From 46b9be6038f2456a2e16d1866934aec1b94f34a7 Mon Sep 17 00:00:00 2001 From: liang yongxiang Date: Tue, 29 May 2018 12:52:22 +0800 Subject: [PATCH 1/2] [libcpu] remove nds32 porting --- libcpu/nds32/context_gcc.S | 188 ---------------------------------- libcpu/nds32/cpuport.c | 202 ------------------------------------- 2 files changed, 390 deletions(-) delete mode 100644 libcpu/nds32/context_gcc.S delete mode 100644 libcpu/nds32/cpuport.c diff --git a/libcpu/nds32/context_gcc.S b/libcpu/nds32/context_gcc.S deleted file mode 100644 index 8d5f3287e9..0000000000 --- a/libcpu/nds32/context_gcc.S +++ /dev/null @@ -1,188 +0,0 @@ -#include "nds32.h" -#include "os_cpu_common.h" -#include "config.h" - - .align 4 -! void rt_hw_context_switch(rt_uint32 from, rt_uint32 to); -! R0 --> from -! R1 --> to - .section .text - .global rt_hw_context_switch_interrupt - .global rt_hw_context_switch -rt_hw_context_switch_interrupt: -rt_hw_context_switch: - push25 $r6,#8 ! {$r6, $fp, $gp, $lp} - - la $r2, rt_thread_switch_interrupt_flag - lw $r3, [$r2] - movi $r4, #1 - beq $r3, $r4, _reswitch - sw $r4, [$r2] ! set rt_thread_switch_interrupt_flag to 1 - - la $r2, rt_interrupt_from_thread - sw $r0, [$r2] ! set rt_interrupt_from_thread -_reswitch: - la $r2, rt_interrupt_to_thread - sw $r1, [$r2] ! set rt_interrupt_to_thread - bal hal_intc_swi_trigger ! trigger the swi exception (causes context switch) - - pop25 $r6,#8 ! {$r6, $fp, $gp, $lp} - -! R0 --> switch from thread stack -! R1 --> switch to thread stack -! psr, pc, LR, R12, R3, R2, R1, R0 are pushed into [from] stack - - .align 4 - .global OS_Trap_Interrupt_SWI -OS_Trap_Interrupt_SWI: -! pushm $r0, $r5 - setgie.d ! disable interrupt to protect context switch - dsb - - IntlDescend ! Descend interrupt level - - movi $r0, 0x0 - mtsr $r0, $INT_PEND ! clean SWI pending - - la $r0, rt_thread_switch_interrupt_flag ! get rt_thread_switch_interrupt_flag - lw $r1, [$r0] - beqz $r1, pendsv_exit ! swi has already been handled - - movi $r1, #0 - sw $r1, [$r0] ! clear rt_thread_switch_interrupt_flag to 0 - - la $r0, rt_interrupt_from_thread - lw $r1, [$r0] - beqz $r1, switch_to_thread ! skip register save at the first time(os startup phase) - - SAVE_ALL - - move $r1, $sp - la $r0, rt_interrupt_from_thread - lw $r0, [$r0] - sw $r1, [$r0] - -switch_to_thread: - la $r1, rt_interrupt_to_thread - lw $r1, [$r1] - lw $r1, [$r1] ! load thread stack pointer - move $sp, $r1 ! update stack pointer - RESTORE_ALL ! pop registers - -pendsv_exit: - setgie.e - iret - - .align 4 -! void rt_hw_context_switch_to(rt_uint32 to); -! R0 --> to - .global rt_hw_context_switch_to -rt_hw_context_switch_to: - la $r1, rt_interrupt_to_thread - sw $r0, [$r1] - - ! set from thread to 0 - la $r1, rt_interrupt_from_thread - movi $r0, #0 - sw $r0, [$r1] - - ! set interrupt flag to 1 - la $r1, rt_thread_switch_interrupt_flag - movi $r0, #1 - sw $r0, [$r1] - - ! set the SWI exception priority(must be the lowest level) - ! todo - - ! trigger the SWI exception (causes context switch) - jal hal_intc_swi_trigger - - setgie.e ! enable interrupts at processor level - -1: - b 1b ! never reach here - -#ifndef VECTOR_NUMINTRS -#define VECTOR_NUMINTRS 32 -#endif - - .global OS_Trap_Int_Common - - ! Set up Interrupt vector ISR - ! HW#IRQ_SWI_VECTOR : OS_Trap_Interrupt_SWI (SWI) - ! HW#n : OS_Trap_Int_Common - - .macro SET_HWISR num - .global OS_Trap_Interrupt_HW\num - .if \num == IRQ_SWI_VECTOR - .set OS_Trap_Interrupt_HW\num, OS_Trap_Interrupt_SWI - .else - .set OS_Trap_Interrupt_HW\num, OS_Trap_Int_Common - .endif - .endm - - .altmacro - .set irqno, 0 - .rept VECTOR_NUMINTRS - SET_HWISR %irqno - .set irqno, irqno+1 - .endr - .noaltmacro - -! .global OS_Trap_Int_Common -OS_Trap_Int_Common: -#ifdef MPU_SUPPORT - mfsr $p1, $PSW - ori $p1, $p1, (PSW_mskIT | PSW_mskDT) - mtsr $p1, $PSW ! enable IT/DT - dsb - pushm $r0, $r5 - move $r0, $p0 ! IRQ number -#endif - ! $r0 : HW Interrupt vector number - SAVE_CALLER - - IntlDescend ! Descend interrupt level - - mfsr $r1, $IPSW ! Use IPSW.CPL to check come from thread or ISR - srli45 $r1, #PSW_offCPL - fexti33 $r1, #0x2 ! IPSW.CPL - bnec $r1, #0x7, 2f ! IPSW.CPL != 7, come form ISR, reentrant - - move $fp, $sp ! save old stack pointer - la $sp, __OS_Int_Stack ! switch to interrupt stack -2: - setgie.e ! allow nested now - - ! The entire CPU state is now stashed on the stack, - ! and the stack is also 8-byte alignment. - ! We can call C program based interrupt handler now. - la $r1, OS_CPU_Vector_Table - lw $r1, [$r1+($r0<<2)] ! ISR function pointer - jral $r1 ! Call ISR - - la $r1, __OS_Int_Stack ! Check for nested interruption return - bne $r1, $sp, 3f ! $sp != __OS_Int_Stack? - - move $sp, $fp ! Move back to the thread stack -3: - RESTORE_CALLER - - iret - -! .set OS_Trap_Interrupt_HW9, OS_Trap_Interrupt_SWI -! .set OS_Trap_Interrupt_HW19, OS_Trap_Int_Common - -!********************************************* -! POINTERS TO VARIABLES -!********************************************* -#ifdef MPU_SUPPORT - .section privileged_data -#else - .section .bss -#endif - .skip IRQ_STACK_SIZE - .align 3 -__OS_Int_Stack: - - .end diff --git a/libcpu/nds32/cpuport.c b/libcpu/nds32/cpuport.c deleted file mode 100644 index af113f673b..0000000000 --- a/libcpu/nds32/cpuport.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * File : cpuport.c - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * Change Logs: - * Date Author Notes - * 2017-08-25 Archer first version - */ - -#include - -#include "nds32.h" - -/* - * Initialise the stack of a task to look exactly as if a call to - * SAVE_CONTEXT had been called. - * - * See header file for description. - * - * - * Stack Layout: - * High |-----------------| - * | $R5 | - * |-----------------| - * | . | - * | . | - * |-----------------| - * | $R0 | - * |-----------------| - * | $R30 (LP) | - * |-----------------| - * | $R29 (GP) | - * |-----------------| - * | $R28 (FP) | - * |-----------------| - * | $R15 $R27 | - * |-----------------| - * | $R10 $R26 | - * |-----------------| - * | . | - * | . | - * |-----------------| - * | $R6 | - * |-----------------| - * | $IFC_LP | (Option) - * |-----------------| - * | $LC/$LE/$LB | (Option) - * | (ZOL) | - * |-----------------| - * | $IPSW | - * |-----------------| - * | $IPC | - * |-----------------| - * | Dummy word | (Option, only exist when IFC & ZOL both configured) - * |-----------------| - * | $FPU | (Option) - * |-----------------| - * Low - * - */ - -struct stack_frame -{ - rt_uint32_t topOfStack[34]; -}; - -/* flag in interrupt handling */ -rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread; -rt_uint32_t rt_thread_switch_interrupt_flag; -/* exception hook */ -static rt_err_t (*rt_exception_hook)(void *context) = RT_NULL; - -rt_base_t rt_hw_interrupt_disable(void) -{ - rt_base_t level = __nds32__mfsr(NDS32_SR_PSW); - - GIE_DISABLE(); - - return level; -} - -void rt_hw_interrupt_enable(rt_base_t level) -{ - if (level & PSW_mskGIE) - GIE_ENABLE(); -} - -/* For relax support, must initial $gp at task init*/ -extern uint32_t _SDA_BASE_ __attribute__ ((weak)); - -/************************************************************** - * This function will initialize thread stack - * - * @param tentry the entry of thread - * @param parameter the parameter of entry - * @param stack_addr the beginning stack address - * @param texit the function will be called when thread exit - * - * @return stack address - **************************************************************/ -rt_uint8_t *rt_hw_stack_init(void *tentry, - void *parameter, - rt_uint8_t *stack_addr, - void *texit) -{ - rt_int32_t i; - rt_uint32_t *pxTopOfStack; - - pxTopOfStack = (rt_uint32_t *)RT_ALIGN_DOWN((rt_uint32_t)stack_addr, 4); - - /* Simulate the stack frame as it would be created by a context switch */ - /* R0 ~ R5 registers */ - for (i = 5; i >= 1; i--) /* R5, R4, R3, R2 and R1. */ - *--pxTopOfStack = (rt_uint32_t)0x01010101UL * i; - *--pxTopOfStack = (rt_uint32_t)parameter; /* R0 : Argument */ - - /* R6 ~ R30 registers */ - *--pxTopOfStack = (rt_uint32_t)texit; /* R30: $LP */ - *--pxTopOfStack = (rt_uint32_t)&_SDA_BASE_; /* R29: $GP */ - *--pxTopOfStack = (rt_uint32_t)0x2828282828; /* R28: $FP */ -#ifdef __NDS32_REDUCE_REGS__ - *--pxTopOfStack = (rt_uint32_t)0x1515151515; /* R15 */ - for (i = 10; i >= 6; i--) /* R10 ~ R6 */ - *--pxTopOfStack = (rt_uint32_t)0x01010101UL * i; -#else - for (i = 27; i >= 6; i--) /* R27 ~ R6 */ - *--pxTopOfStack = (rt_uint32_t)0x01010101UL * i; -#endif - - /* IFC system register */ -#ifdef __TARGET_IFC_EXT - *--pxTopOfStack = (rt_uint32_t)0x0; /* $IFC_LP */ -#endif - - /* ZOL system registers */ -#ifdef __TARGET_ZOL_EXT - *--pxTopOfStack = (rt_uint32_t)0x0; /* $LC */ - *--pxTopOfStack = (rt_uint32_t)0x0; /* $LE */ - *--pxTopOfStack = (rt_uint32_t)0x0; /* $LB */ -#endif - - /* IPSW and IPC system registers */ - /* Default IPSW: enable GIE, set CPL to 7, clear IFCON */ - i = (__nds32__mfsr(NDS32_SR_PSW) | PSW_mskGIE | PSW_mskCPL) & ~PSW_mskIFCON; - *--pxTopOfStack = (rt_uint32_t)i; /* $IPSW */ - *--pxTopOfStack = (rt_uint32_t)tentry; /* $IPC */ - - /* Dummy word for 8-byte stack alignment */ -#if defined(__TARGET_IFC_EXT) && defined(__TARGET_ZOL_EXT) - *--pxTopOfStack = (rt_uint32_t)0xFFFFFFFF; /* Dummy */ -#endif - - /* FPU registers */ -#ifdef __TARGET_FPU_EXT - for (i = 0; i < FPU_REGS; i++) - *--pxTopOfStack = (rt_uint32_t)0x0; /* FPU */ -#endif - - return (rt_uint8_t *)pxTopOfStack; -} - -/** - * This function set the hook, which is invoked on fault exception handling. - * - * @param exception_handle the exception handling hook function. - */ -void rt_hw_exception_install(rt_err_t (*exception_handle)(void* context)) -{ - rt_exception_hook = exception_handle; -} - -#ifdef RT_USING_CPU_FFS -/** - * This function finds the first bit set (beginning with the least significant bit) - * in value and return the index of that bit. - * - * Bits are numbered starting at 1 (the least significant bit). A return value of - * zero from any of these functions means that the argument was zero. - * - * @return return the index of the first bit set. If value is 0, then this function - * shall return 0. - */ -#if defined(__GNUC__) -int __rt_ffs(int value) -{ - return __builtin_ffs(value); -} -#endif - -#endif From 6605b65ef0471ae917093241e0592d40bf7f375d Mon Sep 17 00:00:00 2001 From: liang yongxiang Date: Tue, 29 May 2018 12:53:48 +0800 Subject: [PATCH 2/2] [bsp] remove AE210P bsp --- bsp/AE210P/Makefile | 301 --- bsp/AE210P/README.md | 51 - bsp/AE210P/application.c | 136 -- bsp/AE210P/board.c | 95 - bsp/AE210P/board.h | 28 - bsp/AE210P/board/ae210p.c | 338 ---- bsp/AE210P/board/ae210p.h | 74 - bsp/AE210P/board/ae210p.ld | 202 -- bsp/AE210P/board/ae210p.sag | 68 - bsp/AE210P/board/ae210p_defs.h | 306 --- bsp/AE210P/board/ae210p_regs.h | 315 --- bsp/AE210P/board/uart_dev.c | 212 --- bsp/AE210P/board/uart_dev.h | 23 - bsp/AE210P/bsp_hal.h | 77 - bsp/AE210P/cache.c | 273 --- bsp/AE210P/cache.h | 45 - bsp/AE210P/config.h | 48 - bsp/AE210P/debug.h | 78 - bsp/AE210P/driver/dma/Kbuild | 2 - bsp/AE210P/driver/dma/dmad.c | 2513 ------------------------ bsp/AE210P/driver/dma/dmad.h | 275 --- bsp/AE210P/driver/gpio/gpio.c | 86 - bsp/AE210P/driver/gpio/gpio.h | 52 - bsp/AE210P/driver/lcd/Kbuild | 1 - bsp/AE210P/driver/lcd/font.c | 248 --- bsp/AE210P/driver/lcd/lcd-info.h | 114 -- bsp/AE210P/driver/lcd/lcd.c | 142 -- bsp/AE210P/driver/lcd/lcd.h | 29 - bsp/AE210P/driver/osc/osc.c | 74 - bsp/AE210P/driver/osc/osc.h | 77 - bsp/AE210P/driver/sd/Kbuild | 3 - bsp/AE210P/driver/sd/sd.h | 143 -- bsp/AE210P/driver/sd/sdd.c | 2951 ----------------------------- bsp/AE210P/driver/sd/sdd.h | 219 --- bsp/AE210P/driver/sd/sdd_sd.c | 2662 -------------------------- bsp/AE210P/driver/sd/sdd_sd.h | 927 --------- bsp/AE210P/driver/ssp/Kbuild | 1 - bsp/AE210P/driver/ssp/sspd_ac97.c | 300 --- bsp/AE210P/driver/ssp/sspd_ac97.h | 444 ----- bsp/AE210P/driver/ssp/sspd_rts.c | 456 ----- bsp/AE210P/driver/ssp/sspd_rts.h | 199 -- bsp/AE210P/driver/uart/Kbuild | 2 - bsp/AE210P/driver/uart/uart.c | 143 -- bsp/AE210P/driver/uart/uart.h | 17 - bsp/AE210P/nds32.h | 80 - bsp/AE210P/nds32_defs.h | 1362 ------------- bsp/AE210P/os_cpu_common.h | 426 ----- bsp/AE210P/os_except.c | 54 - bsp/AE210P/os_except.h | 23 - bsp/AE210P/reset.c | 138 -- bsp/AE210P/rtconfig.h | 199 -- bsp/AE210P/start.S | 197 -- bsp/AE210P/startup.c | 113 -- 53 files changed, 17342 deletions(-) delete mode 100644 bsp/AE210P/Makefile delete mode 100644 bsp/AE210P/README.md delete mode 100644 bsp/AE210P/application.c delete mode 100644 bsp/AE210P/board.c delete mode 100644 bsp/AE210P/board.h delete mode 100644 bsp/AE210P/board/ae210p.c delete mode 100644 bsp/AE210P/board/ae210p.h delete mode 100644 bsp/AE210P/board/ae210p.ld delete mode 100644 bsp/AE210P/board/ae210p.sag delete mode 100644 bsp/AE210P/board/ae210p_defs.h delete mode 100644 bsp/AE210P/board/ae210p_regs.h delete mode 100644 bsp/AE210P/board/uart_dev.c delete mode 100644 bsp/AE210P/board/uart_dev.h delete mode 100644 bsp/AE210P/bsp_hal.h delete mode 100644 bsp/AE210P/cache.c delete mode 100644 bsp/AE210P/cache.h delete mode 100644 bsp/AE210P/config.h delete mode 100644 bsp/AE210P/debug.h delete mode 100644 bsp/AE210P/driver/dma/Kbuild delete mode 100644 bsp/AE210P/driver/dma/dmad.c delete mode 100644 bsp/AE210P/driver/dma/dmad.h delete mode 100644 bsp/AE210P/driver/gpio/gpio.c delete mode 100644 bsp/AE210P/driver/gpio/gpio.h delete mode 100644 bsp/AE210P/driver/lcd/Kbuild delete mode 100644 bsp/AE210P/driver/lcd/font.c delete mode 100644 bsp/AE210P/driver/lcd/lcd-info.h delete mode 100644 bsp/AE210P/driver/lcd/lcd.c delete mode 100644 bsp/AE210P/driver/lcd/lcd.h delete mode 100644 bsp/AE210P/driver/osc/osc.c delete mode 100644 bsp/AE210P/driver/osc/osc.h delete mode 100644 bsp/AE210P/driver/sd/Kbuild delete mode 100644 bsp/AE210P/driver/sd/sd.h delete mode 100644 bsp/AE210P/driver/sd/sdd.c delete mode 100644 bsp/AE210P/driver/sd/sdd.h delete mode 100644 bsp/AE210P/driver/sd/sdd_sd.c delete mode 100644 bsp/AE210P/driver/sd/sdd_sd.h delete mode 100644 bsp/AE210P/driver/ssp/Kbuild delete mode 100644 bsp/AE210P/driver/ssp/sspd_ac97.c delete mode 100644 bsp/AE210P/driver/ssp/sspd_ac97.h delete mode 100644 bsp/AE210P/driver/ssp/sspd_rts.c delete mode 100644 bsp/AE210P/driver/ssp/sspd_rts.h delete mode 100644 bsp/AE210P/driver/uart/Kbuild delete mode 100644 bsp/AE210P/driver/uart/uart.c delete mode 100644 bsp/AE210P/driver/uart/uart.h delete mode 100644 bsp/AE210P/nds32.h delete mode 100644 bsp/AE210P/nds32_defs.h delete mode 100644 bsp/AE210P/os_cpu_common.h delete mode 100644 bsp/AE210P/os_except.c delete mode 100644 bsp/AE210P/os_except.h delete mode 100644 bsp/AE210P/reset.c delete mode 100644 bsp/AE210P/rtconfig.h delete mode 100644 bsp/AE210P/start.S delete mode 100644 bsp/AE210P/startup.c diff --git a/bsp/AE210P/Makefile b/bsp/AE210P/Makefile deleted file mode 100644 index 778015bb92..0000000000 --- a/bsp/AE210P/Makefile +++ /dev/null @@ -1,301 +0,0 @@ -#************************************************************ -# RT-Thread RTOS makefile base on Andes N1068A core -# -# Mengxin Technology Co., Ltd. -# Archer Chang -# 2017.07.25 16:00 -# -#************************************************************ - -CROSS_COMPILE ?= nds32le-elf- -SIZE_OUTPUTS = .PHONY.size - -CC := $(CROSS_COMPILE)gcc -OBJCOPY := $(CROSS_COMPILE)objcopy -AR := $(CROSS_COMPILE)ar -AS := $(CROSS_COMPILE)as - -ifeq ($(DEBUG),1) - OPTIM := -O0 -g2 -else - OPTIM := -O2 -g0 -endif - -ROOT_PATH := . -RTOS_PATH := $(ROOT_PATH)/../.. -ARCH_PATH := $(RTOS_PATH)/libcpu -KERNEL_PATH := $(RTOS_PATH)/src -COMPONENTS_PATH := $(RTOS_PATH)/components -COMPONENTS_INIT_PATH := $(COMPONENTS_PATH)/init -COMPONENTS_DRV_PATH := $(COMPONENTS_PATH)/drivers -COMPONENTS_DRVSRC_PATH := $(COMPONENTS_DRV_PATH)/src -COMPONENTS_DRVINC_PATH := $(COMPONENTS_DRV_PATH)/include -COMPONENTS_DRVINC_DRV_PATH := $(COMPONENTS_DRVINC_PATH)/drivers -BSP_PATH := $(RTOS_PATH)/bsp -CLI_PATH := $(COMPONENTS_PATH)/finsh - -PLATFORM_PATH := $(BSP_PATH)/AE210P -ARCH_SEL_PATH := $(ARCH_PATH)/nds32 -CONFIG_PATH := $(PLATFORM_PATH) -BOARD_PATH := $(PLATFORM_PATH)/board -#LIBC_PATH := $(PLATFORM_PATH)/libc -LDSCRIPT := $(BOARD_PATH)/ae210p.ld -CONFIG_H := $(CONFIG_PATH)/config.h -PLATFORM_DEF := -DAE210P -ARCH_INCLUDE_PATH := $(ARCH_PATH)/nds32 - -HW_HAL_SRC := $(BOARD_PATH)/ae210p.c \ - $(PLATFORM_PATH)/board.c \ - $(ARCH_SEL_PATH)/cpuport.c \ - $(PLATFORM_PATH)/startup.c \ - $(PLATFORM_PATH)/application.c - -DRIVERS_PATH := $(PLATFORM_PATH)/driver - -OS_DEF := -DCONFIG_OS_RTTHREAD -INCLUDE_PATH := \ - -I$(RTOS_PATH) \ - -I$(ARCH_INCLUDE_PATH) \ - -I$(RTOS_PATH)/include \ - -I${KERNEL_PATH} \ - -I$(CONFIG_PATH) \ - -I$(PLATFORM_PATH) \ - -I$(BOARD_PATH) \ - -I$(DRIVERS_PATH) \ - -I$(CLI_PATH) \ - -I$(COMPONENTS_DRVINC_PATH) \ - -I$(COMPONENTS_DRVINC_DRV_PATH) \ - -I$(COMPONENTS_INIT_PATH) - -SMALL_HEAP_DEF := - -#Check GCC version -VERSION := $(shell $(CC) --version | grep ^$(CC) | sed 's/^.* //g') -GCC_VERSION := $(shell echo $(VERSION)| sed -e 's/\.\([0-9][0-9]\)/\1/g' -e 's/\.\([0-9]\)/0\1/g' -e 's/^[0-9]\{3,4\}$$/&00/' ) - -# GCC version before 4.8.2 doesn't support -mcmodel -ifneq ($(shell expr `echo $(GCC_VERSION)` \< 40802 ),1) - CMODEL := -mcmodel=large -endif - -CFLAGS := \ - $(INCLUDE_PATH) \ - -Wall \ - $(PLATFORM_DEF) \ - $(OS_DEF) \ - $(SMALL_HEAP_DEF) \ - -fno-builtin -fomit-frame-pointer -funroll-loops \ - -fno-strict-aliasing -ffunction-sections \ - $(CMODEL) \ - $(OPTIM) \ - $(OSC_DEF) \ - $(CFLAGS_EXT) - -LD_FLAGS := $(OPTIM) -fno-builtin -nostartfiles -static -Wl,--gc-sections $(CMODEL) -AFLAGS := -fno-builtin - -# Add `-fno-delete-null-pointer-checks` flag if the compiler supports it. -# GCC assumes that programs cannot safely dereference null pointers, -# and that no code or data element resides there. -# However, 0x0 is the vector table memory location, so the test must not be removed. -ifeq ($(shell $(CC) -fno-delete-null-pointer-checks -E - 2>/dev/null >/dev/null /dev/null && echo IFC),IFC) - ifeq ($(NO_IFC),y) - CFLAGS += -mno-ifc -DCONFIG_NO_NDS32_EXT_IFC - LD_FLAGS += -Wl,--mno-ifc - endif -else - ifneq ($(NO_IFC),) - $(error this toolchain do not support IFC extension) - endif -endif - -ifeq ($(shell echo | $(CC) -E -dM - | grep __NDS32_EXT_EX9__ > /dev/null && echo EX9),EX9) - ifeq ($(NO_EX9),y) - CFLAGS += -mno-ex9 -DCONFIG_NO_NDS32_EXT_EX9 - LD_FLAGS += -Wl,--mno-ex9 - endif -else - ifneq ($(NO_EX9),) - $(error this toolchain do not support EX9 extension) - endif -endif - -ifeq ($(CACHE),1) - CFLAGS += -DCONFIG_CACHE_SUPPORT -endif - - -# add INTC check -ifeq ($(EXT_INTC),1) - CFLAGS += -DCONFIG_EXT_INTC -endif - -# HWZOL check -ifeq ($(HWZOL),1) - ifeq ($(shell echo | $(CC) -E -dM -mext-zol - | grep '\<__NDS32_EXT_ZOL__\>' > /dev/null && echo "ZOL"), ZOL) - CFLAGS += -DCONFIG_HWZOL - LD_FLAGS += -mext-zol - else - $(error this toolchain do not support ZOL extension) - endif -endif - -RTOS_SRC := \ - $(KERNEL_PATH)/clock.c \ - $(KERNEL_PATH)/device.c \ - $(KERNEL_PATH)/idle.c \ - $(KERNEL_PATH)/ipc.c \ - $(KERNEL_PATH)/irq.c \ - $(KERNEL_PATH)/kservice.c \ - $(KERNEL_PATH)/mem.c \ - $(KERNEL_PATH)/mempool.c \ - $(KERNEL_PATH)/scheduler.c \ - $(KERNEL_PATH)/thread.c \ - $(KERNEL_PATH)/timer.c \ - $(KERNEL_PATH)/object.c \ - -NDS32_SRC := \ - $(PLATFORM_PATH)/reset.c \ - $(PLATFORM_PATH)/cache.c \ - $(HW_HAL_SRC) \ - -BOOT_SRC := \ - $(PLATFORM_PATH)/start.S \ - $(ARCH_SEL_PATH)/context_gcc.S - -CLI_SRC := -ifeq ($(USING_CLI),1) - CLI_SRC += $(KERNEL_PATH)/components.c \ - $(COMPONENTS_DRVSRC_PATH)/ringbuffer.c \ - $(COMPONENTS_DRVSRC_PATH)/completion.c \ - $(COMPONENTS_DRVSRC_PATH)/dataqueue.c \ - $(CLI_PATH)/cmd.c \ - $(CLI_PATH)/finsh_compiler.c \ - $(CLI_PATH)/finsh_error.c \ - $(CLI_PATH)/finsh_heap.c \ - $(CLI_PATH)/finsh_init.c \ - $(CLI_PATH)/finsh_node.c \ - $(CLI_PATH)/finsh_ops.c \ - $(CLI_PATH)/finsh_parser.c \ - $(CLI_PATH)/finsh_token.c \ - $(CLI_PATH)/finsh_var.c \ - $(CLI_PATH)/finsh_vm.c \ - $(CLI_PATH)/msh.c \ - $(CLI_PATH)/msh_cmd.c \ - $(CLI_PATH)/shell.c \ - $(CLI_PATH)/symbol.c -endif - -#DRIVER_SRC := \ - ${UART_DRIVER_SRC} \ - ${LCD_DRIVER_SRC} \ - ${SD_DRIVER_SRC} \ - ${TOUCHSCREEN_DRIVER_SRC} \ - ${AC97_DRIVER_SRC} \ - ${DMA_DRIVER_SRC} \ - ${HAL_DRIVER_SRC} \ - -DRIVER_SRC := \ - $(PLATFORM_PATH)/driver/uart/uart.c \ - $(PLATFORM_PATH)/driver/gpio/gpio.c \ - $(BOARD_PATH)/uart_dev.c \ - $(COMPONENTS_DRV_PATH)/serial/serial.c -# $(PLATFORM_PATH)/driver/dma/dmad.c - -#LIBC_SRC := \ -# $(LIBC_PATH)/stdio/fgets.c \ -# $(LIBC_PATH)/stdio/fputs.c \ -# $(LIBC_PATH)/stdio/fprintf.c \ -# $(LIBC_PATH)/stdio/do_printf.c \ -# $(LIBC_PATH)/stdio/printf.c \ -# $(LIBC_PATH)/string/memcpy.c \ -# $(LIBC_PATH)/string/memmove.c \ -# $(LIBC_PATH)/string/memset.c \ -# $(LIBC_PATH)/string/strcat.c \ -# $(LIBC_PATH)/string/strcasecmp.c \ -# $(LIBC_PATH)/string/strcmp.c \ -# $(LIBC_PATH)/string/strcpy.c \ -# $(LIBC_PATH)/string/strdup.c \ -# $(LIBC_PATH)/string/strlen.c \ -# $(LIBC_PATH)/string/strstr.c \ -# $(LIBC_PATH)/string/strupr.c \ -# $(LIBC_PATH)/string/wchar.c \ -# $(LIBC_PATH)/stdlib/qsort.c - -#LIBC_FILE_SRC := \ -# $(LIBC_PATH)/stdio/file.c \ - -#******************************************** -# Applications -#******************************************** -APP_SRCS := - -################################################################# -# # -# Source code to each application # -# # -################################################################# -SRCS := \ - ${NDS32_SRC} \ - ${RTOS_SRC} \ - ${DRIVER_SRC} \ - ${CLI_SRC} \ - ${APP_SRCS} #\ -# ${LIBC_SRC} - -ALL_C_SRCS := ${SRCS} -ALL_AS_SRCS += ${BOOT_SRC} - -# % can match to all the strings -ALL_C_OBJS := $(patsubst %.S,%.o,$(patsubst %.c,%.o,${ALL_C_SRCS})) -ALL_AS_OBJS := $(patsubst %.S,%.o,${ALL_AS_SRCS}) - -OBJS = ${ALL_C_OBJS} ${ALL_AS_OBJS} - -.PHONY: all clean distclean - -all: ${APP}.elf ${APP}.bin $(SIZE_OUTPUTS) - if test ! -d ./build; then \ - mkdir ./build; \ - fi - mv ${APP}.elf ${APP}.bin ./build - -clean: - $(RM) $(OBJS) - $(RM) ./build/${APP}.elf ./build/${APP}.bin - -distclean: clean - $(RM) -rf build/ - -.SUFFIXES : .o .c .S - -.c.o : $(CONFIG_H) - $(CC) -include $(CONFIG_H) -c $(CFLAGS) $< -o $@ -.S.o : $(CONFIG_H) - $(CC) -include $(CONFIG_H) -c $(CFLAGS) $(AFLAGS) $< -o $@ - -${APP}.elf: $(CONFIG_H) ${KCONFIG_CONFIG} ${ALL_C_OBJS} ${ALL_AS_OBJS} - @echo ' ' - $(CC) -T$(LDSCRIPT) ${ALL_C_OBJS} ${ALL_AS_OBJS} $(LD_FLAGS) $(LFLAGS_EXT) -o $@ - @echo ' ' - -${APP}.bin: ${APP}.elf -# @echo ' ' - $(OBJCOPY) ${APP}.elf -O binary ${APP}.bin - @echo ' ' - -.PHONY.size: -# @echo ' ' - $(CROSS_COMPILE)size ${APP}.elf | tee .PHONY.size - @echo ' ' - -.PHONY: all clean distclean .PHONY.size diff --git a/bsp/AE210P/README.md b/bsp/AE210P/README.md deleted file mode 100644 index 8a396946cf..0000000000 --- a/bsp/AE210P/README.md +++ /dev/null @@ -1,51 +0,0 @@ -Andes Maintainer: **It's a very early and draft porting yet.** - -E-Mail : Archer Zhang - -## 文件（夹）添加和修改 - -1. 在bsp目录下，添加AE210P目录，这是Andes AE210P EVB（N1068A）的主目录； -2. 在libcpu目录下，添加nds32目录，这是Andes N10系列Core的体系目录； -3. 由于编译器的原因，修改了finsh.h文件的Line：74 - 75，如下 -```c - #if !(defined(__GNUC__) && defined(__x86_64__)) - //typedef unsigned int size_t; // 注释这个typedef - #include // 添加两个头文件包含 - #include - #else -``` - -4. 由于串口未使用中断接收，而是使用了查询接收，所以修改了shell.c文件，如下 -```c - a. Line：316～317 - //rt_device_set_rx_indicate(shell->device, finsh_rx_ind); - //rt_device_open(shell->device, (RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_STREAM | RT_DEVICE_FLAG_INT_RX)); - rt_device_open(shell->device, (RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_STREAM)); - - b. Line：326，注释该行 - // if (rt_sem_take(&shell->rx_sem, RT_WAITING_FOREVER) != RT_EOK) continue; - - c. Line：553，添加CPU占用的释放 - - rt_thread_delay(1); // 或者rt-schedule(); -``` - -## 工程管理 - -1. 该工程使用Makefile管理，Makefile即文件AE210P/Makefile。编译如下： -```bash - make APP=rtthread AE210P=1 USING_CLI=1 DEBUG=1 all - make APP=rtthread AE210P=1 USING_CLI=1 DEBUG=1 clean -``` - -## Tool Chain/IDE - -1. IDE：AndeSight_V300_STD - -这是一个基于Eclipse和GNU、GDB的环境，参阅对应工具/环境的标准文档即可。 - -关于创建工程和调试，请参阅《Andes工程创建和调试.docx》。 - -## 测试目标板（PCBA） - -1. AE210P EVB diff --git a/bsp/AE210P/application.c b/bsp/AE210P/application.c deleted file mode 100644 index 44e3465076..0000000000 --- a/bsp/AE210P/application.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * File : application.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-01-05 Bernard the first version - * 2013-07-12 aozima update for auto initial. - */ - -/** - * @addtogroup STM32 - */ -/*@{*/ - -#include -#include -#include - -#ifdef RT_USING_COMPONENTS_INIT -#include -#endif /* RT_USING_COMPONENTS_INIT */ - -#ifdef RT_USING_DFS -/* dfs filesystem:ELM filesystem init */ -#include -/* dfs Filesystem APIs */ -#include -#endif - -#ifdef RT_USING_RTGUI -#include -#include -#include -#include -#include -#endif - -void rt_init_thread_entry(void* parameter) -{ -#ifdef RT_USING_COMPONENTS_INIT - /* initialization RT-Thread Components */ - rt_components_init(); -#endif - - /* Filesystem Initialization */ -#if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT) - /* mount sd card fat partition 1 as root directory */ - if (dfs_mount("sd0", "/", "elm", 0, 0) == 0) - { - rt_kprintf("File System initialized!\n"); - } - else - rt_kprintf("File System initialzation failed!\n"); -#endif /* RT_USING_DFS */ - -#ifdef RT_USING_RTGUI - { - extern void rt_hw_lcd_init(); - extern void rtgui_touch_hw_init(void); - - rt_device_t lcd; - - /* init lcd */ - rt_hw_lcd_init(); - - /* init touch panel */ - rtgui_touch_hw_init(); - - /* find lcd device */ - lcd = rt_device_find("lcd"); - - /* set lcd device as rtgui graphic driver */ - rtgui_graphic_set_device(lcd); - -#ifndef RT_USING_COMPONENTS_INIT - /* init rtgui system server */ - rtgui_system_server_init(); -#endif - - calibration_set_restore(cali_setup); - calibration_set_after(cali_store); - calibration_init(); - } -#endif /* #ifdef RT_USING_RTGUI */ -} - -//#include "debug.h" -// -//rt_thread_t test_thread[2]; -// -//void rt_test_thread_entry(void *parameter) -//{ -// uint32_t num = (uint32_t)parameter; -// uint32_t schedule_times = 0; -// -// while (1) -// { -// DEBUG(1, 0, "%d:%d\r\n", num, schedule_times++); -// rt_thread_delay(1); -// } -//} - -int rt_application_init(void) -{ - rt_thread_t init_thread; - -#if (RT_THREAD_PRIORITY_MAX == 32) - init_thread = rt_thread_create("init", - rt_init_thread_entry, RT_NULL, - 2048, 8, 20); -#else - init_thread = rt_thread_create("init", - rt_init_thread_entry, RT_NULL, - 2048, 80, 20); -#endif - - if (init_thread != RT_NULL) - rt_thread_startup(init_thread); - -// test_thread[0] = rt_thread_create("t1", rt_test_thread_entry, (void *)1, 1024, 26, 5); -// test_thread[1] = rt_thread_create("t2", rt_test_thread_entry, (void *)2, 1024, 26, 5); -// if (test_thread[0] != RT_NULL) -// rt_thread_startup(test_thread[0]); -// if (test_thread[1] != RT_NULL) -// rt_thread_startup(test_thread[1]); - - return 0; -} - -/*@}*/ diff --git a/bsp/AE210P/board.c b/bsp/AE210P/board.c deleted file mode 100644 index d086bd63b2..0000000000 --- a/bsp/AE210P/board.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * File : board.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009 RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-01-05 Bernard first implementation - * 2013-07-12 aozima update for auto initial. - */ - -#include -#include - -#include "nds32.h" -#include "bsp_hal.h" -#include "ae210p.h" -#include "debug.h" -//#include "uart/uart.h" -#include "uart_dev.h" - -#include "board.h" -#include "rtconfig.h" - -/** - * This is the timer interrupt service routine. - * - */ -void SysTick_Handler(void) -{ - /* clean timer device pending*/ - hal_timer_irq_clear(1); - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_tick_increase(); - - /* leave interrupt */ - rt_interrupt_leave(); -} - -/*********************************************************** - * Set timer 1 as system tick by default - ***********************************************************/ - -void BSP_Tmr_TickInit(uint32_t tmrId, uint32_t period, uint32_t vecId, void *isr) -{ - /* set tick period */ - hal_timer_set_period(tmrId, period); - - /* enable timer1 interrupt */ - hal_timer_irq_control(tmrId, 1); - - /****************************** - * tick ISR init - ******************************/ - /* init trigger mode */ - /* Set edge trigger, falling edge */ - hal_intc_irq_config(vecId, 1, 0); - /* clean pending */ - hal_intc_irq_clean(vecId); - /* enable timer interrupt */ - hal_intc_irq_enable(vecId); - - if (isr) - OS_CPU_Vector_Table[vecId] = isr; - else - DEBUG(1, 1, "Invalid tick handler!!\r\n"); - - /* start timer */ - hal_timer_start(tmrId); -} - -/* - * Setup system tick for OS required. - */ -void bsp_init(void) -{ - /* disable interrupt first */ - rt_hw_interrupt_disable(); - -// drv_uart_init(); - rt_hw_usart_init(); - rt_console_set_device(RT_CONSOLE_DEVICE_NAME); - - /* System tick init */ - BSP_Tmr_TickInit(0x1, (MB_PCLK / RT_TICK_PER_SECOND), IRQ_SYS_TICK_VECTOR, SysTick_Handler); -} - -/*@}*/ diff --git a/bsp/AE210P/board.h b/bsp/AE210P/board.h deleted file mode 100644 index 22dc3dc9f1..0000000000 --- a/bsp/AE210P/board.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * File : board.h - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-09-22 Bernard add board.h to this bsp - */ - -// <<< Use Configuration Wizard in Context Menu >>> -#ifndef __BOARD_H__ -#define __BOARD_H__ - -#include "nds32.h" - -/* board configuration */ - -//#define RT_USING_UART01 1 -#define RT_USING_UART02 1 - -void rt_hw_board_init(void); - -#endif /* __BOARD_H__ */ diff --git a/bsp/AE210P/board/ae210p.c b/bsp/AE210P/board/ae210p.c deleted file mode 100644 index ee0cfaca75..0000000000 --- a/bsp/AE210P/board/ae210p.c +++ /dev/null @@ -1,338 +0,0 @@ -#include -#include "debug.h" -#include "nds32.h" -#include "cache.h" - - -#define CACHE_NONE 0 -#define CACHE_WRITEBACK 2 -#define CACHE_WRITETHROUGH 3 - -#if (defined(CONFIG_CPU_ICACHE_ENABLE) || defined(CONFIG_CPU_DCACHE_ENABLE)) -/* Cacheable */ -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH -#define CACHE_MODE CACHE_WRITETHROUGH -#else -#define CACHE_MODE CACHE_WRITEBACK -#endif -#else -/* Uncacheable */ -#define CACHE_MODE CACHE_NONE -#endif - - -#define MMU_CTL_MSK \ - (MMU_CTL_mskD \ - | MMU_CTL_mskNTC0 \ - | MMU_CTL_mskNTC1 \ - | MMU_CTL_mskNTC2 \ - | MMU_CTL_mskNTC3 \ - | MMU_CTL_mskTBALCK \ - | MMU_CTL_mskMPZIU \ - | MMU_CTL_mskNTM0 \ - | MMU_CTL_mskNTM1 \ - | MMU_CTL_mskNTM2 \ - | MMU_CTL_mskNTM3) -/* - * NTC0: CACHE_MODE, NTC1~NTC3: Non-cacheable - * MSC_CFG.ADR24 = 0 : NTM0~NTM3 are mapped to partition 0/0/0/0 - * MSC_CFG.ADR24 = 1 : NTM0~NTM3 are mapped to partition 0/1/2/3 - */ -#define MMU_CTL_INIT \ - (0x0UL << MMU_CTL_offD \ - | (CACHE_MODE) << MMU_CTL_offNTC0 \ - | 0x0UL << MMU_CTL_offNTC1 \ - | 0x0UL << MMU_CTL_offNTC2 \ - | 0x0UL << MMU_CTL_offNTC3 \ - | 0x0UL << MMU_CTL_offTBALCK \ - | 0x0UL << MMU_CTL_offMPZIU \ - | 0x0UL << MMU_CTL_offNTM0 \ - | 0x0UL << MMU_CTL_offNTM1 \ - | 0x0UL << MMU_CTL_offNTM2 \ - | 0x0UL << MMU_CTL_offNTM3) - -#define MMU_CTL_INIT_ADR24 \ - (MMU_CTL_INIT \ - | 0x0UL << MMU_CTL_offNTM0 \ - | 0x1UL << MMU_CTL_offNTM1 \ - | 0x2UL << MMU_CTL_offNTM2 \ - | 0x3UL << MMU_CTL_offNTM3) - -#define CACHE_CTL_MSK \ - (CACHE_CTL_mskIC_EN \ - | CACHE_CTL_mskDC_EN \ - | CACHE_CTL_mskICALCK \ - | CACHE_CTL_mskDCALCK \ - | CACHE_CTL_mskDCCWF \ - | CACHE_CTL_mskDCPMW) -/* ICache/DCache enable */ -#define CACHE_CTL_CACHE_ON \ - (0x1UL << CACHE_CTL_offIC_EN \ - | 0x1UL << CACHE_CTL_offDC_EN \ - | 0x0UL << CACHE_CTL_offICALCK \ - | 0x0UL << CACHE_CTL_offDCALCK \ - | 0x1UL << CACHE_CTL_offDCCWF \ - | 0x1UL << CACHE_CTL_offDCPMW) - -/* - * Interrupt priority : - * PIT(IRQ #2): highest priority - * Others: lowest priority - */ -#define PRI1_DEFAULT 0xFFFFFFFF -#define PRI2_DEFAULT 0xFFFFFFFF - - -/* This must be a leaf function, no child function */ -void _nds32_init_mem(void) __attribute__((naked, optimize("Os"))); -void _nds32_init_mem(void) -{ - /* Enable DLM */ - __nds32__mtsr(EDLM_BASE | 0x1, NDS32_SR_DLMB); - __nds32__dsb(); -} - -/* - * Initialize MMU configure and cache ability. - */ -static void mmu_init(void) -{ -//#ifndef __NDS32_ISA_V3M__ -// unsigned int reg; -// -// /* MMU initialization: NTC0~NTC3, NTM0~NTM3 */ -// reg = (__nds32__mfsr(NDS32_SR_MMU_CTL) & ~MMU_CTL_MSK) | MMU_CTL_INIT; -// -// if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskADR24) -// reg = (__nds32__mfsr(NDS32_SR_MMU_CTL) & ~MMU_CTL_MSK) | MMU_CTL_INIT_ADR24; -// else -// reg = (__nds32__mfsr(NDS32_SR_MMU_CTL) & ~MMU_CTL_MSK) | MMU_CTL_INIT; -// -// __nds32__mtsr(reg, NDS32_SR_MMU_CTL); -// __nds32__dsb(); -//#endif -} - -/* - * Platform specific initialization - */ -static void plf_init(void) -{ - /* Set default Hardware interrupts priority */ - __nds32__mtsr(PRI1_DEFAULT, NDS32_SR_INT_PRI); - __nds32__mtsr(PRI2_DEFAULT, NDS32_SR_INT_PRI2); - - /* Mask all HW interrupts except SWI */ - __nds32__mtsr((1 << IRQ_SYS_TICK_VECTOR) | (1 << IRQ_SWI_VECTOR), NDS32_SR_INT_MASK2); - - /* Reset the PIT (timers) */ - REG32(PIT_INT_EN) = 0; /* disable all timer interrupt */ - REG32(PIT_CH_EN) = 0; /* disable all timer */ - REG32(PIT_INT_ST) = -1; /* clear pending events */ - REG32(PIT_CHNx_LOAD(0)) = 0; /* clean channel 0 reload */ - REG32(PIT_CHNx_LOAD(1)) = 0; /* clean channel 1 reload */ - REG32(PIT_CHNx_LOAD(2)) = 0; /* clean channel 2 reload */ - REG32(PIT_CHNx_LOAD(3)) = 0; /* clean channel 3 reload */ -} - -/* - * All AE210P hardware initialization - */ -void hardware_init(void) -{ - mmu_init(); /* mmu/cache */ - plf_init(); /* Perform any platform specific initializations */ - -#if (defined(CONFIG_CPU_ICACHE_ENABLE) || defined(CONFIG_CPU_DCACHE_ENABLE)) - unsigned int reg; - - /* Invalid ICache */ - nds32_icache_flush(); - - /* Invalid DCache */ - nds32_dcache_invalidate(); - - /* Enable I/Dcache */ - reg = (__nds32__mfsr(NDS32_SR_CACHE_CTL) & ~CACHE_CTL_MSK) | CACHE_CTL_CACHE_ON; - __nds32__mtsr(reg, NDS32_SR_CACHE_CTL); -#endif -} - - -/******************************** - * HAL Level : Interrupt - ********************************/ -/* 32IVIC without SOC INTC */ - -/* - * mask/unmask priority >= _irqs_ interrupts - * used in ISR & gie diable - */ -uint32_t hal_intc_irq_mask(int _irqs_) -{ - uint32_t prv_msk = __nds32__mfsr(NDS32_SR_INT_MASK2); - if (_irqs_ == -1 ) - { - __nds32__mtsr(0, NDS32_SR_INT_MASK2); - } - else if (_irqs_ < 32 ) - { - SR_CLRB32(NDS32_SR_INT_MASK2,_irqs_); - } - else - { - DEBUG(1,1,"_irqs_:%d, is invalid!\r\n",_irqs_); - return -1; - } - - return prv_msk; -} - -void hal_intc_irq_unmask(uint32_t _msk_) -{ - __nds32__mtsr( _msk_ , NDS32_SR_INT_MASK2); -} - -void hal_intc_irq_clean(int _irqs_) -{ - if ( _irqs_ == IRQ_SWI_VECTOR ) - { - SR_CLRB32(NDS32_SR_INT_PEND, INT_PEND_offSWI); - } - else - { - /* PEND2 is W1C */ - SR_SETB32(NDS32_SR_INT_PEND2,_irqs_); - } -} - -void hal_intc_irq_clean_all() -{ - __nds32__mtsr(-1,NDS32_SR_INT_PEND2); -} - -void hal_intc_irq_disable(int _irqs_) -{ - SR_CLRB32(NDS32_SR_INT_MASK2,_irqs_); -} - -void hal_intc_irq_disable_all() -{ - __nds32__mtsr(0x0,NDS32_SR_INT_MASK2); -} - -void hal_intc_irq_enable(int _irqs_) -{ - SR_SETB32(NDS32_SR_INT_MASK2,_irqs_); -} - -void hal_intc_irq_set_priority( uint32_t _prio1_, uint32_t _prio2_ ) -{ - __nds32__mtsr(_prio1_, NDS32_SR_INT_PRI); - __nds32__mtsr(_prio2_, NDS32_SR_INT_PRI2); -} - -void hal_intc_irq_config(uint8_t _irq_, uint8_t _edge_, uint8_t _falling_){} - -void hal_intc_swi_enable() -{ - //SR_SETB32(NDS32_SR_INT_MASK,16); - SR_SETB32(NDS32_SR_INT_MASK2,IRQ_SWI_VECTOR); -} - -void hal_intc_swi_disable() -{ - SR_CLRB32(NDS32_SR_INT_MASK2,IRQ_SWI_VECTOR); -} - -void hal_intc_swi_clean() -{ - SR_CLRB32(NDS32_SR_INT_PEND, INT_PEND_offSWI); -} - -void hal_intc_swi_trigger() -{ - SR_SETB32(NDS32_SR_INT_PEND,INT_PEND_offSWI); -} - -uint32_t hal_intc_get_all_pend() -{ - return __nds32__mfsr(NDS32_SR_INT_PEND2); -} - -/******************************** - * TIMER HAL Function - ********************************/ -static const uint8_t timer_irq[4] = {IRQ_PIT_VECTOR, IRQ_PIT_VECTOR, IRQ_PIT_VECTOR, IRQ_PIT_VECTOR}; - - -uint32_t hal_timer_irq_mask(uint32_t _tmr_ ) -{ - return hal_intc_irq_mask(timer_irq[_tmr_-1]); -} -void hal_timer_irq_unmask(uint32_t _msk_ ) -{ - hal_intc_irq_unmask(_msk_); -} - -void hal_timer_irq_clear(uint32_t _tmr_ ) -{ - /* Clean IP pending, W1C */ -#ifndef CONFIG_TX_DEMO - REG32(PIT_INT_ST) = (0x1 << (5*(_tmr_-1))); -#endif - - hal_intc_irq_clean(timer_irq[_tmr_-1]); -} - -void hal_timer_set_period(uint32_t _tmr_, uint32_t _period_ ) -{ - REG32(PIT_CHNx_LOAD(_tmr_-1)) = _period_; - //REG32(PIT_CHNx_COUNT(_tmr_-1))= _period_; -} - -void hal_timer_irq_control(uint32_t _tmr_, uint32_t enable ) -{ - if (enable) - REG32(PIT_INT_EN) = REG32(PIT_INT_EN) | (0x1 << (5*(_tmr_-1))); - else - REG32(PIT_INT_EN) = REG32(PIT_INT_EN) & ~(0x1 << (5*(_tmr_-1))); -} - -void hal_timer_set_upward(uint32_t _tmr_ ,uint32_t up) -{ - if ( up ) - DEBUG(1,1,"PIT Timer only support downward!\r\n"); -} -void hal_timer_start(uint32_t _tmr_) -{ - /* config channel mode */ - /* 32 bits timer, APB clock */ - REG32(PIT_CHNx_CTL(_tmr_-1)) = ( PIT_CH_CTL_APBCLK | PIT_CH_CTL_TMR32 ); - /* enable channel */ - REG32(PIT_CH_EN) = REG32(PIT_CH_EN) | (0x1 << (5*(_tmr_-1))); -} - -void hal_timer_stop(uint32_t _tmr_ ) -{ - REG32(PIT_CH_EN) = REG32(PIT_CH_EN) & ~(0x1 << (5*(_tmr_-1))); -} - -uint32_t hal_timer_read(uint32_t _tmr_ ) -{ - /* By default, timer would decrease from load value to 0 */ - return REG32( PIT_CHNx_LOAD(_tmr_-1) ) - REG32( PIT_CHNx_COUNT(_tmr_-1) ); -} - -uint32_t hal_timer_count_read(uint32_t _tmr_ ) -{ - return REG32( PIT_CHNx_COUNT(_tmr_-1) ); -} - -uint32_t hal_timer_irq_status(uint32_t _tmr_) -{ - /* return PIT int status */ - /* PIT need #channel & #timer */ - /* just return all int status */ - return REG32(PIT_INT_ST); -} diff --git a/bsp/AE210P/board/ae210p.h b/bsp/AE210P/board/ae210p.h deleted file mode 100644 index 7fc6e6c126..0000000000 --- a/bsp/AE210P/board/ae210p.h +++ /dev/null @@ -1,74 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2014 - * All Rights Reserved. - * - ****************************************************************************/ - -#ifndef __AE210P_H__ -#define __AE210P_H__ - -#ifndef __ASSEMBLER__ -#include -#include -#endif - -/***************************************************************************** - * System clock - ****************************************************************************/ -#define KHz 1000 -#define MHz 1000000 - -#define MB_OSCCLK (20 * MHz) -#define MB_CPUCLK (40 * MHz) -#define MB_HCLK (MB_CPUCLK) -#define MB_PCLK (MB_CPUCLK) -#define MB_UCLK (MB_OSCCLK) - -/***************************************************************************** - * IRQ Vector - ****************************************************************************/ -#define IRQ_RTCPERIOD_VECTOR 0 -#define IRQ_RTCALARM_VECTOR 1 -#define IRQ_PIT_VECTOR 2 -#define IRQ_SPI1_VECTOR 3 -#define IRQ_SPI2_VECTOR 4 -#define IRQ_I2C_VECTOR 5 -#define IRQ_GPIO_VECTOR 6 -#define IRQ_UART1_VECTOR 7 -#define IRQ_UATR2_VECTOR 8 -#define IRQ_DMA_VECTOR 9 -#define IRQ_BMC_VECTOR 10 -#define IRQ_SWI_VECTOR 11 - -/* EXT_INT_0~19 are reserved for vendor IPs */ -#define IRQ_EXTINT0_VECTOR 12 -#define IRQ_EXTINT1_VECTOR 13 -#define IRQ_EXTINT2_VECTOR 14 -#define IRQ_EXTINT3_VECTOR 15 -#define IRQ_EXTINT4_VECTOR 16 -#define IRQ_EXTINT5_VECTOR 17 -#define IRQ_EXTINT6_VECTOR 18 -#define IRQ_EXTINT7_VECTOR 19 -#define IRQ_EXTINT8_VECTOR 20 -#define IRQ_EXTINT9_VECTOR 21 -#define IRQ_EXTINT10_VECTOR 22 -#define IRQ_EXTINT11_VECTOR 23 -#define IRQ_EXTINT12_VECTOR 24 -#define IRQ_EXTINT13_VECTOR 25 -#define IRQ_EXTINT14_VECTOR 26 -#define IRQ_EXTINT15_VECTOR 27 -#define IRQ_EXTINT16_VECTOR 28 -#define IRQ_EXTINT17_VECTOR 29 -#define IRQ_EXTINT18_VECTOR 30 -#define IRQ_EXTINT19_VECTOR 31 - -/* The system tick IRQ for OS */ -#define IRQ_SYS_TICK_VECTOR IRQ_PIT_VECTOR -#define IRQ_SYS_TICK2_VECTOR IRQ_PIT_VECTOR - -/* Include ae210p memory mapping and register definition */ -#include "ae210p_defs.h" -#include "ae210p_regs.h" - -#endif /* __AE210P_H__ */ diff --git a/bsp/AE210P/board/ae210p.ld b/bsp/AE210P/board/ae210p.ld deleted file mode 100644 index fd79ebb12f..0000000000 --- a/bsp/AE210P/board/ae210p.ld +++ /dev/null @@ -1,202 +0,0 @@ -/* This file is generated by nds_ldsag (version (2017-01-11) ). */ -ENTRY(_start) -SECTIONS -{ - PROVIDE (__executable_start = 0x0); - NDS_SAG_LMA_FLASH1 = 0x0 ; - . = 0x0; - ROM_BEGIN = .; - .nds32_init : { KEEP(*(.nds32_init )) } - .interp : { *(.interp ) } - .hash : { *(.hash ) } - .dynsym : { *(.dynsym ) } - .dynstr : { *(.dynstr ) } - .gnu.version : { *(.gnu.version ) } - .gnu.version_d : { *(.gnu.version_d ) } - .gnu.version_r : { *(.gnu.version_r ) } - .rel.init : { *(.rel.init ) } - .rela.init : { *(.rela.init ) } - .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.* ) } - .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.* ) } - .rel.fini : { *(.rel.fini ) } - .rela.fini : { *(.rela.fini ) } - .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.* ) } - .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.* ) } - .rel.data.rel.ro : { *(.rel.data.rel.ro* ) } - .rela.data.rel.ro : { *(.rel.data.rel.ro* ) } - .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.* ) } - .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.* ) } - .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.* ) } - .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.* ) } - .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.* ) } - .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.* ) } - .rel.ctors : { *(.rel.ctors ) } - .rela.ctors : { *(.rela.ctors ) } - .rel.dtors : { *(.rel.dtors ) } - .rela.dtors : { *(.rela.dtors ) } - .rela.dyn : { *(rela.dyn ) *(.rela__libc_subfreeres ) *(.rela__libc_atexit ) *(.rela__libc_thread_subfreeres ) *(.rela.init_array ) *(.rela.fini_array ) } - .rel.got : { *(.rel.got ) } - .rela.got : { *(.rela.got ) } - .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.* ) } - .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.* ) } - .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.* ) } - .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.* ) } - .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.* ) } - .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.* ) } - .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.* ) } - .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.* ) } - .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.* ) } - .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.* ) } - .rel.plt : { *(.rel.plt ) } - .rela.plt : { *(.rela.plt ) } - .init : { KEEP(*(.init )) } - .plt : { *(.plt ) } - .text : { *(.text .stub .text.* .gnu.linkonce.t.* ) KEEP(*(.text.*personality* )) *(.gnu.warning ) . = ALIGN(4); } - .fini : { KEEP(*(.fini )) } - .ex9.itable : { *(.ex9.itable ) } - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.* ) } - .rodata1 : { *(.rodata1 ) } - .sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.* ) } - .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.* ) } - .eh_frame_hdr : { *(.eh_frame_hdr ) } - . = ALIGN(4); - __fsymtab_start = .; - FSymTab : { KEEP(*(FSymTab )) } - . = ALIGN(4); - __fsymtab_end = .; - . = ALIGN(4); - __vsymtab_start = .; - VSymTab : { KEEP(*(VSymTab )) } - . = ALIGN(4); - __vsymtab_end = .; - . = ALIGN(4); - __rt_init_start = .; - .rti_fn.0 : { KEEP(*(.rti_fn.0 )) } - .rti_fn.0.end : { KEEP(*(.rti_fn.0.end )) } - .rti_fn.1 : { KEEP(*(.rti_fn.1 )) } - .rti_fn.1.end : { KEEP(*(.rti_fn.1.end )) } - .rti_fn.2 : { KEEP(*(.rti_fn.2 )) } - .rti_fn.2.end : { KEEP(*(.rti_fn.2.end )) } - .rti_fn.3 : { KEEP(*(.rti_fn.3 )) } - .rti_fn.3.end : { KEEP(*(.rti_fn.3.end )) } - .rti_fn.4 : { KEEP(*(.rti_fn.4 )) } - .rti_fn.4.end : { KEEP(*(.rti_fn.4.end )) } - .rti_fn.5 : { KEEP(*(.rti_fn.5 )) } - .rti_fn.5.end : { KEEP(*(.rti_fn.5.end )) } - .rti_fn.6 : { KEEP(*(.rti_fn.6 )) } - .rti_fn.6.end : { KEEP(*(.rti_fn.6.end )) } - .rti_fn.7 : { KEEP(*(.rti_fn.7 )) } - .rti_fn.7.end : { KEEP(*(.rti_fn.7.end )) } - . = ALIGN(4); - __rt_init_end = .; - ROM_SIZE = . - ROM_BEGIN; - . = 0x200000; - RAM_BEGIN = .; - . = ALIGN(0x20); - __rw_lma_start = LOADADDR (.eh_frame); - __rw_vma_start = ADDR(.eh_frame); - .eh_frame : AT(ALIGN(LOADADDR (.rti_fn.7.end) + SIZEOF (.rti_fn.7.end), 32)) - { KEEP(*(.eh_frame )) } - .gcc_except_table : AT(ALIGN(LOADADDR (.eh_frame) + SIZEOF (.eh_frame), ALIGNOF(.gcc_except_table))) - { KEEP(*(.gcc_except_table )) *(.gcc_except_table.* ) } - .tdata : AT(ALIGN(LOADADDR (.gcc_except_table) + SIZEOF (.gcc_except_table), ALIGNOF(.tdata))) - { *(.tdata .tdata.* .gnu.linkonce.td.* ) } - . = ALIGN(4); - PROVIDE (__preinit_array_start = .); - .preinit_array : AT(ALIGN(ALIGN(LOADADDR (.tdata) + SIZEOF (.tdata), ALIGNOF(.preinit_array)), 4)) - { KEEP(*(.preinit_array )) } - PROVIDE (__preinit_array_end = .); - PROVIDE (__init_array_start = .); - .init_array : AT(ALIGN(LOADADDR (.preinit_array) + SIZEOF (.preinit_array), ALIGNOF(.init_array))) - { KEEP(*(.init_array )) } - PROVIDE (__init_array_end = .); - PROVIDE (__fini_array_start = .); - .fini_array : AT(ALIGN(LOADADDR (.init_array) + SIZEOF (.init_array), ALIGNOF(.fini_array))) - { KEEP(*(.fini_array )) } - PROVIDE (__fini_array_end = .); - .ctors : AT(ALIGN(LOADADDR (.fini_array) + SIZEOF (.fini_array), ALIGNOF(.ctors))) - { KEEP(*crtbegin*.o(.ctors)) KEEP(*(EXCLUDE_FILE (*crtend*.o) .ctors)) KEEP(*(SORT(.ctors.* ))) KEEP(*(.ctors )) } - .dtors : AT(ALIGN(LOADADDR (.ctors) + SIZEOF (.ctors), ALIGNOF(.dtors))) - { KEEP(*crtbegin*.o(.dtors)) KEEP(*(EXCLUDE_FILE (*crtend*.o) .dtors)) KEEP(*(SORT(.dtors.* ))) KEEP(*(.dtors )) } - .jcr : AT(ALIGN(LOADADDR (.dtors) + SIZEOF (.dtors), ALIGNOF(.jcr))) - { KEEP(*(.jcr )) } - .data.rel.ro : AT(ALIGN(LOADADDR (.jcr) + SIZEOF (.jcr), ALIGNOF(.data.rel.ro))) - { *(.data.rel.ro.local ) *(.data.rel.ro* ) } - .dynamic : AT(ALIGN(LOADADDR (.data.rel.ro) + SIZEOF (.data.rel.ro), ALIGNOF(.dynamic))) - { *(.dynamic ) } - .data : AT(ALIGN(LOADADDR (.dynamic) + SIZEOF (.dynamic), ALIGNOF(.data))) - { *(.data .data.* .gnu.linkonce.d.* ) KEEP(*(.gnu.linkonce.d.*personality* )) SORT(CONSTRUCTORS) . = ALIGN(8); } - .data1 : AT(ALIGN(LOADADDR (.data) + SIZEOF (.data), ALIGNOF(.data1))) - { *(.data1 ) . = ALIGN(8); } - . = ALIGN(4); - .got : AT(ALIGN(ALIGN(LOADADDR (.data1) + SIZEOF (.data1), ALIGNOF(.got)), 4)) - { *(.got.plt ) *(.got ) } - .sdata_d : AT(ALIGN(LOADADDR (.got) + SIZEOF (.got), ALIGNOF(.sdata_d))) - { *(.sdata_d .sdata_d.* ) } - .sdata_w : AT(ALIGN(LOADADDR (.sdata_d) + SIZEOF (.sdata_d), ALIGNOF(.sdata_w))) - { *(.sdata_w .sdata_w.* ) } - .sdata_h : AT(ALIGN(LOADADDR (.sdata_w) + SIZEOF (.sdata_w), ALIGNOF(.sdata_h))) - { *(.sdata_h .sdata_h.* ) } - .sdata_b : AT(ALIGN(LOADADDR (.sdata_h) + SIZEOF (.sdata_h), ALIGNOF(.sdata_b))) - { *(.sdata_b .sdata_b.* ) } - .sdata_f : AT(ALIGN(LOADADDR (.sdata_b) + SIZEOF (.sdata_b), ALIGNOF(.sdata_f))) - { *(.sdata_f .sdata_f.* ) } - . = ALIGN(4); - _edata = .; - PROVIDE (edata = .); - __bss_start = .; - PROVIDE (__sbss_start = .); - PROVIDE (___sbss_start = .); - __rw_lma_end = LOADADDR (.tbss); - .tbss : AT(ALIGN(ALIGN(LOADADDR (.sdata_f) + SIZEOF (.sdata_f), ALIGNOF(.tbss)), 4)) - { *(.tbss .tbss.* .gnu.linkonce.tb.* ) *(.tcommon ) } - .sbss_f : AT(ALIGN(LOADADDR (.tbss) + SIZEOF (.tbss), ALIGNOF(.sbss_f))) - { *(.sbss_f .sbss_f.* ) *(.scommon_f .scommon_f.* ) } - .sbss_b : AT(ALIGN(LOADADDR (.sbss_f) + SIZEOF (.sbss_f), ALIGNOF(.sbss_b))) - { *(.sbss_b .sbss_b.* ) *(.scommon_b .scommon_b.* ) . = ALIGN(2); } - .sbss_h : AT(ALIGN(LOADADDR (.sbss_b) + SIZEOF (.sbss_b), ALIGNOF(.sbss_h))) - { *(.sbss_h .sbss_h.* ) *(.scommon_h .scommon_h.* ) . = ALIGN(4); } - .sbss_w : AT(ALIGN(LOADADDR (.sbss_h) + SIZEOF (.sbss_h), ALIGNOF(.sbss_w))) - { *(.sbss_w .sbss_w.* ) *(.scommon_w .scommon_w.* ) *(.dynsbss ) *(.scommon ) . = ALIGN(8); } - .sbss_d : AT(ALIGN(LOADADDR (.sbss_w) + SIZEOF (.sbss_w), ALIGNOF(.sbss_d))) - { *(.sbss_d .sbss_d.* ) *(.scommon_d .scommon_d.* ) } - .bss : AT(ALIGN(LOADADDR (.sbss_d) + SIZEOF (.sbss_d), ALIGNOF(.bss))) - { *(.dynbss ) *(.bss .bss.* .gnu.linkonce.b.* ) *(COMMON ) . = ALIGN(4); } - PROVIDE (__sbss_end = .); - PROVIDE (___sbss_end = .); - . = ALIGN(4); - _end = .; - PROVIDE (end = .); - PROVIDE (_stack = 0x24fff8); - RAM_SIZE = . - RAM_BEGIN; - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .note.nds32 0 : { *(.note.nds32) *(.note.nds32.*) } - .comment 0 : { *(.comment) } - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} -ASSERT((DEFINED (_RELAX_END_) ? ROM_SIZE : 0x0)<= 0x80000, "ROM OVERFLOW"); -ASSERT((DEFINED (_RELAX_END_) ? RAM_SIZE : 0x0)<= 0x50000, "RAM OVERFLOW"); diff --git a/bsp/AE210P/board/ae210p.sag b/bsp/AE210P/board/ae210p.sag deleted file mode 100644 index 2c83487bf6..0000000000 --- a/bsp/AE210P/board/ae210p.sag +++ /dev/null @@ -1,68 +0,0 @@ -USER_SECTIONS FSymTab -USER_SECTIONS VSymTab -USER_SECTIONS .rti_fn.0 -USER_SECTIONS .rti_fn.0.end -USER_SECTIONS .rti_fn.1 -USER_SECTIONS .rti_fn.1.end -USER_SECTIONS .rti_fn.2 -USER_SECTIONS .rti_fn.2.end -USER_SECTIONS .rti_fn.3 -USER_SECTIONS .rti_fn.3.end -USER_SECTIONS .rti_fn.4 -USER_SECTIONS .rti_fn.4.end -USER_SECTIONS .rti_fn.5 -USER_SECTIONS .rti_fn.5.end -USER_SECTIONS .rti_fn.6 -USER_SECTIONS .rti_fn.6.end -USER_SECTIONS .rti_fn.7 -USER_SECTIONS .rti_fn.7.end -FLASH1 0x0 -{ - ROM 0x0 0x80000 ; EILM_SIZE <= 512KB - { - * (+RO) - - . = ALIGN(4); - ADDR __fsymtab_start - * KEEP( FSymTab ) - . = ALIGN(4); - ADDR __fsymtab_end - . = ALIGN(4); - ADDR __vsymtab_start - * KEEP( VSymTab ) - . = ALIGN(4); - ADDR __vsymtab_end - . = ALIGN(4); - ADDR __rt_init_start - * KEEP( .rti_fn.0 ) - * KEEP( .rti_fn.0.end ) - * KEEP( .rti_fn.1 ) - * KEEP( .rti_fn.1.end ) - * KEEP( .rti_fn.2 ) - * KEEP( .rti_fn.2.end ) - * KEEP( .rti_fn.3 ) - * KEEP( .rti_fn.3.end ) - * KEEP( .rti_fn.4 ) - * KEEP( .rti_fn.4.end ) - * KEEP( .rti_fn.5 ) - * KEEP( .rti_fn.5.end ) - * KEEP( .rti_fn.6 ) - * KEEP( .rti_fn.6.end ) - * KEEP( .rti_fn.7 ) - * KEEP( .rti_fn.7.end ) - . = ALIGN(4); - ADDR __rt_init_end - } - -; RAM 0x200000 0x80000 ; EDLM_SIZE <= 512KB - RAM 0x200000 0x50000 ; EDLM_SIZE <= 320KB - { - LOADADDR NEXT __rw_lma_start - ADDR NEXT __rw_vma_start - *(+RW) - LOADADDR NEXT __rw_lma_end - *(+ZI) -; STACK = 0x27fff8 ; 512KB - STACK = 0x24fff8 ; 320KB - } -} \ No newline at end of file diff --git a/bsp/AE210P/board/ae210p_defs.h b/bsp/AE210P/board/ae210p_defs.h deleted file mode 100644 index cbfc157c6a..0000000000 --- a/bsp/AE210P/board/ae210p_defs.h +++ /dev/null @@ -1,306 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2014 - * All Rights Reserved. - * - * Revision History: - * - * Jan.11.2014 Created. - ****************************************************************************/ - -#ifndef __AE210_DEFS_H__ -#define __AE210_DEFS_H__ - -/***************************************************************************** - * AHB_SLAVE_4_7 - AE210P AHB - ****************************************************************************/ - - -/***************************************************************************** - * BMC (APB Decoder)- AE210P AHB - ****************************************************************************/ - -/***************************************************************************** - * OSC - AE210P OSC - ****************************************************************************/ -/* OSC control Register (+0x00) */ -#define OSC_CTRL_OVL_SZ_SHIFT 24 -#define OSC_CTRL_OVLVALID_SHIFT 31 - -#define OSC_CTRL_OVL_SZ_MASK 0x07000000 -#define OSC_CTRL_OVLVALID_MASK 0x80000000 - -/* OSC Fixed Region Size Register (+0x04) */ -#define OSC_OVLFS_OVL_FSZ_MASK 0x000FFFFF - -/* OSC Overlay Region Base Register (+0x08) */ -#define OSC_OVLBASE_OVL_BASE_MASK 0x000FFFFF - -/* OSC Overlay Region End Register (+0x0C) */ -#define OSC_OVLEND_OVL_END_MASK 0x001FFFFF - -/***************************************************************************** - * DMAC - AE210P AHB - ****************************************************************************/ - -/***************************************************************************** - * AHB_SLAVE_0_3 - AE210P AHB - ****************************************************************************/ - -//TODO -//finish this table -/***************************************************************************** - * APBBR(N/A) - AE210P AHB to APB Bridge - ****************************************************************************/ - -/***************************************************************************** - * SMU - AE210P Core APB - ****************************************************************************/ - -/***************************************************************************** - * UARTx - AE210P Core APB - ****************************************************************************/ -/* Macros for specifying which UART to use. */ -#define UARTC_NUM_DEVICES 2 - -/* IER Register (+0x04) */ -#define UARTC_IER_RDR 0x01 /* Data Ready Enable */ -#define UARTC_IER_THRE 0x02 /* THR Empty Enable */ -#define UARTC_IER_RLS 0x04 /* Receive Line Status Enable */ -#define UARTC_CIER_MS 0x08 /* Modem Staus Enable */ - -/* IIR Register (+0x08) */ -#define UARTC_IIR_NONE 0x01 /* No interrupt pending */ -#define UARTC_IIR_RLS 0x06 /* Receive Line Status */ -#define UARTC_IIR_RDR 0x04 /* Receive Data Ready */ -#define UARTC_IIR_RTO 0x0c /* Receive Time Out */ -#define UARTC_IIR_THRE 0x02 /* THR Empty */ -#define UARTC_IIR_MODEM 0x00 /* Modem Status */ -#define UARTC_IIR_INT_MASK 0x0f /* Initerrupt Status Bits Mask */ - -#define UARTC_IIR_TFIFO_FULL 0x10 /* TX FIFO full */ -#define UARTC_IIR_FIFO_EN 0xc0 /* FIFO mode is enabled, set when FCR[0] is 1 */ - -/* FCR Register (+0x08) */ -#define UARTC_FCR_FIFO_EN 0x01 /* FIFO Enable */ -#define UARTC_FCR_RFIFO_RESET 0x02 /* Rx FIFO Reset */ -#define UARTC_FCR_TFIFO_RESET 0x04 /* Tx FIFO Reset */ -#define UARTC_FCR_DMA_EN 0x08 /* Select UART DMA mode */ - -#define UARTC_FCR_TFIFO16_TRGL1 0x00 /* TX 16-byte FIFO int trigger level - 1 char */ -#define UARTC_FCR_TFIFO16_TRGL3 0x10 /* TX 16-byte FIFO int trigger level - 3 char */ -#define UARTC_FCR_TFIFO16_TRGL9 0x20 /* TX 16-byte FIFO int trigger level - 9 char */ -#define UARTC_FCR_TFIFO16_TRGL13 0x30 /* TX 16-byte FIFO int trigger level - 13 char */ - -#define UARTC_FCR_RFIFO16_TRGL1 0x00 /* RX 16-byte FIFO int trigger level - 1 char */ -#define UARTC_FCR_RFIFO16_TRGL4 0x40 /* RX 16-byte FIFO int trigger level - 4 char */ -#define UARTC_FCR_RFIFO16_TRGL8 0x80 /* RX 16-byte FIFO int trigger level - 8 char */ -#define UARTC_FCR_RFIFO16_TRGL14 0xc0 /* RX 16-byte FIFO int trigger level - 14 char */ - -/* FCR Register (+0x08) */ -#define UARTC_FCR_FIFO_EN_MASK 0x01 /* FIFO Enable */ -#define UARTC_FCR_FIFO_EN_BIT 0 -#define UARTC_FCR_RFIFO_RESET_MASK 0x02 /* Rx FIFO Reset */ -#define UARTC_FCR_RFIFO_RESET_BIT 1 -#define UARTC_FCR_TFIFO_RESET_MASK 0x04 /* Tx FIFO Reset */ -#define UARTC_FCR_TFIFO_RESET_BIT 2 -#define UARTC_FCR_DMA_EN_MASK 0x08 /* Select UART DMA mode */ -#define UARTC_FCR_DMA_EN_BIT 3 - -#define UARTC_FCR_TXFIFO_TRGL_MASK 0x30 /* TX FIFO int trigger level */ -#define UARTC_FCR_TXFIFO_TRGL_SHIFT 4 -#define UARTC_FCR_RXFIFO_TRGL_MASK 0xc0 /* RX FIFO int trigger level */ -#define UARTC_FCR_RXFIFO_TRGL_SHIFT 6 - -/* LCR Register (+0x0c) */ -#define UARTC_LCR_BITS5 0x00 -#define UARTC_LCR_BITS6 0x01 -#define UARTC_LCR_BITS7 0x02 -#define UARTC_LCR_BITS8 0x03 -#define UARTC_LCR_STOP1 0x00 -#define UARTC_LCR_STOP2 0x04 - -#define UARTC_LCR_PARITY_EN 0x08 /* Parity Enable */ -#define UARTC_LCR_PARITY_NONE 0x00 /* No Parity Check */ -#define UARTC_LCR_PARITY_EVEN 0x18 /* Even Parity */ -#define UARTC_LCR_PARITY_ODD 0x08 /* Odd Parity */ -#if 0 -#define UARTC_LCR_PARITY_1 0x21 /* 1 Parity Bit */ -#define UARTC_LCR_PARITY_0 0x31 /* 0 Parity Bit */ -#endif -#define UARTC_LCR_SETBREAK 0x40 /* Set Break condition */ -#define UARTC_LCR_DLAB 0x80 /* Divisor Latch Access Bit */ - -/* MCR Register (+0x10) */ -#define UARTC_MCR_DTR 0x01 /* Data Terminal Ready */ -#define UARTC_MCR_RTS 0x02 /* Request to Send */ -#define UARTC_MCR_OUT1 0x04 /* output1 */ -#define UARTC_MCR_OUT2 0x08 /* output2 or global interrupt enable */ -#define UARTC_MCR_LPBK 0x10 /* loopback mode */ -#define UARTC_MCR_DMAMODE2 0x20 /* DMA mode2 */ -#define UARTC_MCR_OUT3 0x40 /* output 3 */ - -/* LSR Register (+0x14) */ -#define UARTC_LSR_RDR 0x1 /* Data Ready */ -#define UARTC_LSR_OE 0x2 /* Overrun Error */ -#define UARTC_LSR_PE 0x4 /* Parity Error */ -#define UARTC_LSR_FE 0x8 /* Framing Error */ -#define UARTC_LSR_BI 0x10 /* Break Interrupt */ -#define UARTC_LSR_THRE 0x20 /* THR/FIFO Empty */ -#define UARTC_LSR_TE 0x40 /* THR/FIFO and TFR Empty */ -#define UARTC_LSR_DE 0x80 /* FIFO Data Error */ - -/* MSR Register (+0x18) */ -#define UARTC_MSR_DELTACTS 0x1 /* Delta CTS */ -#define UARTC_MSR_DELTADSR 0x2 /* Delta DSR */ -#define UARTC_MSR_TERI 0x4 /* Trailing Edge RI */ -#define UARTC_MSR_DELTACD 0x8 /* Delta CD */ -#define UARTC_MSR_CTS 0x10 /* Clear To Send */ -#define UARTC_MSR_DSR 0x20 /* Data Set Ready */ -#define UARTC_MSR_RI 0x40 /* Ring Indicator */ -#define UARTC_MSR_DCD 0x80 /* Data Carrier Detect */ - -/* MDR register (+0x20) */ -#define UARTC_MDR_MODE_SEL_SHIFT 0 -#define UARTC_MDR_SIP_BYCPU_BIT 2 -#define UARTC_MDR_FMEND_MD_BIT 3 -#define UARTC_MDR_DMA_EN_BIT 4 -#define UARTC_MDR_FIR_INV_RX_BIT 5 -#define UARTC_MDR_IR_INV_TX_BIT 6 -#define UARTC_MDR_MODE_SEL_MASK 0x03 -#define UARTC_MDR_SIP_BYCPU_MASK 0x04 /* 0: 1.6us end pulse; 1: depends on ACR[4] */ -#define UARTC_MDR_FMEND_MD_MASK 0x08 /* 0: Frame length counter method; 1: Set end of transmission bit method */ -#define UARTC_MDR_DMA_EN_MASK 0x10 /* Enable DMA mode. (PIO int should turn off) */ -#define UARTC_MDR_FIR_INV_RX_MASK 0x20 /* (FIR only) Invert receiver input signal */ -#define UARTC_MDR_IR_INV_TX_MASK 0x40 /* (FIR/SIR) Invert pulse during transmission */ - -#define UARTC_MDR_MODE_UART 0 -#define UARTC_MDR_MODE_SIR 1 -#define UARTC_MDR_MODE_FIR 2 - -/* ACR register (+0x24) */ -#define UARTC_ACR_IR_TX_EN 0x01 -#define UARTC_ACR_IR_RX_EN 0x02 -#define UARTC_ACR_FIR_SETEOT 0x04 - -/***************************************************************************** - * PIT - AG101 Core APB - ****************************************************************************/ - -/* Interrupt Enable Register */ -#define PIT_CH_NUM_MASK 0x7 - -/* Channel & Interrupt Enable Reg */ -#define PIT_C0_TMR0_EN 0x1 -#define PIT_C0_TMR1_EN 0x2 -#define PIT_C0_TMR2_EN 0x4 -#define PIT_C0_TMR3_EN 0x8 - -#define PIT_C1_TMR0_EN 0x10 -#define PIT_C1_TMR1_EN 0x20 -#define PIT_C1_TMR2_EN 0x40 -#define PIT_C1_TMR3_EN 0x80 - -#define PIT_C2_TMR0_EN 0x100 -#define PIT_C2_TMR1_EN 0x200 -#define PIT_C2_TMR2_EN 0x400 -#define PIT_C2_TMR3_EN 0x800 - -#define PIT_C3_TMR0_EN 0x1000 -#define PIT_C3_TMR1_EN 0x2000 -#define PIT_C3_TMR2_EN 0x4000 -#define PIT_C3_TMR3_EN 0x8000 - -/* Interrupt Status Register */ -/* Clean Timer interrupt pending bit, write 1 clean */ -#define PIT_C0_TMR0_PEND_W1C 0x1 -#define PIT_C0_TMR1_PEND_W1C 0x2 -#define PIT_C0_TMR2_PEND_W1C 0x4 -#define PIT_C0_TMR3_PEND_W1C 0x8 - -#define PIT_C1_TMR0_PEND_W1C 0x10 -#define PIT_C1_TMR1_PEND_W1C 0x20 -#define PIT_C1_TMR2_PEND_W1C 0x40 -#define PIT_C1_TMR3_PEND_W1C 0x80 - -#define PIT_C2_TMR0_PEND_W1C 0x100 -#define PIT_C2_TMR1_PEND_W1C 0x200 -#define PIT_C2_TMR2_PEND_W1C 0x400 -#define PIT_C2_TMR3_PEND_W1C 0x800 - -#define PIT_C3_TMR0_PEND_W1C 0x1000 -#define PIT_C3_TMR1_PEND_W1C 0x2000 -#define PIT_C3_TMR2_PEND_W1C 0x4000 -#define PIT_C3_TMR3_PEND_W1C 0x8000 - -/* channel 0~3 control register */ -/* ChClk*/ -#define PIT_CH_CTL_APBCLK 0x8 -/* ChMode*/ -#define PIT_CH_CTL_TMR32 0x1 -#define PIT_CH_CTL_TMR16 0x2 -#define PIT_CH_CTL_TMR8 0x3 -#define PIT_CH_CTL_PWM 0x4 -#define PIT_CH_CTL_MIX16 0x6 -#define PIT_CH_CTL_MIX8 0x7 - - -/***************************************************************************** - * WDT - AG101 Core APB - ****************************************************************************/ - -//TODO -//finish this table -/***************************************************************************** - * RTC - AE210P APB - ****************************************************************************/ - - -//TODO -//Finish this table -/***************************************************************************** - * GPIO - AE210P APB - ****************************************************************************/ - -/***************************************************************************** - * I2C - AG101 Core APB - ****************************************************************************/ - -/***************************************************************************** - * SPI1 - AG101 Core APB - ****************************************************************************/ - -/***************************************************************************** - * SPI2 - AG101 Core APB - ****************************************************************************/ - -/***************************************************************************** - * APB_SLAVE_0_4 - AG101 Core APB - ****************************************************************************/ - - -/***************************************************************************** - * Interface & Definitions - ****************************************************************************/ - -/* TODO: timer-polling method */ -#if (defined(CONFIG_CPU_ICACHE_ENABLE) && defined(CONFIG_CPU_DCACHE_ENABLE)) - -#define _nds_kwait(count) \ - do { \ - volatile uint32_t i = 0; \ - while (i++ < (uint32_t)(count)) \ - ; \ - } while(0) -#else - -#define _nds_kwait(count) \ - do { \ - volatile uint32_t i = 0; \ - uint32_t c = (count > 0x10) ? count / 0x10 : 0x10; \ - while (i++ < (uint32_t)(c)) \ - ; \ - } while(0) -#endif - -#endif /* __AE210P_DEFS_H__ */ diff --git a/bsp/AE210P/board/ae210p_regs.h b/bsp/AE210P/board/ae210p_regs.h deleted file mode 100644 index 9c2f04eb9e..0000000000 --- a/bsp/AE210P/board/ae210p_regs.h +++ /dev/null @@ -1,315 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2014 - * All Rights Reserved. - * - ****************************************************************************/ - -#ifndef __AE210P_REGS_H__ -#define __AE210P_REGS_H__ - -#ifndef __ASSEMBLER__ -#include -#include -#endif - -#if (defined(CONFIG_CPU_ICACHE_ENABLE) || defined(CONFIG_CPU_DCACHE_ENABLE)) -/* - * The NTC1 is set to noncache region and NTM1 is mapped to partition 0 (I/O region). - * Map the I/O address to NTC1 to be uncachable. - */ -#define UNCACHE_MAP(addr) ((addr) | 0x40000000) -#else -#define UNCACHE_MAP(addr) (addr) -#endif - -#define _IO_(addr) UNCACHE_MAP(addr) - - -/***************************************************************************** - * ExLM - AE210P AHB - * **************************************************************************/ -#define EILM_BASE 0x00000000 -#ifdef CONFIG_OSC_SUPPORT -#define EDLM_BASE 0x00100000 -#else -#define EDLM_BASE 0x00200000 -#endif -#define SPIAHBMEM_BASE 0x00800000 - -/***************************************************************************** - * AHBC - AE210P AHB - ****************************************************************************/ -#define AHBC_BASE_4_7 _IO_(0x00400000) /* Vendor AHB Slave 8~9 */ -#define AHBC_BASE_0_3 _IO_(0x00E20000) /* Vendor AHB Slave 0~7 */ - -/***************************************************************************** - * BMC - AE210P AHB - ****************************************************************************/ -#define BMC_BASE _IO_(0x00E00000) /* Device base address */ - -/***************************************************************************** - * OSC - AE210P OSC - ****************************************************************************/ -#define OSC_BASE _IO_(0x00E01000) - -/* OSC register */ -#define OSC_CTRL (OSC_BASE + 0x00) -#define OSC_OVLFS (OSC_BASE + 0x04) -#define OSC_OVLBASE (OSC_BASE + 0x08) -#define OSC_OVLEND (OSC_BASE + 0x0C) -#define OSC_DMAST (OSC_BASE + 0x10) - -/***************************************************************************** - * DMAC - AE210P AHB - ****************************************************************************/ -#define DMAC_BASE _IO_(0x00E0E000) /* Device base address */ - -/***************************************************************************** - * APBBRG - AE210P APB - ****************************************************************************/ -#define APBBR_BASE _IO_(0x00F00000) /* Device base address */ - -/***************************************************************************** - * SMU - AE210P - ****************************************************************************/ -#define SMU_BASE _IO_(0x00F01000) /* Device base address */ - -/***************************************************************************** - * UARTx - AE210P - ****************************************************************************/ -#define UART1_BASE _IO_(0x00F02000) /* Device base address */ -#define UART2_BASE _IO_(0x00F03000) /* Device base address */ -#define STUARTC_BASE UART2_BASE /* standard/IR UART */ - -/* UART register offsets (4~8-bit width) */ -/* SD_LCR_DLAB == 0 */ -#define UARTC_RBR_OFFSET 0x20 /* receiver biffer register */ -#define UARTC_THR_OFFSET 0x20 /* transmitter holding register */ -#define UARTC_IER_OFFSET 0x24 /* interrupt enable register */ -#define UARTC_IIR_OFFSET 0x28 /* interrupt identification register */ -#define UARTC_FCR_OFFSET 0x28 /* FIFO control register */ -#define UARTC_LCR_OFFSET 0x2c /* line control regitser */ -#define UARTC_MCR_OFFSET 0x30 /* modem control register */ -#define UARTC_LSR_OFFSET 0x34 /* line status register */ -#define UARTC_TST_OFFSET 0x34 /* testing register */ -#define UARTC_MSR_OFFSET 0x38 /* modem status register */ -#define UARTC_SPR_OFFSET 0x3c /* scratch pad register */ - -/* SD_LCR_DLAB == 0 */ -#define UARTC_DLL_OFFSET 0x20 /* baudrate divisor latch LSB */ -#define UARTC_DLM_OFFSET 0x24 /* baudrate divisor latch MSB */ -#define UARTC_PSR_OFFSET 0x28 /* prescaler register */ - - -/***************************************************************************** - * PIT - AE210P - ****************************************************************************/ -#define PIT_BASE _IO_(0x00F04000) /* Device base address */ - -/* PIT register (32-bit width) */ -#define PIT_ID_REV (PIT_BASE + 0x00 ) /* (ro) PIT ID and Revision Register */ -#define PIT_CFG (PIT_BASE + 0x10 ) /* (ro) PIT Configuration Register */ -#define PIT_INT_EN (PIT_BASE + 0x14 ) /* (rw) PIT Interrupt Enable Register*/ -#define PIT_INT_ST (PIT_BASE + 0x18 ) /* (w1c) PIT Interrupt Status Register*/ -#define PIT_CH_EN (PIT_BASE + 0x1C ) /* (rw) PIT Channel Enable Register */ - -/* _chn_ from 0 to 3*/ -/* (rw) PIT Channel x Control Register (32-bit width) */ -#define PIT_CHNx_CTL(_chn_) ( PIT_BASE + 0x20 + ( (_chn_)* 0x10) ) - -/* (rw) PIT Channel x Reload Register (32-bit width) */ -#define PIT_CHNx_LOAD(_chn_) ( PIT_BASE + 0x24 + ( (_chn_)* 0x10) ) - -/* (ro) PIT Channel x Counter Register (32-bit width) */ -#define PIT_CHNx_COUNT(_chn_) ( PIT_BASE + 0x28 + ( (_chn_)* 0x10) ) - - -/***************************************************************************** - * WDT - AE210P - ****************************************************************************/ -#define WDTC_BASE _IO_(0x00F05000) /* Device base address */ - -/***************************************************************************** - * RTC - AE210P - ****************************************************************************/ -#define RTC_BASE _IO_(0x00F06000) /* Device base address */ - -/***************************************************************************** - * GPIO - AE210P - ****************************************************************************/ -#define GPIOC_BASE _IO_(0x00F07000) /* Device base address */ - -/***************************************************************************** - * I2C - AE210P - ****************************************************************************/ -#define I2C_BASE _IO_(0x00F0A000) /* Device base address */ - -/***************************************************************************** - * SPI1 - AE210P - ****************************************************************************/ -#define SPI1_BASE _IO_(0x00F0B000) /* Device base address */ - -/***************************************************************************** - * I2S/AC97 - AE210P (SSP2) - ****************************************************************************/ -#define SPI2_BASE _IO_(0x00F0F000) /* Device base address */ - -/***************************************************************************** - * APB_SLAVE - AE210P Vender APB Slave 0~4 - ****************************************************************************/ -#define APB_SLAVE_BASE _IO_(0x00F19000) /* Device base address */ - - -/***************************************************************************** - * Macros for Register Access - ****************************************************************************/ -#define REG32(reg) ( *( (volatile uint32_t *) (reg) ) ) - -#ifdef REG_IO_HACK - -/* 8 bit access */ -//#define IN8(reg) ( *( (volatile uint8_t *) (reg) ) ) -#define OUT8(reg, data) ( (*( (volatile uint8_t *) (reg) ) ) = (uint8_t)(data) ) - -#define CLR8(reg) ( *( (volatile uint8_t *) (reg) ) = (uint8_t)0 ) -#define MASK8(reg, mask) ( *( (volatile uint8_t *) (reg) ) & (uint8_t)(mask) ) -#define UMSK8(reg, mask) ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) - -#define SETR8SHL(reg, mask, shift, v) ( *( (volatile uint8_t *) (reg) ) = \ - ( ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) | \ - ( ( (uint8_t)(v) << (shift) ) & (uint8_t)(mask) ) ) ) - -#define SETR8(reg, mask) ( *( (volatile uint8_t *) (reg) ) = \ - ( ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) | (uint8_t)(mask) ) ) - -#define CLRR8(reg, mask) ( *( (volatile uint8_t *) (reg) ) &= ~( (uint8_t)(mask) ) ) - -#define SETB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) |= (uint8_t)( (uint8_t)1 << (bit) ) ) -#define CLRB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) &= ( ~( (uint8_t) ( (uint8_t)1 << (bit) ) ) ) ) -#define GETB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) & (uint8_t) ( (uint8_t)1 << (bit) ) ) -#define GETB8SHR(reg, bit) ( (*( (volatile uint8_t *) (reg) ) & (uint8_t) ( (uint8_t)1 << (bit) )) >> (bit) ) - -/* 16 bit access */ -#define IN16(reg) ( *( (volatile uint16_t *) (reg) ) ) -#define OUT16(reg, data) ( (*( (volatile uint16_t *) (reg) ) ) = (uint16_t)(data) ) - -#define CLR16(reg) ( *( (volatile uint16_t *) (reg) ) = (uint16_t)0 ) -#define MASK16(reg, mask) ( *( (volatile uint16_t *) (reg) ) & (uint16_t)(mask) ) -#define UMSK16(reg, mask) ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) - -#define SETR16SHL(reg, mask, shift, v) ( *( (volatile uint16_t *) (reg) ) = \ - ( ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) | \ - ( ( (uint16_t)(v) << (shift) ) & (uint16_t)(mask) ) ) ) - -#define SETR16(reg, mask) ( *( (volatile uint16_t *) (reg) ) = \ - ( ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) | (uint16_t)(mask) ) ) - -#define CLRR16(reg, mask) ( *( (volatile uint16_t *) (reg) ) &= ~( (uint16_t)(mask) ) ) - -#define SETB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) |= (uint16_t)( (uint16_t)1 << (bit) ) ) -#define CLRB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) &= ( ~( (uint16_t) ( (uint16_t)1 << (bit) ) ) ) ) -#define GETB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) & (uint16_t) ( (uint16_t)1 << (bit) ) ) -#define GETB16SHR(reg, bit) ( (*( (volatile uint16_t *) (reg) ) & (uint16_t) ( (uint16_t)1 << (bit) )) >> (bit) ) - -/* 32 bit access */ -#define IN32(reg) _IN32((uint32_t)(reg)) -#define OUT32(reg, data) _OUT32((uint32_t)(reg), (uint32_t)(data)) - -#define CLR32(reg) _CLR32((uint32_t)(reg)) -#define MASK32(reg, mask) _MASK32((uint32_t)(reg), (uint32_t)(mask)) -#define UMSK32(reg, mask) _UMSK32((uint32_t)(reg), (uint32_t)(mask)) - -#define SETR32SHL(reg, mask, shift, v) _SETR32SHL((uint32_t)(reg), (uint32_t)(mask), (uint32_t)(shift), (uint32_t)(v)) -#define SETR32(reg, mask) _SETR32((uint32_t)(reg), (uint32_t)(mask)) -#define CLRR32(reg, mask) _CLRR32((uint32_t)(reg), (uint32_t)(mask)) - -#define SETB32(reg, bit) _SETB32((uint32_t)(reg), (uint32_t)(bit)) -#define CLRB32(reg, bit) _CLRB32((uint32_t)(reg), (uint32_t)(bit)) -#define GETB32(reg, bit) _GETB32((uint32_t)(reg), (uint32_t)(bit)) -#define GETB32SHR(reg, bit) _GETB32SHR((uint32_t)(reg), (uint32_t)(bit)) - -#else /* REG_IO_HACK */ - -/* 8 bit access */ -//#define IN8(reg) ( *( (volatile uint8_t *) (reg) ) ) -#define OUT8(reg, data) ( (*( (volatile uint8_t *) (reg) ) ) = (uint8_t)(data) ) - -#define CLR8(reg) ( *( (volatile uint8_t *) (reg) ) = (uint8_t)0 ) -#define MASK8(reg, mask) ( *( (volatile uint8_t *) (reg) ) & (uint8_t)(mask) ) -#define UMSK8(reg, mask) ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) - -#define SETR8SHL(reg, mask, shift, v) ( *( (volatile uint8_t *) (reg) ) = \ - ( ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) | \ - ( ( (uint8_t)(v) << (shift) ) & (uint8_t)(mask) ) ) ) - -#define SETR8(reg, mask) ( *( (volatile uint8_t *) (reg) ) = \ - ( ( *( (volatile uint8_t *) (reg) ) & ~( (uint8_t)(mask) ) ) | (uint8_t)(mask) ) ) - -#define CLRR8(reg, mask) ( *( (volatile uint8_t *) (reg) ) &= ~( (uint8_t)(mask) ) ) - -#define SETB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) |= (uint8_t)( (uint8_t)1 << (bit) ) ) -#define CLRB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) &= ( ~( (uint8_t) ( (uint8_t)1 << (bit) ) ) ) ) -#define GETB8(reg, bit) ( *( (volatile uint8_t *) (reg) ) & (uint8_t) ( (uint8_t)1 << (bit) ) ) -#define GETB8SHR(reg, bit) ( (*( (volatile uint8_t *) (reg) ) & (uint8_t) ( (uint8_t)1 << (bit) )) >> (bit) ) - -/* 16 bit access */ -#define IN16(reg) ( *( (volatile uint16_t *) (reg) ) ) -#define OUT16(reg, data) ( (*( (volatile uint16_t *) (reg) ) ) = (uint16_t)(data) ) - -#define CLR16(reg) ( *( (volatile uint16_t *) (reg) ) = (uint16_t)0 ) -#define MASK16(reg, mask) ( *( (volatile uint16_t *) (reg) ) & (uint16_t)(mask) ) -#define UMSK16(reg, mask) ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) - -#define SETR16SHL(reg, mask, shift, v) ( *( (volatile uint16_t *) (reg) ) = \ - ( ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) | \ - ( ( (uint16_t)(v) << (shift) ) & (uint16_t)(mask) ) ) ) - -#define SETR16(reg, mask) ( *( (volatile uint16_t *) (reg) ) = \ - ( ( *( (volatile uint16_t *) (reg) ) & ~( (uint16_t)(mask) ) ) | (uint16_t)(mask) ) ) -#define CLRR16(reg, mask) ( *( (volatile uint16_t *) (reg) ) &= ~( (uint16_t)(mask) ) ) - -#define SETB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) |= (uint16_t)( (uint16_t)1 << (bit) ) ) -#define CLRB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) &= ( ~( (uint16_t) ( (uint16_t)1 << (bit) ) ) ) ) -#define GETB16(reg, bit) ( *( (volatile uint16_t *) (reg) ) & (uint16_t) ( (uint16_t)1 << (bit) ) ) -#define GETB16SHR(reg, bit) ( (*( (volatile uint16_t *) (reg) ) & (uint16_t) ( (uint16_t)1 << (bit) )) >> (bit) ) - -/* 32 bit access */ -#define IN32(reg) ( *( (volatile uint32_t *) (reg) ) ) -#define OUT32(reg, data) ( (*( (volatile uint32_t *) (reg) ) ) = (uint32_t)(data) ) - -#define CLR32(reg) ( *( (volatile uint32_t *) (reg) ) = (uint32_t)0 ) -#define MASK32(reg, mask) ( *( (volatile uint32_t *) (reg) ) & (uint32_t)(mask) ) -#define UMSK32(reg, mask) ( *( (volatile uint32_t *) (reg) ) & ~( (uint32_t)(mask) ) ) - -#define SETR32SHL(reg, mask, shift, v) ( *( (volatile uint32_t *) (reg) ) = \ - ( ( *( (volatile uint32_t *) (reg) ) & ~( (uint32_t)(mask) ) ) | \ - ( ( (uint32_t)(v) << (shift) ) & (uint32_t)(mask) ) ) ) - -#define SETR32(reg, mask) ( *( (volatile uint32_t *) (reg) ) = \ - ( ( *( (volatile uint32_t *) (reg) ) & ~( (uint32_t)(mask) ) ) | (uint32_t)(mask) ) ) - -#define CLRR32(reg, mask) ( *( (volatile uint32_t *) (reg) ) &= ~( (uint32_t)(mask) ) ) - -#define SETB32(reg, bit) ( *( (volatile uint32_t *) (reg) ) |= (uint32_t)( (uint32_t)1 << (bit) ) ) -#define CLRB32(reg, bit) ( *( (volatile uint32_t *) (reg) ) &= ( ~( (uint32_t) ( (uint32_t)1 << (bit) ) ) ) ) -#define GETB32(reg, bit) ( *( (volatile uint32_t *) (reg) ) & (uint32_t) ( (uint32_t)1 << (bit) ) ) -#define GETB32SHR(reg, bit) ( (*( (volatile uint32_t *) (reg) ) & (uint32_t) ( (uint32_t)1 << (bit) )) >> (bit) ) - -#endif /* REG_IO_HACK */ - -#define SR_CLRB32(reg, bit) \ -{ \ - int mask = __nds32__mfsr(reg)& ~(1<parent.user_data; - - __drv_uart_init(uartDev->uart_base, cfg->baud_rate); - - // todo : enable FIFO threshold, enable rx & rx timeout(threshold) interrupt - - return RT_EOK; -} - -static rt_err_t __uart_control(struct rt_serial_device *serial, int cmd, void *arg) -{ - struct uart_device *uartDev = RT_NULL; - - RT_ASSERT(serial != RT_NULL); - uartDev = (struct uart_device *)serial->parent.user_data; - - switch (cmd) - { - case RT_DEVICE_CTRL_CLR_INT: /* disable rx irq */ - UART_DISABLE_IRQ(uartDev->irq); - break; - - case RT_DEVICE_CTRL_SET_INT: /* enable rx irq */ - UART_ENABLE_IRQ(uartDev->irq); - break; - - default: - break; - } - - return RT_EOK; -} - -static int __uart_putc(struct rt_serial_device *serial, char c) -{ - struct uart_device *uartDev = RT_NULL; - - RT_ASSERT(serial != RT_NULL); - - uartDev = (struct uart_device *)serial->parent.user_data; - - __drv_uart_put_char(uartDev->uart_base, c); // Transmit Data - - return 1; -} - -static int __uart_getc(struct rt_serial_device *serial) -{ - int ch = -1; - struct uart_device *uartDev = RT_NULL; - - RT_ASSERT(serial != RT_NULL); - uartDev = (struct uart_device *)serial->parent.user_data; - - ch = -1; - - if (__drv_uart_is_kbd_hit(uartDev->uart_base)) - { - ch = __drv_uart_get_char(uartDev->uart_base) & 0x00FF; - } - - return ch; -} - -static const struct rt_uart_ops __uart_ops = -{ - __uart_configure, - __uart_control, - __uart_putc, - __uart_getc, - RT_NULL -}; - -#if RT_USING_UART01 -struct uart_device uartDev01 = -{ // UART01 device driver structure - UART1_BASE, - IRQ_UART1_VECTOR -}; - -struct rt_serial_device serial01; - -void URT01_IRQHandler(void) -{ - struct uart_device *uartDev = RT_NULL; - - uartDev = &uartDev01; - - rt_interrupt_enter(); /* enter interrupt */ - -// if (uart->uart_device->Interrupt & ((1 << bsUART_TIMEOUT_INTENAB) | (1 << bsUART_RECEIVE_INTENAB))) // RX -// { -// rt_hw_serial_isr(&serial01, RT_SERIAL_EVENT_RX_IND); -// } -// -// if (uart->uart_device->Interrupt & (1 << bsUART_TRANSMIT_INTENAB)) // TX -// { -// ; -// } -// -// /* clear all interrupt */ -// uart->uart_device->IntClear = (1 << bsUART_RECEIVE_INTENAB) -// | (1 << bsUART_TRANSMIT_INTENAB) -// | (1 << bsUART_TIMEOUT_INTENAB); - - rt_interrupt_leave(); /* leave interrupt */ -} -#endif /* RT_USING_UART01 */ - -#if RT_USING_UART02 -struct uart_device uartDev02 = -{ // UART02 device driver structure - UART2_BASE, - IRQ_UATR2_VECTOR -}; - -struct rt_serial_device serial02; - -void URT02_IRQHandler(void) -{ - struct uart_device *uartDev = RT_NULL; - - uartDev = &uartDev02; - - rt_interrupt_enter(); /* enter interrupt */ - - uartDev = uartDev; - - rt_interrupt_leave(); /* leave interrupt */ -} -#endif /* RT_USING_UART02 */ - -void rt_hw_usart_init(void) -{ - struct uart_device *uartDev = RT_NULL; - struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT; - -#if RT_USING_UART01 - uart = &uartDev01; - config.baud_rate = BAUD_RATE_38400; - - serial01.ops = &__uart_ops; - serial01.config = config; - - // set interrupt priority level - // disable interrupt - - // register UART01 device - rt_hw_serial_register(&serial01, "uart01", - RT_DEVICE_FLAG_RDWR /*| RT_DEVICE_FLAG_INT_RX*/, - uartDev); -#endif /* RT_USING_UART01 */ - -#if RT_USING_UART02 - uartDev = &uartDev02; - - config.baud_rate = BAUD_RATE_38400; - serial02.ops = &__uart_ops; - serial02.config = config; - - // set interrupt priority level - // disable interrupt - - /* register UART02 device */ - rt_hw_serial_register(&serial02, "uart02", - RT_DEVICE_FLAG_RDWR /*| RT_DEVICE_FLAG_INT_RX*/, - uartDev); - #endif /* RT_USING_UART02 */ -} - diff --git a/bsp/AE210P/board/uart_dev.h b/bsp/AE210P/board/uart_dev.h deleted file mode 100644 index 5cc57d04d8..0000000000 --- a/bsp/AE210P/board/uart_dev.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * File : uart_dev.h - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-01-05 Bernard the first version - */ - -#ifndef __UART_DEV_H__ -#define __UART_DEV_H__ - -#include "rthw.h" -#include "rtthread.h" - -void rt_hw_usart_init(void); - -#endif // end of "__UART_DEV_H__" diff --git a/bsp/AE210P/bsp_hal.h b/bsp/AE210P/bsp_hal.h deleted file mode 100644 index c93a906c6d..0000000000 --- a/bsp/AE210P/bsp_hal.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef __PLAT_HAL_H_ -#define __PLAT_HAL_H_ - -#include "inttypes.h" - - -/******************************** - * INTC HAL DEFINE - ********************************/ - -#define IRQ_EDGE_TRIGGER 1 -#define IRQ_LEVEL_TRIGGER 0 - -#define IRQ_ACTIVE_HIGH 1 -#define IRQ_ACTIVE_LOW 0 - -void hal_intc_init(); -void hal_intc_swi_enable(); -void hal_intc_swi_disable(); -void hal_intc_swi_clean(); -void hal_intc_swi_trigger(); - -/* Call by HISR. - * Since our mask/unmask are not atomic. - * And HISR is task level ISR in RTOS, we need make sure it is atomic. - * - * TODO remove gie if atomic - */ -#define HAL_INTC_IRQ_ATOMIC_DISABLE(_irq_) \ - do \ - { \ - unsigned long _gie_; \ - GIE_SAVE(&_gie_); \ - hal_intc_irq_disable(_irq_); \ - GIE_RESTORE(_gie_); \ - } while(0) - -#define HAL_INTC_IRQ_ATOMIC_ENABLE(_irq_) \ - do \ - { \ - unsigned long _gie_; \ - GIE_SAVE(&_gie_); \ - hal_intc_irq_enable(_irq_); \ - GIE_RESTORE(_gie_); \ - } while(0) - - -uint32_t hal_intc_irq_mask(int _irqs_); -void hal_intc_irq_unmask(int _irqs_); -void hal_intc_irq_clean(int _irqs_); -void hal_intc_irq_clean_all(); -void hal_intc_irq_enable(uint32_t _irqs_); -void hal_intc_irq_disable(uint32_t _irqs_); -void hal_intc_irq_disable_all(); -void hal_intc_irq_set_priority(uint32_t _prio_ ); -void hal_intc_irq_config(uint32_t _irqs_, uint32_t _edge_, uint32_t _falling_); -uint32_t hal_intc_get_all_pend(); - -/******************************** - * TIMER HAL DEFINE - ********************************/ - -uint32_t hal_timer_irq_mask(uint32_t _tmr_ ); -void hal_timer_irq_unmask(uint32_t _msk_ ); -void hal_timer_irq_clear(uint32_t _tmr_ ); -void hal_timer_start(uint32_t _tmr_); -void hal_timer_stop(uint32_t _tmr_ ); -uint32_t hal_timer_read(uint32_t _tmr_ ); -void hal_timer_set_period(uint32_t _tmr_, uint32_t _period_ ); -void hal_timer_set_upward(uint32_t _tmr_ ,uint32_t up); -void hal_timer_init(uint32_t _tmr_ ); -void hal_timer_irq_control(uint32_t _tmr_, uint32_t enable ); -uint32_t hal_timer_irq_status(uint32_t _tmr_); -void hal_timer_set_match1(uint32_t _tmr_ , uint32_t match ); -uint32_t hal_timer_count_read(uint32_t _tmr_); - -#endif diff --git a/bsp/AE210P/cache.c b/bsp/AE210P/cache.c deleted file mode 100644 index 97cb251741..0000000000 --- a/bsp/AE210P/cache.c +++ /dev/null @@ -1,273 +0,0 @@ -#include "nds32.h" -#include "cache.h" -#include "string.h" - -void nds32_dcache_invalidate(void){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE - __nds32__cctl_l1d_invalall(); - - __nds32__msync_store(); - __nds32__dsb(); -#endif -} - -void nds32_dcache_flush(void){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - unsigned long saved_gie; -#endif - unsigned long end; - unsigned long cache_line; - - cache_line = CACHE_LINE_SIZE(DCACHE); - end = CACHE_WAY(DCACHE) * CACHE_SET(DCACHE) * cache_line; - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - GIE_SAVE(&saved_gie); - - /* - * Use CCTL L1D_IX_WB/L1D_IX_INVAL subtype instead of combined - * L1D_IX_WBINVAL. Because only N903 supports L1D_IX_WBINVAL. - */ - do { - end -= cache_line; - __nds32__cctlidx_wbinval(NDS32_CCTL_L1D_IX_WB, end); - __nds32__cctlidx_wbinval(NDS32_CCTL_L1D_IX_INVAL, end); - } while (end > 0); - GIE_RESTORE(saved_gie); -#else - while (end > 0){ - end -= cache_line; - __nds32__cctlidx_wbinval(NDS32_CCTL_L1D_IX_INVAL, end); - } -#endif - __nds32__msync_store(); - __nds32__dsb(); -#endif -} - -void nds32_icache_flush(void){ - -#ifdef CONFIG_CPU_ICACHE_ENABLE - unsigned long end; - unsigned long cache_line = CACHE_LINE_SIZE(ICACHE); - - end = CACHE_WAY(ICACHE) * CACHE_SET(ICACHE) * CACHE_LINE_SIZE(ICACHE); - - do { - end -= cache_line; - __nds32__cctlidx_wbinval(NDS32_CCTL_L1I_IX_INVAL, end); - } while (end > 0); - - __nds32__isb(); -#endif -} - -#ifdef CONFIG_CHECK_RANGE_ALIGNMENT -#define chk_range_alignment(start, end, line_size) do { \ - \ - BUG_ON((start) & ((line_size) - 1)); \ - BUG_ON((end) & ((line_size) - 1)); \ - BUG_ON((start) == (end)); \ - \ -} while (0); -#else -#define chk_range_alignment(start, end, line_size) -#endif -/* ================================ D-CACHE =============================== */ -/* - * nds32_dcache_clean_range(start, end) - * - * For the specified virtual address range, ensure that all caches contain - * clean data, such that peripheral accesses to the physical RAM fetch - * correct data. - */ -void nds32_dcache_clean_range(unsigned long start, unsigned long end){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(DCACHE); - chk_range_alignment(start, end, line_size); - - while (end > start){ - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1D_VA_WB, (void *)start); - start += line_size; - } - - __nds32__msync_store(); - __nds32__dsb(); -#endif -#endif -} - -void nds32_dma_clean_range(unsigned long start, unsigned long end){ - - unsigned long line_size; - line_size = CACHE_LINE_SIZE(DCACHE); - start = start & (~(line_size-1)); - end = (end + line_size -1) & (~(line_size-1)); - if (start == end) - return; - - nds32_dcache_clean_range(start, end); -} - -/* - * nds32_dcache_invalidate_range(start, end) - * - * throw away all D-cached data in specified region without an obligation - * to write them back. Note however that we must clean the D-cached entries - * around the boundaries if the start and/or end address are not cache - * aligned. - */ -void nds32_dcache_invalidate_range(unsigned long start, unsigned long end){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE - - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(DCACHE); - chk_range_alignment(start, end, line_size); - - while (end > start){ - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1D_VA_INVAL, (void *)start); - start += line_size; - } -#endif -} - -void nds32_dcache_flush_range(unsigned long start, unsigned long end){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(DCACHE); - - while (end > start){ -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1D_VA_WB, (void *)start); -#endif - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1D_VA_INVAL, (void *)start); - start += line_size; - } -#endif -} - -void nds32_dcache_writeback_range(unsigned long start, unsigned long end){ - -#ifdef CONFIG_CPU_DCACHE_ENABLE -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(DCACHE); - - while (end > start){ - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1D_VA_WB, (void *)start); - start += line_size; - } -#endif -#endif -} -void unaligned_cache_line_move(unsigned char* src, unsigned char* dst, unsigned long len ) -{ - int i; - unsigned char* src_p = (unsigned char*)src; - unsigned char* dst_p = (unsigned char*)dst; - for( i = 0 ;i < len; ++i) - *(dst_p+i)=*(src_p+i); -} - - - -void nds32_dma_inv_range(unsigned long start, unsigned long end){ - unsigned long line_size; - unsigned long old_start=start; - unsigned long old_end=end; - line_size = CACHE_LINE_SIZE(DCACHE); - unsigned char h_buf[line_size]; - unsigned char t_buf[line_size]; - memset((void*)h_buf,0,line_size); - memset((void*)t_buf,0,line_size); - - start = start & (~(line_size-1)); - end = (end + line_size -1) & (~(line_size-1)); - if (start == end) - return; - if (start != old_start) - { - //nds32_dcache_flush_range(start, start + line_size); - unaligned_cache_line_move((unsigned char*)start, h_buf, old_start - start); - } - if (end != old_end) - { - //nds32_dcache_flush_range(end - line_size ,end); - unaligned_cache_line_move((unsigned char*)old_end, t_buf, end - old_end); - - } - nds32_dcache_invalidate_range(start, end); - - //handle cache line unaligned problem - if(start != old_start) - unaligned_cache_line_move(h_buf,(unsigned char*)start, old_start - start); - - if( end != old_end ) - unaligned_cache_line_move(t_buf,(unsigned char*)old_end, end - old_end); - -} - - -void nds32_dma_flush_range(unsigned long start, unsigned long end){ - - unsigned long line_size; - line_size = CACHE_LINE_SIZE(DCACHE); - start = start & (~(line_size-1)); - end = (end + line_size -1 ) & (~(line_size-1)); - if (start == end) - return; - - nds32_dcache_flush_range(start, end); -} - -/* ================================ I-CACHE =============================== */ -/* - * nds32_icache_invalidate_range(start, end) - * - * invalidate a range of virtual addresses from the Icache - * - * This is a little misleading, it is not intended to clean out - * the i-cache but to make sure that any data written to the - * range is made consistant. This means that when we execute code - * in that region, everything works as we expect. - * - * This generally means writing back data in the Dcache and - * write buffer and flushing the Icache over that region - * - * start: virtual start address - * end: virtual end address - */ -void nds32_icache_invalidate_range(unsigned long start, unsigned long end){ - -#ifdef CONFIG_CPU_ICACHE_ENABLE - - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(ICACHE); - //chk_range_alignment(start, end, line_size); - start &= (~(line_size-1)); - end = ( end + line_size - 1 )&(~(line_size-1)); - if (end == start) - end += line_size; - - while (end > start){ - - end -= line_size; - __nds32__cctlva_wbinval_one_lvl(NDS32_CCTL_L1I_VA_INVAL, (void *)end); - } -#endif -} diff --git a/bsp/AE210P/cache.h b/bsp/AE210P/cache.h deleted file mode 100644 index 5ed3e6951f..0000000000 --- a/bsp/AE210P/cache.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __CACHE_H__ -#define __CACHE_H__ - -#include "nds32_intrinsic.h" -#include "nds32.h" - -enum cache_t{ICACHE, DCACHE}; - -static inline unsigned long CACHE_SET(enum cache_t cache){ - - if(cache == ICACHE) - return 64 << ((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskISET) >> ICM_CFG_offISET); - else - return 64 << ((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDSET) >> DCM_CFG_offDSET); -} - -static inline unsigned long CACHE_WAY(enum cache_t cache){ - - if(cache == ICACHE) - return 1 + ((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskIWAY) >> ICM_CFG_offIWAY); - else - return 1 + ((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDWAY) >> DCM_CFG_offDWAY); -} - -static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache){ - - if(cache == ICACHE) - return 8 << (((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskISZ) >> ICM_CFG_offISZ) - 1); - else - return 8 << (((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDSZ) >> DCM_CFG_offDSZ) - 1); -} - -extern void nds32_dcache_invalidate(void); -extern void nds32_dcache_flush(void); -extern void nds32_icache_flush(void); -extern void nds32_dcache_clean_range(unsigned long start, unsigned long end); -extern void nds32_dma_clean_range(unsigned long start, unsigned long end); -extern void nds32_dcache_invalidate_range(unsigned long start, unsigned long end); -extern void nds32_dcache_flush_range(unsigned long start, unsigned long end); -extern void nds32_dcache_writeback_range(unsigned long start, unsigned long end); -extern void nds32_dma_inv_range(unsigned long start, unsigned long end); -extern void nds32_dma_flush_range(unsigned long start, unsigned long end); -extern void nds32_icache_invalidate_range(unsigned long start, unsigned long end); - -#endif /* __CACHE_H__ */ diff --git a/bsp/AE210P/config.h b/bsp/AE210P/config.h deleted file mode 100644 index 00aa299516..0000000000 --- a/bsp/AE210P/config.h +++ /dev/null @@ -1,48 +0,0 @@ -#define CONFIG_HEARTBEAT_LED 1 - -/* - * Select Platform - */ -#ifdef AE210P -#define CONFIG_PLAT_AE210P 1 -#define IRQ_STACK_SIZE 5120 /* IRQ stack size */ -#else -#error "No valid platform is defined!" -#endif - -/* - * Platform Option - */ -#define VECTOR_BASE 0x00000000 - -#define VECTOR_NUMINTRS 32 -#define NO_EXTERNAL_INT_CTL 1 -#define XIP_MODE 1 - -#ifdef CONFIG_OSC_SUPPORT -#define OSC_EILM_SIZE 0x10000 // 64KB -#undef XIP_MODE -#endif - -#undef CONFIG_HW_PRIO_SUPPORT - -/* - * Cache Option - */ -#if (!defined(__NDS32_ISA_V3M__) && defined(CONFIG_CACHE_SUPPORT)) -#define CONFIG_CPU_ICACHE_ENABLE 1 -#define CONFIG_CPU_DCACHE_ENABLE 1 -//#define CONFIG_CPU_DCACHE_WRITETHROUGH 1 -#endif - -#undef CONFIG_CHECK_RANGE_ALIGNMENT -#undef CONFIG_CACHE_L2 -#undef CONFIG_FULL_ASSOC - -/* - * Debugging Options - */ -#undef CONFIG_DEBUG -#undef CONFIG_WERROR - -#include "ae210p.h" diff --git a/bsp/AE210P/debug.h b/bsp/AE210P/debug.h deleted file mode 100644 index 75aeef6498..0000000000 --- a/bsp/AE210P/debug.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __DEBUG_H__ -#define __DEBUG_H__ - -#include - -#define DEBUG(enable, tagged, ...) \ - do \ - { \ - if (enable) \ - { \ - if (tagged) \ - fprintf(stderr, "[ %25s() ] ", __func__); \ - fprintf(stderr, __VA_ARGS__); \ - } \ - } while( 0) - -#define ERROR(...) DEBUG(1, 1, "ERROR:"__VA_ARGS__) - -#define KASSERT(cond) \ -{ \ - if (!(cond)) \ - { \ - ERROR("Failed assertion in %s:\n" \ - "%s at %s\n" \ - "line %d\n" \ - "RA=%lx\n", \ - __func__, \ - #cond, \ - __FILE__, \ - __LINE__, \ - (unsigned long)__builtin_return_address(0)); \ - \ - while (1) \ - ; \ - } \ -} - -#define KPANIC(args, ...) \ -{ \ - ERROR(args, __VA_ARGS__); \ - while (1) ; \ -} - -static inline void dump_mem(const void *mem, int count) -{ - const unsigned char *p = mem; - int i = 0; - - for(i = 0; i < count; i++) - { - if( i % 16 == 0) - DEBUG(1, 0, "\n"); - - DEBUG(1, 0, "%02x ", p[i]); - } -} - -/* help to trace back */ -static inline void dump_stack(void) -{ - unsigned long *stack; - unsigned long addr; - - __asm__ __volatile__ ("\tori\t%0, $sp, #0\n" : "=r" (stack)); - - printf("Call Trace:\n"); - addr = *stack; - while (addr) - { - addr = *stack++; - printf("[<%08lx>] ", addr); - } - printf("\n"); - - return; -} - -#endif /* __DEBUG_H__ */ diff --git a/bsp/AE210P/driver/dma/Kbuild b/bsp/AE210P/driver/dma/Kbuild deleted file mode 100644 index 18faadf0a5..0000000000 --- a/bsp/AE210P/driver/dma/Kbuild +++ /dev/null @@ -1,2 +0,0 @@ -lib-y := -lib-y += dmad.o diff --git a/bsp/AE210P/driver/dma/dmad.c b/bsp/AE210P/driver/dma/dmad.c deleted file mode 100644 index 5aa67218c1..0000000000 --- a/bsp/AE210P/driver/dma/dmad.c +++ /dev/null @@ -1,2513 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * dmad.c - * - * DESCRIPTION - * - * DMA controller driver internal supplement library. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * dmad.h - * - ****************************************************************************/ -#include "dmad.h" -#include "cache.h" -#include "bsp_hal.h" - -// #define DMAD_POLLING -#define DMAD_AHB_MAX_CHANNELS DMAC_MAX_CHANNELS -#define DMAD_APB_MAX_CHANNELS APBBR_DMA_MAX_CHANNELS -#define DMAD_DRB_POOL_SIZE 128 /* 64 // 128*/ - -//#define DMAD_HISR_PRIORITY 0 // 0: highest, 2: lowest -#define DMAD_HISR_STACK_SIZE 4096 // Please align to 32-bit - -#ifdef CONFIG_PLAT_AG101P_4GB - #define NTC0_BONDER_START 0x00000000 - #define NTC0_BONDER_END 0x40000000 -#else - #define NTC0_BONDER_START 0x00000000 - #define NTC0_BONDER_END 0x00400000 -#endif - -/* - * DMA module is shared between drivers and has no specific - * initialization entry point. For this reason, it's stack - * pool is declared in the global data or bss section. - */ -static uint32_t dmad_hisr_stack[DMAD_HISR_STACK_SIZE]; - -/* Driver data structure, one instance per system */ -typedef struct DMAD_DATA_STRUCT{ - - /* Driver data initialization flag */ - uint32_t init; /* init flag for this object */ - uint32_t drq_pool_mutex_init; /* init flag for DMA queue pool access control object */ - uint32_t ahb_lisr_registered; /* init flag for AHB DMA LISR */ - uint32_t apb_lisr_registered; /* init flag for APB DMA LISR */ - uint32_t hisr_registered; /* init flag for HISR */ - - /* DMA queue pool access control object */ - hal_mutex_t drq_pool_mutex; /* Mutex for access control of DRQ (DMA Request Queue) pool between tasks */ - - /* DMA HISR resources */ - hal_bh_t hisr; /* HISR kernel object, used to perform deffered tasks of DMA LISR */ - uint32_t hisr_as; /* HISR activation state (for the single HISR to identify who activated it) */ - -} DMAD_DATA; - -/* Driver data structure instance, one instance per system */ -static DMAD_DATA dmad; - -/* DMA request queue, one instance per channel */ -typedef struct DMAD_DRQ_STRUCT{ - - uint32_t allocated; /* Flag to indicate the channel allocation status */ - DMAD_DATA *dmad; /* Pointer to driver object (DMAD_DATA) */ - - uint32_t channel_base; /* DMA channel register base address */ - - hal_mutex_t drb_pool_mutex; /* Mutex for access control of DRB (DMA Request Block) pool between tasks */ - DMAD_DRB drb_pool[DMAD_DRB_POOL_SIZE]; /* DRB (DMA Request Block) pool for this channel */ - hal_semaphore_t drb_sem; - - uint32_t fre_head; /* Free(un-allocated, completed) DRB linked list head */ - uint32_t fre_tail; /* Free(un-allocated, completed) DRB linked list tail */ - - uint32_t rdy_head; /* Ready(allocated, un-submitted) DRB linked list head */ - uint32_t rdy_tail; /* Ready(allocated, un-submitted) DRB linked list tail */ - - uint32_t sbt_head; /* Submitted DRB linked list head */ - uint32_t sbt_tail; /* Submitted DRB linked list tail */ - - uint32_t cpl_head; /* Completed (those need to notify client) DRB linked list head */ - uint32_t cpl_tail; /* Completed (those need to notify client) DRB linked list tail */ - - /* - * cache writeback function - * - * source destination writeback invalidate function - * --------------------------------------------------------------------------------------------------- - * memory -> memory v (for src data) v (for dest readback) NDS_DCache_Invalidate_Flush() - * device -> memory v (for invalidate) v (for dest readback) NDS_DCache_Invalidate_Flush() - * memory -> device v (for src data) x NDS_DCache_Flush() - * device -> device x x null - */ - void (*dc_writeback)(unsigned long start, unsigned long end); - void (*dc_invalidate)(unsigned long start, unsigned long end); - -} DMAD_DRQ; - -/* DMA queue for AHB DMA channels */ -static DMAD_DRQ ahb_drq_pool[DMAD_AHB_MAX_CHANNELS]; - -/* DMA queue for APB DMA channels */ -static DMAD_DRQ apb_drq_pool[DMAD_APB_MAX_CHANNELS]; - -/* AHB DMAC channel re-route table structure */ -typedef struct _DMAD_AHB_CH_ROUTE { - -// uint32_t dev_reqn; /* device req/gnt number */ - uint32_t route_cr; /* routing control register address */ - -} DMAD_AHB_CH_ROUTE; - -/* AHB DMAC channel re-route table. Indexed by AHB DMAC req/ack number. */ -static DMAD_AHB_CH_ROUTE dmad_ahb_ch_route_table[] = { - { 0 }, - { PMU_CFC_REQACK_CFG }, /* CFC REQ/ACK connection configuration register */ - { PMU_SSP1_REQACK_CFG }, /* SSP1 REQ/ACK connection configuration register */ - { PMU_UART1TX_REQACK_CFG }, /* UART1 TX REQ/ACK connection configuration register */ - { PMU_UART1RX_REQACK_CFG }, /* UART1 RX REQ/ACK connection configuration register */ - { PMU_UART2TX_REQACK_CFG }, /* UART2 TX REQ/ACK connection configuration register */ - { PMU_UART2RX_REQACK_CFG }, /* UART2 RX REQ/ACK connection configuration register */ - { PMU_SDC_REQACK_CFG }, /* SDC REQ/ACK connection configuration register */ - { PMU_I2SAC97_REQACK_CFG }, /* I2S/AC97 REQ/ACK connection configuration register */ - { 0 }, - { 0 }, - { PMU_USB_REQACK_CFG }, /* USB 2.0 REQ/ACK connection configuration register */ - { 0 }, - { 0 }, - { PMU_EXT0_REQACK_CFG }, /* External device0 REQ/ACK connection configuration register */ - { PMU_EXT1_REQACK_CFG }, /* External device1 REQ/ACK connection configuration register */ -}; - -/* APB Bridge DMA request number re-route table */ -typedef struct _DMAD_APB_REQN_ROUTE{ - -// uint32_t apb_reqn; /* APB device req/gnt number */ - uint32_t ahb_reqn; /* AHB DMAC req/ack number */ - - uint32_t bus_sel; /* Address selection: APBBR_ADDRSEL_APB(0) or APBBR_ADDRSEL_AHB(1) */ -} DMAD_APB_REQN_ROUTE; - -/* APB Bridge DMA request number re-route table. Indexed by APB DMA req/gnt number. */ -static DMAD_APB_REQN_ROUTE dmad_apb_reqn_route_table[] = { - { 0x00, APBBR_ADDRSEL_AHB }, /* APBBR_REQN_NONE */ - { 0x01, APBBR_ADDRSEL_APB }, /* APBBR_REQN_CFC */ - { 0x02, APBBR_ADDRSEL_APB }, /* APBBR_REQN_SSP */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x05, APBBR_ADDRSEL_APB }, /* APBBR_REQN_BTUART (AHB TX reqn: 5, AHB RX reqn: 6) */ - { 0x07, APBBR_ADDRSEL_APB }, /* APBBR_REQN_SDC */ - { 0x08, APBBR_ADDRSEL_APB }, /* APBBR_REQN_I2SAC97 */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x03, APBBR_ADDRSEL_APB }, /* APBBR_REQN_STUART (AHB TX reqn: 3, AHB RX reqn: 4) */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved (comment out following fields to save code size) */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ - { 0x00, APBBR_ADDRSEL_AHB }, /* APB reserved */ -}; - -/* AHB DMA Request number */ -/* Used to record DMA request numbers in different platform */ -typedef struct _APB_DMA_REQN { - - uint32_t xc5_reqn; - uint32_t xc7_reqn; - -} APB_DMA_REQN; - -static APB_DMA_REQN apb_dma_reqn_table[] = { - - {APBBR_REQN_NONE, APBBR_REQN_NONE},//APB_REQN_NONE - /* REQN in XC5 */ - {XC5_APBBR_REQN_CFC, APBBR_REQN_RESERVED},//APB_REQN_CFC - {XC5_APBBR_REQN_SSP, APBBR_REQN_RESERVED},//APB_REQN_SSP - {XC5_APBBR_REQN_BTUART, APBBR_REQN_RESERVED},//APBBR_REQN_BTUART - {XC5_APBBR_REQN_I2SAC97, XC7_APBBR_REQN_I2SAC97},//APB_REQN_I2SAC97 - {XC5_APBBR_REQN_STUART, APBBR_REQN_RESERVED},//APB_REQN_STUART - {XC5_APBBR_REQN_I2S, APBBR_REQN_RESERVED},//APB_REQN_I2S - {XC5_APBBR_REQN_SSP2, APBBR_REQN_RESERVED},//APB_REQN_SSP2 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_EXTREQ0},//APB_REQN_EXT0 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_EXTREQ1},//APB_REQN_EXT1 - /* REQN in XC7 */ - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_SSP1TX},//APB_REQN_SSP1TX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_SSP1RX},//APB_REQN_SSP1RX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_UART2TX},//APB_REQN_UART2TX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_UART2RX},//APB_REQN_UART2RX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_UART4TX},//APB_REQN_UART4TX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_UART4RX},//APB_REQN_UART4RX - {XC5_APBBR_REQN_SDC, XC7_APBBR_REQN_SDC},//APB_REQN_SDC - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_SSP2TX},//APB_REQN_SSP2TX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_SSP2RX},//APB_REQN_SSP2RX - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_USB_2_0},//APB_REQN_USB_2_0 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_USB_1_1_EP1},//APB_REQN_USB_1_1_EP1 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_USB_1_1_EP2},//APB_REQN_USB_1_1_EP2 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_USB_1_1_EP3},//APB_REQN_USB_1_1_EP3 - {APBBR_REQN_RESERVED, XC7_APBBR_REQN_USB_1_1_EP4},//AHB_REQN_USB_1_1_EP4 - {XC5_APBBR_REQN_MAX, XC7_APBBR_REQN_MAX},//APB_REQN_MAX -}; - -/* AHB DMA Request number */ -/* Used to record DMA request numbers in different platform */ -typedef struct _AHB_DMA_REQN { - - uint32_t xc5_reqn; - uint32_t xc7_reqn; - -} AHB_DMA_REQN; - -static AHB_DMA_REQN ahb_dma_reqn_table[] = { - - {AHB_REQN_NONE, AHB_REQN_NONE},//AHB_REQN_NONE - /* REQN in XC5 */ - {XC5_AHB_REQN_CFC, AHB_REQN_RESERVED},//AHB_REQN_CFC - {XC5_AHB_REQN_SSP, AHB_REQN_RESERVED},//AHB_REQN_SSP - {XC5_AHB_REQN_UART1TX, AHB_REQN_RESERVED},//AHB_REQN_UART1TX - {XC5_AHB_REQN_UART1RX, AHB_REQN_RESERVED},//AHB_REQN_UART1RX - {XC5_AHB_REQN_I2SAC97, XC7_AHB_REQN_I2SAC97},//AHB_REQN_I2SAC97 - {XC5_AHB_REQN_USB, AHB_REQN_RESERVED},//AHB_REQN_USB - {XC5_AHB_REQN_EXT0, XC7_AHB_REQN_EXTREQ0},//AHB_REQN_EXT0 - {XC5_AHB_REQN_EXT1, XC7_AHB_REQN_EXTREQ1},//AHB_REQN_EXT1 - /* REQN in XC7 */ - {AHB_REQN_RESERVED, XC7_AHB_REQN_SSP1TX},//AHB_REQN_SSP1TX - {AHB_REQN_RESERVED, XC7_AHB_REQN_SSP1RX},//AHB_REQN_SSP1RX - {AHB_REQN_RESERVED, XC7_AHB_REQN_UART2TX},//AHB_REQN_UART2TX - {AHB_REQN_RESERVED, XC7_AHB_REQN_UART2RX},//AHB_REQN_UART2RX - {AHB_REQN_RESERVED, XC7_AHB_REQN_UART4TX},//AHB_REQN_UART4TX - {AHB_REQN_RESERVED, XC7_AHB_REQN_UART4RX},//AHB_REQN_UART4RX - {XC5_AHB_REQN_SDC, XC7_AHB_REQN_SDC},//AHB_REQN_SDC - {AHB_REQN_RESERVED, XC7_AHB_REQN_SSP2TX},//AHB_REQN_SSP2TX - {AHB_REQN_RESERVED, XC7_AHB_REQN_SSP2RX},//AHB_REQN_SSP2RX - {AHB_REQN_RESERVED, XC7_AHB_REQN_USB_2_0},//AHB_REQN_USB_2_0 - {AHB_REQN_RESERVED, XC7_AHB_REQN_USB_1_1_EP1},//AHB_REQN_USB_1_1_EP1 - {AHB_REQN_RESERVED, XC7_AHB_REQN_USB_1_1_EP2},//AHB_REQN_USB_1_1_EP2 - {AHB_REQN_RESERVED, XC7_AHB_REQN_USB_1_1_EP3},//AHB_REQN_USB_1_1_EP3 - {AHB_REQN_RESERVED, XC7_AHB_REQN_USB_1_1_EP4},//AHB_REQN_USB_1_1_EP4 -}; - -/***************************************************************************** - * FUNCTION - * - * _dmad_get_reqn - * - * DESCRIPTION - * - * Get DMA request number from various platform. - * - * INPUTS - * - * dma_controller : (in) AHB or APB - * device : (in) Device and peripheral. - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -uint32_t _dmad_get_reqn(uint32_t dma_controller, uint32_t device){ - - uint32_t reqn; - uint32_t platform_id = IN32(PMU_IDNMBR0); - - if (dma_controller == DMAD_DMAC_APB_CORE){ /* APB */ - if ((platform_id & PRODUCT_ID_MASK) == AG101P_EMERALD) - reqn = apb_dma_reqn_table[device].xc7_reqn; - else - reqn = apb_dma_reqn_table[device].xc5_reqn; - } else { /* AHB */ - if ((platform_id & PRODUCT_ID_MASK) == AG101P_EMERALD) - reqn = ahb_dma_reqn_table[device].xc7_reqn; - else - reqn = ahb_dma_reqn_table[device].xc5_reqn; - } - - return reqn; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_detach_node - * - * DESCRIPTION - * - * Detach a DRB node from a specified list. The list is acknowledged in the - * form of a head node and a tail one. - * - * INPUTS - * - * drb_pool : (in) The DRB pool of a DMA queue for a DMA channel - * head : (in/out) Pointer to the head node of the list - * tail : (in/out) Pointer to the tail node of the list - * node : (in) The node to detach from the list - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static void _dmad_detach_node(DMAD_DRB *drb_pool, uint32_t *head, uint32_t *tail, uint32_t node){ - - if (drb_pool[node].prev != 0){ - - /* prev->next = this->next (= 0, if this is a tail) */ - drb_pool[drb_pool[node].prev].next = drb_pool[node].next; - } - else { - /* this node is head, move head to next node (= 0, if this is the only one node) */ - *head = drb_pool[node].next; - } - - if (drb_pool[node].next != 0){ - - /* next->prev = this->prev (= 0, if this is a head) */ - drb_pool[drb_pool[node].next].prev = drb_pool[node].prev; - } - else { - /* this node is tail, move tail to previous node (= 0, if this is the only one node) */ - *tail = drb_pool[node].prev; - } - - drb_pool[node].prev = drb_pool[node].next = 0; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_detach_head - * - * DESCRIPTION - * - * Detach a DRB node from the head of a specified list. The list is - * acknowledged in the form of a head node and a tail one. - * - * INPUTS - * - * drb_pool : (in) The DRB pool of a DMA queue for a DMA channel - * head : (in/out) Pointer to the head node of the list - * tail : (in/out) Pointer to the tail node of the list - * drb : (out) Reference to the detached node pointer - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static void _dmad_detach_head(DMAD_DRB *drb_pool, uint32_t *head, uint32_t *tail, DMAD_DRB **drb){ - - if (*head == 0){ - - *drb = HAL_NULL; - return; - } - - *drb = &drb_pool[*head]; - - if ((*drb)->next != 0){ - - /* next->prev = this->prev (= 0, if this is a head) */ - drb_pool[(*drb)->next].prev = 0; - - /* prev->next = this->next (do nothing, if this is a head) */ - - /* head = this->next */ - *head = (*drb)->next; - } - else { - /* head = tail = 0 */ - *head = 0; - *tail = 0; - } - - /* this->prev = this->next = 0 (do nothing, if save code size) */ - (*drb)->prev = (*drb)->next = 0; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_detach_tail - * - * DESCRIPTION - * - * Detach a DRB node from the tail of a specified list. The list is - * acknowledged in the form of a head node and a tail one. - * - * INPUTS - * - * drb_pool : (in) The DRB pool of a DMA queue for a DMA channel - * head : (in/out) Pointer to the head node of the list - * tail : (in/out) Pointer to the tail node of the list - * drb : (out) Reference to the detached node pointer - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static inline void _dmad_detach_tail(DMAD_DRB *drb_pool, uint32_t *head, uint32_t *tail, DMAD_DRB **drb){ - - if (*tail == 0){ - - *drb = HAL_NULL; - return; - } - - *drb = &drb_pool[*tail]; - - if ((*drb)->prev != 0){ - - /* prev->next = this->next (= 0, if this is a tail) */ - drb_pool[(*drb)->prev].next = 0; - - /* next->prev = this->prev (do nothing, if this is a tail) */ - - /* tail = this->prev */ - *tail = (*drb)->prev; - } - else { - /* head = tail = 0 */ - *head = 0; - *tail = 0; - } - - /* this->next = this->prev = 0 (do nothing, if save code size) */ - (*drb)->prev = (*drb)->next = 0; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_attach_head - * - * DESCRIPTION - * - * Attach a DRB node to the head of a specified list. The list is - * acknowledged in the form of a head node and a tail one. - * - * INPUTS - * - * drb_pool : (in) The DRB pool of a DMA queue for a DMA channel - * head : (in/out) Pointer to the head node of the list - * tail : (in/out) Pointer to the tail node of the list - * drb : (in) The node number of the node to attach - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static inline void _dmad_attach_head(DMAD_DRB *drb_pool, uint32_t *head, uint32_t *tail, uint32_t node){ - - if (*head != 0){ - - drb_pool[*head].prev = node; /* head->prev = this */ - drb_pool[node].next = *head; /* this->next = head */ - drb_pool[node].prev = 0; /* this->prev = 0 */ - *head = node; /* head = node */ - } - else { - *head = *tail = node; /* head = tail = node */ - drb_pool[node].prev = drb_pool[node].next = 0; - } -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_attach_tail - * - * DESCRIPTION - * - * Attach a DRB node to the tail of a specified list. The list is - * acknowledged in the form of a head node and a tail one. - * - * INPUTS - * - * drb_pool : (in) The DRB pool of a DMA queue for a DMA channel - * head : (in/out) Pointer to the head node of the list - * tail : (in/out) Pointer to the tail node of the list - * drb : (in) The node number of the node to attach - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static void _dmad_attach_tail(DMAD_DRB *drb_pool, uint32_t *head, uint32_t *tail, uint32_t node){ - - if (*tail != 0){ - - drb_pool[*tail].next = node; /* tail->next = this */ - drb_pool[node].prev = *tail; /* this->prev = tail */ - drb_pool[node].next = 0; /* this->next = 0 */ - *tail = node; /* tail = node */ - } - else { - *head = *tail = node; /* head = tail = node */ - drb_pool[node].prev = drb_pool[node].next = 0; - } -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_ahb_lisr - * - * DESCRIPTION - * - * This is the ISR that services all AHB DMA channels on the NDS32 - * Integrator. - * - * NOTE - * Currently this ISR processes one channel at a time. This replies the - * assumption that the ISR will be invoked again as long as it's status - * bit remains not-cleared, if interrupts for multiple channels happens - * simultaneously. - * - * [todo] Above assumption may not be the real world case. Check it and - * implement processing of multiple channels at once in the ISR, if - * necessary. - * - * INPUTS - * - * vector : Interrupt vector number - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static void _dmad_ahb_lisr(int vector){ - - DMAD_DRQ *drq; - DMAD_DRB *drb; - uint32_t channel; /* interrupt channel number */ - uint8_t tc_int = 0; /* interrupt reason is terminal count */ - uint8_t err_int = 0; /* interrupt reason is DMA error */ - //uint8_t abt_int = 0; /* interrupt reason is abort DMA transfer of this channel */ - uint32_t prv_msk = 0; - - if (vector != INTC_DMA_BIT) - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - - - prv_msk = hal_intc_irq_mask(IRQ_DMA_VECTOR); - /* Check DMA status register to get channel number */ - for (channel = 0; channel < DMAD_AHB_MAX_CHANNELS; ++channel){ - - if (GETB32(DMAC_INT_TC, channel)){ - - tc_int = 1; /* Mark as TC int */ - SETB32(DMAC_INT_TC_CLR, channel); /* DMAC INT TC status clear */ - hal_intc_irq_clean(IRQ_DMA_VECTOR); - break; - } - } - - /* Perform DMA error checking if no valid channel was found who assert the TC signal. */ - if (channel == DMAD_AHB_MAX_CHANNELS){ - - for (channel = 0; channel < DMAD_AHB_MAX_CHANNELS; ++channel){ - - if (GETB32(DMAC_INT_ERRABT, channel + DMAC_INT_ERR_SHIFT)){ - - err_int = 1; /* Mark as ERR int */ - SETB32(DMAC_INT_ERRABT_CLR, channel + DMAC_INT_ERR_CLR_SHIFT); /* DMAC INT ERR status clear */ - hal_intc_irq_clean(IRQ_DMA_VECTOR); - break; - } - } - - if (channel == DMAD_AHB_MAX_CHANNELS){ - - for (channel = 0; channel < DMAD_AHB_MAX_CHANNELS; ++channel){ - - if (GETB32(DMAC_INT_ERRABT, channel + DMAC_INT_ABT_SHIFT)){ - - //abt_int = 1; /* Mark as ABT int */ - SETB32(DMAC_INT_ERRABT_CLR, channel + DMAC_INT_ABT_CLR_SHIFT); /* DMAC INT ABT status clear */ - hal_intc_irq_clean(IRQ_DMA_VECTOR); - break; - } - } - - if (channel == DMAD_AHB_MAX_CHANNELS){ - - /* Unknown reason ... (check why) */ - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); /*return; */ - } - } - } - - /* Lookup channel's DRQ (DMA Request Queue) */ - drq = (DMAD_DRQ *)&ahb_drq_pool[channel]; - - /* DMAC */ - /* Stop DMA channel temporarily */ - CLRB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - - /* - * Lookup/detach latest submitted DRB (DMA Request Block) from - * the DRQ (DMA Request Queue), so ISR could kick off next DRB - */ - _dmad_detach_head(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, &drb); - if (drb == HAL_NULL){ - - /* Check why DMA is triggered while submitted list is empty. */ - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); /*return; */ - } - - /* Enable nested interrupt */ - GIE_ENABLE(); - - /* Notify that new node is going to be available in the free list */ - if (drb->completion_sem != HAL_NULL){ - - dmad.hisr_as |= (1 << channel); /* [15:0] AHB channel indicator */ - hal_raise_bh(&dmad.hisr); /* Call HISR to complete deferred tasks */ - } - /* Process DRBs according to interrupt reason */ - if (tc_int){ - - /* Mark DRB state as completed */ - drb->state = DMAD_DRB_STATE_COMPLETED; - - /* destination is memory */ - if (drq->dc_invalidate != HAL_NULL && drb->dst_index == DMAC_REQN_NONE) - drq->dc_invalidate((unsigned long)(drb->dst_addr), - (unsigned long)(drb->dst_addr) + (unsigned long)(drb->transfer_size)); - - _dmad_attach_tail(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, drb->node); - - /* Check whether there are pending requests in the DRQ */ - if (drq->sbt_head != 0){ - - drb = &drq->drb_pool[drq->sbt_head]; /* Lookup next DRB (DMA Request Block) */ - - /* pre-submission-programming */ - if (drb->psp) - drb->psp(drb->data); - - /* Kick-off DMA for next DRB */ - /* - Source and destination address */ - OUT32(drq->channel_base + DMAC_SRC_ADDR_OFFSET, drb->src_addr); - OUT32(drq->channel_base + DMAC_DST_ADDR_OFFSET, drb->dst_addr); - - /* - Transfer size (in units of source width) */ - OUT32(drq->channel_base + DMAC_SIZE_OFFSET, drb->req_size); - - /* - Re-enable DMA channel */ - SETB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - } - } - else if (err_int){ - - /* Mark DRB state as error */ - drb->state = DMAD_DRB_STATE_ERROR; - - _dmad_attach_tail(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, drb->node); - - /* Check whether there are pending requests in the DRQ */ - if (drq->sbt_head != 0){ - - /* Lookup next DRB (DMA Request Block) */ - drb = &drq->drb_pool[drq->sbt_head]; - - /* pre-submission-programming */ - if (drb->psp) - drb->psp(drb->data); - - /* - * Kick-off DMA for next DRB - */ - - /* Source and destination address */ - OUT32(drq->channel_base + DMAC_SRC_ADDR_OFFSET, drb->src_addr); - OUT32(drq->channel_base + DMAC_DST_ADDR_OFFSET, drb->dst_addr); - - /* Transfer size (in units of source width) */ - OUT32(drq->channel_base + DMAC_SIZE_OFFSET, drb->req_size); - - /* Re-enable DMA channel */ - SETB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - } - } - else { /* abt_int */ - - /* Remove all pending requests in the queue */ - while (1){ - - /* Mark DRB state as abort */ - drb->state = DMAD_DRB_STATE_ABORT; - - _dmad_attach_tail(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, drb->node); - - /* Detach next submitted DRB (DMA Request Block) from the DRQ (DMA Request Queue) */ - _dmad_detach_head(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, &drb); - if (drb == HAL_NULL) - break; - } - } - -#ifdef DMAD_POLLING - if (dmad.hisr_as & 0x0000ffff){ - - while (drq->cpl_head != 0){ - - _dmad_detach_head(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, &drb); - _dmad_attach_tail(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb->node); - - /* completion-of-submission-programming */ - if (drb->rcp) - drb->rcp(drb->data); - } - } -#endif - GIE_DISABLE(); - - hal_intc_irq_unmask(prv_msk); - -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_apb_lisr - * - * DESCRIPTION - * - * This is the ISR that services all APB DMA channels on the NDS32 - * Integrator. - * - * NOTE - * Currently this ISR processes one channel at a time. This replies the - * assumption that the ISR will be invoked again as long as it's status - * bit remains not-cleared, if interrupts for multiple channels happens - * simultaneously. - * - * [todo] Above assumption may not be the real world case. Check it and - * implement processing of multiple channels at once in the ISR, if - * necessary. - * - * INPUTS - * - * vector : Interrupt vector number - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static void _dmad_apb_lisr(int vector){ - - DMAD_DRQ *drq; - DMAD_DRB *drb; - uint32_t channel; /* interrupt channel number */ - uint8_t finish_int = 0; /* interrupt reason is transfer completed */ - uint8_t err_int = 0; /* interrupt reason is DMA error */ - - uint32_t prv_msk = 0; - if (vector != INTC_APB_BIT) - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - - /* Mask priority <= apb_bridge's interrupt */ - prv_msk = hal_intc_irq_mask(IRQ_APBBRIDGE_VECTOR); - - /* Check DMA status register to get channel number & clean pending */ - for (channel = 0; channel < DMAD_APB_MAX_CHANNELS; ++channel){ - - uint32_t channel_base = APBBR_DMA_BASE_CH(channel); - - if (GETB32(channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_FINTST_BIT)){ - - /* Mark as finish int */ - finish_int = 1; - - /* APB DMA finish int status clear */ - CLRB32(channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_FINTST_BIT); - hal_intc_irq_clean(IRQ_APBBRIDGE_VECTOR); - break; - } - } - - /* Perform DMA error checking if no valid channel was found who assert the finish signal - * & clean pending - */ - if (channel == DMAD_APB_MAX_CHANNELS){ - - for (channel = 0; channel < DMAD_APB_MAX_CHANNELS; ++channel){ - - uint32_t channel_base = APBBR_DMA_BASE_CH(channel); - - if (GETB32(channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_ERRINTST_BIT)){ - - /* Mark as error int */ - err_int = 1; - - /* APB DMA error int status clear */ - CLRB32(channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_ERRINTST_BIT); - hal_intc_irq_clean(IRQ_APBBRIDGE_VECTOR); - break; - } - } - - if (channel == DMAD_AHB_MAX_CHANNELS) - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - } - - /* Lookup channel's DRQ (DMA Request Queue) */ - drq = (DMAD_DRQ *)&apb_drq_pool[channel]; - - /* - * APB - */ - - /* Stop DMA channel temporarily */ - CLRB32(drq->channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_CHEN_BIT); - - /* - * Lookup/detach latest submitted DRB (DMA Request Block) from - * the DRQ (DMA Request Queue), so ISR could kick off next DRB - */ - _dmad_detach_head(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, &drb); - if (drb == HAL_NULL){ - - /* Check why DMA is triggered while submitted list is empty. */ - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - } - - GIE_ENABLE(); - - /* Notify that new node is going to be available in the free list */ - dmad.hisr_as |= (0x00010000 << channel); /* [31:16] APB channel indicator */ - hal_raise_bh(&dmad.hisr); /* Call HISR to complete deferred tasks */ - - /* Process DRBs according to the cause of this interrupt */ - if (finish_int){ - - /* Mark DRB state as completed */ - drb->state = DMAD_DRB_STATE_COMPLETED; - - _dmad_attach_tail(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, drb->node); - - /* destination is memory */ - if (drq->dc_invalidate != HAL_NULL && drb->dst_index == DMAC_REQN_NONE) - drq->dc_invalidate((unsigned long)(drb->dst_addr), - (unsigned long)(drb->dst_addr) + (unsigned long)(drb->transfer_size)); - - /* Check whether there are pending requests in the DRQ */ - if (drq->sbt_head != 0){ - - /* Lookup next DRB (DMA Request Block) */ - drb = &drq->drb_pool[drq->sbt_head]; - - /* pre-submission-programming */ - if (drb->psp) - drb->psp(drb->data); - - /* - * Kick-off DMA for next DRB - */ - - /* Source and destination address */ - OUT32(drq->channel_base + APBBR_DMA_SAD_OFFSET, drb->src_addr); - OUT32(drq->channel_base + APBBR_DMA_DAD_OFFSET, drb->dst_addr); - - /* - Transfer size (in units of source width) */ - OUT32(drq->channel_base + APBBR_DMA_CYC_OFFSET, drb->req_size & APBBR_DMA_CYC_MASK); - - /* - Re-enable DMA channel */ - SETB32(drq->channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_CHEN_BIT); - } - } - else if (err_int){ - - /* Remove all pending requests in the queue */ - while (1){ - - /* Mark DRB state as abort */ - drb->state = DMAD_DRB_STATE_ABORT; - - _dmad_attach_tail(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, drb->node); - _dmad_detach_head(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, &drb); - - if (drb == HAL_NULL) - break; - } - } - -#ifdef DMAD_POLLING - if (dmad.hisr_as & 0xffff0000){ - - while (drq->cpl_head != 0){ - - _dmad_detach_head(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, &drb); - _dmad_attach_tail(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb->node); - - /* completion-of-submission-programming */ - if (drb->rcp) - drb->rcp(drb->data); - } - - dmad.hisr_as &= ~(0x00010000 << channel); - } -#endif - GIE_DISABLE(); - hal_intc_irq_unmask(prv_msk); - -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_hisr - * - * DESCRIPTION - * - * This HISR performs the defferred tasks from LISR. - * - * NOTE - * - * Current task list of this HISR - * - * - Signal DRQ available event for waiting DRQ allocations. - * - * INPUTS - * - * vector : Interrupt vector number - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -static inline void _dmad_hisr(void *param){ - - DMAD_DRQ *drq; - DMAD_DRB *drb = NULL; - //uint32_t core_intl; - uint32_t channel; - - while(1){ - - hal_bh_t *bh = (hal_bh_t *)param; - hal_pend_semaphore(&bh->sem, HAL_SUSPEND); - - //core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Signal free-list available event */ - if ((dmad.hisr_as & 0xffff0000) != 0){ - - /* Disable apb_bridge interrupt to avoid race condition */ - HAL_INTC_IRQ_ATOMIC_DISABLE(IRQ_APBBRIDGE_VECTOR); - /* APB LISR */ - for (channel = 0; channel < DMAD_APB_MAX_CHANNELS; ++channel){ - - if (dmad.hisr_as & (0x00010000 << channel)){ - - drq = (DMAD_DRQ *)&apb_drq_pool[channel]; - - while (drq->cpl_head != 0){ - - _dmad_detach_head(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, &drb); - _dmad_attach_tail(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb->node); - - hal_post_semaphore(&drq->drb_sem); - - /* completion-of-submission-programming */ - if (drb->rcp) - drb->rcp(drb->data); - - if(drb->completion_sem != HAL_NULL) - { -// puts("APB DMA HISR Complete!!!\r\n"); - hal_post_semaphore(drb->completion_sem); - - } - } - - dmad.hisr_as &= ~(0x00010000 << channel); - } - } - /* Re-enable apb_bridge interrupt */ - HAL_INTC_IRQ_ATOMIC_ENABLE(IRQ_APBBRIDGE_VECTOR); - } - else if ((dmad.hisr_as & 0x0000ffff) != 0){ - /* Disable AHB_DMA interrupt to avoid race condition */ - HAL_INTC_IRQ_ATOMIC_DISABLE(IRQ_DMA_VECTOR); - - /* AHB LISR */ - for (channel = 0; channel < DMAD_AHB_MAX_CHANNELS; ++channel){ - - if (dmad.hisr_as & (1 << channel)){ - - drq = (DMAD_DRQ *)&ahb_drq_pool[channel]; - - while (drq->cpl_head != 0){ - - _dmad_detach_head(drq->drb_pool, &drq->cpl_head, &drq->cpl_tail, &drb); - _dmad_attach_tail(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb->node); - - hal_post_semaphore(&drq->drb_sem); - - /* completion-of-submission-programming */ - if (drb->rcp) - drb->rcp(drb->data); - } - - if (drb->completion_sem != HAL_NULL) - hal_post_semaphore(drb->completion_sem); - - dmad.hisr_as &= ~(1 << channel); - } - } - HAL_INTC_IRQ_ATOMIC_ENABLE(IRQ_DMA_VECTOR); - } - - // hal_global_int_ctl(core_intl); - } -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_channel_alloc - * - * DESCRIPTION - * - * This function allocates a DMA channel for client's request. If the - * channel is already used by other clients, then this function will - * fail the allocation. - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * init : Specify whether to initialize the DMA channel HW if the - * allocation is successfull. Clients could also postpone - * the initialization task to the _dmad_channel_init() - * routine. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful allocation, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_channel_alloc(DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t init){ - - uint32_t status; - DMAD_DRQ *drq_iter; - DMAD_DRB *drb_iter; - uint32_t i = 0; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - if (ch_req->controller == DMAD_DMAC_AHB_CORE) - drq_iter = ahb_drq_pool; - else if (ch_req->controller == DMAD_DMAC_APB_CORE) - drq_iter = apb_drq_pool; - else - return HAL_ERR_NOT_PRESENT; - - /* First-time initialization for DMA queue pool access control object */ - if (dmad.drq_pool_mutex_init == 0){ - - status = hal_create_mutex(&dmad.drq_pool_mutex, "drqpool"); - if (status != HAL_SUCCESS){ - - DMAD_TRACE(("[dmad] failed to create drq_pool mutex!