GFXMMU_Init-GFXMMU-false-HAL-true
RCC.ADCFreq_Value=64000000
RCC.AHBFreq_Value=120000000
RCC.APB1Freq_Value=120000000
@ -88,9 +207,9 @@ RCC.APB2TimFreq_Value=120000000
RCC.CRSFreq_Value=48000000
RCC.CortexFreq_Value=120000000
RCC.DFSDMFreq_Value=120000000
RCC.DSIFreq_Value=40000000
RCC.DSIRXEscFreq_Value=40000000
RCC.DSITXEscFreq_Value=10000000
RCC.DSIFreq_Value=20000000
RCC.DSIRXEscFreq_Value=20000000
RCC.DSITXEscFreq_Value=5000000
RCC.FCLKCortexFreq_Value=120000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=120000000
@ -101,20 +220,21 @@ RCC.I2C1Freq_Value=120000000
RCC.I2C2Freq_Value=120000000
RCC.I2C3Freq_Value=120000000
RCC.I2C4Freq_Value=120000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CRSFreq_Value,CortexFreq_Value,DFSDMFreq_Value,DSIFreq_Value,DSIRXEscFreq_Value,DSITXEscFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LCDTFTFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,OCTOSPIMFreq_Value,PLLDSIFreq_Value,PLLDSIVCOFreq_Value,PLLM1,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2QoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
RCC.LCDTFTFreq_Value=32000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CRSFreq_Value,CortexFreq_Value,DFSDMFreq_Value,DSIFreq_Value,DSIRXEscFreq_Value,DSITXEscFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LCDTFTFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,OCTOSPIMFreq_Value,PLLDSIFreq_Value,PLLDSIODF,PLLDSIVCOFreq_Value,PLLM1,PLLM3,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2QoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
RCC.LCDTFTFreq_Value=16000000
RCC.LPTIM1Freq_Value=120000000
RCC.LPTIM2Freq_Value=120000000
RCC.LPUART1Freq_Value=120000000
RCC.LSCOPinFreq_Value=32000
RCC.LSE_VALUE=32768
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=120000000
RCC.MSI_VALUE=4000000
RCC.OCTOSPIMFreq_Value=120000000
RCC.PLLDSIFreq_Value=320000000
RCC.PLLDSIFreq_Value=160000000
RCC.PLLDSIODF=DSI_PLL_OUT_DIV2
RCC.PLLDSIVCOFreq_Value=640000000
RCC.PLLM1=2
RCC.PLLM3=2
RCC.PLLN=30
RCC.PLLPoutputFreq_Value=120000000
RCC.PLLQoutputFreq_Value=120000000
@ -122,9 +242,9 @@ RCC.PLLRCLKFreq_Value=120000000
RCC.PLLSAI1PoutputFreq_Value=64000000
RCC.PLLSAI1QoutputFreq_Value=64000000
RCC.PLLSAI1RoutputFreq_Value=64000000
RCC.PLLSAI2PoutputFreq_Value=64000000
RCC.PLLSAI2QoutputFreq_Value=64000000
RCC.PLLSAI2RoutputFreq_Value=64000000
RCC.PLLSAI2PoutputFreq_Value=32000000
RCC.PLLSAI2QoutputFreq_Value=32000000
RCC.PLLSAI2RoutputFreq_Value=32000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.PWRFreq_Value=120000000
RCC.RNGFreq_Value=64000000
@ -140,13 +260,101 @@ RCC.USART2Freq_Value=120000000
RCC.USART3Freq_Value=120000000
RCC.USBFreq_Value=64000000
RCC.VCOInput2Freq_Value=16000000
RCC.VCOInput3Freq_Value=16000000
RCC.VCOInput3Freq_Value=8000000
RCC.VCOInputFreq_Value=8000000
RCC.VCOOutputFreq_Value=240000000
RCC.VCOSAI1OutputFreq_Value=128000000
RCC.VCOSAI2OutputFreq_Value=128000000
RCC.VCOSAI2OutputFreq_Value=64000000
SH.FMC_A0.0=FMC_A0,22b-a1
SH.FMC_A0.ConfNb=1
SH.FMC_A1.0=FMC_A1,22b-a1
SH.FMC_A1.ConfNb=1
SH.FMC_A10.0=FMC_A10,22b-a1
SH.FMC_A10.ConfNb=1
SH.FMC_A11.0=FMC_A11,22b-a1
SH.FMC_A11.ConfNb=1
SH.FMC_A12.0=FMC_A12,22b-a1
SH.FMC_A12.ConfNb=1
SH.FMC_A13.0=FMC_A13,22b-a1
SH.FMC_A13.ConfNb=1
SH.FMC_A14.0=FMC_A14,22b-a1
SH.FMC_A14.ConfNb=1
SH.FMC_A15.0=FMC_A15,22b-a1
SH.FMC_A15.ConfNb=1
SH.FMC_A16_CLE.0=FMC_A16,22b-a1
SH.FMC_A16_CLE.ConfNb=1
SH.FMC_A17_ALE.0=FMC_A17,22b-a1
SH.FMC_A17_ALE.ConfNb=1
SH.FMC_A18.0=FMC_A18,22b-a1
SH.FMC_A18.ConfNb=1
SH.FMC_A19.0=FMC_A19,22b-a1
SH.FMC_A19.ConfNb=1
SH.FMC_A2.0=FMC_A2,22b-a1
SH.FMC_A2.ConfNb=1
SH.FMC_A20.0=FMC_A20,22b-a1
SH.FMC_A20.ConfNb=1
SH.FMC_A21.0=FMC_A21,22b-a1
SH.FMC_A21.ConfNb=1
SH.FMC_A3.0=FMC_A3,22b-a1
SH.FMC_A3.ConfNb=1
SH.FMC_A4.0=FMC_A4,22b-a1
SH.FMC_A4.ConfNb=1
SH.FMC_A5.0=FMC_A5,22b-a1
SH.FMC_A5.ConfNb=1
SH.FMC_A6.0=FMC_A6,22b-a1
SH.FMC_A6.ConfNb=1
SH.FMC_A7.0=FMC_A7,22b-a1
SH.FMC_A7.ConfNb=1
SH.FMC_A8.0=FMC_A8,22b-a1
SH.FMC_A8.ConfNb=1
SH.FMC_A9.0=FMC_A9,22b-a1
SH.FMC_A9.ConfNb=1
SH.FMC_D0_DA0.0=FMC_D0,16b-d1
SH.FMC_D0_DA0.ConfNb=1
SH.FMC_D10_DA10.0=FMC_D10,16b-d1
SH.FMC_D10_DA10.ConfNb=1
SH.FMC_D11_DA11.0=FMC_D11,16b-d1
SH.FMC_D11_DA11.ConfNb=1
SH.FMC_D12_DA12.0=FMC_D12,16b-d1
SH.FMC_D12_DA12.ConfNb=1
SH.FMC_D13_DA13.0=FMC_D13,16b-d1
SH.FMC_D13_DA13.ConfNb=1
SH.FMC_D14_DA14.0=FMC_D14,16b-d1
SH.FMC_D14_DA14.ConfNb=1
SH.FMC_D15_DA15.0=FMC_D15,16b-d1
SH.FMC_D15_DA15.ConfNb=1
SH.FMC_D1_DA1.0=FMC_D1,16b-d1
SH.FMC_D1_DA1.ConfNb=1
SH.FMC_D2_DA2.0=FMC_D2,16b-d1
SH.FMC_D2_DA2.ConfNb=1
SH.FMC_D3_DA3.0=FMC_D3,16b-d1
SH.FMC_D3_DA3.ConfNb=1
SH.FMC_D4_DA4.0=FMC_D4,16b-d1
SH.FMC_D4_DA4.ConfNb=1
SH.FMC_D5_DA5.0=FMC_D5,16b-d1
SH.FMC_D5_DA5.ConfNb=1
SH.FMC_D6_DA6.0=FMC_D6,16b-d1
SH.FMC_D6_DA6.ConfNb=1
SH.FMC_D7_DA7.0=FMC_D7,16b-d1
SH.FMC_D7_DA7.ConfNb=1
SH.FMC_D8_DA8.0=FMC_D8,16b-d1
SH.FMC_D8_DA8.ConfNb=1
SH.FMC_D9_DA9.0=FMC_D9,16b-d1
SH.FMC_D9_DA9.ConfNb=1
SH.FMC_NBL0.0=FMC_NBL0
SH.FMC_NBL0.ConfNb=1
SH.FMC_NBL1.0=FMC_NBL1
SH.FMC_NBL1.ConfNb=1
SH.FMC_NOE.0=FMC_NOE,Sram1
SH.FMC_NOE.ConfNb=1
SH.FMC_NWE.0=FMC_NWE,Sram1
SH.FMC_NWE.ConfNb=1
USART3.IPParameters=VirtualMode-Asynchronous
USART3.VirtualMode-Asynchronous=VM_ASYNC
VP_DMA2D_VS_DMA2D.Mode=DMA2D_Activate
VP_DMA2D_VS_DMA2D.Signal=DMA2D_VS_DMA2D
VP_GFXMMU_VS_GFXMMU.Mode=GFXMMU_Activate
VP_GFXMMU_VS_GFXMMU.Signal=GFXMMU_VS_GFXMMU
VP_LTDC_DSIMode.Mode=RGB888
VP_LTDC_DSIMode.Signal=LTDC_DSIMode
VP_SYS_VS_Systick.Mode=SysTick

View File

@ -57,17 +57,17 @@
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_DAC_MODULE_ENABLED */
/*#define HAL_DCMI_MODULE_ENABLED */
/*#define HAL_DMA2D_MODULE_ENABLED */
#define HAL_DMA2D_MODULE_ENABLED
/*#define HAL_DFSDM_MODULE_ENABLED */
/*#define HAL_DSI_MODULE_ENABLED */
#define HAL_DSI_MODULE_ENABLED
/*#define HAL_FIREWALL_MODULE_ENABLED */
/*#define HAL_GFXMMU_MODULE_ENABLED */
#define HAL_GFXMMU_MODULE_ENABLED
/*#define HAL_HCD_MODULE_ENABLED */
/*#define HAL_HASH_MODULE_ENABLED */
/*#define HAL_I2S_MODULE_ENABLED */
/*#define HAL_IRDA_MODULE_ENABLED */
/*#define HAL_IWDG_MODULE_ENABLED */
/*#define HAL_LTDC_MODULE_ENABLED */
#define HAL_LTDC_MODULE_ENABLED
/*#define HAL_LCD_MODULE_ENABLED */
/*#define HAL_LPTIM_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
@ -85,7 +85,7 @@
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
/*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */
#define HAL_SRAM_MODULE_ENABLED
/*#define HAL_SWPMI_MODULE_ENABLED */
/*#define HAL_TIM_MODULE_ENABLED */
/*#define HAL_TSC_MODULE_ENABLED */