\r\n")); - return status; - } - dmad.drq_pool_mutex_init = 1; - } - - /* Obtain exclusive access to the pool of channel queues */ - - if (hal_current() != HAL_NULL){ - - /* Suspending is only valid to the current task -- no need to lock if invoked from HISR. */ - status = hal_wait_for_mutex(&dmad.drq_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS){ - - DMAD_TRACE(("[dmad] failed to lock drq_pool! status(0x%08lx)\r\n", status)); - return status; - } - } - - /* Locate an available DMA channel */ - if (ch_req->controller == DMAD_DMAC_AHB_CORE){ - -#if 0 - /* UART - TX/RX channel is limitted */ - if ((ch_req->ahbch_req.src_index == DMAC_REQN_UART1TX) || - (ch_req->ahbch_req.dst_index == DMAC_REQN_UART1TX) || - (ch_req->ahbch_req.src_index == DMAC_REQN_UART2TX) || - (ch_req->ahbch_req.dst_index == DMAC_REQN_UART2TX)) - { - /* TX channel is limitied to C/D */ - drq_iter = &ahb_drq_pool[2]; - for (i = 2; i < 4; ++i, ++drq_iter){ - if (drq_iter->allocated == 0) - break; - } - } - else if ((ch_req->ahbch_req.src_index == DMAC_REQN_UART1RX) || - (ch_req->ahbch_req.dst_index == DMAC_REQN_UART1RX) || - (ch_req->ahbch_req.src_index == DMAC_REQN_UART2RX) || - (ch_req->ahbch_req.dst_index == DMAC_REQN_UART2RX)){ - - /* RX channel is limitied to A/B */ - for (i = 0; i < 2; ++i, ++drq_iter){ - - if (drq_iter->allocated == 0) - break; - } - } - else -#endif - { - if ((ch_req->ahbch_req.src_index != DMAC_REQN_NONE) || - (ch_req->ahbch_req.dst_index != DMAC_REQN_NONE)){ - - /* - * [2007-12-03] It looks current board have problem to do dma - * traffic for APB devices on DMAC channel 0/1. Redirect all - * APB devices to start from channel 2. - * [todo] include USB controller ? - */ - drq_iter = &ahb_drq_pool[2]; - for (i = 2; i < DMAD_AHB_MAX_CHANNELS; ++i, ++drq_iter){ - - if (drq_iter->allocated == 0) - break; - } - } - else { - /* channel for other devices is free to allocate */ - for (i = 0; i < DMAD_AHB_MAX_CHANNELS; ++i, ++drq_iter){ - - if (drq_iter->allocated == 0) - break; - } - } - } - - if (i == DMAD_AHB_MAX_CHANNELS){ - - DMAD_TRACE(("out of available channels (AHB DMAC)!\r\n")); - return HAL_ERR_UNAVAILABLE; - } - - DMAD_TRACE(("allocated channel: %d (AHB DMAC)\r\n")); - } - else if (ch_req->controller == DMAD_DMAC_APB_CORE){ - - for (i = 0; i < DMAD_APB_MAX_CHANNELS; ++i, ++drq_iter){ - - if (drq_iter->allocated == 0) - break; - } - - if (i == DMAD_APB_MAX_CHANNELS){ - - DMAD_TRACE(("out of available channels (APB DMAC)!\r\n")); - return HAL_ERR_UNAVAILABLE; - } - - DMAD_TRACE(("allocated channel: %d (APB DMAC)\r\n", i)); - } - - /* Allocate the DMA channel */ - drq_iter->allocated = 1; - - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Release exclusive access to the pool of channel queues - */ - status = hal_release_mutex(&dmad.drq_pool_mutex); - if (status != HAL_SUCCESS){ - - DMAD_TRACE(("[dmad] failed to unlock drq_pool!\r\n")); - return status; - } - } - - /* Create mutex object for DMA queue access control */ - status = hal_create_mutex(&drq_iter->drb_pool_mutex, "drq"); - if (status != HAL_SUCCESS){ - - DEBUG(1, 1, "failed to create mutex for drb_pool!\n"); - return status; - } - - /* Create semaphores for free-list allocation operation */ - status = hal_create_semaphore(&drq_iter->drb_sem, DMAD_DRB_POOL_SIZE - 1, (void*)0); - if (status != HAL_SUCCESS){ - - DEBUG(1, 1, "failed to create semaphores for drb_pool!\n"); - return status; - } - - /* Record the channel number in client's struct */ - ch_req->channel = i; - - /* Record the channel's queue handle in client's struct */ - ch_req->drq = drq_iter; - - if (ch_req->controller == DMAD_DMAC_AHB_CORE){ - - //drq_iter->controller_base = DMAC_BASE; - drq_iter->channel_base = DMAC_BASE_CH(i); - } - else { - //drq_iter->controller_base = APBBR_BASE; - drq_iter->channel_base = APBBR_DMA_BASE_CH(i); - } - - /* Initialize DMA channel's DRB pool as list of free DRBs */ - drb_iter = &drq_iter->drb_pool[0]; - drb_iter->prev = 0; - drb_iter->next = 0; - drb_iter->node = 0; - //drb_iter->src_addr = 0; - //drb_iter->dst_addr = 0; - //drb_iter->req_size = 0; - ++drb_iter; - - for (i = 1; i < DMAD_DRB_POOL_SIZE; ++i, ++drb_iter){ - - drb_iter->prev = i - 1; - drb_iter->next = i + 1; - drb_iter->node = i; - //drb_iter->src_addr = 0; - //drb_iter->dst_addr = 0; - //drb_iter->req_size = 0; - } - drq_iter->drb_pool[DMAD_DRB_POOL_SIZE - 1].next = 0; - - /* Initialize DMA channel's DRB free-list, ready-list, and submitted-list */ - drq_iter->fre_head = 1; - drq_iter->fre_tail = DMAD_DRB_POOL_SIZE - 1; - drq_iter->rdy_head = drq_iter->rdy_tail = 0; - drq_iter->sbt_head = drq_iter->sbt_tail = 0; - drq_iter->cpl_head = drq_iter->cpl_tail = 0; - - /* Initialize the channel */ - if (init) - _dmad_channel_init(ch_req); - - /* Initialize cache writeback function */ -#ifndef CONFIG_CPU_DCACHE_ENABLE - drq_iter->dc_writeback = HAL_NULL; - drq_iter->dc_invalidate = HAL_NULL; -#else - drq_iter->dc_writeback = nds32_dma_flush_range; - drq_iter->dc_invalidate = nds32_dma_inv_range; -#endif - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_channel_free - * - * DESCRIPTION - * - * This function frees a DMA channel for future clients' request. - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful channel free, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_channel_free(const DMAD_CHANNEL_REQUEST_DESC *ch_req){ - - uint32_t status; - DMAD_DRQ *drq; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - if (drq->allocated == 0) - return HAL_ERR_INVALID_POINTER; - - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Obtain exclusive access to the pool of channel queues - */ - status = hal_wait_for_mutex(&dmad.drq_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS) - return status; - } - - /* Todo: Stop/abort channel I/O if it's busy ? */ - - /* Delete mutex object of DMA queue access control */ - status = hal_destroy_mutex(&drq->drb_pool_mutex); - if (status != HAL_SUCCESS) - return status; - - /* Delete semaphores of free-list allocation operation */ - status = hal_destroy_semaphore(&drq->drb_sem); - if (status != HAL_SUCCESS) - return status; - - /* Reset HISR activation state */ - if (ch_req->controller == DMAD_DMAC_AHB_CORE) - dmad.hisr_as &= ~(1 << ch_req->channel); - else - dmad.hisr_as &= ~(1 << (ch_req->channel + 16)); - - /* Set released flag. */ - drq->allocated = 0; - - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Release exclusive access to the pool of channel queues - */ - status = hal_release_mutex(&dmad.drq_pool_mutex); - if (status != HAL_SUCCESS) - return status; - } - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_ahb_init - * - * DESCRIPTION - * - * This function performs the AHB DMAC channel initialization. - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _dmad_ahb_init(const DMAD_CHANNEL_REQUEST_DESC *ch_req){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq = (DMAD_DRQ *)ch_req->drq; - DMAD_AHBCH_REQUEST *ahb_req = (DMAD_AHBCH_REQUEST *)(&ch_req->ahbch_req); - uint32_t channel = (uint32_t)ch_req->channel; - uint32_t channel_base = drq->channel_base; - uint32_t core_intl; - - /* Register LISR */ - if (dmad.ahb_lisr_registered == 0){ - status = hal_register_isr(IRQ_DMA_VECTOR, _dmad_ahb_lisr, (void*)0); - // status = hal_register_isr(INTC_DMA_BIT, _dmad_ahb_lisr, (void*)0); - - if (status != HAL_SUCCESS) - return status; - - dmad.ahb_lisr_registered = 1; - } - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Following code require _safe_exit return path */ - - /* INTC */ - /* Disable DMAC interrupt */ - hal_intc_irq_disable(IRQ_DMA_VECTOR); - - /* Clear DMAC interrupt status */ - hal_intc_irq_clean(IRQ_DMA_VECTOR); - - /* Setup DMAC interrupt trigger mode - level trigger */ - /* Setup DMAC interrupt trigger level - assert high */ - hal_intc_irq_config(IRQ_DMA_VECTOR, IRQ_LEVEL_TRIGGER, IRQ_ACTIVE_HIGH); - - /* Enable DMAC interrupt */ - hal_intc_irq_enable(IRQ_DMA_VECTOR); - -#if 0 -#if ( NO_EXTERNAL_INT_CTL == 1 ) - /* - * IVIC without INTC - */ - /* FIXME add trigger mode */ - /* Enable DMAC interupt */ - SR_SETB32(NDS32_SR_INT_MASK2,IRQ_DMA_VECTOR); - - -#else - /* - * INTC - */ - - /* Clear DMAC interrupt status */ - SETB32(INTC_HW1_CLR, INTC_DMA_BIT); - - /* Setup DMAC interrupt trigger mode - level trigger */ - CLRB32(INTC_HW1_TMR, INTC_DMA_BIT); - - /* Setup DMAC interrupt trigger level - assert high */ - CLRB32(INTC_HW1_TLR, INTC_DMA_BIT); - - /* Enable DMAC interrupt */ - SETB32(INTC_HW1_ER, INTC_DMA_BIT); -#endif -#endif - - /* - * PMU - */ - - /* - * Route APB device DMA to an AHB DMAC channel and specify the channel - * number. (connection status could be read back from PMU_AHBDMA_REQACK - * register) - * Note: Only one device is routed per AHB DMA channel, the other target - * should be either (1) the same device (same reqn), or (2) the AHB - * device (reqn = 0). - */ - if (ahb_req->dst_index != PMU_REQN_NONE){ - - /* DMA transfer to device */ - if ((ahb_req->dst_index > PMU_REQN_EXT1) || - (dmad_ahb_ch_route_table[ahb_req->dst_index].route_cr == 0)){ - - status = HAL_ERR_NOT_PRESENT; - goto _safe_exit; - } - - OUT32(dmad_ahb_ch_route_table[ahb_req->dst_index].route_cr, - PMU_DMACUSED_MASK | ((ahb_req->dst_reqn << PMU_CHANNEL_SHIFT) & PMU_CHANNEL_MASK)); - } - else if (ahb_req->src_index != PMU_REQN_NONE){ - - /* DMA transfer from device */ - if ((ahb_req->src_index > PMU_REQN_EXT1) || - (dmad_ahb_ch_route_table[ahb_req->src_index].route_cr == 0)){ - - status = HAL_ERR_NOT_PRESENT; - goto _safe_exit; - } - - OUT32(dmad_ahb_ch_route_table[ahb_req->src_index].route_cr, - PMU_DMACUSED_MASK | ((ahb_req->src_reqn << PMU_CHANNEL_SHIFT) & PMU_CHANNEL_MASK)); - } - - - /* - * DMAC (Controller Setting) - * Note: Controller global setting actually should not placed in this channel - * specific setup routine. However, currently the only global setting - * is a fixed value, so it is ok to set it here. In this way, we save - * the effert to setup the global parameters elsewhere. - */ - - /* INT TC/ERR/ABT status clear */ - SETB32(DMAC_INT_TC_CLR, channel); /* TC clear */ - SETB32(DMAC_INT_ERRABT_CLR, channel + DMAC_INT_ERR_CLR_SHIFT); /* ERR clear */ - SETB32(DMAC_INT_ERRABT_CLR, channel + DMAC_INT_ABT_CLR_SHIFT); /* ABT clear */ - - /* CSR (enable DMAC, set M0 & M1 endian default to little endian transfer) */ - OUT32(DMAC_CSR, DMAC_DMACEN_MASK | - ((DMAC_ENDIAN_LITTLE << DMAC_M0ENDIAN_BIT) & DMAC_M0ENDIAN_MASK) | - ((DMAC_ENDIAN_LITTLE << DMAC_M1ENDIAN_BIT) & DMAC_M1ENDIAN_MASK)); - - /* DMAC (Channel-Specific Setting) */ - /* SYNC */ - if (ahb_req->sync) - SETB32(DMAC_SYNC, channel); - else - CLRB32(DMAC_SYNC, channel); - - /* - * Channel CSR - * CH_EN : 0 (disable) - * DST_SEL : 0 (Master 0) - * SRC_SEL : 0 (Master 0) - * DSTAD_CTL : ahb_req->dst_addr_ctrl - * SRCAD_CTL : ahb_req->src_addr_ctrl - * MODE : 0 (normal) - * DST_WIDTH : ahb_req->dst_width - * SRC_WIDTH : ahb_req->src_width - * ABT : 0 (not abort) - * SRC_SIZE : 0 (burst size = 1 byte) - * PROT1 : 0 (user mode) - * PROT2 : 0 (bot bufferable) - * PROT3 : 0 (not cacheable) - * CHPRI : ahb_req->priority - * DMA_FF_TH : 0 (FIA320 only, threshold = 1) - * TC_MSK : 0 (TC counter status enable) - */ - OUT32(channel_base + DMAC_CSR_OFFSET, - ((ahb_req->src_width << DMAC_CSR_SRC_WIDTH_SHIFT) & DMAC_CSR_SRC_WIDTH_MASK) | - ((ahb_req->src_addr_ctrl << DMAC_CSR_SRCAD_CTL_SHIFT) & DMAC_CSR_SRCAD_CTL_MASK) | - ((ahb_req->dst_width << DMAC_CSR_DST_WIDTH_SHIFT) & DMAC_CSR_DST_WIDTH_MASK) | - ((ahb_req->dst_addr_ctrl << DMAC_CSR_DSTAD_CTL_SHIFT) & DMAC_CSR_DSTAD_CTL_MASK) | - ((ahb_req->priority << DMAC_CSR_CHPRI_SHIFT) & DMAC_CSR_CHPRI_MASK)); - - /* Channel CFG - * INT_TC_MSK : 0 (enable TC int) - * INT_ERR_MSK : 0 (enable ERR int) - * INT_ABT_MSK : 0 (enable ABT int) - * SRC_RS : 0 - * SRC_HE : 0 - * BUSY : r/o - * DST_RS : 0 - * DST_HE : 0 - * LLP_CNT : r/o - */ - OUT32(channel_base + DMAC_CFG_OFFSET, 0); - /*(DMAC_CFG_INT_TC_MSK | DMAC_CFG_INT_ERR_MSK | DMAC_CFG_INT_ABT_MSK)); */ - -#if 1 /* (Not found in AG101 spec -- has removed this setting?) */ - /* - HW handshake mode: CSR & CFG */ - if (ahb_req->hw_handshake != 0){ - - /* Channel CFG - Device REQN and HW-handshake mode */ - uint32_t cfg = IN32(channel_base + DMAC_CFG_OFFSET); - - if (ahb_req->src_index != DMAC_REQN_NONE){ - - OUT32(channel_base + DMAC_CFG_OFFSET, cfg | - ((ahb_req->src_reqn << DMAC_CFG_INT_SRC_RS_SHIFT) & DMAC_CFG_INT_SRC_RS_MASK) | - ((1 << DMAC_CFG_INT_SRC_HE_BIT) & DMAC_CFG_INT_SRC_HE_MASK) | - ((0 << DMAC_CFG_INT_DST_RS_SHIFT) & DMAC_CFG_INT_DST_RS_MASK) | - ((0 << DMAC_CFG_INT_DST_HE_BIT) & DMAC_CFG_INT_DST_HE_MASK)); - } - else { - OUT32(channel_base + DMAC_CFG_OFFSET, cfg | - ((0 << DMAC_CFG_INT_SRC_RS_SHIFT) & DMAC_CFG_INT_SRC_RS_MASK) | - ((0 << DMAC_CFG_INT_SRC_HE_BIT) & DMAC_CFG_INT_SRC_HE_MASK) | - ((ahb_req->dst_reqn << DMAC_CFG_INT_DST_RS_SHIFT) & DMAC_CFG_INT_DST_RS_MASK) | - ((1 << DMAC_CFG_INT_DST_HE_BIT) & DMAC_CFG_INT_DST_HE_MASK)); - } - - /* Channel CSR - Enable HW-handshake mode */ - SETB32(channel_base + DMAC_CSR_OFFSET, DMAC_CSR_MODE_BIT); - } -#endif - /* SRC_ADDR and DST_ADDR - not now */ - - /* LLP */ - OUT32(channel_base + DMAC_LLP_OFFSET, 0); - - /* TOT_SIZE - not now */ - -_safe_exit: - hal_global_int_ctl(core_intl); - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_apb_init - * - * DESCRIPTION - * - * This function performs the APB bridge DMA channel initialization. - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _dmad_apb_init(const DMAD_CHANNEL_REQUEST_DESC *ch_req){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq = (DMAD_DRQ *)ch_req->drq; - DMAD_APBCH_REQUEST *apb_req = (DMAD_APBCH_REQUEST *)(&ch_req->apbch_req); - uint32_t channel = (uint32_t)ch_req->channel; - uint32_t channel_base = drq->channel_base; - uint32_t channel_cmd = 0; - uint32_t core_intl; - uint32_t dst_bus_sel; - uint32_t src_bus_sel; - - /* Register LISR */ - if (dmad.apb_lisr_registered == 0){ - status = hal_register_isr(IRQ_APBBRIDGE_VECTOR , _dmad_apb_lisr, (void*)0); - - if (status != HAL_SUCCESS) - return status; - - dmad.apb_lisr_registered = 1; - } - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Following code require _safe_exit return path */ - - /* INTC */ - /* Disable APB Bridge interrupt */ - hal_intc_irq_disable(IRQ_APBBRIDGE_VECTOR); - - /* Clear APB Bridge interrupt status */ - hal_intc_irq_clean(IRQ_APBBRIDGE_VECTOR); - - /* Setup APB Bridge interrupt trigger mode - level trigger */ - /* Setup APB Bridge interrupt trigger level - assert high */ - hal_intc_irq_config(IRQ_APBBRIDGE_VECTOR, IRQ_LEVEL_TRIGGER, IRQ_ACTIVE_HIGH); - - /* Enable APB Bridge interrupt */ - hal_intc_irq_enable(IRQ_APBBRIDGE_VECTOR); - -#if 0 -#if ( NO_EXTERNAL_INT_CTL == 1 ) - /* - * IVIC without INTC - */ - /* FIXME add trigger mode */ - /* Enable APB Bridge interrupt */ - SR_SETB32(NDS32_SR_INT_MASK2,IRQ_APBBRIDGE_VECTOR); -#else - /* - * INTC - */ - - /* Clear APB Bridge interrupt status */ - SETB32(INTC_HW1_CLR, INTC_APB_BIT); - - /* Setup APB Bridge interrupt trigger mode - level trigger */ - CLRB32(INTC_HW1_TMR, INTC_APB_BIT); - - /* Setup APB Bridge interrupt trigger level - assert high */ - CLRB32(INTC_HW1_TLR, INTC_APB_BIT); - - /* Enable APB Bridge interrupt */ - SETB32(INTC_HW1_ER, INTC_APB_BIT); -#endif -#endif - /* PMU */ - - /* Check platform version */ - uint32_t max_reqn = _dmad_get_reqn(DMAD_DMAC_APB_CORE, APB_MAX); - - /* - * Undo APB device DMA to AHB DMAC channel routing. (connection status - * is obtained from reading back the PMU_AHBDMA_REQACK register) - */ - - if ((apb_req->src_index > max_reqn) || - (apb_req->dst_index > max_reqn)){ - - status = HAL_ERR_NOT_PRESENT; - goto _safe_exit; - } - - if (apb_req->src_index != APBBR_REQN_NONE){ /* quick filter out non-APB reqn */ - - uint32_t ahb_ch; - - /* Search for source device whether it is re-routed to AHB DMA channel */ - for (ahb_ch = 0; ahb_ch < DMAD_AHB_MAX_CHANNELS; ++ahb_ch){ - - uint32_t ahb_reqn = (IN32(PMU_AHBDMA_REQACK) >> (ahb_ch << 2)) & 0x0000000f; - - if ((ahb_reqn != APBBR_REQN_NONE) && - (ahb_reqn == dmad_apb_reqn_route_table[apb_req->src_index].ahb_reqn)){ - - DMAD_TRACE(("src: re-route DMAC ch %2d to APB.\r\n", ahb_ch)); - - /* got it! un-route from AHB back to APB */ - OUT32(dmad_ahb_ch_route_table[ahb_reqn].route_cr, - ((channel << PMU_CHANNEL_SHIFT) & PMU_CHANNEL_MASK)); - break; - } - } - } - - if (apb_req->dst_index != APBBR_REQN_NONE){ /* quick filter out non-APB reqn */ - - uint32_t ahb_ch; - - /* Search for source device whether it is re-routed to AHB DMA channel */ - for (ahb_ch = 0; ahb_ch < DMAD_AHB_MAX_CHANNELS; ++ahb_ch){ - - uint32_t ahb_reqn = (IN32(PMU_AHBDMA_REQACK) >> (ahb_ch << 2)) & 0x0000000f; - - if ((ahb_reqn != APBBR_REQN_NONE) && - (ahb_reqn == dmad_apb_reqn_route_table[apb_req->dst_index].ahb_reqn)){ - - DMAD_TRACE(("dst: re-route DMAC ch %2d to APB.\r\n", ahb_ch)); - - /* got it! un-route from AHB back to APB */ - OUT32(dmad_ahb_ch_route_table[ahb_reqn].route_cr, - ((channel << PMU_CHANNEL_SHIFT) & PMU_CHANNEL_MASK)); - break; - } - } - } - - /* APB Bridge DMA (Channel Setting) */ - - /* - * - CMD - * ENBDIS : 0 (disable for now) - * FININTSTS : 0 (clear finishing interrupt status) - * FININTENB : 1 (enable finishing interrupt) - * BURMOD : apb_req->burst_mode - * ERRINTSTS : 0 (clear error interrupt status) - * ERRINTENB : 1 (enable error interrupt) - * SRCADRSEL : AHB/APB, driver auto-conf according to apb_req->src_index - * DESADRSEL : AHB/APB, driver auto-conf according to apb_req->dst_index - * SRCADR : apb_req->src_addr_ctrl - * DESADR : apb_req->dst_addr_ctrl - * REQSEL : apb_req->src_index (? a "req/gnt" device looks to be a src... check to use reqn of src or dst) - * DATAWIDTH : apb_req->data_width - */ - - /* - * - CMD - * ENBDIS - * FININTSTS - * FININTENB - * BURMOD - * ERRINTSTS - * ERRINTENB - * SRCADR - * DESADR - * DATAWIDTH - */ - channel_cmd = ((uint32_t)APBBR_DMA_FINTEN_MASK | APBBR_DMA_ERRINTEN_MASK | - ((apb_req->burst_mode << APBBR_DMA_BURST_BIT) & APBBR_DMA_BURST_MASK) | - ((apb_req->src_addr_ctrl << APBBR_DMA_SRCADDRINC_SHIFT) & APBBR_DMA_SRCADDRINC_MASK) | - ((apb_req->dst_addr_ctrl << APBBR_DMA_DSTADDRINC_SHIFT) & APBBR_DMA_DSTADDRINC_MASK) | - ((apb_req->data_width << APBBR_DMA_DATAWIDTH_SHIFT) & APBBR_DMA_DATAWIDTH_MASK)); - - /* - * - CMD - * DSTADRSEL - * DREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->dst_index != APBBR_REQN_NONE) - dst_bus_sel = APBBR_ADDRSEL_APB; - else - dst_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_DSTADDRSEL_MASK & - (dst_bus_sel << APBBR_DMA_DSTADDRSEL_BIT)) | - (((uint32_t)apb_req->dst_index << APBBR_DMA_DREQSEL_SHIFT) & APBBR_DMA_DREQSEL_MASK)); - - /* - * - CMD - * SRCADRSEL - * SREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->src_index != APBBR_REQN_NONE) - src_bus_sel = APBBR_ADDRSEL_APB; - else - src_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_SRCADDRSEL_MASK & - (src_bus_sel << APBBR_DMA_SRCADDRSEL_BIT)) | - (((uint32_t)apb_req->src_index << APBBR_DMA_SREQSEL_SHIFT) & APBBR_DMA_SREQSEL_MASK)); - - /* - CMD outport */ - OUT32(channel_base + APBBR_DMA_CMD_OFFSET, channel_cmd); - - /* SRCADR and DESADR - not now */ - - /* CYC - not now */ - -_safe_exit: - hal_global_int_ctl(core_intl); - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_channel_init - * - * DESCRIPTION - * - * This function performs the DMA channel HW initialization abstraction. - * The real initialization task is dispatched according to the requested - * DMA controller type (AHB DMAC or APB bridge DMA controller). - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_channel_init(const DMAD_CHANNEL_REQUEST_DESC *ch_req){ - - uint32_t status; - - DMAD_TRACE(("_dmad_channel_init\r\n")); - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - if (ch_req->drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Initialize DMA controller */ - if (ch_req->controller == DMAD_DMAC_AHB_CORE) - status = _dmad_ahb_init(ch_req); - else - status = _dmad_apb_init(ch_req); - - /* Register HISR to perform deffered DMA ISR tasks */ - if (dmad.hisr_registered == 0){ - printf("_dmad_channel_init Register HISR\n"); - - dmad.hisr.th.fn = _dmad_hisr; - dmad.hisr.th.arg = &dmad.hisr; - dmad.hisr.th.prio = CONFIG_DMAD_HISR_PRIORITY; - dmad.hisr.th.ptos = &dmad_hisr_stack[DMAD_HISR_STACK_SIZE]; - dmad.hisr.th.stack_size = sizeof(dmad_hisr_stack); - dmad.hisr.th.name = "DMA BH"; - - status = hal_create_bh(&dmad.hisr); - if (status != HAL_SUCCESS) - return status; - - - dmad.hisr_registered = 1; - } - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_channel_enable - * - * DESCRIPTION - * - * This function is a abstraction routine to enable or disable a DMA - * channel. - * - * INPUTS - * - * ch_req : Pointer to the DMA request descriptor structure - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful enable/disable, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_channel_enable(const DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t enable){ - - DMAD_DRQ *drq; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Enable/disable DMA channel */ - if (ch_req->controller == DMAD_DMAC_AHB_CORE){ - - if (enable) - SETB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - else - CLRB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - } - else { /* APB */ - - if (enable) - SETB32(drq->channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_CHEN_BIT); - else - CLRB32(drq->channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_CHEN_BIT); - } - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_alloc_drb - * - * DESCRIPTION - * - * This function is used to allocate a DRB (DMA request block) within a DMA - * channel. DRB is used to queue all DMA submission requests for the - * channel. Allocated DRB node is moved from the free-list to the ready- - * list. - * - * INPUTS - * - * ch_req : (in) Pointer to the DMA request descriptor structure - * drb : (out) Reference to the pointer of allocated DRB. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful allocation, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -volatile int taskId=0; -uint32_t _dmad_alloc_drb(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB **drb){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq; - uint32_t core_intl; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Obtain exclusive access to the drq from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Lock DMA queue to prevent been updated by other tasks - */ - status = hal_wait_for_mutex(&drq->drb_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS) - return status; - } - - /* Initialize drb ptr in case of fail allocation */ - *drb = HAL_NULL; - -#ifdef DMAD_POLLING - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - while (drq->fre_head == 0){ - - /* Wait for free urbs. Sleep for 50 ms before polling again. */ - hal_global_int_ctl(core_intl); - hal_sleep(50); - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - } -#else - status = hal_pend_semaphore(&drq->drb_sem, HAL_SUSPEND); - - if (status == HAL_ERR_TIMEOUT){ - - status = HAL_ERR_NO_MEMORY; - goto _safe_exit; - } - else if (status != HAL_SUCCESS){ - - goto _safe_exit; - } - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); -#endif - _dmad_detach_head(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb); - - hal_global_int_ctl(core_intl); - - _dmad_attach_tail(drq->drb_pool, &drq->rdy_head, &drq->rdy_tail, (*drb)->node); - (*drb)->state = DMAD_DRB_STATE_READY; - (*drb)->completion_sem = HAL_NULL; - (*drb)->psp = HAL_NULL; - (*drb)->rcp = HAL_NULL; - if (ch_req->controller == DMAD_DMAC_AHB_CORE) { - (*drb)->src_index = ch_req->ahbch_req.src_index; - (*drb)->dst_index = ch_req->ahbch_req.dst_index; - } else if (ch_req->controller == DMAD_DMAC_APB_CORE) { - (*drb)->src_index = ch_req->apbch_req.src_index; - (*drb)->dst_index = ch_req->apbch_req.dst_index; - } else - status = HAL_ERR_NOT_PRESENT; - - goto _safe_exit; - -_safe_exit: - - /* Release locking of this function from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Unlock DMA queue to allow its access from other tasks - */ - hal_release_mutex(&drq->drb_pool_mutex); - } - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_free_drb - * - * DESCRIPTION - * - * This function is used to free a DRB (DMA request block) within a DMA - * channel. DRB is used to queue all DMA submission requests for the - * channel. Freed DRB node is moved from the ready-list to the free- - * list. - * - * INPUTS - * - * ch_req : (in) Pointer to the DMA request descriptor structure - * drb : (in) Pointer of a DRB struct to be freed. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful freeing, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_free_drb(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq; - uint32_t core_intl; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Obtain exclusive access to the drq from other tasks */ - if (hal_current() != HAL_NULL){ - - /* Suspending is only valid to the current task -- no need to lock if invoked from HISR. */ - status = hal_wait_for_mutex(&drq->drb_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS) - return status; - } - - /* Following code require _safe_exit return path */ - - if ((drq->rdy_head == 0) || (drb->node == 0) || - (drb->node >= DMAD_DRB_POOL_SIZE)){ - - DMAD_TRACE(("Ready-queue is empty or invalid node!\r\n")); - /* Unlock DMA queue to allow its access from other tasks */ - status = HAL_ERR_INVALID_ENTRY; - goto _safe_exit; - } - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - _dmad_detach_node(drq->drb_pool, &drq->rdy_head, &drq->rdy_tail, drb->node); - _dmad_attach_tail(drq->drb_pool, &drq->fre_head, &drq->fre_tail, drb->node); - - hal_global_int_ctl(core_intl); - - drb->state = DMAD_DRB_STATE_FREE; - drb->completion_sem = HAL_NULL; - -_safe_exit: - - /* Release locking of this function from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR - * Unlock DMA queue to allow its access from other tasks - */ - hal_release_mutex(&drq->drb_pool_mutex); - } - - return status; -} - - -int dmad_apb_config_dir(const DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t dir) -{ - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq = (DMAD_DRQ *)ch_req->drq; - DMAD_APBCH_REQUEST *apb_req = (DMAD_APBCH_REQUEST *)(&ch_req->apbch_req); - uint32_t channel_base = drq->channel_base; - uint32_t channel_cmd = 0; - uint32_t dst_bus_sel; - uint32_t src_bus_sel; - - channel_cmd = IN32(channel_base + APBBR_DMA_CMD_OFFSET); - channel_cmd &= ~(uint32_t) - (APBBR_DMA_SRCADDRINC_MASK | APBBR_DMA_DSTADDRINC_MASK | - APBBR_DMA_DSTADDRSEL_MASK | APBBR_DMA_DREQSEL_MASK | - APBBR_DMA_SRCADDRSEL_MASK | APBBR_DMA_SREQSEL_MASK); - if( dir == 0){ - channel_cmd = ((uint32_t)APBBR_DMA_FINTEN_MASK | APBBR_DMA_ERRINTEN_MASK | - ((apb_req->src_addr_ctrl << APBBR_DMA_SRCADDRINC_SHIFT) & APBBR_DMA_SRCADDRINC_MASK) | - ((apb_req->dst_addr_ctrl << APBBR_DMA_DSTADDRINC_SHIFT) & APBBR_DMA_DSTADDRINC_MASK)); - - /* - * - CMD - * DSTADRSEL - * DREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->dst_index != APBBR_REQN_NONE) - dst_bus_sel = APBBR_ADDRSEL_APB; - else - dst_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_DSTADDRSEL_MASK & - (dst_bus_sel << APBBR_DMA_DSTADDRSEL_BIT)) | - (((uint32_t)apb_req->dst_index << APBBR_DMA_DREQSEL_SHIFT) & APBBR_DMA_DREQSEL_MASK)); - - /* - * - CMD - * SRCADRSEL - * SREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->src_index != APBBR_REQN_NONE) - src_bus_sel = APBBR_ADDRSEL_APB; - else - src_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_SRCADDRSEL_MASK & - (src_bus_sel << APBBR_DMA_SRCADDRSEL_BIT)) | - (((uint32_t)apb_req->src_index << APBBR_DMA_SREQSEL_SHIFT) & APBBR_DMA_SREQSEL_MASK)); - - /* - CMD outport */ - OUT32(channel_base + APBBR_DMA_CMD_OFFSET, channel_cmd); - - } else { - channel_cmd = ((uint32_t)APBBR_DMA_FINTEN_MASK | APBBR_DMA_ERRINTEN_MASK | - ((apb_req->dst_addr_ctrl << APBBR_DMA_SRCADDRINC_SHIFT) & APBBR_DMA_SRCADDRINC_MASK) | - ((apb_req->src_addr_ctrl << APBBR_DMA_DSTADDRINC_SHIFT) & APBBR_DMA_DSTADDRINC_MASK)); - - /* - * - CMD - * DSTADRSEL - * DREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->src_index != APBBR_REQN_NONE) - src_bus_sel = APBBR_ADDRSEL_APB; - else - src_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_DSTADDRSEL_MASK & - (src_bus_sel << APBBR_DMA_DSTADDRSEL_BIT)) | - (((uint32_t)apb_req->src_index << APBBR_DMA_DREQSEL_SHIFT) & APBBR_DMA_DREQSEL_MASK)); - - /* - * - CMD - * SRCADRSEL - * SREQSEL (todo: this is FIA320 bit-mask, check AG101 bit-mask location) - */ - if (apb_req->dst_index != APBBR_REQN_NONE) - dst_bus_sel = APBBR_ADDRSEL_APB; - else - dst_bus_sel = APBBR_ADDRSEL_AHB; - - channel_cmd |= ((uint32_t)(APBBR_DMA_SRCADDRSEL_MASK & - (dst_bus_sel << APBBR_DMA_SRCADDRSEL_BIT)) | - (((uint32_t)apb_req->dst_index << APBBR_DMA_SREQSEL_SHIFT) & APBBR_DMA_SREQSEL_MASK)); - - /* - CMD outport */ - OUT32(channel_base + APBBR_DMA_CMD_OFFSET, channel_cmd); - - } - return status; - -} -void set_drq_transfer_size(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb) -{ - int data_width = -1; - if (ch_req->controller == DMAD_DMAC_AHB_CORE) { - /* AHB DMA */ - DMAD_AHBCH_REQUEST *ahb_req = (DMAD_AHBCH_REQUEST *)(&ch_req->ahbch_req); - if (drb->src_index == DMAC_REQN_NONE && drb->src_index == DMAC_REQN_NONE) - data_width = 0; - else { - if (drb->src_index != DMAC_REQN_NONE) - data_width = 2 - ahb_req->src_width; - else if (drb->dst_index != DMAC_REQN_NONE) - data_width = 2 - ahb_req->dst_width; - } - } else { - /* APB DMA */ - DMAD_APBCH_REQUEST *apb_req = (DMAD_APBCH_REQUEST *)(&ch_req->apbch_req); - data_width = 2 - apb_req->data_width; - } - if (data_width < 0) - KASSERT(1); - - drb->transfer_size = drb->req_size << data_width; -} -/***************************************************************************** - * FUNCTION - * - * _dmad_submit_request - * - * DESCRIPTION - * - * This function is used to submit a DRB (DMA request block) to a DMA - * channel. DRB is used to queue all DMA submission requests for the - * channel. Submitted DRB node is moved from the ready-list to the - * submitted-list. DMA kick-off is performed automatically if the DMA - * transaction has not started. When the DRB is completed, it will be - * removed from the submittied-list to the free-list in the DMA ISR. - * - * INPUTS - * - * ch_req : (in) Pointer to the DMA request descriptor structure - * drb : (in) Pointer of a DRB struct to be submitted. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful submission, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_submit_request(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq; - uint32_t core_intl; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Obtain exclusive access to the drq from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR - * Lock DMA queue to prevent been updated by other tasks - */ - status = hal_wait_for_mutex(&drq->drb_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS) - return status; - } - - /* Following code require _safe_exit return path */ - if ((drq->rdy_head == 0) || (drb->node == 0) || (drb->node >= DMAD_DRB_POOL_SIZE)){ - - status = HAL_ERR_INVALID_ENTRY; - goto _safe_exit; - } - - _dmad_detach_node(drq->drb_pool, &drq->rdy_head, &drq->rdy_tail, drb->node); - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* - * writeback d-cache if necessary - * - * Note: Here we take the assumption that, after writeback, the memory - * contents is in physical ram and valid for for dma transfer. - * Hence, we only need to do writeback at the beginning of the drb - * submission, and ignore the writeback before kicking off every - * drb in isr. - * - * Place writeback code before interrupt-disable to shorten the - * disable time. This might generate a penalty of cache-miss - * if the writeback routine also invalidated the cache contents. - */ - - set_drq_transfer_size(ch_req, drb); -#if ( defined(CONFIG_CPU_DCACHE_ENABLE) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH) ) - /* source is memory */ - //if (drq->dc_writeback != HAL_NULL && drb->src_index == DMAC_REQN_NONE) - if ( (unsigned long)drb->src_addr >= NTC0_BONDER_START && (unsigned long)drb->src_addr < NTC0_BONDER_END )//JUNIOR@2013/05/16 - drq->dc_writeback((unsigned long)(drb->src_addr),(unsigned long)(drb->src_addr) + (unsigned long)(drb->transfer_size)); -#endif - /* Check if submission is performed to an empty queue */ - if (drq->sbt_head == 0){ - - _dmad_attach_tail(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, drb->node); - drb->state = DMAD_DRB_STATE_SUBMITTED; - - hal_global_int_ctl(core_intl); - - /* pre-submission-programming */ - if (drb->psp) - drb->psp(drb->data); - - /* DMA is not running, so kick off transmission */ - if (ch_req->controller == DMAD_DMAC_AHB_CORE){ /* AHB */ - - /* Source and destination address */ - OUT32(drq->channel_base + DMAC_SRC_ADDR_OFFSET, drb->src_addr); - OUT32(drq->channel_base + DMAC_DST_ADDR_OFFSET, drb->dst_addr); - - /* Transfer size (in units of source width) */ - OUT32(drq->channel_base + DMAC_SIZE_OFFSET, drb->req_size); - - /* Enable DMA channel (Kick off transmission when client enable it's transfer state) */ - SETB32(drq->channel_base + DMAC_CSR_OFFSET, DMAC_CSR_CH_EN_BIT); - } - else { /* APB */ - - /* Source and destination address */ - OUT32(drq->channel_base + APBBR_DMA_SAD_OFFSET, drb->src_addr); - OUT32(drq->channel_base + APBBR_DMA_DAD_OFFSET, drb->dst_addr); - - /* Transfer size (in units of source width) */ - OUT32(drq->channel_base + APBBR_DMA_CYC_OFFSET, drb->req_size & APBBR_DMA_CYC_MASK); - - /* Enable DMA channel (Kick off transmission when client enable it's transfer state) */ - SETB32(drq->channel_base + APBBR_DMA_CMD_OFFSET, APBBR_DMA_CHEN_BIT); - } - } - else { - /* DMA is already running, so only queue DRB to the end of the list */ - _dmad_attach_tail(drq->drb_pool, &drq->sbt_head, &drq->sbt_tail, drb->node); - drb->state = DMAD_DRB_STATE_SUBMITTED; - - hal_global_int_ctl(core_intl); - } - -_safe_exit: - - /* Release locking of this function from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR - * Unlock DMA queue to allow its access from other tasks - */ - hal_release_mutex(&drq->drb_pool_mutex); - } - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _dmad_cancel_request - * - * DESCRIPTION - * - * This function is used to cancel a submitted DRB (DMA request block) - * of a DMA channel. DRB is used to queue all DMA submission requests for - * the channel. Submitted DRB node is moved from the ready-list to the - * submitted-list. Cancellation will fail if the DRB has already been - * kicked off and is waiting to be completed. - * - * INPUTS - * - * ch_req : (in) Pointer to the DMA request descriptor structure - * drb : (in) Pointer of a DRB struct to be cancelled. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful cancellation, - * else positive value is DMAD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _dmad_cancel_request(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb){ - - DMAD_DRQ *drq;; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - if (drq->sbt_head == 0) - return HAL_ERR_INVALID_ENTRY; - - if ((drb->node == 0) || (drb->node >= DMAD_DRB_POOL_SIZE)) - return HAL_ERR_INVALID_ENTRY; - - if (drb->completion_sem != HAL_NULL) - hal_destroy_semaphore(drb->completion_sem); - - // NDS_DCache_Enable(); - - return HAL_ERR_UNAVAILABLE; -} - -uint32_t _dmad_wait(DMAD_CHANNEL_REQUEST_DESC *ch_req){ - - uint32_t status = HAL_SUCCESS; - DMAD_DRQ *drq; - uint32_t core_intl; - - if (ch_req == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - drq = (DMAD_DRQ *)ch_req->drq; - - if (drq == HAL_NULL) - return HAL_ERR_INVALID_POINTER; - - /* Obtain exclusive access to the drq from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Lock DMA queue to prevent been updated by other tasks - */ - status = hal_wait_for_mutex(&drq->drb_pool_mutex, HAL_SUSPEND); - if (status != HAL_SUCCESS) - return status; - } - -#ifdef DMAD_POLLING - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - while (drq->sbt_head != 0){ - - hal_global_int_ctl(core_intl); - hal_sleep(50); - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - } -#else - status = hal_pend_semaphore(&drq->drb_sem, 300); - - if (status == HAL_ERR_TIMEOUT){ - - status = HAL_ERR_NO_MEMORY; - goto _safe_exit; - } - else if (status != HAL_SUCCESS){ - - goto _safe_exit; - } - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); -#endif - hal_global_int_ctl(core_intl); - goto _safe_exit; - -_safe_exit: - - /* Release locking of this function from other tasks */ - if (hal_current() != HAL_NULL){ - - /* - * Suspending is only valid to the current task -- no need to lock if invoked from HISR. - * Unlock DMA queue to allow its access from other tasks - */ - hal_release_mutex(&drq->drb_pool_mutex); - } - - return status; -} diff --git a/bsp/AE210P/driver/dma/dmad.h b/bsp/AE210P/driver/dma/dmad.h deleted file mode 100644 index 3710753d74..0000000000 --- a/bsp/AE210P/driver/dma/dmad.h +++ /dev/null @@ -1,275 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * dmad.h - * - * DESCRIPTION - * - * DMA controller driver internal supplement library. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * ag101regs.h - * ag101defs.h - * - ****************************************************************************/ -#ifndef __DMAD_H__ -#define __DMAD_H__ - -#include - -/***************************************************************************** - * Configuration section - ****************************************************************************/ -/* Code size control */ -#define DMAD_SMALL_FOOTPRINT 0 /* non-zero to disable extra features for small footprint */ - -/* Debug trace enable switch */ -#define DMAD_DEBUG_TRACE 0 /* non-zero to enable debug trace message */ - -/* DMAD globals section */ -enum DMAD_DMAC_CORE { DMAD_DMAC_AHB_CORE, DMAD_DMAC_APB_CORE }; - -/* - * AHB Channel Request - * - * Notes for developers: - * These should be channel-only properties. Controller-specific properties - * should be separated as other driver structure or driver buildin-hardcode. - * If controller properties are embeded in this union, request for a channel - * may unexpectedly override the controller setting of the request of other - * channels. - */ -typedef struct DMAD_AHBCH_REQUEST_STRUCT{ - - /* controller property (removed! should not exist in this struct) */ - // uint8_t big_endian; /* (in) currently only M0 is designed, and transfer endian is default to little */ - - /* channel property */ - uint32_t sync; /* (in) non-zero if src and dst have different clock domain */ - uint32_t priority; /* (in) DMAC_CSR_CHPRI_0 (lowest) ~ DMAC_CSR_CHPRI_3 (highest) */ - uint32_t hw_handshake; /* (in) non-zero to enable hardware handshake mode */ - /* (required when need multiple bursts or in chain mode?) */ - uint32_t burst_size; /* (in) DMAC_CSR_SIZE_1 ~ DMAC_CSR_SIZE_256 */ - - /* source property */ - uint32_t src_width; /* (in) DMAC_CSR_WIDTH_8, DMAC_CSR_WIDTH_16, or DMAC_CSR_WIDTH_32 */ - uint32_t src_addr_ctrl; /* (in) DMAC_CSR_AD_INC, DMAC_CSR_AD_DEC, or DMAC_CSR_AD_FIX */ - uint32_t src_reqn; /* (in) DMAC_REQN_xxx (also used to help determine channel number) */ - uint32_t src_index; - - /* destination property */ - uint32_t dst_width; /* (in) DMAC_CSR_WIDTH_8, DMAC_CSR_WIDTH_16, or DMAC_CSR_WIDTH_32 */ - uint32_t dst_addr_ctrl; /* (in) DMAC_CSR_AD_INC, DMAC_CSR_AD_DEC, or DMAC_CSR_AD_FIX */ - uint32_t dst_reqn; /* (in) DMAC_REQN_xxx (also used to help determine channel number) */ - uint32_t dst_index; - -} DMAD_AHBCH_REQUEST; - -/* - * APB Channel Request - * - * Notes for developers: - * These should be channel-only properties. Controller-specific properties - * should be separated as other driver structure or driver buildin-hardcode. - * If controller properties are embeded in this union, request for a channel - * may unexpectedly override the controller setting of the request of other - * channels. - */ -typedef struct DMAD_APBCH_REQUEST_STRUCT{ - - /* controller property (removed! should not exist in this struct) */ - - /* channel property */ - uint32_t burst_mode; /* (in) Burst mode (0: no burst 1-, 1: burst 4- data cycles per dma cycle) */ - uint32_t data_width; /* (in) APBBR_DATAWIDTH_4(word), APBBR_DATAWIDTH_2(half-word), APBBR_DATAWIDTH_1(byte) */ - - /* source property */ - uint32_t src_addr_ctrl; /* (in) APBBR_ADDRINC_xxx */ - uint32_t src_reqn; /* (in) APBBR_REQN_xxx (also used to help determine bus selection) */ - uint32_t src_index; - - /* destination property */ - uint32_t dst_addr_ctrl; /* (in) APBBR_ADDRINC_xxx */ - uint32_t dst_reqn; /* (in) APBBR_REQN_xxx (also used to help determine bus selection) */ - uint32_t dst_index; - -} DMAD_APBCH_REQUEST; - -/* Channel Request Descriptor */ -typedef struct DMAD_CHANNEL_REQUEST_DESC_STRUCT{ - - uint32_t controller; /* (in) Use DMA controller in AHB or APB - one of the enum value of DMAD_DMAC_CORE */ - uint32_t channel; /* (out) Allocated/granted channel */ - - void *drq; /* (out) Handle to DMA request queue (ptr to DMAD_DRQ, internal use) */ - - /* - * Properties for channel-alloc request - * Notes for developers: - * These should be channel-only properties. Controller-specific properties - * should be separated as other driver structure or driver buildin-hardcode. - * If controller properties are embeded in this union, request for a channel - * may unexpectedly override the controller setting of the request of other - * channels. - */ - union { - DMAD_AHBCH_REQUEST ahbch_req; /* (in) parameters for AHB DMAC channel request */ - DMAD_APBCH_REQUEST apbch_req; /* (in) parameters for APB Bridge embeded DMA conteoller channel request */ - }; - -} DMAD_CHANNEL_REQUEST_DESC; - - -enum DMAD_DRB_STATE{ - - DMAD_DRB_STATE_FREE = 0, - DMAD_DRB_STATE_READY, - DMAD_DRB_STATE_SUBMITTED, - DMAD_DRB_STATE_TRANSFERRING, - DMAD_DRB_STATE_COMPLETED, - DMAD_DRB_STATE_ERROR, - DMAD_DRB_STATE_ABORT, -}; - -/* DMA request block */ -typedef struct DMAD_DRB_STRUCT{ - - uint32_t prev; /* (internal) Linked list previous node */ - uint32_t next; /* (internal) Linked list next node */ - uint32_t node; /* (internal) Linked list this node */ - - uint32_t state; /* (out) DRB's current state in the whole submission cycle. */ - - void *src_addr; /* (in) Source address in this request */ - - void *dst_addr; /* (in) Destination address in this submission request */ - - uint32_t req_size; /* (in) AHB DMA (12 bits): 0 ~ 4095, unit is number of "data width" */ - /* APB DMA (24 bits): 0 ~ 16M-1, unit is number of "data width * burst size" */ - uint32_t transfer_size; /* req_size * data_width*/ - hal_semaphore_t *completion_sem;/* (in) Application supplied semaphore to signal completion of this */ - /* DMA request block. Specify null to by-pass this mechanism. */ - void (*psp)(void*); /* pre-submission programming */ - void (*rcp)(void*); /* completion-of-submission programming */ - void *data; - uint32_t src_index; /* to indicate it's device or memory */ - uint32_t dst_index; /* to indicate it's device or memory */ -// uint32_t src_reqn; /* to indicate it's device or memory */ -// uint32_t dst_reqn; /* to indicate it's device or memory */ - -} DMAD_DRB; - -enum DMAD_CHDIR -{ - DMAD_DIR_A0_TO_A1 = 0, - DMAD_DIR_A1_TO_A0 = 1, -}; -/* Debug Trace Mechanism */ -#if (DMAD_DEBUG_TRACE) - -#define DMAD_TRACE(x) printf x -#define DMAD_STRACE(x) printf x - -#else /* DMAD_DEBUG_TRACE */ - -#define DMAD_TRACE(x) -#define DMAD_STRACE(x) - -#endif /* DMAD_DEBUG_TRACE */ - - -/***************************************************************************** - * DMAD Driver Interface - * - * [Structures] - * - * [Functions] - * - * - ****************************************************************************/ - -extern uint32_t _dmad_channel_alloc(DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t init); -extern uint32_t _dmad_channel_free(const DMAD_CHANNEL_REQUEST_DESC *ch_req); -extern uint32_t _dmad_channel_init(const DMAD_CHANNEL_REQUEST_DESC *ch_req); -extern uint32_t _dmad_channel_enable(const DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t enable); - -extern uint32_t _dmad_alloc_drb(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB **drb); -extern uint32_t _dmad_free_drb(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb); - -extern uint32_t _dmad_submit_request(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb); -extern uint32_t _dmad_cancel_request(DMAD_CHANNEL_REQUEST_DESC *ch_req, DMAD_DRB *drb); -extern uint32_t _dmad_wait(DMAD_CHANNEL_REQUEST_DESC *ch_req); - -extern uint32_t _dmad_get_reqn(uint32_t dma_controller, uint32_t device); - -enum ahp_reqn_index_t { - AHB_NONE, - AHB_CFC, - AHB_SSP, - AHB_UART1TX, - AHB_UART1RX, - AHB_I2SAC97, - AHB_USB, - AHB_EXT0, - AHB_EXT1, - AHB_SSP1TX, - AHB_SSP1RX, - AHB_UART2TX, - AHB_UART2RX, - AHB_UART4TX, - AHB_UART4RX, - AHB_SDC, - AHB_SSP2TX, - AHB_SSP2RX, - AHB_USB_2_0, - AHB_USB_1_1_EP1, - AHB_USB_1_1_EP2, - AHB_USB_1_1_EP3, - AHB_USB_1_1_EP4 -}; - -enum apb_reqn_index_t { - APB_NONE, - APB_CFC, - APB_SSP, - APB_BTUART, - APB_I2SAC97, - APB_STUART, - APB_I2S, - APB_SSP2, - APB_EXT0, - APB_EXT1, - APB_SSP1TX, - APB_SSP1RX, - APB_UART2TX, - APB_UART2RX, - APB_UART4TX, - APB_UART4RX, - APB_SDC, - APB_SSP2TX, - APB_SSP2RX, - APB_USB_2_0, - APB_USB_1_1_EP1, - APB_USB_1_1_EP2, - APB_USB_1_1_EP3, - APB_USB_1_1_EP4, - APB_MAX -}; - -#endif /* __DMAD_H__ */ diff --git a/bsp/AE210P/driver/gpio/gpio.c b/bsp/AE210P/driver/gpio/gpio.c deleted file mode 100644 index add7e79cc0..0000000000 --- a/bsp/AE210P/driver/gpio/gpio.c +++ /dev/null @@ -1,86 +0,0 @@ -#include "gpio.h" -//#include "hal.h" -#include "bsp_hal.h" - -struct gpio_dev_t *gpio_p; - -//static void _gpio_lisr(int vector) -//{ -// DEBUG(0, 1, "Enter\n"); -// if (vector != IRQ_GPIO_VECTOR) -// hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); -// -// /* Disable GPIO interrupt */ -// uint32_t prv_msk = hal_intc_irq_mask(IRQ_GPIO_VECTOR); -// -// /* Get int state and then clear it */ -// unsigned int int_sr = IN32(GPIOC_INT_RAW_STATE); -// gpio_p->int_data = int_sr; -// OUT32(GPIOC_INT_CLEAR, int_sr); -// -// /* Clean GPIO pending */ -// hal_intc_irq_clean(IRQ_GPIO_VECTOR); -// -// /* Enable higher priority interrupt */ -// /* comment it to disable nested interrupt */ -// GIE_ENABLE(); -// hal_raise_bh(&gpio_p->hisr); -// -// GIE_DISABLE(); -// /* - Enable GPIO interrupt */ -// hal_intc_irq_unmask(prv_msk); -//} - -int gpio_init(struct gpio_dev_t *gpio) -{ -// int status = HAL_SUCCESS; -// int core_intl; -// -// /* initialize global gpio pointer */ -// gpio_p = gpio; -// core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); -// -// /* INTC */ -// // - Disable GPIO interrupt -// hal_intc_irq_disable(IRQ_GPIO_VECTOR); -// // - Clear GPIO interrupt status -// hal_intc_irq_clean(IRQ_GPIO_VECTOR); -// // - Setup #PENIRQ trigger mode - edge trigger -// // - Setup #PENIRQ trigger level - active high -// hal_intc_irq_config(IRQ_GPIO_VECTOR, IRQ_EDGE_TRIGGER, IRQ_ACTIVE_HIGH); -// -// -// /* GPIO */ -// /* falling, interrupt when pressed */ -// //OUT32(GPIOC_INT_RISE_NEG, 0xFFFFFFFF); -// /* rising, interrupt when released */ -// OUT32(GPIOC_INT_RISE_NEG, 0x0); -// /* enable all gpio interrupt GPIO1-5*/ -// OUT32(GPIOC_INT_ENABLE, 0x3E); -// /* set the max value to debounce */ -// OUT32(GPIOC_INT_BOUNCE_PRESCALE, 0xFFFF); -// /* enable debounce */ -// OUT32(GPIOC_INT_BOUNCE_ENABLE, 0x3E); -// -// status = hal_register_isr(IRQ_GPIO_VECTOR, _gpio_lisr, (void*)0); -// -// if (status != HAL_SUCCESS){ -// DEBUG(1, 1, "Failed to register GPIO driver LISR!\n"); -// return status; -// } -// -// status = hal_create_bh(&gpio->hisr); -// if (status != HAL_SUCCESS){ -// DEBUG(1, 1, "Failed to create GPIO driver HISR!\n"); -// return status; -// } -// -// // - Enable GPIO interrupt -// hal_intc_irq_enable(IRQ_GPIO_VECTOR); -// -// /* Restore CPU interrupt controller to previous level */ -// hal_global_int_ctl(core_intl); -// return status; - - return 0; -} diff --git a/bsp/AE210P/driver/gpio/gpio.h b/bsp/AE210P/driver/gpio/gpio.h deleted file mode 100644 index 6758891810..0000000000 --- a/bsp/AE210P/driver/gpio/gpio.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __AG101_GPIOC_INC__ -#define __AG101_GPIOC_INC__ - -//#include "hal.h" - -// GPIO port name definition -typedef enum GPIOD_PORTS -{ - GPIO0 = 0x00000001, - GPIO1 = 0x00000002, - GPIO2 = 0x00000004, - GPIO3 = 0x00000008, - GPIO4 = 0x00000010, - GPIO5 = 0x00000020, - GPIO6 = 0x00000040, - GPIO7 = 0x00000080, - - GPIO8 = 0x00000100, - GPIO9 = 0x00000200, - GPIO10 = 0x00000400, - GPIO11 = 0x00000800, - GPIO12 = 0x00001000, - GPIO13 = 0x00002000, - GPIO14 = 0x00004000, - GPIO15 = 0x00008000, - - GPIO16 = 0x00010000, - GPIO17 = 0x00020000, - GPIO18 = 0x00040000, - GPIO19 = 0x00080000, - GPIO20 = 0x00100000, - GPIO21 = 0x00200000, - GPIO22 = 0x00400000, - GPIO23 = 0x00800000, - - GPIO24 = 0x01000000, - GPIO25 = 0x02000000, - GPIO26 = 0x04000000, - GPIO27 = 0x08000000, - GPIO28 = 0x10000000, - GPIO29 = 0x20000000, - GPIO30 = 0x40000000, - GPIO31 = 0x80000000, - -} GPIOD_PORTS; - -struct gpio_dev_t -{ -// hal_bh_t hisr; - unsigned int int_data; -}; -#endif // __AG101_GPIOC_INC__ diff --git a/bsp/AE210P/driver/lcd/Kbuild b/bsp/AE210P/driver/lcd/Kbuild deleted file mode 100644 index 0d69174510..0000000000 --- a/bsp/AE210P/driver/lcd/Kbuild +++ /dev/null @@ -1 +0,0 @@ -lib-${CONFIG_FB_FTLCDC100} += font.o lcd.o diff --git a/bsp/AE210P/driver/lcd/font.c b/bsp/AE210P/driver/lcd/font.c deleted file mode 100644 index eb1428c536..0000000000 --- a/bsp/AE210P/driver/lcd/font.c +++ /dev/null @@ -1,248 +0,0 @@ -#include "lcd/lcd.h" - -/* - * Due to legal issue, this section is disabled and only available to the - * usage of internal developement and testing. - * - * Build-in OSD 12x16 font table (sizeof(UINT16) * 16 per font) - * LCDC maximum number of fonts = 256 - * - * Font Name : Courier New (C) Microsoft - * - * ASCII Code Range : (0x20~0x7e, and 0x7f is a special symbol looks like 'v') - * " !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~v" - */ - -uint16_t drv_lcd_font_table[] __attribute__((aligned(4))) = { - - /* ASCII 0x20 ~ 0x2F */ - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0040, 0x0040, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0000, 0x0000, 0x0040, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01b0, 0x01b0, 0x0120, 0x0120, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0090, 0x0090, 0x0120, 0x03f0, 0x0120, - 0x0120, 0x03f0, 0x0120, 0x0240, 0x0240, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0040, 0x00e0, 0x0120, 0x0100, 0x00c0, - 0x0020, 0x0120, 0x01c0, 0x0040, 0x0040, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x00c0, 0x0120, 0x0120, 0x00c0, 0x01f0, - 0x0060, 0x0090, 0x0090, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0040, 0x0040, 0x0040, 0x0040, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0020, 0x0020, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x0040, 0x0020, 0x0020, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0100, 0x0100, 0x0100, 0x0080, 0x0080, - 0x0080, 0x0080, 0x0080, 0x0100, 0x0100, 0x0100, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0080, 0x0080, 0x03e0, 0x0080, 0x0140, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0040, 0x0040, 0x0040, 0x03f8, - 0x0040, 0x0040, 0x0040, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x00c0, 0x0080, 0x0180, 0x0100, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03f0, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x00c0, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0010, 0x0010, 0x0020, 0x0020, 0x0040, 0x0040, - 0x0080, 0x0080, 0x0100, 0x0100, 0x0200, 0x0000, 0x0000, 0x0000, - - /* ASCII 0x30 ~ 0x3F */ - 0x0000, 0x0000, 0x0000, 0x01e0, 0x0210, 0x0210, 0x0210, 0x0210, - 0x0210, 0x0210, 0x0210, 0x01e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0040, 0x01c0, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01c0, 0x0220, 0x0020, 0x0040, 0x0040, - 0x0080, 0x0100, 0x0220, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01c0, 0x0220, 0x0020, 0x0020, 0x00c0, - 0x0020, 0x0020, 0x0220, 0x01c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0060, 0x00a0, 0x00a0, 0x0120, 0x0120, - 0x03f0, 0x0020, 0x0020, 0x0070, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01f0, 0x0100, 0x0100, 0x01e0, 0x0010, - 0x0010, 0x0010, 0x0210, 0x01e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0070, 0x0080, 0x0100, 0x0100, 0x01e0, - 0x0110, 0x0110, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x03f0, 0x0210, 0x0010, 0x0020, 0x0020, - 0x0020, 0x0040, 0x0040, 0x0040, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01c0, 0x0220, 0x0220, 0x0220, 0x01c0, - 0x0220, 0x0220, 0x0220, 0x01c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01e0, 0x0210, 0x0210, 0x0210, 0x0210, - 0x01f0, 0x0010, 0x0020, 0x03c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x00c0, 0x00c0, - 0x0000, 0x0000, 0x00c0, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x00c0, 0x00c0, - 0x0000, 0x0000, 0x00c0, 0x0080, 0x0180, 0x0100, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0018, 0x0060, 0x0080, - 0x0300, 0x0080, 0x0060, 0x0018, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x07f0, 0x0000, 0x0000, - 0x07f0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0300, 0x00c0, 0x0020, - 0x0018, 0x0020, 0x00c0, 0x0300, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x01c0, 0x0220, 0x0020, 0x0020, - 0x0040, 0x0080, 0x0000, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, - - /* ASCII 0x40 ~ 0x4F */ - 0x0000, 0x0000, 0x0000, 0x00e0, 0x0110, 0x0210, 0x0270, 0x0290, - 0x0290, 0x0270, 0x0200, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x01c0, 0x00c0, 0x00c0, 0x0120, - 0x0120, 0x01e0, 0x0210, 0x0738, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03e0, 0x0110, 0x0110, 0x01e0, - 0x0110, 0x0110, 0x0110, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x00d0, 0x0130, 0x0200, 0x0200, - 0x0200, 0x0200, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03c0, 0x0120, 0x0110, 0x0110, - 0x0110, 0x0110, 0x0120, 0x03c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03f0, 0x0110, 0x0120, 0x01e0, - 0x0120, 0x0100, 0x0110, 0x03f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03f0, 0x0110, 0x0150, 0x01c0, - 0x0140, 0x0100, 0x0100, 0x03c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x00d0, 0x0130, 0x0200, 0x0200, - 0x0278, 0x0210, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0110, 0x0110, 0x01f0, - 0x0110, 0x0110, 0x0110, 0x03b8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x01f0, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x01f8, 0x0020, 0x0020, 0x0020, - 0x0220, 0x0220, 0x0220, 0x01c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0120, 0x0140, 0x0180, - 0x01c0, 0x0120, 0x0110, 0x0398, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x07c0, 0x0100, 0x0100, 0x0100, - 0x0110, 0x0110, 0x0110, 0x07f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0718, 0x0318, 0x02a8, 0x02a8, - 0x02a8, 0x0248, 0x0208, 0x0718, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0190, 0x0190, 0x0150, - 0x0150, 0x0150, 0x0130, 0x03b0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x00e0, 0x0110, 0x0208, 0x0208, - 0x0208, 0x0208, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - - /* ASCII 0x50 ~ 0x5F */ - 0x0000, 0x0000, 0x0000, 0x0000, 0x03e0, 0x0110, 0x0110, 0x0110, - 0x01e0, 0x0100, 0x0100, 0x03c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x00e0, 0x0110, 0x0208, 0x0208, - 0x0208, 0x0208, 0x0110, 0x00e0, 0x00f8, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03e0, 0x0110, 0x0110, 0x0110, - 0x01e0, 0x0120, 0x0110, 0x0388, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x01d0, 0x0230, 0x0200, 0x01e0, - 0x0010, 0x0010, 0x0310, 0x02e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03f8, 0x0248, 0x0248, 0x0040, - 0x0040, 0x0040, 0x0040, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0110, 0x0110, 0x0110, - 0x0110, 0x0110, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0738, 0x0210, 0x0120, 0x0120, - 0x0120, 0x00c0, 0x00c0, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0718, 0x0208, 0x0248, 0x0248, - 0x02a8, 0x02a8, 0x02a8, 0x0110, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0110, 0x00a0, 0x0040, - 0x0040, 0x00a0, 0x0110, 0x03b8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0110, 0x00a0, 0x00a0, - 0x0040, 0x0040, 0x0040, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x03f0, 0x0210, 0x0020, 0x0040, - 0x0080, 0x0110, 0x0210, 0x03f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x00e0, 0x0080, 0x0080, 0x0080, 0x0080, - 0x0080, 0x0080, 0x0080, 0x0080, 0x0080, 0x00e0, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0200, 0x0100, 0x0100, 0x0100, 0x0080, 0x0080, - 0x0040, 0x0040, 0x0020, 0x0020, 0x0020, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x01c0, 0x0040, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x0040, 0x0040, 0x01c0, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0080, 0x0080, 0x0140, 0x0220, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x07f8, - - /* ASCII 0x60 ~ 0x6F */ - 0x0000, 0x0000, 0x0000, 0x0080, 0x0040, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01e0, 0x0210, - 0x01f0, 0x0210, 0x0230, 0x01d8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0600, 0x0200, 0x0200, 0x02e0, 0x0310, - 0x0210, 0x0210, 0x0310, 0x06e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01d0, 0x0230, - 0x0200, 0x0200, 0x0210, 0x01e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0030, 0x0010, 0x0010, 0x01d0, 0x0230, - 0x0210, 0x0210, 0x0210, 0x01f8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01e0, 0x0210, - 0x03f0, 0x0200, 0x0200, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0070, 0x0080, 0x0080, 0x03f0, 0x0080, - 0x0080, 0x0080, 0x0080, 0x01e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01d8, 0x0230, - 0x0210, 0x0210, 0x0230, 0x01d0, 0x0010, 0x0010, 0x01e0, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0300, 0x0100, 0x0100, 0x0160, 0x0190, - 0x0110, 0x0110, 0x0110, 0x03b8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0040, 0x0000, 0x01c0, 0x0040, - 0x0040, 0x0040, 0x0040, 0x03f8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0040, 0x0000, 0x03e0, 0x0020, - 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x0020, 0x03c0, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0300, 0x0100, 0x0100, 0x0170, 0x0140, - 0x0180, 0x0140, 0x0120, 0x0338, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x00c0, 0x0040, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x03f8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0690, 0x0368, - 0x0248, 0x0248, 0x0248, 0x0768, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0360, 0x0190, - 0x0110, 0x0110, 0x0110, 0x03b8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01e0, 0x0210, - 0x0210, 0x0210, 0x0210, 0x01e0, 0x0000, 0x0000, 0x0000, 0x0000, - - /* ASCII 0x70 ~ 0x7F */ - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0360, 0x0190, - 0x0110, 0x0110, 0x0110, 0x01e0, 0x0100, 0x0100, 0x0380, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01d8, 0x0230, - 0x0210, 0x0210, 0x0230, 0x01d0, 0x0010, 0x0010, 0x0038, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0370, 0x0180, - 0x0100, 0x0100, 0x0100, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01f0, 0x0210, - 0x01e0, 0x0010, 0x0210, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0100, 0x0100, 0x03f0, 0x0100, - 0x0100, 0x0100, 0x0110, 0x00e0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0330, 0x0110, - 0x0110, 0x0110, 0x0130, 0x00d8, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0738, 0x0210, - 0x0120, 0x0120, 0x00c0, 0x00c0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0718, 0x0208, - 0x0248, 0x02a8, 0x02a8, 0x0110, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0330, 0x0120, - 0x00c0, 0x00c0, 0x0120, 0x0330, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x03b8, 0x0110, - 0x0110, 0x00a0, 0x00a0, 0x0040, 0x0040, 0x0080, 0x01c0, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x01f0, 0x0120, - 0x0040, 0x0080, 0x0110, 0x01f0, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0020, 0x0040, 0x0040, 0x0040, 0x0040, - 0x0080, 0x0040, 0x0040, 0x0040, 0x0040, 0x0020, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0040, 0x0040, 0x0040, 0x0040, 0x0040, - 0x0040, 0x0040, 0x0040, 0x0040, 0x0040, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0100, 0x0080, 0x0080, 0x0080, 0x0080, - 0x0040, 0x0080, 0x0080, 0x0080, 0x0080, 0x0100, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0190, - 0x0260, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0008, 0x0010, 0x0010, - 0x0320, 0x0120, 0x00c0, 0x0040, 0x0040, 0x0000, 0x0000, 0x0000, -}; - -int width = 12; -int height = 16; - -void draw_font(int x, int y, int ascii) -{ - uint16_t *idx; - int i, j; - - if (ascii < 0 || ascii > (sizeof(drv_lcd_font_table) / sizeof(uint16_t))) - return; - - idx = &drv_lcd_font_table[(ascii - ' ') * 16]; - -// drv_lcd_erase_rect(x, width, y, height); - - for (j = 0; j < height; j++) { - - for (i = 0; i < width; i++) { - - if (*idx & (1 << i)) - drv_lcd_draw_rect(x + width - i , 1, y + j, 1, 0xff, 0, 0xff); - } - - idx++; - } -} diff --git a/bsp/AE210P/driver/lcd/lcd-info.h b/bsp/AE210P/driver/lcd/lcd-info.h deleted file mode 100644 index eccaade871..0000000000 --- a/bsp/AE210P/driver/lcd/lcd-info.h +++ /dev/null @@ -1,114 +0,0 @@ -#ifndef __LCD_INFO_H__ -#define __LCD_INFO_H__ - -/* - * HBP : Horizontal Back Porch - * HFP : Horizontal Front Porch - * HSPW: Horizontal Sync. Pulse Width - * PPL : Pixels-per-line = 16(PPL+1) - */ -#define ENC_PARAM_TIME0(HBP, HFP, HSPW, PPL) \ - ((((HBP) - 1) << 24) | \ - (((HFP) - 1) << 16) | \ - (((HSPW) - 1) << 8 ) | \ - ((((PPL) >> 4) - 1) << 2 )) - -/* - * HBP : Vertical Back Porch - * HFP : Vertical Front Porch - * HSPW: Vertical Sync. Pulse Width - * LPP : Lines-per-panel = LPP + 1 - */ -#define ENC_PARAM_TIME1(VBP, VFP, VSPW, LPP) \ - ((((VBP) ) << 24) | \ - (((VFP) ) << 16) | \ - (((VSPW) - 1) << 10) | \ - (((LPP) - 1) )) - -/* - * PRA : Pixel Rate Adaptive - * IOE : Invert Panel Output Enable - * IPC : Invert Panel Clock (Test Chip Testing) - * IHS : Invert Horisontal Sync. - * IVS : Invert Versical Sync. - * PCD : Panel Clock Divisor - */ -#define ENC_PARAM_TIME2(PRA, IOE, IPC, IHS, IVS, PCD) \ - (((PRA) << 15) | \ - ((IOE) << 14) | \ - ((IPC) << 13) | \ - ((IHS) << 12) | \ - ((IVS) << 11) | \ - (((PCD) - 1) )) - -/* - * Enable YCbCr - * Enable YCbCr422 - * FIFO threadhold - * Panel type, 0-6bit, 1-8bit - * LcdVComp, when to generate interrupt, 1: start of back_porch - * Power Enable - * Big Endian Pixel/Byte Ordering - * BGR - * TFT - * LCD bits per pixel - * Controller Enable - */ -#define ENC_PARAM_CTRL(ENYUV, ENYUV422, FIFOTH, PTYPE, VCOMP, LCD_ON, ENDIAN, BGR, TFT, BPP, LCD_EN) \ - ((ENYUV << 18) | \ - (ENYUV422 << 17) | \ - (FIFOTH << 16) | \ - (PTYPE << 15) | \ - (VCOMP << 12) | \ - (LCD_ON << 11) | \ - (ENDIAN << 9) | \ - (BGR << 8) | \ - (TFT << 5) | \ - (BPP << 1) | \ - (LCD_EN)) - -#if defined(CONFIG_COLOR_DEPTH16) -#define LCD_COLOR_DEPTH 0x4 -#define LCD_PANEL_BPP 16 -#elif defined(CONFIG_COLOR_DEPTH24) -#define LCD_COLOR_DEPTH 0x5 -#define LCD_PANEL_BPP 24 -#else -#define LCD_COLOR_DEPTH 0x5 -#define LCD_PANEL_BPP 24 -#endif - -#ifdef CONFIG_PANEL_AUA036QN01 - -#define LCD_PANEL_WIDTH 320 -#define LCD_PANEL_HEIGHT 240 - -#define LCD_TIME0 ENC_PARAM_TIME0(7, 6, 1, 320) /* 0x0605004c */ -#define LCD_TIME1 ENC_PARAM_TIME1(1, 1, 1, 240) /* 0x010100ef */ -#define LCD_TIME2 ENC_PARAM_TIME2(0, 0, 1, 1, 1, 0x7) /* 0x00003806 */ -#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 1, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1) /* 0x0001b928 */ - -#endif - -#ifdef CONFIG_PANEL_AUA070VW04 - -#define LCD_PANEL_WIDTH 800 -#define LCD_PANEL_HEIGHT 480 - -#define LCD_TIME0 ENC_PARAM_TIME0(88, 40, 128, 800) -#define LCD_TIME1 ENC_PARAM_TIME1(21, 1, 3, 480) -#define LCD_TIME2 ENC_PARAM_TIME2(0, 1, 1, 1, 1, 0x7) -#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 1, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1) - -#endif - -#ifdef CONFIG_PANEL_CH7013A - -#define LCD_TIME0 ENC_PARAM_TIME0(42, 10, 96, 640) -#define LCD_TIME1 ENC_PARAM_TIME1(28, 5, 2, 480) -#define LCD_TIME2 ENC_PARAM_TIME2(0, 1, 1, 0, 0, 0x3) -#define LCD_CTRL ENC_PARAM_CTRL(0, 0, 1, 0, 0x3, 1, 0x0, 1, 1, LCD_COLOR_DEPTH, 1) - -#endif /* CONFIG_CH7013A */ - -#endif /* __LCD_INFO_H__ */ diff --git a/bsp/AE210P/driver/lcd/lcd.c b/bsp/AE210P/driver/lcd/lcd.c deleted file mode 100644 index 022a2838dd..0000000000 --- a/bsp/AE210P/driver/lcd/lcd.c +++ /dev/null @@ -1,142 +0,0 @@ -#include "hal.h" -#include "lcd/lcd.h" -#include "lcd-info.h" - -#ifdef CONFIG_PLAT_AG101P_16MB - #define LCD_BASE 0x00e10000 -#else - #define LCD_BASE 0x90600000 -#endif - -#define LCD_TIME0_OFFSET 0x00 -#define LCD_TIME1_OFFSET 0x04 -#define LCD_TIME2_OFFSET 0x08 -#define LCD_BASE_OFFSET 0x10 -#define LCD_INT_EN_OFFSET 0x18 -#define LCD_CTRL_OFFSET 0x1C -#define LCD_INT_CLR_OFFSET 0x20 -#define LCD_INT_MSK_OFFSET 0x24 - -static pixel_t _drv_lcd_fb[ LCD_PANEL_WIDTH * LCD_PANEL_HEIGHT] __attribute__((aligned (64))); -static pixel_t _drv_lcd_bg[ LCD_PANEL_WIDTH * LCD_PANEL_HEIGHT] __attribute__((aligned (64))); - -static pixel_t *drv_lcd_fb = _drv_lcd_fb; -static pixel_t *drv_lcd_bg = _drv_lcd_bg; -extern void nds32_dcache_flush(); - -void drv_lcd_flip(void) -{ - pixel_t *tmp = drv_lcd_fb; - - drv_lcd_fb = drv_lcd_bg; - drv_lcd_bg = tmp; - - OUT32(LCD_BASE + LCD_BASE_OFFSET, drv_lcd_fb); -} - -pixel_t *drv_lcd_get_fb(void) -{ - return drv_lcd_fb; -} - -pixel_t *drv_lcd_get_bg(void) -{ - return drv_lcd_bg; -} - -void drv_lcd_get_param(int *width, int *height, int *bpp) -{ - if (width) - *width = LCD_PANEL_WIDTH; - - if (height) - *height = LCD_PANEL_HEIGHT; - - if (bpp) - *bpp = LCD_PANEL_BPP; -} - -void drv_lcd_fill_bg(void) -{ - pixel_t *base = drv_lcd_bg; - - int i, j; - for (i = j = 0; j < LCD_PANEL_HEIGHT; j++) { - for (i = 0; i < LCD_PANEL_WIDTH; i++) { -#if defined(CONFIG_COLOR_DEPTH16) - if (i == 0 || i == (LCD_PANEL_WIDTH - 1) || j == 0 || j == (LCD_PANEL_HEIGHT - 1)) - *base++ = 0xFFFFu; - else - *base++ = 0x0000u; -#elif defined(CONFIG_COLOR_DEPTH24) - if (i == 0 || i == (LCD_PANEL_WIDTH - 1) || j == 0 || j == (LCD_PANEL_HEIGHT - 1)) - *base++ = 0x00FFFFFFu; - else - *base++ = 0x00000000u; -#else -#error "COLOR DEPTH not supported!" -#endif - } - } -} - -void drv_lcd_draw_bg(void) -{ - pixel_t *src = drv_lcd_bg; - pixel_t *dst = drv_lcd_fb; - - int i = 0; - while (i++ < LCD_PANEL_WIDTH * LCD_PANEL_HEIGHT) - *dst++ = *src++; -} - -static void _drv_lcd_init(void) -{ - OUT32(LCD_BASE + LCD_TIME0_OFFSET, LCD_TIME0); - OUT32(LCD_BASE + LCD_TIME1_OFFSET, LCD_TIME1); - OUT32(LCD_BASE + LCD_TIME2_OFFSET, LCD_TIME2); - OUT32(LCD_BASE + LCD_CTRL_OFFSET, LCD_CTRL); - - OUT32(LCD_BASE + LCD_BASE_OFFSET, drv_lcd_fb); -} - -void drv_lcd_draw_rect(int x, int w, int y, int h, int r, int g, int b) -{ - pixel_t *base = drv_lcd_fb; - - int i, j; - for (i = y; i < y + h; i++) - for (j = x; j < x + w; j++) -#if defined(CONFIG_COLOR_DEPTH16) - base[ i * LCD_PANEL_WIDTH + j] = (pixel_t)(((r >> 3) << 11) | ((g >> 2) << 5) | ((b >> 3) << 0)); -#elif defined(CONFIG_COLOR_DEPTH24) - base[ i * LCD_PANEL_WIDTH + j] = (pixel_t)((r << 16) | (g << 8) | b); -#endif - nds32_dcache_flush(); /* undefine CONFIG_CPU_DCACHE_WRITETHROUGH ,flush DCACHE for lcd screen */ -} - -void drv_lcd_erase_rect(int x, int w, int y, int h) -{ - pixel_t *base = drv_lcd_fb; - - int i, j; - for (i = y; i < y + h; i++) - for (j = x; j < x + w; j++) - base[ i * LCD_PANEL_WIDTH + j] = drv_lcd_bg[ i * LCD_PANEL_WIDTH + j]; -} - -void draw_blk(int x, int y, int sz, int border, int r, int g, int b) -{ - drv_lcd_draw_rect(x, sz, y, sz, r, g, b); - drv_lcd_draw_rect(x + border, sz - 2 * border, y + border, sz - 2 * border, r ^ 0xff, g ^ 0xff, b ^ 0xff); -} - -int drv_lcd_init(void) -{ - _drv_lcd_init(); - drv_lcd_fill_bg(); - drv_lcd_draw_bg(); - drv_lcd_flip(); - - return 0; -} diff --git a/bsp/AE210P/driver/lcd/lcd.h b/bsp/AE210P/driver/lcd/lcd.h deleted file mode 100644 index 31b997269b..0000000000 --- a/bsp/AE210P/driver/lcd/lcd.