View File

@ -6,7 +6,7 @@
******************************************************************************
** This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
@ -40,6 +40,7 @@
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "gfxmmu_lut.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
@ -62,8 +63,18 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
DMA2D_HandleTypeDef hdma2d;
DSI_HandleTypeDef hdsi;
GFXMMU_HandleTypeDef hgfxmmu;
LTDC_HandleTypeDef hltdc;
UART_HandleTypeDef huart3;
SRAM_HandleTypeDef hsram1;
/* USER CODE BEGIN PV */
/* USER CODE END PV */
@ -72,6 +83,11 @@ UART_HandleTypeDef huart3;
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART3_UART_Init(void);
static void MX_LTDC_Init(void);
static void MX_FMC_Init(void);
static void MX_DMA2D_Init(void);
static void MX_DSIHOST_DSI_Init(void);
static void MX_GFXMMU_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@ -87,42 +103,47 @@ static void MX_USART3_UART_Init(void);
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART3_UART_Init();
/* USER CODE BEGIN 2 */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART3_UART_Init();
MX_LTDC_Init();
MX_FMC_Init();
MX_DMA2D_Init();
MX_DSIHOST_DSI_Init();
MX_GFXMMU_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
@ -131,50 +152,318 @@ int main(void)
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 2;
RCC_OscInitStruct.PLL.PLLN = 30;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
/**Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 2;
RCC_OscInitStruct.PLL.PLLN = 30;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART3|RCC_PERIPHCLK_DSI
|RCC_PERIPHCLK_LTDC;
PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1;
PeriphClkInit.DsiClockSelection = RCC_DSICLKSOURCE_DSIPHY;
PeriphClkInit.LtdcClockSelection = RCC_LTDCCLKSOURCE_PLLSAI2_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2Source = RCC_PLLSOURCE_HSE;
PeriphClkInit.PLLSAI2.PLLSAI2M = 2;
PeriphClkInit.PLLSAI2.PLLSAI2N = 8;
PeriphClkInit.PLLSAI2.PLLSAI2P = RCC_PLLP_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2R = RCC_PLLR_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2Q = RCC_PLLQ_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2ClockOut = RCC_PLLSAI2_LTDCCLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief DMA2D Initialization Function
* @param None
* @retval None
*/
static void MX_DMA2D_Init(void)
{
/* USER CODE BEGIN DMA2D_Init 0 */
/* USER CODE END DMA2D_Init 0 */
/* USER CODE BEGIN DMA2D_Init 1 */
/* USER CODE END DMA2D_Init 1 */
hdma2d.Instance = DMA2D;
hdma2d.Init.Mode = DMA2D_M2M;
hdma2d.Init.ColorMode = DMA2D_OUTPUT_ARGB8888;
hdma2d.Init.OutputOffset = 0;
hdma2d.Init.BytesSwap = DMA2D_BYTES_REGULAR;
hdma2d.Init.LineOffsetMode = DMA2D_LOM_PIXELS;
hdma2d.LayerCfg[1].InputOffset = 0;
hdma2d.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888;
hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
hdma2d.LayerCfg[1].InputAlpha = 0;
hdma2d.LayerCfg[1].AlphaInverted = DMA2D_REGULAR_ALPHA;
hdma2d.LayerCfg[1].RedBlueSwap = DMA2D_RB_REGULAR;
if (HAL_DMA2D_Init(&hdma2d) != HAL_OK)
{
Error_Handler();
}
if (HAL_DMA2D_ConfigLayer(&hdma2d, 1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN DMA2D_Init 2 */
/* USER CODE END DMA2D_Init 2 */
}
/**
* @brief DSIHOST Initialization Function
* @param None
* @retval None
*/
static void MX_DSIHOST_DSI_Init(void)
{
/* USER CODE BEGIN DSIHOST_Init 0 */
/* USER CODE END DSIHOST_Init 0 */
DSI_PLLInitTypeDef PLLInit = {0};
DSI_HOST_TimeoutTypeDef HostTimeouts = {0};
DSI_PHY_TimerTypeDef PhyTimings = {0};
DSI_LPCmdTypeDef LPCmd = {0};
/* USER CODE BEGIN DSIHOST_Init 1 */
/* USER CODE END DSIHOST_Init 1 */
hdsi.Instance = DSI;
hdsi.Init.AutomaticClockLaneControl = DSI_AUTO_CLK_LANE_CTRL_DISABLE;
hdsi.Init.TXEscapeCkdiv = 4;
hdsi.Init.NumberOfLanes = DSI_ONE_DATA_LANE;
PLLInit.PLLNDIV = 20;
PLLInit.PLLIDF = DSI_PLL_IN_DIV1;
PLLInit.PLLODF = DSI_PLL_OUT_DIV2;
if (HAL_DSI_Init(&hdsi, &PLLInit) != HAL_OK)
{
Error_Handler();
}
HostTimeouts.TimeoutCkdiv = 1;
HostTimeouts.HighSpeedTransmissionTimeout = 0;
HostTimeouts.LowPowerReceptionTimeout = 0;
HostTimeouts.HighSpeedReadTimeout = 0;
HostTimeouts.LowPowerReadTimeout = 0;
HostTimeouts.HighSpeedWriteTimeout = 0;
HostTimeouts.HighSpeedWritePrespMode = DSI_HS_PM_DISABLE;
HostTimeouts.LowPowerWriteTimeout = 0;
HostTimeouts.BTATimeout = 0;
if (HAL_DSI_ConfigHostTimeouts(&hdsi, &HostTimeouts) != HAL_OK)
{
Error_Handler();
}
PhyTimings.ClockLaneHS2LPTime = 17;
PhyTimings.ClockLaneLP2HSTime = 12;
PhyTimings.DataLaneHS2LPTime = 8;
PhyTimings.DataLaneLP2HSTime = 8;
PhyTimings.DataLaneMaxReadTime = 0;
PhyTimings.StopWaitTime = 0;
if (HAL_DSI_ConfigPhyTimer(&hdsi, &PhyTimings) != HAL_OK)
{
Error_Handler();
}
if (HAL_DSI_ConfigFlowControl(&hdsi, DSI_FLOW_CONTROL_BTA) != HAL_OK)
{
Error_Handler();
}
if (HAL_DSI_SetLowPowerRXFilter(&hdsi, 10000) != HAL_OK)
{
Error_Handler();
}
if (HAL_DSI_ConfigErrorMonitor(&hdsi, HAL_DSI_ERROR_NONE) != HAL_OK)
{
Error_Handler();
}
LPCmd.LPGenShortWriteNoP = DSI_LP_GSW0P_DISABLE;
LPCmd.LPGenShortWriteOneP = DSI_LP_GSW1P_DISABLE;
LPCmd.LPGenShortWriteTwoP = DSI_LP_GSW2P_DISABLE;
LPCmd.LPGenShortReadNoP = DSI_LP_GSR0P_DISABLE;
LPCmd.LPGenShortReadOneP = DSI_LP_GSR1P_DISABLE;
LPCmd.LPGenShortReadTwoP = DSI_LP_GSR2P_DISABLE;
LPCmd.LPGenLongWrite = DSI_LP_GLW_DISABLE;
LPCmd.LPDcsShortWriteNoP = DSI_LP_DSW0P_DISABLE;
LPCmd.LPDcsShortWriteOneP = DSI_LP_DSW1P_DISABLE;
LPCmd.LPDcsShortReadNoP = DSI_LP_DSR0P_DISABLE;
LPCmd.LPDcsLongWrite = DSI_LP_DLW_DISABLE;
LPCmd.LPMaxReadPacket = DSI_LP_MRDP_DISABLE;
LPCmd.AcknowledgeRequest = DSI_ACKNOWLEDGE_DISABLE;
if (HAL_DSI_ConfigCommand(&hdsi, &LPCmd) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN DSIHOST_Init 2 */
/* USER CODE END DSIHOST_Init 2 */
}
/**
* @brief GFXMMU Initialization Function
* @param None
* @retval None
*/
static void MX_GFXMMU_Init(void)
{
/* USER CODE BEGIN GFXMMU_Init 0 */
/* USER CODE END GFXMMU_Init 0 */
/* USER CODE BEGIN GFXMMU_Init 1 */
/* USER CODE END GFXMMU_Init 1 */
hgfxmmu.Instance = GFXMMU;
hgfxmmu.Init.BlocksPerLine = GFXMMU_192BLOCKS;
hgfxmmu.Init.DefaultValue = 0;
hgfxmmu.Init.Buffers.Buf0Address = 0;
hgfxmmu.Init.Buffers.Buf1Address = 0;
hgfxmmu.Init.Buffers.Buf2Address = 0;
hgfxmmu.Init.Buffers.Buf3Address = 0;
hgfxmmu.Init.Interrupts.Activation = ENABLE;
if (HAL_GFXMMU_Init(&hgfxmmu) != HAL_OK)
{
Error_Handler();
}
if (HAL_GFXMMU_ConfigLut(&hgfxmmu, GFXMMU_LUT_FIRST, GFXMMU_LUT_SIZE, (uint32_t)gfxmmu_lut_config) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN GFXMMU_Init 2 */
/* USER CODE END GFXMMU_Init 2 */
}
/**
* @brief LTDC Initialization Function
* @param None
* @retval None
*/
static void MX_LTDC_Init(void)
{
/* USER CODE BEGIN LTDC_Init 0 */
/* USER CODE END LTDC_Init 0 */
LTDC_LayerCfgTypeDef pLayerCfg = {0};
LTDC_LayerCfgTypeDef pLayerCfg1 = {0};
/* USER CODE BEGIN LTDC_Init 1 */
/* USER CODE END LTDC_Init 1 */
hltdc.Instance = LTDC;
hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL;
hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL;
hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL;
hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
hltdc.Init.HorizontalSync = 7;
hltdc.Init.VerticalSync = 3;
hltdc.Init.AccumulatedHBP = 14;
hltdc.Init.AccumulatedVBP = 5;
hltdc.Init.AccumulatedActiveW = 654;
hltdc.Init.AccumulatedActiveH = 485;
hltdc.Init.TotalWidth = 660;
hltdc.Init.TotalHeigh = 487;
hltdc.Init.Backcolor.Blue = 0;
hltdc.Init.Backcolor.Green = 0;
hltdc.Init.Backcolor.Red = 0;
if (HAL_LTDC_Init(&hltdc) != HAL_OK)
{
Error_Handler();
}
pLayerCfg.WindowX0 = 0;
pLayerCfg.WindowX1 = 0;
pLayerCfg.WindowY0 = 0;
pLayerCfg.WindowY1 = 0;
pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888;
pLayerCfg.Alpha = 0;
pLayerCfg.Alpha0 = 0;
pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA;
pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA;
pLayerCfg.FBStartAdress = GFXMMU_VIRTUAL_BUFFER0_BASE;
pLayerCfg.ImageWidth = 0;
pLayerCfg.ImageHeight = 0;
pLayerCfg.Backcolor.Blue = 0;
pLayerCfg.Backcolor.Green = 0;
pLayerCfg.Backcolor.Red = 0;
if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg, 0) != HAL_OK)
{
Error_Handler();
}
pLayerCfg1.WindowX0 = 0;
pLayerCfg1.WindowX1 = 0;
pLayerCfg1.WindowY0 = 0;
pLayerCfg1.WindowY1 = 0;
pLayerCfg1.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888;
pLayerCfg1.Alpha = 0;
pLayerCfg1.Alpha0 = 0;
pLayerCfg1.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA;
pLayerCfg1.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA;
pLayerCfg1.FBStartAdress = GFXMMU_VIRTUAL_BUFFER0_BASE;
pLayerCfg1.ImageWidth = 0;
pLayerCfg1.ImageHeight = 0;
pLayerCfg1.Backcolor.Blue = 0;
pLayerCfg1.Backcolor.Green = 0;
pLayerCfg1.Backcolor.Red = 0;
if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg1, 1) != HAL_OK)
{
Error_Handler();
}
if (HAL_LTDC_SetPitch(&hltdc, 768, 0) != HAL_OK)
{
Error_Handler();
}
if (HAL_LTDC_SetPitch(&hltdc, 768, 1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN LTDC_Init 2 */
/* USER CODE END LTDC_Init 2 */
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART3;
PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/**
@ -185,43 +474,87 @@ void SystemClock_Config(void)
static void MX_USART3_UART_Init(void)
{
/* USER CODE BEGIN USART3_Init 0 */
/* USER CODE BEGIN USART3_Init 0 */
/* USER CODE END USART3_Init 0 */
/* USER CODE END USART3_Init 0 */
/* USER CODE BEGIN USART3_Init 1 */
/* USER CODE BEGIN USART3_Init 1 */
/* USER CODE END USART3_Init 1 */
huart3.Instance = USART3;
huart3.Init.BaudRate = 115200;
huart3.Init.WordLength = UART_WORDLENGTH_8B;
huart3.Init.StopBits = UART_STOPBITS_1;
huart3.Init.Parity = UART_PARITY_NONE;
huart3.Init.Mode = UART_MODE_TX_RX;
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
if (HAL_UART_Init(&huart3) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART3_Init 2 */
/* USER CODE END USART3_Init 1 */
huart3.Instance = USART3;
huart3.Init.BaudRate = 115200;
huart3.Init.WordLength = UART_WORDLENGTH_8B;
huart3.Init.StopBits = UART_STOPBITS_1;
huart3.Init.Parity = UART_PARITY_NONE;
huart3.Init.Mode = UART_MODE_TX_RX;
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
if (HAL_UART_Init(&huart3) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART3_Init 2 */
/* USER CODE END USART3_Init 2 */
/* USER CODE END USART3_Init 2 */
}
/* FMC initialization function */
static void MX_FMC_Init(void)
{
FMC_NORSRAM_TimingTypeDef Timing;
/** Perform the SRAM1 memory initialization sequence
*/
hsram1.Instance = FMC_NORSRAM_DEVICE;
hsram1.Extended = FMC_NORSRAM_EXTENDED_DEVICE;
/* hsram1.Init */
hsram1.Init.NSBank = FMC_NORSRAM_BANK1;
hsram1.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE;
hsram1.Init.MemoryType = FMC_MEMORY_TYPE_SRAM;
hsram1.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16;
hsram1.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE;
hsram1.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW;
hsram1.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS;
hsram1.Init.WriteOperation = FMC_WRITE_OPERATION_DISABLE;
hsram1.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE;
hsram1.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE;
hsram1.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_DISABLE;
hsram1.Init.WriteBurst = FMC_WRITE_BURST_DISABLE;
hsram1.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY;
hsram1.Init.WriteFifo = FMC_WRITE_FIFO_ENABLE;
hsram1.Init.NBLSetupTime = 0;
hsram1.Init.PageSize = FMC_PAGE_SIZE_NONE;
/* Timing */
Timing.AddressSetupTime = 15;
Timing.AddressHoldTime = 15;
Timing.DataSetupTime = 255;
Timing.DataHoldTime = 0;
Timing.BusTurnAroundDuration = 15;
Timing.CLKDivision = 16;
Timing.DataLatency = 17;
Timing.AccessMode = FMC_ACCESS_MODE_A;
/* ExtTiming */
if (HAL_SRAM_Init(&hsram1, &Timing, NULL) != HAL_OK)
{
Error_Handler( );
}
}
@ -233,9 +566,15 @@ static void MX_USART3_UART_Init(void)
static void MX_GPIO_Init(void)
{
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
HAL_PWREx_EnableVddIO2();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
}
@ -249,10 +588,10 @@ static void MX_GPIO_Init(void)
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
/* USER CODE END Error_Handler_Debug */
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
@ -264,11 +603,11 @@ void Error_Handler(void)
* @retval None
*/
void assert_failed(char *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

View File

@ -11,7 +11,7 @@
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* COPYRIGHT(c) 2019 STMicroelectronics
* COPYRIGHT(c) 2018 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@ -97,6 +97,194 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
/**
* @brief DMA2D MSP Initialization
* This function configures the hardware resources used in this example
* @param hdma2d: DMA2D handle pointer
* @retval None
*/
void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
{
if(hdma2d->Instance==DMA2D)
{
/* USER CODE BEGIN DMA2D_MspInit 0 */
/* USER CODE END DMA2D_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_DMA2D_CLK_ENABLE();
/* USER CODE BEGIN DMA2D_MspInit 1 */
/* USER CODE END DMA2D_MspInit 1 */
}
}
/**
* @brief DMA2D MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdma2d: DMA2D handle pointer
* @retval None
*/
void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
{
if(hdma2d->Instance==DMA2D)
{
/* USER CODE BEGIN DMA2D_MspDeInit 0 */
/* USER CODE END DMA2D_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_DMA2D_CLK_DISABLE();
/* USER CODE BEGIN DMA2D_MspDeInit 1 */
/* USER CODE END DMA2D_MspDeInit 1 */
}
}
/**
* @brief DSI MSP Initialization
* This function configures the hardware resources used in this example
* @param hdsi: DSI handle pointer
* @retval None
*/
void HAL_DSI_MspInit(DSI_HandleTypeDef* hdsi)
{
if(hdsi->Instance==DSI)
{
/* USER CODE BEGIN DSI_MspInit 0 */
/* USER CODE END DSI_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_DSI_CLK_ENABLE();
/* USER CODE BEGIN DSI_MspInit 1 */
/* USER CODE END DSI_MspInit 1 */
}
}
/**
* @brief DSI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdsi: DSI handle pointer
* @retval None
*/
void HAL_DSI_MspDeInit(DSI_HandleTypeDef* hdsi)
{
if(hdsi->Instance==DSI)
{
/* USER CODE BEGIN DSI_MspDeInit 0 */
/* USER CODE END DSI_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_DSI_CLK_DISABLE();
/* USER CODE BEGIN DSI_MspDeInit 1 */
/* USER CODE END DSI_MspDeInit 1 */
}
}
/**
* @brief GFXMMU MSP Initialization
* This function configures the hardware resources used in this example
* @param hgfxmmu: GFXMMU handle pointer
* @retval None
*/
void HAL_GFXMMU_MspInit(GFXMMU_HandleTypeDef* hgfxmmu)
{
if(hgfxmmu->Instance==GFXMMU)
{
/* USER CODE BEGIN GFXMMU_MspInit 0 */
/* USER CODE END GFXMMU_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_GFXMMU_CLK_ENABLE();
/* USER CODE BEGIN GFXMMU_MspInit 1 */
/* USER CODE END GFXMMU_MspInit 1 */
}
}
/**
* @brief GFXMMU MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hgfxmmu: GFXMMU handle pointer
* @retval None
*/
void HAL_GFXMMU_MspDeInit(GFXMMU_HandleTypeDef* hgfxmmu)
{
if(hgfxmmu->Instance==GFXMMU)
{
/* USER CODE BEGIN GFXMMU_MspDeInit 0 */
/* USER CODE END GFXMMU_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_GFXMMU_CLK_DISABLE();
/* USER CODE BEGIN GFXMMU_MspDeInit 1 */
/* USER CODE END GFXMMU_MspDeInit 1 */
}
}
/**
* @brief LTDC MSP Initialization
* This function configures the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/
void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
{
if(hltdc->Instance==LTDC)
{
/* USER CODE BEGIN LTDC_MspInit 0 */
/* USER CODE END LTDC_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_LTDC_CLK_ENABLE();
/* USER CODE BEGIN LTDC_MspInit 1 */
/* USER CODE END LTDC_MspInit 1 */
}
}
/**
* @brief LTDC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/
void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
{
if(hltdc->Instance==LTDC)
{
/* USER CODE BEGIN LTDC_MspDeInit 0 */
/* USER CODE END LTDC_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_LTDC_CLK_DISABLE();
/* USER CODE BEGIN LTDC_MspDeInit 1 */
/* USER CODE END LTDC_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
@ -165,6 +353,207 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
}
static uint32_t FMC_Initialized = 0;
static void HAL_FMC_MspInit(void){
/* USER CODE BEGIN FMC_MspInit 0 */
/* USER CODE END FMC_MspInit 0 */
GPIO_InitTypeDef GPIO_InitStruct;
if (FMC_Initialized) {
return;
}
FMC_Initialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_ENABLE();
/** FMC GPIO Configuration
PE0 ------> FMC_NBL0
PE1 ------> FMC_NBL1
PD0 ------> FMC_D2
PD4 ------> FMC_NOE
PD1 ------> FMC_D3
PE4 ------> FMC_A20
PE3 ------> FMC_A19
PD5 ------> FMC_NWE
PE5 ------> FMC_A21
PF2 ------> FMC_A2
PF1 ------> FMC_A1
PF0 ------> FMC_A0
PD7 ------> FMC_NE1
PF3 ------> FMC_A3
PF4 ------> FMC_A4
PF5 ------> FMC_A5
PG4 ------> FMC_A14
PG3 ------> FMC_A13
PG5 ------> FMC_A15
PG1 ------> FMC_A11
PE10 ------> FMC_D7
PD13 ------> FMC_A18
PG2 ------> FMC_A12
PD15 ------> FMC_D1
PD14 ------> FMC_D0
PG0 ------> FMC_A10
PE9 ------> FMC_D6
PE15 ------> FMC_D12
PD12 ------> FMC_A17
PD11 ------> FMC_A16
PD10 ------> FMC_D15
PF15 ------> FMC_A9
PE8 ------> FMC_D5
PE14 ------> FMC_D11
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF14 ------> FMC_A8
PE7 ------> FMC_D4
PE13 ------> FMC_D10
PF13 ------> FMC_A7
PE12 ------> FMC_D9
PF12 ------> FMC_A6
PE11 ------> FMC_D8
*/
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
|GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
|GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
|GPIO_PIN_12|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
|GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
|GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
|GPIO_PIN_13|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
|GPIO_PIN_2|GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* USER CODE BEGIN FMC_MspInit 1 */
/* USER CODE END FMC_MspInit 1 */
}
void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){
/* USER CODE BEGIN SRAM_MspInit 0 */
/* USER CODE END SRAM_MspInit 0 */
HAL_FMC_MspInit();
/* USER CODE BEGIN SRAM_MspInit 1 */
/* USER CODE END SRAM_MspInit 1 */
}
static uint32_t FMC_DeInitialized = 0;
static void HAL_FMC_MspDeInit(void){
/* USER CODE BEGIN FMC_MspDeInit 0 */
/* USER CODE END FMC_MspDeInit 0 */
if (FMC_DeInitialized) {
return;
}
FMC_DeInitialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_DISABLE();
/** FMC GPIO Configuration
PE0 ------> FMC_NBL0
PE1 ------> FMC_NBL1
PD0 ------> FMC_D2
PD4 ------> FMC_NOE
PD1 ------> FMC_D3
PE4 ------> FMC_A20
PE3 ------> FMC_A19
PD5 ------> FMC_NWE
PE5 ------> FMC_A21
PF2 ------> FMC_A2
PF1 ------> FMC_A1
PF0 ------> FMC_A0
PD7 ------> FMC_NE1
PF3 ------> FMC_A3
PF4 ------> FMC_A4
PF5 ------> FMC_A5
PG4 ------> FMC_A14
PG3 ------> FMC_A13
PG5 ------> FMC_A15
PG1 ------> FMC_A11
PE10 ------> FMC_D7
PD13 ------> FMC_A18
PG2 ------> FMC_A12
PD15 ------> FMC_D1
PD14 ------> FMC_D0
PG0 ------> FMC_A10
PE9 ------> FMC_D6
PE15 ------> FMC_D12
PD12 ------> FMC_A17
PD11 ------> FMC_A16
PD10 ------> FMC_D15
PF15 ------> FMC_A9
PE8 ------> FMC_D5
PE14 ------> FMC_D11
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF14 ------> FMC_A8
PE7 ------> FMC_D4
PE13 ------> FMC_D10
PF13 ------> FMC_A7
PE12 ------> FMC_D9
PF12 ------> FMC_A6
PE11 ------> FMC_D8
*/
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
|GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
|GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
|GPIO_PIN_12|GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
|GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
|GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8);
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
|GPIO_PIN_13|GPIO_PIN_12);
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
|GPIO_PIN_2|GPIO_PIN_0);
/* USER CODE BEGIN FMC_MspDeInit 1 */
/* USER CODE END FMC_MspDeInit 1 */
}
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){
/* USER CODE BEGIN SRAM_MspDeInit 0 */
/* USER CODE END SRAM_MspDeInit 0 */
HAL_FMC_MspDeInit();
/* USER CODE BEGIN SRAM_MspDeInit 1 */
/* USER CODE END SRAM_MspDeInit 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