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __LCD_H__ -#define __LCD_H__ - -#include -#include "lcd-info.h" - -#if defined(CONFIG_COLOR_DEPTH16) - typedef uint16_t pixel_t; -#elif defined(CONFIG_COLOR_DEPTH24) - typedef uint32_t pixel_t; -#else - #error "Unsupported COLOR_DEPTH!" - typedef int pixel_t; -#endif - -extern void drv_lcd_flip(void); -extern pixel_t *drv_lcd_get_fb(void); -extern pixel_t *drv_lcd_get_bg(void); -extern void drv_lcd_get_param(int *width, int *height, int *bpp); -extern void drv_lcd_fill_bg(void); -extern void drv_lcd_draw_bg(void); -extern void drv_lcd_draw_rect(int x, int w, int y, int h, int r, int g, int b); -extern void drv_lcd_erase_rect(int x, int w, int y, int h); -extern void draw_blk(int x, int y, int sz, int border, int r, int g, int b); -extern int drv_lcd_init(void); - -extern void draw_font(int x, int y, int ascii); - -#endif /* __LCD_H__ */ diff --git a/bsp/AE210P/driver/osc/osc.c b/bsp/AE210P/driver/osc/osc.c deleted file mode 100644 index 91316ea889..0000000000 --- a/bsp/AE210P/driver/osc/osc.c +++ /dev/null @@ -1,74 +0,0 @@ -#include "hal.h" -#include "uart/uart.h" -#include "osc.h" -#include "os_except.h" - -#define osc_hisr_TASK_PRIORITY 31 // osc_hisr must be the highest priority task of all tasks. - -/* - ********************************************************************************************************* - * Overlay SRAM Controller (OSC) initialize - * - * Description : This function is called to initialize overlay SRAM controller, - * including setting upfixed region size and overlay region base. - * - * Arguments : - * - * Notes : - ********************************************************************************************************* - */ -void _osc_init(void) -{ - register unsigned int ovly_region_szie; - register unsigned int fix_regiion_size; - register unsigned int ovly_region_base_addr; - - /* Read the initial OSC overlay region size. */ - ovly_region_szie = (REG32(OSC_CTRL) & OSC_CTRL_OVL_SZ_MASK) >> 12; - - /* Initialize OSC fix region size */ - fix_regiion_size = OSC_EILM_SIZE - ovly_region_szie; - REG32(OSC_OVLFS) = fix_regiion_size; - - /* Initialize OSC overlay region to the end of all overlay text. */ - ovly_region_base_addr = fix_regiion_size + ovly_region_szie * _novlys; - REG32(OSC_OVLBASE) = ovly_region_base_addr; -} - -int _osc_drv_init(void (*handler)(unsigned int ipc), - void (*osc_hisr)(void *arg), - OSC_DRV_INFO *osc_info) -{ - hal_queue_t *queue = &osc_info->queue; - hal_thread_t *th = &osc_info->th; - - // Initial the Fixed/Overlap regions. - _osc_init(); - - // Register a user-define handler which is called from OSC exception handler. - register_exception_handler(GE_RESERVED_INST, handler); - - // Register a user-define hisr which will be woken up by lisr sending msg to queue. - th->fn = osc_hisr; - th->name = "bh_osc"; - th->stack_size = 0x400; - th->arg = queue; - th->prio = osc_hisr_TASK_PRIORITY; - th->task = NULL; - th->ptos = NULL; - - // Create a bottom half. - // The bottom half is a thread task with a sync queue. - queue->size = 1; - - if(hal_create_queue(queue) == HAL_FAILURE) - return HAL_FAILURE; - - if(hal_create_thread(th) != HAL_SUCCESS) - return HAL_FAILURE; - - puts("OSC driver init success!\n"); - - return HAL_SUCCESS; -} - diff --git a/bsp/AE210P/driver/osc/osc.h b/bsp/AE210P/driver/osc/osc.h deleted file mode 100644 index 898b392f9d..0000000000 --- a/bsp/AE210P/driver/osc/osc.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef __OSC_H__ -#define __OSC_H__ - -#include "hal.h" - -#define OVLY_SEG(NAME) __attribute__((section(#NAME))) - -/* - TYPES OF GENERAL EXCEPTION -*/ -#define GE_ALIGN_CHECK 0 -#define GE_RESERVED_INST 1 -#define GE_TRAP 2 -#define GE_ARITHMETIC 3 -#define GE_PRECISE_BUS_ERR 4 -#define GE_INPRECISE_BUS_ERR 5 -#define GE_COPROCESSOR 6 -#define GE_PRIVILEGE_INST 7 -#define GE_RESERVED_VALUE 8 -#define GE_NON_EXIST_LOCAL_MEM 9 -#define GE_MPZIU_CTRL 10 - -/* - structure of overlay control registers - Please define this structure based on your hardware design -*/ -typedef struct -{ - unsigned int reserved ; - unsigned int root_size ; - unsigned int base_addr ; - unsigned int end_addr ; - volatile unsigned int dma ; -} OVLY_REGS ; - -typedef struct -{ - unsigned long vma; - unsigned long size; - unsigned long lma; - unsigned long mapped; -} OVLY_TABLE ; - -typedef struct -{ - unsigned int ipc; - OVLY_REGS *povl; - -} OVL_CTRL; - -typedef struct { - - hal_queue_t queue; - hal_thread_t th; - - OVL_CTRL povl_ctrl; - -} OSC_DRV_INFO; - -/* _novlys from overlay table in linker script stands for number of overlay regions. */ -extern int _novlys; -extern OVLY_TABLE _ovly_table[] ; -extern char __ovly_lmastart_OVL_RAM; - -static volatile int overlay_busy = 0; - -void __attribute__((no_prologue)) osc_init(); -int _osc_drv_init(void (*handler)(unsigned int ipc), - void (*osc_hisr)(void *arg), - OSC_DRV_INFO *osc_info); - -#ifdef CONFIG_OSC_DEBUG_SUPPORT -#define OVLY_DEBUG -#endif - - -#endif diff --git a/bsp/AE210P/driver/sd/Kbuild b/bsp/AE210P/driver/sd/Kbuild deleted file mode 100644 index 2744f13dd1..0000000000 --- a/bsp/AE210P/driver/sd/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -lib-y += -lib-y += sdd.o -lib-y += sdd_sd.o diff --git a/bsp/AE210P/driver/sd/sd.h b/bsp/AE210P/driver/sd/sd.h deleted file mode 100644 index 3c7d9dc592..0000000000 --- a/bsp/AE210P/driver/sd/sd.h +++ /dev/null @@ -1,143 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sd.h - * - * DESCRIPTION - * - * SD controller driver interfaces for client applications. - * (Nucleus I/O Driver Architecture) - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * ag101regs.h - * ag101defs.h - * - ****************************************************************************/ -#ifndef __SD_H__ -#define __SD_H__ - -#include -/* - * SDD I/O control code, used for clients not using driver wrapper routines, - * i.e., when not using middle-ware interfaces. Driver implementation target - * is that almost every IOCTL should exist a corresponding wrapper routine. - */ -typedef enum SDD_IOCTL { - SDD_IOCTL_READ_SECTORS, /* Parameter: pointer to SDD_IOCTL_READ_SECTORS_PARAM struct */ - SDD_IOCTL_WRITE_SECTORS, /* Parameter: pointer to SDD_IOCTL_WRITE_SECTORS_PARAM struct */ -} SDD_IOCTL; - -/* Parameter struct for SDD_IOCTL_ */ -typedef struct _SDD_IOCTL_READ_SECTORS_PARAM { - - uint32_t lba_sector; /* start sector number */ - uint32_t sector_count; /* number of sectors included in this operation */ - uint32_t sector_size; /* sector size in bytes */ - void *io_buff; /* buffer pointer */ - -} SDD_IOCTL_READ_SECTORS_PARAM; - -typedef struct _SDD_IOCTL_WRITE_SECTORS_PARAM { - - uint32_t lba_sector; /* start sector number */ - uint32_t sector_count; /* number of sectors included in this operation */ - uint32_t sector_size; /* sector size in bytes */ - void *io_buff; /* buffer pointer */ - -} SDD_IOCTL_WRITE_SECTORS_PARAM; - -typedef enum SDD_EVENTS { - - SDD_EVENT_CD = 0x00000001, /* Card-detection event. Event parameter: SDD_CD_EVENT */ - -} SDD_EVENTS; - -typedef enum SDD_CD_EVENT_PARAM { - SDD_CD_CARD_INSERTED = 1, - SDD_CD_CARD_REMOVED = 0, - -} SDD_CD_EVENT_PARAM; - -typedef enum SDD_DMA_MODE { - SDD_DMA_NONE = 0, /* no dma, deivce i/o is through pio */ - SDD_DMA_DCH = 1, /* dma channel is dynamically allocated on i/o request and get free after dma. */ - SDD_DMA_SCH = 2, /* dma channel is allocated and occupied during device initialization. */ - -} SDD_DMA_MODE; - -/* Define data structures for management of CF device. */ -typedef struct SDD_DEVICE_STRUCT { - - void *bdev_id; /* (reserved) The block device context. This field is reserved by the driver. */ - uint8_t dma; /* (in) one of the enum value in SDD_DMA_MODE. */ - uint8_t func; /* (in) (Reserved currently) Preferred SD card function mode (SD Memory, SD/IO, SPI) */ - uint8_t padding[2]; /* stuff bytes */ - -} SDD_DEVICE; - -/***************************************************************************** - * Note: Everything below is designed as an interface wrapper to access - * SD driver. - * - * [Structures] - * - * [Functions] - * - * - ****************************************************************************/ - -/* driver generic error code for SDC */ -#define SDD_SUCCESS 0x00 -#define SDD_INVALID_INIT 0x01 -#define SDD_INVALID_REQUEST 0x02 -#define SDD_NOT_SUPPORTED 0x03 - -#define SDD_INVALID_FUNCTION 0x11 -#define SDD_INVALID_PARAMETER 0x12 -#define SDD_CARD_REMOVED 0x13 -#define SDD_INVALID_MEDIA 0x14 -#define SDD_INVALID_IOCTL 0x15 -#define SDD_WRITE_DATA_ERROR 0x16 -#define SDD_READ_DATA_ERROR 0x17 -#define SDD_INVLAID_ADDRESS 0x18 -#define SDD_INVLAID_ADDR_RANGE 0x19 - -#define SDD_CMD_TIMEOUT 0x21 -#define SDD_CMD_ERROR 0x22 -#define SDD_RSP_TIMEOUT 0x23 -#define SDD_RSP_CRC_ERROR 0x24 -#define SDD_NOT_SUPPORT_ACMD 0x25 -#define SDD_CSR_ERROR 0x26 -#define SDD_INVALID_STATE 0x27 -#define SDD_WAIT_TIMEOUT 0x28 -#define SDD_WRITE_PROTECTED 0x29 -#define SDD_CARD_LOCKED 0x30 - -extern void _sdd_lisr(int vector); -extern void _sdd_hisr(void *param); -extern uint32_t NDS_SD_Init(SDD_DEVICE * sdd_dev); -extern void NDS_SD_Unload(void); -extern uint32_t NDS_SD_ReadSectors(SDD_DEVICE * sdd_dev, uint32_t sector, - uint32_t sector_count, uint32_t sector_size, - void *buffer); -extern uint32_t NDS_SD_WriteSectors(SDD_DEVICE * sdd_dev, uint32_t sector, - uint32_t sector_count, uint32_t sector_size, - void *buffer); - -#endif /* __SD_H__ */ diff --git a/bsp/AE210P/driver/sd/sdd.c b/bsp/AE210P/driver/sd/sdd.c deleted file mode 100644 index 04239dca76..0000000000 --- a/bsp/AE210P/driver/sd/sdd.c +++ /dev/null @@ -1,2951 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sdd.c - * - * DESCRIPTION - * - * SD driver implementation. (Nucleus I/O Driver Architecture) - * - * SDC CONTROL LOGIC - * - * ------------------------------------------------------------------------- - * SDC controls <-> SDC Registers <-> SD In-Card Controller - * ------------------------------------------------------------------------- - * SD commands <-> SDC CMD/RSP reg <-> SD Command/Data Line - * ------------------------------------------------------------------------- - * SD data <-> SDC Data Window <-> SD Memory - * ------------------------------------------------------------------------- - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * sdd.h SD driver common header file - * - ****************************************************************************/ -#include "sdd.h" -#include "sdd_sd.h" -#include "../../library/ndsvfs/sys_arch.h" -#include "../../library/ndsvfs/include/ndsbdev.h" -#include "bsp_hal.h" - -static uint32_t sdd_hisr_stack[SDD_HISR_STACK_SIZE]; -/* driver context */ -static SDD_DATA sdd __attribute__ ((aligned(4))) = { 0}; -#if (SDD_VFS_SUPPORT) -// sdc block device context -static NDS_BDEV sdd_bdev __attribute__((aligned(4))) = {0}; -#endif // SDD_VFS_SUPPORT - -/***************************************************************************** - * FUNCTION - * - * _sdd_alloc_dma_channel - * - * DESCRIPTION - * - * - * This function allocate a dma channel for use of sd data transfer. - * - * NOTE - * - * - * INPUTS - * - * None - * - * OUTPUTS - * - * None - * - ****************************************************************************/ -static inline uint32_t _sdd_alloc_dma_channel(void) -{ - uint32_t status = HAL_SUCCESS; - - /* - * This is function is for code path simplification so it will not - * check validity of sdd struct again. - */ - - /* Try APB DMA first ... */ - - /* (in) DMAD_DMAC_AHB_CORE, DMAD_DMAC_APB_CORE */ - sdd.dma_ch.controller = DMAD_DMAC_APB_CORE; - - /* (in) Burst mode (0: no burst 1-, 1: burst 4- data cycles per dma cycle) */ - sdd.dma_ch.apbch_req.burst_mode = 0; - - /* (in) APBBR_DATAWIDTH_4(word), APBBR_DATAWIDTH_2(half-word), APBBR_DATAWIDTH_1(byte) */ - sdd.dma_ch.apbch_req.data_width = APBBR_DATAWIDTH_4; - - /* (in) APBBR_ADDRINC_xxx */ - sdd.dma_ch.apbch_req.src_addr_ctrl = APBBR_ADDRINC_FIXED; - - /* (in) APBBR_REQN_xxx (also used to help determine bus selection) */ - sdd.dma_ch.apbch_req.src_index = _dmad_get_reqn(sdd.dma_ch.controller, APB_SDC); - - /* (in) APBBR_ADDRINC_xxx */ - sdd.dma_ch.apbch_req.dst_addr_ctrl = APBBR_ADDRINC_I4X; - - /* (in) APBBR_REQN_xxx (also used to help determine bus selection) */ - sdd.dma_ch.apbch_req.dst_index = APBBR_REQN_NONE; - - status = _dmad_channel_alloc(&sdd.dma_ch, HAL_TRUE); - - if (status != HAL_SUCCESS) { - - if (status != HAL_ERR_UNAVAILABLE) - return status; - - /* Try AHB DMAC again for lucky ... */ - /* (in) DMAD_DMAC_AHB_CORE, DMAD_DMAC_APB_CORE */ - sdd.dma_ch.controller = DMAD_DMAC_AHB_CORE; - - /* (in) non-zero if src and dst have different clock domain */ - sdd.dma_ch.ahbch_req.sync = 1; - - /* (in) DMAC_CSR_CHPRI_0 (lowest) ~ DMAC_CSR_CHPRI_3 (highest) */ - sdd.dma_ch.ahbch_req.priority = DMAC_CSR_CHPRI_0; - - /* (in) non-zero to enable hardware handshake mode */ - sdd.dma_ch.ahbch_req.hw_handshake = 1; - - /* (in) DMAC_CSR_SIZE_1 ~ DMAC_CSR_SIZE_256 */ - sdd.dma_ch.ahbch_req.burst_size = DMAC_CSR_SIZE_1; - - /* (in) DMAC_CSR_WIDTH_8, DMAC_CSR_WIDTH_16, or DMAC_CSR_WIDTH_32 */ - sdd.dma_ch.ahbch_req.src_width = DMAC_CSR_WIDTH_32; - - /* (in) DMAC_CSR_AD_INC, DMAC_CSR_AD_DEC, or DMAC_CSR_AD_FIX */ - sdd.dma_ch.ahbch_req.src_addr_ctrl = DMAC_CSR_AD_FIX; - - /* (in) DMAC_REQN_xxx (also used to help determine channel number) */ - sdd.dma_ch.ahbch_req.src_index = DMAC_REQN_SDC; - - sdd.dma_ch.ahbch_req.src_reqn = _dmad_get_reqn(sdd.dma_ch.controller, AHB_SDC); - - /* (in) DMAC_CSR_WIDTH_8, DMAC_CSR_WIDTH_16, or DMAC_CSR_WIDTH_32 */ - sdd.dma_ch.ahbch_req.dst_width = DMAC_CSR_WIDTH_32; - - /* (in) DMAC_CSR_AD_INC, DMAC_CSR_AD_DEC, or DMAC_CSR_AD_FIX */ - sdd.dma_ch.ahbch_req.dst_addr_ctrl = DMAC_CSR_AD_INC; - - /* (in) DMAC_REQN_xxx (also used to help determine channel number) */ - sdd.dma_ch.ahbch_req.dst_index = DMAC_REQN_NONE; - sdd.dma_ch.ahbch_req.dst_reqn = AHB_REQN_NONE; - - status = _dmad_channel_alloc(&sdd.dma_ch, HAL_TRUE); - } - - SDD_TRACE(("sdd dma channel(%d) controller(%d)\r\n", - sdd.dma_ch.channel, sdd.dma_ch.controller)); - - return status; -} - -static inline void _sdd_free_dma_channel(void) -{ - _dmad_channel_free(&sdd.dma_ch); -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_cd_reset - * - * DESCRIPTION - * - * This function performs card-detection initialization and card remove - * clean-up tasks. - * - * NOTE - * - * - * INPUTS - * - * insert : non-zero to perform card-inserting tasks, zero for removing. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_cd_reset(uint8_t insert) -{ - uint32_t status = HAL_SUCCESS; /* Return status code */ - SD_R32 sd_rsp32; /* SD card command response 32-bit */ - SD_R128 sd_rsp128; /* SD card command response 128-bit */ - char *tmp_str; - uint32_t tmp_val; - - SDD_TRACE(("_sdd_cd_reset\r\n")); - /* ------------ */ - /* Reset host SDC */ - SETB32(SDC_CMD, SDC_SDC_RST_BIT); - while (GETB32(SDC_CMD, SDC_SDC_RST_BIT) != 0) ; - - /* Perform card removal tasks */ - if (insert != HAL_TRUE) { - /* Stop pending DMA ? */ - - /* Turn off SD bus power */ - CLRB32(SDC_PWR_CTL, SDC_SD_POWER_ON_BIT); - - /* Turn off SD bus clock */ - SETB32(SDC_CLK_CTL, SDC_CLK_DIS_BIT); - - /* Setup removed flag */ - sdd.card_desc.rca = 0; - -#if (SDD_VFS_SUPPORT) - // notify file system layer, if any ... - if (sdd_bdev.propagate_event != HAL_NULL) - sdd_bdev.propagate_event(&sdd_bdev, NDSBDEV_DEVICE_UNPLUG, HAL_NULL); -#endif // SDD_VFS_SUPPORT - return HAL_SUCCESS; - } - - /* ------------ */ - /* Turn on SD card power using default voltage level */ - SETB32(SDC_PWR_CTL, SDC_SD_POWER_ON_BIT); - _nds_kwait(0x1000); - - /* ------------ */ - /* Turn on SD bus clock, apply max freq-division value (smallest frequency) */ - OUT32(SDC_CLK_CTL, (SDC_CLK_ON << SDC_CLK_DIS_BIT) | - (SDC_CLK_SD << SDC_CLK_SD_BIT) | SDC_CLK_DIV_MASK); - - _nds_kwait(0x1000); - - SDD_TRACE(("power-on & clock-on!\r\n")); - - /* Perform card initialization & identification process */ - - /* Idle State -> Ready State */ - /* - CMD0 */ - SDD_TRACE(("CMD0\r\n")); - status = _sd_cmd0(); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* - CMD8 */ - SDD_TRACE(("CMD8\r\n")); - status = _sd_cmd8(SD_CMD8_MAKE_ARG(SD_VHS_2_7V_3_6V, SD_CMD8_DEFAULT_PTN), &sd_rsp32); - - if (status != HAL_SUCCESS) { - - if ((status != SDD_RSP_TIMEOUT) && (status != SDD_CMD_TIMEOUT)) - goto _err_exit; - - sdd.card_desc.version = SDD_SPEC_1XX; - } - else { - /* version 2.0 or later card */ - - /* validates CMD8 response */ - if ((SD_R7_GET_PTN(sd_rsp32) != 0xaa) || (SD_R7_GET_VHS(sd_rsp32) == 0x00)) { - - /* unusable card */ - status = SDD_INVALID_MEDIA; - goto _err_exit; - } - - sdd.card_desc.version = SDD_SPEC_200; - } - - /* - ACMD41 */ - SDD_TRACE(("ACMD41\r\n")); - { - uint32_t retry = 0; - uint32_t timeout = 1; - uint32_t sd_hcs = SD_HCS_SD; /* SD(0) or SDHC(1) for ACMD41 */ - - /* - * HCS should be 0 if CMD8 does not response. - * HCS is 1 if host supports SDHC (AG101 does not support SDHC). - */ - - if (sdd.card_desc.version == SDD_SPEC_200) - { - sd_hcs = SD_HCS_SDHC; - } - - /* issue ACMD41 to get OCR */ - while (retry++ < SD_ACMD41_MAX_RETRY_COUNT) { - - /* cases: */ - /* - v2.0 or latter SD memory card - voltage mismatch */ - /* - v1.x SD memory card */ - /* - not SD memory card */ - SDD_TRACE(("cmd55\r\n")); - - /* notify card we're going to send an ACMD, RCA is 0x00 in card's idle state */ - status = _sd_cmd55(0x00, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - if (SD_CSR_GET_APP_CMD(sd_rsp32) == 0) { - - /* error if card was not expecting ACMD */ - status = SDD_NOT_SUPPORT_ACMD; - goto _err_exit; - } - - SDD_TRACE(("acmd41\r\n")); - status = _sd_acmd41(SD_ACMD41_MAKE_ARG(sd_hcs), &sd_rsp32); - if (status != HAL_SUCCESS) { - - /* no response - not a SD memory card */ - goto _err_exit; - } - - /* Continue if the OCR power state is not ready yet */ - if (SD_OCR_GET_BUSY(sd_rsp32) == 1) { - - /* card power up status is ready */ - sdd.card_desc.card_ccs = - ((SD_OCR_GET_CCS(sd_rsp32) == SD_CCS_SDHC) ? SDD_CCS_SDHC : SDD_CCS_SD); - - sdd.card_desc.vdd_window = SD_OCR_GET_VDD(sd_rsp32); - - timeout = 0; - break; - } - } - - if (timeout) { - - /* - * unusable card - * - no compatible voltage range (go to inactive state) - * - timeout (no resposne or timeout) - */ - SDD_TRACE(("timeout!\r\n")); - status = SDD_INVALID_MEDIA; - goto _err_exit; - } - } - - /* Ready State -> Identification State */ - /* - CMD2 */ - SDD_TRACE(("CMD2\r\n")); - status = _sd_cmd2(&sd_rsp128); - if (status != HAL_SUCCESS) - goto _err_exit; - - sdd.card_desc.mfg_id = SD_CID_GET_MID(sd_rsp128); /* ID */ - - tmp_str = (char *)SD_CID_GET_OID_PTR(sd_rsp128); /* string */ - sdd.card_desc.oem_id[0] = tmp_str[0]; - sdd.card_desc.oem_id[1] = tmp_str[1]; - sdd.card_desc.oem_id[2] = 0x00; - - tmp_str = (char *)SD_CID_GET_PNM_PTR(sd_rsp128); /* string */ - sdd.card_desc.prod_name[0] = tmp_str[0]; - sdd.card_desc.prod_name[1] = tmp_str[1]; - sdd.card_desc.prod_name[2] = tmp_str[2]; - sdd.card_desc.prod_name[3] = tmp_str[3]; - sdd.card_desc.prod_name[4] = tmp_str[4]; - sdd.card_desc.prod_name[5] = 0x00; - - tmp_val = (uint32_t) SD_CID_GET_PRV(sd_rsp128); /* BCD */ - sdd.card_desc.prod_rev[0] = (char)((tmp_val >> 4) + 0x30); - sdd.card_desc.prod_rev[1] = (char)'.'; - sdd.card_desc.prod_rev[2] = (char)((tmp_val & 0x0f) + 0x30); - sdd.card_desc.prod_rev[3] = 0x00; - - sdd.card_desc.prod_sn = (uint32_t) SD_CID_GET_PSN(sd_rsp128); /* 32-bit word value */ - - tmp_val = (uint32_t) SD_CID_GET_MDT(sd_rsp128); /* 12-bit value */ - sdd.card_desc.mfg_year = (uint16_t) (tmp_val >> 4) + 2000; - sdd.card_desc.mfg_month = (uint16_t) (tmp_val & 0x0f); - - SDD_TRACE(("oem_id : 0x%081x\r\n", sdd.card_desc.oem_id)); - - SDD_TRACE(("prod_name : %s\r\n", sdd.card_desc.prod_name)); - - SDD_TRACE(("prod_rev : 0x%081x\r\n",sdd.card_desc.prod_rev)); - - SDD_TRACE(("prod_sn : 0x%08lx\r\n", sdd.card_desc.prod_sn)); - SDD_TRACE(("mfg_year : %d\r\n", sdd.card_desc.mfg_year)); - SDD_TRACE(("mfg_month : %d\r\n", sdd.card_desc.mfg_month)); - - /* Identification -> Standby State */ - - /* - CMD3 */ - SDD_TRACE(("CMD3\r\n")); - status = _sd_cmd3(&sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - if (SD_R6_GET_CSR_ERR(sd_rsp32)) { - - status = SDD_CMD_ERROR; - goto _err_exit; - } - - sdd.card_desc.rca = SD_R6_GET_RCA(sd_rsp32); - SDD_TRACE(("New RCA: 0x%08lx\r\n", sdd.card_desc.rca)); - - /* - * Get CSD register (Standby -> Standby) - * (Majorly we need the data access timing and SD bus clock) - */ - - /* - CMD9 */ - SDD_TRACE(("Get CSD (CMD9)\r\n")); - status = _sd_cmd9(sdd.card_desc.rca, &sd_rsp128); - if (status != HAL_SUCCESS) - goto _err_exit; - - tmp_val = SD_CSD_GET_CSD_STRUCTURE(sd_rsp128); - - SDD_TRACE(("CSD r0: 0x%08lx\r\n", sd_rsp128.r[0])); - SDD_TRACE(("CSD r1: 0x%08lx\r\n", sd_rsp128.r[1])); - SDD_TRACE(("CSD r2: 0x%08lx\r\n", sd_rsp128.r[2])); - SDD_TRACE(("CSD r3: 0x%08lx\r\n", sd_rsp128.r[3])); - - { - static uint32_t taac_tu2ns[] = { - /* - * Note: Due to minimum is 1, taac did not divided by 10 initially. - * Values derived from this taac has to be divided by 10. - */ - 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 - }; - - static uint32_t ts_tu2bps[] = { - /* - * Note: Reserved index (4~7) will map to 0, - * others are divided by 10 to avoid floating point operation. - */ - 1000, 100000, 1000000, 10000000, 0, 0, 0, 0 - }; - - static uint32_t taac_ts_tv2flt[] = { - /* - * Note: Reserved index (0) will map to 0, - * other value are multiplied with 10 to avoid floating point operation. - */ - 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, - 70, 80 - }; - - if (tmp_val == 0x00) { - - /* Standard SD */ - float sdc_clk_ns; /* SDC to card bus clock */ - float sdc_read_to_ns, sdc_write_to_ns; /* read/write timeout (ns) */ - - SDD_TRACE(("CSD v1.0\r\n")); - SDD_TRACE(("taac : 0x%08lx\r\n", SD_CSD_GET_TAAC(sd_rsp128))); - SDD_TRACE(("nsac : 0x%08lx\r\n", SD_CSD_GET_NSAC(sd_rsp128))); - - /* CSD structure version */ - sdd.card_desc.csd_ver = 0x01; - - /* obtain card maximum transfer speed (bps) */ - tmp_val = SD_CSD_GET_TRAN_SPEED(sd_rsp128); - - sdd.card_desc.max_dataline_rate = - (taac_ts_tv2flt[SD_TRAN_SPEED_TV(tmp_val)] * - ts_tu2bps[SD_TRAN_SPEED_TU(tmp_val)]); - - SDD_TRACE(("line_speed : 0x%08lx (bps)\r\n", sdd.card_desc.max_dataline_rate)); - - /* AG101 SDC transfer speed limits */ - - // if (sdd.card_desc.max_dataline_rate > 25000000) - // sdd.card_desc.max_dataline_rate = 25000000; - - /* - * assume we would like to reach the maximum transfer speed, - * backward derive SDC_CLK_DIC ... - */ - sdd.card_desc.sdc_clk_div = - MB_PCLK / (sdd.card_desc.max_dataline_rate << 1); - if (sdd.card_desc.sdc_clk_div > 0) - sdd.card_desc.sdc_clk_div -= 1; - - /* obtain real SDC clock frequency */ - sdd.card_desc.sdc_clk_freq = - MB_PCLK / ((sdd.card_desc.sdc_clk_div + 1) << 1); - - /* - * obtain card read access time 1 (TAAC, ns) - * note that this is 10x value, use of taac has to be divide by 10. - */ - tmp_val = SD_CSD_GET_TAAC(sd_rsp128); - - sdd.card_desc.async_access_time = - taac_ts_tv2flt[SD_TAAC_TV(tmp_val)] * - taac_tu2ns[SD_TAAC_TU(tmp_val)]; - - /* obtain card read access time 2 (NSAC * 100, clocks) */ - sdd.card_desc.read_access_clks = SD_CSD_GET_NSAC(sd_rsp128) * 100; /* (NSAC * 100) Hz */ - - /* obtain programming time multiplication factor */ - sdd.card_desc.prog_factor = (1 << SD_CSD_GET_R2W_FACTOR(sd_rsp128)); - - /* obtain total read (TAAC + NSAC) & write (R2W * read) access timeout (x100) */ - sdc_clk_ns = 1000000000.0f / (float)sdd.card_desc.sdc_clk_freq; /* SDC clock period (ns) */ - sdc_read_to_ns = - (float)sdd.card_desc.read_access_clks * sdc_clk_ns * 100.0f + - (float)sdd.card_desc.async_access_time * 10.0f; - - sdc_write_to_ns = (float)sdd.card_desc.prog_factor * sdc_read_to_ns; - - /* obtain read and write timeout value */ - /* read_timeout = min(100ms, 100 x read_access_time_ms) */ - if (sdc_read_to_ns > 100000000.0f) - sdc_read_to_ns = 100000000.0f; - - sdd.card_desc.read_timeout_clks = (uint32_t) (sdc_read_to_ns / sdc_clk_ns); - - /* write_timeout = min(100ms, 100 x write_access_time_ms) */ - if (sdc_write_to_ns > 100000000.0f) - sdc_write_to_ns = 100000000.0f; - - sdd.card_desc.write_timeout_clks = (uint32_t) (sdc_write_to_ns / sdc_clk_ns); - - /* command class support list */ - sdd.card_desc.cmd_class = SD_CSD_GET_CCC(sd_rsp128); - - /* read parameters */ - - /* should be 512, 1024, or 2048 */ - sdd.card_desc.max_read_block_len = (uint16_t) (1 << SD_CSD_GET_READ_BL_LEN(sd_rsp128)); - - /* should be 1 for SD memory card */ - sdd.card_desc.partial_block_read = (uint8_t) SD_CSD_GET_READ_BL_PARTIAL(sd_rsp128); - sdd.card_desc.read_block_misalign = (uint8_t) SD_CSD_GET_READ_BLK_MISALIGN(sd_rsp128); /* 0 or 1 */ - - /* write parameters */ - sdd.card_desc.max_write_block_len = (uint16_t) (1 << SD_CSD_GET_WRITE_BL_LEN(sd_rsp128)); /* should be same as read-block size in SD memory card */ - sdd.card_desc.partial_block_write = (uint8_t) SD_CSD_GET_WRITE_BL_PARTIAL(sd_rsp128); /* 0 or 1 */ - sdd.card_desc.write_block_misalign = (uint8_t) SD_CSD_GET_WRITE_BLK_MISALIGN(sd_rsp128); /* 0 or 1 */ - - /* erase parameters */ - sdd.card_desc.erase_single_block = (uint8_t) SD_CSD_GET_ERASE_BLK_EN(sd_rsp128); /* 0 or 1 */ - sdd.card_desc.erase_sector_size = (uint8_t) SD_CSD_GET_SECTOR_SIZE(sd_rsp128); /* 0~127 means 1~128 number of write block size */ - sdd.card_desc.file_format = (uint8_t) SD_CSD_GET_FILE_FORMAT(sd_rsp128); - - /* write protect parameters */ - sdd.card_desc.wp_group_size = (uint8_t) SD_CSD_GET_WP_GRP_SIZE(sd_rsp128); /* 0~127 means 1~128 number of erase sector size */ - sdd.card_desc.wp_group_enable = (uint8_t) SD_CSD_GET_WP_GRP_ENABLE(sd_rsp128); /* 0 or 1 */ - sdd.card_desc.wp_permanent = (uint8_t) SD_CSD_GET_PERM_WRITE_PROTECT(sd_rsp128); /* 0 or 1 */ - sdd.card_desc.wp_temp = (uint8_t) SD_CSD_GET_TMP_WRITE_PROTECT(sd_rsp128); /* 0 or 1 */ - - /* other parameters */ - sdd.card_desc.copy = (uint8_t) SD_CSD_GET_COPY(sd_rsp128); /* 0 or 1 */ - sdd.card_desc.dsr_imp = (uint8_t) SD_CSD_GET_DSR_IMP(sd_rsp128); /* 0 or 1 */ - - /* card capacity parameters */ - sdd.card_desc.c_size = (uint32_t) SD_CSD1_GET_C_SIZE(sd_rsp128); /* 12-bit value */ - sdd.card_desc.c_size_mult = (uint32_t) SD_CSD1_GET_C_SIZE_MULT(sd_rsp128); /* 3-bit value */ - - /* calculate card capacity of user data (unit of 512-bytes) */ - sdd.card_desc.card_capacity = - ((sdd.card_desc.c_size + - 1) * (1 << (sdd.card_desc.c_size_mult + 2))) >> 9; - sdd.card_desc.card_capacity *= - sdd.card_desc.max_read_block_len; - } - else if (tmp_val == 0x01) { - /* SDHC (or Standard SD with CSD 2.0?) */ - /*static uint32_t soc_pclk = 50000000; // (assume PCLK 50M) todo: fix it! */ - float sdc_clk_ns; - - SDD_TRACE(("CSD v2.0\r\n")); - SDD_TRACE(("taac(r/o) : 0x%08lx\r\n", - SD_CSD_GET_TAAC(sd_rsp128))); - SDD_TRACE(("nsac(r/o) : 0x%08lx\r\n", - SD_CSD_GET_NSAC(sd_rsp128))); - - /* CSD structure version */ - sdd.card_desc.csd_ver = 0x02; - - /* obtain card maximum transfer speed (bps) */ - tmp_val = SD_CSD_GET_TRAN_SPEED(sd_rsp128); /* same as 1.0 */ - sdd.card_desc.max_dataline_rate = - (taac_ts_tv2flt[SD_TRAN_SPEED_TV(tmp_val)] * - ts_tu2bps[SD_TRAN_SPEED_TU(tmp_val)]); - SDD_TRACE(("line_speed : 0x%08lx (bps)\r\n", - sdd.card_desc.max_dataline_rate)); - - /* AG101 SDC transfer speed limits */ - // if (sdd.card_desc.max_dataline_rate > 25000000) - // sdd.card_desc.max_dataline_rate = 25000000; - - /* - * assume we would like to reach the maximum transfer speed, - * backward derive SDC_CLK_DIC ... - */ - sdd.card_desc.sdc_clk_div = - MB_PCLK / (sdd.card_desc.max_dataline_rate << 1); - if (sdd.card_desc.sdc_clk_div > 0) - sdd.card_desc.sdc_clk_div -= 1; - - /* obtain real SDC clock frequency */ - sdd.card_desc.sdc_clk_freq = - MB_PCLK / ((sdd.card_desc.sdc_clk_div + 1) << 1); - - /* obtain card read access time 1 (TAAC, ns) */ - /* note that this is 10x value, use of taac has to be divide by 10. */ - - // tmp_val = SD_CSD_GET_TAAC(sd_rsp128); - // sdd.card_desc.async_access_time = - // taac_ts_tv2flt[SD_TAAC_TV(tmp_val)] * taac_tu2ns[SD_TAAC_TU(tmp_val)]; - - /* obtain card read access time 2 (NSAC * 100, clocks) */ - // sdd.card_desc.read_access_clks = SD_CSD_GET_NSAC(sd_rsp128) * 100; // (NSAC * 100) Hz */ - - /* obtain programming time multiplication factor */ - sdd.card_desc.prog_factor = (1 << SD_CSD_GET_R2W_FACTOR(sd_rsp128)); /* should be 4 */ - - /* obtain total read (TAAC + NSAC) & write (R2W * read) access timeout (x100) */ - sdc_clk_ns = 1000000000.0f / (float)sdd.card_desc.sdc_clk_freq; /* SDC clock period (ns) */ - - /* obtain read and write timeout value */ - sdd.card_desc.read_timeout_clks = (uint32_t) (100000000.0f / sdc_clk_ns); /* 100ms according to spec 2.0 */ - sdd.card_desc.write_timeout_clks = (uint32_t) (250000000.0f / sdc_clk_ns); /* 250ms according to spec 2.0 */ - - /* command class support list */ - sdd.card_desc.cmd_class = SD_CSD_GET_CCC(sd_rsp128); /* same as 1.0 */ - - /* read parameters */ - sdd.card_desc.max_read_block_len = (uint16_t) (1 << SD_CSD_GET_READ_BL_LEN(sd_rsp128)); /* should be 512 bytes */ - sdd.card_desc.partial_block_read = (uint8_t) SD_CSD_GET_READ_BL_PARTIAL(sd_rsp128); /* should be 0 */ - sdd.card_desc.read_block_misalign = (uint8_t) SD_CSD_GET_READ_BLK_MISALIGN(sd_rsp128); /* should be 0 */ - - /* write parameters */ - sdd.card_desc.max_write_block_len = (uint16_t) (1 << SD_CSD_GET_WRITE_BL_LEN(sd_rsp128)); /* should be 512 bytes */ - sdd.card_desc.partial_block_write = (uint8_t) SD_CSD_GET_WRITE_BL_PARTIAL(sd_rsp128); /* should be 0 */ - sdd.card_desc.write_block_misalign = (uint8_t) SD_CSD_GET_WRITE_BLK_MISALIGN(sd_rsp128); /* should be 0 */ - - /* erase parameters */ - sdd.card_desc.erase_single_block = (uint8_t) SD_CSD_GET_ERASE_BLK_EN(sd_rsp128); /* should be 1 */ - sdd.card_desc.erase_sector_size = (uint8_t) SD_CSD_GET_SECTOR_SIZE(sd_rsp128); /* should be 64 KBytes (not relate to erase) */ - sdd.card_desc.file_format = (uint8_t) SD_CSD_GET_FILE_FORMAT(sd_rsp128); /* should be 0 */ - - /* write protect parameters */ - sdd.card_desc.wp_group_size = (uint8_t) SD_CSD_GET_WP_GRP_SIZE(sd_rsp128); /* should be 0 */ - sdd.card_desc.wp_group_enable = (uint8_t) SD_CSD_GET_WP_GRP_ENABLE(sd_rsp128); /* should be 0 */ - sdd.card_desc.wp_permanent = (uint8_t) SD_CSD_GET_PERM_WRITE_PROTECT(sd_rsp128); /* same as 1.0 */ - sdd.card_desc.wp_temp = (uint8_t) SD_CSD_GET_TMP_WRITE_PROTECT(sd_rsp128); /* same as 1.0 */ - - /* other parameters */ - sdd.card_desc.copy = (uint8_t) SD_CSD_GET_COPY(sd_rsp128); /* same as 1.0 */ - sdd.card_desc.dsr_imp = (uint8_t) SD_CSD_GET_DSR_IMP(sd_rsp128); /* same as 1.0 */ - - /* card capacity parameters */ - sdd.card_desc.c_size = - (uint32_t) SD_CSD2_GET_C_SIZE(sd_rsp128); - - /* calculate card capacity of user data (unit of 512-bytes) */ - sdd.card_desc.card_capacity = sdd.card_desc.c_size + 1; /* (c_size + 1) * 512 / 512 (KBytes) */ - sdd.card_desc.card_capacity *= - sdd.card_desc.max_read_block_len; - } - else { - SDD_TRACE(("Unknown CSD version!\r\n")); - - sdd.card_desc.csd_ver = 0x00; - status = SDD_INVALID_MEDIA; - goto _err_exit; - } - } - - SDD_TRACE(("card_capacity: 0x%08lx (KB)\r\n", sdd.card_desc.card_capacity)); - SDD_TRACE(("clk_div: 0x%08lx\r\n", sdd.card_desc.sdc_clk_div)); - SDD_TRACE(("clk_freq: %d Hz\r\n", sdd.card_desc.sdc_clk_freq)); - SDD_TRACE(("read_timeout_clks: 0x%08lx\r\n", sdd.card_desc.read_timeout_clks)); - SDD_TRACE(("write_timeout_clks: 0x%08lx\r\n", sdd.card_desc.write_timeout_clks)); - - /* ------------ */ - /* Now we know how to setup SD bus clock for maximum data transfer rate ... */ - OUT32(SDC_CLK_CTL, (SDC_CLK_ON << SDC_CLK_DIS_BIT) | (SDC_CLK_SD << SDC_CLK_SD_BIT) | - ((sdd.card_desc.sdc_clk_div << SDC_CLK_DIV_SHIFT) & SDC_CLK_DIV_MASK)); - _nds_kwait(0x1000); - - /* ------------ */ - /* - * Get SCR register (Standby -> Transfer -> Standby) - * (Majorly we need the data bus width) - */ - SDD_TRACE(("Get SCR\r\n")); - status = _sd_select_card(sdd.card_desc.rca); /* standby -> transfer */ - if (status != HAL_SUCCESS) - goto _err_exit; - - /* - * send SD command to setup read-block-size - * (SD memory card read block size could smaller than 512) - */ - SDD_TRACE(("cmd16\r\n")); - status = _sd_cmd16(8, &sd_rsp32); /* read 64 bits data */ - if (status != HAL_SUCCESS) - goto _err_exit; - - /* set SDC data timeout register */ - // OUT32(SDC_DATA_TIMER, 0xffffffff); /* use sdd.card_desc.read_timeout_clks ? */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.read_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, 8); /* read 64 bits data */ - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | ((3 << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^3 = 8 bytes */ - - /* send SD command to readback SCR register */ - SDD_TRACE(("cmd55\r\n")); - status = _sd_cmd55(sdd.card_desc.rca, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("acmd51\r\n")); - status = _sd_acmd51(&sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* pio-mode read-back */ - tmp_val = 0; - while (tmp_val++ < SD_READ_MAX_RETRY_COUNT) { - - uint32_t sdc_status = IN32(SDC_STATUS); - - if (sdc_status & (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK | SDC_SR_DATA_CRC_FAIL_MASK)) { - - status = SDD_READ_DATA_ERROR; - goto _err_exit; - } - - if (sdc_status & (SDC_SR_FIFO_ORUN_MASK | SDC_SR_DATA_END_MASK)) - break; - } - - /* ACMD51/ACMD13 data are MSB first (big-endian) */ - sd_rsp128.r[3] = IN32(SDC_DATA_WIN); /* [63:32] BE */ - sd_rsp128.r[2] = IN32(SDC_DATA_WIN); /* [31:00] BE */ - - /* reorder byte endian inside the 32-bit word */ - sd_rsp128.b[0] = sd_rsp128.b[11]; - sd_rsp128.b[1] = sd_rsp128.b[10]; - sd_rsp128.b[2] = sd_rsp128.b[9]; - sd_rsp128.b[3] = sd_rsp128.b[8]; - sd_rsp128.b[4] = sd_rsp128.b[15]; - sd_rsp128.b[5] = sd_rsp128.b[14]; - sd_rsp128.b[6] = sd_rsp128.b[13]; - sd_rsp128.b[7] = sd_rsp128.b[12]; - - sdd.card_desc.scr_ver = (uint8_t) SD_SCR_GET_SCR_STRUCTURE(sd_rsp128); - sdd.card_desc.spec_ver = (uint8_t) SD_SCR_GET_SD_SPEC(sd_rsp128); - sdd.card_desc.erase_val = (uint8_t) SD_SCR_GET_DATA_STAT_AFTER_ERASE(sd_rsp128); - sdd.card_desc.security_ver = (uint8_t) SD_SCR_GET_SD_SECURITY(sd_rsp128); - sdd.card_desc.bus_width = (uint8_t) SD_SCR_GET_SD_BUS_WIDTHS(sd_rsp128); - - SDD_TRACE(("lw : 0x%08lx\r\n", sd_rsp128.r[2])); - SDD_TRACE(("hw : 0x%08lx\r\n", sd_rsp128.r[3])); - SDD_TRACE(("SCR_ver : 0x%08lx\r\n", sdd.card_desc.scr_ver)); - SDD_TRACE(("spec_ver : 0x%08lx\r\n", sdd.card_desc.spec_ver)); - SDD_TRACE(("erase_val: 0x%08lx\r\n", sdd.card_desc.erase_val)); - SDD_TRACE(("secu_ver : 0x%08lx\r\n", sdd.card_desc.security_ver)); - SDD_TRACE(("bus_width: 0x%08lx\r\n", sdd.card_desc.bus_width)); - - if ((IN32(SDC_BUS_WIDTH) & SDC_WIDE_BUS_SUPPORT_MASK) && - (sdd.card_desc.bus_width & 0x04)) { - - SDD_TRACE(("SDC configured to wide bus!\r\n")); - - SDD_TRACE(("cmd55\r\n")); - status = _sd_cmd55(sdd.card_desc.rca, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("acmd6\r\n")); - status = _sd_acmd6(SD_ACMD6_MAKE_ARG(SD_BUS_WIDTH_ARG_4BIT), &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("sdc_bus_width\r\n")); - OUT32(SDC_BUS_WIDTH, SDC_WIDE_BUS_SUPPORT_MASK | SDC_WIDE_BUS_MASK); - } - else { - SDD_TRACE(("SDC configured to single bus!\r\n")); - - SDD_TRACE(("cmd55\r\n")); - status = _sd_cmd55(sdd.card_desc.rca, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("acmd6\r\n")); - status = _sd_acmd6(SD_ACMD6_MAKE_ARG(SD_BUS_WIDTH_ARG_1BIT), &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - OUT32(SDC_BUS_WIDTH, SDC_WIDE_BUS_SUPPORT_MASK | SDC_SINGLE_BUS_MASK); - } - - /* transfer -> standby */ - // status = _sd_deselect_card(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) - // goto _err_exit; - - /* - * Turn on SD card power using voltage level obtained from card OCR - * todo: use default? flib doesn't setup voltage value? - */ - // SETB32(SDC_PWR_CTL, SDC_SD_POWER_ON_BIT); - // _nds_kwait(0x1000); - - return HAL_SUCCESS; - -_err_exit: - - SDD_TRACE(("_err_exit!\r\n")); - - /* Turn off SD bus power */ - CLRB32(SDC_PWR_CTL, SDC_SD_POWER_ON_BIT); - - /* Turn off SD bus clock */ - SETB32(SDC_CLK_CTL, SDC_CLK_DIS_BIT); - - /* Setup removed flag */ - sdd.card_desc.rca = 0; -#if (SDD_VFS_SUPPORT) - // notify file system layer, if any ... - if (sdd_bdev.propagate_event != HAL_NULL) - sdd_bdev.propagate_event(&sdd_bdev, NDSBDEV_DEVICE_UNPLUG, HAL_NULL); -#endif // SDD_VFS_SUPPORT - - return status; -} - -#if 0 -/***************************************************************************** - * FUNCTION - * - * _sdd_read_sector_pio - * - * DESCRIPTION - * - * This function performs a sector of data PIO transfer from the SD memory - * card. - * - * NOTE - * - * - * INPUTS - * - * sector : - * sector_cnt : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sdd_read_sector_pio(uint32_t sector, uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - uint32_t sdc_status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - uint32_t word_cnt; - uint32_t fifo_depth; - - SDD_TRACE(("\r\n_sdd_read_sector_pio\r\n")); - - if (sector > (sdd.card_desc.card_capacity << 1)) { - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - /* todo: sector size */ - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* send SD command to setup read-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.read_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to readback data */ - SDD_TRACE(("- cmd17\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd17(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd17(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("- wait until card is sending out data\r\n")); - _nds_kwait(0x1000); /* hw need delay ? */ - /*status = _sd_wait_sending_state(sdd.card_desc.rca); */ - /*if (status != HAL_SUCCESS) */ - /* goto _err_exit; */ - - SDD_TRACE(("- read back data\r\n")); - - /* per 32-bit word read back */ - word_cnt = SDD_SECTOR_SIZE >> 2; - while (word_cnt > 0) { - retry = 0; - while (retry++ < SD_READ_MAX_RETRY_COUNT) { - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK - | SDC_SR_DATA_CRC_FAIL_MASK)) { - SDD_TRACE(("- data error/timeout or card removed, sdc_status: 0x%08lx\r\n", sdc_status)); - status = SDD_READ_DATA_ERROR; - goto _err_exit; - } - if (sdc_status & - (SDC_SR_FIFO_ORUN_MASK | SDC_SR_DATA_END_MASK)) { - SETB32(SDC_CLEAR, SDC_FIFO_ORUN_BIT); - retry = 0xffffffff; /* success */ - break; - } - } - - if (retry != 0xffffffff) { - /* wait data timeout */ - SDD_TRACE(("- timeout, sdc_status: 0x%08lx\r\n", - sdc_status)); - status = SDD_READ_DATA_ERROR; - goto _err_exit; - } - - fifo_depth = SDC_FIFO_WORD_DEPTH; - while (fifo_depth-- > 0) { - /* CMD17/18/24/25 ACMD18/25 data are LSB first (little-endian) */ - *((uint32_t *) io_buff) = IN32(SDC_DATA_WIN); /* just mem-move so no data endian issue. */ - - io_buff += 4; - if (--word_cnt == 0) - break; - } - } - - SDD_TRACE(("- data read completed\r\n")); - return HAL_SUCCESS; - -_err_exit: - - SDD_TRACE(("- error on data read\r\n")); - return status; -} -#endif - -/***************************************************************************** - * FUNCTION - * - * _sdd_read_sectors_pio - * - * DESCRIPTION - * - * This function performs PIO data transfer from the SD memory card in - * multiple unit of sectors. - * - * NOTE - * - * - * INPUTS - * - * sector : - * sector_cnt : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_read_sectors_pio(uint32_t sector, uint32_t sector_cnt, - uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - uint32_t sdc_status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - uint32_t word_cnt; - uint32_t fifo_depth; - - SDD_TRACE(("\r\n_sdd_read_sectors_pio\r\n")); - - if (sector > (sdd.card_desc.card_capacity << 1)) { - - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - if ((sector_cnt == 0) || (((sector + sector_cnt) > (sdd.card_desc.card_capacity << 1)))) { - - SDD_TRACE(("Invalid sector address range!\r\n")); - return SDD_INVLAID_ADDR_RANGE; - } - - /* todo: sector size */ - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* send SD command to setup read-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.read_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, sector_cnt * SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to readback data */ - SDD_TRACE(("- cmd18\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd18(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd18(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("- wait until card is sending out data\r\n")); - _nds_kwait(0x1000); /* hw need delay ? */ - - /* This method will dirty SDC_STATUS so not been used. */ - // status = _sd_wait_sending_state(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) - // goto _err_exit; - - /* per sector PIO read back */ - OUT32(SDC_CLEAR, 0x3ff); - SDD_TRACE(("- read back data\r\n")); - while (sector_cnt-- > 0) { - - /* per 32-bit word read back */ - word_cnt = SDD_SECTOR_SIZE >> 2; - while (word_cnt > 0) { - retry = 0; - while (retry++ < SD_READ_MAX_RETRY_COUNT) { - - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | - SDC_SR_DATA_TIMEOUT_MASK | - SDC_SR_DATA_CRC_FAIL_MASK)) { - SDD_TRACE(("- data error/timeout or card removed, sdc_status: 0x%08lx\r\n", sdc_status)); - status = SDD_READ_DATA_ERROR; - goto _err_exit; - } - if (sdc_status & (SDC_SR_FIFO_ORUN_MASK | SDC_SR_DATA_END_MASK)) { - - retry = 0xffffffff; /* success */ - break; - } - } - - if (retry != 0xffffffff) { - - /* wait data timeout */ - SDD_TRACE(("- timeout, sdc_status: 0x%08lx\r\n", sdc_status)); - status = SDD_READ_DATA_ERROR; - goto _err_exit; - } - - fifo_depth = SDC_FIFO_WORD_DEPTH; - SETB32(SDC_CLEAR, SDC_FIFO_ORUN_BIT); - while (fifo_depth-- > 0) { - - /* CMD17/18/24/25 ACMD18/25 data are LSB first (little-endian) */ - *((uint32_t *) io_buff) = IN32(SDC_DATA_WIN); /* just mem-move so no data endian issue. */ - - io_buff += 4; - if (--word_cnt == 0) - break; - } - } - } - - _nds_kwait(0x1000); /* hw need delay ? */ - - /* Stop data transmission */ - SDD_TRACE(("- stop transmission\r\n")); - status = _sd_stop_transmission(sdd.card_desc.rca); - /* FIXME this part is marked for qemu */ -#if 0 - if (status != HAL_SUCCESS) - goto _err_exit; -#endif - SDD_TRACE(("- data read completed\r\n")); - return HAL_SUCCESS; - -_err_exit: - - SDD_TRACE(("- error on data read! status(0x%08lx)\r\n", status)); - return status; -} - -extern int dmad_apb_config_dir(const DMAD_CHANNEL_REQUEST_DESC *ch_req, uint8_t dir); -/***************************************************************************** - * FUNCTION - * - * _sdd_read_sectors_dma - * - * DESCRIPTION - * - * This function performs DMA data transfer from the SD memory card in - * multiple unit of sectors. - * - * NOTE - * - * - * INPUTS - * - * sector : - * sector_cnt : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_read_sectors_dma(uint32_t sector, uint32_t sector_cnt, - uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - SD_R32 sd_rsp32; - DMAD_DRB *drb; - - SDD_TRACE(("\r\n_sdd_read_sectors_dma\r\n")); - if (sector > (sdd.card_desc.card_capacity << 1)) { - - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - if ((sector_cnt == 0) || (((sector + sector_cnt) > (sdd.card_desc.card_capacity << 1)))) { - - SDD_TRACE(("Invalid sector address range!\r\n")); - return SDD_INVLAID_ADDR_RANGE; - } - /* todo: sector size */ - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* send SD command to setup read-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.read_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, sector_cnt * SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | SDC_DMA_EN_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to readback data */ - SDD_TRACE(("- cmd18\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd18(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd18(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _safe_exit; - - SDD_TRACE(("- wait until card is sending out data\r\n")); - // _nds_kwait(0x1000); /* hw need delay ? */ - - /* This method will dirty SDC_STATUS so not been used. */ - // status = _sd_wait_sending_state(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) - // goto _err_exit; - - /* per sector DMA read back */ - /* CMD17/18/24/25 ACMD18/25 data are LSB first (little-endian) */ - SDD_TRACE(("- read back data\r\n")); - - dmad_apb_config_dir(&sdd.dma_ch,DMAD_DIR_A0_TO_A1); - - while (sector_cnt-- > 0) { - - status = _dmad_alloc_drb(&sdd.dma_ch, &drb); - if (status != HAL_SUCCESS) - goto _safe_exit; - - drb->src_addr = (void *)SDC_DATA_WIN; - drb->dst_addr = (void *)io_buff; - drb->req_size = SDD_SECTOR_SIZE >> 2; /* multiple counts of transfer width */ - - if (sector_cnt == 0) - drb->completion_sem = &sdd.dma_sem; - - /* Submit DRB */ - status = _dmad_submit_request(&sdd.dma_ch, drb); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* Point to next buffer location */ - io_buff += SDD_SECTOR_SIZE; - } - - /* Wait DMA completion */ - /* - method 1: sync with semaphore */ - /* - method 2: check SDC status register SDC_STATUS[7] */ - if (1){ - - DEBUG(0, 1, "- wait dma completion ...\n"); - status = hal_pend_semaphore(&sdd.dma_sem, 300); - - if (status == HAL_ERR_TIMEOUT) { - - DEBUG(1, 1, "- wait dma completion timeout (might not an error)\n"); - goto _safe_exit; - } - else if (status != HAL_SUCCESS) { - - DEBUG(1, 1, "- wait dma completion failed! (0x%08lx)\n", status); - goto _safe_exit; - } - } - else { - uint32_t retry = 0; - uint32_t sdc_status; - - SDD_TRACE(("- polling dma completion status ...\r\n")); - while (retry++ < SD_READ_MAX_RETRY_COUNT) { - - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK - | SDC_SR_DATA_CRC_FAIL_MASK)) { - - SDD_TRACE(("- data error/timeout or card removed, sdc_status: 0x%08lx\r\n", sdc_status)); - status = SDD_READ_DATA_ERROR; - break; /* todo: report error to upper layer? */ - } - if (sdc_status & (SDC_SR_FIFO_ORUN_MASK | SDC_SR_DATA_END_MASK)) { - - SETB32(SDC_CLEAR, SDC_FIFO_ORUN_BIT); - retry = 0xffffffff; /* success */ - break; - } - } - } - - /* Stop data transmission anyway after waiting. */ - SDD_TRACE(("- stop transmission\r\n")); - status = _sd_stop_transmission(sdd.card_desc.rca); - /* FIXME this part is marked for qemu */ -#if 0 - if (status != HAL_SUCCESS) - goto _safe_exit; -#endif - status = HAL_SUCCESS; -_safe_exit: - -#if (SDD_DEBUG_TRACE) - if (status == HAL_SUCCESS) - SDD_TRACE(("- data read completed\r\n")); - else - SDD_TRACE(("- error on data read\r\n")); -#endif /* SDD_DEBUG_TRACE */ - - return status; -} - -#if 0 -/***************************************************************************** - * FUNCTION - * - * _sdd_write_sector_pio - * - * DESCRIPTION - * - * This function performs a sector of data PIO transfer to the SD memory - * card. - * - * NOTE - * - * - * INPUTS - * - * sector : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sdd_write_sector_pio(uint32_t sector, uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - uint32_t sdc_status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - uint32_t word_cnt; - uint32_t fifo_depth; - - SDD_TRACE(("\r\n_sdd_write_sector_pio\r\n")); - - if (sector > (sdd.card_desc.card_capacity << 1)) { - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - if (GETB32(SDC_STATUS, SDC_SR_WRITE_PROT_BIT)) { - SDD_TRACE(("Card is write protected!\r\n")); - return SDD_WRITE_PROTECTED; - } - - /* todo: sector size */ - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* send SD command to setup write-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.write_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | SDC_DATA_WRITE_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to write data */ - SDD_TRACE(("- cmd24\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd24(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd24(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("- wait ready to write out data\r\n")); - _nds_kwait(0x1000); /* hw need delay ? */ - /*status = _sd_wait_receiving_state(sdd.card_desc.rca); // This method look not necessary for writing. */ - /*if (status != HAL_SUCCESS) */ - /* goto _err_exit; */ - - /* per sector PIO write out */ - SDD_TRACE(("- write out data\r\n")); - - /* clear SDC status bits before sending data */ - OUT32(SDC_CLEAR, SDC_CLEAR_ALL); - - /* per 32-bit word write out */ - word_cnt = SDD_SECTOR_SIZE >> 2; - while (word_cnt > 0) { - fifo_depth = SDC_FIFO_WORD_DEPTH; - while (fifo_depth-- > 0) { - /* CMD17/18/24/25 ACMD18/25 data are LSB first (little-endian) */ - OUT32(SDC_DATA_WIN, *((uint32_t *) io_buff)); /* just mem-move so no data endian issue. */ - - io_buff += 4; - if (--word_cnt == 0) - goto _complete_exit; - } - - retry = 0; - while (retry++ < SD_WRITE_MAX_RETRY_COUNT) { - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK - | SDC_SR_DATA_CRC_FAIL_MASK)) { - status = SDD_WRITE_DATA_ERROR; - goto _err_exit; - } - if (sdc_status & - (SDC_SR_FIFO_URUN_MASK | SDC_SR_DATA_END_MASK)) { - SETB32(SDC_CLEAR, SDC_FIFO_URUN_BIT); - retry = 0xffffffff; /* success */ - break; - } - } - - if (retry != 0xffffffff) { - /* wait data timeout */ - SDD_TRACE(("- timeout, sdc_status: 0x%08lx\r\n", - sdc_status)); - - /*SDD_TRACE(("- wait again by polling CSR\r\n")); */ - /*status = _sd_wait_receiving_state(sdd.card_desc.rca); */ - /*if (status != HAL_SUCCESS) */ - goto _err_exit; - - /*SDD_TRACE(("- card ready, sdc_status: 0x%08lx\r\n", IN32(SDC_STATUS))); */ - } - } - -_complete_exit: - - /* Wait host SDC shift-out FIFO data */ - SDD_TRACE(("- final check sdc_status\r\n")); - retry = 0; - while (retry++ < SD_WRITE_MAX_RETRY_COUNT) { - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK | - SDC_SR_DATA_CRC_FAIL_MASK)) { - status = SDD_WRITE_DATA_ERROR; - goto _err_exit; - } - if ((sdc_status == 0) || (sdc_status & SDC_SR_DATA_END_MASK)) { - break; - } - } - - SDD_TRACE(("- data write completed\r\n")); - return HAL_SUCCESS; - -_err_exit: - - SDD_TRACE(("- error on data write\r\n")); - return status; -} -#endif - -/***************************************************************************** - * FUNCTION - * - * _sdd_write_sectors_pio - * - * DESCRIPTION - * - * This function performs PIO data transfer to the SD memory card in - * multiple unit of sectors. - * - * NOTE - * - * - * INPUTS - * - * sector : - * sector_cnt : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_write_sectors_pio(uint32_t sector, uint32_t sector_cnt, - uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - uint32_t sdc_status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - uint32_t word_cnt; - uint32_t fifo_depth; - - if (sector > (sdd.card_desc.card_capacity << 1)) { - - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - if ((sector_cnt == 0) || (((sector + sector_cnt) > (sdd.card_desc.card_capacity << 1)))) { - - SDD_TRACE(("Invalid sector address range!\r\n")); - return SDD_INVLAID_ADDR_RANGE; - } - - if (GETB32(SDC_STATUS, SDC_SR_WRITE_PROT_BIT)) { - - SDD_TRACE(("Card is write protected!\r\n")); - return SDD_WRITE_PROTECTED; - } - - /* todo: sector size */ - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* send SD command to setup write-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _err_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.write_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, sector_cnt * SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | SDC_DATA_WRITE_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to write data */ - SDD_TRACE(("- cmd25\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd25(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd25(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("- wait ready to write out data\r\n")); - _nds_kwait(0x1000); /* hw need delay ? */ - - /* This method look not necessary for writing. */ - // status = _sd_wait_receiving_state(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) */ - // goto _err_exit; */ - - /* per sector PIO write out */ - OUT32(SDC_CLEAR, 0x3ff); - SDD_TRACE(("- write out data\r\n")); - while (sector_cnt-- > 0) { - - /* per 32-bit word write out */ - word_cnt = SDD_SECTOR_SIZE >> 2; - while (word_cnt > 0) { - - SDD_TRACE(("- word_cnt: 0x%08lx\r\n", word_cnt)); - - fifo_depth = SDC_FIFO_WORD_DEPTH; - while ((fifo_depth-- > 0) && (word_cnt-- > 0)) { - - /* CMD17/18/24/25 ACMD18/25 data are LSB first (little-endian) */ - OUT32(SDC_DATA_WIN, *((uint32_t *) io_buff)); /* just mem-move so no data endian issue. */ - - io_buff += 4; - } - - if (word_cnt == 0) - break; - - retry = 0; - while (retry++ < SD_WRITE_MAX_RETRY_COUNT) { - - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | - SDC_SR_DATA_TIMEOUT_MASK | - SDC_SR_DATA_CRC_FAIL_MASK)) { - status = SDD_WRITE_DATA_ERROR; - goto _err_exit; - } - if (sdc_status & - (SDC_SR_FIFO_URUN_MASK | - SDC_SR_DATA_END_MASK)) { - SETB32(SDC_CLEAR, SDC_FIFO_URUN_BIT); - retry = 0xffffffff; /* success */ - break; - } - } - - if (retry != 0xffffffff) { - /* wait data timeout */ - SDD_TRACE(("- timeout, sdc_status: 0x%08lx\r\n", sdc_status)); - - // SDD_TRACE(("- wait again by polling CSR\r\n")); - // status = _sd_wait_receiving_state(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) - goto _err_exit; - - SDD_TRACE(("- card ready, sdc_status: 0x%08lx\r\n", IN32(SDC_STATUS))); - } - } - } - - /* Wait host SDC shift-out FIFO data */ - SDD_TRACE(("- final check sdc_status\r\n")); - retry = 0; - while (retry++ < SD_WRITE_MAX_RETRY_COUNT) { - - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK | - SDC_SR_DATA_CRC_FAIL_MASK)) { - - status = SDD_WRITE_DATA_ERROR; - goto _err_exit; - } - if ((sdc_status == 0) || (sdc_status & SDC_SR_DATA_END_MASK)) - break; - } - - /* Stop data transmission */ - SDD_TRACE(("- stop transmission\r\n")); - status = _sd_stop_transmission(sdd.card_desc.rca); - /* FIXME this part is marked for qemu */ -#if 0 - if (status != HAL_SUCCESS) - goto _err_exit; -#endif - SDD_TRACE(("- data write completed\r\n")); - return HAL_SUCCESS; - -_err_exit: - - SDD_TRACE(("- error on data write\r\n")); - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_write_sectors_dma - * - * DESCRIPTION - * - * This function performs DMA data transfer to the SD memory card in - * multiple unit of sectors. - * - * NOTE - * - * - * INPUTS - * - * sector : - * sector_cnt : - * io_buff : - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SSPD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_write_sectors_dma(uint32_t sector, uint32_t sector_cnt, - uint8_t * io_buff) -{ - uint32_t status = SDD_INVALID_FUNCTION; - SD_R32 sd_rsp32; - uint32_t retry; - uint32_t sdc_status; - DMAD_DRB *drb; -#if 0 - if (sector > (sdd.card_desc.card_capacity << 1)) { - - SDD_TRACE(("Invalid sector address!\r\n")); - return SDD_INVLAID_ADDRESS; - } - - if ((sector_cnt == 0) || (((sector + sector_cnt) > (sdd.card_desc.card_capacity << 1)))) { - - SDD_TRACE(("Invalid sector address range!\r\n")); - return SDD_INVLAID_ADDR_RANGE; - } -#endif - if (GETB32(SDC_STATUS, SDC_SR_WRITE_PROT_BIT)) { - SDD_TRACE(("Card is write protected!\r\n")); - return SDD_WRITE_PROTECTED; - } - - /* todo: sector size */ - - /* reset dam wait event */ -// hal_set_semaphore(&sdd.dma_sem, 0); - - /* standby -> transfer */ - SDD_TRACE(("- select_card\r\n")); - status = _sd_select_card(sdd.card_desc.rca); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* send SD command to setup write-block-size */ - /* todo: assume sector size is 512 bytes */ - SDD_TRACE(("- cmd16\r\n")); - status = _sd_cmd16(SDD_SECTOR_SIZE, &sd_rsp32); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* set SDC data timeout register */ - OUT32(SDC_DATA_TIMER, sdd.card_desc.write_timeout_clks); - - /* set SDC data length register */ - OUT32(SDC_DATA_LEN, sector_cnt * SDD_SECTOR_SIZE); - - /* set SDC data control register */ - OUT32(SDC_DATA_CR, SDC_DATA_EN_MASK | SDC_DATA_WRITE_MASK | SDC_DMA_EN_MASK | ((SDD_POWER_OF_SECTOR_SIZE << SDC_BLK_SIZE_SHIFT) & SDC_BLK_SIZE_MASK)); /* 2^9 = 512 bytes */ - - /* send SD command to write data */ - SDD_TRACE(("- cmd25\r\n")); - if (sdd.card_desc.card_ccs == SDD_CCS_SD) - status = _sd_cmd25(sector * SDD_SECTOR_SIZE, &sd_rsp32); /* address unit is byte for SD */ - else - status = _sd_cmd25(sector, &sd_rsp32); /* address unit is 512 bytes for SDHC */ - - if (status != HAL_SUCCESS) - goto _safe_exit; - - SDD_TRACE(("- wait ready to write out data\r\n")); - _nds_kwait(0x1000); /* hw need delay ? */ - - /* This method look not necessary for writing. */ - // status = _sd_wait_receiving_state(sdd.card_desc.rca); - // if (status != HAL_SUCCESS) */ - // goto _err_exit; */ - - /* per sector DMA write out */ - SDD_TRACE(("- write out data\r\n")); - - dmad_apb_config_dir(&sdd.dma_ch, DMAD_DIR_A1_TO_A0); - - if(hal_create_semaphore(&sdd.dma_sem, 0, 0) == HAL_FAILURE) - SDD_TRACE(("Failed to create dma semaphore\r\n")); - - while (sector_cnt-- > 0) { - - SDD_TRACE(("sector_cnt: %ld\r\n", sector_cnt)); - - /* Prepare DRB */ - status = _dmad_alloc_drb(&sdd.dma_ch, &drb); - if (status != HAL_SUCCESS) - goto _safe_exit; - - drb->src_addr = (void *)io_buff; - drb->dst_addr = (void *)SDC_DATA_WIN; - drb->req_size = SDD_SECTOR_SIZE >> 2; /* multiple counts of transfer width */ - - if (sector_cnt == 0) - drb->completion_sem = &sdd.dma_sem; /* Register DMA completion notification */ - - /* Submit DRB */ - status = _dmad_submit_request(&sdd.dma_ch, drb); - if (status != HAL_SUCCESS) - goto _safe_exit; - - /* Point to next buffer location */ - io_buff += SDD_SECTOR_SIZE; - } - - /* - * Wait DMA completion - * - method 1: sync with semaphore - * - method 2: check SDC status register SDC_STATUS[7] - */ - status = hal_pend_semaphore(&sdd.dma_sem, 600); /* 6 sec */ - - /* Check waiting status */ - if (status == HAL_ERR_TIMEOUT) { - - SDD_TRACE(("- wait dma completion timeout (might not an error)\r\n")); - goto _safe_exit; - } - else if (status != HAL_SUCCESS) { - - SDD_TRACE(("- wait dma completion failed\r\n")); - goto _safe_exit; - } - - /* Wait host SDC shift-out FIFO data */ - SDD_TRACE(("- final check sdc_status\r\n")); - retry = 0; - while (retry++ < SD_WRITE_MAX_RETRY_COUNT) { - - sdc_status = IN32(SDC_STATUS); - if (sdc_status & - (SDC_SR_CARD_DETECT_MASK | SDC_SR_DATA_TIMEOUT_MASK | - SDC_SR_DATA_CRC_FAIL_MASK)) { - status = SDD_WRITE_DATA_ERROR; - goto _safe_exit; - } - if ((sdc_status == 0) || (sdc_status & SDC_SR_DATA_END_MASK)) - break; - } - - /* Stop data transmission */ - SDD_TRACE(("- stop transmission\r\n")); - status = _sd_stop_transmission(sdd.card_desc.rca); - /* FIXME this part is marked for qemu */ -#if 0 - if (status != HAL_SUCCESS) - goto _safe_exit; -#endif - status = HAL_SUCCESS; - -_safe_exit: - -#if (SDD_DEBUG_TRACE) - if (status == HAL_SUCCESS) - SDD_TRACE(("- data read completed\r\n")); - else - SDD_TRACE(("- error on data read\r\n")); -#endif /* SDD_DEBUG_TRACE */ - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_lisr - * - * DESCRIPTION - * - * This is the ISR that services SD card detection interrupt on the NDS32 - * evb platform. - * - * NOTE - * - * Card Detection Procedures (LISR) - * LISR set HISR activation state flag - * LISR activates HISR - * call _sdd_cd_reset() to perform card insertion or removal tasks. - * - * Card Detection Procedures (_sdd_init) - * Perform basic SD controller register setup - * Checks SDC_SR_CARD_DETECT_BIT bit - * call _sdd_cd_reset() to perform card insertion or removal tasks. - * - * INPUTS - * - * vector : Interrupt vector number - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -void _sdd_lisr(int vector) -{ - DEBUG(1, 1, "_sdd_lisr\r\n"); - printf("hal_raise_bh0\n"); - /* Fault invocation checking */ - if (vector != IRQ_SDC_VECTOR ) - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - - /* Mask : Disable SDC interrupt */ - hal_intc_irq_disable(IRQ_SDC_VECTOR); - /* Ack : Clean SDC interrupt pending */ - hal_intc_irq_clean(IRQ_SDC_VECTOR); - - printf("hal_raise_bh1\n"); - if (GETB32(SDC_STATUS, SDC_SR_CARD_CHANGE_BIT)) { - - SETB32(SDC_CLEAR, SDC_CARD_CHANGE_BIT); - - /* Set HISR status register to get channel number */ - sdd.hisr_as |= SDD_HISR_AS_CD; - printf("hal_raise_bh2\n"); - hal_raise_bh(&sdd.hisr); /* Activate HISR to complete deferred tasks */ - } - else { - printf("hal_raise_bh3\n"); - /* todo: handle other interrupts. */ - OUT32(SDC_CLEAR, SDC_CLEAR_ALL); - } - - /* Unmask : Enable SDC interrupt */ - hal_intc_irq_enable(IRQ_SDC_VECTOR); -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_hisr - * - * DESCRIPTION - * - * This is the HISR that services SD card detection interrupt on the NDS32 - * evb platform. - * - * NOTE - * - * - * INPUTS - * - * - * - * OUTPUTS - * - * none - * - ****************************************************************************/ -void _sdd_hisr(void *param) -{ - hal_bh_t *bh = (hal_bh_t *)param; - - uint32_t core_intl; - uint8_t hisr_as; /* HISR activation state - Card Detection */ - while (1){ - - DEBUG(1, 1, "_sdd_hisr before\n"); - hal_pend_semaphore(&bh->sem, HAL_SUSPEND); - - /* - * Disable CPU interrupt - * Todo: frequently int-disable due to frequently HISR-call may cause problems? - */ - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Clone HISR activation state */ - hisr_as = sdd.hisr_as; - sdd.hisr_as &= ~(uint32_t) SDD_HISR_AS_CD; - - /* Enable CPU interrupt */ - hal_global_int_ctl(core_intl); - - /* Card detect initialization */ - if (hisr_as & SDD_HISR_AS_CD) { - - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) { - - SDD_TRACE(("SD card removed!