View File

@ -7,6 +7,39 @@ config SOC_STM32L4R9AI
menu "Onboard Peripheral Drivers"
config BSP_USING_STLINK_TO_USART
bool "Enable STLINK TO USART (uart3)"
select BSP_USING_UART
select BSP_USING_UART3
default y
config BSP_USING_DSI
bool "Enable LCD"
select BSP_USING_SRAM
select BSP_USING_GFXMMU
default n
menu "Enable Touch"
config BSP_USING_TOUCH
bool "Enable Touch drivers"
select BSP_USING_I2C1
default n
if BSP_USING_TOUCH
config BSP_TOUCH_INT_PIN
int "Touch interrupt pin"
default 34
config BSP_I2C1_NAME
string "I2C1 Name for Touch"
default i2c1
endif
config TOUCH_IC_FT3X67
bool "FT3X67"
depends on BSP_USING_TOUCH
default n
endmenu
endmenu
menu "On-chip Peripheral Drivers"
@ -21,10 +54,40 @@ menu "On-chip Peripheral Drivers"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART3
bool "Enable UART3"
default y
config BSP_USING_UART3
bool "Enable UART3"
default y
endif
config BSP_USING_SRAM
bool "Enable SRAM"
select BSP_USING_FMC
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 1 216
default 116
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 216
default 117
endif
config BSP_USING_GFXMMU
bool
default n
config BSP_USING_FMC
bool
default n
endmenu

View File

@ -12,8 +12,19 @@ board.c
CubeMX_Config/Src/stm32l4xx_hal_msp.c
''')
if GetDepend(['BSP_USING_DSI']):
src += Glob('ports/drv_lcd_dsi.c')
if GetDepend(['BSP_USING_SRAM']):
src += Glob('ports/drv_sram.c')
if GetDepend(['BSP_USING_TOUCH']):
src += Glob('ports/drv_touch.c')
src += Glob('ports/drv_touch_ft.c')
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports/include']
startup_path_prefix = SDK_LIB

View File

@ -6,54 +6,62 @@
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift first version
* 2019-04-09 jhb
*/
#include "board.h"
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 2;
RCC_OscInitStruct.PLL.PLLN = 30;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
/**Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 2;
RCC_OscInitStruct.PLL.PLLN = 30;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART3;
PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART3|RCC_PERIPHCLK_DSI|RCC_PERIPHCLK_LTDC;
PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1;
PeriphClkInit.DsiClockSelection = RCC_DSICLKSOURCE_DSIPHY;
PeriphClkInit.LtdcClockSelection = RCC_LTDCCLKSOURCE_PLLSAI2_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2Source = RCC_PLLSOURCE_HSE;
PeriphClkInit.PLLSAI2.PLLSAI2M = 2;
PeriphClkInit.PLLSAI2.PLLSAI2N = 8;
PeriphClkInit.PLLSAI2.PLLSAI2P = RCC_PLLP_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2R = RCC_PLLR_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2Q = RCC_PLLQ_DIV2;
PeriphClkInit.PLLSAI2.PLLSAI2ClockOut = RCC_PLLSAI2_LTDCCLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}

View File

@ -0,0 +1,725 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-01-10 zylx first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#ifdef BSP_USING_DSI
#include <lcd_port_dsi.h>
#include <string.h>
#include "drv_gpio.h"
#include "gfxmmu_lut_390x390_24bpp.h"
#define DRV_DEBUG
#define LOG_TAG "drv.lcd"
#include <drv_log.h>
static DSI_HandleTypeDef DsiHandle;
struct drv_lcd_dsi_device
{
struct rt_device parent;
struct rt_device_graphic_info lcd_info;
struct rt_semaphore lcd_lock;
rt_uint8_t *front_buf;
};
struct drv_lcd_dsi_device _lcd;
static DMA2D_HandleTypeDef Dma2dHandle;
static void CopyInVirtualBuffer(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize)
{
uint32_t destination = (uint32_t)pDst + (y * 390 + x) * 4;
uint32_t source = (uint32_t)pSrc;
Dma2dHandle.Instance = DMA2D;
/*##-1- Configure the DMA2D Mode, Color Mode and output offset #############*/
Dma2dHandle.Init.Mode = DMA2D_M2M_PFC;
Dma2dHandle.Init.ColorMode = DMA2D_OUTPUT_RGB888;
Dma2dHandle.Init.OutputOffset = 1024 - 390;
/* No Output Alpha Inversion */
Dma2dHandle.Init.AlphaInverted = DMA2D_REGULAR_ALPHA;
/* No Output Red & Blue swap */
Dma2dHandle.Init.RedBlueSwap = DMA2D_RB_REGULAR;
/* Regular output byte order */
Dma2dHandle.Init.BytesSwap = DMA2D_BYTES_REGULAR;
/* Pixel mode */
Dma2dHandle.Init.LineOffsetMode = DMA2D_LOM_PIXELS;
/*##-2- Foreground Configuration ###########################################*/
Dma2dHandle.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888;
Dma2dHandle.LayerCfg[1].InputOffset = 0;
Dma2dHandle.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
/* Not used */
Dma2dHandle.LayerCfg[1].InputAlpha = 0xFF;
/* No ForeGround Red/Blue swap */
Dma2dHandle.LayerCfg[1].RedBlueSwap = DMA2D_RB_REGULAR;
/* No ForeGround Alpha inversion */
Dma2dHandle.LayerCfg[1].AlphaInverted = DMA2D_REGULAR_ALPHA;
/* DMA2D Initialization */
if (HAL_DMA2D_Init(&Dma2dHandle) == HAL_OK)
{
if (HAL_DMA2D_ConfigLayer(&Dma2dHandle, 1) == HAL_OK)
{
if (HAL_DMA2D_Start(&Dma2dHandle, source, destination, xsize, ysize) == HAL_OK)
{
/* Polling For DMA transfer */
HAL_DMA2D_PollForTransfer(&Dma2dHandle, 100);
}
}
}
}
static rt_err_t drv_lcd_init(struct rt_device *device)
{
struct drv_lcd_dsi_device *lcd = (struct drv_lcd_dsi_device *)device;
/* nothing, right now */
lcd = lcd;
return RT_EOK;
}
static rt_err_t drv_lcd_control(struct rt_device *device, int cmd, void *args)
{
struct drv_lcd_dsi_device *lcd = (struct drv_lcd_dsi_device *)device;
rt_uint8_t color = 0;
switch (cmd)
{
case RTGRAPHIC_CTRL_RECT_UPDATE:
{
/* update */
rt_sem_take(&_lcd.lcd_lock, RT_TICK_PER_SECOND / 20);
CopyInVirtualBuffer((uint32_t *)_lcd.lcd_info.framebuffer, (uint32_t *)LAYER_ADDRESS, 0, 0, 390, 390);
HAL_DSI_Refresh(&DsiHandle);
}
break;
case RTGRAPHIC_CTRL_GET_INFO:
{
struct rt_device_graphic_info *info = (struct rt_device_graphic_info *)args;
RT_ASSERT(info != RT_NULL);
info->pixel_format = lcd->lcd_info.pixel_format;
info->bits_per_pixel = 32;
info->width = lcd->lcd_info.width;
info->height = lcd->lcd_info.height;
info->framebuffer = lcd->lcd_info.framebuffer;
}
break;
}
return RT_EOK;
}
LTDC_HandleTypeDef LtdcHandle;
rt_err_t stm32_lcd_init(struct drv_lcd_dsi_device *lcd)
{
DSI_PLLInitTypeDef dsiPllInit = {0};
DSI_PHY_TimerTypeDef PhyTimings = {0};
DSI_HOST_TimeoutTypeDef HostTimeouts = {0};
DSI_LPCmdTypeDef LPCmd = {0};
DSI_CmdCfgTypeDef CmdCfg = {0};
GFXMMU_HandleTypeDef GfxmmuHandle = {0};
LTDC_LayerCfgTypeDef LayerCfg = {0};
/* GFXMMU CONFIGURATION */
__HAL_GFXMMU_RESET_HANDLE_STATE(&GfxmmuHandle);
GfxmmuHandle.Instance = GFXMMU;
GfxmmuHandle.Init.BlocksPerLine = GFXMMU_192BLOCKS;
GfxmmuHandle.Init.DefaultValue = 0xFFFFFFFF;
GfxmmuHandle.Init.Buffers.Buf0Address = (uint32_t)lcd->front_buf;
GfxmmuHandle.Init.Buffers.Buf1Address = 0;
GfxmmuHandle.Init.Buffers.Buf2Address = 0;
GfxmmuHandle.Init.Buffers.Buf3Address = 0;
GfxmmuHandle.Init.Interrupts.Activation = DISABLE;
GfxmmuHandle.Init.Interrupts.UsedInterrupts = GFXMMU_AHB_MASTER_ERROR_IT;
if (HAL_OK != HAL_GFXMMU_Init(&GfxmmuHandle))
{
return -RT_ERROR;
}
/* Initialize LUT */
if (HAL_OK != HAL_GFXMMU_ConfigLut(&GfxmmuHandle, 0, 390, (uint32_t) gfxmmu_lut_config_rgb888))
{
return -RT_ERROR;
}
/* Disable non visible lines : from line 390 to 1023 (634 lines) */
if (HAL_OK != HAL_GFXMMU_DisableLutLines(&GfxmmuHandle, 390, 634))
{
return -RT_ERROR;
}
/**********************/
/* LTDC CONFIGURATION */
/**********************/
/* LTDC initialization */
__HAL_LTDC_RESET_HANDLE_STATE(&LtdcHandle);
LtdcHandle.Instance = LTDC;
LtdcHandle.Init.HSPolarity = LTDC_HSPOLARITY_AL;
LtdcHandle.Init.VSPolarity = LTDC_VSPOLARITY_AL;
LtdcHandle.Init.DEPolarity = LTDC_DEPOLARITY_AL;
LtdcHandle.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
/* HSYNC width - 1 */
LtdcHandle.Init.HorizontalSync = 0;
/* VSYNC width - 1 */
LtdcHandle.Init.VerticalSync = 0;
/* HSYNC width + HBP - 1 */
LtdcHandle.Init.AccumulatedHBP = 1;
/* VSYNC width + VBP - 1 */
LtdcHandle.Init.AccumulatedVBP = 1;
/* HSYNC width + HBP + Active width - 1 */
LtdcHandle.Init.AccumulatedActiveW = 391;
/* VSYNC width + VBP + Active height - 1 */
LtdcHandle.Init.AccumulatedActiveH = 391;
/* HSYNC width + HBP + Active width + HFP - 1 */
LtdcHandle.Init.TotalWidth = 392;
/* VSYNC width + VBP + Active height + VFP - 1 */
LtdcHandle.Init.TotalHeigh = 392;
LtdcHandle.Init.Backcolor.Red = 0;
LtdcHandle.Init.Backcolor.Green = 0;
LtdcHandle.Init.Backcolor.Blue = 0;
LtdcHandle.Init.Backcolor.Reserved = 0xFF;
if (HAL_LTDC_Init(&LtdcHandle) != HAL_OK)
{
return -RT_ERROR;
}
/* LTDC layer 1 configuration */
LayerCfg.WindowX0 = 0;
LayerCfg.WindowX1 = 390;
LayerCfg.WindowY0 = 0;
LayerCfg.WindowY1 = 390;
LayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB888;
LayerCfg.Alpha = 0xFF;
LayerCfg.Alpha0 = 0;
LayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
LayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
LayerCfg.FBStartAdress = LAYER_ADDRESS;
/* virtual frame buffer contains 768 pixels per line for 24bpp */
/* (192 blocs * 16) / (24bpp/3) = 1024 pixels per ligne */
LayerCfg.ImageWidth = 1024;
LayerCfg.ImageHeight = 390;
LayerCfg.Backcolor.Red = 0;
LayerCfg.Backcolor.Green = 0;
LayerCfg.Backcolor.Blue = 0;
LayerCfg.Backcolor.Reserved = 0xFF;
if (HAL_LTDC_ConfigLayer(&LtdcHandle, &LayerCfg, LTDC_LAYER_1) != HAL_OK)
{
return -RT_ERROR;
}
/*********************/
/* DSI CONFIGURATION */
/*********************/
/* DSI initialization */
__HAL_DSI_RESET_HANDLE_STATE(&DsiHandle);
DsiHandle.Instance = DSI;
DsiHandle.Init.AutomaticClockLaneControl = DSI_AUTO_CLK_LANE_CTRL_DISABLE;
/* We have 1 data lane at 500Mbps => lane byte clock at 500/8 = 62,5 MHZ */
/* We want TX escape clock at arround 20MHz and under 20MHz so clock division is set to 4 */
DsiHandle.Init.TXEscapeCkdiv = 4;
DsiHandle.Init.NumberOfLanes = DSI_ONE_DATA_LANE;
/* We have HSE value at 16 Mhz and we want data lane at 500Mbps */
dsiPllInit.PLLNDIV = 20;
dsiPllInit.PLLIDF = DSI_PLL_IN_DIV1;
dsiPllInit.PLLODF = DSI_PLL_OUT_DIV2;
if (HAL_DSI_Init(&DsiHandle, &dsiPllInit) != HAL_OK)
{
return -RT_ERROR;
}
/* Tclk-post + Tclk-trail + Ths-exit = [(60ns + 52xUI) + (60ns) + (300ns)]/16ns */
PhyTimings.ClockLaneHS2LPTime = 33;
/* Tlpx + (Tclk-prepare + Tclk-zero) + Tclk-pre = [150ns + 300ns + 8xUI]/16ns */
PhyTimings.ClockLaneLP2HSTime = 30;
/* Ths-trail + Ths-exit = [(60ns + 4xUI) + 100ns]/16ns */
PhyTimings.DataLaneHS2LPTime = 11;
/* Tlpx + (Ths-prepare + Ths-zero) + Ths-sync = [150ns + (145ns + 10xUI) + 8xUI]/16ns */
PhyTimings.DataLaneLP2HSTime = 21;
PhyTimings.DataLaneMaxReadTime = 0;
PhyTimings.StopWaitTime = 7;
if (HAL_DSI_ConfigPhyTimer(&DsiHandle, &PhyTimings) != HAL_OK)
{
return -RT_ERROR;
}
HostTimeouts.TimeoutCkdiv = 1;
HostTimeouts.HighSpeedTransmissionTimeout = 0;
HostTimeouts.LowPowerReceptionTimeout = 0;
HostTimeouts.HighSpeedReadTimeout = 0;
HostTimeouts.LowPowerReadTimeout = 0;
HostTimeouts.HighSpeedWriteTimeout = 0;
HostTimeouts.HighSpeedWritePrespMode = 0;
HostTimeouts.LowPowerWriteTimeout = 0;
HostTimeouts.BTATimeout = 0;
if (HAL_DSI_ConfigHostTimeouts(&DsiHandle, &HostTimeouts) != HAL_OK)
{
return -RT_ERROR;
}
LPCmd.LPGenShortWriteNoP = DSI_LP_GSW0P_ENABLE;
LPCmd.LPGenShortWriteOneP = DSI_LP_GSW1P_ENABLE;
LPCmd.LPGenShortWriteTwoP = DSI_LP_GSW2P_ENABLE;
LPCmd.LPGenShortReadNoP = DSI_LP_GSR0P_ENABLE;
LPCmd.LPGenShortReadOneP = DSI_LP_GSR1P_ENABLE;
LPCmd.LPGenShortReadTwoP = DSI_LP_GSR2P_ENABLE;
LPCmd.LPGenLongWrite = DSI_LP_GLW_DISABLE;
LPCmd.LPDcsShortWriteNoP = DSI_LP_DSW0P_ENABLE;
LPCmd.LPDcsShortWriteOneP = DSI_LP_DSW1P_ENABLE;
LPCmd.LPDcsShortReadNoP = DSI_LP_DSR0P_ENABLE;
LPCmd.LPDcsLongWrite = DSI_LP_DLW_DISABLE;
LPCmd.LPMaxReadPacket = DSI_LP_MRDP_DISABLE;
LPCmd.AcknowledgeRequest = DSI_ACKNOWLEDGE_DISABLE;
if (HAL_DSI_ConfigCommand(&DsiHandle, &LPCmd) != HAL_OK)
{
return -RT_ERROR;
}
CmdCfg.VirtualChannelID = 0;
#if LCD_BITS_PER_PIXEL == 16
CmdCfg.ColorCoding = DSI_RGB565;
#else
CmdCfg.ColorCoding = DSI_RGB888;
#endif
CmdCfg.CommandSize = 390;
CmdCfg.TearingEffectSource = DSI_TE_DSILINK;
CmdCfg.TearingEffectPolarity = DSI_TE_FALLING_EDGE;
CmdCfg.HSPolarity = DSI_HSYNC_ACTIVE_LOW;
CmdCfg.VSPolarity = DSI_VSYNC_ACTIVE_LOW;
CmdCfg.DEPolarity = DSI_DATA_ENABLE_ACTIVE_HIGH;
CmdCfg.VSyncPol = DSI_VSYNC_FALLING;
CmdCfg.AutomaticRefresh = DSI_AR_ENABLE;
CmdCfg.TEAcknowledgeRequest = DSI_TE_ACKNOWLEDGE_ENABLE;
if (HAL_DSI_ConfigAdaptedCommandMode(&DsiHandle, &CmdCfg) != HAL_OK)
{
return -RT_ERROR;
}
/* Disable the Tearing Effect interrupt activated by default on previous function */
__HAL_DSI_DISABLE_IT(&DsiHandle, DSI_IT_TE);
if (HAL_DSI_ConfigFlowControl(&DsiHandle, DSI_FLOW_CONTROL_BTA) != HAL_OK)
{
return -RT_ERROR;
}
/* Enable DSI */
__HAL_DSI_ENABLE(&DsiHandle);
/*************************/
/* LCD POWER ON SEQUENCE */
/*************************/
/* Step 1 */
/* Go to command 2 */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x01);
/* IC Frame rate control, set power, sw mapping, mux swithc timing command */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x06, 0x62);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0E, 0x80);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0F, 0x80);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x10, 0x71);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x13, 0x81);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x14, 0x81);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x15, 0x82);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x16, 0x82);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x18, 0x88);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x19, 0x55);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1A, 0x10);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1C, 0x99);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1D, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1E, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1F, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x20, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x25, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x26, 0x8D);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2A, 0x03);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2B, 0x8D);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x36, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x37, 0x10);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x3A, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x3B, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x3D, 0x20);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x3F, 0x3A);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x40, 0x30);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x41, 0x1A);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x42, 0x33);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x43, 0x22);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x44, 0x11);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x45, 0x66);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x46, 0x55);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x47, 0x44);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x4C, 0x33);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x4D, 0x22);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x4E, 0x11);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x4F, 0x66);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x50, 0x55);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x51, 0x44);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x57, 0x33);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x6B, 0x1B);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x70, 0x55);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x74, 0x0C);
/* Go to command 3 */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x02);
/* Set the VGMP/VGSP coltage control */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9B, 0x40);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9C, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9D, 0x20);
/* Go to command 4 */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x03);
/* Set the VGMP/VGSP coltage control */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9B, 0x40);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9C, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x9D, 0x20);
/* Go to command 5 */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x04);
/* VSR command */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x5D, 0x10);
/* VSR1 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x00, 0x8D);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x01, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x02, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x03, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x04, 0x10);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x05, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x06, 0xA7);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x07, 0x20);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x08, 0x00);
/* VSR2 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x09, 0xC2);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0A, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0B, 0x02);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0C, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0D, 0x40);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0E, 0x06);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x0F, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x10, 0xA7);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x11, 0x00);
/* VSR3 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x12, 0xC2);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x13, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x14, 0x02);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x15, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x16, 0x40);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x17, 0x07);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x18, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x19, 0xA7);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1A, 0x00);
/* VSR4 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1B, 0x82);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1C, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1D, 0xFF);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1E, 0x05);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x1F, 0x60);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x20, 0x02);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x21, 0x01);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x22, 0x7C);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x23, 0x00);
/* VSR5 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x24, 0xC2);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x25, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x26, 0x04);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x27, 0x02);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x28, 0x70);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x29, 0x05);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2A, 0x74);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2B, 0x8D);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2D, 0x00);
/* VSR6 timing set */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2F, 0xC2);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x30, 0x00);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x31, 0x04);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x32, 0x02);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x33, 0x70);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x34, 0x07);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x35, 0x74);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x36, 0x8D);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x37, 0x00);
/* VSR marping command */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x5E, 0x20);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x5F, 0x31);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x60, 0x54);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x61, 0x76);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x62, 0x98);
/* Go to command 6 */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x05);
/* Set the ELVSS voltage */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x05, 0x17);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x2A, 0x04);
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x91, 0x00);
/* Go back in standard commands */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xFE, 0x00);
/* Set the Pixel format */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x3A, 0x07);
/* Set tear off */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, DSI_SET_TEAR_OFF, 0x0);
/* Set DSI mode to internal timing added vs ORIGINAL for Command mode */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0xC2, 0x0);
/* Set memory address MODIFIED vs ORIGINAL */
{
uint8_t InitParam1[4] = {0x00, 0x04, 0x01, 0x89};
uint8_t InitParam2[4] = {0x00, 0x00, 0x01, 0x85};
HAL_DSI_LongWrite(&DsiHandle, 0, DSI_DCS_LONG_PKT_WRITE, 4, DSI_SET_COLUMN_ADDRESS, InitParam1);
HAL_DSI_LongWrite(&DsiHandle, 0, DSI_DCS_LONG_PKT_WRITE, 4, DSI_SET_PAGE_ADDRESS, InitParam2);
}
/* Sleep out */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P0, DSI_EXIT_SLEEP_MODE, 0x0);
HAL_Delay(120);
/* Set default Brightness */
HAL_DSI_ShortWrite(&DsiHandle, 0, DSI_DCS_SHORT_PKT_WRITE_P1, 0x51, BRIGHTNESS_NORMAL);
/* Set display on */
if (HAL_DSI_ShortWrite(&DsiHandle,
0,
DSI_DCS_SHORT_PKT_WRITE_P0,
DSI_SET_DISPLAY_ON,
0x0) != HAL_OK)
{
LOG_E("set display on failed");
return -RT_ERROR;
}
/* Enable DSI Wrapper */
__HAL_DSI_WRAPPER_ENABLE(&DsiHandle);
/* NVIC configuration for DSI interrupt that is now enabled */
HAL_NVIC_SetPriority(DSI_IRQn, 3, 0);
HAL_NVIC_EnableIRQ(DSI_IRQn);
HAL_DSI_Refresh(&DsiHandle);
LOG_D("LCD init success");
return RT_EOK;
}
#if defined(LCD_BACKLIGHT_USING_PWM)
void turn_on_lcd_backlight(void)
{
struct rt_device_pwm *pwm_dev;
/* turn on the LCD backlight */
pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
/* pwm frequency:100K = 10000ns */
rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, 10000, 10000);
rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);
}
#elif defined(LCD_BACKLIGHT_USING_GPIO)
void turn_on_lcd_backlight(void)
{
rt_pin_mode(LCD_BL_GPIO_NUM, PIN_MODE_OUTPUT);
rt_pin_write(LCD_BL_GPIO_NUM, PIN_HIGH);
}
#endif
void DSI_IRQHandler(void)
{
HAL_DSI_IRQHandler(&DsiHandle);
}
void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi)
{
rt_sem_release(&_lcd.lcd_lock);
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops lcd_ops =
{
drv_lcd_init,
RT_NULL,
RT_NULL,
RT_NULL,
RT_NULL,
drv_lcd_control
};
#endif
int drv_lcd_hw_init(void)
{
rt_err_t result = RT_EOK;
struct rt_device *device = &_lcd.parent;
/* memset _lcd to zero */
memset(&_lcd, 0x00, sizeof(_lcd));
/* init lcd_lock semaphore */
result = rt_sem_init(&_lcd.lcd_lock, "lcd_lock", 0, RT_IPC_FLAG_FIFO);
if (result != RT_EOK)
{
LOG_E("init semaphore failed!\n");
result = -RT_ENOMEM;
goto __exit;
}
/* config LCD dev info */
_lcd.lcd_info.height = LCD_HEIGHT;
_lcd.lcd_info.width = LCD_WIDTH;
_lcd.lcd_info.bits_per_pixel = LCD_BITS_PER_PIXEL;
_lcd.lcd_info.pixel_format = LCD_PIXEL_FORMAT;
/* malloc memory */
_lcd.lcd_info.framebuffer = rt_malloc_align(LCD_DSI_BUF_SIZE, 16);
_lcd.front_buf = rt_malloc_align(LCD_DSI_BUF_SIZE_ROUND, 16);
if (_lcd.lcd_info.framebuffer == RT_NULL || _lcd.front_buf == RT_NULL)
{
LOG_E("init frame buffer failed!\n");
result = -RT_ENOMEM;
goto __exit;
}
/* memset buff to 0xFF */
memset(_lcd.lcd_info.framebuffer, 0xFF, LCD_DSI_BUF_SIZE);
memset(_lcd.front_buf, 0xFF, LCD_DSI_BUF_SIZE_ROUND);
device->type = RT_Device_Class_Graphic;
#ifdef RT_USING_DEVICE_OPS
device->ops = &lcd_ops;
#else
device->init = drv_lcd_init;
device->control = drv_lcd_control;
#endif
/* register lcd device */
rt_device_register(device, "lcd_dsi", RT_DEVICE_FLAG_RDWR);
/* init stm32 LTDC */
if (stm32_lcd_init(&_lcd) != RT_EOK)
{
result = -RT_ERROR;
goto __exit;
}
else
{
turn_on_lcd_backlight();
}
__exit:
if (result != RT_EOK)
{
rt_sem_delete(&_lcd.lcd_lock);
if (_lcd.lcd_info.framebuffer)
{
rt_free(_lcd.lcd_info.framebuffer);
}
if (_lcd.front_buf)
{
rt_free(_lcd.front_buf);
}
}
return result;
}
INIT_DEVICE_EXPORT(drv_lcd_hw_init);
#if defined(PKG_USING_GUIENGINE)
#include <rtgui/driver.h>
int graphic_device_init(void)
{
struct rt_device *device;
device = rt_device_find("lcd_dsi");
if (device)
{
rtgui_graphic_set_device(device);
}
return 0;
}
INIT_ENV_EXPORT(graphic_device_init);
#endif
#ifdef DRV_DEBUG
#ifdef FINSH_USING_MSH
int lcd_dsi_test()
{
struct drv_lcd_dsi_device *lcd;
lcd = (struct drv_lcd_dsi_device *)rt_device_find("lcd_dsi");
rt_uint8_t *ptr = lcd->lcd_info.framebuffer;
while (1)
{
/* red */
for (unsigned long long i = 0; i < LCD_DSI_BUF_SIZE/4; i++)
{
ptr[4 * i] = 0x00;
ptr[4 * i + 1] = 0x00;
ptr[4 * i + 2] = 0xFF;
ptr[4 * i + 3] = 0xFF;
}
rt_device_control(&lcd->parent, RTGRAPHIC_CTRL_RECT_UPDATE, RT_NULL);
rt_thread_mdelay(1000);
/* green */
for (int i = 0; i < LCD_DSI_BUF_SIZE/4; i++)
{
ptr[4 * i] = 0x00;
ptr[4 * i + 1] = 0xFF;
ptr[4 * i + 2] = 0x00;
ptr[4 * i + 3] = 0xFF;
}
rt_device_control(&lcd->parent, RTGRAPHIC_CTRL_RECT_UPDATE, RT_NULL);
rt_thread_mdelay(1000);
/* blue */
for (int i = 0; i < LCD_DSI_BUF_SIZE/4; i++)
{
ptr[4 * i] = 0xFF;
ptr[4 * i + 1] = 0x00;
ptr[4 * i + 2] = 0x00;
ptr[4 * i + 3] = 0xFF;
}
rt_device_control(&lcd->parent, RTGRAPHIC_CTRL_RECT_UPDATE, RT_NULL);
rt_thread_mdelay(1000);
}
}
MSH_CMD_EXPORT(lcd_dsi_test, lcd_dsi_test);
//draw a line in screen
void line()
{
struct drv_lcd_dsi_device *lcd;
lcd = (struct drv_lcd_dsi_device *)rt_device_find("lcd_dsi");
rt_uint8_t *ptr = lcd->lcd_info.framebuffer;
/* red */
for (unsigned long long i = LCD_DSI_BUF_SIZE/4/2; i <LCD_DSI_BUF_SIZE/4/2+390; i++)
{
ptr[4 * i] = 0x00;
ptr[4 * i + 1] = 0x00;
ptr[4 * i + 2] = 0xFF;
ptr[4 * i + 3] = 0xFF;
}
rt_device_control(&lcd->parent, RTGRAPHIC_CTRL_RECT_UPDATE, RT_NULL);
}
MSH_CMD_EXPORT(line, line);
#endif /* FINSH_USING_MSH */
#endif /* DRV_DEBUG */
#endif /* BSP_USING_LCD */

View File

@ -0,0 +1,163 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-04 zylx first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#ifdef BSP_USING_SRAM
#include <sram_port.h>
#define DRV_DEBUG
#define LOG_TAG "drv.sram"
#include <drv_log.h>
static SRAM_HandleTypeDef hsram;
static FMC_NORSRAM_TimingTypeDef SRAM_Timing;
#ifdef RT_USING_MEMHEAP_AS_HEAP
static struct rt_memheap system_heap;
#endif
static int SRAM_Init(void)
{
int result = RT_EOK;
/* SRAM device configuration */
hsram.Instance = FMC_NORSRAM_DEVICE;
hsram.Extended = FMC_NORSRAM_EXTENDED_DEVICE;
/* SRAM device configuration */
SRAM_Timing.AddressSetupTime = ADDRESSSETUPTIME;
SRAM_Timing.AddressHoldTime = ADDRESSHOLDTIME; /* Min value, Don't care on SRAM Access mode A */
SRAM_Timing.DataSetupTime = DATASETUPTIME;
SRAM_Timing.DataHoldTime = DATAHOLDTIME;
SRAM_Timing.BusTurnAroundDuration = BUSTURNAROUNDDURATION;
SRAM_Timing.CLKDivision = CLKDIVISION; /* Min value, Don't care on SRAM Access mode A */
SRAM_Timing.DataLatency = DATALATENCY; /* Min value, Don't care on SRAM Access mode A */
SRAM_Timing.AccessMode = ACCESSMODE;
hsram.Init.NSBank = FMC_NORSRAM_BANK1;
hsram.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE;
hsram.Init.MemoryType = FMC_MEMORY_TYPE_SRAM;
#if SRAM_DATA_WIDTH == 8
hsram.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_8;
#elif SRAM_DATA_WIDTH == 16
hsram.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16;
#else
hsram.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_32;
#endif
hsram.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE;
hsram.Init.WriteOperation = FMC_WRITE_OPERATION_ENABLE;
hsram.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE;
hsram.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS;
hsram.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW;
hsram.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE;
hsram.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_DISABLE;
hsram.Init.WriteBurst = FMC_WRITE_BURST_DISABLE;
hsram.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY;
hsram.Init.WriteFifo = FMC_WRITE_FIFO_DISABLE;
hsram.Init.NBLSetupTime = 0;
hsram.Init.PageSize = FMC_PAGE_SIZE_NONE;
/* Initialize the SRAM controller */
if (HAL_SRAM_Init(&hsram, &SRAM_Timing, &SRAM_Timing) != HAL_OK)
{
LOG_E("SRAM init failed!");
result = -RT_ERROR;
}
else
{
LOG_D("sram init success, mapped at 0x%X, size is %d bytes, data width is %d", SRAM_BANK_ADDR, SRAM_SIZE, SRAM_DATA_WIDTH);
#ifdef RT_USING_MEMHEAP_AS_HEAP
/* If RT_USING_MEMHEAP_AS_HEAP is enabled, SRAM is initialized to the heap */
rt_memheap_init(&system_heap, "sram", (void *)SRAM_BANK_ADDR, SRAM_SIZE);
#endif
}
return result;
}
INIT_BOARD_EXPORT(SRAM_Init);
#ifdef DRV_DEBUG
#ifdef FINSH_USING_MSH
int sram_test(void)
{
int i = 0;
uint32_t start_time = 0, time_cast = 0;
#if SRAM_DATA_WIDTH == 8
char data_width = 1;
uint8_t data = 0;
uint8_t *ptr = (uint8_t *)SRAM_BANK_ADDR;
#elif SRAM_DATA_WIDTH == 16
char data_width = 2;
uint16_t data = 0;
uint16_t *ptr = (uint16_t *)SRAM_BANK_ADDR;
#else
char data_width = 4;
uint32_t data = 0;
uint32_t *ptr = (uint32_t *)SRAM_BANK_ADDR;
#endif
/* write data */
LOG_D("Writing the %ld bytes data, waiting....", SRAM_SIZE);
start_time = rt_tick_get();
for (i = 0; i < SRAM_SIZE / data_width; i++)
{
#if SRAM_DATA_WIDTH == 8
((__IO uint8_t *)ptr)[i] = (uint8_t)0x55;
#elif SRAM_DATA_WIDTH == 16
((__IO uint16_t *)ptr)[i] = (uint16_t)0x5555;
#else
((__IO uint32_t *)ptr)[i] = (uint32_t)0x55555555;
#endif
}
time_cast = rt_tick_get() - start_time;
LOG_D("Write data success, total time: %d.%03dS.", time_cast / RT_TICK_PER_SECOND,
time_cast % RT_TICK_PER_SECOND / ((RT_TICK_PER_SECOND * 1 + 999) / 1000));
/* read data */
LOG_D("start Reading and verifying data, waiting....");
for (i = 0; i < SRAM_SIZE / data_width; i++)
{
#if SRAM_DATA_WIDTH == 8
data = ((__IO uint8_t *)ptr)[i];
if (data != 0x55)
{
LOG_E("SRAM test failed!");
break;
}
#elif SRAM_DATA_WIDTH == 16
data = ((__IO uint16_t *)ptr)[i];
if (data != 0x5555)
{
LOG_E("SRAM test failed!");
break;
}
#else
data = ((__IO uint32_t *)ptr)[i];
if (data != 0x55555555)
{
LOG_E("SRAM test failed!");
break;
}
#endif
}
if (i >= SRAM_SIZE / data_width)
{
LOG_D("SRAM test success!");
}
return RT_EOK;
}
MSH_CMD_EXPORT(sram_test, sram test);
#endif /* FINSH_USING_MSH */
#endif /* DRV_DEBUG */
#endif /* BSP_USING_SRAM */

View File

@ -0,0 +1,194 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-02-08 Zhangyihong the first version
*/
#include "drv_touch.h"
#include <string.h>
#ifdef BSP_USING_TOUCH
#ifdef PKG_USING_GUIENGINE
#include <rtgui/event.h>
#include <rtgui/rtgui_server.h>
#elif defined(PKG_USING_LITTLEVGL2RTT)
#include <littlevgl2rtt.h>
#endif
#define BSP_TOUCH_SAMPLE_HZ (50)
#define DBG_ENABLE
#define DBG_SECTION_NAME "TOUCH"
#define DBG_LEVEL DBG_ERROR
#define DBG_COLOR
#include <rtdbg.h>
static rt_list_t driver_list;
void rt_touch_drivers_register(touch_drv_t drv)
{
rt_list_insert_before(&driver_list, &drv->list);
}
static void post_down_event(rt_uint16_t x, rt_uint16_t y, rt_tick_t ts)
{
#ifdef PKG_USING_GUIENGINE
struct rtgui_event_mouse emouse;
emouse.parent.sender = RT_NULL;
emouse.wid = RT_NULL;
emouse.parent.type = RTGUI_EVENT_MOUSE_BUTTON;
emouse.button = RTGUI_MOUSE_BUTTON_LEFT | RTGUI_MOUSE_BUTTON_DOWN;
emouse.x = x;
emouse.y = y;
emouse.ts = rt_tick_get();
emouse.id = ts;
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#elif defined(PKG_USING_LITTLEVGL2RTT)
littlevgl2rtt_send_input_event(x, y, LITTLEVGL2RTT_INPUT_DOWN);
#endif
}
static void post_motion_event(rt_uint16_t x, rt_uint16_t y, rt_tick_t ts)
{
#ifdef PKG_USING_GUIENGINE
struct rtgui_event_mouse emouse;
emouse.parent.sender = RT_NULL;
emouse.wid = RT_NULL;
emouse.button = RTGUI_MOUSE_BUTTON_LEFT | RTGUI_MOUSE_BUTTON_DOWN;
emouse.parent.type = RTGUI_EVENT_MOUSE_MOTION;
emouse.x = x;
emouse.y = y;
emouse.ts = rt_tick_get();
emouse.id = ts;
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#elif defined(PKG_USING_LITTLEVGL2RTT)
littlevgl2rtt_send_input_event(x, y, LITTLEVGL2RTT_INPUT_MOVE);
#endif
}
static void post_up_event(rt_uint16_t x, rt_uint16_t y, rt_tick_t ts)
{
#ifdef PKG_USING_GUIENGINE
struct rtgui_event_mouse emouse;
emouse.parent.sender = RT_NULL;
emouse.wid = RT_NULL;
emouse.parent.type = RTGUI_EVENT_MOUSE_BUTTON;
emouse.button = RTGUI_MOUSE_BUTTON_LEFT | RTGUI_MOUSE_BUTTON_UP;
emouse.x = x;
emouse.y = y;
emouse.ts = rt_tick_get();
emouse.id = ts;
rtgui_server_post_event(&emouse.parent, sizeof(emouse));
#elif defined(PKG_USING_LITTLEVGL2RTT)
littlevgl2rtt_send_input_event(x, y, LITTLEVGL2RTT_INPUT_MOVE);
#endif
}
static void touch_thread_entry(void *parameter)
{
touch_drv_t touch = (touch_drv_t)parameter;
struct touch_message msg;
rt_tick_t emouse_id = 0;
touch->ops->isr_enable(RT_TRUE);
while (1)
{
if (rt_sem_take(touch->isr_sem, 10) != RT_EOK)
{
continue;
}
while(touch->ops->read_point(&msg) == RT_EOK)
{
switch (msg.event)
{
case TOUCH_EVENT_UP:
post_up_event(msg.x, msg.y, emouse_id);
break;
case TOUCH_EVENT_DOWN:
emouse_id = rt_tick_get();
post_down_event(msg.x, msg.y, emouse_id);
break;
case TOUCH_EVENT_MOVE:
post_motion_event(msg.x, msg.y, emouse_id);
break;
default:
break;
}
rt_thread_delay(RT_TICK_PER_SECOND / BSP_TOUCH_SAMPLE_HZ);
}
touch->ops->isr_enable(RT_TRUE);
}
}
static int rt_touch_driver_init(void)
{
rt_list_init(&driver_list);
return 0;
}
INIT_BOARD_EXPORT(rt_touch_driver_init);
static struct rt_i2c_bus_device *i2c_bus = RT_NULL;
static int rt_touch_thread_init(void)
{
rt_list_t *l;
touch_drv_t current_driver;
rt_thread_t tid = RT_NULL;
i2c_bus = (struct rt_i2c_bus_device *)rt_device_find(BSP_I2C1_NAME);
RT_ASSERT(i2c_bus);
current_driver = RT_NULL;
if (rt_device_open((rt_device_t)i2c_bus, RT_DEVICE_OFLAG_RDWR) != RT_EOK)
return -1;
for (l = driver_list.next; l != &driver_list; l = l->next)
{
if (rt_list_entry(l, struct touch_drivers, list)->probe(i2c_bus))
{
current_driver = rt_list_entry(l, struct touch_drivers, list);
break;
}
}
if (current_driver == RT_NULL)
{
LOG_E("no touch screen or do not have driver\r\n");
rt_device_close((rt_device_t)i2c_bus);
return -1;
}
current_driver->ops->init(i2c_bus);
LOG_I("touch screen found driver\r\n");
tid = rt_thread_create("touch", touch_thread_entry, current_driver, 2048, 27, 20);
if (tid == RT_NULL)
{
current_driver->ops->deinit();
rt_device_close((rt_device_t)i2c_bus);
return -1;
}
rt_thread_startup(tid);
return 0;
}
static void touch_init_thread_entry(void *parameter)
{
rt_touch_thread_init();
}
static int touc_bg_init(void)
{
rt_thread_t tid = RT_NULL;
tid = rt_thread_create("touchi", touch_init_thread_entry, RT_NULL, 2048, 28, 20);
if (tid == RT_NULL)
{
return -1;
}
rt_thread_startup(tid);
return 0;
}
INIT_APP_EXPORT(touc_bg_init);
#endif

View File

@ -0,0 +1,218 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-08-08 Yang the first version
*/
#include <rtthread.h>
#include <rthw.h>
#include <rtdevice.h>
#include "drv_touch.h"
#include <string.h>
#ifdef BSP_USING_TOUCH
#define DBG_ENABLE
#define DBG_SECTION_NAME "TOUCH.ft"
#define DBG_LEVEL TOUCH_DBG_LEVEL
#define DBG_COLOR
#include <rtdbg.h>
#ifdef TOUCH_IC_FT3X67
#define CHIP_ID_REG 0xA8U
#define CHIP_ID_VALUE 0x11U
#define TOUCH_SLAVE_ADDR 0x38U
#else
#error "Please define at least one TOUCH DEVICE"
/* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */
#endif
static struct rt_i2c_bus_device *ft_i2c_bus;
static struct touch_drivers ft_driver;
static int ft_read(struct rt_i2c_bus_device *i2c_bus, rt_uint8_t addr, rt_uint8_t *buffer, rt_size_t length)
{
int ret = -1;
int retries = 0;
struct rt_i2c_msg msgs[] =
{
{
.addr = ft_driver.address,
.flags = RT_I2C_WR,
.len = 1,
.buf = &addr,
},
{
.addr = ft_driver.address,
.flags = RT_I2C_RD,
.len = length,
.buf = buffer,
},
};
while (retries < IIC_RETRY_NUM)
{
ret = rt_i2c_transfer(i2c_bus, msgs, 2);
if (ret == 2)break;
retries++;
}
if (retries >= IIC_RETRY_NUM)
{
LOG_E("%s i2c read error: %d", __func__, ret);
return -1;
}
return ret;
}
static void ft_write(touch_drv_t driver, struct rt_i2c_bus_device *i2c_bus, rt_uint8_t addr, rt_uint8_t *buffer, rt_size_t length)
{
rt_uint8_t *send_buffer = rt_malloc(length + 1);
RT_ASSERT(send_buffer);
send_buffer[0] = addr;
memcpy(send_buffer + 1, buffer, length);
struct rt_i2c_msg msgs[] =
{
{
.addr = ft_driver.address,
.flags = RT_I2C_WR,
.len = length + 1,
.buf = send_buffer,
}
};
length = rt_i2c_transfer(i2c_bus, msgs, 1);
rt_free(send_buffer);
send_buffer = RT_NULL;
}
static void ft_isr_enable(rt_bool_t enable)
{
rt_pin_irq_enable(BSP_TOUCH_INT_PIN, enable);
}
static void ft_touch_isr(void *parameter)
{
ft_isr_enable(RT_FALSE);
rt_sem_release(ft_driver.isr_sem);
}
static rt_err_t ft_read_point(touch_msg_t msg)
{
int ret = -1;
uint8_t point_num = 0;
static uint8_t s_tp_down = 0;
uint8_t point[6];
ret = ft_read(ft_i2c_bus, 0x02, &point_num, 1);
if (ret < 0)
{
return RT_ERROR;
}
if (point_num == 0)
{
if (s_tp_down)
{
s_tp_down = 0;
msg->event = TOUCH_EVENT_UP;
return RT_EOK;
}
msg->event = TOUCH_EVENT_NONE;
return RT_ERROR;
}
ret = ft_read(ft_i2c_bus, 0x03, point, 6);
if (ret < 0)
{
return RT_ERROR;
}
msg->y = (point[0]&0x0F) << 8 | point[1];
msg->x = (point[2]&0x0F) << 8 | point[3];
if (s_tp_down)
{
msg->event = TOUCH_EVENT_MOVE;
return RT_EOK;
}
msg->event = TOUCH_EVENT_DOWN;
s_tp_down = 1;
return RT_EOK;
}
static void ft_init(struct rt_i2c_bus_device *i2c_bus)
{
if (ft_i2c_bus == RT_NULL)
{
ft_i2c_bus = i2c_bus;
}
ft_driver.isr_sem = rt_sem_create("ft", 0, RT_IPC_FLAG_FIFO);
RT_ASSERT(ft_driver.isr_sem);
rt_pin_mode(BSP_TOUCH_INT_PIN, PIN_MODE_INPUT_PULLUP);
rt_pin_attach_irq(BSP_TOUCH_INT_PIN, PIN_IRQ_MODE_FALLING, ft_touch_isr, RT_NULL);
rt_thread_mdelay(200);
}
static void ft_deinit(void)
{
if (ft_driver.isr_sem)
{
rt_sem_delete(ft_driver.isr_sem);
ft_driver.isr_sem = RT_NULL;
}
}
struct touch_ops ft_ops =
{
ft_isr_enable,
ft_read_point,
ft_init,
ft_deinit,
};
static rt_bool_t ft_probe(struct rt_i2c_bus_device *i2c_bus)
{
int err = 0;
uint8_t cid = 0xFF;
ft_i2c_bus = i2c_bus;
err = ft_read(ft_i2c_bus, CHIP_ID_REG, (uint8_t *)&cid, 1);
if (err < 0)
{
LOG_E("%s failed: %d", __func__, err);
return RT_FALSE;
}
LOG_I("touch CID:%02X", cid);
if(cid == CHIP_ID_VALUE)
{
return RT_TRUE;
}
return RT_FALSE;
}
int ft_driver_register(void)
{
ft_driver.address = TOUCH_SLAVE_ADDR;
ft_driver.probe = ft_probe;
ft_driver.ops = &ft_ops;
ft_driver.user_data = RT_NULL;
rt_touch_drivers_register(&ft_driver);
return 0;
}
INIT_DEVICE_EXPORT(ft_driver_register);
#endif

View File

@ -0,0 +1,54 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-02-08 Zhangyihong the first version
*/
#ifndef __DRV_TOUCH_H__
#define __DRV_TOUCH_H__
#include "rtthread.h"
#include "rtdevice.h"
#define TOUCH_DBG_LEVEL DBG_ERROR
#define IIC_RETRY_NUM 2
#define TOUCH_EVENT_UP (0x01)
#define TOUCH_EVENT_DOWN (0x02)
#define TOUCH_EVENT_MOVE (0x03)
#define TOUCH_EVENT_NONE (0x80)
struct touch_message
{
rt_uint16_t x;
rt_uint16_t y;
rt_uint8_t event;
};
typedef struct touch_message *touch_msg_t;
struct touch_ops
{
void (* isr_enable)(rt_bool_t);
rt_err_t (* read_point)(touch_msg_t);
void (* init)(struct rt_i2c_bus_device *);
void (* deinit)(void);
};
typedef struct touch_ops *touch_ops_t;
struct touch_drivers
{
rt_list_t list;
unsigned char address;
rt_bool_t (*probe)(struct rt_i2c_bus_device *i2c_bus);
rt_sem_t isr_sem;
touch_ops_t ops;
void *user_data;
};
typedef struct touch_drivers *touch_drv_t;
extern void rt_touch_drivers_register(touch_drv_t drv);
#endif

View File

@ -0,0 +1,28 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-01-08 zylx first version
*/
#ifndef __LCD_PORT_DSI_H__
#define __LCD_PORT_DSI_H__
#define LCD_HEIGHT 390
#define LCD_WIDTH 390
#define LCD_BITS_PER_PIXEL 24
#define LCD_PIXEL_FORMAT RTGRAPHIC_PIXEL_FORMAT_ARGB888
#define LCD_DSI_BUF_SIZE 608400
#define LCD_DSI_BUF_SIZE_ROUND 365040
#define LAYER_ADDRESS GFXMMU_VIRTUAL_BUFFER0_BASE
#define BRIGHTNESS_MIN 50
#define BRIGHTNESS_NORMAL 200
#define LCD_BACKLIGHT_USING_GPIO
#define LCD_BL_GPIO_NUM GET_PIN(B, 14)
#endif /* __LCD_PORT_DSI_H__ */

View File

@ -0,0 +1,35 @@
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-04 zylx The first version for STM32F4xx
*/
#ifndef __SDRAM_PORT_H__
#define __SDRAM_PORT_H__
/* parameters for sdram peripheral */
/* Bank1 */
#define SRAM_TARGET_BANK 1
/* stm32f4 Bank1:0x60000000 */
#define SRAM_BANK_ADDR ((uint32_t)0x60000000)
/* data width: 8, 16, 32 */
#define SRAM_DATA_WIDTH 16
/* sram size */
#define SRAM_SIZE ((uint32_t)0x200000)
/* Timing configuration for IS61WV102416BLL-10MLI */
#define ADDRESSSETUPTIME 2
#define ADDRESSHOLDTIME 1
#define DATASETUPTIME 1
#define DATAHOLDTIME 1
#define BUSTURNAROUNDDURATION 0
#define CLKDIVISION 2
#define DATALATENCY 2
#define ACCESSMODE FMC_ACCESS_MODE_A
/* Timing configuration for IS61WV102416BLL-10MLI */
#endif

View File

@ -73,7 +73,7 @@
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>1</tvExp>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
@ -117,26 +117,6 @@
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMRTXEVENTFLAGS</Key>
<Name>-L70 -Z18 -C0 -M0 -T1</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGTARM</Key>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMDBGFLAGS</Key>
<Name></Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
<Name>(105=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>UL2CM3</Key>
@ -145,7 +125,7 @@
<SetRegEntry>
<Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U0668FF504955857567074018 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32L4Rx_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32L4R9AIIx$CMSIS\Flash\STM32L4Rx_2048.FLM)</Name>
<Name>-U0668FF504955857567074018 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32L4Rx_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32L4R9AIIx$CMSIS\Flash\STM32L4Rx_2048.FLM)</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>
@ -155,12 +135,12 @@
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>1</aLwin>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>1</viewmode>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
@ -310,8 +290,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\memheap.c</PathWithFileName>
<FilenameWithoutPath>memheap.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -411,7 +391,7 @@
<Group>
<GroupName>Drivers</GroupName>
<tvExp>1</tvExp>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
@ -570,6 +550,42 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\i2c\i2c_core.c</PathWithFileName>
<FilenameWithoutPath>i2c_core.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\i2c\i2c_dev.c</PathWithFileName>
<FilenameWithoutPath>i2c_dev.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\i2c\i2c-bit-ops.c</PathWithFileName>
<FilenameWithoutPath>i2c-bit-ops.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
<FilenameWithoutPath>pin.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
@ -577,7 +593,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>29</FileNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -589,7 +605,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>30</FileNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -601,7 +617,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>31</FileNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -613,7 +629,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -625,7 +641,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -637,7 +653,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -649,7 +665,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -661,7 +677,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>36</FileNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -681,7 +697,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -693,7 +709,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>38</FileNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -705,7 +721,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>39</FileNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -717,7 +733,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>40</FileNumber>
<FileNumber>43</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -729,7 +745,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>41</FileNumber>
<FileNumber>44</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -741,7 +757,7 @@
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>42</FileNumber>
<FileNumber>45</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -761,7 +777,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>43</FileNumber>
<FileNumber>46</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -773,7 +789,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>44</FileNumber>
<FileNumber>47</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -785,7 +801,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>45</FileNumber>
<FileNumber>48</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -797,7 +813,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>46</FileNumber>
<FileNumber>49</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -809,7 +825,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>47</FileNumber>
<FileNumber>50</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -821,7 +837,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>48</FileNumber>
<FileNumber>51</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -833,7 +849,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>49</FileNumber>
<FileNumber>52</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -845,7 +861,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>50</FileNumber>
<FileNumber>53</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -857,7 +873,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>51</FileNumber>
<FileNumber>54</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -869,7 +885,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>52</FileNumber>
<FileNumber>55</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -881,7 +897,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>53</FileNumber>
<FileNumber>56</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -893,7 +909,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>54</FileNumber>
<FileNumber>57</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -905,7 +921,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>55</FileNumber>
<FileNumber>58</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -917,7 +933,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>56</FileNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -929,7 +945,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>57</FileNumber>
<FileNumber>60</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -941,7 +957,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>58</FileNumber>
<FileNumber>61</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -953,19 +969,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_sram.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>60</FileNumber>
<FileNumber>62</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -977,7 +981,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>61</FileNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -989,7 +993,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>62</FileNumber>
<FileNumber>64</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1001,7 +1005,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>63</FileNumber>
<FileNumber>65</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1013,7 +1017,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>64</FileNumber>
<FileNumber>66</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1023,6 +1027,30 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>67</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_i2c.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>68</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_i2c_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
</ProjectOpt>

View File

@ -49,7 +49,7 @@
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
<OutputName>rt-thread</OutputName>
<OutputName>rtthread</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
@ -338,7 +338,7 @@
<MiscControls></MiscControls>
<Define>USE_HAL_DRIVER, STM32L4R9xx</Define>
<Undefine></Undefine>
<IncludePath>.;..\..\..\include;applications\E;applications\:;..\..\..\..;applications\r;applications\t;applications\-;applications\t;applications\h;applications\r;applications\e;applications\a;applications\d;..\..\..\..;applications\b;applications\s;applications\p;..\..\..\..;applications\s;applications\t;applications\m;applications\3;applications\2;..\..\..\..;applications\s;applications\t;applications\m;applications\3;applications\2;applications\l;applications\4;applications\r;applications\9;applications\-;applications\s;applications\t;applications\-;applications\e;applications\v;applications\a;applications\l;..\..\..\..;applications\a;applications\p;applications\p;applications\l;applications\i;applications\c;applications\a;applications\t;applications\i;applications\o;applications\n;applications\s;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
<IncludePath>.;..\..\..\include;applications;board;board\CubeMX_Config\Inc;board\ports\include;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
</VariousControls>
</Cads>
<Aads>
@ -423,9 +423,9 @@
<FilePath>..\..\..\src\kservice.c</FilePath>
</File>
<File>
<FileName>mem.c</FileName>
<FileName>memheap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\src\mem.c</FilePath>
<FilePath>..\..\..\src\memheap.c</FilePath>
</File>
<File>
<FileName>mempool.c</FileName>
@ -537,6 +537,21 @@
<Group>
<GroupName>DeviceDrivers</GroupName>
<Files>
<File>
<FileName>i2c_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c_core.c</FilePath>
</File>
<File>
<FileName>i2c_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c_dev.c</FilePath>
</File>
<File>
<FileName>i2c-bit-ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath>
</File>
<File>
<FileName>pin.c</FileName>
<FileType>1</FileType>
@ -702,11 +717,6 @@
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_sram.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_gpio.c</FileName>
<FileType>1</FileType>
@ -732,6 +742,16 @@
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_i2c_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath>
</File>
</Files>
</Group>
</Groups>

View File

@ -30,7 +30,8 @@
/* Memory Management */
#define RT_USING_MEMPOOL
#define RT_USING_SMALL_MEM
#define RT_USING_MEMHEAP
#define RT_USING_MEMHEAP_AS_HEAP
#define RT_USING_HEAP
/* Kernel Device Object */
@ -80,6 +81,8 @@
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
/* Using WiFi */
@ -96,6 +99,9 @@
/* Socket abstraction layer */
/* Network interface device */
/* light weight TCP/IP stack */
@ -113,11 +119,6 @@
/* RT-Thread online packages */
/* system packages */
/* RT-Thread GUI Engine */
/* IoT - internet of things */
@ -129,6 +130,9 @@
/* Wiced WiFi */
/* IoT Cloud */
/* security packages */
@ -141,10 +145,16 @@
/* tools packages */
/* system packages */
/* peripheral libraries and drivers */
/* miscellaneous packages */
/* example package: hello */
/* samples: kernel and components samples */
#define SOC_FAMILY_STM32
#define SOC_SERIES_STM32L4
@ -155,6 +165,11 @@
/* Onboard Peripheral Drivers */
#define BSP_USING_STLINK_TO_USART
/* Enable Touch */
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO

View File

@ -125,7 +125,7 @@
<SetRegEntry>
<Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U0668FF504955857567074018 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32L4Rx_2048 -FS08000000 -FL0200000 -FP0($$Device:STM32L4R9AIIx$CMSIS\Flash\STM32L4Rx_2048.FLM)</Name>
<Name>-U0668FF504955857567074018 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32L4Rx_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32L4R9AIIx$CMSIS\Flash\STM32L4Rx_2048.FLM)</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>

View File

@ -49,7 +49,7 @@
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
<OutputName>rt-thread</OutputName>
<OutputName>rtthread</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>