\r\n")); - - /* Perform card-remove tasks (turn off clock ...) */ - _sdd_cd_reset(HAL_FALSE); - } - else { - SDD_TRACE(("SD card inserted!\r\n")); - /* Reset card and get device parameters */ - _sdd_cd_reset(HAL_TRUE); - } - } - } -} - -#if (SDD_VFS_SUPPORT) -//STATUS _sdd_read_sectors(SDD_IOCTL_READ_SECTORS_PARAM *iop); - -STATUS _sdd_read_sectors_bdev(NDS_BDEV *bdev, UINT32 sector, UINT32 sector_count, void *buffer) -{ - STATUS io_status; - SDD_DEVICE sdd_dev; // FIXME, NDS_SD_ReadSectors doesn't use this argument actully - - BDEV_TRACE(("_sdd_read_sectors_bdev()\r\n")); - BDEV_TRACE((" read start at sector (0x%08lx + 0x%08lx = 0x%08lx) count (0x%08lx)\r\n", - bdev->start, sector, bdev->start + sector, sector_count)); -#ifndef CONFIG_PLAT_QEMU - io_status = NDS_SD_ReadSectors(&sdd_dev, bdev->start + sector, sector_count, 512, buffer); -#else - io_status = NDS_SD_ReadSectors(&sdd_dev, sector, sector_count, 512, buffer); -#endif -#if 0 - if (NU_Current_Task_Pointer() != HAL_NULL) - { - // obtain exclusive access to driver - request.nu_function = NU_ASSIGN; - request.nu_timeout = NU_SUSPEND; - status = NU_Request_Driver(&sdd_dcb, &request); - if (status != NU_SUCCESS) - return status; - } - // perform i/o operation - BDEV_TRACE((" read start at sector (0x%08lx + 0x%08lx = 0x%08lx) count (0x%08lx)\r\n", - bdev->start, sector, bdev->start + sector, sector_count)); - iop.lba_sector = bdev->start + sector; - iop.sector_count = sector_count; - iop.sector_size = SDD_SECTOR_SIZE; - iop.io_buff = buffer; - io_status = _sdd_read_sectors(&iop); - if (NU_Current_Task_Pointer() != HAL_NULL) - { - // release exclusive access to driver - request.nu_function = NU_RELEASE; - status = NU_Request_Driver(&sdd_dcb, &request); - if (status != NU_SUCCESS) - return status; - } -#endif - return io_status; -} - -//STATUS _sdd_write_sectors(SDD_IOCTL_WRITE_SECTORS_PARAM *iop); - -STATUS _sdd_write_sectors_bdev(NDS_BDEV *bdev, UINT32 sector, UINT32 sector_count, void *buffer) -{ - STATUS io_status; - SDD_DEVICE sdd_dev; // FIXME, NDS_SD_ReadSectors doesn't use this argument actully - - BDEV_TRACE(("_sdd_write_sectors_bdev()\r\n")); -#ifndef CONFIG_PLAT_QEMU - io_status = NDS_SD_WriteSectors(&sdd_dev, bdev->start + sector, sector_count, 512, buffer); -#else - io_status = NDS_SD_WriteSectors(&sdd_dev, sector, sector_count, 512, buffer); -#endif -#if 0 - if (NU_Current_Task_Pointer() != HAL_NULL) - { - // obtain exclusive access to driver - request.nu_function = NU_ASSIGN; - request.nu_timeout = NU_SUSPEND; - status = NU_Request_Driver(&sdd_dcb, &request); - if (status != NU_SUCCESS) - return status; - } - - // perform i/o operation - BDEV_TRACE((" write start at sector (0x%08lx + 0x%08lx = 0x%08lx) count (0x%08lx)\r\n", - bdev->start, sector, bdev->start + sector, sector_count)); - iop.lba_sector = bdev->start + sector; - iop.sector_count = sector_count; - iop.sector_size = SDD_SECTOR_SIZE; - iop.io_buff = buffer; - io_status = _sdd_write_sectors(&iop); - - if (NU_Current_Task_Pointer() != HAL_NULL) - { - // release exclusive access to driver - request.nu_function = NU_RELEASE; - status = NU_Request_Driver(&sdd_dcb, &request); - if (status != NU_SUCCESS) - return status; - } -#endif - BDEV_TRACE((" status (0x%08lx)\r\n", io_status)); - return io_status; -} -#endif // SDD_VFS_SUPPORT -/***************************************************************************** - * FUNCTION - * - * _sdd_init - * - * DESCRIPTION - * - * This function initializes the SDC device. - * - * NOTE - * - * SD/MEM : PC-Card Memory mode, PC-Card I/O mode, True-IDE. - * SDIO : Todo. - * SDHC : Not supported. - * MMC : Todo. - * - * Todo : Resource leaks is not recovered if error happens - * during init process. Client currently has to do - * TERMINATE request anyway, if driver load/unload - * resource control is a necessary, no-matter the - * initialization process is successful or not. - * - * INPUTS - * - * sdd_dev : user device struct - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_init(SDD_DEVICE * sdd_dev) -{ - uint32_t status = HAL_SUCCESS; - uint32_t core_intl; - - SDD_TRACE(("_sdd_init()\r\n")); - - /* Perform Parameter Checking */ - -#if (!SDD_SMALL_FOOTPRINT) - /* Check supplemental init structure */ - if (sdd_dev == HAL_NULL) { - - SDD_TRACE(("null sdd_dev!\r\n")); - return HAL_ERR_INVALID_POINTER; - } - - /* Check duplicated device initialization */ - if (sdd.valid != 0) { - - /* Error if the device has been initialized */ - SDD_TRACE(("sdd.valid is non-zero!\r\n")); - return SDD_INVALID_INIT; - } -#endif /* (!SDD_SMALL_FOOTPRINT) */ - - /* Initialize SDC driver resources */ - - /* Allocate DMA channel if user requested static DMA channel mode */ - switch (sdd_dev->dma) { - case SDD_DMA_NONE: - case SDD_DMA_DCH: - break; - case SDD_DMA_SCH: - status = _sdd_alloc_dma_channel(); - if (status != HAL_SUCCESS) - return status; - break; - default: - return SDD_INVALID_PARAMETER; - } - - sdd.dma = sdd_dev->dma; - - /* - * Allocate mutex (a semaphore with init count == 1) - * for driver access control - */ - status = hal_create_mutex(&sdd.semaphore, "sdd_sem"); - if (status != HAL_SUCCESS) { - - SDD_TRACE(("Failed to create SD driver semaphore!\r\n")); - return status; - } - - /* - * Allocate synchronization object for SDD to receive DMA completion notfication - * (init count is 0 so any obtain have to wait first) - */ - status = hal_create_semaphore(&sdd.dma_sem, 0, 0); - if (status != HAL_SUCCESS) { - - SDD_TRACE(("Failed to allocate SD driver dma semaphore!\r\n")); - hal_destroy_mutex(&sdd.semaphore); - return status; - } - - /* Register LISR to receive SDC events */ - if (sdd.lisr_registered == 0) { - - /* Register LISR for SDC events interrupt */ - status = hal_register_isr(IRQ_SDC_VECTOR, _sdd_lisr, (void*)0); - - if (status != HAL_SUCCESS) { - - SDD_TRACE(("Failed to register SD driver LISR!\r\n")); - hal_destroy_mutex(&sdd.semaphore); - hal_destroy_semaphore(&sdd.dma_sem); - return status; - } - - sdd.lisr_registered = 1; - } - - /* Register HISR to perform deferred SDC ISR tasks */ - if (sdd.hisr_registered == 0) { - sdd.hisr.th.fn = _sdd_hisr; - sdd.hisr.th.arg = &sdd.hisr; - sdd.hisr.th.ptos = &sdd_hisr_stack[SDD_HISR_STACK_SIZE]; - sdd.hisr.th.stack_size = sizeof(sdd_hisr_stack); - sdd.hisr.th.prio = CONFIG_SDD_HISR_PRIORITY; - sdd.hisr.th.name = "SD BH"; - - status = hal_create_bh(&sdd.hisr); - if (status != HAL_SUCCESS) { - DEBUG(1, 1, "Failed to create SD driver HISR!\r\n"); - hal_destroy_mutex(&sdd.semaphore); - hal_destroy_semaphore(&sdd.dma_sem); - return status; - } - sdd.hisr_registered = 1; - } - - /* Update driver data */ -#if (SDD_VFS_SUPPORT) - // Init SDD-specific bdev object - sdd_bdev.next = HAL_NULL; - sdd_bdev.dev_id = 0; - sdd_bdev.vol_id = 0; - sdd_bdev.type = 0; - sdd_bdev.start = 0; - sdd_bdev.blocks = 0; - sdd_bdev.propagate_event = HAL_NULL; - sdd_bdev.read_sectors = _sdd_read_sectors_bdev; - sdd_bdev.write_sectors = _sdd_write_sectors_bdev; - sdd_dev->bdev_id = &sdd_bdev; -#endif // SDD_VFS_SUPPORT - - /* - * Initialize SDC device - * - * SD card initialization and identification are performed either at - * - when the card was inserted (i.e., triggered from ISR and HISR), or - * - when this init routine was invoked and the card was already in the slot. - */ - - /* Disable CPU interrupt */ - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* - Disable SDC interrupt */ - hal_intc_irq_disable(IRQ_SDC_VECTOR); - - /* - Clear SDC interrupt status */ - hal_intc_irq_clean(IRQ_SDC_VECTOR); - - /* - Setup SDC interrupt trigger mode - level trigger */ - /* - Setup SDC interrupt trigger level - assert high */ - hal_intc_irq_config(IRQ_SDC_VECTOR,IRQ_LEVEL_TRIGGER, IRQ_ACTIVE_HIGH); - - /* - Enable SDC interrupt */ - hal_intc_irq_enable(IRQ_SDC_VECTOR); - -#if 0 -#if(NO_EXTERNAL_INT_CTL==1) - /* FIXME - * - Setup SDC interrupt trigger mode */ - /* - Enable SDC interrupt */ - SR_SETB32(NDS32_SR_INT_MASK2,IRQ_SDC_VECTOR ); -#else - /* INTC */ - /* - Disable SDC interrupt */ - CLRB32(INTC_HW1_ER, IRQ_SDC_VECTOR); - - /* - Clear SDC interrupt status */ - SETB32(INTC_HW1_CLR, IRQ_SDC_VECTOR); - - /* - Setup SDC interrupt trigger mode - level trigger */ - CLRB32(INTC_HW1_TMR, IRQ_SDC_VECTOR); - - /* - Setup SDC interrupt trigger level - assert high */ - CLRB32(INTC_HW1_TLR, IRQ_SDC_VECTOR); - - /* - Enable SDC interrupt */ - SETB32(INTC_HW1_ER, IRQ_SDC_VECTOR); -#endif -#endif - - /* APBMCLKOFF */ - /* todo */ - - /* - * SDC_PWR_CTL - * SD_POWER 0 (default: 0x00) (leave bootup default?) - * SD_POWER_ON 0 (off) (default: 0x10) - */ - CLRB32(SDC_PWR_CTL, SDC_SD_POWER_ON_BIT); - _nds_kwait(0x4000); - - /* - * SDC_CLK_CTL - * CLK_DIV 0x7f (default: 0x7f, result in 97.66K ~ 683.59K SD bus freq) - * CLK_SD 1 (default: 1 (SD)) - * CLK_DIS 1 (off) (default: 0x01) - */ - OUT32(SDC_CLK_CTL, (SDC_CLK_OFF << SDC_CLK_DIS_BIT) | - (SDC_CLK_SD << SDC_CLK_SD_BIT) | SDC_CLK_DIV_MASK); - - /* - * SDC_MASK (note: spec "mask" means "enable", spec uses wrong term to describe this register) - * RSP_CRC_FAIL mask int - * DATA_CRC_FAIL mask int - * RSP_TIMEOUT mask int - * DATA_TIMEOUT mask int - * RSP_CRC_OK mask int - * DATA_CRC_OK mask int - * CMD_SENT mask int - * DATA_END mask int - * FIFO_U_RUN mask int - * FIFO_O_RUN mask int - * CARD_CHANGE enable int - */ - OUT32(SDC_MASK, SDC_CARD_CHANGE_MASK); - - /* SDC_CLEAR */ - /* Clear all */ - OUT32(SDC_CLEAR, SDC_CLEAR_ALL); - - /* - * Following host controller register register setting needs information - * from the card, hence is postponed in the card initialization and - * identification routine. - * - * Data setup (need CSD/SCR) - * - * SDC_DATA_CR (setup before data transfer) - * SDC_DATA_TIMER (TAAC/NSAC) - * SDC_DATA_LEN (READ/WRITE/ERASE_BL_LEN, SECTOR_SIZE) - * SDC_BUS_WIDTH (SCR::SD_BUS_WIDTHS) - * - * Power/Clock settings (need OCR) - * - * SDC_PWR_CTL (OCR::Vdd) - * SDC_CLK_CTL (fod, fpp) - */ - - /* - * Detect card and perform card-detection initialization, if the is - * already in the slot before we re-enable interrupt. - */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) { - /* Perform card-remove tasks (turn off clock ...) */ - SDD_TRACE(("SD card is not in slot!\r\n")); - _sdd_cd_reset(HAL_FALSE); - } - else { - /* Reset card and get device parameters */ - SDD_TRACE(("SD card is in slot!\r\n")); - _sdd_cd_reset(HAL_TRUE); - //_sdd_cd_reset(HAL_TRUE); - //_sdd_cd_reset(HAL_TRUE); - //_sdd_cd_reset(HAL_TRUE); - // FIXME - } - - /* Restore CPU interrupt controller to previous level */ - hal_global_int_ctl(core_intl); - - /* Mark driver state as valid */ - sdd.valid = 1; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_unload - * - * DESCRIPTION - * - * Remove all the device resource so the driver could be removed safely. - * - * NOTE - * - * INPUTS - * - * none - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_unload(void) -{ - uint32_t status; - -#if (!SDD_SMALL_FOOTPRINT) - /* Validate to terminate an already initialized driver state */ - if (sdd.valid == 0) - return HAL_ERR_INVALID_DRIVER; -#endif /* (!SDD_SMALL_FOOTPRINT) */ - - // Notify file system -#if (SDD_VFS_SUPPORT) - if (sdd_bdev.propagate_event != HAL_NULL) - sdd_bdev.propagate_event(&sdd_bdev, NDSBDEV_DEVICE_UNPLUG, HAL_NULL); - - sdd_bdev.next = HAL_NULL; - sdd_bdev.dev_id = 0; - sdd_bdev.vol_id = 0; - sdd_bdev.type = 0; - sdd_bdev.start = 0; - sdd_bdev.blocks = 0; - sdd_bdev.propagate_event = HAL_NULL; - sdd_bdev.read_sectors = HAL_NULL; - sdd_bdev.write_sectors = HAL_NULL; -#endif // SDD_VFS_SUPPORT - /* Shutdown device operation */ - - /* Release driver resources */ - if (sdd.dma == SDD_DMA_SCH) - _sdd_free_dma_channel(); - - status = hal_destroy_bh(&sdd.hisr); - if (status != HAL_SUCCESS) - return status; - - status = hal_destroy_semaphore(&sdd.dma_sem); - if (status != HAL_SUCCESS) - return status; - - status = hal_destroy_mutex(&sdd.semaphore); - if (status != HAL_SUCCESS) - return status; - - sdd.valid = 0; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_lock - * - * DESCRIPTION - * - * Obtain exclusive access to the devcie driver. - * - * NOTE - * - * INPUTS - * - * none - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static inline uint32_t _sdd_lock(void) -{ -#if (!SDD_SMALL_FOOTPRINT) - if (sdd.valid == 0) - return HAL_ERR_INVALID_DRIVER; -#endif /* (!SDD_SMALL_FOOTPRINT) */ - - return hal_wait_for_mutex(&sdd.semaphore, HAL_SUSPEND); -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_unlock - * - * DESCRIPTION - * - * Release exclusive access to the device driver. - * - * NOTE - * - * INPUTS - * - * none - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static inline uint32_t _sdd_unlock(void) -{ -#if (!SDD_SMALL_FOOTPRINT) - if (sdd.valid == 0) - return HAL_ERR_INVALID_DRIVER; -#endif /* (!SDD_SMALL_FOOTPRINT) */ - - return hal_release_mutex(&sdd.semaphore); -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_read_sectors - * - * DESCRIPTION - * - * Read sectors of data from the card. This is the DMA/PIO mode data- - * read dispatch function for client IOCTL request. - * - * NOTE - * - * INPUTS - * - * iop : pointer to SDD_IOCTL_READ_SECTORS_PARAM struct which - * specifies the IOCTL parameters. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_read_sectors(SDD_IOCTL_READ_SECTORS_PARAM * iop) -{ - uint32_t sector = iop->lba_sector; - uint32_t sector_cnt = iop->sector_count; - uint8_t *io_buff = (uint8_t *) iop->io_buff; - uint32_t status; - uint32_t core_intl; - uint32_t rca = 0; - - SDD_TRACE(("\r\n_sdd_read_sectors\r\n")); - - /* Disable CPU interrupt */ - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Check if SD card has been initialized to transfer state */ - rca = sdd.card_desc.rca; - - /* Restore CPU interrupt controller to previous level */ - hal_global_int_ctl(core_intl); - - /* Reject if SD card is not initialized to transfer state */ - if (rca == 0) - return SDD_INVALID_INIT; - - /* Data transfer ... */ - if ((sdd.dma != SDD_DMA_NONE) /* && (hal_current() != HAL_NULL) */ ) { - SDD_TRACE(("dma - sector(%ld) counts(%ld)\r\n", sector, - sector_cnt)); - - if (sdd.dma == SDD_DMA_DCH) { - - status = _sdd_alloc_dma_channel(); - if (status != HAL_SUCCESS) - return status; - } - - while (sector_cnt > 0) { - /* - * SDC data length register max is 24 bits (32768 sectors). - * Divided by 2 for safe in case sector size is larger than 512 bytes. - * (so max sector size should be less than 1024 bytes) - */ - if (sector_cnt >= 16384) { - - /* Use SD multiple block transfer for sectors. */ - status = _sdd_read_sectors_dma(sector, 16384, io_buff); - - if (status != HAL_SUCCESS) { - - /* Release DMA channel */ - if (sdd.dma == SDD_DMA_DCH) - _sdd_free_dma_channel(); - return status; - } - - sector += 16384; - sector_cnt -= 16384; - io_buff += SDD_SECTOR_SIZE * 16384; - } - else { - /* Use SD multiple block transfer for all sectors. */ - status = _sdd_read_sectors_dma(sector, sector_cnt, io_buff); - sector_cnt = 0; - } - } - - /* Wait for DMA completion signal */ - - /* Release DMA channel */ - if (sdd.dma == SDD_DMA_DCH) - _sdd_free_dma_channel(); - } - else { - /* PIO mode data transfer */ - SDD_TRACE(("pio - sector(%ld) counts(%ld)\r\n", sector, sector_cnt)); - - while (sector_cnt > 0) { - /* - * SDC data length register max is 24 bits (32768 sectors). - * Divided by 2 for safe in case sector size is larger than 512 bytes. - * (so max sector size should be less than 1024 bytes) - */ - if (sector_cnt >= 16384) { - /* Use SD multiple block transfer for sectors. */ - status = _sdd_read_sectors_pio(sector, 16384, io_buff); - - if (status != HAL_SUCCESS) - return status; - - sector += 16384; - sector_cnt -= 16384; - io_buff += SDD_SECTOR_SIZE * 16384; - } - else { - /* Use SD multiple block transfer for all sectors. */ - status = _sdd_read_sectors_pio(sector, sector_cnt, io_buff); - sector_cnt = 0; - } - } - } - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_write_sectors - * - * DESCRIPTION - * - * Write sectors of data to the card. This is the DMA/PIO mode data- - * write dispatch function for client IOCTL request. - * - * NOTE - * - * INPUTS - * - * iop : pointer to SDD_IOCTL_READ_SECTORS_PARAM struct which - * specifies the IOCTL parameters. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static uint32_t _sdd_write_sectors(SDD_IOCTL_WRITE_SECTORS_PARAM * iop) -{ - uint32_t sector = iop->lba_sector; - uint32_t sector_cnt = iop->sector_count; - uint8_t *io_buff = (uint8_t *) iop->io_buff; - uint32_t status; - uint32_t core_intl; - uint32_t rca = 0; - - SDD_TRACE(("\r\n_sdd_write_sectors\r\n")); - - /* Disable CPU interrupt */ - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Check if SD card has been initialized to transfer state */ - rca = sdd.card_desc.rca; - - /* Restore CPU interrupt controller to previous level */ - hal_global_int_ctl(core_intl); - - /* Reject if SD card is not initialized to transfer state */ - if (rca == 0) - return SDD_INVALID_INIT; - - /* Data transfer ... */ - if ((sdd.dma != SDD_DMA_NONE) /* && (hal_current() != HAL_NULL) */ ) { - SDD_TRACE(("dma - sector(%ld) counts(%ld)\r\n", sector, - sector_cnt)); - - if (sdd.dma != SDD_DMA_SCH) { - - status = _sdd_alloc_dma_channel(); - if (status != HAL_SUCCESS) - return status; - } - - while (sector_cnt > 0) { - /* - * SDC data length register max is 24 bits (32768 sectors). - * Divided by 2 for safe in case sector size is larger than 512 bytes. - * (so max sector size should be less than 1024 bytes) - */ - if (sector_cnt >= 16384) { - /* Use SD multiple block transfer for sectors. */ - status = _sdd_write_sectors_dma(sector, 16384, io_buff); - - if (status != HAL_SUCCESS) { - - if (sdd.dma == SDD_DMA_DCH) - _sdd_free_dma_channel(); - - return status; - } - - sector += 16384; - sector_cnt -= 16384; - io_buff += SDD_SECTOR_SIZE * 16384; - } - else { - /* Use SD multiple block transfer for all sectors. */ - status = _sdd_write_sectors_dma(sector, sector_cnt, io_buff); - sector_cnt = 0; - } - } - - /* Wait for DMA completion signal */ - - /* Release DMA channel */ - if (sdd.dma == SDD_DMA_DCH) - _sdd_free_dma_channel(); - } - else { - /* PIO mode data transfer */ - SDD_TRACE(("pio - sector(%ld) counts(%ld)\r\n", sector, - sector_cnt)); - - while (sector_cnt > 0) { - /* - * SDC data length register max is 24 bits (32768 sectors). - * Divided by 2 for safe in case sector size is larger than 512 bytes. - * (so max sector size should be less than 1024 bytes) - */ - if (sector_cnt >= 16384) { - /* Use SD multiple block transfer for sectors. */ - status = _sdd_write_sectors_pio(sector, 16384, io_buff); - - if (status != HAL_SUCCESS) - return status; - - sector += 16384; - sector_cnt -= 16384; - io_buff += SDD_SECTOR_SIZE * 16384; - } - else { - /* Use SD multiple block transfer for all sectors. */ - status = _sdd_write_sectors_pio(sector, sector_cnt, io_buff); - sector_cnt = 0; - } - } - } - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sdd_ioctl - * - * DESCRIPTION - * - * This function execute I/O control commands to SDC driver. - * - * NOTE - * - * - * INPUTS - * - * driver : device object/control_block - * request : request function and supplemental parameters - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -static inline uint32_t _sdd_ioctl(uint32_t ioctl, void *param) -{ - uint32_t status = HAL_SUCCESS; - -#if (!SDD_SMALL_FOOTPRINT) - /* Validate to terminate an already initialized driver state */ - if (sdd.valid == 0) - return HAL_ERR_INVALID_DRIVER; -#endif /* (!UARTD_SMALL_FOOTPRINT) */ - - if (param == HAL_NULL) - return SDD_INVALID_PARAMETER; - - switch (ioctl) { - case SDD_IOCTL_READ_SECTORS: - /* Parameter: pointer to SDD_IOCTL_READ_SECTORS_PARAM struct */ - status = _sdd_read_sectors((SDD_IOCTL_READ_SECTORS_PARAM *) param); - break; - - case SDD_IOCTL_WRITE_SECTORS: - /* Parameter: pointer to SDD_IOCTL_READ_SECTORS_PARAM struct */ - status = _sdd_write_sectors((SDD_IOCTL_WRITE_SECTORS_PARAM *) param); - break; - - default: - status = SDD_INVALID_IOCTL; - break; - } - - return status; -} - -/***************************************************************************** - * FUNCTION - * - * NDS_SD_Init - * - * DESCRIPTION - * - * This function initializes the SD device. - * - * INPUTS - * - * sdd_dev : User mode SDD device structure. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else a negative value is returned. - * - ****************************************************************************/ -uint32_t NDS_SD_Init(SDD_DEVICE * sdd_dev) -{ - return _sdd_init(sdd_dev); -} - -/***************************************************************************** - * FUNCTION - - * NDS_SD_Unload - * - * DESCRIPTION - * - * This function terminates all SD transaction and unload the driver. - * - * INPUTS - * - * None. - * - * OUTPUTS - * - * None. - * - ****************************************************************************/ -void NDS_SD_Unload() -{ - _sdd_unload(); -} - -/***************************************************************************** - * FUNCTION - * - * NDS_SD_ReadSectors - * - * DESCRIPTION - * - * This function read sectors of data from the SD memory card. - * - * INPUTS - * - * sdd_dev : User mode SDD device structure. - * sector : The starting LBA sector number. - * sector_count : Number of sectors to read. - * sector_size : Size of a sector in bytes. - * buffer : Pointer to a user buffer to hold the readback data. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else a negative value is returned. - * - ****************************************************************************/ -uint32_t NDS_SD_ReadSectors(SDD_DEVICE * sdd_dev, uint32_t sector, - uint32_t sector_count, uint32_t sector_size, - void *buffer) -{ - uint32_t status; - uint32_t io_status; - SDD_IOCTL_READ_SECTORS_PARAM iop; - - status = _sdd_lock(); - if (status != HAL_SUCCESS) - hal_system_error(status); - - iop.lba_sector = sector; - iop.sector_count = sector_count; - iop.sector_size = sector_size; - iop.io_buff = buffer; - - io_status = _sdd_read_sectors(&iop); - - status = _sdd_unlock(); - if (status != HAL_SUCCESS) - hal_system_error(status); - - return io_status; -} - -/***************************************************************************** - * FUNCTION - * - * NDS_SD_WriteSectors - * - * DESCRIPTION - * - * This function write sectors of data to the SD memory card. - * - * INPUTS - * - * sdd_dev : User mode SDD device structure. - * sector : The starting LBA sector number. - * sector_count : Number of sectors to write. - * sector_size : Size of a sector in bytes. - * buffer : Pointer to a user buffer of data to be written to the card. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful initialization, - * else a negative value is returned. - * - ****************************************************************************/ -uint32_t NDS_SD_WriteSectors(SDD_DEVICE * sdd_dev, uint32_t sector, - uint32_t sector_count, uint32_t sector_size, - void *buffer) -{ - uint32_t status; - uint32_t io_status; - SDD_IOCTL_WRITE_SECTORS_PARAM iop; - status = _sdd_lock(); - if (status != HAL_SUCCESS) - hal_system_error(status); - - iop.lba_sector = sector; - iop.sector_count = sector_count; - iop.sector_size = sector_size; - iop.io_buff = buffer; - - io_status = _sdd_write_sectors(&iop); - - status = _sdd_unlock(); - if (status != HAL_SUCCESS) - hal_system_error(status); - - return io_status; -} diff --git a/bsp/AE210P/driver/sd/sdd.h b/bsp/AE210P/driver/sd/sdd.h deleted file mode 100644 index bde31dd0b2..0000000000 --- a/bsp/AE210P/driver/sd/sdd.h +++ /dev/null @@ -1,219 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sdd.h - * - * DESCRIPTION - * - * SD driver implementation kernel mode header file. - * (Nucleus I/O Driver Architecture) - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * sd.h SD driver interface exported to user applications - * ag101regs.h SoC register address header file - * ag101defs.h SoC register constant definition header file - * - ****************************************************************************/ -#ifndef __SDD_H__ -#define __SDD_H__ - -#include -#include -#include "sd.h" - -/* configuration section */ -/* Note: SD clock -- please check "ag101defs.h". */ -#define SDD_SMALL_FOOTPRINT 0 /* non-zero to disable extra features for small footprint */ -#define SDD_SMALL_SD_FOOTPRINT 0 /* non-zero to skip compiling and linking of unsed SD command routines. */ -#define SDD_DEBUG_TRACE 0 /* non-zero to enable debug trace message */ -#define SDD_VFS_SUPPORT 1 /* non-zero to enable VFS support */ - -/* Define sector size that should be common for all file systems. */ -/* Todo: Check if this the common case. */ -#define SDD_SECTOR_SIZE 512 -#define SDD_POWER_OF_SECTOR_SIZE 9 -#define SDD_BYTES_TO_SECTORS(b) ((uint32_t)(b) >> 9) - -/* SDD enums */ -typedef enum _SDD_CARD_SPEC { - - SDD_SPEC_1XX, /* the card is a spec 1.x implementation */ - SDD_SPEC_200 /* the card is a spec 2.0 implementation */ - -} SDD_CARD_SPEC; - -typedef enum _SDD_CARD_CCS { - - SDD_CCS_SD, /* the card is a standard capacity card */ - SDD_CCS_SDHC /* the card is a high capacity card */ - -} SDD_CARD_CCS; - -typedef enum _SDD_VDD_WINDOW { - - SDD_VDD_2_7 = 0x00008000, /* VDD 2.7 ~ 2.8 */ - SDD_VDD_2_8 = 0x00010000, /* VDD 2.8 ~ 2.9 */ - SDD_VDD_2_9 = 0x00020000, /* VDD 2.9 ~ 3.0 */ - SDD_VDD_3_0 = 0x00040000, /* VDD 3.0 ~ 3.1 */ - SDD_VDD_3_1 = 0x00080000, /* VDD 3.1 ~ 3.2 */ - SDD_VDD_3_2 = 0x00100000, /* VDD 3.2 ~ 3.3 */ - SDD_VDD_3_3 = 0x00200000, /* VDD 3.3 ~ 3.4 */ - SDD_VDD_3_4 = 0x00400000, /* VDD 3.4 ~ 3.5 */ - SDD_VDD_3_5 = 0x00800000, /* VDD 3.5 ~ 3.6 */ - -} SDD_VDD_WINDOW; - -/* - * SD card device parameters - * Note: - * 1. This struct supports a single card. - * 2. Watch out 32-bit alignment after remarking unnecessary fields. - */ -typedef struct _SDD_CARD_DESC { - - /* OCR (acmd41) */ - uint8_t version; /* one of the enum value of SDD_CARD_SPEC */ - uint8_t card_ccs; /* one of the enum value of SDD_CARD_CCS */ - uint8_t padding1[2]; - uint32_t vdd_window; /* one of the mask bits defined in SDD_VDD_WINDOW */ - - /* CID (cmd2) */ - uint8_t mfg_id; /* Manufacturer ID */ - char oem_id[3]; /* OEM/Application ID (2 char + 1 null-sz) */ - char prod_name[6]; /* Product name (5 char + 1 null-sz) */ - char prod_rev[4]; /* Product revision (x.y + 1 null-sz) */ - uint8_t padding2[2]; - uint32_t prod_sn; /* Product serial number */ - uint16_t mfg_year; /* Manufacturing date */ - uint16_t mfg_month; - - /* RCA (cmd3) */ - uint32_t rca; /* [31:16] RCA, [15:0] zero. */ - - /* - * Driver will check this before data transfer. */ - /* CSD (cmd9) */ - /* Todo: This is a tedious list and most fields are only for information purpose. */ - /* Remove unnecessary fields after debugging. */ - uint8_t csd_ver; /* CSD version */ - uint8_t padding3[3]; - - uint32_t async_access_time; /* data read access time 1 (TAAC, x10, unit of ns) (2.0 is fixed value) */ - uint32_t read_access_clks; /* data read access time 2 (NSAC, clock cycles) (2.0 is fixed value) */ - uint32_t prog_factor; /* multiplication factor of time for typical block program (2.0 is fixed value) */ - uint32_t max_dataline_rate; /* max data transfer rate (unit of kbps) (2.0 is fixed value) */ - - uint32_t cmd_class; /* card command classes */ - - uint16_t max_read_block_len; /* read block length in bytes (2.0 is fixed value) */ - uint8_t partial_block_read; /* non-zero if the card supports small block size (minimum to 1 bytes) (2.0 is fixed value) */ - uint8_t read_block_misalign; /* capability to read accross physical blocks (2.0 is fixed value) */ - - uint16_t max_write_block_len; /* write block length in bytes (2.0 is fixed value) */ - uint8_t partial_block_write; /* non-zero if the card supports small block size (minimum to 1 bytes) (2.0 is fixed value) */ - uint8_t write_block_misalign; /* capability to write accross physical blocks (2.0 is fixed value) */ - - uint8_t erase_single_block; /* non-zero if able to erase single block (2.0 is fixed value) */ - uint8_t erase_sector_size; /* erase unit, number of write block size (not the meaning of disk sectors) (2.0 is fixed value) */ - uint8_t file_format; /* enum of SDD_FILE_FORMAT (2.0 is fixed value) */ - uint8_t padding4; - - uint8_t wp_group_size; /* write protect group size, number of erase sector size. (2.0 is fixed value) */ - uint8_t wp_group_enable; /* zero means no group write protection possible (2.0 is fixed value) */ - uint8_t wp_permanent; /* card is permanently write protected */ - uint8_t wp_temp; /* card is temporarily write protected */ - - uint8_t copy; /* indicates if the content is original (0) or copied (1 for OTP/MTP devices) */ - uint8_t dsr_imp; /* non-zero if configurable driver stage register is supported */ - uint32_t c_size; /* C_SIZE */ - uint32_t c_size_mult; /* C_SIZE_MULT (2.0 is obsolete) */ - -#if 0 - uint8_t max_c_read_at_vdd_min; /* max read current at vdd min (2.0 is obsolete) */ - uint8_t max_c_read_at_vdd_max; /* max read current at vdd max (2.0 is obsolete) */ - uint8_t max_c_write_at_vdd_min; /* max write current at vdd min (2.0 is obsolete) */ - uint8_t max_c_write_at_vdd_max; /* max write current at vdd max (2.0 is obsolete) */ -#endif - - /* SCR (acmd51) */ - uint8_t scr_ver; /* SCR version */ - uint8_t spec_ver; /* SD memory card spec version */ - uint8_t erase_val; /* data status after erase (0 or 1) */ - uint8_t security_ver; /* security specification version */ - uint8_t bus_width; /* data bus width, 1 or 4. */ - - /* derived fields */ - uint32_t card_capacity; /* card size, in unit of 512-bytes */ - uint32_t sdc_clk_div; /* clock division value to setup SDC SDC_CLK_DIV register */ - uint32_t sdc_clk_freq; /* SDC clock frequency (info only) */ - uint32_t read_timeout_clks; /* read timeout value to setup SDC DATA_TIMER register (fixed 100ms for SDHC) */ - uint32_t write_timeout_clks; /* write timeout value to setup SDC DATA_TIMER register (fixed 250ms for SDHC) */ - -} SDD_CARD_DESC; - -/* HISR definitions */ -#define SDD_HISR_PRIORITY 0 /* 0: highest, 2: lowest */ -#define SDD_HISR_STACK_SIZE 2048 /* Please align to 32-bit */ - -enum SDD_HISR_AS { - - SDD_HISR_AS_CD = 0x00000001, /* Card Detect */ - -}; - -/* Driver data structure, one instance per system */ -typedef struct SDD_DATA_STRUCT { - - uint8_t valid; /* Indicates whether the device driver is instanciated or not */ - uint8_t lisr_registered; /* SD cd LISR registeration status */ - uint8_t hisr_registered; /* SD cd HISR registeration status */ - uint8_t dma; /* One of the enum value in SDD_DMA_MODE for SD data transfer */ - - SDD_CARD_DESC card_desc; /* SD card parameters obtained from various card registers. */ - - hal_mutex_t semaphore; /* control exclusive access to driver */ - hal_semaphore_t dma_sem; /* obtain dma completion notification from DMA hisr */ - - /* HISR resources */ - hal_bh_t hisr; /* HISR kernel object, used to perform deffered tasks of LISR */ - uint32_t hisr_as; /* HISR activation state (for the single HISR to identify why activated it) */ - - /* DMA resources */ - DMAD_CHANNEL_REQUEST_DESC dma_ch; /* DMA channel descriptor initialized before data transfer */ - -} SDD_DATA; - -/* Driver-occupied memory pool definitions */ -#define SDD_MEM_POOL_BASE_SIZE 40960 /* base pool size for driver before counting size of ? */ -#define SDD_MEM_ALLOC_GRANULARITY 8 - -/* Debug trace mechanism */ -#if (SDD_DEBUG_TRACE) - -#define SDD_TRACE(x) printf x -#define SDD_STRACE(x) printf x - -#else /* SDD_DEBUG_TRACE */ - -#define SDD_TRACE(x) -#define SDD_STRACE(x) - -#endif /* SDD_DEBUG_TRACE */ - -#endif /* __SDD_H__ */ diff --git a/bsp/AE210P/driver/sd/sdd_sd.c b/bsp/AE210P/driver/sd/sdd_sd.c deleted file mode 100644 index f557fa569b..0000000000 --- a/bsp/AE210P/driver/sd/sdd_sd.c +++ /dev/null @@ -1,2662 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Sep.26.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sdd_sd.c - * - * DESCRIPTION - * - * Secure digital card specification 2.0 definition. - * - * Currently only Secure Digital Memory standards are well-defined. - * Remaining spec mostly are left for future developers. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * None - * - ****************************************************************************/ -#include "sdd.h" -#include "sdd_sd.h" - -/* - * If SDD_SMALL_FOOTPRINT is defined, SD command routines are defined as - * macros which will be redirect to a general command issuing routine. - * - * If performance is required, set SDD_SMALL_FOOTPRINT to 0. The SD command - * issuing routines are then a set of expanded code. - */ -#if (SDD_SMALL_FOOTPRINT) -#define SDC_INLINE static _inline -#else /* SDD_SMALL_FOOTPRINT */ -#define SDC_INLINE static -#endif /* SDD_SMALL_FOOTPRINT */ - -/* Local Helper Routines */ -SDC_INLINE uint32_t _sd_cmd(uint32_t cmd) -{ - uint32_t retry_cnt = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK | SDC_CMD_SENT_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is on the way to the card ... */ - while (retry_cnt++ < SD_CMD_MAX_RETRY_COUNT) { - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Get new status of SDC */ - if (GETB32(SDC_STATUS, SDC_SR_CMD_SENT_BIT) != 0) - return HAL_SUCCESS; - } - - return SDD_CMD_TIMEOUT; -} - -SDC_INLINE uint32_t _sd_cmd_arg(uint32_t cmd, uint32_t arg) -{ - uint32_t retry_cnt = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK | SDC_CMD_SENT_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Prepare Argument */ - OUT32(SDC_CMD_ARG, arg); - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is on the way to the card ... */ - while (retry_cnt++ < SD_CMD_MAX_RETRY_COUNT) { - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Get new status of SDC */ - if (GETB32(SDC_STATUS, SDC_SR_CMD_SENT_BIT) != 0) - return HAL_SUCCESS; - } - - return SDD_CMD_TIMEOUT; -} - -SDC_INLINE uint32_t _sd_cmd_r32(uint32_t cmd, SD_R32 * rsp) -{ - uint32_t retry_cnt = 0; - uint32_t sdc_sr = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK | SDC_CMD_SENT_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is responsed ... */ - while (retry_cnt++ < SD_CMD_MAX_RETRY_COUNT) { - - sdc_sr = IN32(SDC_STATUS); - - /* Make sure card exists */ - if (sdc_sr & SDC_SR_CARD_DETECT_BIT) - return SDD_CARD_REMOVED; - - /* Check error status */ - if (sdc_sr & SDC_SR_RSP_CRC_OK_MASK) { - - rsp->r[0] = IN32(SDC_R0); - return HAL_SUCCESS; - } - else if (sdc_sr & SDC_SR_RSP_CRC_FAIL_MASK) { - - return SDD_RSP_CRC_ERROR; - } - else if (sdc_sr & SDC_SR_RSP_TIMEOUT_MASK) { - - return SDD_RSP_TIMEOUT; - } - } - - return SDD_CMD_TIMEOUT; -} - -SDC_INLINE uint32_t _sd_cmd_arg_r32(uint32_t cmd, uint32_t arg, SD_R32 * rsp) -{ - uint32_t sdc_sr = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Prepare Argument */ - OUT32(SDC_CMD_ARG, arg); - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is responsed ... */ - while (1) { - -// _nds_kwait(0x1000); /* hw need delay ? */ - - sdc_sr = IN32(SDC_STATUS); - - /* Make sure card exists */ - if (sdc_sr & SDC_SR_CARD_DETECT_BIT) - return SDD_CARD_REMOVED; - - /* Check error status */ - if (sdc_sr & SDC_SR_RSP_CRC_OK_MASK) { - - rsp->r[0] = IN32(SDC_R0); - return HAL_SUCCESS; - } - else if (sdc_sr & SDC_SR_RSP_CRC_FAIL_MASK) { - - return SDD_RSP_CRC_ERROR; - } - else if (sdc_sr & SDC_SR_RSP_TIMEOUT_MASK) { - - return SDD_RSP_TIMEOUT; - } - } - - return SDD_CMD_TIMEOUT; -} - -SDC_INLINE uint32_t _sd_cmd_r128(uint32_t cmd, SD_R128 * rsp) -{ - uint32_t retry_cnt = 0; - uint32_t sdc_sr = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK | SDC_CMD_SENT_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is responsed ... */ - while (retry_cnt++ < SD_CMD_MAX_RETRY_COUNT) { - - sdc_sr = IN32(SDC_STATUS); - - /* Make sure card exists */ - if (sdc_sr & SDC_SR_CARD_DETECT_BIT) - return SDD_CARD_REMOVED; - - /* Check error status */ - if (sdc_sr & SDC_SR_RSP_CRC_OK_MASK) { - - rsp->r[0] = IN32(SDC_R0); - rsp->r[1] = IN32(SDC_R1); - rsp->r[2] = IN32(SDC_R2); - rsp->r[3] = IN32(SDC_R3); - - return HAL_SUCCESS; - } - else if (sdc_sr & SDC_SR_RSP_CRC_FAIL_MASK) { - - return SDD_RSP_CRC_ERROR; - } - else if (sdc_sr & SDC_SR_RSP_TIMEOUT_MASK) { - - return SDD_RSP_TIMEOUT; - } - } - - return SDD_CMD_TIMEOUT; -} - -SDC_INLINE uint32_t _sd_cmd_arg_r128(uint32_t cmd, uint32_t arg, SD_R128 * rsp) -{ - uint32_t retry_cnt = 0; - uint32_t sdc_sr = 0; - - /* Make sure card exists */ - if (GETB32(SDC_STATUS, SDC_SR_CARD_DETECT_BIT)) - return SDD_CARD_REMOVED; - - /* Clear SDC status bits */ - OUT32(SDC_CLEAR, SDC_RSP_CRC_FAIL_MASK | SDC_RSP_TIMEOUT_MASK | - SDC_RSP_CRC_OK_MASK | SDC_CMD_SENT_MASK); - /*OUT32(SDC_CLEAR, SDC_CLEAR_ALL); */ - - /* Prepare Argument */ - OUT32(SDC_CMD_ARG, arg); - - /* Send command */ - OUT32(SDC_CMD, cmd); - - /* Wait until the command is responsed ... */ - while (retry_cnt++ < SD_CMD_MAX_RETRY_COUNT) { - - sdc_sr = IN32(SDC_STATUS); - - /* Make sure card exists */ - if (sdc_sr & SDC_SR_CARD_DETECT_BIT) - return SDD_CARD_REMOVED; - - /* Check error status */ - if (sdc_sr & SDC_SR_RSP_CRC_OK_MASK) { - - rsp->r[0] = IN32(SDC_R0); - rsp->r[1] = IN32(SDC_R1); - rsp->r[2] = IN32(SDC_R2); - rsp->r[3] = IN32(SDC_R3); - - return HAL_SUCCESS; - } - else if (sdc_sr & SDC_SR_RSP_CRC_FAIL_MASK) { - - return SDD_RSP_CRC_ERROR; - } - else if (sdc_sr & SDC_SR_RSP_TIMEOUT_MASK) { - - return SDD_RSP_TIMEOUT; - } - } - - return SDD_CMD_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd0 - * - * DESCRIPTION - * - * This function issues SD command GO_IDLE_STATE: Reset all cards to idle - * state. - * - * Class: 0 (basic commands) - * - * State Transition: - * idle -> idle - * - * Argument: - * [31:0] stuff bits - * - * Response: - * None - * - * INPUTS - * - * None. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd0(void) -{ - return _sd_cmd(SDC_CMD0_GO_IDLE_STATE); -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd2 - * - * DESCRIPTION - * - * This function issues SD command ALL_SEND_CID: Ask any card to send the - * CID numbers - * - * Class: 0 (basic commands) - * - * State Transition: - * ready -> identification - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R2 [127:1] CID - * - * INPUTS - * - * cid : Pointer to SD_CID struct. - * - * OUTPUTS - * - * cid : SD_CID struct which holds the card's CID register value. - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd2(SD_CID * cid) -{ - return _sd_cmd_r128(SDC_CMD2_ALL_SEND_CID, cid); -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd3 - * - * DESCRIPTION - * - * This function issues SD command SEND_RELATIVE_ADDR: Ask the card to - * publish a new RCA. - * - * Class: 0 (basic commands) - * - * State Transition: - * identification -> standby - * standy -> standby - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R6 [23:08] card status bits: 23, 22, 19, 12:0 - * [39:24] New publishded RCA - * - * INPUTS - * - * rca : Pointer to SD_R32 struct to receive RCA. - * - * OUTPUTS - * - * rca : SD_R32 struct where RCA will be placed at [31:16]. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd3(SD_R32 * rca) -{ - return _sd_cmd_r32(SDC_CMD3_SEND_RELATIVE_ADDR, rca); -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd4 - * - * DESCRIPTION - * - * This function issues SD command SET_DSR: Program DSR of all cards. - * - * Class: 0 (basic commands) - * - * State Transition: - * standy -> standby - * - * Argument: - * [31:16] DSR - * - * Response: - * None - * - * INPUTS - * - * dsr : uint32_t value where DSR is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd4(uint32_t dsr) -{ - return _sd_cmd_arg(SDC_CMD4_SET_DSR, dsr); -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd7 - * - * DESCRIPTION - * - * This function issues SD command SELECT/DESELECT_CARD: Toggles between - * standby and transfer states or between programming and disconnect - * states. Cards with matching RCA is selected, otherwise deselected. - * - * Class: 0 (basic commands) - * - * State Transition: - * selected card: - * standby -> transfer - * disconnected -> programming - * deselected card - * standby -> standby - * transfer -> standby - * sending-data -> standby - * programming -> disconnected - * - * Argument: - * [31:16] RCA - * - * Response: - * R1b [39:8] card status - * DAT0 busy signal - * - * INPUTS - * - * rca : SD_R32 struct where RCA is at [31:16]. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd7(uint32_t rca, SD_R32 * csr) -{ - uint32_t status = _sd_cmd_arg_r32(SDC_CMD7_SELECT_DESELECT_CARD, rca, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd8 - * - * DESCRIPTION - * - * This function issues SD command SEND_IF_COND: Send VHS to SD card before - * issuing ACMD41 during initialization and identification process. - * - * Class: 0 (basic commands) - * - * State Transition: - * idle -> idle - * - * Argument: - * [11:8] VHS (see R7 bellow) - * [ 7:0] Arbitrary Check Pattern (10101010b(0xaa) is suggested) - * - * Response: - * R7 [19:16] voltage accepted (VHS) - * 0001b (0x01) -> 2.7-3.6v - * others are reserved or undefined - * - * INPUTS - * - * vhs_arg: uint32_t value with VHS at [11:8] and check-ptn at [7:0]. - * vhs_rsp: Pointer to SD_R32 struct to hold the response. - * - * OUTPUTS - * - * vhs_rsp: SD_R32 struct with VHS at [11:8] and check-ptn at [7:0]. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd8(uint32_t vhs_arg, SD_R32 * vhs_rsp) -{ - return _sd_cmd_arg_r32(SDC_CMD8_SEND_IF_COND, vhs_arg, vhs_rsp); -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd9 - * - * DESCRIPTION - * - * This function issues SD command SEND_CSD: Ask addressed card to send its - * CSD on the command line. - * - * Class: 0 (basic commands) - * - * State Transition: - * standby -> standby - * - * Argument: - * [31:16] RCA - * - * Response: - * R2 [127:1] CSD - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * csd : Pointer to SD_CSD struct. - * - * OUTPUTS - * - * csd : SD_CSD struct which contains CSD response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd9(uint32_t rca, SD_CSD * csd) -{ - return _sd_cmd_arg_r128(SDC_CMD9_SEND_CSD, rca, csd); -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd10 - * - * DESCRIPTION - * - * This function issues SD command SEND_CID: Ask addressed card to send its - * CID on the command line. - * - * Class: 0 (basic commands) - * - * State Transition: - * standby -> standby - * - * Argument: - * [31:16] RCA - * - * Response: - * R2 [127:1] CID - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * cid : Pointer to SD_CID struct. - * - * OUTPUTS - * - * cid : SD_CID struct which contains CID response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd10(uint32_t rca, SD_CID * cid) -{ - return _sd_cmd_arg_r128(SDC_CMD10_SEND_CID, rca, cid); -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd12 - * - * DESCRIPTION - * - * This function issues SD command STOP_TRANSMISSION: Forces the card to - * stop transmission. - * - * Class: 0 (basic commands) - * - * State Transition: - * snedning-data -> transfer - * receiving-data -> programming - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R1b [39:8] card status - * DAT0 busy signal - * - * INPUTS - * - * csr : Pointer to SD_R32 value. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd12(SD_R32 * csr) -{ - uint32_t status = _sd_cmd_r32(SDC_CMD12_STOP_TRANSMISSION, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) /* todo: ok to check all error bits */ - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd13 - * - * DESCRIPTION - * - * This function issues SD command SEND_STATUS: Ask the card to send its - * card status. - * - * Class: 0 (basic commands) - * - * State Transition: - * standby -> standby - * transfer -> transfer - * sending-data -> sending-data - * receiving-data -> receieving-data - * programming -> programming - * disconnect -> disconnect - * - * Argument: - * [31:16] RCA - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * csr : Pointer to SD_R32 to receive CSR. - * - * OUTPUTS - * - * csr : SD_R32 which holds the received CSR. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd13(uint32_t rca, SD_R32 * csr) -{ - uint32_t status = _sd_cmd_arg_r32(SDC_CMD13_SEND_STATUS, rca, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd15 - * - * DESCRIPTION - * - * This function issues SD command GO_INACTIVE_STATE: Inactivate the - * addressed card to inactive state. - * - * Class: 0 (basic commands) - * - * State Transition: - * standby -> inactive - * transfer -> inactive - * sending-data -> inactive - * receiving-data -> inactive - * programming -> inactive - * disconnect -> inactive - * - * Argument: - * [31:16] RCA - * [15: 0] Should be 0! - * - * Response: - * None - * - * INPUTS - * - * rca : uint32_t value with RCA at [31:16], 0 at [15:0]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd15(uint32_t rca) -{ - return _sd_cmd_arg(SDC_CMD15_GO_INACTIVE_STATE, rca); -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd16 - * - * DESCRIPTION - * - * This function issues SD command SET_BLOCKLEN: Set block length (bytes) - * for standard capacity SD cards. SDHC is fixed to 512 bytes and ignores - * this field except the LOCK_UNLOCK command. - * - * Class: 2/4/7 (block-oriented read/write/lock_unlock commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [31:0] block length - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * blk_len: uint32_t block length value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd16(uint32_t blk_len, SD_R32 * csr) -{ - uint32_t status = _sd_cmd_arg_r32(SDC_CMD16_SET_BLOCKLEN, blk_len, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd17 - * - * DESCRIPTION - * - * This function issues SD command READ_SINGLE_BLOCK: Reads a single block - * size of data. - * - * Class: 2 (block-oriented read commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31:0] data address (byte-unit for SD, block unit for SDHC) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd17(uint32_t addr, SD_R32 * csr) -{ -#if 0 - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { -#endif - /* Send SD command */ - uint32_t status = - _sd_cmd_arg_r32(SDC_CMD17_READ_SINGLE_BLOCK, addr, csr); - if (status != HAL_SUCCESS) { - return status; - } - - /* Check error status */ - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; -#if 0 - /* Check whether make transition to sending-data state */ - switch (SD_CSR_GET_CURRENT_STATE(*csr)) { - case SD_STATE_DATA: - /* The card is ready to send out data */ - return HAL_SUCCESS; - case SD_STATE_TRAN: - /* Repeat previous command until the card get to the state */ - break; - case SD_STATE_STBY: - case SD_STATE_RCV: - case SD_STATE_PRG: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before deselecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -#else - return HAL_SUCCESS; -#endif -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd18 - * - * DESCRIPTION - * - * This function issues SD command READ_MULTIPLE_BLOCK: Reads blocks of data - * from card continuously until a STOP_TRANSMISSION command. - * - * Class: 2 (block-oriented read commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31:0] data address (byte-unit for SD, block unit for SDHC) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd18(uint32_t addr, SD_R32 * csr) { -#if 0 - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { -#endif - /* Send SD command */ - uint32_t status = - _sd_cmd_arg_r32(SDC_CMD18_READ_MULTIPLE_BLOCK, addr, - csr); - if (status != HAL_SUCCESS) { - return status; - } - - /* Check error status */ - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; -#if 0 - /* Check whether make transition to sending-data state */ - switch (SD_CSR_GET_CURRENT_STATE(*csr)) { - case SD_STATE_DATA: - /* The card is ready to send out data */ - return HAL_SUCCESS; - case SD_STATE_TRAN: - /* Repeat previous command until the card get to the state */ - break; - case SD_STATE_STBY: - case SD_STATE_RCV: - case SD_STATE_PRG: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before deselecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -#else - return HAL_SUCCESS; -#endif -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd24 - * - * DESCRIPTION - * - * This function issues SD command WRITE_SINGLE_BLOCK: Writes a single - * block size of data. - * - * Class: 2 (block-oriented write commands) - * - * State Transition: - * transfer -> receiving-data - * - * Argument: - * [31:0] data address (byte-unit for SD, block unit for SDHC) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd24(uint32_t addr, SD_R32 * csr) { -#if 0 - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { -#endif - /* Send SD command */ - uint32_t status = _sd_cmd_arg_r32(SDC_CMD24_WRITE_BLOCK, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - /* Check error status */ - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; -#if 0 - /* Check whether make transition to sending-data state */ - switch (SD_CSR_GET_CURRENT_STATE(*csr)) { - case SD_STATE_RCV: - /* The card is ready to send out data */ - return HAL_SUCCESS; - case SD_STATE_TRAN: - /* Repeat previous command until the card get to the state */ - break; - case SD_STATE_STBY: - case SD_STATE_DATA: - case SD_STATE_PRG: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before deselecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -#else - return HAL_SUCCESS; -#endif -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd25 - * - * DESCRIPTION - * - * This function issues SD command WRITE_MULTIPLE_BLOCK: Writes blocks of - * data to the card continuously until a STOP_TRANSMISSION command. - * - * Class: 2 (block-oriented write commands) - * - * State Transition: - * transfer -> receiving-data - * - * Argument: - * [31:0] data address (byte-unit for SD, block unit for SDHC) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd25(uint32_t addr, SD_R32 * csr) { -#if 0 - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { -#endif - /* Send SD command */ - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD25_WRITE_MULTIPLE_BLOCK, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - /* Check error status */ - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; -#if 0 - /* Check whether make transition to sending-data state */ - switch (SD_CSR_GET_CURRENT_STATE(*csr)) { - case SD_STATE_RCV: - /* The card is ready to send out data */ - return HAL_SUCCESS; - case SD_STATE_TRAN: - /* Repeat previous command until the card get to the state */ - break; - case SD_STATE_STBY: - case SD_STATE_DATA: - case SD_STATE_PRG: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before deselecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -#else - return HAL_SUCCESS; -#endif -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd27 - * - * DESCRIPTION - * - * This function issues SD command PROGRAM_CSD: Programming the - * programmable bits of the CSD (using DATx lines). - * - * Class: 2 (block-oriented write commands) - * - * State Transition: - * transfer -> receiving-data - * - * Argument: - * [31:0] stufing bits - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd27(SD_R32 * csr) { - - uint32_t status = _sd_cmd_r32(SDC_CMD27_PROGRAM_CSD, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd28 - * - * DESCRIPTION - * - * This function issues SD command SET_WRITE_PROT: Sets the write protection - * bits of the addressed group, if supported. (Not supported in SDHC) - * - * Class: 6 (block-oriented write protection commands) - * - * State Transition: - * transfer -> programming - * - * Argument: - * [31:0] data address (byte unit) - * - * Response: - * R1b [39:8] card status - * DAT0 busy signal - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd28(uint32_t addr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD28_SET_WRITE_PROT, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd29 - * - * DESCRIPTION - * - * This function issues SD command CLR_WRITE_PROT: Clears the write - * protection bits of the addressed group, if supported. - * (Not supported in SDHC) - * - * Class: 6 (block-oriented write protection commands) - * - * State Transition: - * transfer -> programming - * - * Argument: - * [31:0] data address (byte unit) - * - * Response: - * R1b [39:8] card status - * DAT0 busy signal - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd29(uint32_t addr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD29_CLR_WRITE_PROT, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd30 - * - * DESCRIPTION - * - * This function issues SD command SEND_WRITE_PROT: Ask the card to send - * the status of the protection bits of the addressed group, if supported. - * (Not supported in SDHC) - * - * Class: 6 (block-oriented write protection commands) - * - * State Transition: - * transfer -> receiving-data - * - * Argument: - * [31:0] data address (byte unit) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd30(uint32_t addr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD30_SEND_WRITE_PROT, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd32 - * - * DESCRIPTION - * - * This function issues SD command ERASE_WR_BLK_START: Sets the address of - * the first write block to be erased. - * - * Class: 5 (erase commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [31:0] data address (SD: byte unit, SDHC: block unit) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd32(uint32_t addr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD32_ERASE_WR_BLK_START, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd33 - * - * DESCRIPTION - * - * This function issues SD command ERASE_WR_BLK_END: Sets the address of - * the last write block of a continuous range to be erased. - * - * Class: 5 (erase commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [31:0] data address (SD: byte unit, SDHC: block unit) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd33(uint32_t addr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD33_ERASE_WR_BLK_END, addr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd38 - * - * DESCRIPTION - * - * This function issues SD command ERASE: Erase all previously selected - * write blocks. - * - * Class: 5 (erase commands) - * - * State Transition: - * transfer -> programming - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R1 [39:8] card status - * DAT0 busy signal - * - * INPUTS - * - * addr : uint32_t address value. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd38(SD_R32 * csr) { - - uint32_t status = _sd_cmd_r32(SDC_CMD38_ERASE, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd42 - * - * DESCRIPTION - * - * This function issues SD command LOCK_UNLOCK: Set/reset the password or - * lock/unlock the card. - * - * Class: 7 (lock card) - * - * State Transition: - * transfer -> receiving-data - * - * Argument: - * [31:0] should be all 0! - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd42(SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD42_LOCK_UNLOCK, 0, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd55 - * - * DESCRIPTION - * - * This function issues SD command APP_CMD: Indicates the next command is - * an application specific command. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * idle -> idle - * standby -> standby - * transfer -> transfer - * sending-data -> sending-data - * receiving-data -> receiving-data - * programming -> programming - * disconnected -> disconnected - * - * Argument: - * [31:16] RCA - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_cmd55(uint32_t rca, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32(SDC_CMD55_APP_CMD, rca, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd56 - * - * DESCRIPTION - * - * This function issues SD command GEN_CMD: To transfer data block from/to - * the card for general-purpose/application-specific commands. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * RD/WR = 0 (write) - * transfer -> receiving-data - * RD/WR = 1 (read) - * transfer -> sending-data - * - * Argument: - * [31: 1] stuff bits - * [0] RD/WR - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * rdwr : uint32_t value where bit [0] is RD/WR. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd56(uint32_t rdwr, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32(SDC_CMD56_GEN_CMD, rdwr, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd6 - * - * DESCRIPTION - * - * This function issues SD command SET_BUS_WIDTH: Defines the data bus - * width to be used for data transfer. The allowed bus widths are given - * in the SCR register. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [31:2] stuff bits - * [ 1:0] bus width (00b -> 1bit, 10b -> 4bits) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * bw : uint32_t value where bit [1:0] is bus width. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_acmd6(uint32_t bw, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_ACMD6_SET_BUS_WIDTH, bw, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd13 - * - * DESCRIPTION - * - * This function issues SD command SD_STATUS: Send the SD status. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_acmd13(SD_R32 * csr) { - - uint32_t status = _sd_cmd_r32(SDC_ACMD13_SD_STATUS, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd22 - * - * DESCRIPTION - * - * This function issues SD command SEND_NUM_WR_BLOCKS: Send the number of - * non-error write blocks. - * - * If (WRITE_BL_PARTIAL == 0) - * unit of ACMD22 is 512 bytes - * else - * unit of ACMD22 is a block length of write command - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_acmd22(SD_R32 * csr) { - - uint32_t status = _sd_cmd_r32 (SDC_ACMD22_SEND_NUM_WR_BLOCKS, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd23 - * - * DESCRIPTION - * - * This function issues SD command SET_WR_BLK_ERASE_COUNT: Send the number - * of write blocks to be pre-erased before writing (for faster multiple- - * block-WR command). Default is 1. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [31:23] stuff bits - * [22: 0] number of blocks - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * blocks : uint32_t value represents the number of blocks. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_acmd23(uint32_t blocks, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_ACMD23_SET_WR_BLK_ERASE_COUNT, blocks, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd41 - * - * DESCRIPTION - * - * This function issues SD command SD_SEND_OP_COND: Send HCS and get OCR - * during the initialization and identification process. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * idle -> ready (OCR check OK and card is not busy) - * idle -> idle (OCR check OK and card is busy) - * idle -> inactive (OCR check fails) - * idle -> idle (query mode) - * - * Argument: - * [30] HCS (OCR[32]) - * [23:0] Vdd voltage window (OCR[23:0]) - * - * Response: - * R3 [39:8] OCR - * - * INPUTS - * - * hcs : uint32_t value represents the host capacity support information. - * ocr : Pointer to SD_OCR struct. - * - * OUTPUTS - * - * ocr : SD_OCR struct which holds the R3/OCR response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_acmd41(uint32_t hcs, SD_OCR * ocr) { - - return _sd_cmd_arg_r32 (SDC_ACMD41_SD_SEND_OP_COND, hcs, ocr); -} - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd42 - * - * DESCRIPTION - * - * This function issues SD command SET_CLR_CARD_DETECT: Connect/Disconnect - * the 50 KOmh pull-up resister on CD/DAT3 (pin1) of the card. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> transfer - * - * Argument: - * [0] set_cd (1: connect, 0: disconnect) - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * conn : uint32_t value where [0] denotes set_cd. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_acmd42(uint32_t conn, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_ACMD42_SET_CLR_CARD_DETECT, conn, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -/***************************************************************************** - * FUNCTION - * - * _sd_acmd51 - * - * DESCRIPTION - * - * This function issues SD command SEND_SCR: Reads the SD configuration - * register (SCR). - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31:0] stuff bits - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_acmd51(SD_R32 * csr) { - - uint32_t status = _sd_cmd_r32(SDC_ACMD51_SEND_SCR, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_cmd6 - * - * DESCRIPTION - * - * This function issues SD command SWITCH_FUNC: Check switchable function - * or switch card function. - * - * Class: 8 (application-specific commands) - * - * State Transition: - * transfer -> sending-data - * - * Argument: - * [31] mode (0: check, 1: switch) - * [30:24] should be 0 - * [23:20] 00h or 0fh (reserved for function group 6) - * [19:16] 00h or 0fh (reserved for function group 5) - * [15:12] 00h or 0fh (reserved for function group 4) - * [11: 8] 00h or 0fh (reserved for function group 3) - * [ 7: 4] function group 2 for command system - * [ 3: 0] function group 1 for access mode - * - * Response: - * R1 [39:8] card status - * - * INPUTS - * - * mode : uint32_t value which holds the function mode. - * csr : Pointer to SD_R32 struct. - * - * OUTPUTS - * - * csr : SD_R32 struct which holds the R1 response. - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -uint32_t _sd_cmd6(uint32_t mode, SD_R32 * csr) { - - uint32_t status = _sd_cmd_arg_r32 (SDC_CMD6_SWITCH_FUNC, mode, csr); - - if (status != HAL_SUCCESS) - return status; - - if (SD_CSR_CHECK_ERROR_BITS(*csr)) - return SDD_CSR_ERROR; - - return HAL_SUCCESS; -} -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -#if 0 -/***************************************************************************** - * FUNCTION - * - * _sd_wait_sending_state - * - * DESCRIPTION - * - * This function waits the transfer state make transition to the sending- - * data state. This is equivalent to waiting for the card start to send - * out data after cmd17 or cmd18. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_wait_sending_state(uint32_t rca) { - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < - SD_TRANSFER_MAX_RETRY_COUNT) { - /* Get current state */ - status = - _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - switch (SD_CSR_GET_CURRENT_STATE - (sd_rsp32)) { - case SD_STATE_DATA: - return HAL_SUCCESS; - case SD_STATE_TRAN: - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_STBY: - case SD_STATE_RCV: - case SD_STATE_DIS: - case SD_STATE_PRG: - default: - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_wait_receiving_state - * - * DESCRIPTION - * - * This function waits the transfer state make transition to the receiving- - * data state. This is equivalent to waiting for the card start to receive - * data after cmd24/25/27/42/56. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_wait_receiving_state(uint32_t rca) { - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < - SD_TRANSFER_MAX_RETRY_COUNT) { - /* Get current state */ - status = - _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - switch (SD_CSR_GET_CURRENT_STATE - (sd_rsp32)) { - case SD_STATE_RCV: - if (SD_CSR_GET_READY_FOR_DATA(sd_rsp32)) - return - HAL_SUCCESS; - break; - case SD_STATE_TRAN: - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_STBY: - case SD_STATE_DATA: - case SD_STATE_DIS: - case SD_STATE_PRG: - default: - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} -#endif /* 0 */ - -/***************************************************************************** - * FUNCTION - * - * _sd_wait_programmed - * - * DESCRIPTION - * - * This function waits the disconnected state make transition to the - * standby state or the transfer state. This is equivalent to waiting for - * the completion of programming. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_wait_programmed(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_TRANSFER_MAX_RETRY_COUNT) { - - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - switch (SD_CSR_GET_CURRENT_STATE - (sd_rsp32)) { - case SD_STATE_STBY: - case SD_STATE_TRAN: - return HAL_SUCCESS; - case SD_STATE_DIS: - case SD_STATE_PRG: - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DATA: - case SD_STATE_RCV: - default: - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_wait_transferred - * - * DESCRIPTION - * - * This function waits the data/rcv/prog state make transition to the - * transfer state. This is equivalent to waiting for the - * completion of all current data transfer traffic. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_wait_transferred(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_TRANSFER_MAX_RETRY_COUNT) { - - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - - case SD_STATE_TRAN: - return HAL_SUCCESS; - case SD_STATE_DATA: - case SD_STATE_RCV: - case SD_STATE_PRG: - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_STBY: - case SD_STATE_DIS: - default: - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_disconnect - * - * DESCRIPTION - * - * This function forces the prog state make transition to the - * disconnect state. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_disconnect(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - /* Perform state transition according to spec 2.0 fig 4-3. */ - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - - case SD_STATE_STBY: - case SD_STATE_DIS: - /* The card with the target rca is already disconnected. Just */ - /* return that the card is disconnected successfully. */ - return HAL_SUCCESS; - case SD_STATE_PRG: - /* Try to enter disconnected state ... */ - status = _sd_cmd7(rca, &sd_rsp32); /* disconnect the card */ - if (status != HAL_SUCCESS) - return status; - break; - case SD_STATE_TRAN: - case SD_STATE_DATA: - case SD_STATE_RCV: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - default: - /* Invalid current state before disconnect the card. */ - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_connect - * - * DESCRIPTION - * - * This function forces the disconnect state make transition to the - * programming state. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_connect(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { - - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - /* Perform state transition according to spec 2.0 fig 4-3. */ - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - case SD_STATE_PRG: - case SD_STATE_TRAN: - /* - * The card with the target rca is already connected. Just - * return that the card is connected successfully. - */ - return HAL_SUCCESS; - case SD_STATE_DIS: - /* Try to enter programming state ... */ - status = _sd_cmd7(rca, &sd_rsp32); /* connect the card */ - if (status != HAL_SUCCESS) - return status; - break; - case SD_STATE_STBY: - case SD_STATE_DATA: - case SD_STATE_RCV: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - default: - /* Invalid current state before connect the card. */ - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_deselect_card - * - * DESCRIPTION - * - * This function forces the transfer state make transition to the - * standby state. - * - * If the card is currently in data or transfer state, the function will - * issue trnasition command and continue loop until the card enters standby - * state. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_deselect_card(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - /* Perform state transition according to spec 2.0 fig 4-3. */ - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - - case SD_STATE_STBY: - /* - * The card with the target rca is already deselected. Just - * return that the card is deselected successfully. - */ - return HAL_SUCCESS; - case SD_STATE_TRAN: - case SD_STATE_DATA: - /* Try to enter standby state ... */ - status = _sd_cmd7(rca, &sd_rsp32); /* deselect the card */ - if (status != HAL_SUCCESS) - return status; - break; - case SD_STATE_RCV: - case SD_STATE_PRG: - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before deselecting the card. */ - return - SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_select_card - * - * DESCRIPTION - * - * This function forces the standby state make transition to the - * transfer state. - * - * If the card is currently in data/rcv state, the function will wait for - * a limitted time. After timeout, it forces to stop the current - * operation and try to make transition back to standby state. - * - * If the card is currently in the prog state, the function will wait for - * a limitted time. If timeout then it will return that failed to make - * the desired state transition. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_select_card(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - uint32_t retry = 0; - - while (retry++ < SD_STATE_MAX_RETRY_COUNT) { - - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - /* Perform state transition according to spec 2.0 fig 4-3. */ - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - - case SD_STATE_TRAN: - /* - * The card with the target rca is already selected. Just - * return that the card is selected successfully. - */ - return HAL_SUCCESS; - case SD_STATE_STBY: - /* Try to enter transfer state ... */ - status = _sd_cmd7(rca, &sd_rsp32); /* select the card */ - if (status != HAL_SUCCESS) - return status; - break; - case SD_STATE_DATA: - case SD_STATE_RCV: - /* - * The card is still transferring data or programming. - * Wait a short period for transfer completion. The - * card will back to transfer state after operation - * completion. - */ - status = _sd_wait_transferred (rca); - - if (status == HAL_SUCCESS) { - - return HAL_SUCCESS; - } - else if (status == SDD_WAIT_TIMEOUT) - { - /* - * Stop the current transmission after waiting timeout. Then - * continue status check loop to fall back to transfer state. - */ - status = _sd_cmd12(&sd_rsp32); /* stop transmission */ - if (status != HAL_SUCCESS) - return status; - } - else { - return status; - } - break; - case SD_STATE_PRG: - - status = _sd_wait_transferred (rca); - if (status != HAL_SUCCESS) - return status; - - break; - case SD_STATE_DIS: - /* Continue status check loop to fall back to standby state. */ - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - default: - /* Invalid current state before selecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} - -/***************************************************************************** - * FUNCTION - * - * _sd_stop_transmission - * - * DESCRIPTION - * - * This function forces the data/rcv/prog state make transition to the - * transfer state. - * - * If the card is currently in data/rcv state, the function will issue - * stop command directly. Then continue check loop to wait for back to - * the transfer or standby state. - * - * If the card is currently in the prog state, the function will wait for - * a limitted time. If timeout then it will return that failed to make - * the desired state transition. - * - * INPUTS - * - * rca : uint32_t value where RCA is at [31:16]. - * - * OUTPUTS - * - * uint32_t : Returns HAL_SUCCESS if successful, - * else positive value is SDD-specific error code, - * else negative value is NU system error code. - * - ****************************************************************************/ -uint32_t _sd_stop_transmission(uint32_t rca) { - - uint32_t status; - SD_R32 sd_rsp32; - - while (1) { - - // _nds_kwait(0x1000); - - /* Get current state */ - status = _sd_cmd13(rca, &sd_rsp32); - if (status != HAL_SUCCESS) - return status; - - /* Perform state transition according to spec 2.0 fig 4-3. */ - switch (SD_CSR_GET_CURRENT_STATE (sd_rsp32)) { - - case SD_STATE_STBY: - case SD_STATE_TRAN: - /* The card with the target rca is already stopped. Just */ - /* return that the card is stopped successfully. */ - return HAL_SUCCESS; - case SD_STATE_DATA: - case SD_STATE_RCV: - /* Try to back to transfer state ... */ - status = _sd_cmd12(&sd_rsp32); /* stop transmission */ - if (status != HAL_SUCCESS) - return status; - break; - case SD_STATE_PRG: - /* The card is still transferring data or programming. */ - /* Wait a short period for transfer completion. The */ - /* card will back to transfer state after operation */ - /* completion. */ - status = _sd_wait_transferred (rca); - if (status != HAL_SUCCESS) - return status; - - break; - case SD_STATE_IDLE: - case SD_STATE_READY: - case SD_STATE_IDENT: - case SD_STATE_DIS: - default: - /* Invalid current state before selecting the card. */ - return SDD_INVALID_STATE; - } - } - - return SDD_WAIT_TIMEOUT; -} diff --git a/bsp/AE210P/driver/sd/sdd_sd.h b/bsp/AE210P/driver/sd/sdd_sd.h deleted file mode 100644 index cefd1c2b89..0000000000 --- a/bsp/AE210P/driver/sd/sdd_sd.h +++ /dev/null @@ -1,927 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Sep.26.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sdd_sd.h - * - * DESCRIPTION - * - * Secure digital card specification 2.0 definition. - * - * Currently only Secure Digital Memory standards are well-defined. - * Remaining spec mostly are left for future developers. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * None - * - ****************************************************************************/ -#ifndef __SDD_SD_H__ -#define __SDD_SD_H__ - -#include - -/***************************************************************************** - * Secure Digital Memory Card Register Definitions - * - * Summary: - * read program - * ---- -------- ---------------------------------------------- --------------------- - * OCR 32 bits CMD8_SEND_IF_COND/R7 ACMD41_SD_SEND_OP_COND/R3 - * CID 128 bits CMD2_ALL_SEND_CIS/R2 CMD10_SEND_CID/R2 - * CSD 128 bits CMD9_SEND_CSD/R2 CMD27_PROGRAM_CSD/R1 - * SCR 64 bits ACMD51_SEND_SCR/R1 - * RCA 16 bits CMD3_SEND_RELATIVE_ADDR/R6 - * DSR 16 bits CMD4_SET_DSR - * CSR 32 bits CMD13_SEND_STATUS/R1 - * SSR 512 bits ACMD13_SD_STATUS/R1 - * - * Responses: - * R1 48 bits (cmd) (normal response reg) - * [45:40] cmd_idx [39:08] CSR [7:1] CRC - * R1b 48 bits (cmd) busy signal (dat) - * [45:40] cmd_idx [39:08] CSR [7:1] CRC - * R2 136 bits (cmd) (CID, CSD reg) - * [127:1] CID/CSD (CRC included) - * R3 48 bits (cmd) (OCR reg)) - * [39:8] OCR - * R6 48 bits (cmd) (RCA reg) - * [45:40] cmd_idx (0x03 CMD3) [39:24] New published RCA [23:8] CSR 23,22,19,12-0 - * R7 48 bits (cmd) (card interface condition reg) - * [45:40] cmd_idx [19:16] voltage (0x01: 2.7~3.6V) [15:8] check-echo [7:1] CRC - * - ****************************************************************************/ - -/* General Form 32-bit Response */ -typedef struct _SD_R32 { - /* - * Note: The bitfields definition was not applied due to that the - * core architecture may be switched between big-endian - * and little endian. We don't want to define two structures - * to switch between the two endain architectures. Users - * could use following macros to extract the target member. - */ - union { - uint32_t r[1]; - uint8_t b[4]; - }; -} SD_R32; - -/* General Form 128-bit Response */ -typedef struct _SD_R128 { - /* - * Note: The bitfields definition was not applied due to that the - * core architecture may be switched between big-endian - * and little endian. We don't want to define two structures - * to switch between the two endain architectures. Users - * could use following macros to extract the target member. - */ - union { - uint32_t r[4]; - uint8_t b[16]; - }; -} SD_R128; - -/* R6 Response Fields (Width: 32 bits) */ -#define SD_R6_GET_RCA(r32) ((uint32_t)((r32).r[0]) & 0xffff0000) -#define SD_R6_GET_CSR(r32) ((uint32_t)((r32).r[0]) & 0x0000ffff) -#define SD_R6_GET_CSR_ERR(r32) ((uint32_t)((r32).r[0]) & 0x0000e000) - -/* R7 Response Fields (Width: 32 bits) */ -#define SD_R7_GET_VHS(r32) (((uint32_t)((r32).r[0]) >> 8) & 0x0f) -#define SD_R7_GET_PTN(r32) ((uint32_t)((r32).r[0]) & 0xff) - -/* OCR - Operation Condition Register (Width: 32 bits */ -/* Readback: ACMD41_SD_SEND_OP_COND/R3 */ -typedef SD_R32 SD_OCR; - -#define SD_OCR_VDD_MASK 0x00ffffff /* VDD voltage window */ -#define SD_OCR_VDD_SHIFT 0 -#define SD_OCR_VDD_2_7 0x00008000 /* VDD 2.7 ~ 2.8 */ -#define SD_OCR_VDD_2_8 0x00010000 /* VDD 2.8 ~ 2.9 */ -#define SD_OCR_VDD_2_9 0x00020000 /* VDD 2.9 ~ 3.0 */ -#define SD_OCR_VDD_3_0 0x00040000 /* VDD 3.0 ~ 3.1 */ -#define SD_OCR_VDD_3_1 0x00080000 /* VDD 3.1 ~ 3.2 */ -#define SD_OCR_VDD_3_2 0x00100000 /* VDD 3.2 ~ 3.3 */ -#define SD_OCR_VDD_3_3 0x00200000 /* VDD 3.3 ~ 3.4 */ -#define SD_OCR_VDD_3_4 0x00400000 /* VDD 3.4 ~ 3.5 */ -#define SD_OCR_VDD_3_5 0x00800000 /* VDD 3.5 ~ 3.6 */ -#define SD_OCR_VDD_2_7V_3_6V (SD_OCR_VDD_2_7 | SD_OCR_VDD_2_8 | SD_OCR_VDD_2_9 | SD_OCR_VDD_3_0 | \ - SD_OCR_VDD_3_1 | SD_OCR_VDD_3_2 | SD_OCR_VDD_3_3 | SD_OCR_VDD_3_4 | SD_OCR_VDD_3_5) - -#define SD_OCR_CCS_MASK 0x40000000 /* Card capacity status */ -#define SD_OCR_CCS_SHIFT 30 -#define SD_CCS_SD 0 -#define SD_CCS_SDHC 1 - -#define SD_OCR_BUSY_MASK 0x80000000 /* Card power up status bit */ -#define SD_OCR_BUSY_SHIFT 31 -#define SD_BUSY 0 -#define SD_POWERUP 1 - -#define SD_OCR_GET_VDD(ocr) (((uint32_t)((ocr).r[0]) & SD_OCR_VDD_MASK) >> SD_OCR_VDD_SHIFT) -#define SD_OCR_GET_CCS(ocr) (((uint32_t)((ocr).r[0]) & SD_OCR_CCS_MASK) >> SD_OCR_CCS_SHIFT) -#define SD_OCR_GET_BUSY(ocr) (((uint32_t)((ocr).r[0]) & SD_OCR_BUSY_MASK) >> SD_OCR_BUSY_SHIFT) - -/* CID - Card Identification Register (Width: 128 bits) */ -/* Readback: CMD10_SEND_CID/R2 */ -typedef SD_R128 SD_CID; - -/* Manufacture ID */ -#define SD_CID_GET_MID(cid) ((uint32_t)((cid).r[3]) >> 24) -#define SD_CID_GET_MID_FROM_R3(r) ((uint32_t)(r) >> 24) - -/* OEM/Application ID */ -#define SD_CID_GET_OID_PTR(cid) ((uint8_t*)&((cid).b[13])) - -/* Product name */ -#define SD_CID_GET_PNM_PTR(cid) ((uint8_t*)&((cid).b[8])) - -/* Product revision (BCD coding) */ -#define SD_CID_GET_PRV(cid) ((uint32_t)((cid).r[1]) >> 24) -#define SD_CID_GET_PRV_FROM_R1(r) ((uint32_t)(r) >> 24) - -/* Product serial number */ -#define SD_CID_GET_PSN(cid) (((uint32_t)((cid).r[1]) << 8) | ((uint32_t)((cid).r[0]) >> 24)) -#define SD_CID_GET_PSN_FROM_R0R1(r0, r1) (((uint32_t)(r1) << 8) | ((uint32_t)(r0) >> 24)) - -/* Manufacturing date (0x0yym, year = 2000 + yy, month = m) */ -#define SD_CID_GET_MDT(cid) (((uint32_t)((cid).r[0]) >> 8) & 0x0fff) -#define SD_CID_GET_MDT_FROM_R0(r) (((uint32_t)(r) >> 8) & 0x0fff) - -/* CRC7 checksum */ -#define SD_CID_GET_CRC(cid) (((uint32_t)((cid).r[0]) >> 1) & 0x007f) -#define SD_CID_GET_CRC_FROM_R0(r) (((uint32_t)(r) >> 1) & 0x007f) - -/* - * CSD - Card-Specific Data Register (Width: 128 bits) - * Readback: CMD9_SEND_CSD/R2 - * Program : CMD27_PROGRAM_CSD/R1 - */ -typedef SD_R128 SD_CSD; - -/* -------------------------- */ -/* CSD v1.0 definitions */ -/* CRC (R/W) */ -#define SD_CSD_GET_CRC(csd) (((uint32_t)((csd).r[0]) >> 1) & 0x0000007f) -#define SD_CSD_GET_CRC_FROM_R0(r) (((uint32_t)(r) >> 1) & 0x0000007f) -#define SD_CSD_SET_CRC(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x7f) << 1)) -#define SD_CSD_SET_CRC_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x7f) << 1)) - -/* File format (R/W1, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_FILE_FORMAT(csd) (((uint32_t)((csd).r[0]) >> 10) & 0x00000003) -#define SD_CSD_GET_FILE_FORMAT_FROM_R0(r) (((uint32_t)(r) >> 10) & 0x00000003) -#define SD_CSD_SET_FILE_FORMAT(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x03) << 10)) -#define SD_CSD_SET_FILE_FORMAT_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x03) << 10)) - -#define SD_FILE_FORMAT_HDD 0 /* Hard disk like file system with partition table */ -#define SD_FILE_FORMAT_FLOPPY 1 /* DOS FAT (floppy like) with boot sector only (no partition table) */ -#define SD_FILE_FORMAT_UNIVERSAL 2 /* Universal file format */ -#define SD_FILE_FORMAT_OTHERS 3 /* Others/Unknown */ - -/* Temporary write protection (R/W) */ -#define SD_CSD_GET_TMP_WRITE_PROTECT(csd) (((uint32_t)((csd).r[0]) >> 12) & 0x00000001) -#define SD_CSD_GET_TMP_WRITE_PROTECT_FROM_R0(r) (((uint32_t)(r) >> 12) & 0x00000001) -#define SD_CSD_SET_TMP_WRITE_PROTECT(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x01) << 12)) -#define SD_CSD_SET_TMP_WRITE_PROTECT_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x01) << 12)) - -/* Permanent write protection (R/W1) */ -#define SD_CSD_GET_PERM_WRITE_PROTECT(csd) (((uint32_t)((csd).r[0]) >> 13) & 0x00000001) -#define SD_CSD_GET_PERM_WRITE_PROTECT_FROM_R0(r) (((uint32_t)(r) >> 13) & 0x00000001) -#define SD_CSD_SET_PERM_WRITE_PROTECT(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x01) << 13)) -#define SD_CSD_SET_PERM_WRITE_PROTECT_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x01) << 13)) - -/* Copy flag (R/W1) */ -#define SD_CSD_GET_COPY(csd) (((uint32_t)((csd).r[0]) >> 14) & 0x00000001) -#define SD_CSD_GET_COPY_FROM_R0(r) (((uint32_t)(r) >> 14) & 0x00000001) -#define SD_CSD_SET_COPY(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x01) << 14)) -#define SD_CSD_SET_COPY_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x01) << 14)) - -/* File format group (R/W1, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_FILE_FORMAT_GRP(csd) (((uint32_t)((csd).r[0]) >> 15) & 0x00000001) -#define SD_CSD_GET_FILE_FORMAT_GRP_FROM_R0(r) (((uint32_t)(r) >> 15) & 0x00000001) -#define SD_CSD_SET_FILE_FORMAT_GRP(csd,v) ((uint32_t)((csd).r[0]) |= (((uint32_t)(v) & 0x01) << 15)) -#define SD_CSD_SET_FILE_FORMAT_GRP_TO_R0(r,v) ((uint32_t)(r) |= (((uint32_t)(v) & 0x01) << 15)) - -/* Partial blocks for write allowed (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_WRITE_BL_PARTIAL(csd) (((uint32_t)((csd).r[0]) >> 21) & 0x00000001) -#define SD_CSD_GET_WRITE_BL_PARTIAL_FROM_R0(r) (((uint32_t)(r) >> 21) & 0x00000001) - -/* Max write data block length (R, fixed to 9 in 2.0) */ -#define SD_CSD_GET_WRITE_BL_LEN(csd) (((uint32_t)((csd).r[0]) >> 22) & 0x0000000f) -#define SD_CSD_GET_WRITE_BL_LEN_FROM_R0(r) (((uint32_t)(r) >> 22) & 0x0000000f) - -/* Write speed factor (R, fixed to 0x02 in 2.0) */ -#define SD_CSD_GET_R2W_FACTOR(csd) (((uint32_t)((csd).r[0]) >> 26) & 0x00000007) -#define SD_CSD_GET_R2W_FACTOR_FROM_R0(r) (((uint32_t)(r) >> 26) & 0x00000007) - -/* Write protect group enable (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_WP_GRP_ENABLE(csd) ((uint32_t)((csd).r[0]) >> 31) -#define SD_CSD_GET_WP_GRP_ENABLE_FROM_R0(r) ((uint32_t)(r) >> 31) - -/* Write protect group size (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_WP_GRP_SIZE(csd) (((uint32_t)((csd).r[1]) >> 0) & 0x0000007f) -#define SD_CSD_GET_WP_GRP_SIZE_FROM_R1(r) (((uint32_t)(r) >> 0) & 0x0000007f) - -/* Erase sector size (R, fixed to 0x7f in 2.0) */ -#define SD_CSD_GET_SECTOR_SIZE(csd) (((uint32_t)((csd).r[1]) >> 7) & 0x0000007f) -#define SD_CSD_GET_SECTOR_SIZE_FROM_R1(r) (((uint32_t)(r) >> 7) & 0x0000007f) - -/* Erase single block enable (R, fixed to 0x01 in 2.0) */ -#define SD_CSD_GET_ERASE_BLK_EN(csd) (((uint32_t)((csd).r[1]) >> 14) & 0x00000001) -#define SD_CSD_GET_ERASE_BLK_EN_FROM_R1(r) (((uint32_t)(r) >> 14) & 0x00000001) - -/* Device size multiplier (R, obsolete in 2.0) */ -#define SD_CSD1_GET_C_SIZE_MULT(csd) (((uint32_t)((csd).r[1]) >> 15) & 0x00000007) -#define SD_CSD1_GET_C_SIZE_MULT_FROM_R1(r) (((uint32_t)(r) >> 15) & 0x00000007) - -/* Max write current at VDD max (R, obsolete in 2.0) */ -#define SD_CSD1_GET_VDD_W_CURR_MAX(csd) (((uint32_t)((csd).r[1]) >> 18) & 0x00000007) -#define SD_CSD1_GET_VDD_W_CURR_MAX_FROM_R1(r) (((uint32_t)(r) >> 18) & 0x00000007) - -/* Max write current at VDD min (R, obsolete in 2.0) */ -#define SD_CSD1_GET_VDD_W_CURR_MIN(csd) (((uint32_t)((csd).r[1]) >> 21) & 0x00000007) -#define SD_CSD1_GET_VDD_W_CURR_MIN_FROM_R1(r) (((uint32_t)(r) >> 21) & 0x00000007) - -/* Max read current at VDD max (R, obsolete in 2.0) */ -#define SD_CSD1_GET_VDD_R_CURR_MAX(csd) (((uint32_t)((csd).r[1]) >> 24) & 0x00000007) -#define SD_CSD1_GET_VDD_R_CURR_MAX_FROM_R1(r) (((uint32_t)(r) >> 24) & 0x00000007) - -/* Max read current at VDD min (R, obsolete in 2.0) */ -#define SD_CSD1_GET_VDD_R_CURR_MIN(csd) (((uint32_t)((csd).r[1]) >> 27) & 0x00000007) -#define SD_CSD1_GET_VDD_R_CURR_MIN_FROM_R1(r) (((uint32_t)(r) >> 27) & 0x00000007) - -#define SD_VDD_CURR_MIN_0P5MA 0 -#define SD_VDD_CURR_MIN_1MA 1 -#define SD_VDD_CURR_MIN_5MA 2 -#define SD_VDD_CURR_MIN_10MA 3 -#define SD_VDD_CURR_MIN_25MA 4 -#define SD_VDD_CURR_MIN_35MA 5 -#define SD_VDD_CURR_MIN_60MA 6 -#define SD_VDD_CURR_MIN_100MA 7 - -#define SD_VDD_CURR_MAX_1MA 0 -#define SD_VDD_CURR_MAX_5MA 1 -#define SD_VDD_CURR_MAX_10MA 2 -#define SD_VDD_CURR_MAX_25MA 3 -#define SD_VDD_CURR_MAX_35MA 4 -#define SD_VDD_CURR_MAX_45MA 5 -#define SD_VDD_CURR_MAX_80MA 6 -#define SD_VDD_CURR_MAX_200MA 7 - -/* Device size (R) */ -#define SD_CSD1_GET_C_SIZE(csd) ((((uint32_t)((csd).r[2]) << 2) & 0x00000fff) | (((uint32_t)((csd).r[1]) >> 30) & 0x00000003)) -#define SD_CSD1_GET_C_SIZE_FROM_R1R2(r1, r2) ((((uint32_t)(r2) << 2) & 0x00000fff) | (((uint32_t)(r1) >> 30) & 0x00000003)) - -/* DSR implemented (R) */ -#define SD_CSD_GET_DSR_IMP(csd) (((uint32_t)((csd).r[2]) >> 12) & 0x00000001) -#define SD_CSD_GET_DSR_IMP_FROM_R2(r) (((uint32_t)(r) >> 12) & 0x00000001) - -/* Read block misaligned (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_READ_BLK_MISALIGN(csd) (((uint32_t)((csd).r[2]) >> 13) & 0x00000001) -#define SD_CSD_GET_READ_BLK_MISALIGN_FROM_R2(r) (((uint32_t)(r) >> 13) & 0x00000001) - -/* Write block misaligned (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_WRITE_BLK_MISALIGN(csd) (((uint32_t)((csd).r[2]) >> 14) & 0x00000001) -#define SD_CSD_GET_WRITE_BLK_MISALIGN_FROM_R2(r) (((uint32_t)(r) >> 14) & 0x00000001) - -/* Partial blocks for read allowed (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_READ_BL_PARTIAL(csd) (((uint32_t)((csd).r[2]) >> 15) & 0x00000001) -#define SD_CSD_GET_READ_BL_PARTIAL_FROM_R2(r) (((uint32_t)(r) >> 15) & 0x00000001) - -/* Max read data block length (R, fixed to 9 in 2.0) */ -#define SD_CSD_GET_READ_BL_LEN(csd) (((uint32_t)((csd).r[2]) >> 16) & 0x0000000f) -#define SD_CSD_GET_READ_BL_LEN_FROM_R2(r) (((uint32_t)(r) >> 16) & 0x0000000f) - -#define SD_BL_LEN_512 9 /* 2^9 */ -#define SD_BL_LEN_1024 10 /* 2^10 */ -#define SD_BL_LEN_2048 11 /* 2^11 */ - -/* Card command classes (R) */ -#define SD_CSD_GET_CCC(csd) (((uint32_t)((csd).r[2]) >> 20) & 0x00000fff) -#define SD_CSD_GET_CCC_FROM_R2(r) (((uint32_t)(r) >> 20) & 0x00000fff) - -#define SD_CCC_CLASS0 0 -#define SD_CCC_CLASS1 1 -#define SD_CCC_CLASS2 2 -#define SD_CCC_CLASS3 3 -#define SD_CCC_CLASS4 4 -#define SD_CCC_CLASS5 5 -#define SD_CCC_CLASS6 6 -#define SD_CCC_CLASS7 7 -#define SD_CCC_CLASS8 8 -#define SD_CCC_CLASS9 9 -#define SD_CCC_CLASS10 10 -#define SD_CCC_CLASS11 11 - -/* Max data transfer rate (R, fixed to 0x32 or 0x5a in 2.0) */ -#define SD_CSD_GET_TRAN_SPEED(csd) ((uint32_t)((csd).r[3]) & 0x000000ff) -#define SD_CSD_GET_TRAN_SPEED_FROM_R3(r) ((uint32_t)(r) & 0x000000ff) - -#define SD_TRAN_SPEED_TU(ts) ((uint32_t)(ts) & 0x07) -#define SD_TRAN_SPEED_TV(ts) (((uint32_t)(ts) >> 3) & 0x0f) - -#define SD_TS_TU_100KBPS 0 -#define SD_TS_TU_1MBPS 1 -#define SD_TS_TU_10MBPS 2 -#define SD_TS_TU_100MBPS 3 - -#define SD_TS_TV_1P0 1 -#define SD_TS_TV_1P2 2 -#define SD_TS_TV_1P3 3 -#define SD_TS_TV_1P5 4 -#define SD_TS_TV_2P0 5 -#define SD_TS_TV_2P5 6 -#define SD_TS_TV_3P0 7 -#define SD_TS_TV_3P5 8 -#define SD_TS_TV_4P0 9 -#define SD_TS_TV_4P5 10 -#define SD_TS_TV_5P0 11 -#define SD_TS_TV_5P5 12 -#define SD_TS_TV_6P0 13 -#define SD_TS_TV_7P0 14 -#define SD_TS_TV_8P0 15 - -/* Data read access-time-2 in CLK cycles (NSAC * 100) (R, fixed to 0x00 in 2.0) */ -#define SD_CSD_GET_NSAC(csd) (((uint32_t)((csd).r[3]) >> 8) & 0x000000ff) -#define SD_CSD_GET_NSAC_FROM_R3(r) (((uint32_t)(r) >> 8) & 0x000000ff) - -/* Data read access-time-1 (R, fixed to 0x0e in 2.0) */ -#define SD_CSD_GET_TAAC(csd) (((uint32_t)((csd).r[3]) >> 16) & 0x0000ffff) -#define SD_CSD_GET_TAAC_FROM_R3(r) (((uint32_t)(r) >> 16) & 0x0000ffff) - -#define SD_TAAC_TU(ac) ((uint32_t)(ac) & 0x07) -#define SD_TAAC_TV(ac) (((uint32_t)(ac) >> 3) & 0x0f) - -#define SD_TAAC_TU_1NS 0 -#define SD_TAAC_TU_10NS 1 -#define SD_TAAC_TU_100NS 2 -#define SD_TAAC_TU_1US 3 -#define SD_TAAC_TU_10US 4 -#define SD_TAAC_TU_100US 5 -#define SD_TAAC_TU_1MS 6 -#define SD_TAAC_TU_10MS 7 - -#define SD_TAAC_TV_1P0 1 -#define SD_TAAC_TV_1P2 2 -#define SD_TAAC_TV_1P3 3 -#define SD_TAAC_TV_1P5 4 -#define SD_TAAC_TV_2P0 5 -#define SD_TAAC_TV_2P5 6 -#define SD_TAAC_TV_3P0 7 -#define SD_TAAC_TV_3P5 8 -#define SD_TAAC_TV_4P0 9 -#define SD_TAAC_TV_4P5 10 -#define SD_TAAC_TV_5P0 11 -#define SD_TAAC_TV_5P5 12 -#define SD_TAAC_TV_6P0 13 -#define SD_TAAC_TV_7P0 14 -#define SD_TAAC_TV_8P0 15 - -/* CSD structure (R) */ -#define SD_CSD_GET_CSD_STRUCTURE(csd) ((uint32_t)((csd).r[3]) >> 30) -#define SD_CSD_GET_CSD_STRUCTURE_FROM_R3(r) ((uint32_t)(r) >> 30) - -/* Get user data size (card memory capacity, not include security protected area) */ -#if 0 -#define SD_CSD1_GET_CAPACITY(csd) (SD_CSD1_GET_C_SIZE(csd) + 1) * \ - (1 << (SD_CSD1_GET_C_SIZE_MULT(csd) + 2)) * \ - (1 << SD_CSD_GET_READ_BL_LEN(csd)) - -#define SD_CSD1_GET_CAPACITY_R1R2(r1,r2) (SD_CSD1_GET_C_SIZE_FROM_R1R2(r1,r2) + 1) * \ - (1 << (SD_CSD1_GET_C_SIZE_MULT_FROM_R1(r1) + 2)) * \ - (1 << SD_CSD_GET_READ_BL_LEN_FROM_R2(r2)) -#endif - -/* -------------------------- */ -/* CSD v2.0 definitions */ -/* */ -/* Device size (R) */ -#define SD_CSD2_GET_C_SIZE(csd) ((((uint32_t)((csd).r[2]) << 16) & 0x003f0000) | ((uint32_t)((csd).r[1]) >> 16)) -#define SD_CSD2_GET_C_SIZE_FROM_R1R2(r1,r2) ((((uint32_t)(r2) << 16) & 0x003f0000) | ((uint32_t)(r1) >> 16)) - -/* Get user data size (card memory capacity, not include security protected area) */ -// #define SD_CSD2_GET_CAPACITY_KB(csd) ((SD_CSD2_GET_C_SIZE(csd) + 1) * 512) -// #define SD_CSD2_GET_CAPACITY_KB_R1R2(r1,r2) ((SD_CSD2_GET_C_SIZE_FROM_R1R2(csd) + 1) * 512) - -/* - * SCR - SD Card Configuration Register - * Width: 64 bits - * Readback: ACMD51_SEND_SCR/R1 - */ -typedef struct _SD_SCR { - /* Note: The bitfields definition was not applied due to that the */ - /* core architecture may be switched between big-endian */ - /* and little endian. We don't want to define two structures */ - /* to switch between the two endain architectures. Users */ - /* could use following macros to extract the target member. */ - union { - uint32_t r[2]; - uint8_t b[8]; - }; -} SD_SCR; - -/* DAT bus widths supported */ -#define SD_SCR_GET_SD_BUS_WIDTHS(scr) (((uint32_t)((scr).r[1]) >> 16) & 0x0000000f) -#define SD_SCR_GET_SD_BUS_WIDTHS_FROM_R1(r) (((uint32_t)(r) >> 16) & 0x0000000f) - -#define SD_BUS_WIDTH_1BIT 1 /* DAT0 */ -#define SD_BUS_WIDTH_4BIT 4 /* DAT0 ~ DAT3 */ - -/* SD security support */ -#define SD_SCR_GET_SD_SECURITY(scr) (((uint32_t)((scr).r[1]) >> 20) & 0x00000007) -#define SD_SCR_GET_SD_SECURITY_FROM_R1(r) (((uint32_t)(r) >> 20) & 0x00000007) - -#define SD_SECURITY_NONE 0 /* no security */ -#define SD_SECURITY_1_01 2 /* version 1.01 */ -#define SD_SECURITY_2_0 3 /* version 2.00 */ - -/* Data status after erases */ -#define SD_SCR_GET_DATA_STAT_AFTER_ERASE(scr) (((uint32_t)((scr).r[1]) >> 23) & 0x00000001) -#define SD_SCR_GET_DATA_STAT_AFTER_ERASE_FROM_R1(r) (((uint32_t)(r) >> 23) & 0x00000001) - -/* SD memory card spec version */ -#define SD_SCR_GET_SD_SPEC(scr) (((uint32_t)((scr).r[1]) >> 24) & 0x0000000f) -#define SD_SCR_GET_SD_SPEC_FROM_R1(r) (((uint32_t)(r) >> 24) & 0x0000000f) - -#define SD_SPEC_1_0 0 /* version 1.0 ~ 1.01 */ -#define SD_SPEC_1_1 1 /* version 1.10 */ -#define SD_SPEC_2_0 2 /* version 2.00 */ - -/* SCR structure */ -#define SD_SCR_GET_SCR_STRUCTURE(scr) (((uint32_t)((scr).r[1]) >> 28) & 0x0000000f) -#define SD_SCR_GET_SCR_STRUCTURE_FROM_R1(r) (((uint32_t)(r) >> 28) & 0x0000000f) - -#define SD_SCR_VERSION_1_0 0 - -/* - * CSR - Card Status Register - * Width: 32 bits - * Readback: CMD13_SEND_STATUS/R1 - */ -typedef SD_R32 SD_CSR; - -/* Bit field defines of CSR */ -#define SD_CSR_AKE_SEQ_ERROR 0x00000008 /* error in the sequence of authentication */ -#define SD_CSR_APP_CMD 0x00000020 /* card expects ACMD or the command has been interpreted as ACMD */ -#define SD_CSR_READY_FOR_DATA 0x00000100 /* buffer empty signaling on the bus */ -#define SD_CSR_CURRENT_STATE_MASK 0x00001e00 /* the state of the card when receiving the command */ -#define SD_CSR_CURRENT_STATE_SHIFT 9 -#define SD_CSR_ERASE_RESET 0x00002000 /* a erase sequence was cleared before execution due to out of erase sequence commands */ -#define SD_CSR_CARD_ECC_DISABLE 0x00004000 /* command was executed without using internal ECC */ -#define SD_CSR_WP_ERASE_SKIP 0x00008000 /* attempt to partial erase of write protected blocks */ -#define SD_CSR_CSD_OVERWRITE 0x00010000 /* attempt to 1) CSD ro fields mismatch, 2) reverse copy or perm wp bits */ -#define SD_CSR_ERROR 0x00080000 /* general error */ -#define SD_CSR_CC_ERROR 0x00100000 /* internal card controller error */ -#define SD_CSR_CARD_ECC_FAILED 0x00200000 /* card internal ECC was applied but failed to correct the data */ -#define SD_CSR_ILLEGAL_COMMAND 0x00400000 /* command illegal for the card state */ -#define SD_CSR_COM_CRC_ERROR 0x00800000 /* command crc check failed */ -#define SD_CSR_LOCK_UNLOCK_FAILED 0x01000000 /* password error in lock/unlock command */ -#define SD_CSR_CARD_IS_LOCKED 0x02000000 /* card is locked by the host */ -#define SD_CSR_WP_VIOLATION 0x04000000 /* attempts to write a protected block */ -#define SD_CSR_ERASE_PARAM 0x08000000 /* invlaid selection of write blocks for erase */ -#define SD_CSR_ERASE_SEQ_ERROR 0x10000000 /* error in erase command sequence */ -#define SD_CSR_BLOCK_LEN_ERROR 0x20000000 /* transferred block length is not allowed or transferred bytes mismatch the block length */ -#define SD_CSR_ADDRESS_ERROR 0x40000000 /* misaligned address which did not match the block length */ -#define SD_CSR_OUT_OF_RANGE 0x80000000 /* command argument was out of allowed range */ - -/* Error in the sequence of the authentication process */ -#define SD_CSR_GET_AKE_SEQ_ERROR(csr) (((uint32_t)((csr).r[0]) >> 3) & 0x00000001) -#define SD_CSR_GET_AKE_SEQ_ERROR_FROM_R(r) (((uint32_t)(r) >> 3) & 0x00000001) - -/* Card is now expect ACMD, or the command has been interpreted as ACMD */ -#define SD_CSR_GET_APP_CMD(csr) (((uint32_t)((csr).r[0]) >> 5) & 0x00000001) -#define SD_CSR_GET_APP_CMD_FROM_R(r) (((uint32_t)(r) >> 5) & 0x00000001) - -/* Corresponds to buffer empty signaling on the bus */ -#define SD_CSR_GET_READY_FOR_DATA(csr) (((uint32_t)((csr).r[0]) >> 8) & 0x00000001) -#define SD_CSR_GET_READY_FOR_DATA_FROM_R(r) (((uint32_t)(r) >> 8) & 0x00000001) - -/* - * The state of the card when receiving the the command - * (visible in the response of the next command) - */ -#define SD_CSR_GET_CURRENT_STATE(csr) (((uint32_t)((csr).r[0]) >> 9) & 0x0000000f) -#define SD_CSR_GET_CURRENT_STATE_FROM_R(r) (((uint32_t)(r) >> 9) & 0x0000000f) - -#define SD_STATE_IDLE 0 -#define SD_STATE_READY 1 -#define SD_STATE_IDENT 2 -#define SD_STATE_STBY 3 -#define SD_STATE_TRAN 4 -#define SD_STATE_DATA 5 -#define SD_STATE_RCV 6 -#define SD_STATE_PRG 7 -#define SD_STATE_DIS 8 - -/* An erase sequence was cleared due to out of erase sequence command */ -#define SD_CSR_GET_ERASE_RESET(csr) (((uint32_t)((csr).r[0]) >> 13) & 0x00000001) -#define SD_CSR_GET_ERASE_RESET_FROM_R(r) (((uint32_t)(r) >> 13) & 0x00000001) - -/* The command has been executed without using internal ECC */ -#define SD_CSR_GET_CARD_ECC_DISABLED(csr) (((uint32_t)((csr).r[0]) >> 14) & 0x00000001) -#define SD_CSR_GET_CARD_ECC_DISABLED_FROM_R(r) (((uint32_t)(r) >> 14) & 0x00000001) - -/* Set only when partial address erase was erased due to write protected (tmp/perm) blocks */ -#define SD_CSR_GET_WP_ERASE_SKIP(csr) (((uint32_t)((csr).r[0]) >> 15) & 0x00000001) -#define SD_CSR_GET_WP_ERASE_SKIP_FROM_R(r) (((uint32_t)(r) >> 15) & 0x00000001) - -/* Set when 1) read-only section of the CSD mismatch, 2) attempt to reverse copy or permanent WP bits */ -#define SD_CSR_GET_CSD_OVERWRITE(csr) (((uint32_t)((csr).r[0]) >> 16) & 0x00000001) -#define SD_CSR_GET_CSD_OVERWRITE_FROM_R(r) (((uint32_t)(r) >> 16) & 0x00000001) - -/* General error or unknown error */ -#define SD_CSR_GET_ERROR(csr) (((uint32_t)((csr).r[0]) >> 19) & 0x00000001) -#define SD_CSR_GET_ERROR_FROM_R(r) (((uint32_t)(r) >> 19) & 0x00000001) - -/* Internal card controller error */ -#define SD_CSR_GET_CC_ERROR(csr) (((uint32_t)((csr).r[0]) >> 20) & 0x00000001) -#define SD_CSR_GET_CC_ERROR_FROM_R(r) (((uint32_t)(r) >> 20) & 0x00000001) - -/* Card internal ECC was applied but failed to correct the data */ -#define SD_CSR_GET_CARD_ECC_FAILED(csr) (((uint32_t)((csr).r[0]) >> 21) & 0x00000001) -#define SD_CSR_GET_CARD_ECC_FAILED_FROM_R(r) (((uint32_t)(r) >> 21) & 0x00000001) - -/* Command not legalfor the card state */ -#define SD_CSR_GET_ILLEGAL_COMMAND(csr) (((uint32_t)((csr).r[0]) >> 22) & 0x00000001) -#define SD_CSR_GET_ILLEGAL_COMMAND_FROM_R(r) (((uint32_t)(r) >> 22) & 0x00000001) - -/* The CRC check of previous command failed */ -#define SD_CSR_GET_COM_CRC_ERROR(csr) (((uint32_t)((csr).r[0]) >> 23) & 0x00000001) -#define SD_CSR_GET_COM_CRC_ERROR_FROM_R(r) (((uint32_t)(r) >> 23) & 0x00000001) - -/* Set when a sequece or password error has been detected in lock/unlock card command */ -#define SD_CSR_GET_LOCK_UNLOCK_FAILED(csr) (((uint32_t)((csr).r[0]) >> 24) & 0x00000001) -#define SD_CSR_GET_LOCK_UNLOCK_FAILED_FROM_R(r) (((uint32_t)(r) >> 24) & 0x00000001) - -/* Signals that the card is locked by the host */ -#define SD_CSR_GET_CARD_IS_LOCKED(csr) (((uint32_t)((csr).r[0]) >> 25) & 0x00000001) -#define SD_CSR_GET_CARD_IS_LOCKED_FROM_R(r) (((uint32_t)(r) >> 25) & 0x00000001) - -/* Set when the host attempts to write protected block or tmp/perm protected card */ -#define SD_CSR_GET_WP_VIOLATION(csr) (((uint32_t)((csr).r[0]) >> 26) & 0x00000001) -#define SD_CSR_GET_WP_VIOLATION_FROM_R(r) (((uint32_t)(r) >> 26) & 0x00000001) - -/* An invalid selection of write-blocks for erase occured */ -#define SD_CSR_GET_ERASE_PARAM(csr) (((uint32_t)((csr).r[0]) >> 27) & 0x00000001) -#define SD_CSR_GET_ERASE_PARAM_FROM_R(r) (((uint32_t)(r) >> 27) & 0x00000001) - -/* An error in the sequence of erase commands occured */ -#define SD_CSR_GET_ERASE_SEQ_ERROR(csr) (((uint32_t)((csr).r[0]) >> 28) & 0x00000001) -#define SD_CSR_GET_ERASE_SEQ_ERROR_FROM_R(r) (((uint32_t)(r) >> 28) & 0x00000001) - -/* Transferred block length is not allowed or transferred length does not match block length */ -#define SD_CSR_GET_BLOCK_LEN_ERROR(csr) (((uint32_t)((csr).r[0]) >> 29) & 0x00000001) -#define SD_CSR_GET_BLOCK_LEN_ERROR_FROM_R(r) (((uint32_t)(r) >> 29) & 0x00000001) - -/* Misaligned address which did not match the block length was used in the command */ -#define SD_CSR_GET_ADDRESS_ERROR(csr) (((uint32_t)((csr).r[0]) >> 30) & 0x00000001) -#define SD_CSR_GET_ADDRESS_ERROR_FROM_R(r) (((uint32_t)(r) >> 30) & 0x00000001) - -/* Command argument out of range or this card */ -#define SD_CSR_GET_OUT_OF_RANGE(csr) (((uint32_t)((csr).r[0]) >> 31) & 0x00000001) -#define SD_CSR_GET_OUT_OF_RANGE_FROM_R(r) (((uint32_t)(r) >> 31) & 0x00000001) - -/* Check all data error bits at once */ -#define SD_CSR_CHECK_ERROR_BITS(csr) ((uint32_t)((csr).r[0]) & (SD_CSR_AKE_SEQ_ERROR | SD_CSR_ERASE_RESET | \ - SD_CSR_WP_ERASE_SKIP | SD_CSR_CSD_OVERWRITE | \ - SD_CSR_ERROR | SD_CSR_CC_ERROR | SD_CSR_CARD_ECC_FAILED | \ - /*SD_CSR_ILLEGAL_COMMAND |*/ SD_CSR_COM_CRC_ERROR | SD_CSR_LOCK_UNLOCK_FAILED | \ - SD_CSR_CARD_IS_LOCKED | SD_CSR_WP_VIOLATION | SD_CSR_ERASE_PARAM | \ - SD_CSR_ERASE_SEQ_ERROR | SD_CSR_BLOCK_LEN_ERROR | SD_CSR_ADDRESS_ERROR | \ - SD_CSR_OUT_OF_RANGE)) -/* - * SSR - SD Status Register - * Width: 512 bits - * Readback: ACMD13_SD_STATUS/DAT0 - */ -#if 0 -typedef struct _SD_SSR { - /* - * Note: The bitfields definition was not applied due to that the - * core architecture may be switched between big-endian - * and little endian. We don't want to define two structures - * to switch between the two endain architectures. Users - * could use following macros to extract the target member. - */ - union { - uint32_t r[16]; - uint8_t b[64]; - }; -} SD_SSR; -#endif - -/* Fixed offset value added to erase time */ -#define SD_SSR_GET_ERASE_OFFSET(ssr) (((uint32_t)((csr).b[50]) >> 0) & 0x00000003) - -/* Timeout value for erasing areas specified by UINT_OF_ERASE_AU */ -#define SD_SSR_GET_ERASE_TIMEOUT(ssr) (((uint32_t)((csr).b[50]) >> 2) & 0x0000003f) - -/* Number of AUs to be erased at a time */ -#define SD_SSR_GET_ERASE_SIZE(ssr) (((uint32_t)((csr).b[52]) << 8) | (uint32_t)((csr).b[51])) - -/* Size of AU */ -#define SD_SSR_GET_AU_SIZE(ssr) ((uint32_t)((csr).b[53]) >> 4) - -#define SD_AU_SIZE_NONE 0x00 -#define SD_AU_SIZE_16KB 0x01 -#define SD_AU_SIZE_32KB 0x02 -#define SD_AU_SIZE_64KB 0x03 -#define SD_AU_SIZE_128KB 0x04 -#define SD_AU_SIZE_256KB 0x05 -#define SD_AU_SIZE_512KB 0x06 -#define SD_AU_SIZE_1MB 0x07 -#define SD_AU_SIZE_2MB 0x08 -#define SD_AU_SIZE_4MB 0x09 - -/* Performance of move indicated by 1 MB/s step */ -#define SD_SSR_GET_PERFORMANCE_MOVE(ssr) ((uint32_t)((csr).b[54])) - -/* Speed class of the card */ -#define SD_SSR_GET_SPEED_CLASS(ssr) ((uint32_t)((csr).b[55])) - -#define SD_SPEED_CLASS_0 0x00 -#define SD_SPEED_CLASS_2 0x01 -#define SD_SPEED_CLASS_4 0x02 -#define SD_SPEED_CLASS_6 0x03 - -/* Size of protected area */ -#define SD_SSR_GET_SIZE_OF_PROTECTED_AREA(ssr) ((uint32_t)((csr).r[14])) - -/* SD memory card type */ -#define SD_SSR_GET_SD_CARD_TYPE(ssr) (((uint32_t)((csr).r[15]) >> 0) & 0x0000ffff) - -#define SD_CARD_TYPE_REGULAR 0x0000 -#define SD_CARD_TYPE_ROM 0x0001 - -/* Card in secured mode operation */ -#define SD_SSR_GET_SECURED_MODE(ssr) (((uint32_t)((csr).b[63]) >> 5) & 0x00000001) - -/* Shows the current defined data bus width defined by ACMD6_SET_BUS_WIDTH */ -#define SD_SSR_GET_DAT_BUS_WIDTH(ssr) (((uint32_t)((csr).b[63]) >> 6) & 0x00000003) - -/***************************************************************************** - * Secure Digital Memory Card Command Definitions - * - ****************************************************************************/ - -/* - * Class 0 - Basic Commands - * Responses: - * R1-R3, R6 - * Registers: - * CID, CSD, DSR - */ -#define SD_CMD0_GO_IDLE_STATE 0 /* Resets all cards to idle state */ -#define SD_CMD2_ALL_SEND_CID 2 /* Ask any card to send the CID numbers */ -#define SD_CMD3_SEND_RELATIVE_ADDR 3 /* Ask the card to publish a new relative address */ -#define SD_CMD4_SET_DSR 4 /* Programs the DSR of of all cards */ -#define SD_CMD7_SELECT_DESELECT_CARD 7 /* Selected (its own relative address), deselected (other address) */ - -#define SD_CMD8_SEND_IF_COND 8 /* Sends SD Memory Card interface condition */ -#define SD_CMD8_MAKE_ARG(vhs, ptn) ((((uint32_t)(vhs) & 0x0f) << 8) | ((uint32_t)(ptn) & 0xff)) -#define SD_VHS_2_7V_3_6V 0x01 -#define SD_VHS_LOW_VOLTAGE 0x02 -#define SD_CMD8_DEFAULT_PTN 0xaa /* spec 20 suggested test pattern */ - -#define SD_CMD9_SEND_CSD 9 /* Addressed card sends its card-specific data (CSD) on the cmd line */ -#define SD_CMD10_SEND_CID 10 /* Addressed card send its card-identification (CID) on the cmd line */ -#define SD_CMD12_STOP_TRANSMISSION 12 /* Forces the card to stop transmission */ -#define SD_CMD13_SEND_STATUS 13 /* Addressed card sends its status register */ -#define SD_CMD15_GO_INACTIVE_STATE 15 /* Sends an addressed card into the inactive state */ - -/* - * Class 2 - Block-Oriented Read Commands - * Responses: - * R1 - */ -#define SD_CMD16_SET_BLOCKLEN 16 /* Sets the block length for all following block commands (std cap.: read/write/lock, high cap.: lock) */ -#define SD_CMD17_READ_SINGLE_BLOCK 17 /* Reads a block of size (std: SET_BLOCKLEN, high: 512) */ -#define SD_CMD18_READ_MULTIPLE_BLOCK 18 /* Continuously transfers data from card to host until interrupted by a STOP_TRANSMISSION command */ - -/* - * Class 4 - Block-Oriented Write Commands - * Responses: - * R1 - * Registers: - * CSD - */ -#define SD_CMD24_WRITE_BLOCK 24 /* Writes a block of the size (srd: SET_BLOCKLEN, high: 512) */ -#define SD_CMD25_WRITE_MULTIPLE_BLOCK 25 /* Continuously writes block of data until interrupted by a STOP_TRANSMISSION command */ -#define SD_CMD27_PROGRAM_CSD 27 /* Programming of the programmable bits of the CSD */ - -/* - * Class 6 - Block-Oriented Write Protection Commands - * Responses: - * R1 - */ -#define SD_CMD28_SET_WRITE_PROT 28 /* Std: Sets the write protection bit of the addressed group, high: not supported */ -#define SD_CMD29_CLR_WRITE_PROT 29 /* Std: clears the write protection bit of the addressed group, high: not supported */ -#define SD_CMD30_SEND_WRITE_PROT 30 /* Std: ask the card to send the status of the write protection bits, high: not supported */ - -/* - * Class 5 - Erase Commands - * Responses: - * R1 - */ -#define SD_CMD32_ERASE_WR_BLK_START 32 /* Sets the address of the first write block to be erased */ -#define SD_CMD33_ERASE_WR_BLK_END 33 /* Sets the address of the last write block of the continuous range to be erased */ -#define SD_CMD38_ERASE 38 /* Erase all previously selected write blocks */ - -/* - * Class 7 - Lock Card Commands - * Responses: - * R1 - */ -#define SD_CMD42_LOCK_UNLOCK 42 /* To set/reset the password or lock/unlock the card (SET_BLOCKLEN) */ - -/* - * Class 8 - Application Specific Commands - * Responses: - * R1 - * Registers: - * SCR - */ -#define SD_CMD55_APP_CMD 55 /* Indicates to the card that the next command is an application specific command */ -#define SD_CMD56_GEN_CMD 56 /* Used to transfer/get a data block to/from the card for general purpose/application specific commands (SET_BLOCKLEN) */ - -#define SD_ACMD6_SET_BUS_WIDTH 6 /* Defines the data bus width to be used for data thransfer (allowed: SCR) */ -#define SD_BUS_WIDTH_ARG_1BIT 0 -#define SD_BUS_WIDTH_ARG_4BIT 2 -#define SD_ACMD6_MAKE_ARG(bw) ((uint32_t)(bw) & 0x00000003) - -#define SD_ACMD13_SD_STATUS 13 /* Send the SD status (table 4-37) */ -#define SD_ACMD22_SEND_NUM_WR_BLOCKS 22 /* Send the number of the written write blocks */ -#define SD_ACMD23_SET_WR_BLK_ERASE_COUNT 23 /* Set the number of write blocks to be preerased before writing */ - -#define SD_ACMD41_SD_SEND_OP_COND 41 /* Sends host capacity support information (HCS) and asks operating condition register (OCR) */ -#define SD_ACMD41_MAKE_ARG(hcs) ((((uint32_t)(hcs) << SD_OCR_CCS_SHIFT) & SD_OCR_CCS_MASK) | SD_OCR_VDD_2_7V_3_6V) -#define SD_HCS_SD 0 /* (Host Capacity Support) Denotes not supporting SDHC */ -#define SD_HCS_SDHC 1 /* (Host Capacity Support) Denotes SDHC support */ - -#define SD_ACMD42_SET_CLR_CARD_DETECT 42 /* Connect/Disconnect the 50KOhm pull-up resister on CD/DAT3 of the card */ -#define SD_ACMD51_SEND_SCR 51 /* Reads the SD configuration register (SCR) */ - -/* - * Class 10 - Application Specific Commands - * Responses: - * R1 - */ -#define SD_CMD6_SWITCH_FUNC 6 /* Checks switchable function (mode 0) and switch card function (mode 1) */ - -/***************************************************************************** - * SD Internal Programming Interfaces - * - ****************************************************************************/ - -/* PIO SD command retry counts */ -#define SD_CMD_MAX_RETRY_COUNT 0x10000 -#define SD_ACMD41_MAX_RETRY_COUNT 0x100 -#define SD_READ_MAX_RETRY_COUNT 0x1000 -#define SD_WRITE_MAX_RETRY_COUNT 0x2000 -#define SD_STATE_MAX_RETRY_COUNT 0x1000 -#define SD_TRANSFER_MAX_RETRY_COUNT 0x1000 - -/* SD command predefined to be sent to the SDC */ -/* Class 0 - Basic Commands */ -#define SDC_CMD0_GO_IDLE_STATE \ - ((SD_CMD0_GO_IDLE_STATE & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK) -#define SDC_CMD2_ALL_SEND_CID \ - ((SD_CMD2_ALL_SEND_CID & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_LONG_RSP_MASK) -#define SDC_CMD3_SEND_RELATIVE_ADDR \ - ((SD_CMD3_SEND_RELATIVE_ADDR & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD4_SET_DSR \ - ((SD_CMD4_SET_DSR & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK) -#define SDC_CMD7_SELECT_DESELECT_CARD \ - ((SD_CMD7_SELECT_DESELECT_CARD & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD8_SEND_IF_COND \ - ((SD_CMD8_SEND_IF_COND & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD9_SEND_CSD \ - ((SD_CMD9_SEND_CSD & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_LONG_RSP_MASK) -#define SDC_CMD10_SEND_CID \ - ((SD_CMD10_SEND_CID & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_LONG_RSP_MASK) -#define SDC_CMD12_STOP_TRANSMISSION \ - ((SD_CMD12_STOP_TRANSMISSION & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD13_SEND_STATUS \ - ((SD_CMD13_SEND_STATUS & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD15_GO_INACTIVE_STATE \ - ((SD_CMD15_GO_INACTIVE_STATE & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK) -/* Class 2 - Block-Oriented Read Commands */ -#define SDC_CMD16_SET_BLOCKLEN \ - ((SD_CMD16_SET_BLOCKLEN & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD17_READ_SINGLE_BLOCK \ - ((SD_CMD17_READ_SINGLE_BLOCK & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD18_READ_MULTIPLE_BLOCK \ - ((SD_CMD18_READ_MULTIPLE_BLOCK & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -/* Class 4 - Block-Oriented Write Commands */ -#define SDC_CMD24_WRITE_BLOCK \ - ((SD_CMD24_WRITE_BLOCK & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD25_WRITE_MULTIPLE_BLOCK \ - ((SD_CMD25_WRITE_MULTIPLE_BLOCK & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD27_PROGRAM_CSD \ - ((SD_CMD27_PROGRAM_CSD & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -/* Class 6 - Block-Oriented Write Protection Commands */ -#define SDC_CMD28_SET_WRITE_PROT \ - ((SD_CMD28_SET_WRITE_PROT & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD29_CLR_WRITE_PROT \ - ((SD_CMD29_CLR_WRITE_PROT & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD30_SEND_WRITE_PROT \ - ((SD_CMD30_SEND_WRITE_PROT & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -/* Class 5 - Erase Commands */ -#define SDC_CMD32_ERASE_WR_BLK_START \ - ((SD_CMD32_ERASE_WR_BLK_START & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD33_ERASE_WR_BLK_END \ - ((SD_CMD33_ERASE_WR_BLK_END & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD38_ERASE \ - ((SD_CMD38_ERASE & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -/* Class 7 - Lock Card Commands */ -#define SDC_CMD42_LOCK_UNLOCK \ - ((SD_CMD42_LOCK_UNLOCK & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -/* Class 8 - Application Specific Commands */ -#define SDC_CMD55_APP_CMD \ - ((SD_CMD55_APP_CMD & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_CMD56_GEN_CMD \ - ((SD_CMD56_GEN_CMD & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) -#define SDC_ACMD6_SET_BUS_WIDTH \ - ((SD_ACMD6_SET_BUS_WIDTH & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD13_SD_STATUS \ - ((SD_ACMD13_SD_STATUS & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD22_SEND_NUM_WR_BLOCKS \ - ((SD_ACMD22_SEND_NUM_WR_BLOCKS & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD23_SET_WR_BLK_ERASE_COUNT \ - ((SD_ACMD23_SET_WR_BLK_ERASE_COUNT & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD41_SD_SEND_OP_COND \ - ((SD_ACMD41_SD_SEND_OP_COND & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD42_SET_CLR_CARD_DETECT \ - ((SD_ACMD42_SET_CLR_CARD_DETECT & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -#define SDC_ACMD51_SEND_SCR \ - ((SD_ACMD51_SEND_SCR & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK | SDC_APP_CMD_MASK) -/* Class 10 - Application Specific Commands */ -#define SDC_CMD6_SWITCH_FUNC \ - ((SD_CMD6_SWITCH_FUNC & SDC_CMD_IDX_MASK) | SDC_CMD_EN_MASK | SDC_NEED_RSP_MASK) - -/* SD command interfaces */ -#if (SDD_SMALL_SD_FOOTPRINT == 0) -extern uint32_t _sd_cmd0(void); -extern uint32_t _sd_cmd4(uint32_t dsr); -extern uint32_t _sd_cmd10(uint32_t rca, SD_CID * cid); -extern uint32_t _sd_cmd15(uint32_t rca); -extern uint32_t _sd_cmd17(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd24(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd27(SD_R32 * csr); -extern uint32_t _sd_cmd28(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd29(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd30(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd32(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd33(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd38(SD_R32 * csr); -extern uint32_t _sd_cmd42(SD_R32 * csr); -extern uint32_t _sd_cmd56(uint32_t rdwr, SD_R32 * csr); -extern uint32_t _sd_acmd22(SD_R32 * csr); -extern uint32_t _sd_acmd23(uint32_t blocks, SD_R32 * csr); -extern uint32_t _sd_acmd42(uint32_t conn, SD_R32 * csr); -extern uint32_t _sd_cmd6(uint32_t mode, SD_R32 * csr); -#endif /* (SDD_SMALL_SD_FOOTPRINT == 0) */ - -extern uint32_t _sd_cmd2(SD_CID * cid); -extern uint32_t _sd_cmd3(SD_R32 * rca); -extern uint32_t _sd_cmd7(uint32_t rca, SD_R32 * csr); -extern uint32_t _sd_cmd8(uint32_t vhs_arg, SD_R32 * vhs_rsp); -extern uint32_t _sd_cmd9(uint32_t rca, SD_CSD * csd); -extern uint32_t _sd_cmd12(SD_R32 * csr); -extern uint32_t _sd_cmd13(uint32_t rca, SD_R32 * csr); -extern uint32_t _sd_cmd16(uint32_t blk_len, SD_R32 * csr); -extern uint32_t _sd_cmd18(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd25(uint32_t addr, SD_R32 * csr); -extern uint32_t _sd_cmd55(uint32_t rca, SD_R32 * csr); -extern uint32_t _sd_acmd6(uint32_t bw, SD_R32 * csr); -extern uint32_t _sd_acmd13(SD_R32 * csr); -extern uint32_t _sd_acmd41(uint32_t hcs, SD_OCR * ocr); -extern uint32_t _sd_acmd51(SD_R32 * csr); - -/* Data transfer mode state transition routines */ -// extern uint32_t _sd_wait_sending_state(uint32_t rca); -// extern uint32_t _sd_wait_receiving_state(uint32_t rca); -extern uint32_t _sd_wait_programmed(uint32_t rca); -extern uint32_t _sd_wait_transferred(uint32_t rca); -extern uint32_t _sd_disconnect(uint32_t rca); -extern uint32_t _sd_connect(uint32_t rca); -extern uint32_t _sd_deselect_card(uint32_t rca); -extern uint32_t _sd_select_card(uint32_t rca); -extern uint32_t _sd_stop_transmission(uint32_t rca); - -#endif /* __SDD_SD_H__ */ diff --git a/bsp/AE210P/driver/ssp/Kbuild b/bsp/AE210P/driver/ssp/Kbuild deleted file mode 100644 index 5378bb0075..0000000000 --- a/bsp/AE210P/driver/ssp/Kbuild +++ /dev/null @@ -1 +0,0 @@ -lib-${CONFIG_FTSSP010} := sspd_ac97.o sspd_rts.o diff --git a/bsp/AE210P/driver/ssp/sspd_ac97.c b/bsp/AE210P/driver/ssp/sspd_ac97.c deleted file mode 100644 index 1425d23401..0000000000 --- a/bsp/AE210P/driver/ssp/sspd_ac97.c +++ /dev/null @@ -1,300 +0,0 @@ -#include "hal.h" -#include "dma/dmad.h" - -#include "sspd_ac97.h" - -/* SSP FIFO properties */ -#define SSPD_HW_TXFIFO_DEPTH 16 /* TX FIFO size, units of 32bit (todo: HW readback?) */ -#define SSPD_HW_RXFIFO_DEPTH 16 /* RX FIFO size, units of 32bit (todo: HW readback?) */ - -/***************************************************************************** - * Data size for each each DMA request - * - * Adjust hint: - * - * AC97DMA_REQ_FRAMES sampling_rate effective data_size(2ch) data_size(6ch) - * ------------------------------------------------------------------------------ - * 4096 48k (ac97-fix) 85.33 ms 32768 bytes 98304 bytes - * 8192 48k (ac97-fix) 170.66 ms 65536 bytes 196608 bytes - * 10240 48k (ac97-fix) 213.33 ms 81920 bytes 245760 bytes - * 12288 48k (ac97-fix) 256.00 ms 98304 bytes 294912 bytes - * 20480 48k (ac97-fix) 426.66 ms 163840 bytes 491520 bytes - ****************************************************************************/ -#define AC97DMA_REQ_FRAMES (20480) /* number of frames */ - -#define AC97_RESET_WAIT (0x600000) /* polling loop counter for waiting hw-reset */ - -enum SSPD_AC97_RESET { - - SSPD_AC97_COLDRESET, /* All AC97 logic is initialized to its default state */ - SSPD_AC97_WARMRESET, /* Contents of AC97 registers are left unaltered */ - SSPD_AC97_REGRESET, /* Only Initialize the AC97 registers to their default states */ -}; - -void sspd_ac97_sdata_out(uint32_t *txb, int cnt) -{ - while (cnt > 0) { - - uint32_t tfve; - - /* Check room in TX FIFO */ - tfve = MASK32(I2SAC97_SR, SSPC_SR_TFVE_MASK) >> SSPC_SR_TFVE_SHIFT; - - /* Burst send to TX FIFO */ - while (tfve++ < SSPD_HW_TXFIFO_DEPTH) { - - /* Send one 32-bit word to TX FIFO */ - OUT32(I2SAC97_DR, *txb++); - - if (--cnt == 0) - break; - } - } -} - -void sspd_ac97_cmd_out(int regidx, uint32_t data) -{ - uint32_t txb[16]; - - /* Prepare AC97 write register address (slot1) and data (slot2) */ - AC97_MAKE_WCMD(txb, regidx, data); - - /* Clear SSP FIFO garbage */ - SETR32(I2SAC97_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); - - /* Set frame-tag slot-valid bits */ - OUT32(I2SAC97_ACLINK, SSPC_AC97_WCMD_SLOTS_MASK | SSPC_AC97_MAKE_CODECID(0)); - - /* Feed data to TX FIFO -- AC97 CR-write contains 2 slots */ - - /* - * [??] According to AC97 2.1 spec, stuff bits with 0 has to be at their - * position during the slot's active time. SSP will smart enough to - * identify giving valid slots and auto stuffs 0s to empty slots in TX - * mode? And whot about the same question in RX mode? - */ - - sspd_ac97_sdata_out(txb, SSPC_AC97_WCMD_SLOTS); - - /* Enable SSP TX data out */ - SETR32(I2SAC97_CR2, SSPC_C2_TXDOE_MASK | SSPC_C2_SSPEN_MASK); - - while (MASK32(I2SAC97_SR, SSPC_SR_TFVE_MASK)) - ; - - /* Disable SSP TX data out */ - CLRR32(I2SAC97_CR2, SSPC_C2_TXDOE_MASK | SSPC_C2_SSPEN_MASK); -} - -void sspd_ac97_reset(enum SSPD_AC97_RESET rest_type) -{ - uint32_t core_intl; - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Disable SSP interrupts */ - CLRR32(I2SAC97_INTCR, SSPC_INTCR_RFORIEN_MASK | SSPC_INTCR_TFURIEN_MASK | - SSPC_INTCR_RFTHIEN_MASK | SSPC_INTCR_TFTHIEN_MASK | - SSPC_INTCR_RFDMAEN_MASK | SSPC_INTCR_TFDMAEN_MASK | - SSPC_INTCR_AC97FCEN_MASK); - - /* Disable SSP data out */ - CLRR32(I2SAC97_CR2, SSPC_C2_SSPEN_MASK | SSPC_C2_TXDOE_MASK); - - /* Disable DMA request FIFO trigger */ - CLRR32(I2SAC97_INTCR, SSPC_INTCR_TFDMAEN_MASK | SSPC_INTCR_RFDMAEN_MASK); - - /* Clear FIFO garbage */ - SETR32(I2SAC97_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); - - /* Set SSP frame format as AC97 */ - SETR32SHL(I2SAC97_CR0, SSPC_C0_FFMT_MASK, SSPC_C0_FFMT_SHIFT, SSPC_INTEL_ACLINK); - - switch (rest_type) { - - case SSPD_AC97_COLDRESET: /* All AC97 logic is initialized to its default state */ - - /* (reset time: SSPCLK * SCLK_DIV) */ - DEBUG(1, 1, "SSPD_AC97_COLDRESET\n"); - SETB32(I2SAC97_CR2, SSPC_C2_ACCRST_BIT); - - while (GETB32(I2SAC97_CR2, SSPC_C2_ACCRST_BIT)) - ; - _nds_kwait(AC97_RESET_WAIT); - - break; - case SSPD_AC97_WARMRESET: /* Contents of AC97 registers are left unaltered */ - - /* (reset time: SSPCLK * SCLK_DIV, or wait ACWRST cleared) */ - DEBUG(1, 1, "SSPD_AC97_WARMRESET\n"); - SETB32(I2SAC97_CR2, SSPC_C2_ACWRST_BIT); - - while (GETB32(I2SAC97_CR2, SSPC_C2_ACWRST_BIT)) - ; - - break; - case SSPD_AC97_REGRESET: /* Only Initialize the AC97 registers to their default states */ - - DEBUG(1, 1, "SSPD_AC97_REGRESET\n"); - - /* Write AC97 reset register to do codec register reset */ - sspd_ac97_cmd_out(AC97_CRIDX_RESET, 0); - _nds_kwait(AC97_RESET_WAIT); - - break; - default: - DEBUG(1, 1, "Invalid reset method!\n"); - } - - hal_global_int_ctl(core_intl); -} - -void sspd_ac97_init(void) -{ - uint32_t core_intl; - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* - * Change AC97 codec & SSP clock source - * - * PMU_AC97PINSEL: MFPSR[3] - * 0: X_I2Ssclkout/I2SCLK - * 1: X_ac97_resetn/50MHz in AG101 - * PMU_AC97CLKSEL: MFPSR[4] - * 0: AC97CLK (Set AC97 XTL_IN source is from internal PLL. BIT_CLK is XTL_IN / 2) - * 1: GPIO22 - * PMU_SSPCLKSEL: MFPSR[6] - * 0: SSPCLK - * 1: GPIO25 - * PMU_AC97CLKOUTSEL: MFPSR[13] - * 0: GPIO - * 1: AC97CLK out - */ - - // SETR32(PMU_MFPSR, PMU_AC97PINSEL_MASK | PMU_AC97CLKSEL_MASK | PMU_SSPCLKSEL_MASK | PMU_AC97CLKOUTSEL_MASK); - // SETR32(PMU_MFPSR, PMU_AC97PINSEL_MASK | PMU_AC97CLKOUTSEL_MASK); - // SETB32(PMU_MFPSR, PMU_AC97CLKSEL_BIT); - -#if (MB_AC97_EXT_CLK) - DEBUG(1, 1, "AC97CLK: GPIO22\n"); - SETR32(PMU_MFPSR, PMU_AC97PINSEL_MASK | PMU_AC97CLKSEL_MASK | PMU_AC97CLKOUTSEL_MASK); -#else /* MB_AC97_EXT_CLK */ - DEBUG(1, 1, "AC97CLK: PLL\n"); - SETR32(PMU_MFPSR, PMU_AC97PINSEL_MASK | PMU_AC97CLKOUTSEL_MASK); - CLRB32(PMU_MFPSR, PMU_AC97CLKSEL_BIT); -#endif /* MB_AC97_EXT_CLK */ - - sspd_ac97_reset(SSPD_AC97_COLDRESET); - - /* Setup DMA FIFO trigger threshold */ - SETR32SHL(I2SAC97_INTCR, SSPC_INTCR_TFTHOD_MASK, SSPC_INTCR_TFTHOD_SHIFT, 0); - SETR32SHL(I2SAC97_INTCR, SSPC_INTCR_RFTHOD_MASK, SSPC_INTCR_RFTHOD_SHIFT, 0); - - /* SSP AC97 codec initialization */ - - /* - * Default master volume? - * Default mixer-in gain? - * Default record input selection? - */ - //sspd_ac97_cmd_out(AC97_CRIDX_MASTER_VOLUME, 0); - - hal_global_int_ctl(core_intl); -} - -void sspd_ac97_terminate(void) -{ - uint32_t core_intl; - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* Disable SSP interrupts */ - CLRR32(I2SAC97_INTCR, SSPC_INTCR_RFORIEN_MASK | SSPC_INTCR_TFURIEN_MASK | - SSPC_INTCR_RFTHIEN_MASK | SSPC_INTCR_TFTHIEN_MASK | - SSPC_INTCR_RFDMAEN_MASK | SSPC_INTCR_TFDMAEN_MASK | - SSPC_INTCR_AC97FCEN_MASK); - - /* Disable SSP data out */ - CLRR32(I2SAC97_CR2, SSPC_C2_SSPEN_MASK | SSPC_C2_TXDOE_MASK); - - /* Cold reset AC97 codec */ - SETB32(I2SAC97_CR2, SSPC_C2_ACCRST_BIT); - while (GETB32(I2SAC97_CR2, SSPC_C2_ACCRST_BIT)) - ; - - /* Clear FIFO garbage */ - SETR32(I2SAC97_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); - - hal_global_int_ctl(core_intl); -} - -void ac97_init(void) -{ - sspd_ac97_init(); - - sspd_ac97_cmd_out(AC97_CRIDX_RESET, 0); - _nds_kwait(AC97_RESET_WAIT); - - sspd_ac97_cmd_out(AC97_CRIDX_PCMOUT_GAIN, - AC97_MIXER_GAIN(AC97_MIXER_MAX, AC97_MIXER_MAX)); - - sspd_ac97_cmd_out(AC97_CRIDX_MASTER_VOLUME, - AC97_STEREO_VOLUME(AC97_VOLUME_MAX - 0x30, AC97_VOLUME_MAX - 0x30)); - - SETR32SHL(I2SAC97_INTCR, SSPC_INTCR_TFTHOD_MASK, SSPC_INTCR_TFTHOD_SHIFT, 4); - SETR32SHL(I2SAC97_INTCR, SSPC_INTCR_RFTHOD_MASK, SSPC_INTCR_RFTHOD_SHIFT, 4); - OUT32(I2SAC97_ACLINK, SSPC_AC97_PCM_SLOTS_MASK | SSPC_AC97_MAKE_CODECID(0)); - SETR32(I2SAC97_INTCR, SSPC_INTCR_TFDMAEN_MASK); - SETR32(I2SAC97_CR2, SSPC_C2_TXDOE_MASK | SSPC_C2_SSPEN_MASK); - SETR32(I2SAC97_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); -} - -volatile int g_buffered_frames; - -/* No use and marked by KCLin */ -/* -static void psp(void *data) -{ - g_buffered_frames -= *(int*)data; - free(data); - -} -*/ - -static void rcp(void *data) -{ - g_buffered_frames -= *(int*)data; - free(data); -} -extern int ring_idx; -void ac97_play(int frames, uint32_t *pcm_data, void *ac97_data) -{ - DMAD_CHANNEL_REQUEST_DESC *ch_req = ac97_data; - - while (frames > 0){ - - int f; - int *data; - DMAD_DRB *drb; - - f = (frames < AC97DMA_REQ_FRAMES) ? frames : AC97DMA_REQ_FRAMES; - data = malloc(sizeof(int)); - KASSERT(data); - *data = f; - - _dmad_alloc_drb(ch_req, &drb); - - drb->src_addr = pcm_data; - drb->dst_addr = (void *)I2SAC97_DR; - drb->req_size = (f << 1); /* units of data width (32bit for AC97) */ - drb->rcp = rcp; - drb->data = data; - - pcm_data += (f << 1); - g_buffered_frames += f; -// DEBUG(1, 1, "FRAME: %d,%d\n", g_buffered_frames,ring_idx); - _dmad_submit_request(ch_req, drb); - frames -= f; - } -} diff --git a/bsp/AE210P/driver/ssp/sspd_ac97.h b/bsp/AE210P/driver/ssp/sspd_ac97.h deleted file mode 100644 index dfeeeab70d..0000000000 --- a/bsp/AE210P/driver/ssp/sspd_ac97.h +++ /dev/null @@ -1,444 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Aug.21.2007 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sspd_ac97.c - * - * DESCRIPTION - * - * AC97 codec digital serial interface protocol implementation. - * A SSP AC-link & AC97 controller driver supplement. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * None - * - ****************************************************************************/ -#ifndef __SSPD_AC97_H__ -#define __SSPD_AC97_H__ - -/***************************************************************************** - * AC97 Audio Frame Definitions - * - ****************************************************************************/ - -/***************************************************************************** - * Definitions for SDATA_OUT frame slots - ****************************************************************************/ -/* Command address port (slot1) */ -#define AC97_CMDADDR_RW_MASK 0x00080000 /* AC97 read/write command */ -#define AC97_CMDADDR_RW_BIT 19 - #define AC97_CMD_WRITE 0 - #define AC97_CMD_READ 1 - -#define AC97_CMDADDR_CRIDX_MASK 0x0007f000 /* AC97 control register index (even addressed) */ -#define AC97_CMDADDR_CRIDX_SHIFT 12 - -/* Command data port (slot2) */ -#define AC97_CMDDATA_MASK 0x000ffff0 /* AC97 command data (16 bits) */ -#define AC97_CMDDATA_SHIFT 4 - -/***************************************************************************** - * Definitions for SDATA_IN frame slots - ****************************************************************************/ -/* Status address port (slot1) */ -#define AC97_STADDR_CRIDX_MASK 0x0007f000 /* Echo of AC97 control register index */ -#define AC97_STADDR_CRIDX_SHIFT 12 - -#define AC97_STADDR_SLOTREQ_MASK 0x00000ffc /* AC97 2.0 Appendex A SLOTREQ bit definitions */ -#define AC97_STADDR_SLOTREQ_SHIFT 2 - -/* Command data port (slot2) */ -#define AC97_STDATA_MASK 0x000ffff0 -#define AC97_STDATA_SHIFT 4 - -/***************************************************************************** - * Definitions for PCM sampling data - ****************************************************************************/ -/* PCM sampling resolution */ -#define AC97_PCM_SR16_MASK 0x000ffff0 /* 16-bit sampling resolution */ -#define AC97_PCM_SR16_SHIFT 4 -#define AC97_PCM_SR18_MASK 0x000ffffc /* 18-bit sampling resolution */ -#define AC97_PCM_SR18_SHIFT 2 -#define AC97_PCM_SR20_MASK 0x000fffff /* 20-bit sampling resolution */ -#define AC97_PCM_SR20_SHIFT 0 - - -/***************************************************************************** - * AC97 Control Register Definitions - ****************************************************************************/ -/* Reset register (index 0x00) */ -#define AC97_CRIDX_RESET 0x00 /* Write any value to do register rest, */ - /* read will return feature implementation id. */ -/* Reset register definitions */ -#define AC97_ID0_DEDICATED_MIC_MASK 0x0001 /* Dedicated mic PCM in channel */ -#define AC97_ID0_DEDICATED_MIC_BIT 0 -#define AC97_ID1_RESERVED_MASK 0x0002 /* Reserved (was modem line codec support) */ -#define AC97_ID1_RESERVED_BIT 1 -#define AC97_ID2_BASE_TREBLE_CTRL_MASK 0x0004 /* Bass and Treble control */ -#define AC97_ID2_BASE_TREBLE_CTRL_BIT 2 -#define AC97_ID3_SIMULATED_STEREO_MASK 0x0008 /* Simulated stereo */ -#define AC97_ID3_SIMULATED_STEREO_BIT 3 -#define AC97_ID4_HEADPHONE_OUT_MASK 0x0010 /* Headphone out support */ -#define AC97_ID4_HEADPHONE_OUT_BIT 4 -#define AC97_ID5_LAUDNESS_MASK 0x0020 /* Loudness (bass boost) support */ -#define AC97_ID5_LAUDNESS_BIT 5 -#define AC97_ID6_18BIT_DAC_MASK 0x0040 /* 18 bit DAC resolution */ -#define AC97_ID6_18BIT_DAC_BIT 6 -#define AC97_ID7_20BIT_DAC_MASK 0x0080 /* 20 bit DAC resolution */ -#define AC97_ID7_20BIT_DAC_BIT 7 -#define AC97_ID8_18BIT_ADC_MASK 0x0100 /* 18 bit ADC resolution */ -#define AC97_ID8_18BIT_ADC_BIT 8 -#define AC97_ID9_20BIT_ADC_MASK 0x0200 /* 20 bit ADC resolution */ -#define AC97_ID9_20BIT_ADC_BIT 9 - -#define AC97_SE_MASK 0x7c /* 3D Stereo Enhancement Technique */ -#define AC97_SE_SHIFT 10 - #define AC97_SE_NONE 0 - #define AC97_SE_PHAT 1 - #define AC97_SE_CREATIVE 2 - #define AC97_SE_NS3D 3 - #define AC97_SE_YMERSION 4 - #define AC97_SE_BBE3D 5 - #define AC97_SE_CRYSTAL3D 6 - #define AC97_SE_QXPANDER 7 - #define AC97_SE_SPATIALIZER3D 8 - #define AC97_SE_SRS3D 9 - #define AC97_SE_PLATFORMTECH3D 10 - #define AC97_SE_AKM3D 11 - #define AC97_SE_AUREAL 12 - #define AC97_SE_AZTECH3D 13 - #define AC97_SE_BINAURA3D 14 - #define AC97_SE_ESS 15 - #define AC97_SE_VMAX 16 - #define AC97_SE_NVIDEA3D 17 - #define AC97_SE_INCREDIBLE 18 - #define AC97_SE_TI3D 19 - #define AC97_SE_VLSI3D 20 - #define AC97_SE_TRITECH3D 21 - #define AC97_SE_REALTECH3D 22 - #define AC97_SE_SAMSUNG3D 23 - #define AC97_SE_WOLFSON3D 24 - #define AC97_SE_DELTA3D 25 - #define AC97_SE_SIGMATEL3D 26 - #define AC97_SE_ROCKWELL3D 28 - -/* Play master volume registers (index 0x02, 0x04, 0x06) */ -#define AC97_CRIDX_MASTER_VOLUME 0x02 /* Stereo master volume register (ML, MR) */ -#define AC97_CRIDX_HEADPHONE_VOLUME 0x04 /* Headphone volume register (ML, MR) */ -#define AC97_CRIDX_MASTER_VOLUME_MONO 0x06 /* Mono master volume register (MM/MR) */ - -/* Play master volume register definitions */ -#define AC97_MR_MASK 0x003f /* Right channel level (1.5dB step) */ -#define AC97_MR_SHIFT 0 -#define AC97_ML_MASK 0x3f00 /* Left channel level */ -#define AC97_ML_SHIFT 8 -#define AC97_MUTE_MASK 0x8000 /* Mute bit (able to keep original level value) */ -#define AC97_MUTE_BIT 15 - - #define AC97_VOLUME_INCSTEP (-1) /* 1.5dB increase step */ - #define AC97_VOLUME_DECSTEP (+1) /* 1.5dB decrease step */ - - #define AC97_VOLUME_0DB_ATTEN 0x00 /* 0 dB attenuation (max) (required) */ - #define AC97_VOLUME_46P5DB_ATTEN 0x1f /* 46.5dB attenuation (required) */ - #define AC97_VOLUME_94P5DB_ATTEN 0x3f /* 94.5dB attenuation (min) (optional) */ - - #define AC97_VOLUME_MAX 0x00 /* 0 dB attenuation (max) (required) */ - #define AC97_VOLUME_MIDDLE 0x1f /* 46.5dB attenuation (required) */ - #define AC97_VOLUME_MIN 0x3f /* 94.5dB attenuation (min) (optional) */ - -/* Master tone control register (index 0x08) */ -#define AC97_CRIDX_MASTER_TONE 0x08 /* Master tone (bass & treble) control register */ - -/* Master tone control register definitions */ -#define AC97_TREBLE_MASK 0x000f /* Tremble level (10kHz center, 1.5dB step) */ -#define AC97_TREBLE_SHIFT 0 -#define AC97_BASS_MASK 0x0f00 /* Base level (100Hz center, 1.5dB step) */ -#define AC97_BASS_SHIFT 8 - - #define AC97_TONE_INCSTEP (-1) /* +1.5dB increase step */ - #define AC97_TONE_DECSTEP (+1) /* -1.5dB decrease step */ - - #define AC97_TONE_MAX 0x00 /* +10.5dB gain */ - #define AC97_TONE_CENTER 0x07 /* 0 dB gain */ - #define AC97_TONE_MIN 0x0e /* -10.5dB gain */ - #define AC97_TONE_BYPASS 0x0f /* Bypass */ - -/* PC beep register (index 0x0a) */ -#define AC97_CRIDX_PCBEEP 0x0a /* PC beep input level control register */ - -/* PC beep register definitions */ -#define AC97_PCBEEP_MASK 0x001e /* Beep level (3dB step) */ -#define AC97_PCBEEP_SHIFT 1 -#define AC97_PCBEEP_MUTE_MASK 0x8000 /* Mute bit (able to keep original level value) */ -#define AC97_PCBEEP_MUTE_BIT 15 - - #define AC97_PCBEEP_INCSTEP (+1) /* 3dB increase step */ - #define AC97_PCBEEP_DECSTEP (-1) /* 3dB decrease step */ - - #define AC97_PCBEEP_0DB 0 /* 0dB */ - #define AC97_PCBEEP_45DB 15 /* 45dB */ - -/* Analog mixer input gain registers (index 0x0c ~ 0x18) */ -#define AC97_CRIDX_PHONE_GAIN 0x0c /* Phone volume input gain control register (GR, M) */ -#define AC97_CRIDX_MIC_GAIN 0x0e /* Microphone volume input gain control register (BOOST, GR, M) */ -#define AC97_CRIDX_LINEIN_GAIN 0x10 /* Line in volume input gain control register (GL, GR, M) */ -#define AC97_CRIDX_CD_GAIN 0x12 /* CD volume input gain control register (GL, GR, M) */ -#define AC97_CRIDX_VIDEO_GAIN 0x14 /* Video volume input gain control register (GL, GR, M) */ -#define AC97_CRIDX_AUX_GAIN 0x16 /* AUX volume input gain control register (GL, GR, M) */ -#define AC97_CRIDX_PCMOUT_GAIN 0x18 /* PCM out from AC97 volume input gain control register (GL, GR, M) */ - -/* - * Phone volume input gain register definitions - * Microphone volume input gain control register definitions - * Line in volume input gain control register definitions - * CD volume input gain control register definitions - * Video volume input gain control register definitions - * AUX volume input gain control register definitions - * PCM out from AC97 volume input gain control register definitions - */ -#define AC97_MIXER_GR_MASK 0x001f /* Mixer input gain right channel (1.5dB step) */ -#define AC97_MIXER_GR_SHIFT 0 -#define AC97_MIXER_GN_MASK AC97_GR_MASK -#define AC97_MIXER_GN_SHIFT AC97_GR_SHIFT -#define AC97_MIXER_GL_MASK 0x1f00 /* Mixer input gain left channel (1.5dB step) */ -#define AC97_MIXER_GL_SHIFT 0 -#define AC97_MIXER_MUTE_MASK 0x8000 /* Mute bit (able to keep original level value) */ -#define AC97_MIXER_MUTE_BIT 15 - - #define AC97_MIXER_INCSTEP (-1) /* 1.5dB increase step */ - #define AC97_MIXER_DECSTEP (+1) /* 1.5dB decrease step */ - - #define AC97_MIXER_MAX 0x00 /* +12.0dB gain */ - #define AC97_MIXER_CENTER 0x08 /* 0 dB gain */ - #define AC97_MIXER_MIN 0x1f /* -34.5dB gain */ - -/* Microphone volume input gain control register specific definitions */ -#define AC97_MIC_VOLUME_BOOST_MASK 0x0040 /* 20dB boost bit */ -#define AC97_MIC_VOLUME_BOOST_BIT 0 - -/* ------------------------------------------------ */ -/* Record select control register (index 0x1a) */ -/* */ -#define AC97_CRIDX_RECORD_SELECT 0x1a /* Record select control register */ - -/* Record select control register definitions */ -#define AC97_RECORD_SR_MASK 0x0007 /* Record select right channel */ -#define AC97_RECORD_SR_SHIFT 0 -#define AC97_RECORD_SL_MASK 0x0700 /* Record select left channel */ -#define AC97_RECORD_SL_SHIFT 8 - - #define AC97_RECORD_SELECT_MIC 0 - #define AC97_RECORD_SELECT_CD 1 - #define AC97_RECORD_SELECT_VIDEO 2 - #define AC97_RECORD_SELECT_AUX 3 - #define AC97_RECORD_SELECT_LINEIN 4 - #define AC97_RECORD_SELECT_STEREOMIX 5 - #define AC97_RECORD_SELECT_MONOMIX 6 - #define AC97_RECORD_SELECT_PHONE 7 - -/* ------------------------------------------------ */ -/* Record gain registers (index 0x1c, 0x1e) */ -/* */ -#define AC97_CRIDX_RECORD_GAIN 0x1c /* Record gain (stereo input) register (GL, GR, M) */ -#define AC97_CRIDX_RECORD_GAIN_MIC 0x1e /* Record gain mic (optional ch3 mic) register (GR, M) */ - -/* Record gain (stereo input) register definitions */ -/* Record gain mic (optional ch3 mic) register definitions */ -#define AC97_RECORD_GR_MASK 0x000f /* Record gain right channel (1.5dB step) */ -#define AC97_RECORD_GR_SHIFT 0 -#define AC97_RECORD_GL_MASK 0x0f00 /* Record gain left channel (1.5dB step) */ -#define AC97_RECORD_GL_SHIFT 8 -#define AC97_RECORD_MUTE_MASK 0x8000 /* Mute bit (able to keep original level value) */ -#define AC97_RECORD_MUTE_BIT 15 - - #define AC97_RECORD_INCSTEP (+1) /* 1.5dB increase step */ - #define AC97_RECORD_DECSTEP (-1) /* 1.5dB decrease step */ - - #define AC97_RECORD_0DB 0x00 /* 0.0dB gain */ - #define AC97_RECORD_22P5DB 0x0f /* +22.5dB gain */ - -/* ------------------------------------------------ */ -/* General purpose register (index 0x20) */ -/* */ -#define AC97_CRIDX_GPR 0x20 /* General purpose register */ - -/* General purpose register definitions */ -#define AC97_GPR_LPBK_MASK 0x0080 /* ADC/DAC loopback mode (system performance measurement) */ -#define AC97_GPR_LPBK_BIT 7 -#define AC97_GPR_MS_MASK 0x0100 /* Mic select (0: mic1, 1: mic2) */ -#define AC97_GPR_MS_BIT 8 -#define AC97_GPR_MIX_MASK 0x0200 /* Mono output select (0: mix, 1: mic) */ -#define AC97_GPR_MIX_BIT 9 -#define AC97_GPR_LD_MASK 0x1000 /* Loudness/bass_boost (0: off, 1: on) */ -#define AC97_GPR_LD_BIT 12 -#define AC97_GPR_3D_MASK 0x2000 /* 3D stereo enhancement (0: off, 1: on) */ -#define AC97_GPR_3D_BIT 13 -#define AC97_GPR_ST_MASK 0x4000 /* Simulated stereo enhancement (0: off, 1: on) */ -#define AC97_GPR_ST_BIT 14 -#define AC97_GPR_POP_MASK 0x8000 /* PCM out path & mute (0: pre 3D, 1: post 3D) */ -#define AC97_GPR_POP_BIT 15 - -/* ------------------------------------------------ */ -/* 3D control register (index 0x22) */ -/* */ -#define AC97_CRIDX_3D_CONTROL 0x22 /* 3D control register */ - -/* 3D control register definitions */ -#define AC97_3D_CONTROL_DP_MASK 0x000f /* Depth */ -#define AC97_3D_CONTROL_DP_SHIFT 0 -#define AC97_3D_CONTROL_CR_MASK 0x0f00 /* Center */ -#define AC97_3D_CONTROL_CR_SHIFT 8 - -/* ------------------------------------------------ */ -/* Powerdown control/status register (index 0x20) */ -/* */ -#define AC97_CRIDX_POWER 0x26 /* Powerdown control/status register */ - -/* Powerdown control/status register definitions */ -#define AC97_POWER_ADC_MASK 0x0001 /* ADC selction ready to transmit data */ -#define AC97_POWER_ADC_BIT 0 -#define AC97_POWER_DAC_MASK 0x0002 /* DAC selection ready to accept data */ -#define AC97_POWER_DAC_BIT 1 -#define AC97_POWER_ANL_MASK 0x0004 /* Analog mixer, etc. ready */ -#define AC97_POWER_ANL_BIT 2 -#define AC97_POWER_REF_MASK 0x0008 /* Vref's up to nominal level */ -#define AC97_POWER_REF_BIT 3 - -#define AC97_POWER_PR0_MASK 0x0100 /* PCM in ADC's & input mux powerdown */ -#define AC97_POWER_PR0_BIT 8 -#define AC97_POWER_PR1_MASK 0x0200 /* PCM out DACs powerdown */ -#define AC97_POWER_PR1_BIT 9 -#define AC97_POWER_PR2_MASK 0x0400 /* Analog mixer power down (Vref still on) */ -#define AC97_POWER_PR2_BIT 10 -#define AC97_POWER_PR3_MASK 0x0800 /* Analog mixer power down (Vref off) */ -#define AC97_POWER_PR3_BIT 11 -#define AC97_POWER_PR4_MASK 0x1000 /* Digital interface (AC-link) powerdown (external clk off) */ -#define AC97_POWER_PR4_BIT 12 -#define AC97_POWER_PR5_MASK 0x2000 /* Internal clk disable */ -#define AC97_POWER_PR5_BIT 13 -#define AC97_POWER_PR6_MASK 0x4000 /* HP amp powerdown */ -#define AC97_POWER_PR6_BIT 14 - -#define AC97_POWER_EAPD_MASK 0x8000 /* External amplifier power down */ -#define AC97_POWER_EAPD_BIT 15 - -/* ------------------------------------------------ */ -/* Vendor ID registers (index 0x20) */ -/* */ -#define AC97_CRIDX_VENDOR_ID1 0x7c /* Vendor ID register 1 */ -#define AC97_CRIDX_VENDOR_ID2 0x7e /* Vendor ID register 2 */ - -/* Vendor ID 1 register definitions */ -#define AC97_VENDOR_CHAR2_MASK 0x00ff /* Second ascii char of vendor id */ -#define AC97_VENDOR_CHAR2_SHIFT 0 -#define AC97_VENDOR_CHAR1_MASK 0xff00 /* First ascii char of vendor id */ -#define AC97_VENDOR_CHAR1_SHIFT 8 - -/* Vendor ID 2 register definitions */ -#define AC97_VENDOR_REV_MASK 0x00ff /* Vendor revision number */ -#define AC97_VENDOR_REV_SHIFT 0 -#define AC97_VENDOR_CHAR3_MASK 0xff00 /* Third ascii char of vendor id */ -#define AC97_VENDOR_CHAR3_SHIFT 8 - -/* - * Todo: - * Appendix A - AC97 2.0 Variable Sample Rate Extension - * Appendix B - AC97 2.0 Modem AFE Extension - * Appendix C - AC97 2.0 Multiple Codec Extension - */ - -/***************************************************************************** - * AC97 Driver-Supplement Helper Macros - ****************************************************************************/ - -/* Make frame slot1 value to write AC97 codec register */ -#define AC97_MAKE_WCMD_ADDR(idx) \ - (((AC97_CMD_WRITE << AC97_CMDADDR_RW_BIT) & AC97_CMDADDR_RW_MASK) | \ - (((uint32_t)(idx) << AC97_CMDADDR_CRIDX_SHIFT) & AC97_CMDADDR_CRIDX_MASK)) - -/* Make frame slot1 value to read AC97 codec register */ -#define AC97_MAKE_RCMD_ADDR(idx) \ - (((AC97_CMD_READ << AC97_CMDADDR_RW_BIT) & AC97_CMDADDR_RW_MASK) | \ - (((uint32_t)(idx) << AC97_CMDADDR_CRIDX_SHIFT) & AC97_CMDADDR_CRIDX_MASK)) - -/* Make frame slot2 value to write AC97 codec register */ -#define AC97_MAKE_CMD_DATA(data) \ - (((uint32_t)(data) << AC97_CMDDATA_SHIFT) & AC97_CMDDATA_MASK) - -/* Make frame slot1 and slot2 value to tx buffer for AC97 codec register write */ -#define AC97_MAKE_WCMD(txb, idx, data) \ - ((uint32_t *)(txb))[0] = AC97_MAKE_WCMD_ADDR(idx); \ - ((uint32_t *)(txb))[1] = AC97_MAKE_CMD_DATA(data); - -/* Make frame slot1 and slot2 value to tx buffer for AC97 codec register read */ -#define AC97_MAKE_RCMD(txb, idx, data) \ - ((uint32_t *)(txb))[0] = AC97_MAKE_RCMD_ADDR(idx); \ - /*((uint32_t *)(txb))[1] = AC97_MAKE_CMD_DATA(data); */ - -/******************************************************************************* - * Following helper functions imply non-20-bit msb-aligned sdata_out format - ******************************************************************************/ - -/* Make codec stereo volume */ -#define AC97_STEREO_VOLUME(l, r) \ - ((((uint32_t)(l) << AC97_ML_SHIFT) & AC97_ML_MASK) | \ - (((uint32_t)(r) << AC97_MR_SHIFT) & AC97_MR_MASK)) - -/* Make codec mono volume */ -#define AC97_MONO_VOLUME(m) \ - ((((uint32_t)(m) << AC97_MR_SHIFT) & AC97_MR_MASK)) - -/* Make tone (bass, treble) gain value */ -#define AC97_TONE_GAIN(b, t) \ - ((((uint32_t)(b) << AC97_BASS_SHIFT) & AC97_BASS_MASK) | \ - (((uint32_t)(t) << AC97_TREBLE_SHIFT) & AC97_TREBLE_MASK)) - -/* Make pc-beep gain value */ -#define AC97_PCBEEP_GAIN(g) \ - ((((uint32_t)(g) << AC97_MIXER_GR_SHIFT) & AC97_MIXER_GR_MASK)) - -/* Make mixer phone gain value */ -#define AC97_PHONE_GAIN(m) \ - ((((uint32_t)(m) << AC97_PCBEEP_SHIFT) & AC97_PCBEEP_MASK)) - -/* Make mixer mic gain value */ -#define AC97_MIC_GAIN(b, m) \ - ((((uint32_t)(m) << AC97_MIXER_GR_SHIFT) & AC97_MIXER_GR_MASK) | \ - (((uint32_t)(b) << AC97_MIC_VOLUME_BOOST_BIT) & AC97_MIC_VOLUME_BOOST_MASK)) - -/* Make mixer gain value */ -#define AC97_MIXER_GAIN(l, r) \ - ((((uint32_t)(l) << AC97_MIXER_GL_SHIFT) & AC97_MIXER_GL_MASK) | \ - (((uint32_t)(r) << AC97_MIXER_GR_SHIFT) & AC97_MIXER_GR_MASK)) - -/* Make record select value */ -#define AC97_RECORD_SELECT(l, r) \ - ((((uint32_t)(l) << AC97_RECORD_SL_SHIFT) & AC97_RECORD_SL_MASK) | \ - (((uint32_t)(r) << AC97_RECORD_SR_SHIFT) & AC97_RECORD_SR_MASK)) - -/* Make record gain value */ -#define AC97_RECORD_GAIN(l, r) \ - ((((uint32_t)(l) << AC97_RECORD_GL_SHIFT) & AC97_RECORD_GL_MASK) | \ - (((uint32_t)(r) << AC97_RECORD_GR_SHIFT) & AC97_RECORD_GR_MASK)) - -/* Make record mic gain value */ -#define AC97_RECORD_MIC_GAIN(m) \ - (((uint32_t)(m) << AC97_RECORD_GR_SHIFT) & AC97_RECORD_GR_MASK) - -void ac97_init(void); -#endif /* __SSPD_AC97_H__ */ diff --git a/bsp/AE210P/driver/ssp/sspd_rts.c b/bsp/AE210P/driver/ssp/sspd_rts.c deleted file mode 100644 index 50ce245f41..0000000000 --- a/bsp/AE210P/driver/ssp/sspd_rts.c +++ /dev/null @@ -1,456 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Mar.16.2008 Created. - ****************************************************************************/ - -#include "hal.h" -#include "sspd_rts.h" -#include "bsp_hal.h" - -#define RTS_PRESSED_Z1_MIN 0x10 -#define RTS_PRESSED_Z2_MAX 0xfe0 - -typedef struct _SSPD_RTS_CONTEXT{ - - hal_bh_t hisr; - - hal_semaphore_t *usr_ievent; - struct ts_data *usr_idata; - -} SSPD_RTS_CONTEXT; - -SSPD_RTS_CONTEXT rts_ctxt; - -#define SSPD_HISR_STACK_SIZE 1024 -static uint32_t sspd_rts_hisr_stack[SSPD_HISR_STACK_SIZE]; - -static void _sspd_rts_lisr(int vector){ - - int x = 0, y = 0, z1 = 0, z2 = 0, p = 0; - - DEBUG(0, 1, "Enter\n"); - - if (vector != RTS_LISR_VECTOR) - hal_system_error(HAL_ERR_UNHANDLED_INTERRUPT); - - /* Disable #PENIRQ interrupt */ - uint32_t prv_msk = hal_intc_irq_mask(RTS_LISR_VECTOR); - - /* Clear #PENIRQ interrupt status */ - hal_intc_irq_clean(RTS_LISR_VECTOR); - - /* Enable higher priority interrupt */ - GIE_ENABLE(); -//FIXME -#if 0 -#if(NO_EXTERNAL_INT_CTL==0) - /* Disable #PENIRQ interrupt temporarily */ - CLRB32(INTC_HW1_ER, RTS_LISR_VECTOR); - - /* Clear #PENIRQ interrupt status */ - SETB32(INTC_HW1_CLR, RTS_LISR_VECTOR); -#else - /* FIXME add clear ts interrupt */ -#endif -#endif - _sspd_rts_probe(&x, &y, &z1, &z2, &p); - _sspd_rts_probe(&x, &y, &z1, &z2, &p); - _sspd_rts_probe(&x, &y, &z1, &z2, &p); - - rts_ctxt.usr_idata->x = x; - rts_ctxt.usr_idata->y = y; - rts_ctxt.usr_idata->z1 = z1; - rts_ctxt.usr_idata->z2 = z2; - - DEBUG(0, 1, "%4d, %4d, %4d, %4d\n", x, y, z1, z2); - - if (z1 < 100) { - /* Disable GIE to prevent nested self */ - GIE_DISABLE(); - /* - * Clear #PENIRQ interrupt status again because _sspd_rts_probe would trigger #PENIRQ interrupt - * Please reference ADS7846 Spec. - */ - hal_intc_irq_clean(RTS_LISR_VECTOR); - - /* Re-enable touch interrupt */ - hal_intc_irq_unmask(prv_msk); - return; - - } - - hal_raise_bh(&rts_ctxt.hisr); - // TODO - // It is a walk around since interrupt priority - // we should change the hisr - hal_intc_irq_unmask(prv_msk); - hal_intc_irq_disable(RTS_LISR_VECTOR); -} - -static inline void ts_hisr(void *param){ - - hal_bh_t *bh = param; - - while (1){ - - DEBUG(0, 1, "before\n"); - hal_pend_semaphore(&bh->sem, HAL_SUSPEND); - DEBUG(0, 1, "after\n"); - hal_post_semaphore(rts_ctxt.usr_ievent); - -#ifndef CONFIG_PLAT_QEMU - hal_sleep(300); -#endif - - hal_intc_irq_clean(RTS_LISR_VECTOR); - HAL_INTC_IRQ_ATOMIC_ENABLE(RTS_LISR_VECTOR); - // SETB32(INTC_HW1_ER, RTS_LISR_VECTOR); - // SETB32(INTC_HW1_CLR, RTS_LISR_VECTOR); - } -} - -static void _sspd_rts_set_sclk(int sclk){ - - int sclk_div; /* serial clock rate divisor */ - - if (sclk > RTS_ADS7846_DCLK_MAX){ - - DEBUG(1, 1, "Warning : SCLK exceed allowable range! Truncation is performed.\n"); - sclk = RTS_ADS7846_DCLK_MAX; - } - - /* - * sclk source: - * PLL3 (SSPCLK = PLL3/6) AG101 internal clk - * GPIO25 (SSPCLK = GPIO25) AG101 external clk - * OSCCLK (SSPCLK = OSCCLK * 6 / 6) Leopard - * - * calculate sclk_div from internal PLL3 - * - * sclk_div = (SSPCLK / sclk / 2) - 1 - * = ((PLL3 / 6) / sclk / 2) - 1 - * = ((OSCCLK * 30 / 6) / sclk / 2) - 1 - */ - - /* - * setup PMU SSP clock source - * - * PMU_SSPCLKSEL: MFPSR[6] - * 0: SSPCLK - * 1: GPIO25 - * - * PMU_AC97CLKOUTSEL: MFPSR[13] - * 0: GPIO - * 1: AC97CLK out - */ - - /* [2008-03-20] SSP1 only works with internal clock source on AG101 and Leopard EVBs. */ - -#if 0 /*(MB_SSP_EXT_CLK) */ - sclk_div = (24768000 / (sclk << 1)) - 1; - SSPD_TRACE(("\nSSPCLK: GPIO25\n")); - SETB32(PMU_MFPSR, PMU_SSPCLKSEL_BIT); -#else - sclk_div = (MB_OSCCLK / (2 * sclk)) - 1; - DEBUG(1, 1, "SSPCLK: PLL\n"); - CLRB32(PMU_MFPSR, PMU_SSPCLKSEL_BIT); -#endif - - DEBUG(1, 1, "sclk : %d, sclk_div : 0x%04x\n", sclk, sclk_div); - - /* - * setup SSP SCLKDIV - * PDL : (padding data length) not used - * SDL : (serial data length) 8-1 (8 bits) - * SCLKDIV : sclk_div - */ -#ifndef CONFIG_PLAT_QEMU - OUT32(SSPC_CR1, ((7 << SSPC_C1_SDL_SHIFT) & SSPC_C1_SDL_MASK) | /* bit data length */ - ((sclk_div << SSPC_C1_SCLKDIV_SHIFT) & SSPC_C1_SCLKDIV_MASK)); /* sclkdiv */ -#else - OUT32(SSPC_CR1, ((23 << SSPC_C1_SDL_SHIFT) & SSPC_C1_SDL_MASK) | /* bit data length */ - ((sclk_div << SSPC_C1_SCLKDIV_SHIFT) & SSPC_C1_SCLKDIV_MASK)); /* sclkdiv */ -#endif -} - -int _sspd_rts_init(struct ts_dev *ts){ - - int status = HAL_SUCCESS; - int core_intl; - - core_intl = hal_global_int_ctl(HAL_DISABLE_INTERRUPTS); - - /* SSP controler initialization - SPI */ - - /* Disable all SSP interrupts, and set DMA trigger FIFO threshold to 0. */ - OUT32(SSPC_INTCR, 0); - /* check ts interrupt vector*/ - if (ts->penirq){ - status = hal_register_isr(RTS_LISR_VECTOR, _sspd_rts_lisr, (void*)0); - if (status != HAL_SUCCESS){ - - DEBUG(1, 1, "Failed to register SSPD driver LISR!\n"); - return status; - } - - rts_ctxt.usr_ievent = ts->event_obj; - rts_ctxt.usr_idata = ts->event_data; - rts_ctxt.hisr.th.fn = ts_hisr; - rts_ctxt.hisr.th.ptos = &sspd_rts_hisr_stack[SSPD_HISR_STACK_SIZE]; - rts_ctxt.hisr.th.stack_size = sizeof(sspd_rts_hisr_stack); - rts_ctxt.hisr.th.prio = CONFIG_TSD_HISR_PRIORITY; - rts_ctxt.hisr.th.name = "TS BH"; - rts_ctxt.hisr.th.arg = &rts_ctxt.hisr; - status = hal_create_bh(&rts_ctxt.hisr); - - if (status != HAL_SUCCESS){ - - DEBUG(1, 1, "Failed to create SSPD-RTS driver HISR!\n"); - return status; - } - - /* INTC */ - /* - Disable #PENIRQ interrupt */ - hal_intc_irq_disable(RTS_LISR_VECTOR); - /* - Clear #PENIRQ interrupt status */ - hal_intc_irq_clean(RTS_LISR_VECTOR); - /* - Setup #PENIRQ interrupt trigger mode - edge trigger */ - /* - Setup #PENIRQ interrupt trigger level - assert low */ - hal_intc_irq_config(RTS_LISR_VECTOR, IRQ_EDGE_TRIGGER, IRQ_ACTIVE_LOW); - - if (ts->penirq_en){ - /* - Enable #PENIRQ interrupt */ - hal_intc_irq_enable(RTS_LISR_VECTOR); - } - } - - /* Reset SSP controller */ - SETB32(SSPC_CR2, SSPC_C2_SSPRST_BIT); - - /* Disable SSP data out */ - CLRR32(SSPC_CR2, SSPC_C2_SSPEN_MASK | SSPC_C2_TXDOE_MASK); - - /* setup sspc clock */ - _sspd_rts_set_sclk(RTS_ADS7846_DCLK_DEFAULT); - - _nds_kwait(RTS_RESET_WAIT); - - /* Set SSP frame format to SPI */ - OUT32(SSPC_CR0, ((0 << SSPC_C0_SCLKPH_BIT) & SSPC_C0_SCLKPH_MASK) | /* phase (1 not working for 16clk mode) */ - ((0 << SSPC_C0_SCLKPO_BIT) & SSPC_C0_SCLKPO_MASK) | /* polarity */ - ((SSPC_SSP_MASTER << SSPC_C0_OPM_SHIFT) & SSPC_C0_OPM_MASK) | /* operation mode */ - ((0 << SSPC_C0_LBM_BIT) & SSPC_C0_LBM_MASK) | /* loopback */ - ((SSPC_MOTO_SPI << SSPC_C0_FFMT_SHIFT) & SSPC_C0_FFMT_MASK)); /* frame format */ - - /* Clear FIFO garbage */ - SETR32(SSPC_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); - - - /* Restore CPU interrupt controller to previous level */ - hal_global_int_ctl(core_intl); - - return status; -} - -int _sspd_rts_probe(int *x, int *y, int *z1, int *z2, int *pressed){ - - uint32_t data[12]; - int t, i; - - /* Clear FIFO garbage */ - SETR32(SSPC_CR2, SSPC_C2_RXFCLR_MASK | SSPC_C2_TXFCLR_MASK); - - /* Enable SSP */ - SETB32(SSPC_CR2, SSPC_C2_SSPEN_BIT); - - /* Disable SSP data out temporarily */ - CLRB32(SSPC_CR2, SSPC_C2_TXDOE_BIT); - - /* [hw-limit] Wait until the ssp controller get ready */ - // _nds_kwait(RTS_DIN_WAIT); - - t = 0; - while (((IN32(SSPC_SR) & SSPC_SR_BUSY_MASK) != 0) && (t++ < RTS_DIN_TIMEOUT)) - ; - - DEBUG(0, 1, "[RTS] SR : 0x%08lx\n", IN32(SSPC_SR)); - - /* - * ------------------------------------------------------------------------ - * Timing of 16-clock-cycle per conversion - * - * power-up read y read x power down (full cycle) - * --------- --------- --------- --------------- - * dout (bytes) ctrl 0 ctrl 0 ctrl 0 ctrl 0 0 ____ - * din (bytes) 0 msb lsb msb lsb msb lsb msb lsb ____ - * ^^^^ ^^^^^^^^^ ^^^^^^^^^ ^^^^^^^^^ ^^^^^^^^ - * don't care x1 or y1 x2 or y2 don't care - * - * x = (x1 + x2) / 2 (if averaging was expected) - * y = (y1 + y2) / 2 (if averaging was expected) - * - * Note: Watch out SSP FIFO depth (12 for AG101/Leopard) - * ------------------------------------------------------------------------ - */ - - /* SPI dout ... */ -#ifndef CONFIG_PLAT_QEMU - /* power up */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RY); - OUT32(SSPC_DR, 0); - - /* read y */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RY); - OUT32(SSPC_DR, 0); - - /* read x */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RX); - OUT32(SSPC_DR, 0); - - /* read z1 */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RZ1); - OUT32(SSPC_DR, 0); - - /* read z2 && power down */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RZ2_PD); - OUT32(SSPC_DR, 0); - OUT32(SSPC_DR, 0); -#else - /* power up */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RY << 16); - OUT32(SSPC_DR, 0); - - /* read y */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RY << 16); - OUT32(SSPC_DR, 0); - - /* read x */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RX << 16); - OUT32(SSPC_DR, 0); - - /* read z1 */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RZ1 << 16); - OUT32(SSPC_DR, 0); - - /* read z2 && power down */ - OUT32(SSPC_DR, RTS_ADS7846_CTL_RZ2_PD << 16); - OUT32(SSPC_DR, 0); - OUT32(SSPC_DR, 0); -#endif - /* Enable SSP-TX out */ - SETB32(SSPC_CR2, SSPC_C2_TXDOE_BIT); - - /* SPI din ... */ - for (i = 0; i < 11; ++i){ - - /* Wait until data ready */ - t = 0; - while ((IN32(SSPC_SR) & SSPC_SR_RFVE_MASK) == 0){ - if ( ++t > RTS_DIN_TIMEOUT){ - - DEBUG(1, 1, "rts spi timeout at data[%d]\n", i); - goto _timeout; - } - } - /* Read data byte */ - data[i] = IN32(SSPC_DR); - DEBUG(0, 1, "[RTS] data[%d] %d, 0x%x\n", i, data[i], data[i]); - } - - /* Disable SSP data out */ - CLRR32(SSPC_CR2, SSPC_C2_SSPEN_MASK | SSPC_C2_TXDOE_MASK); - - /* Compose final data (12-bits or 8-bits) */ -#if ((RTS_ADS7846_RY & RTS_ADS7846_MODE_MASK) == (RTS_ADS7846_8_BITS << RTS_ADS7846_MODE_SHIFT)) - *y = RTS_ADS7846_8BITS_DATA(data[3], data[4]); - *x = RTS_ADS7846_8BITS_DATA(data[5], data[6]); - *z1 = RTS_ADS7846_8BITS_DATA(data[7], data[8]); - *z2 = RTS_ADS7846_8BITS_DATA(data[9], data[10]); -#else - *y = RTS_ADS7846_12BITS_DATA(data[3], data[4]); - *x = RTS_ADS7846_12BITS_DATA(data[5], data[6]); - *z1 = RTS_ADS7846_12BITS_DATA(data[7], data[8]); - *z2 = RTS_ADS7846_12BITS_DATA(data[9], data[10]); -#endif -#ifndef CONFIG_PLAT_QEMU - DEBUG(0, 1, "[RTS] y - %04d, msb(0x%02lx) lsb(0x%02lx)\n", *y, (data[3] & 0xff), (data[4] & 0xff)); - DEBUG(0, 1, "[RTS] x - %04d, msb(0x%02lx) lsb(0x%02lx)\n", *x, (data[5] & 0xff), (data[6] & 0xff)); - DEBUG(0, 1, "[RTS] z1 - %04d, msb(0x%02lx) lsb(0x%02lx)\n", *z1, (data[7] & 0xff), (data[8] & 0xff)); - DEBUG(0, 1, "[RTS] z2 - %04d, msb(0x%02lx) lsb(0x%02lx)\n", *z2, (data[9] & 0xff), (data[10] & 0xff)); -#else - DEBUG(0, 1, "[RTS] y - %d, msb(0x%x)%d, lsb(0x%x)%d\n", *y, data[3],data[3], data[4], data[4]); - DEBUG(0, 1, "[RTS] x - %d, msb(0x%x)%d, lsb(0x%x)%d\n", *x, data[5],data[5], data[6], data[6]); - DEBUG(0, 1, "[RTS] z1 - %d, msb(0x%x)%d, lsb(0x%x)%d\n", *z1, data[7],data[7], data[8], data[8]); - DEBUG(0, 1, "[RTS] z2 - %d, msb(0x%x)%d, lsb(0x%x)%d\n", *z2, data[9],data[9], data[10], data[10]); -#endif - if ((*z1 < RTS_PRESSED_Z1_MIN) && (*z2 >= RTS_PRESSED_Z2_MAX)) - *pressed = 0; - else - *pressed = 1; - - return HAL_SUCCESS; - -_timeout: - - return HAL_FAILURE; -} - -void ts_adjust(struct ts_dev *ts, int ts_x, int ts_y, int *x, int *y) -{ - *x = (ts->lcd_width * (ts_x - ts->left)) / (ts->right - ts->left); - *y = (ts->lcd_height * (ts_y - ts->top)) / (ts->bottom - ts->top); - DEBUG(0, 0, "adj (x, y) = (%4d, %4d)\n", *x, *y); -} - -void ts_raw_value(struct ts_dev *ts, int *x, int *y) -{ - hal_pend_semaphore(&ts->sem, HAL_SUSPEND); - - *x = ts->data.x; - *y = ts->data.y; - DEBUG(0, 0, "raw (x, y) = (%4d, %4d)\n", *x, *y); -} - -void ts_value(struct ts_dev *ts, int *x, int *y) -{ - int raw_x, raw_y; - ts_raw_value(ts, &raw_x, &raw_y); - ts_adjust(ts, raw_x, raw_y, x, y); -} - -void ts_calibrate(struct ts_dev *ts, - void (*draw_cross)(void *param, int x, int y), - int count) -{ - int i = 0; - int left = 0, right = 0, top = 0, bottom = 0; - - for (i = 0; i < count; i++) { - - int raw_x = 0, raw_y = 0; - - DEBUG(0, 0, "(left, top) = "); - draw_cross(NULL, ts->lcd_width * 1 / 5, ts->lcd_height * 1 / 5); - ts_raw_value(ts, &raw_x, &raw_y); - left = ((left * i) + raw_x) / (i + 1); - top = ((top * i) + raw_y) / (i + 1); - DEBUG(0, 0, "(%4d, %4d) || (x, y) = (%4d, %4d)\n", left, top, raw_x, raw_y); - - DEBUG(0, 0, "(right, bottom) = "); - draw_cross(NULL, ts->lcd_width * 4 / 5, ts->lcd_height * 4 / 5); - ts_raw_value(ts, &raw_x, &raw_y); - right = ((right * i) + raw_x) / (i + 1); - bottom = ((bottom * i) + raw_y) / (i + 1); - DEBUG(0, 0, "(%4d, %4d) || (x, y) = (%4d, %4d)\n", right, bottom, raw_x, raw_y); - } - - ts->left = left - (right - left) / 3; - ts->right = right + (right - left) / 3; - ts->top = top - (bottom - top) / 3; - ts->bottom = bottom + (bottom - top) / 3; -} diff --git a/bsp/AE210P/driver/ssp/sspd_rts.h b/bsp/AE210P/driver/ssp/sspd_rts.h deleted file mode 100644 index cdb2ba3516..0000000000 --- a/bsp/AE210P/driver/ssp/sspd_rts.h +++ /dev/null @@ -1,199 +0,0 @@ -/***************************************************************************** - * - * Copyright Andes Technology Corporation 2007-2008 - * All Rights Reserved. - * - * Revision History: - * - * Mar.16.2008 Created. - ****************************************************************************/ - -/***************************************************************************** - * - * FILE NAME VERSION - * - * sspd_rts.h - * - * DESCRIPTION - * - * SPI digital serial interface protocol header for resistive - * touch screen controller. - * - * DATA STRUCTURES - * - * None - * - * DEPENDENCIES - * - * None - * - ****************************************************************************/ -#ifndef __SSPD_RTS_H__ -#define __SSPD_RTS_H__ - -/***************************************************************************** - * Configuration Options - ****************************************************************************/ - -/* Non-zero to enable 16-clock per conversion mode, otherwise 24-clock cycle is applied. */ -#define RTS_16CLK_CONV_CYCLE 1 - -#define RTS_LISR_VECTOR INTC_HW0_BIT /* AG101 connects #PENIRQ to hw0 vector */ - -/* polling loop counter for waiting hw-reset */ -#define RTS_RESET_WAIT (0x300000) - -/* CPU polling counter to avoid bouncing signals of previous RTS operation */ -#define RTS_DEBOUNCE_WAIT (0x30000) - -/* polling counter for serial data in */ -#define RTS_DIN_TIMEOUT (0x30000) - -/* HISR definitions */ -#define RTS_HISR_PRIORITY 0 /* 0: highest, 2: lowest */ -#define RTS_HISR_STACK_SIZE 2048 /* Please align to 32-bit */ - -#define RTS_HISR_AS_TOUCHED 0x00000001 /* Activate HISR for touched interrupt */ - - -/***************************************************************************** - * Resistive Touch Screen Digital Interface Definitions - ****************************************************************************/ - -/* Definitions for ADS7846 */ - -/* Control Byte Bits */ -#define RTS_ADS7846_PD_MASK 0x03 /* Start Bit (MSB) */ -#define RTS_ADS7846_PD_SHIFT 0 - #define RTS_ADS7846_PD 0x00 /* power down between conversion, #penirq enabled */ - #define RTS_ADS7846_ADC 0x01 /* ref off, adc on, #penirq disabled */ - #define RTS_ADS7846_REF 0x02 /* ref on, adc off, #penirq enabled */ - #define RTS_ADS7846_PW 0x03 /* power on, ref on, adc on, #penirq disabled */ - -#define RTS_ADS7846_SER_MASK 0x04 /* Single-Ended/#Differential-Reference Register */ -#define RTS_ADS7846_SER_SHIFT 2 - #define RTS_ADS7846_DF 0x00 /* differential */ - #define RTS_ADS7846_SE 0x01 /* single-ended */ - -#define RTS_ADS7846_MODE_MASK 0x08 /* Conversion Selection Bit */ -#define RTS_ADS7846_MODE_SHIFT 3 - #define RTS_ADS7846_12_BITS 0x00 /* 12 bits conversion */ - #define RTS_ADS7846_8_BITS 0x01 /* 8 bits conversion */ - -#define RTS_ADS7846_MUX_MASK 0x70 /* (A2 ~ A0) Control the setting of multiplexer input */ -#define RTS_ADS7846_MUX_SHIFT 4 - - #define RTS_ADS7846_DF_X 0x05 /* [A2:A0] 101b, Driver: X+ X-, Measure Y+ */ - #define RTS_ADS7846_DF_Y 0x01 /* [A2:A0] 001b, Driver: Y+ Y-, Measure X+ */ - #define RTS_ADS7846_DF_Z1 0x03 /* [A2:A0] 011b, Driver: Y+ X-, Measure X+ */ - #define RTS_ADS7846_DF_Z2 0x04 /* [A2:A0] 100b, Driver: Y+ X-, Measure Y- */ - - #define RTS_ADS7846_SE_X 0x05 /* [A2:A0] 101b */ - #define RTS_ADS7846_SE_Y 0x01 /* [A2:A0] 001b */ - #define RTS_ADS7846_SE_Z1 0x03 /* [A2:A0] 011b */ - #define RTS_ADS7846_SE_Z2 0x04 /* [A2:A0] 100b */ - #define RTS_ADS7846_SE_BAT 0x02 /* [A2:A0] 010b */ - #define RTS_ADS7846_SE_AUX 0x06 /* [A2:A0] 110b */ - #define RTS_ADS7846_SE_TEMP0 0x00 /* [A2:A0] 000b */ - #define RTS_ADS7846_SE_TEMP1 0x07 /* [A2:A0] 111b */ - -#define RTS_ADS7846_START_MASK 0x80 /* Start Bit (MSB) */ -#define RTS_ADS7846_START_BIT 7 - #define RTS_ADS7846_START 1 - -/* Supplimental Macros */ -#define RTS_ADS7846_PADDING_BYTE 0 /* Padding byte feed after the command byte to continue serial clocking */ - -#define RTS_ADS7846_CTRL_BYTE(mux, mode, ser, pd) \ - ((((uint32_t)(mux) << RTS_ADS7846_MUX_SHIFT) & RTS_ADS7846_MUX_MASK) | \ - (((uint32_t)(mode) << RTS_ADS7846_MODE_SHIFT) & RTS_ADS7846_MODE_MASK) | \ - (((uint32_t)(ser) << RTS_ADS7846_SER_SHIFT) & RTS_ADS7846_SER_MASK) | \ - (((uint32_t)(pd) << RTS_ADS7846_PD_SHIFT) & RTS_ADS7846_PD_MASK) | \ - (uint32_t)RTS_ADS7846_START_MASK) - -/* this is correct */ -#define RTS_ADS7846_8BITS_DATA(msb, lsb) ((((uint32_t)(msb) & 0x07) << 5) | (((uint32_t)(lsb) & 0xff) >> 3)) -#ifndef CONFIG_PLAT_QEMU -#define RTS_ADS7846_12BITS_DATA(msb, lsb) ((((uint32_t)(msb) & 0x7f) << 5) | (((uint32_t)(lsb) & 0xff) >> 3)) -#else -#define RTS_ADS7846_12BITS_DATA(msb, lsb) msb -//#define RTS_ADS7846_12BITS_DATA(msb, lsb) ((msb >> 19) & 0xfff) -#endif - -/* Pre-defined Control-Byte Constants */ -#define RTS_ADS7846_CTL_RY RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Y, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PW) -#define RTS_ADS7846_CTL_RX RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_X, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PW) -#define RTS_ADS7846_CTL_RZ1 RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Z1, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PW) -#define RTS_ADS7846_CTL_RZ2 RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Z2, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PW) - -#define RTS_ADS7846_CTL_RY_PD RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Y, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PD) -#define RTS_ADS7846_CTL_RX_PD RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_X, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PD) -#define RTS_ADS7846_CTL_RZ1_PD RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Z1, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PD) -#define RTS_ADS7846_CTL_RZ2_PD RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Z2, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PD) -#define RTS_ADS7846_CTL_PD RTS_ADS7846_CTRL_BYTE(RTS_ADS7846_DF_Y, RTS_ADS7846_12_BITS, \ - RTS_ADS7846_DF, RTS_ADS7846_PD) -/* - * DCLK - * --------------- - * From pp3: - * 125 kHz max throughput rate, so ... - * DCLK_max = 125k * 16(16-clock-per-conversion mode) = 2.0MHz - * - * From table VI (p.p.14): - * (tch + tcl) = 400ns minimum, so ... - * DCLK_max = 1/400ns = 2.5MHz ? - */ -#define RTS_ADS7846_DCLK_MAX 2000000 /* adopt 2.0MHz for safe */ -#define RTS_ADS7846_DCLK_DEFAULT 125000 /* 7812 data per second (3906 x-y/sec, or 1953 x-y-z1-z2/sec) */ - - -/***************************************************************************** - * SSP Controller Resistive Touch Screen Driver-Supplement Interfaces - ****************************************************************************/ -struct ts_data { - - int x; - int y; - int z1; - int z2; - int pressed; - -}; - -struct ts_dev { - - int left; - int right; - int top; - int bottom; - - int lcd_width; - int lcd_height; - - int penirq; /* initialize touch screen driver in #penirq mode or polling mode */ - int penirq_en; /* enable #penirq after initialization if penirq is non-zero */ - - void *event_obj; /* (in) Event object to notify app about the interrupt. */ - struct ts_data *event_data; /* Client specified struct pointer to receive {x,y,touched} states */ - - hal_semaphore_t sem; - struct ts_data data; -}; - -extern int _sspd_rts_init(struct ts_dev *ts); -extern int _sspd_rts_probe(int *x, int *y, int *z1, int *z2, int *pressed); - -extern void ts_adjust(struct ts_dev *ts, int ts_x, int ts_y, int *x, int *y); -extern void ts_raw_value(struct ts_dev *ts, int *x, int *y); -extern void ts_value(struct ts_dev *ts, int *x, int *y); -extern void ts_init(struct ts_dev *ts); -extern void ts_calibrate(struct ts_dev *ts, void (*draw_cross)(void *param, int x, int y), int count); -#endif /* __SSPD_RTS_H__ */ diff --git a/bsp/AE210P/driver/uart/Kbuild b/bsp/AE210P/driver/uart/Kbuild deleted file mode 100644 index ae696493e1..0000000000 --- a/bsp/AE210P/driver/uart/Kbuild +++ /dev/null @@ -1,2 +0,0 @@ -lib-y := -lib-y += uart.o diff --git a/bsp/AE210P/driver/uart/uart.c b/bsp/AE210P/driver/uart/uart.c deleted file mode 100644 index 7196353307..0000000000 --- a/bsp/AE210P/driver/uart/uart.c +++ /dev/null @@ -1,143 +0,0 @@ -#include - -#define DEFAULT_BAUDRATE 115200 /* 8n1 */ - -#define IN8(reg) (uint8_t)((*(volatile unsigned long *)(reg)) & 0x000000FF) -#define READ_CLR(reg) (*(volatile unsigned long *)(reg)) - -int drv_uart_set_baudrate(int baudrate) -{ - unsigned long baud_div; /* baud rate divisor */ - unsigned long temp_word; - - baud_div = (MB_UCLK / (16 * baudrate)); - - /* Save LCR temporary */ - temp_word = IN8(STUARTC_BASE + UARTC_LCR_OFFSET); - - /* Setup dlab bit for baud rate setting */ - OUT8(STUARTC_BASE + UARTC_LCR_OFFSET, (temp_word | UARTC_LCR_DLAB)); - - /* Apply baud rate */ - OUT8(STUARTC_BASE + UARTC_DLM_OFFSET, (unsigned char)(baud_div >> 8)); - OUT8(STUARTC_BASE + UARTC_DLL_OFFSET, (unsigned char)baud_div); - OUT8(STUARTC_BASE + UARTC_PSR_OFFSET, (unsigned char)1); - - /* Restore LCR */ - OUT8(STUARTC_BASE + UARTC_LCR_OFFSET, temp_word); - - return 0; -} - -int drv_uart_is_kbd_hit(void) -{ - return IN8(STUARTC_BASE + UARTC_LSR_OFFSET) & UARTC_LSR_RDR; -} - -int drv_uart_get_char(void) -{ - while (!(IN8(STUARTC_BASE + UARTC_LSR_OFFSET) & UARTC_LSR_RDR)) - ; - - return IN8(STUARTC_BASE + UARTC_RBR_OFFSET); -} - -void drv_uart_put_char(int ch) -{ - while (!(IN8(STUARTC_BASE + UARTC_LSR_OFFSET) & UARTC_LSR_THRE)) - ; - - OUT8(STUARTC_BASE + UARTC_THR_OFFSET, ch); -} - -int drv_uart_init(void) -{ - /* Clear everything */ - OUT8(STUARTC_BASE + UARTC_IER_OFFSET, 0x0); - OUT8(STUARTC_BASE + UARTC_LCR_OFFSET, 0x0); - - /* Setup baud rate */ - drv_uart_set_baudrate(DEFAULT_BAUDRATE); - - /* Setup parity, data bits, and stop bits */ - OUT8(STUARTC_BASE + UARTC_LCR_OFFSET, \ - (UARTC_LCR_PARITY_NONE | UARTC_LCR_BITS8 | UARTC_LCR_STOP1)); - - return 0; -} - -/********************************************** - * - * Archer Chang - * - * driver API with reg base - * -***********************************************/ -int __drv_uart_set_baudrate(unsigned int regbase, int baudrate) -{ - unsigned long baud_div; /* baud rate divisor */ - unsigned long temp_word; - - baud_div = (MB_UCLK / (16 * baudrate)); - - /* Save LCR temporary */ - temp_word = IN8(regbase + UARTC_LCR_OFFSET); - - /* Setup dlab bit for baud rate setting */ - OUT8(regbase + UARTC_LCR_OFFSET, (temp_word | UARTC_LCR_DLAB)); - - /* Apply baud rate */ - OUT8(regbase + UARTC_DLM_OFFSET, (unsigned char)(baud_div >> 8)); - OUT8(regbase + UARTC_DLL_OFFSET, (unsigned char)baud_div); - OUT8(regbase + UARTC_PSR_OFFSET, (unsigned char)1); - - /* Restore LCR */ - OUT8(regbase + UARTC_LCR_OFFSET, temp_word); - - return 0; -} - -int __drv_uart_is_kbd_hit(unsigned int regbase) -{ - return IN8(regbase + UARTC_LSR_OFFSET) & UARTC_LSR_RDR; -} - -int __drv_uart_get_char(unsigned int regbase) -{ - while (!(IN8(regbase + UARTC_LSR_OFFSET) & UARTC_LSR_RDR)) - ; - - return IN8(regbase + UARTC_RBR_OFFSET); -} - -void __drv_uart_put_char(unsigned int regbase, int ch) -{ - while (!(IN8(regbase + UARTC_LSR_OFFSET) & UARTC_LSR_THRE)) - ; - - OUT8(regbase + UARTC_THR_OFFSET, ch); -} - -int __drv_uart_put_char_nowait(unsigned int regbase, int ch) -{ - OUT8(regbase + UARTC_THR_OFFSET, ch); - - return 1; -} - -int __drv_uart_init(unsigned int regbase, int baudrate) -{ - /* Clear everything */ - OUT8(regbase + UARTC_IER_OFFSET, 0x0); - OUT8(regbase + UARTC_LCR_OFFSET, 0x0); - - /* Setup baud rate */ - __drv_uart_set_baudrate(regbase, baudrate); - - /* Setup parity, data bits, and stop bits */ - OUT8(regbase + UARTC_LCR_OFFSET, \ - (UARTC_LCR_PARITY_NONE | UARTC_LCR_BITS8 | UARTC_LCR_STOP1)); - - return 0; -} - diff --git a/bsp/AE210P/driver/uart/uart.h b/bsp/AE210P/driver/uart/uart.h deleted file mode 100644 index adff80e64c..0000000000 --- a/bsp/AE210P/driver/uart/uart.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __DRV_UART_H__ -#define __DRV_UART_H__ - -extern int drv_uart_init(void); -extern int drv_uart_set_baudrate(int baudrate); -extern int drv_uart_is_kbd_hit(void); -extern int drv_uart_get_char(void); -extern void drv_uart_put_char(int ch); - -extern int __drv_uart_init (unsigned int regbase, int baudrate); -extern int __drv_uart_set_baudrate (unsigned int regbase, int baudrate); -extern int __drv_uart_is_kbd_hit (unsigned int regbase); -extern int __drv_uart_get_char (unsigned int regbase); -extern void __drv_uart_put_char (unsigned int regbase, int ch); -extern void __drv_uart_put_char_nowait(unsigned int regbase, int ch); - -#endif /* __DRV_UART_H__ */ diff --git a/bsp/AE210P/nds32.h b/bsp/AE210P/nds32.h deleted file mode 100644 index 8015eb51c3..0000000000 --- a/bsp/AE210P/nds32.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef __NDS32_H__ -#define __NDS32_H__ - -#include "nds32_defs.h" - -/* Support FPU */ -#if defined(__NDS32_EXT_FPU_DP__) || defined(__NDS32_EXT_FPU_SP__) -#define __TARGET_FPU_EXT -#if defined(__NDS32_EXT_FPU_CONFIG_0__) -#define FPU_REGS 8 -#elif defined(__NDS32_EXT_FPU_CONFIG_1__) -#define FPU_REGS 16 -#elif defined(__NDS32_EXT_FPU_CONFIG_2__) -#define FPU_REGS 32 -#elif defined(__NDS32_EXT_FPU_CONFIG_3__) -#define FPU_REGS 64 -#else -#error FPU register numbers no defined -#endif -#endif - -/* Support IFC */ -#ifdef __NDS32_EXT_IFC__ -#ifndef CONFIG_NO_NDS32_EXT_IFC -#define __TARGET_IFC_EXT -#endif -#endif - -/* Support ZOL */ -#ifdef CONFIG_HWZOL -#define __TARGET_ZOL_EXT -#endif - -#ifndef __ASSEMBLER__ - -#include "nds32_intrinsic.h" - -#define GIE_ENABLE() __nds32__gie_en() -#define GIE_DISABLE() __nds32__gie_dis() - -#ifdef CONFIG_CPU_DCACHE_ENABLE - -#define NDS_DCache_Flush nds32_dcache_flush -#define NDS_DCache_Invalidate_Flush nds32_dcache_invalidate -#define NDS_DCache_Writeback nds32_dcache_flush_range - -#else - -#define NDS_DCache_Flush() ((void)0) -#define NDS_DCache_Invalidate_Flush() ((void)0) -#define NDS_DCache_Writeback() ((void)0) - -#endif - -static inline void GIE_SAVE(unsigned long *var) -{ - *var = __nds32__mfsr(NDS32_SR_PSW); - GIE_DISABLE(); -} - -static inline void GIE_RESTORE(unsigned long var) -{ - if (var & PSW_mskGIE) - GIE_ENABLE(); -} - -extern void *OS_CPU_Vector_Table[32]; -typedef void (*isr_t)(int vector); - -static inline void register_isr(int vector, isr_t isr, isr_t *old) -{ - if (old) - *old = OS_CPU_Vector_Table[vector]; - - OS_CPU_Vector_Table[vector] = isr; -} - -#endif /* __ASSEMBLER__ */ - -#endif /* __NDS32_H__ */ diff --git a/bsp/AE210P/nds32_defs.h b/bsp/AE210P/nds32_defs.h deleted file mode 100644 index cf552806a0..0000000000 --- a/bsp/AE210P/nds32_defs.h +++ /dev/null @@ -1,1362 +0,0 @@ -/* - * Copyright (C) 2008 Andes Technology, Inc. - */ - -#ifndef __NDS32_DEFS_H__ -#define __NDS32_DEFS_H__ -/****************************************************************************** - * cr0: CPU_VER (CPU Version Register) - *****************************************************************************/ - -#define CPU_VER_offCFGID 0 /* Minor configuration */ -#define CPU_VER_offREV 16 /* Revision of the CPU version */ -#define CPU_VER_offCPUID 24 /* Major CPU versions */ - -#define CPU_VER_mskCFGID ( 0xFFFF << CPU_VER_offCFGID ) -#define CPU_VER_mskREV ( 0xFF << CPU_VER_offREV ) -#define CPU_VER_mskCPUID ( 0xFF << CPU_VER_offCPUID ) - -/****************************************************************************** - * cr1: ICM_CFG (Instruction Cache/Memory Configuration Register) - *****************************************************************************/ -#define ICM_CFG_offISET 0 /* I-cache sets (# of cache lines) per way */ -#define ICM_CFG_offIWAY 3 /* I-cache ways */ -#define ICM_CFG_offISZ 6 /* I-cache line size */ -#define ICM_CFG_offILCK 9 /* I-cache locking support */ -#define ICM_CFG_offILMB 10 /* On-chip ILM banks */ -#define ICM_CFG_offBSAV 13 /* ILM base register alignment version */ -#define ICM_CFG_offEXT 15 /* External ILM or not */ -#define ICM_CFG_offULM_2BANK 16 /* In ULM configuration, ILM has two banks */ -/* bit 17:31 reserved */ - -#define ICM_CFG_mskISET ( 0x7 << ICM_CFG_offISET ) -#define ICM_CFG_mskIWAY ( 0x7 << ICM_CFG_offIWAY ) -#define ICM_CFG_mskISZ ( 0x7 << ICM_CFG_offISZ ) -#define ICM_CFG_mskILCK ( 0x1 << ICM_CFG_offILCK ) -#define ICM_CFG_mskILMB ( 0x7 << ICM_CFG_offILMB ) -#define ICM_CFG_mskBSAV ( 0x3 << ICM_CFG_offBSAV ) -#define ICM_CFG_mskEXT ( 0x1 << ICM_CFG_offEXT ) -#define ICM_CFG_mskULM_2BANK ( 0x1 << ICM_CFG_offULM_2BANK ) - -/****************************************************************************** - * cr2: DCM_CFG (Data Cache/Memory Configuration Register) - *****************************************************************************/ -#define DCM_CFG_offDSET 0 /* D-cache sets (# of cache lines) per way */ -#define DCM_CFG_offDWAY 3 /* D-cache ways */ -#define DCM_CFG_offDSZ 6 /* D-cache line size */ -#define DCM_CFG_offDLCK 9 /* D-cache locking support */ -#define DCM_CFG_offDLMB 10 /* On-chip DLM banks */ -#define DCM_CFG_offBSAV 13 /* DLM base register alignment version */ -#define DCM_CFG_offEXT 15 /* External DLM or not */ -#define DCM_CFG_offULM_2BANK 16 /* In ULM configuration, DLM has two banks */ -/* bit 17:31 reserved */ - -#define DCM_CFG_mskDSET ( 0x7 << DCM_CFG_offDSET ) -#define DCM_CFG_mskDWAY ( 0x7 << DCM_CFG_offDWAY ) -#define DCM_CFG_mskDSZ ( 0x7 << DCM_CFG_offDSZ ) -#define DCM_CFG_mskDLCK ( 0x1 << DCM_CFG_offDLCK ) -#define DCM_CFG_mskDLMB ( 0x7 << DCM_CFG_offDLMB ) -#define DCM_CFG_mskBSAV ( 0x3 << DCM_CFG_offBSAV ) -#define DCM_CFG_mskEXT ( 0x1 << DCM_CFG_offEXT ) -#define DCM_CFG_mskULM_2BANK ( 0x1 << DCM_CFG_offULM_2BANK ) - -/****************************************************************************** - * cr3: MMU_CFG (MMU Configuration Register) - *****************************************************************************/ -#define MMU_CFG_offMMPS 0 /* Memory management protection scheme */ -#define MMU_CFG_offMMPV 2 /* Memory management protection version number */ -#define MMU_CFG_offFATB 7 /* Fully-associative or non-fully-associative TLB */ - -#ifdef CONFIG_FULL_ASSOC -#define MMU_CFG_offFATBSZ 8 /* TLB entries while using full-associative TLB */ -#else -#define MMU_CFG_offTBW 8 /* TLB ways(non-associative) TBS */ -#define MMU_CFG_offTBS 11 /* TLB sets per way(non-associative) TBS */ -/* bit 14:14 reserved */ -#endif - -#define MMU_CFG_offEP8MIN4 15 /* 8KB page supported while minimum page is 4KB */ -#define MMU_CFG_offfEPSZ 16 /* Extra page size supported */ -#define MMU_CFG_offTLBLCK 24 /* TLB locking support */ -#define MMU_CFG_offHPTWK 25 /* Hardware Page Table Walker implemented */ -#define MMU_CFG_offDE 26 /* Default endian */ -#define MMU_CFG_offNTPT 27 /* Partitions for non-translated attributes */ -#define MMU_CFG_offIVTB 28 /* Invisible TLB */ -#define MMU_CFG_offVLPT 29 /* VLPT for fast TLB fill handling implemented */ -#define MMU_CFG_offNTME 30 /* Non-translated VA to PA mapping */ -#define MMU_CFG_offDRDE 31 /* Device register default endian */ - -#define MMU_CFG_mskMMPS ( 0x3 << MMU_CFG_offMMPS ) -#define MMU_CFG_mskMMPV ( 0x1F << MMU_CFG_offMMPV ) -#define MMU_CFG_mskFATB ( 0x1 << MMU_CFG_offFATB ) -#ifdef CONFIG_FULL_ASSOC -#define MMU_CFG_mskFATBSZ ( 0x7f << MMU_CFG_offFATBSZ ) -#else -#define MMU_CFG_mskTBW ( 0x7 << MMU_CFG_offTBW ) -#define MMU_CFG_mskTBS ( 0x7 << MMU_CFG_offTBS ) -#endif -#define MMU_CFG_mskEP8MIN4 ( 0x1 << MMU_CFG_offEP8MIN4 ) -#define MMU_CFG_mskfEPSZ ( 0xFF << MMU_CFG_offfEPSZ ) -#define MMU_CFG_mskTLBLCK ( 0x1 << MMU_CFG_offTLBLCK ) -#define MMU_CFG_mskHPTWK ( 0x1 << MMU_CFG_offHPTWK ) -#define MMU_CFG_mskDE ( 0x1 << MMU_CFG_offDE ) -#define MMU_CFG_mskNTPT ( 0x1 << MMU_CFG_offNTPT ) -#define MMU_CFG_mskIVTB ( 0x1 << MMU_CFG_offIVTB ) -#define MMU_CFG_mskVLPT ( 0x1 << MMU_CFG_offVLPT ) -#define MMU_CFG_mskNTME ( 0x1 << MMU_CFG_offNTME ) -#define MMU_CFG_mskDRDE ( 0x1 << MMU_CFG_offDRDE ) - -/****************************************************************************** - * cr4: MSC_CFG (Misc Configuration Register) - *****************************************************************************/ -#define MSC_CFG_offEDM 0 /* EDM */ -#define MSC_CFG_offLMDMA 1 /* Local memory DMA engine */ -#define MSC_CFG_offPFM 2 /* Performance monitoring feature */ -#define MSC_CFG_offHSMP 3 /* HSMP_SADDR (V1 and V2 of HSMP) register */ -#define MSC_CFG_offTRACE 4 /* Debug Tracer Unit */ -#define MSC_CFG_offDIV 5 /* Divide instructions support */ -#define MSC_CFG_offMAC 6 /* Multiply instructions support */ -#define MSC_CFG_offAUDIO 7 /* AUDIO ISA extension support */ -#define MSC_CFG_offL2C 9 /* L2 unified cache */ -#define MSC_CFG_offRDREG 10 /* Reduced Register configuration */ -#define MSC_CFG_offADR24 11 /* Reduced Address Space to 24-bit configuration */ -#define MSC_CFG_offINTLC 12 /* interruption level configuration */ -#define MSC_CFG_offBASEV 13 /* Baseline instructions version */ -#define MSC_CFG_offNOD 16 /* Dx registers */ -#define MSC_CFG_offIMV 17 /* Implementation-dependent register detection scheme version */ -#define MSC_CFG_offIMR 18 /* First implementation-dependent register of SR encoding {2, 15, 0} */ -#define MSC_CFG_offIFC 19 /* IFC support */ -#define MSC_CFG_offMCU 20 /* MCU family */ -#define MSC_CFG_offSHADOW 21 /* shadow registers support */ -#define MSC_CFG_offEIT 24 /* EX9 support */ -#define MSC_CFG_offULM 25 /* ULM configuration */ -#define MSC_CFG_offPFT 26 /* Performance Throttling feature support */ -#define MSC_CFG_offHSP 27 /* HW Stack protection/recording feature support */ -/* bit 28:29 reserved */ -#define MSC_CFG_offMSC_EXT 30 /* Miscellaneous Configuration Extension */ - -#define MSC_CFG_mskEDM ( 0x1 << MSC_CFG_offEDM ) -#define MSC_CFG_mskLMDMA ( 0x1 << MSC_CFG_offLMDMA ) -#define MSC_CFG_mskPFM ( 0x1 << MSC_CFG_offPFM ) -#define MSC_CFG_mskHSMP ( 0x1 << MSC_CFG_offHSMP ) -#define MSC_CFG_mskTRACE ( 0x1 << MSC_CFG_offTRACE ) -#define MSC_CFG_mskDIV ( 0x1 << MSC_CFG_offDIV ) -#define MSC_CFG_mskMAC ( 0x1 << MSC_CFG_offMAC ) -#define MSC_CFG_mskAUDIO ( 0x3 << MSC_CFG_offAUDIO ) -#define MSC_CFG_mskL2C ( 0x1 << MSC_CFG_offL2C ) -#define MSC_CFG_mskRDREG ( 0x1 << MSC_CFG_offRDREG ) -#define MSC_CFG_mskADR24 ( 0x1 << MSC_CFG_offADR24 ) -#define MSC_CFG_mskINTLC ( 0x1 << MSC_CFG_offINTLC ) -#define MSC_CFG_mskBASEV ( 0x7 << MSC_CFG_offBASEV ) -#define MSC_CFG_mskNOD ( 0x1 << MSC_CFG_offNOD ) -#define MSC_CFG_mskIMV ( 0x1 << MSC_CFG_offIMV ) -#define MSC_CFG_mskIMR ( 0x1 << MSC_CFG_offIMR ) -#define MSC_CFG_mskIFC ( 0x1 << MSC_CFG_offIFC ) -#define MSC_CFG_mskMCU ( 0x1 << MSC_CFG_offMCU ) -#define MSC_CFG_mskSHADOW ( 0x7 << MSC_CFG_offSHADOW ) -#define MSC_CFG_mskEIT ( 0x1 << MSC_CFG_offEIT ) -#define MSC_CFG_mskULM ( 0x1 << MSC_CFG_offULM ) -#define MSC_CFG_mskPFT ( 0x1 << MSC_CFG_offPFT ) -#define MSC_CFG_mskHSP ( 0x1 << MSC_CFG_offHSP ) -#define MSC_CFG_mskMSC_EXT ( 0x3 << MSC_CFG_offMSC_EXT ) - -/****************************************************************************** - * cr5: CORE_CFG (Core Identification Register) - *****************************************************************************/ -#define CORE_ID_offCOREID 0 -/* bit 4:31 reserved */ - -#define CORE_ID_mskCOREID ( 0xF << CORE_ID_offCOREID ) - -/****************************************************************************** - * cr6: FUCOP_EXIST (FPU and Coprocessor Existence Configuration Register) - *****************************************************************************/ -#define FUCOP_EXIST_offCP0EX 0 /* Coprocessor #0 existence */ -#define FUCOP_EXIST_offCP1EX 1 /* Coprocessor #1 existence */ -#define FUCOP_EXIST_offCP2EX 2 /* Coprocessor #2 existence */ -#define FUCOP_EXIST_offCP3EX 3 /* Coprocessor #3 existence */ -/* bit 4:15 reserved */ -#define FUCOP_EXIST_offCPV 16 /* Coprocessor ISA extension version */ -/* bit 18:30 reserved */ -#define FUCOP_EXIST_offCP0ISFPU 31 /* Coprocessor #0 is FPU when CP0EX is 1 */ - -#define FUCOP_EXIST_mskCP0EX ( 0x1 << FUCOP_EXIST_offCP0EX ) -#define FUCOP_EXIST_mskCP1EX ( 0x1 << FUCOP_EXIST_offCP1EX ) -#define FUCOP_EXIST_mskCP2EX ( 0x1 << FUCOP_EXIST_offCP2EX ) -#define FUCOP_EXIST_mskCP3EX ( 0x1 << FUCOP_EXIST_offCP3EX ) -#define FUCOP_EXIST_mskCPV ( 0x3 << FUCOP_EXIST_offCPV ) -#define FUCOP_EXIST_mskCP0ISFPU ( 0x1 << FUCOP_EXIST_offCP0ISFPU ) - -/****************************************************************************** - * ir0: PSW (Processor Status Word Register) - * ir1: IPSW (Interruption PSW Register) - * ir2: P_IPSW (Previous IPSW Register) - *****************************************************************************/ -#define PSW_offGIE 0 /* Global Interrupt Enable */ -#define PSW_offINTL 1 /* Interruption Stack Level */ -#define PSW_offPOM 3 /* Processor Operation Mode, User/Superuser */ -#define PSW_offBE 5 /* Endianness for data memory access, 1:MSB, 0:LSB */ -#define PSW_offIT 6 /* Enable instruction address translation */ -#define PSW_offDT 7 /* Enable data address translation */ -#define PSW_offIME 8 /* Instruction Machine Error flag */ -#define PSW_offDME 9 /* Data Machine Error flag */ -#define PSW_offDEX 10 /* Debug Exception */ -#define PSW_offHSS 11 /* Hardware Single Stepping */ -#define PSW_offDRBE 12 /* Device Register Endian mode for device register */ -#define PSW_offAEN 13 /* Audio ISA special features enable control */ -#define PSW_offWBNA 14 /* write-back, write-allocation to write-back, no-write-allocation */ -#define PSW_offIFCON 15 /* Hardware Single Stepping */ -#define PSW_offCPL 16 /* Current Priority Level */ -/* bit 19 reserved */ -#define PSW_offOV 20 /* Overflow flag for saturation arithmetic instructions */ -#define PSW_offPFT_EN 21 /* Enable performance throttling */ -/* bit 22:31 reserved */ - -#define PSW_mskGIE ( 0x1 << PSW_offGIE ) -#define PSW_mskINTL ( 0x3 << PSW_offINTL ) -#define PSW_mskPOM ( 0x3 << PSW_offPOM ) -#define PSW_mskBE ( 0x1 << PSW_offBE ) -#define PSW_mskIT ( 0x1 << PSW_offIT ) -#define PSW_mskDT ( 0x1 << PSW_offDT ) -#define PSW_mskIME ( 0x1 << PSW_offIME ) -#define PSW_mskDME ( 0x1 << PSW_offDME ) -#define PSW_mskDEX ( 0x1 << PSW_offDEX ) -#define PSW_mskHSS ( 0x1 << PSW_offHSS ) -#define PSW_mskDRBE ( 0x1 << PSW_offDRBE ) -#define PSW_mskAEN ( 0x1 << PSW_offAEN ) -#define PSW_mskWBNA ( 0x1 << PSW_offWBNA ) -#define PSW_mskIFCON ( 0x1 << PSW_offIFCON ) -#define PSW_mskCPL ( 0x7 << PSW_offCPL ) -#define PSW_mskOV ( 0x1 << PSW_offOV ) -#define PSW_mskPFT_EN ( 0x1 << PSW_offPFT_EN ) - -/****************************************************************************** - * ir3: IVB (Interruption Vector Base Register) - *****************************************************************************/ -#define IVB_offPROG_PRI_LVL 0 /* Programmable Priority Level *///// -#define IVB_offNIVIC 1 /* Number of input for Internal Vector Interrupt Controller*/ -/* bit 4:10 reserved */ -#define IVB_offIVIC_VER 11 /* Internal Vectored Interrupt Controller (IVIC) Version */ -#define IVB_offEVIC 13 /* External Vector Interrupt Controller mode */ -#define IVB_offESZ 14 /* Size of each vector entry */ -#define IVB_offIVBASE 16 /* BasePA of interrupt vector table */ - -#define IVB_mskPROG_PRI_LVL ( 0x1 << IVB_offPROG_PRI_LVL) -#define IVB_mskNIVIC ( 0x7 << IVB_offNIVIC) -#define IVB_mskIVIC_VER ( 0x3 << IVB_offIVIC_VER ) -#define IVB_mskEVIC ( 0x1 << IVB_offEVIC ) -#define IVB_mskESZ ( 0x3 << IVB_offESZ ) -#define IVB_mskIVBASE ( 0xFFFF << IVB_offIVBASE ) - -/****************************************************************************** - * ir4: EVA (Exception Virtual Address Register) - * ir5: P_EVA (Previous EVA Register) - *****************************************************************************/ - - /* This register contains the VA that causes the exception */ - -/****************************************************************************** - * ir6: ITYPE (Interruption Type Register) - * ir7: P_ITYPE (Previous ITYPE Register) - *****************************************************************************/ -#define ITYPE_offETYPE 0 /* Exception Type */ -#define ITYPE_offINST 4 /* Exception caused by insn fetch or data access */ -/* bit 5:15 reserved */ -#define ITYPE_offSWID 16 /* SWID of debugging exception */ -/* bit 31:31 reserved */ - -#define ITYPE_mskETYPE ( 0xF << ITYPE_offETYPE ) -#define ITYPE_mskINST ( 0x1 << ITYPE_offINST ) -#define ITYPE_mskSWID ( 0x7FFF << ITYPE_offSWID ) - -/****************************************************************************** - * ir8: MERR (Machine Error Log Register) - *****************************************************************************/ -/* bit 0:30 reserved */ -#define MERR_offBUSERR 31 /* Bus error caused by a load insn */ - -#define MERR_mskBUSERR ( 0x1 << MERR_offBUSERR ) - -/****************************************************************************** - * ir9: IPC (Interruption Program Counter Register) - * ir10: P_IPC (Previous IPC Register) - * ir11: OIPC (Overflow Interruption Program Counter Register) - *****************************************************************************/ - - /* This is the shadow stack register of the Program Counter */ - -/****************************************************************************** - * ir12: P_P0 (Previous P0 Register) - * ir13: P_P1 (Previous P1 Register) - *****************************************************************************/ - - /* These are shadow registers of $p0 and $p1 */ - -/****************************************************************************** - * ir14: INT_MASK (Interruption Masking Register) - *****************************************************************************/ -#define INT_MASK_offH0IM 0 /* Hardware Interrupt 0 Mask bit */ -#define INT_MASK_offH1IM 1 /* Hardware Interrupt 1 Mask bit */ -#define INT_MASK_offH2IM 2 /* Hardware Interrupt 2 Mask bit */ -#define INT_MASK_offH3IM 3 /* Hardware Interrupt 3 Mask bit */ -#define INT_MASK_offH4IM 4 /* Hardware Interrupt 4 Mask bit */ -#define INT_MASK_offH5IM 5 /* Hardware Interrupt 5 Mask bit */ -#define INT_MASK_offH6IM 6 /* Hardware Interrupt 6 Mask bit */ -#define INT_MASK_offH7IM 7 /* Hardware Interrupt 7 Mask bit */ -#define INT_MASK_offH8IM 8 /* Hardware Interrupt 8 Mask bit */ -#define INT_MASK_offH9IM 9 /* Hardware Interrupt 9 Mask bit */ -#define INT_MASK_offH10IM 10 /* Hardware Interrupt 10 Mask bit */ -#define INT_MASK_offH11IM 11 /* Hardware Interrupt 11 Mask bit */ -#define INT_MASK_offH12IM 12 /* Hardware Interrupt 12 Mask bit */ -#define INT_MASK_offH13IM 13 /* Hardware Interrupt 13 Mask bit */ -#define INT_MASK_offH14IM 14 /* Hardware Interrupt 14 Mask bit */ -#define INT_MASK_offH15IM 15 /* Hardware Interrupt 15 Mask bit */ -#define INT_MASK_offSIM 16 /* Software Interrupt Mask bit */ -/* bit 17:28 reserved */ -#define INT_MASK_offALZ 29 /* All zero opcode reserved instruction exception mask */ -#define INT_MASK_offIDIVZE 30 /* Enable detection for Divide-By-Zero */ -#define INT_MASK_offDSSIM 31 /* Default Single Stepping Interruption Mask */ - -#define INT_MASK_mskH0IM ( 0x1 << INT_MASK_offH0IM ) -#define INT_MASK_mskH1IM ( 0x1 << INT_MASK_offH1IM ) -#define INT_MASK_mskH2IM ( 0x1 << INT_MASK_offH2IM ) -#define INT_MASK_mskH3IM ( 0x1 << INT_MASK_offH3IM ) -#define INT_MASK_mskH4IM ( 0x1 << INT_MASK_offH4IM ) -#define INT_MASK_mskH5IM ( 0x1 << INT_MASK_offH5IM ) -#define INT_MASK_mskH6IM ( 0x1 << INT_MASK_offH6IM ) -#define INT_MASK_mskH7IM ( 0x1 << INT_MASK_offH7IM ) -#define INT_MASK_mskH8IM ( 0x1 << INT_MASK_offH8IM ) -#define INT_MASK_mskH9IM ( 0x1 << INT_MASK_offH9IM ) -#define INT_MASK_mskH10IM ( 0x1 << INT_MASK_offH10IM ) -#define INT_MASK_mskH11IM ( 0x1 << INT_MASK_offH11IM ) -#define INT_MASK_mskH12IM ( 0x1 << INT_MASK_offH12IM ) -#define INT_MASK_mskH13IM ( 0x1 << INT_MASK_offH13IM ) -#define INT_MASK_mskH14IM ( 0x1 << INT_MASK_offH14IM ) -#define INT_MASK_mskH15IM ( 0x1 << INT_MASK_offH15IM ) -#define INT_MASK_mskSIM ( 0x1 << INT_MASK_offSIM ) -#define INT_MASK_mskALZ ( 0x1 << INT_MASK_offALZ ) -#define INT_MASK_mskIDIVZE ( 0x1 << INT_MASK_offIDIVZE ) -#define INT_MASK_mskDSSIM ( 0x1 << INT_MASK_offDSSIM ) - -/****************************************************************************** - * ir15: INT_PEND (Interruption Pending Register) - *****************************************************************************/ -#define INT_PEND_offH0I 0 /* Hardware Interrupt 0 pending bit */ -#define INT_PEND_offH1I 1 /* Hardware Interrupt 1 pending bit */ -#define INT_PEND_offH2I 2 /* Hardware Interrupt 2 pending bit */ -#define INT_PEND_offH3I 3 /* Hardware Interrupt 3 pending bit */ -#define INT_PEND_offH4I 4 /* Hardware Interrupt 4 pending bit */ -#define INT_PEND_offH5I 5 /* Hardware Interrupt 5 pending bit */ -#define INT_PEND_offH6I 6 /* Hardware Interrupt 6 pending bit */ -#define INT_PEND_offH7I 7 /* Hardware Interrupt 7 pending bit */ -#define INT_PEND_offH8I 8 /* Hardware Interrupt 8 pending bit */ -#define INT_PEND_offH9I 9 /* Hardware Interrupt 9 pending bit */ -#define INT_PEND_offH10I 10 /* Hardware Interrupt 10 pending bit */ -#define INT_PEND_offH11I 11 /* Hardware Interrupt 11 pending bit */ -#define INT_PEND_offH12I 12 /* Hardware Interrupt 12 pending bit */ -#define INT_PEND_offH13I 13 /* Hardware Interrupt 13 pending bit */ -#define INT_PEND_offH14I 14 /* Hardware Interrupt 14 pending bit */ -#define INT_PEND_offH15I 15 /* Hardware Interrupt 15 pending bit */ - -#define INT_PEND_offCIPL 0 /* Current Interrupt Priority Level */ - -#define INT_PEND_offSWI 16 /* Software Interrupt pending bit */ -/* bit 17:31 reserved */ - -#define INT_PEND_mskH0I ( 0x1 << INT_PEND_offH0I ) -#define INT_PEND_mskH1I ( 0x1 << INT_PEND_offH1I ) -#define INT_PEND_mskH2I ( 0x1 << INT_PEND_offH2I ) -#define INT_PEND_mskH3I ( 0x1 << INT_PEND_offH3I ) -#define INT_PEND_mskH4I ( 0x1 << INT_PEND_offH4I ) -#define INT_PEND_mskH5I ( 0x1 << INT_PEND_offH5I ) -#define INT_PEND_mskH6I ( 0x1 << INT_PEND_offH6I ) -#define INT_PEND_mskH7I ( 0x1 << INT_PEND_offH7I ) -#define INT_PEND_mskH8I ( 0x1 << INT_PEND_offH8I ) -#define INT_PEND_mskH9I ( 0x1 << INT_PEND_offH9I ) -#define INT_PEND_mskH10I ( 0x1 << INT_PEND_offH10I ) -#define INT_PEND_mskH11I ( 0x1 << INT_PEND_offH11I ) -#define INT_PEND_mskH12I ( 0x1 << INT_PEND_offH12I ) -#define INT_PEND_mskH13I ( 0x1 << INT_PEND_offH13I ) -#define INT_PEND_mskH14I ( 0x1 << INT_PEND_offH14I ) -#define INT_PEND_mskH15I ( 0x1 << INT_PEND_offH15I ) -#define INT_PEND_mskCIPL ( 0x1 << INT_PEND_offCIPL ) -#define INT_PEND_mskSWI ( 0x1 << INT_PEND_offSWI ) - -/****************************************************************************** - * ir16: SP_USR (Shadowed User Stack Pointer Register) - * ir17: SP_PRIV (Shadowed Privileged Stack Pointer Register) - *****************************************************************************/ - - /* These are shadow registers of $sp */ - -/****************************************************************************** - * ir18: INT_PRI (Interrupt Priority Register) - *****************************************************************************/ -#define INT_PRI_offH0PRI 0 /* Hardware Interrupt 0 Priority Level */ -#define INT_PRI_offH1PRI 2 /* Hardware Interrupt 1 Priority Level */ -#define INT_PRI_offH2PRI 4 /* Hardware Interrupt 2 Priority Level */ -#define INT_PRI_offH3PRI 6 /* Hardware Interrupt 3 Priority Level */ -#define INT_PRI_offH4PRI 8 /* Hardware Interrupt 4 Priority Level */ -#define INT_PRI_offH5PRI 10 /* Hardware Interrupt 5 Priority Level */ -#define INT_PRI_offH6PRI 12 /* Hardware Interrupt 6 Priority Level */ -#define INT_PRI_offH7PRI 14 /* Hardware Interrupt 7 Priority Level */ -#define INT_PRI_offH8PRI 16 /* Hardware Interrupt 8 Priority Level */ -#define INT_PRI_offH9PRI 18 /* Hardware Interrupt 9 Priority Level */ -#define INT_PRI_offH10PRI 20 /* Hardware Interrupt 10 Priority Level */ -#define INT_PRI_offH11PRI 22 /* Hardware Interrupt 11 Priority Level */ -#define INT_PRI_offH12PRI 24 /* Hardware Interrupt 12 Priority Level */ -#define INT_PRI_offH13PRI 26 /* Hardware Interrupt 13 Priority Level */ -#define INT_PRI_offH14PRI 28 /* Hardware Interrupt 14 Priority Level */ -#define INT_PRI_offH15PRI 30 /* Hardware Interrupt 15 Priority Level */ - -#define INT_PRI_mskH0PRI ( 0x3 << INT_PRI_offH0PRI ) -#define INT_PRI_mskH1PRI ( 0x3 << INT_PRI_offH1PRI ) -#define INT_PRI_mskH2PRI ( 0x3 << INT_PRI_offH2PRI ) -#define INT_PRI_mskH3PRI ( 0x3 << INT_PRI_offH3PRI ) -#define INT_PRI_mskH4PRI ( 0x3 << INT_PRI_offH4PRI ) -#define INT_PRI_mskH5PRI ( 0x3 << INT_PRI_offH5PRI ) -#define INT_PRI_mskH6PRI ( 0x3 << INT_PRI_offH6PRI ) -#define INT_PRI_mskH7PRI ( 0x3 << INT_PRI_offH7PRI ) -#define INT_PRI_mskH8PRI ( 0x3 << INT_PRI_offH8PRI ) -#define INT_PRI_mskH9PRI ( 0x3 << INT_PRI_offH9PRI ) -#define INT_PRI_mskH10PRI ( 0x3 << INT_PRI_offH10PRI ) -#define INT_PRI_mskH11PRI ( 0x3 << INT_PRI_offH11PRI ) -#define INT_PRI_mskH12PRI ( 0x3 << INT_PRI_offH12PRI ) -#define INT_PRI_mskH13PRI ( 0x3 << INT_PRI_offH13PRI ) -#define INT_PRI_mskH14PRI ( 0x3 << INT_PRI_offH14PRI ) -#define INT_PRI_mskH15PRI ( 0x3 << INT_PRI_offH15PRI ) - -/****************************************************************************** - * ir19: INT_CTRL (Interrupt Control Register) - *****************************************************************************/ -#define INT_CTRL_offPPL2FIX_EN 0 -/* bit 1:31 reserved */ - -#define INT_CTRL_mskPPL2FIX_EN ( 0x1 << INT_CTRL_offPPL2FIX_EN ) - -/****************************************************************************** - * ir26: INT_MASK2 (Interruption Masking Register 2) - *****************************************************************************/ -#define INT_MASK2_offH0IM 0 /* Hardware Interrupt 0 Mask bit */ -#define INT_MASK2_offH1IM 1 /* Hardware Interrupt 1 Mask bit */ -#define INT_MASK2_offH2IM 2 /* Hardware Interrupt 2 Mask bit */ -#define INT_MASK2_offH3IM 3 /* Hardware Interrupt 3 Mask bit */ -#define INT_MASK2_offH4IM 4 /* Hardware Interrupt 4 Mask bit */ -#define INT_MASK2_offH5IM 5 /* Hardware Interrupt 5 Mask bit */ -#define INT_MASK2_offH6IM 6 /* Hardware Interrupt 6 Mask bit */ -#define INT_MASK2_offH7IM 7 /* Hardware Interrupt 7 Mask bit */ -#define INT_MASK2_offH8IM 8 /* Hardware Interrupt 8 Mask bit */ -#define INT_MASK2_offH9IM 9 /* Hardware Interrupt 9 Mask bit */ -#define INT_MASK2_offH10IM 10 /* Hardware Interrupt 10 Mask bit */ -#define INT_MASK2_offH11IM 11 /* Hardware Interrupt 11 Mask bit */ -#define INT_MASK2_offH12IM 12 /* Hardware Interrupt 12 Mask bit */ -#define INT_MASK2_offH13IM 13 /* Hardware Interrupt 13 Mask bit */ -#define INT_MASK2_offH14IM 14 /* Hardware Interrupt 14 Mask bit */ -#define INT_MASK2_offH15IM 15 /* Hardware Interrupt 15 Mask bit */ -#define INT_MASK2_offH16IM 16 /* Hardware Interrupt 16 Mask bit */ -#define INT_MASK2_offH17IM 17 /* Hardware Interrupt 17 Mask bit */ -#define INT_MASK2_offH18IM 18 /* Hardware Interrupt 18 Mask bit */ -#define INT_MASK2_offH19IM 19 /* Hardware Interrupt 19 Mask bit */ -#define INT_MASK2_offH20IM 20 /* Hardware Interrupt 20 Mask bit */ -#define INT_MASK2_offH21IM 21 /* Hardware Interrupt 21 Mask bit */ -#define INT_MASK2_offH22IM 22 /* Hardware Interrupt 22 Mask bit */ -#define INT_MASK2_offH23IM 23 /* Hardware Interrupt 23 Mask bit */ -#define INT_MASK2_offH24IM 24 /* Hardware Interrupt 24 Mask bit */ -#define INT_MASK2_offH25IM 25 /* Hardware Interrupt 25 Mask bit */ -#define INT_MASK2_offH26IM 26 /* Hardware Interrupt 26 Mask bit */ -#define INT_MASK2_offH27IM 27 /* Hardware Interrupt 27 Mask bit */ -#define INT_MASK2_offH28IM 28 /* Hardware Interrupt 28 Mask bit */ -#define INT_MASK2_offH29IM 29 /* Hardware Interrupt 29 Mask bit */ -#define INT_MASK2_offH30IM 30 /* Hardware Interrupt 30 Mask bit */ -#define INT_MASK2_offH31IM 31 /* Hardware Interrupt 31 Mask bit */ - -#define INT_MASK2_mskH0IM ( 0x1 << INT_MASK2_offH0IM ) -#define INT_MASK2_mskH1IM ( 0x1 << INT_MASK2_offH1IM ) -#define INT_MASK2_mskH2IM ( 0x1 << INT_MASK2_offH2IM ) -#define INT_MASK2_mskH3IM ( 0x1 << INT_MASK2_offH3IM ) -#define INT_MASK2_mskH4IM ( 0x1 << INT_MASK2_offH4IM ) -#define INT_MASK2_mskH5IM ( 0x1 << INT_MASK2_offH5IM ) -#define INT_MASK2_mskH6IM ( 0x1 << INT_MASK2_offH6IM ) -#define INT_MASK2_mskH7IM ( 0x1 << INT_MASK2_offH7IM ) -#define INT_MASK2_mskH8IM ( 0x1 << INT_MASK2_offH8IM ) -#define INT_MASK2_mskH9IM ( 0x1 << INT_MASK2_offH9IM ) -#define INT_MASK2_mskH10IM ( 0x1 << INT_MASK2_offH10IM ) -#define INT_MASK2_mskH11IM ( 0x1 << INT_MASK2_offH11IM ) -#define INT_MASK2_mskH12IM ( 0x1 << INT_MASK2_offH12IM ) -#define INT_MASK2_mskH13IM ( 0x1 << INT_MASK2_offH13IM ) -#define INT_MASK2_mskH14IM ( 0x1 << INT_MASK2_offH14IM ) -#define INT_MASK2_mskH15IM ( 0x1 << INT_MASK2_offH15IM ) -#define INT_MASK2_mskH16IM ( 0x1 << INT_MASK2_offH16IM ) -#define INT_MASK2_mskH17IM ( 0x1 << INT_MASK2_offH17IM ) -#define INT_MASK2_mskH18IM ( 0x1 << INT_MASK2_offH18IM ) -#define INT_MASK2_mskH19IM ( 0x1 << INT_MASK2_offH19IM ) -#define INT_MASK2_mskH20IM ( 0x1 << INT_MASK2_offH20IM ) -#define INT_MASK2_mskH21IM ( 0x1 << INT_MASK2_offH21IM ) -#define INT_MASK2_mskH22IM ( 0x1 << INT_MASK2_offH22IM ) -#define INT_MASK2_mskH23IM ( 0x1 << INT_MASK2_offH23IM ) -#define INT_MASK2_mskH24IM ( 0x1 << INT_MASK2_offH24IM ) -#define INT_MASK2_mskH25IM ( 0x1 << INT_MASK2_offH25IM ) -#define INT_MASK2_mskH26IM ( 0x1 << INT_MASK2_offH26IM ) -#define INT_MASK2_mskH27IM ( 0x1 << INT_MASK2_offH27IM ) -#define INT_MASK2_mskH28IM ( 0x1 << INT_MASK2_offH28IM ) -#define INT_MASK2_mskH29IM ( 0x1 << INT_MASK2_offH29IM ) -#define INT_MASK2_mskH30IM ( 0x1 << INT_MASK2_offH30IM ) -#define INT_MASK2_mskH31IM ( 0x1 << INT_MASK2_offH31IM ) - -/****************************************************************************** - * ir27: INT_PEND2 (Interruption Pending Register 2) - *****************************************************************************/ -#define INT_PEND2_offH0I 0 /* Hardware Interrupt 0 Pending bit */ -#define INT_PEND2_offH1I 1 /* Hardware Interrupt 1 Pending bit */ -#define INT_PEND2_offH2I 2 /* Hardware Interrupt 2 Pending bit */ -#define INT_PEND2_offH3I 3 /* Hardware Interrupt 3 Pending bit */ -#define INT_PEND2_offH4I 4 /* Hardware Interrupt 4 Pending bit */ -#define INT_PEND2_offH5I 5 /* Hardware Interrupt 5 Pending bit */ -#define INT_PEND2_offH6I 6 /* Hardware Interrupt 6 Pending bit */ -#define INT_PEND2_offH7I 7 /* Hardware Interrupt 7 Pending bit */ -#define INT_PEND2_offH8I 8 /* Hardware Interrupt 8 Pending bit */ -#define INT_PEND2_offH9I 9 /* Hardware Interrupt 9 Pending bit */ -#define INT_PEND2_offH10I 10 /* Hardware Interrupt 10 Pending bit */ -#define INT_PEND2_offH11I 11 /* Hardware Interrupt 11 Pending bit */ -#define INT_PEND2_offH12I 12 /* Hardware Interrupt 12 Pending bit */ -#define INT_PEND2_offH13I 13 /* Hardware Interrupt 13 Pending bit */ -#define INT_PEND2_offH14I 14 /* Hardware Interrupt 14 Pending bit */ -#define INT_PEND2_offH15I 15 /* Hardware Interrupt 15 Pending bit */ -#define INT_PEND2_offH16I 16 /* Hardware Interrupt 16 Pending bit */ -#define INT_PEND2_offH17I 17 /* Hardware Interrupt 17 Pending bit */ -#define INT_PEND2_offH18I 18 /* Hardware Interrupt 18 Pending bit */ -#define INT_PEND2_offH19I 19 /* Hardware Interrupt 19 Pending bit */ -#define INT_PEND2_offH20I 20 /* Hardware Interrupt 20 Pending bit */ -#define INT_PEND2_offH21I 21 /* Hardware Interrupt 21 Pending bit */ -#define INT_PEND2_offH22I 22 /* Hardware Interrupt 22 Pending bit */ -#define INT_PEND2_offH23I 23 /* Hardware Interrupt 23 Pending bit */ -#define INT_PEND2_offH24I 24 /* Hardware Interrupt 24 Pending bit */ -#define INT_PEND2_offH25I 25 /* Hardware Interrupt 25 Pending bit */ -#define INT_PEND2_offH26I 26 /* Hardware Interrupt 26 Pending bit */ -#define INT_PEND2_offH27I 27 /* Hardware Interrupt 27 Pending bit */ -#define INT_PEND2_offH28I 28 /* Hardware Interrupt 28 Pending bit */ -#define INT_PEND2_offH29I 29 /* Hardware Interrupt 29 Pending bit */ -#define INT_PEND2_offH30I 30 /* Hardware Interrupt 30 Pending bit */ -#define INT_PEND2_offH31I 31 /* Hardware Interrupt 31 Pending bit */ - -#define INT_PEND2_mskH0I ( 0x1 << INT_PEND2_offH0I ) -#define INT_PEND2_mskH1I ( 0x1 << INT_PEND2_offH1I ) -#define INT_PEND2_mskH2I ( 0x1 << INT_PEND2_offH2I ) -#define INT_PEND2_mskH3I ( 0x1 << INT_PEND2_offH3I ) -#define INT_PEND2_mskH4I ( 0x1 << INT_PEND2_offH4I ) -#define INT_PEND2_mskH5I ( 0x1 << INT_PEND2_offH5I ) -#define INT_PEND2_mskH6I ( 0x1 << INT_PEND2_offH6I ) -#define INT_PEND2_mskH7I ( 0x1 << INT_PEND2_offH7I ) -#define INT_PEND2_mskH8I ( 0x1 << INT_PEND2_offH8I ) -#define INT_PEND2_mskH9I ( 0x1 << INT_PEND2_offH9I ) -#define INT_PEND2_mskH10I ( 0x1 << INT_PEND2_offH10I ) -#define INT_PEND2_mskH11I ( 0x1 << INT_PEND2_offH11I ) -#define INT_PEND2_mskH12I ( 0x1 << INT_PEND2_offH12I ) -#define INT_PEND2_mskH13I ( 0x1 << INT_PEND2_offH13I ) -#define INT_PEND2_mskH14I ( 0x1 << INT_PEND2_offH14I ) -#define INT_PEND2_mskH15I ( 0x1 << INT_PEND2_offH15I ) -#define INT_PEND2_mskH16I ( 0x1 << INT_PEND2_offH16I ) -#define INT_PEND2_mskH17I ( 0x1 << INT_PEND2_offH17I ) -#define INT_PEND2_mskH18I ( 0x1 << INT_PEND2_offH18I ) -#define INT_PEND2_mskH19I ( 0x1 << INT_PEND2_offH19I ) -#define INT_PEND2_mskH20I ( 0x1 << INT_PEND2_offH20I ) -#define INT_PEND2_mskH21I ( 0x1 << INT_PEND2_offH21I ) -#define INT_PEND2_mskH22I ( 0x1 << INT_PEND2_offH22I ) -#define INT_PEND2_mskH23I ( 0x1 << INT_PEND2_offH23I ) -#define INT_PEND2_mskH24I ( 0x1 << INT_PEND2_offH24I ) -#define INT_PEND2_mskH25I ( 0x1 << INT_PEND2_offH25I ) -#define INT_PEND2_mskH26I ( 0x1 << INT_PEND2_offH26I ) -#define INT_PEND2_mskH27I ( 0x1 << INT_PEND2_offH27I ) -#define INT_PEND2_mskH28I ( 0x1 << INT_PEND2_offH28I ) -#define INT_PEND2_mskH29I ( 0x1 << INT_PEND2_offH29I ) -#define INT_PEND2_mskH30I ( 0x1 << INT_PEND2_offH30I ) -#define INT_PEND2_mskH31I ( 0x1 << INT_PEND2_offH31I ) - -/****************************************************************************** - * ir28: INT_PRI2 (Interrupt Priority Register) - *****************************************************************************/ -#define INT_PRI_offH16PRI 0 /* Hardware Interrupt 16 Priority Level */ -#define INT_PRI_offH17PRI 2 /* Hardware Interrupt 17 Priority Level */ -#define INT_PRI_offH18PRI 4 /* Hardware Interrupt 18 Priority Level */ -#define INT_PRI_offH19PRI 6 /* Hardware Interrupt 19 Priority Level */ -#define INT_PRI_offH20PRI 8 /* Hardware Interrupt 20 Priority Level */ -#define INT_PRI_offH21PRI 10 /* Hardware Interrupt 21 Priority Level */ -#define INT_PRI_offH22PRI 12 /* Hardware Interrupt 22 Priority Level */ -#define INT_PRI_offH23PRI 14 /* Hardware Interrupt 23 Priority Level */ -#define INT_PRI_offH24PRI 16 /* Hardware Interrupt 24 Priority Level */ -#define INT_PRI_offH25PRI 18 /* Hardware Interrupt 25 Priority Level */ -#define INT_PRI_offH26PRI 20 /* Hardware Interrupt 26 Priority Level */ -#define INT_PRI_offH27PRI 22 /* Hardware Interrupt 27 Priority Level */ -#define INT_PRI_offH28PRI 24 /* Hardware Interrupt 28 Priority Level */ -#define INT_PRI_offH29PRI 26 /* Hardware Interrupt 29 Priority Level */ -#define INT_PRI_offH30PRI 28 /* Hardware Interrupt 30 Priority Level */ -#define INT_PRI_offH31PRI 30 /* Hardware Interrupt 31 Priority Level */ - -#define INT_PRI_mskH16PRI ( 0x3 << INT_PRI_offH16PRI ) -#define INT_PRI_mskH17PRI ( 0x3 << INT_PRI_offH17PRI ) -#define INT_PRI_mskH18PRI ( 0x3 << INT_PRI_offH18PRI ) -#define INT_PRI_mskH19PRI ( 0x3 << INT_PRI_offH19PRI ) -#define INT_PRI_mskH20PRI ( 0x3 << INT_PRI_offH20PRI ) -#define INT_PRI_mskH21PRI ( 0x3 << INT_PRI_offH21PRI ) -#define INT_PRI_mskH22PRI ( 0x3 << INT_PRI_offH22PRI ) -#define INT_PRI_mskH23PRI ( 0x3 << INT_PRI_offH23PRI ) -#define INT_PRI_mskH24PRI ( 0x3 << INT_PRI_offH24PRI ) -#define INT_PRI_mskH25PRI ( 0x3 << INT_PRI_offH25PRI ) -#define INT_PRI_mskH26PRI ( 0x3 << INT_PRI_offH26PRI ) -#define INT_PRI_mskH27PRI ( 0x3 << INT_PRI_offH27PRI ) -#define INT_PRI_mskH28PRI ( 0x3 << INT_PRI_offH28PRI ) -#define INT_PRI_mskH29PRI ( 0x3 << INT_PRI_offH29PRI ) -#define INT_PRI_mskH30PRI ( 0x3 << INT_PRI_offH30PRI ) -#define INT_PRI_mskH31PRI ( 0x3 << INT_PRI_offH31PRI ) - -/****************************************************************************** - * ir29: INT_TRIGGER (Interrupt Trigger Type Register) - *****************************************************************************/ -#define INT_TRIGGER_offH0TRIG 0 /* Hardware Interrupt 0 Trigger Type bit */ -#define INT_TRIGGER_offH1TRIG 1 /* Hardware Interrupt 1 Trigger Type bit */ -#define INT_TRIGGER_offH2TRIG 2 /* Hardware Interrupt 2 Trigger Type bit */ -#define INT_TRIGGER_offH3TRIG 3 /* Hardware Interrupt 3 Trigger Type bit */ -#define INT_TRIGGER_offH4TRIG 4 /* Hardware Interrupt 4 Trigger Type bit */ -#define INT_TRIGGER_offH5TRIG 5 /* Hardware Interrupt 5 Trigger Type bit */ -#define INT_TRIGGER_offH6TRIG 6 /* Hardware Interrupt 6 Trigger Type bit */ -#define INT_TRIGGER_offH7TRIG 7 /* Hardware Interrupt 7 Trigger Type bit */ -#define INT_TRIGGER_offH8TRIG 8 /* Hardware Interrupt 8 Trigger Type bit */ -#define INT_TRIGGER_offH9TRIG 9 /* Hardware Interrupt 9 Trigger Type bit */ -#define INT_TRIGGER_offH10TRIG 10 /* Hardware Interrupt 10 Trigger Type bit */ -#define INT_TRIGGER_offH11TRIG 11 /* Hardware Interrupt 11 Trigger Type bit */ -#define INT_TRIGGER_offH12TRIG 12 /* Hardware Interrupt 12 Trigger Type bit */ -#define INT_TRIGGER_offH13TRIG 13 /* Hardware Interrupt 13 Trigger Type bit */ -#define INT_TRIGGER_offH14TRIG 14 /* Hardware Interrupt 14 Trigger Type bit */ -#define INT_TRIGGER_offH15TRIG 15 /* Hardware Interrupt 15 Trigger Type bit */ -#define INT_TRIGGER_offH16TRIG 16 /* Hardware Interrupt 16 Trigger Type bit */ -#define INT_TRIGGER_offH17TRIG 17 /* Hardware Interrupt 17 Trigger Type bit */ -#define INT_TRIGGER_offH18TRIG 18 /* Hardware Interrupt 18 Trigger Type bit */ -#define INT_TRIGGER_offH19TRIG 19 /* Hardware Interrupt 19 Trigger Type bit */ -#define INT_TRIGGER_offH20TRIG 20 /* Hardware Interrupt 20 Trigger Type bit */ -#define INT_TRIGGER_offH21TRIG 21 /* Hardware Interrupt 21 Trigger Type bit */ -#define INT_TRIGGER_offH22TRIG 22 /* Hardware Interrupt 22 Trigger Type bit */ -#define INT_TRIGGER_offH23TRIG 23 /* Hardware Interrupt 23 Trigger Type bit */ -#define INT_TRIGGER_offH24TRIG 24 /* Hardware Interrupt 24 Trigger Type bit */ -#define INT_TRIGGER_offH25TRIG 25 /* Hardware Interrupt 25 Trigger Type bit */ -#define INT_TRIGGER_offH26TRIG 26 /* Hardware Interrupt 26 Trigger Type bit */ -#define INT_TRIGGER_offH27TRIG 27 /* Hardware Interrupt 27 Trigger Type bit */ -#define INT_TRIGGER_offH28TRIG 28 /* Hardware Interrupt 28 Trigger Type bit */ -#define INT_TRIGGER_offH29TRIG 29 /* Hardware Interrupt 29 Trigger Type bit */ -#define INT_TRIGGER_offH30TRIG 30 /* Hardware Interrupt 30 Trigger Type bit */ -#define INT_TRIGGER_offH31TRIG 31 /* Hardware Interrupt 31 Trigger Type bit */ - -#define INT_TRIGGER_mskH0TRIG ( 0x1 << INT_TRIGGER_offH0TRIG ) -#define INT_TRIGGER_mskH1TRIG ( 0x1 << INT_TRIGGER_offH1TRIG ) -#define INT_TRIGGER_mskH2TRIG ( 0x1 << INT_TRIGGER_offH2TRIG ) -#define INT_TRIGGER_mskH3TRIG ( 0x1 << INT_TRIGGER_offH3TRIG ) -#define INT_TRIGGER_mskH4TRIG ( 0x1 << INT_TRIGGER_offH4TRIG ) -#define INT_TRIGGER_mskH5TRIG ( 0x1 << INT_TRIGGER_offH5TRIG ) -#define INT_TRIGGER_mskH6TRIG ( 0x1 << INT_TRIGGER_offH6TRIG ) -#define INT_TRIGGER_mskH7TRIG ( 0x1 << INT_TRIGGER_offH7TRIG ) -#define INT_TRIGGER_mskH8TRIG ( 0x1 << INT_TRIGGER_offH8TRIG ) -#define INT_TRIGGER_mskH9TRIG ( 0x1 << INT_TRIGGER_offH9TRIG ) -#define INT_TRIGGER_mskH10TRIG ( 0x1 << INT_TRIGGER_offH10TRIG ) -#define INT_TRIGGER_mskH11TRIG ( 0x1 << INT_TRIGGER_offH11TRIG ) -#define INT_TRIGGER_mskH12TRIG ( 0x1 << INT_TRIGGER_offH12TRIG ) -#define INT_TRIGGER_mskH13TRIG ( 0x1 << INT_TRIGGER_offH13TRIG ) -#define INT_TRIGGER_mskH14TRIG ( 0x1 << INT_TRIGGER_offH14TRIG ) -#define INT_TRIGGER_mskH15TRIG ( 0x1 << INT_TRIGGER_offH15TRIG ) -#define INT_TRIGGER_mskH16TRIG ( 0x1 << INT_TRIGGER_offH16TRIG ) -#define INT_TRIGGER_mskH17TRIG ( 0x1 << INT_TRIGGER_offH17TRIG ) -#define INT_TRIGGER_mskH18TRIG ( 0x1 << INT_TRIGGER_offH18TRIG ) -#define INT_TRIGGER_mskH19TRIG ( 0x1 << INT_TRIGGER_offH19TRIG ) -#define INT_TRIGGER_mskH20TRIG ( 0x1 << INT_TRIGGER_offH20TRIG ) -#define INT_TRIGGER_mskH21TRIG ( 0x1 << INT_TRIGGER_offH21TRIG ) -#define INT_TRIGGER_mskH22TRIG ( 0x1 << INT_TRIGGER_offH22TRIG ) -#define INT_TRIGGER_mskH23TRIG ( 0x1 << INT_TRIGGER_offH23TRIG ) -#define INT_TRIGGER_mskH24TRIG ( 0x1 << INT_TRIGGER_offH24TRIG ) -#define INT_TRIGGER_mskH25TRIG ( 0x1 << INT_TRIGGER_offH25TRIG ) -#define INT_TRIGGER_mskH26TRIG ( 0x1 << INT_TRIGGER_offH26TRIG ) -#define INT_TRIGGER_mskH27TRIG ( 0x1 << INT_TRIGGER_offH27TRIG ) -#define INT_TRIGGER_mskH28TRIG ( 0x1 << INT_TRIGGER_offH28TRIG ) -#define INT_TRIGGER_mskH29TRIG ( 0x1 << INT_TRIGGER_offH29TRIG ) -#define INT_TRIGGER_mskH30TRIG ( 0x1 << INT_TRIGGER_offH30TRIG ) -#define INT_TRIGGER_mskH31TRIG ( 0x1 << INT_TRIGGER_offH31TRIG ) - -/****************************************************************************** - * mr0: MMU_CTL (MMU Control Register) - *****************************************************************************/ -#define MMU_CTL_offD 0 /* Default minimum page size */ -#define MMU_CTL_offNTC0 1 /* Non-Translated Cachebility of partition 0 */ -#define MMU_CTL_offNTC1 3 /* Non-Translated Cachebility of partition 1 */ -#define MMU_CTL_offNTC2 5 /* Non-Translated Cachebility of partition 2 */ -#define MMU_CTL_offNTC3 7 /* Non-Translated Cachebility of partition 3 */ -#define MMU_CTL_offTBALCK 9 /* TLB all-lock resolution scheme */ -#define MMU_CTL_offMPZIU 10 /* Multiple Page Size In Use bit */ -#define MMU_CTL_offNTM0 11 /* Non-Translated VA to PA of partition 0 */ -#define MMU_CTL_offNTM1 13 /* Non-Translated VA to PA of partition 1 */ -#define MMU_CTL_offNTM2 15 /* Non-Translated VA to PA of partition 2 */ -#define MMU_CTL_offNTM3 17 /* Non-Translated VA to PA of partition 3 */ -#define MMU_CTL_offDREE 19 /* Device register endian control enable */ -/* bit 20:31 reserved */ - -#define MMU_CTL_mskD ( 0x1 << MMU_CTL_offD ) -#define MMU_CTL_mskNTC0 ( 0x3 << MMU_CTL_offNTC0 ) -#define MMU_CTL_mskNTC1 ( 0x3 << MMU_CTL_offNTC1 ) -#define MMU_CTL_mskNTC2 ( 0x3 << MMU_CTL_offNTC2 ) -#define MMU_CTL_mskNTC3 ( 0x3 << MMU_CTL_offNTC3 ) -#define MMU_CTL_mskTBALCK ( 0x1 << MMU_CTL_offTBALCK ) -#define MMU_CTL_mskMPZIU ( 0x1 << MMU_CTL_offMPZIU ) -#define MMU_CTL_mskNTM0 ( 0x3 << MMU_CTL_offNTM0 ) -#define MMU_CTL_mskNTM1 ( 0x3 << MMU_CTL_offNTM1 ) -#define MMU_CTL_mskNTM2 ( 0x3 << MMU_CTL_offNTM2 ) -#define MMU_CTL_mskNTM3 ( 0x3 << MMU_CTL_offNTM3 ) -#define MMU_CTL_mskDREE ( 0x1 << MMU_CTL_offDREE ) - -/****************************************************************************** - * mr1: L1_PPTB (L1 Physical Page Table Base Register) - *****************************************************************************/ -#define L1_PPTB_offNV 0 /* Enable Hardware Page Table Walker (HPTWK) */ -/* bit 1:11 reserved */ -#define L1_PPTB_offBASE 12 /* First level physical page table base address */ - -#define L1_PPTB_mskNV ( 0x1 << L1_PPTB_offNV ) -#define L1_PPTB_mskBASE ( 0xFFFFF << L1_PPTB_offBASE ) - -/****************************************************************************** - * mr2: TLB_VPN (TLB Access VPN Register) - *****************************************************************************/ -/* bit 0:11 reserved */ -#define TLB_VPN_offVPN 12 /* Virtual Page Number */ - -#define TLB_VPN_mskVPN ( 0xFFFFF << TLB_VPN_offVPN ) - -/****************************************************************************** - * mr3: TLB_DATA (TLB Access Data Register) - *****************************************************************************/ -#define TLB_DATA_offV 0 /* PTE is valid and present */ -#define TLB_DATA_offM 1 /* Page read/write access privilege */ -#define TLB_DATA_offD 4 /* Dirty bit */ -#define TLB_DATA_offX 5 /* Executable bit */ -#define TLB_DATA_offA 6 /* Access bit */ -#define TLB_DATA_offG 7 /* Global page (shared across contexts) */ -#define TLB_DATA_offC 8 /* Cacheability atribute */ -/* bit 11:11 reserved */ -#define TLB_DATA_offPPN 12 /* Phisical Page Number */ - -#define TLB_DATA_mskV ( 0x1 << TLB_DATA_offV ) -#define TLB_DATA_mskM ( 0x7 << TLB_DATA_offM ) -#define TLB_DATA_mskD ( 0x1 << TLB_DATA_offD ) -#define TLB_DATA_mskX ( 0x1 << TLB_DATA_offX ) -#define TLB_DATA_mskA ( 0x1 << TLB_DATA_offA ) -#define TLB_DATA_mskG ( 0x1 << TLB_DATA_offG ) -#define TLB_DATA_mskC ( 0x7 << TLB_DATA_offC ) -#define TLB_DATA_mskPPN ( 0xFFFFF << TLB_DATA_offPPN ) - -/****************************************************************************** - * mr4: TLB_MISC (TLB Access Misc Register) - *****************************************************************************/ -#define TLB_MISC_offACC_PSZ 0 /* Page size of a PTE entry */ -#define TLB_MISC_offCID 4 /* Context id */ -/* bit 13:31 reserved */ - -#define TLB_MISC_mskACC_PSZ ( 0xF << TLB_MISC_offACC_PSZ ) -#define TLB_MISC_mskCID ( 0x1FF << TLB_MISC_offCID ) - -/****************************************************************************** - * mr5: VLPT_IDX (Virtual Linear Page Table Index Register) - *****************************************************************************/ -#define VLPT_IDX_offZERO 0 /* Always 0 */ -#define VLPT_IDX_offEVPN 2 /* Exception Virtual Page Number */ -#define VLPT_IDX_offVLPTB 22 /* Base VA of VLPT */ - -#define VLPT_IDX_mskZERO ( 0x3 << VLPT_IDX_offZERO ) -#define VLPT_IDX_mskEVPN ( 0xFFFFF << VLPT_IDX_offEVPN ) -#define VLPT_IDX_mskVLPTB ( 0x3FF << VLPT_IDX_offVLPTB ) - -/****************************************************************************** - * mr6: ILMB (Instruction Local Memory Base Register) - *****************************************************************************/ -#define ILMB_offIEN 0 /* Enable ILM */ -#define ILMB_offILMSZ 1 /* Size of ILM */ -/* bit 5:19 reserved */ -#define ILMB_offIBPA 10 /* Base PA of ILM */ - -#define ILMB_mskIEN ( 0x1 << ILMB_offIEN ) -#define ILMB_mskILMSZ ( 0xF << ILMB_offILMSZ ) -#define ILMB_mskIBPA ( 0xFFF << ILMB_offIBPA ) - -/****************************************************************************** - * mr7: DLMB (Data Local Memory Base Register) - *****************************************************************************/ -#define DLMB_offDEN 0 /* Enable DLM */ -#define DLMB_offDLMSZ 1 /* Size of DLM */ -#define DLMB_offDBM 5 /* Enable Double-Buffer Mode for DLM */ -#define DLMB_offDBB 6 /* Double-buffer bank which can be accessed by the processor */ -/* bit 7:19 reserved */ -#define DLMB_offDBPA 10 /* Base PA of DLM */ - -#define DLMB_mskDEN ( 0x1 << DLMB_offDEN ) -#define DLMB_mskDLMSZ ( 0xF << DLMB_offDLMSZ ) -#define DLMB_mskDBM ( 0x1 << DLMB_offDBM ) -#define DLMB_mskDBB ( 0x1 << DLMB_offDBB ) -#define DLMB_mskDBPA ( 0xFFF << DLMB_offDBPA ) - -/****************************************************************************** - * mr8: CACHE_CTL (Cache Control Register) - *****************************************************************************/ -#define CACHE_CTL_offIC_EN 0 /* Enable I-cache */ -#define CACHE_CTL_offDC_EN 1 /* Enable D-cache */ -#define CACHE_CTL_offICALCK 2 /* I-cache all-lock resolution scheme */ -#define CACHE_CTL_offDCALCK 3 /* D-cache all-lock resolution scheme */ -#define CACHE_CTL_offDCCWF 4 /* Enable D-cache Critical Word Forwarding */ -#define CACHE_CTL_offDCPMW 5 /* Enable D-cache concurrent miss and write-back processing */ -/* bit 6:31 reserved */ - -#define CACHE_CTL_mskIC_EN ( 0x1 << CACHE_CTL_offIC_EN ) -#define CACHE_CTL_mskDC_EN ( 0x1 << CACHE_CTL_offDC_EN ) -#define CACHE_CTL_mskICALCK ( 0x1 << CACHE_CTL_offICALCK ) -#define CACHE_CTL_mskDCALCK ( 0x1 << CACHE_CTL_offDCALCK ) -#define CACHE_CTL_mskDCCWF ( 0x1 << CACHE_CTL_offDCCWF ) -#define CACHE_CTL_mskDCPMW ( 0x1 << CACHE_CTL_offDCPMW ) - -/****************************************************************************** - * mr9: HSMP_SADDR (High Speed Memory Port Starting Address) - *****************************************************************************/ -#define HSMP_SADDR_offEN 0 /* Enable control bit for the High Speed Memory port */ -#define HSMP_SADDR_offRANGE 1 /* Denote the address range (only defined in HSMP v2 ) */ -/* bit 13:19 reserved */ - -#define HSMP_SADDR_offSADJ1DR 20 /* Starting base PA of the High Speed Memory Port region */ - -#define HSMP_SADDR_mskEN ( 0x1 << HSMP_SADDR_offEN ) -#define HSMP_SADDR_mskRANGE ( 0xFFF << HSMP_SADDR_offRANGE ) -#define HSMP_SADDR_mskSADDR ( 0xFFF << HSMP_SADDR_offSADDR ) - -/****************************************************************************** - * mr10: HSMP_EADDR (High Speed Memory Port Ending Address) - *****************************************************************************/ -/* bit 0:19 reserved */ -#define HSMP_EADDR_offEADDR 20 - -#define HSMP_EADDR_mskEADDR ( 0xFFF << HSMP_EADDR_offEADDR ) - -/****************************************************************************** - * dr0+(n*5): BPCn (n=0-7) (Breakpoint Control Register) - *****************************************************************************/ -#define BPC_offWP 0 /* Configuration of BPAn */ -#define BPC_offEL 1 /* Enable BPAn */ -#define BPC_offS 2 /* Data address comparison for a store instruction */ -#define BPC_offP 3 /* Compared data address is PA */ -#define BPC_offC 4 /* CID value is compared with the BPCIDn register */ -#define BPC_offBE0 5 /* Enable byte mask for the comparison with register */ -#define BPC_offBE1 6 /* Enable byte mask for the comparison with register */ -#define BPC_offBE2 7 /* Enable byte mask for the comparison with register */ -#define BPC_offBE3 8 /* Enable byte mask for the comparison with register */ -#define BPC_offT 9 /* Enable breakpoint Embedded Tracer triggering operation */ - -#define BPC_mskWP ( 0x1 << BPC_offWP ) -#define BPC_mskEL ( 0x1 << BPC_offEL ) -#define BPC_mskS ( 0x1 << BPC_offS ) -#define BPC_mskP ( 0x1 << BPC_offP ) -#define BPC_mskC ( 0x1 << BPC_offC ) -#define BPC_mskBE0 ( 0x1 << BPC_offBE0 ) -#define BPC_mskBE1 ( 0x1 << BPC_offBE1 ) -#define BPC_mskBE2 ( 0x1 << BPC_offBE2 ) -#define BPC_mskBE3 ( 0x1 << BPC_offBE3 ) -#define BPC_mskT ( 0x1 << BPC_offT ) - -/****************************************************************************** - * dr1+(n*5): BPAn (n=0-7) (Breakpoint Address Register) - *****************************************************************************/ - - /* These registers contain break point address */ - -/****************************************************************************** - * dr2+(n*5): BPAMn (n=0-7) (Breakpoint Address Mask Register) - *****************************************************************************/ - - /* These registerd contain the address comparison mask for the BPAn register */ - -/****************************************************************************** - * dr3+(n*5): BPVn (n=0-7) Breakpoint Data Value Register - *****************************************************************************/ - - /* The BPVn register contains the data value that will be compared with the - * incoming load/store data value */ - -/****************************************************************************** - * dr4+(n*5): BPCIDn (n=0-7) (Breakpoint Context ID Register) - *****************************************************************************/ -#define BPCID_offCID 0 /* CID that will be compared with a process's CID */ -/* bit 9:31 reserved */ - -#define BPCID_mskCID ( 0x1FF << BPCID_offCID ) - -/****************************************************************************** - * dr40: EDM_CFG (EDM Configuration Register) - *****************************************************************************/ -#define EDM_CFG_offBC 0 /* Number of hardware breakpoint sets implemented */ -#define EDM_CFG_offDIMU 3 /* Debug Instruction Memory Unit exists */ -/* bit 4:15 reserved */ -#define EDM_CFG_offVER 16 /* EDM version */ - -#define EDM_CFG_mskBC ( 0x7 << EDM_CFG_offBC ) -#define EDM_CFG_mskDIMU ( 0x1 << EDM_CFG_offDIMU ) -#define EDM_CFG_mskVER ( 0xFFFF << EDM_CFG_offVER ) - -/****************************************************************************** - * dr41: EDMSW (EDM Status Word) - *****************************************************************************/ -#define EDMSW_offWV 0 /* Write Valid */ -#define EDMSW_offRV 1 /* Read Valid */ -#define EDMSW_offDE 2 /* Debug exception has occurred for this core */ -/* bit 3:31 reserved */ - -#define EDMSW_mskWV ( 0x1 << EDMSW_offWV ) -#define EDMSW_mskRV ( 0x1 << EDMSW_offRV ) -#define EDMSW_mskDE ( 0x1 << EDMSW_offDE ) - -/****************************************************************************** - * dr42: EDM_CTL (EDM Control Register) - *****************************************************************************/ -/* bit 0:30 reserved */ -#define EDM_CTL_offDEH_SEL 31 /* Controls where debug exception is directed to */ - -#define EDM_CTL_mskDEH_SEL ( 0x1 << EDM_CTL_offDEH_SEL ) - -/****************************************************************************** - * dr43: EDM_DTR (EDM Data Transfer Register) - *****************************************************************************/ - - /* This is used to exchange data between the embedded EDM logic - * and the processor core */ - -/****************************************************************************** - * dr44: BPMTC (Breakpoint Match Trigger Counter Register) - *****************************************************************************/ -#define BPMTC_offBPMTC 0 /* Breakpoint match trigger counter value */ -/* bit 16:31 reserved */ - -#define BPMTC_mskBPMTC ( 0xFFFF << BPMTC_offBPMTC ) - -/****************************************************************************** - * dr45: DIMBR (Debug Instruction Memory Base Register) - *****************************************************************************/ -/* bit 0:11 reserved */ -#define DIMBR_offDIMB 12 /* Base address of the Debug Instruction Memory (DIM)*/ -#define DIMBR_mskDIMB ( 0xFFFFF << DIMBR_offDIMB ) - -/****************************************************************************** - * dr46: TECR0(Trigger Event Control register 0) - * dr47: TECR1 (Trigger Event Control register 1) - *****************************************************************************/ -#define TECR_offBP 0 /* Controld which BP is used as a trigger source */ -#define TECR_offNMI 8 /* Use NMI as a trigger source */ -#define TECR_offHWINT 9 /* Corresponding interrupt is used as a trigger source */ -#define TECR_offEVIC 15 /* Enable HWINT as a trigger source in EVIC mode */ -#define TECR_offSYS 16 /* Enable SYSCALL instruction as a trigger source */ -#define TECR_offDBG 17 /* Enable debug exception as a trigger source */ -#define TECR_offMRE 18 /* Enable MMU related exception as a trigger source */ -#define TECR_offE 19 /* An exception is used as a trigger source */ -/* bit 20:30 reserved */ -#define TECR_offL 31 /* Link/Cascade TECR0 trigger event to TECR1 trigger event */ - -#define TECR_mskBP ( 0xFF << TECR_offBP ) -#define TECR_mskNMI ( 0x1 << TECR_offBNMI ) -#define TECR_mskHWINT ( 0x3F << TECR_offBHWINT ) -#define TECR_mskEVIC ( 0x1 << TECR_offBEVIC ) -#define TECR_mskSYS ( 0x1 << TECR_offBSYS ) -#define TECR_mskDBG ( 0x1 << TECR_offBDBG ) -#define TECR_mskMRE ( 0x1 << TECR_offBMRE ) -#define TECR_mskE ( 0x1 << TECR_offE ) -#define TECR_mskL ( 0x1 << TECR_offL ) - -/****************************************************************************** - * hspr0: HSP_CTL (HW Stack Protection Control Register) - *****************************************************************************/ -#define HSP_CTL_offHSP_EN 0 /* Enable bit for the stack protection and recording mechanism */ -#define HSP_CTL_offSCHM 1 /* Operating scheme of the stack protection and recording */ -#define HSP_CTL_offSU 2 /* Enable the SP protection and recording in the super-user mode */ -#define HSP_CTL_offU 3 /* Enable the SP protection and recording in the user mode */ -#define HSP_CTL_offSPL 4 /* (Secure Core Only) the enabled Security Privilege Level */ -/* bit 7:31 reserved */ - -#define HSP_CTL_mskHSP_EN ( 0x1 << HSP_CTL_offHSP_EN ) -#define HSP_CTL_mskSCHM ( 0x1 << HSP_CTL_offSCHM ) -#define HSP_CTL_mskSU ( 0x1 << HSP_CTL_offSU ) -#define HSP_CTL_mskU ( 0x1 << HSP_CTL_offU ) -#define HSP_CTL_mskSPL ( 0x7 << HSP_CTL_offSPL ) - -/****************************************************************************** - * hspr1: SP_BOUND (SP Bound Register) - * hspr2: SP_BOUND_PRIV (Shadowed Privileged SP Bound Register) - *****************************************************************************/ - - /* These registers contains the stack overflow bound */ - -/****************************************************************************** - * pfr0-2: PFMC0-2 (Performance Counter Register 0-2) - *****************************************************************************/ - - /* These registers contains performance event count */ - -/****************************************************************************** - * pfr3: PFM_CTL (Performance Counter Control Register) - *****************************************************************************/ -#define PFM_CTL_offEN0 0 /* Enable PFMC0 */ -#define PFM_CTL_offEN1 1 /* Enable PFMC1 */ -#define PFM_CTL_offEN2 2 /* Enable PFMC2 */ -#define PFM_CTL_offIE0 3 /* Enable interrupt for PFMC0 */ -#define PFM_CTL_offIE1 4 /* Enable interrupt for PFMC1 */ -#define PFM_CTL_offIE2 5 /* Enable interrupt for PFMC2 */ -#define PFM_CTL_offOVF0 6 /* Overflow bit of PFMC0 */ -#define PFM_CTL_offOVF1 7 /* Overflow bit of PFMC1 */ -#define PFM_CTL_offOVF2 8 /* Overflow bit of PFMC2 */ -#define PFM_CTL_offKS0 9 /* Enable superuser mode event counting for PFMC0 */ -#define PFM_CTL_offKS1 10 /* Enable superuser mode event counting for PFMC1 */ -#define PFM_CTL_offKS2 11 /* Enable superuser mode event counting for PFMC2 */ -#define PFM_CTL_offKU0 12 /* Enable user mode event counting for PFMC0 */ -#define PFM_CTL_offKU1 13 /* Enable user mode event counting for PFMC1 */ -#define PFM_CTL_offKU2 14 /* Enable user mode event counting for PFMC2 */ -#define PFM_CTL_offSEL0 15 /* The event selection for PFMC0 */ -#define PFM_CTL_offSEL1 16 /* The event selection for PFMC1 */ -#define PFM_CTL_offSEL2 22 /* The event selection for PFMC2 */ -/* bit 28:30 reserved */ -#define PFM_CTL_offMIN_CFG 31 /* Minimum Configuration */ - -#define PFM_CTL_mskEN0 ( 0x01 << PFM_CTL_offEN0 ) -#define PFM_CTL_mskEN1 ( 0x01 << PFM_CTL_offEN1 ) -#define PFM_CTL_mskEN2 ( 0x01 << PFM_CTL_offEN2 ) -#define PFM_CTL_mskIE0 ( 0x01 << PFM_CTL_offIE0 ) -#define PFM_CTL_mskIE1 ( 0x01 << PFM_CTL_offIE1 ) -#define PFM_CTL_mskIE2 ( 0x01 << PFM_CTL_offIE2 ) -#define PFM_CTL_mskOVF0 ( 0x01 << PFM_CTL_offOVF0 ) -#define PFM_CTL_mskOVF1 ( 0x01 << PFM_CTL_offOVF1 ) -#define PFM_CTL_mskOVF2 ( 0x01 << PFM_CTL_offOVF2 ) -#define PFM_CTL_mskKS0 ( 0x01 << PFM_CTL_offKS0 ) -#define PFM_CTL_mskKS1 ( 0x01 << PFM_CTL_offKS1 ) -#define PFM_CTL_mskKS2 ( 0x01 << PFM_CTL_offKS2 ) -#define PFM_CTL_mskKU0 ( 0x01 << PFM_CTL_offKU0 ) -#define PFM_CTL_mskKU1 ( 0x01 << PFM_CTL_offKU1 ) -#define PFM_CTL_mskKU2 ( 0x01 << PFM_CTL_offKU2 ) -#define PFM_CTL_mskSEL0 ( 0x01 << PFM_CTL_offSEL0 ) -#define PFM_CTL_mskSEL1 ( 0x3F << PFM_CTL_offSEL1 ) -#define PFM_CTL_mskSEL2 ( 0x3F << PFM_CTL_offSEL2 ) -#define PFM_CTL_mskMIN_CFG ( 0x01 << PFM_CTL_offMIN_CFG ) - -/****************************************************************************** - * pfr4: PFT_CTL (Performance Throttling Control Register) - *****************************************************************************/ -/* bit 0:3 reserved */ -#define PFT_CTL_offT_LEVEL 4 /* Throttling Level */ -#define PFT_CTL_offFAST_INT 8 /* Fast interrupt response */ -/* bit 9:31 reserved */ - -#define PFT_CTL_mskT_LEVEL ( 0x0F << PFT_CTL_offT_LEVEL ) -#define PFT_CTL_mskFAST_INT ( 0x01 << PFT_CTL_offFAST_INT ) - -/****************************************************************************** - * idr0: SDZ_CTL (Structure Downsizing Control Register) - *****************************************************************************/ -#define SDZ_CTL_offICDZ 0 /* I-cache downsizing control */ -#define SDZ_CTL_offDCDZ 3 /* D-cache downsizing control */ -#define SDZ_CTL_offMTBDZ 6 /* MTLB downsizing control */ -#define SDZ_CTL_offBTBDZ 9 /* Branch Target Table downsizing control */ -/* bit 12:31 reserved */ -#define SDZ_CTL_mskICDZ ( 0x07 << SDZ_CTL_offICDZ ) -#define SDZ_CTL_mskDCDZ ( 0x07 << SDZ_CTL_offDCDZ ) -#define SDZ_CTL_mskMTBDZ ( 0x07 << SDZ_CTL_offMTBDZ ) -#define SDZ_CTL_mskBTBDZ ( 0x07 << SDZ_CTL_offBTBDZ ) - -/****************************************************************************** - * idr1: MISC_CTL (Miscellaneous Control Register) - *****************************************************************************/ -#define MISC_CTL_offBTB 0 /* Disable Branch Target Buffer */ -#define MISC_CTL_offRTP 1 /* Disable Return Target Predictor */ -#define MISC_CTL_offPTEEPF 2 /* Disable HPTWK L2 PTE pefetch */ -#define MISC_CTL_offTCM 3 /* Disable Two Cycle Multiplication */ -#define MISC_CTL_offSP_SHADOW_EN 4 /* Enable control for shadow stack pointers */ -#define MISC_CTL_offLP_CACHE 5 /* Disable the Loop Cache */ -/* bit 6:6 reserved */ -#define MISC_CTL_offILMC_EN 7 /* Enable Instruction Local Memory Cache */ -#define MISC_CTL_offACE 8 /* Disable Andes Custom Extension */ -/* bit 9:31 reserved */ - -#define MISC_CTL_makBTB ( 0x1 << MISC_CTL_makBTB ) -#define MISC_CTL_makRTP ( 0x1 << MISC_CTL_makRTP ) -#define MISC_CTL_makPTEEPF ( 0x1 << MISC_CTL_makPTEEPF ) -#define MISC_CTL_mskTCM ( 0x1 << MISC_CTL_offTCM ) -#define MISC_CTL_mskSP_SHADOW_EN ( 0x1 << MISC_CTL_offSP_SHADOW_EN ) -#define MISC_CTL_mskLP_CACHE ( 0x1 << MISC_CTL_offLP_CACHE ) -#define MISC_CTL_mskILMC_EN ( 0x1 << MISC_CTL_offILMC_EN ) -#define MISC_CTL_mskACE ( 0x1 << MISC_CTL_offACE ) - -/****************************************************************************** - * racr0: PRUSR_ACC_CTL (Privileged Resource User Access Control Registers) - *****************************************************************************/ -#define PRUSR_ACC_CTL_offDMA_EN 0 /* Allow user mode access of DMA registers */ -#define PRUSR_ACC_CTL_offPFM_EN 1 /* Allow user mode access of PFM registers */ - -#define PRUSR_ACC_CTL_mskDMA_EN ( 0x1 << PRUSR_ACC_CTL_offDMA_EN ) -#define PRUSR_ACC_CTL_mskPFM_EN ( 0x1 << PRUSR_ACC_CTL_offPFM_EN ) - -/****************************************************************************** - * dmar0: DMA_CFG (DMA Configuration Register) - *****************************************************************************/ -#define DMA_CFG_offNCHN 0 /* The number of DMA channels implemented */ -#define DMA_CFG_offUNEA 2 /* Un-aligned External Address transfer feature */ -#define DMA_CFG_off2DET 3 /* 2-D Element Transfer feature */ -/* bit 4:15 reserved */ -#define DMA_CFG_offVER 16 /* DMA architecture and implementation version */ - -#define DMA_CFG_mskNCHN ( 0x3 << DMA_CFG_offNCHN ) -#define DMA_CFG_mskUNEA ( 0x1 << DMA_CFG_offUNEA ) -#define DMA_CFG_msk2DET ( 0x1 << DMA_CFG_off2DET ) -#define DMA_CFG_mskVER ( 0xFFFF << DMA_CFG_offVER ) - -/****************************************************************************** - * dmar1: DMA_GCSW (DMA Global Control and Status Word Register) - *****************************************************************************/ -#define DMA_GCSW_offC0STAT 0 /* DMA channel 0 state */ -#define DMA_GCSW_offC1STAT 3 /* DMA channel 1 state */ -/* bit 6:11 reserved */ -#define DMA_GCSW_offC0INT 12 /* DMA channel 0 generate interrupt */ -#define DMA_GCSW_offC1INT 13 /* DMA channel 1 generate interrupt */ -#define DMA_GCSW_offHCHAN 16 /* Head channel number */ -#define DMA_GCSW_offFSM 18 /* Fast-start mode field */ -#define DMA_GCSW_offSCMD 20 /* DMA Sub-Action Command used in the fast-start mode */ -/* bit 22:27 reserved */ -#define DMA_GCSW_offSDBE 28 /* Shadow DBM and DBB bits Enable control */ -#define DMA_GCSW_offDBM 29 /* Double-Buffer Mode enable control for the data local memory */ -#define DMA_GCSW_offDBB 30 /* Double-Buffer Bank */ -#define DMA_GCSW_offEN 31 /* Enable DMA engine */ - -#define DMA_GCSW_mskC0STAT ( 0x7 << DMA_GCSW_offC0STAT ) -#define DMA_GCSW_mskC1STAT ( 0x7 << DMA_GCSW_offC1STAT ) -#define DMA_GCSW_mskC0INT ( 0x1 << DMA_GCSW_offC0INT ) -#define DMA_GCSW_mskC1INT ( 0x1 << DMA_GCSW_offC1INT ) -#define DMA_GCSW_mskHCHAN ( 0x3 << DMA_GCSW_offHCHAN ) -#define DMA_GCSW_mskFSM ( 0x3 << DMA_GCSW_offFSM ) -#define DMA_GCSW_mskSCMD ( 0x3 << DMA_GCSW_offSCMD ) -#define DMA_GCSW_mskSDBE ( 0x1 << DMA_GCSW_offSDBE ) -#define DMA_GCSW_mskDBM ( 0x1 << DMA_GCSW_offDBM ) -#define DMA_GCSW_mskDBB ( 0x1 << DMA_GCSW_offDBB ) -#define DMA_GCSW_mskEN ( 0x1 << DMA_GCSW_offEN ) - -/****************************************************************************** - * dmar2: DMA_CHNSEL (DMA Channel Selection Register) - *****************************************************************************/ -#define DMA_CHNSEL_offCHAN 0 /* Selected channel number */ -/* bit 2:31 reserved */ - -#define DMA_CHNSEL_mskCHAN ( 0x3 << DMA_CHNSEL_offCHAN ) - -/****************************************************************************** - * dmar3: DMA_ACT (DMA Action Register) - *****************************************************************************/ -#define DMA_ACT_offACMD 0 /* DMA Action Command */ -#define DMA_ACT_offSCMD 2 /* DMA Sub-action Command */ -/* bit 4:31 reserved */ -#define DMA_ACT_mskACMD ( 0x3 << DMA_ACT_offACMD ) -#define DMA_ACT_mskSCMD ( 0x3 << DMA_ACT_offSCMD ) - -/****************************************************************************** - * dmar4: DMA_SETUP (DMA Setup Register) - *****************************************************************************/ -#define DMA_SETUP_offLM 0 /* Local Memory Selection */ -#define DMA_SETUP_offTDIR 1 /* Transfer Direction */ -#define DMA_SETUP_offTES 2 /* Transfer Element Size */ -#define DMA_SETUP_offESTR 4 /* External memory transfer Stride */ -#define DMA_SETUP_offCIE 16 /* Interrupt Enable on Completion */ -#define DMA_SETUP_offSIE 17 /* Interrupt Enable on explicit Stop */ -#define DMA_SETUP_offEIE 18 /* Interrupt Enable on Error */ -#define DMA_SETUP_offUE 19 /* Enable the Un-aligned External Address */ -#define DMA_SETUP_off2DE 20 /* Enable the 2-D External Transfer */ -#define DMA_SETUP_offCOA 21 /* Transfer Coalescable */ -/* bit 24:31 reserved */ - -#define DMA_SETUP_mskLM ( 0x1 << DMA_SETUP_offLM ) -#define DMA_SETUP_mskTDIR ( 0x1 << DMA_SETUP_offTDIR ) -#define DMA_SETUP_mskTES ( 0x3 << DMA_SETUP_offTES ) -#define DMA_SETUP_mskESTR ( 0xFFF << DMA_SETUP_offESTR ) -#define DMA_SETUP_mskCIE ( 0x1 << DMA_SETUP_offCIE ) -#define DMA_SETUP_mskSIE ( 0x1 << DMA_SETUP_offSIE ) -#define DMA_SETUP_mskEIE ( 0x1 << DMA_SETUP_offEIE ) -#define DMA_SETUP_mskUE ( 0x1 << DMA_SETUP_offUE ) -#define DMA_SETUP_msk2DE ( 0x1 << DMA_SETUP_off2DE ) -#define DMA_SETUP_mskCOA ( 0x7 << DMA_SETUP_offCOA ) - -/****************************************************************************** - * dmar5: DMA_ISADDR (DMA Internal Start Address Register) - *****************************************************************************/ -#define DMA_ISADDR_offISADDR 0 /* Internal Start Address */ -/* bit 20:31 reserved */ -#define DMA_ISADDR_mskISADDR ( 0xFFFFF << DMA_ISADDR_offISADDR ) - -/****************************************************************************** - * dmar6: DMA_ESADDR (DMA External Start Address Register) - *****************************************************************************/ - /* This register holds External Start Address */ - -/****************************************************************************** - * dmar7: DMA_TCNT (DMA Transfer Element Count Register) - *****************************************************************************/ -#define DMA_TCNT_offTCNT 0 /* DMA transfer element count */ -/* bit 18:31 reserved */ -#define DMA_TCNT_mskTCNT ( 0x7FFFFF << DMA_TCNT_offTCNT ) - -/****************************************************************************** - * dmar8: DMA_STATUS (DMA Status Register) - *****************************************************************************/ -#define DMA_STATUS_offSTAT 0 /* DMA channel state */ -#define DMA_STATUS_offSTUNA 3 /* Un-aligned error on External Stride value */ -#define DMA_STATUS_offDERR 4 /* DMA Transfer Disruption Error */ -#define DMA_STATUS_offEUNA 5 /* Un-aligned error on the External address */ -#define DMA_STATUS_offIUNA 6 /* Un-aligned error on the Internal address */ -#define DMA_STATUS_offIOOR 7 /* Out-Of-Range error on the Internal address */ -#define DMA_STATUS_offEBUS 8 /* Bus Error on an External DMA transfer */ -#define DMA_STATUS_offESUP 9 /* DMA setup error */ -/* bit 10:30 reserved */ -#define DMA_STATUS_offWE 31 /* Wait event */ - -#define DMA_STATUS_mskSTAT ( 0x7 << DMA_STATUS_offSTAT ) -#define DMA_STATUS_mskSTUNA ( 0x1 << DMDMA_STATUS_offSTUNA ) -#define DMA_STATUS_mskDERR ( 0x1 << DMDMA_STATUS_offDERR ) -#define DMA_STATUS_mskEUNA ( 0x1 << DMDMA_STATUS_offEUNA ) -#define DMA_STATUS_mskIUNA ( 0x1 << DMDMA_STATUS_offIUNA ) -#define DMA_STATUS_mskIOOR ( 0x1 << DMDMA_STATUS_offIOOR ) -#define DMA_STATUS_mskEBUS ( 0x1 << DMDMA_STATUS_offEBUS ) -#define DMA_STATUS_mskESUP ( 0x1 << DMDMA_STATUS_offESUP ) -#define DMA_STATUS_mskWE ( 0x1 << DMA_STATUS_offWE ) - -/****************************************************************************** - * dmar9: DMA_2DSET (DMA 2D Setup Register) - *****************************************************************************/ -#define DMA_2DSET_offWECNT 0 /* The Width Element Count for a 2-D region */ -#define DMA_2DSET_offHTSTR 16 /* The Height Stride for a 2-D region */ - -#define DMA_2DSET_mskHTSTR ( 0xFFFF << DMA_2DSET_offHTSTR ) -#define DMA_2DSET_mskWECNT ( 0xFFFF << DMA_2DSET_offWECNT ) - -/****************************************************************************** - * dmar10: DMA_2DSCTL (DMA 2D Startup Control Register) - *****************************************************************************/ -#define DMA_2DSCTL_offSTWECNT 0 /* Startup Width Element Count for a 2-D region */ -/* bit 16:31 reserved */ - -#define DMA_2DSCTL_mskSTWECNT ( 0xFFFF << DMA_2DSCTL_offSTWECNT ) - -/****************************************************************************** - * fpcsr: FPCSR (Floating-Point Control Status Register) - *****************************************************************************/ -#define FPCSR_offRM 0 -#define FPCSR_offIVO 2 -#define FPCSR_offDBZ 3 -#define FPCSR_offOVF 4 -#define FPCSR_offUDF 5 -#define FPCSR_offIEX 6 -#define FPCSR_offIVOE 7 -#define FPCSR_offDBZE 8 -#define FPCSR_offOVFE 9 -#define FPCSR_offUDFE 10 -#define FPCSR_offIEXE 11 -#define FPCSR_offDNZ 12 -#define FPCSR_offIVOT 13 -#define FPCSR_offDBZT 14 -#define FPCSR_offOVFT 15 -#define FPCSR_offUDFT 16 -#define FPCSR_offIEXT 17 -#define FPCSR_offDNIT 18 -#define FPCSR_offRIT 19 - -#define FPCSR_mskRM ( 0x3 << FPCSR_offRM ) -#define FPCSR_mskIVO ( 0x1 << FPCSR_offIVO ) -#define FPCSR_mskDBZ ( 0x1 << FPCSR_offDBZ ) -#define FPCSR_mskOVF ( 0x1 << FPCSR_offOVF ) -#define FPCSR_mskUDF ( 0x1 << FPCSR_offUDF ) -#define FPCSR_mskIEX ( 0x1 << FPCSR_offIEX ) -#define FPCSR_mskIVOE ( 0x1 << FPCSR_offIVOE ) -#define FPCSR_mskDBZE ( 0x1 << FPCSR_offDBZE ) -#define FPCSR_mskOVFE ( 0x1 << FPCSR_offOVFE ) -#define FPCSR_mskUDFE ( 0x1 << FPCSR_offUDFE ) -#define FPCSR_mskIEXE ( 0x1 << FPCSR_offIEXE ) -#define FPCSR_mskDNZ ( 0x1 << FPCSR_offDNZ ) -#define FPCSR_mskIVOT ( 0x1 << FPCSR_offIVOT ) -#define FPCSR_mskDBZT ( 0x1 << FPCSR_offDBZT ) -#define FPCSR_mskOVFT ( 0x1 << FPCSR_offOVFT ) -#define FPCSR_mskUDFT ( 0x1 << FPCSR_offUDFT ) -#define FPCSR_mskIEXT ( 0x1 << FPCSR_offIEXT ) -#define FPCSR_mskDNIT ( 0x1 << FPCSR_offDNIT ) -#define FPCSR_mskRIT ( 0x1 << FPCSR_offRIT ) - -/****************************************************************************** - * fpcfg: FPCFG (Floating-Point Configuration Register) - *****************************************************************************/ -#define FPCFG_offSP 0 -#define FPCFG_offDP 1 -#define FPCFG_offFREG 2 -#define FPCFG_offFMA 4 -/* bit 5:21 reserved */ -#define FPCFG_offIMVER 22 -#define FPCFG_offAVER 27 - -#define FPCFG_mskSP ( 0x1 << FPCFG_offSP ) -#define FPCFG_mskDP ( 0x1 << FPCFG_offDP ) -#define FPCFG_mskFREG ( 0x3 << FPCFG_offFREG ) -#define FPCFG_mskFMA ( 0x1 << FPCFG_offFMA ) -#define FPCFG_mskIMVER ( 0x1F << FPCFG_offIMVER ) -#define FPCFG_mskAVER ( 0x1F << FPCFG_offAVER ) - -/****************************************************************************** - * fucpr: FUCOP_CTL (FPU and Coprocessor Enable Control Register) - *****************************************************************************/ -#define FUCOP_CTL_offFPUEN 0 -#define FUCOP_CTL_offCP1EN 1 -#define FUCOP_CTL_offCP2EN 2 -#define FUCOP_CTL_offCP3EN 3 -/* bit 4:30 reserved */ -#define FUCOP_CTL_offAUEN 31 - -#define FUCOP_CTL_mskFPUEN ( 0x1 << FUCOP_CTL_offFPUEN ) -#define FUCOP_CTL_mskCP1EN ( 0x1 << FUCOP_CTL_offCP1EN ) -#define FUCOP_CTL_mskCP2EN ( 0x1 << FUCOP_CTL_offCP2EN ) -#define FUCOP_CTL_mskCP3EN ( 0x1 << FUCOP_CTL_offCP3EN ) -#define FUCOP_CTL_mskAUEN ( 0x1 << FUCOP_CTL_offAUEN ) - -#ifdef CONFIG_CACHE_L2 -/****************************************************************************** - * L2_CA_CONF (Cache architecture configuration) - *****************************************************************************/ -#define L2_CA_CONF_offL2CLSZ 8 -#define L2_CA_CONF_mskL2CLSZ (0x7 << L2_CA_CONF_offL2CLSZ) -//TODO finish this table - -/****************************************************************************** - * L2CC_SETUP (L2CC Setup register) - *****************************************************************************/ -#define L2CC_SETUP_offPART 0 -#define L2CC_SETUP_mskPART (0x3 << L2_CA_CONF_offPART) -#define L2CC_SETUP_offDDLATC 4 -#define L2CC_SETUP_mskDDLATC (0x3 << L2_CA_CONF_offDDLATC) -#define L2CC_SETUP_offTDLATC 8 -#define L2CC_SETUP_mskTDLATC (0x3 << L2_CA_CONF_offTDLATC) - -/****************************************************************************** - * L2CC_PROT (L2CC Protect register) - *****************************************************************************/ -#define L2CC_PROT_offMRWEN 31 -#define L2CC_PROT_mskMRWEN (0x1 << L2CC_PROT_offMRWEN) -//TODO finish this table -// -/****************************************************************************** - * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n) - *****************************************************************************/ -#define L2CC_CTRL_offEN 31 -#define L2CC_CTRL_mskEN (0x1 << L2CC_CTRL_offEN) - -/****************************************************************************** - * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n) - *****************************************************************************/ -#define L2_CCTL_STATUS_offCMD_COMP 31 -#define L2_CCTL_STATUS_mskCMD_COMP (0x1 << L2_CCTL_STATUS_offCMD_COMP) -//TODO finish this table - -#endif - -#endif /* __NDS32_DEFS_H__ */ diff --git a/bsp/AE210P/os_cpu_common.h b/bsp/AE210P/os_cpu_common.h deleted file mode 100644 index b010e0d64d..0000000000 --- a/bsp/AE210P/os_cpu_common.h +++ /dev/null @@ -1,426 +0,0 @@ -#include "nds32.h" - - .set regno, 0 -#ifdef __TARGET_IFC_EXT - .set regno, regno+1 -#endif -#ifdef __TARGET_ZOL_EXT - .set regno, regno+3 -#endif - - /* Descend PSW.INTL and enable PSW.AEN */ - .macro IntlDescend - mfsr $r1, $PSW -#ifdef __TARGET_ZOL_EXT - /* Also enable ZOL (PSW.AEN) */ - xori $r1, $r1, #((1 << 13) | (1 << 1)) -#else - addi $r1, $r1, #-2 -#endif - mtsr $r1, $PSW - .endm - - /* FPU registers */ - .macro SAVE_FPU_REGS_00 - fsdi.bi $fd3, [$sp], -8 - fsdi.bi $fd2, [$sp], -8 - fsdi.bi $fd1, [$sp], -8 - fsdi $fd0, [$sp+0] - .endm - - .macro SAVE_FPU_REGS_01 - fsdi.bi $fd7, [$sp], -8 - fsdi.bi $fd6, [$sp], -8 - fsdi.bi $fd5, [$sp], -8 - fsdi.bi $fd4, [$sp], -8 - SAVE_FPU_REGS_00 - .endm - - .macro SAVE_FPU_REGS_02 - fsdi.bi $fd15, [$sp], -8 - fsdi.bi $fd14, [$sp], -8 - fsdi.bi $fd13, [$sp], -8 - fsdi.bi $fd12, [$sp], -8 - fsdi.bi $fd11, [$sp], -8 - fsdi.bi $fd10, [$sp], -8 - fsdi.bi $fd9, [$sp], -8 - fsdi.bi $fd8, [$sp], -8 - SAVE_FPU_REGS_01 - .endm - - .macro SAVE_FPU_REGS_03 - fsdi.bi $fd31, [$sp], -8 - fsdi.bi $fd30, [$sp], -8 - fsdi.bi $fd29, [$sp], -8 - fsdi.bi $fd28, [$sp], -8 - fsdi.bi $fd27, [$sp], -8 - fsdi.bi $fd26, [$sp], -8 - fsdi.bi $fd25, [$sp], -8 - fsdi.bi $fd24, [$sp], -8 - fsdi.bi $fd23, [$sp], -8 - fsdi.bi $fd22, [$sp], -8 - fsdi.bi $fd21, [$sp], -8 - fsdi.bi $fd20, [$sp], -8 - fsdi.bi $fd19, [$sp], -8 - fsdi.bi $fd18, [$sp], -8 - fsdi.bi $fd17, [$sp], -8 - fsdi.bi $fd16, [$sp], -8 - SAVE_FPU_REGS_02 - .endm - - .macro push_fpu -#if defined(__NDS32_EXT_FPU_CONFIG_0__) - addi $sp, $sp, -8 - SAVE_FPU_REGS_00 -#elif defined(__NDS32_EXT_FPU_CONFIG_1__) - addi $sp, $sp, -8 - SAVE_FPU_REGS_01 -#elif defined(__NDS32_EXT_FPU_CONFIG_2__) - addi $sp, $sp, -8 - SAVE_FPU_REGS_02 -#elif defined(__NDS32_EXT_FPU_CONFIG_3__) - addi $sp, $sp, -8 - SAVE_FPU_REGS_03 -#else -#endif - .endm - - .macro RESTORE_FPU_REGS_00 - fldi.bi $fd0, [$sp], 8 - fldi.bi $fd1, [$sp], 8 - fldi.bi $fd2, [$sp], 8 - fldi.bi $fd3, [$sp], 8 - .endm - - .macro RESTORE_FPU_REGS_01 - RESTORE_FPU_REGS_00 - fldi.bi $fd4, [$sp], 8 - fldi.bi $fd5, [$sp], 8 - fldi.bi $fd6, [$sp], 8 - fldi.bi $fd7, [$sp], 8 - .endm - - .macro RESTORE_FPU_REGS_02 - RESTORE_FPU_REGS_01 - fldi.bi $fd8, [$sp], 8 - fldi.bi $fd9, [$sp], 8 - fldi.bi $fd10, [$sp], 8 - fldi.bi $fd11, [$sp], 8 - fldi.bi $fd12, [$sp], 8 - fldi.bi $fd13, [$sp], 8 - fldi.bi $fd14, [$sp], 8 - fldi.bi $fd15, [$sp], 8 - .endm - - .macro RESTORE_FPU_REGS_03 - RESTORE_FPU_REGS_02 - fldi.bi $fd16, [$sp], 8 - fldi.bi $fd17, [$sp], 8 - fldi.bi $fd18, [$sp], 8 - fldi.bi $fd19, [$sp], 8 - fldi.bi $fd20, [$sp], 8 - fldi.bi $fd21, [$sp], 8 - fldi.bi $fd22, [$sp], 8 - fldi.bi $fd23, [$sp], 8 - fldi.bi $fd24, [$sp], 8 - fldi.bi $fd25, [$sp], 8 - fldi.bi $fd26, [$sp], 8 - fldi.bi $fd27, [$sp], 8 - fldi.bi $fd28, [$sp], 8 - fldi.bi $fd29, [$sp], 8 - fldi.bi $fd30, [$sp], 8 - fldi.bi $fd31, [$sp], 8 - .endm - - .macro pop_fpu -#if defined(__NDS32_EXT_FPU_CONFIG_0__) - RESTORE_FPU_REGS_00 -#elif defined(__NDS32_EXT_FPU_CONFIG_1__) - RESTORE_FPU_REGS_01 -#elif defined(__NDS32_EXT_FPU_CONFIG_2__) - RESTORE_FPU_REGS_02 -#elif defined(__NDS32_EXT_FPU_CONFIG_3__) - RESTORE_FPU_REGS_03 -#else -#endif - .endm - - /* FPU Caller registers */ - .macro SAVE_FPU_CALLER_REGS_00 - addi $sp, $sp, -8 - fsdi.bi $fd2, [$sp], -8 - fsdi.bi $fd1, [$sp], -8 - fsdi $fd0, [$sp+0] - .endm - - .macro SAVE_FPU_CALLER_REGS_01 - SAVE_FPU_CALLER_REGS_00 - .endm - - .macro SAVE_FPU_CALLER_REGS_02 - addi $sp, $sp, -8 - fsdi.bi $fd15, [$sp], -8 - fsdi.bi $fd14, [$sp], -8 - fsdi.bi $fd13, [$sp], -8 - fsdi.bi $fd12, [$sp], -8 - fsdi.bi $fd11, [$sp], -8 - fsdi.bi $fd2, [$sp], -8 - fsdi.bi $fd1, [$sp], -8 - fsdi $fd0, [$sp+0] - .endm - - .macro SAVE_FPU_CALLER_REGS_03 - addi $sp, $sp, -8 - fsdi.bi $fd23, [$sp], -8 - fsdi.bi $fd22, [$sp], -8 - fsdi.bi $fd21, [$sp], -8 - fsdi.bi $fd20, [$sp], -8 - fsdi.bi $fd19, [$sp], -8 - fsdi.bi $fd18, [$sp], -8 - fsdi.bi $fd17, [$sp], -8 - fsdi.bi $fd16, [$sp], -8 - fsdi.bi $fd15, [$sp], -8 - fsdi.bi $fd14, [$sp], -8 - fsdi.bi $fd13, [$sp], -8 - fsdi.bi $fd12, [$sp], -8 - fsdi.bi $fd11, [$sp], -8 - fsdi.bi $fd2, [$sp], -8 - fsdi.bi $fd1, [$sp], -8 - fsdi $fd0, [$sp+0] - .endm - - .macro push_fpu_caller -#if defined(__NDS32_EXT_FPU_CONFIG_0__) - SAVE_FPU_CALLER_REGS_00 -#elif defined(__NDS32_EXT_FPU_CONFIG_1__) - SAVE_FPU_CALLER_REGS_01 -#elif defined(__NDS32_EXT_FPU_CONFIG_2__) - SAVE_FPU_CALLER_REGS_02 -#elif defined(__NDS32_EXT_FPU_CONFIG_3__) - SAVE_FPU_CALLER_REGS_03 -#else -#endif - .endm - - .macro RESTORE_FPU_CALLER_REGS_00 - fldi.bi $fd0, [$sp], 8 - fldi.bi $fd1, [$sp], 8 - fldi.bi $fd2, [$sp], 8 - .endm - - .macro RESTORE_FPU_CALLER_REGS_01 - RESTORE_FPU_CALLER_REGS_00 - .endm - - .macro RESTORE_FPU_CALLER_REGS_02 - fldi.bi $fd0, [$sp], 8 - fldi.bi $fd1, [$sp], 8 - fldi.bi $fd2, [$sp], 8 - fldi.bi $fd11, [$sp], 8 - fldi.bi $fd12, [$sp], 8 - fldi.bi $fd13, [$sp], 8 - fldi.bi $fd14, [$sp], 8 - fldi.bi $fd15, [$sp], 8 - .endm - - .macro RESTORE_FPU_CALLER_REGS_03 - fldi.bi $fd0, [$sp], 8 - fldi.bi $fd1, [$sp], 8 - fldi.bi $fd2, [$sp], 8 - fldi.bi $fd11, [$sp], 8 - fldi.bi $fd12, [$sp], 8 - fldi.bi $fd13, [$sp], 8 - fldi.bi $fd14, [$sp], 8 - fldi.bi $fd15, [$sp], 8 - fldi.bi $fd16, [$sp], 8 - fldi.bi $fd17, [$sp], 8 - fldi.bi $fd18, [$sp], 8 - fldi.bi $fd19, [$sp], 8 - fldi.bi $fd20, [$sp], 8 - fldi.bi $fd21, [$sp], 8 - fldi.bi $fd22, [$sp], 8 - fldi.bi $fd23, [$sp], 8 - .endm - - .macro pop_fpu_caller -#if defined(__NDS32_EXT_FPU_CONFIG_0__) - RESTORE_FPU_CALLER_REGS_00 -#elif defined(__NDS32_EXT_FPU_CONFIG_1__) - RESTORE_FPU_CALLER_REGS_01 -#elif defined(__NDS32_EXT_FPU_CONFIG_2__) - RESTORE_FPU_CALLER_REGS_02 -#elif defined(__NDS32_EXT_FPU_CONFIG_3__) - RESTORE_FPU_CALLER_REGS_03 -#else -#endif - .endm - - /* IFC system register */ - .macro MFUSR_IFC R0="$r1" - mfusr \R0, $IFC_LP - .endm - - .macro MTUSR_IFC R0="$r1" - mtusr \R0, $IFC_LP - .endm - - /* ZOL system registers */ - .macro MFUSR_ZOL R0="$r1", R1="$r2", R2="$r3" - mfusr \R0, $LB - mfusr \R1, $LE - mfusr \R2, $LC - .endm - - .macro MTUSR_ZOL R0="$r1", R1="$r2", R2="$r3" - mtusr \R0, $LB - mtusr \R1, $LE - mtusr \R2, $LC - .endm - - /* Context-switch save and restore routines */ - .macro SAVE_ALL - pushm $r6, $r30 - - mfsr $r1, $IPC - mfsr $r2, $IPSW - - .if (regno == 4) - MFUSR_ZOL "$r3","$r4","$r5" - MFUSR_IFC "$r6" - pushm $r0, $r6 /* $0 is dummy */ - .else - .if (regno == 3) - MFUSR_ZOL "$r3","$r4","$r5" - pushm $r1, $r5 - .else - .if (regno == 1) - MFUSR_IFC "$r3" - pushm $r1, $r3 - .else - pushm $r1, $r2 - .endif - .endif - .endif - - push_fpu - .endm - - .macro RESTORE_ALL - pop_fpu - setgie.d - dsb - - .if (regno == 4) - popm $r0, $r6 /* $0 is dummy */ - MTUSR_ZOL "$r3","$r4","$r5" - MTUSR_IFC "$r6" - .else - .if (regno == 3) - popm $r1, $r5 - MTUSR_ZOL "$r3","$r4","$r5" - .else - .if (regno == 1) - popm $r1, $r3 - MTUSR_IFC "$r3" - .else - popm $r1, $r2 - .endif - .endif - .endif - - mtsr $r1, $IPC - mtsr $r2, $IPSW - - popm $r6, $r30 - popm $r0, $r5 - .endm - - /* Nested IRQ save and restore routines*/ - .macro SAVE_CALLER - pushm $r15,$r30 /* full: 16 gpr, reduce: 4 gpr */ - - .if (regno == 4) - MFUSR_ZOL "$r1","$r2","$r3" - MFUSR_IFC "$r4" - pushm $r1, $r4 - - mfsr $r1, $IPC - mfsr $r2, $IPSW - pushm $r1, $r2 - .else - mfsr $r1, $IPC - mfsr $r2, $IPSW - .if (regno == 3) - MFUSR_ZOL "$r3","$r4","$r5" - pushm $r0, $r5 /* $0 is dummy */ - .else - .if (regno == 1) - MFUSR_IFC "$r3" - pushm $r0, $r3 /* $r0 is dummy */ - .else - pushm $r1, $r2 - .endif - .endif - .endif - - push_fpu_caller - .endm - - .macro RESTORE_CALLER - pop_fpu_caller - setgie.d - dsb - - .if (regno == 4) - popm $r1, $r2 - mtsr $r1, $IPC - mtsr $r2, $IPSW - - popm $r1, $r4 - MTUSR_ZOL "$r1","$r2","$r3" - MTUSR_IFC "$r4" - .else - .if (regno == 3) - popm $r0, $r5 /* $0 is dummy */ - MTUSR_ZOL "$r3","$r4","$r5" - .else - .if (regno == 1) - popm $r0, $r3 /* $0 is dummy */ - MTUSR_IFC "$r3" - .else - popm $r1, $r2 - .endif - .endif - mtsr $r1, $IPC - mtsr $r2, $IPSW - .endif - - popm $r15,$r30 /* full: 16 gpr, reduce: 4 gpr*/ - popm $r0, $r5 - .endm - - /* Non-Nested IRQ save and restore routines */ - .macro SAVE_CALLER_UNNESTED - pushm $r15,$r30 /* full: 16 gpr, reduce: 4 gpr */ - - .if (regno == 1) - MFUSR_IFC "$r1" - pushm $r0, $r1 /* $r0 is dummy */ - .endif - - push_fpu_caller - .endm - - .macro RESTORE_CALLER_UNNESTED - pop_fpu_caller - - .if (regno == 1) - setgie.d - dsb - popm $r0, $r1 /* $0 is dummy */ - MTUSR_IFC "$r1" - .endif - - popm $r15,$r30 /* full: 16 gpr, reduce: 4 gpr*/ - popm $r0, $r5 - .endm diff --git a/bsp/AE210P/os_except.c b/bsp/AE210P/os_except.c deleted file mode 100644 index 8d0b829e68..0000000000 --- a/bsp/AE210P/os_except.c +++ /dev/null @@ -1,54 +0,0 @@ -#include "hal.h" -#include "uart/uart.h" -#include "osc/osc.h" -#include "os_except.h" - -/* - ********************************************************************************************************* - * Register Exception Handlers - * - * Description : This function is called to register general exception handler. - * The total number of general exception is 16. - * - * Arguments : ipc - * - * Notes : - ********************************************************************************************************* - */ -inline void register_exception_handler(int genneral_except_num, void (*handler)(unsigned int ipc)) -{ - if (genneral_except_num >= 16) - { - puts("Non-exist general exception number.\n"); - while (1); - } - - General_Exception_Handler_Table[genneral_except_num] = handler; -} - -/* - ********************************************************************************************************* - * Exception Dispatcher - * - * Description : This function is called from exception handler to dispatch different - * exception handler according to register itype. - * - * Arguments : ipc - * - * Notes : - ********************************************************************************************************* - */ -void OS_CPU_EXCEPTION_Dispatcher(unsigned int ipc) -{ - /* Interrupt is still disabled at this point */ - /* get all needed system registers' values before re-enable interrupt */ - unsigned int itype = __nds32__mfsr (NDS32_SR_ITYPE); - unsigned int exception_num; - void (*pHandler)(unsigned int ipc); - - exception_num = itype & 0xf; - - pHandler = General_Exception_Handler_Table[exception_num]; - - pHandler(ipc); -} diff --git a/bsp/AE210P/os_except.h b/bsp/AE210P/os_except.h deleted file mode 100644 index 254a6dce51..0000000000 --- a/bsp/AE210P/os_except.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __OS_EXCEPT_H__ -#define __OS_EXCEPT_H__ - -/*********************************** - TYPES OF GENERAL EXCEPTION - ***********************************/ -#define GE_ALIGN_CHECK 0 -#define GE_RESERVED_INST 1 -#define GE_TRAP 2 -#define GE_ARITHMETIC 3 -#define GE_PRECISE_BUS_ERR 4 -#define GE_INPRECISE_BUS_ERR 5 -#define GE_COPROCESSOR 6 -#define GE_PRIVILEGE_INST 7 -#define GE_RESERVED_VALUE 8 -#define GE_NON_EXIST_LOCAL_MEM 9 -#define GE_MPZIU_CTRL 10 - -void *General_Exception_Handler_Table[16]; - -inline void register_exception_handler(int genneral_except_num, void (*handler)(unsigned int ipc)); - -#endif diff --git a/bsp/AE210P/reset.c b/bsp/AE210P/reset.c deleted file mode 100644 index b0c8b4dbc8..0000000000 --- a/bsp/AE210P/reset.c +++ /dev/null @@ -1,138 +0,0 @@ -#include "nds32_intrinsic.h" -#include "nds32.h" - -#ifndef VECTOR_BASE -#define VECTOR_BASE 0x00000000 -#endif - -#define PSW_MSK \ - (PSW_mskGIE | PSW_mskINTL | PSW_mskPOM | PSW_mskIFCON | PSW_mskCPL) -#define PSW_INIT \ - (0x0UL << PSW_offGIE \ - | 0x0UL << PSW_offINTL \ - | 0x1UL << PSW_offPOM \ - | 0x0UL << PSW_offIFCON \ - | 0x7UL << PSW_offCPL) - -#define IVB_MSK \ - (IVB_mskEVIC | IVB_mskESZ | IVB_mskIVBASE) -#define IVB_INIT \ - ((VECTOR_BASE >> IVB_offIVBASE) << IVB_offIVBASE\ - | 0x1UL << IVB_offESZ \ - | 0x0UL << IVB_offEVIC) - - -#pragma weak c_startup = c_startup_common - -void c_startup(void); - -/* - * Default c_startup() function which used for those relocation from LMA to VMA. - */ -static void c_startup_common(void) -{ -#ifdef XIP_MODE - /* Data section initialization */ -#define MEMCPY(des, src, n) __builtin_memcpy ((des), (src), (n)) - extern char __rw_lma_start, __rw_lma_end, __rw_vma_start; - unsigned int size = &__rw_lma_end - &__rw_lma_start; - - /* Copy data section from LMA to VMA */ - MEMCPY(&__rw_vma_start, &__rw_lma_start, size); -#else - /* We do nothing for those LMA equal to VMA */ -#endif -} - -static void cpu_init(void) -{ - unsigned int reg; - - /* Set PSW GIE/INTL to 0, superuser & CPL to 7 */ - reg = (__nds32__mfsr(NDS32_SR_PSW) & ~PSW_MSK) | PSW_INIT; - __nds32__mtsr(reg, NDS32_SR_PSW); - __nds32__isb(); - - /* Set vector size: 16 byte, base: VECTOR_BASE, mode: IVIC */ - reg = (__nds32__mfsr(NDS32_SR_IVB) & ~IVB_MSK) | IVB_INIT; - __nds32__mtsr(reg, NDS32_SR_IVB); - - /* - * Check interrupt priority programmable (IVB.PROG_PRI_LVL) - * 0: Fixed priority, 1: Programmable priority - */ - if (reg & IVB_mskPROG_PRI_LVL) - { - /* Set PPL2FIX_EN to 0 to enable Programmable Priority Level */ - __nds32__mtsr(0x0, NDS32_SR_INT_CTRL); - } - - /* Mask and clear hardware interrupts */ - if (reg & IVB_mskIVIC_VER) - { - /* IVB.IVIC_VER >= 1*/ - __nds32__mtsr(0x0, NDS32_SR_INT_MASK2); - __nds32__mtsr(-1, NDS32_SR_INT_PEND2); - } - else - { - __nds32__mtsr(__nds32__mfsr(NDS32_SR_INT_MASK) & ~0xFFFF, NDS32_SR_INT_MASK); - } -} - -/* - * Vectors initialization. This means to copy exception handler code to - * vector entry base address. - */ -static void vector_init(void) -{ - extern unsigned int OS_Int_Vectors, OS_Int_Vectors_End; - - if ((unsigned int)&OS_Int_Vectors != VECTOR_BASE) - { - volatile unsigned int *vector_srcptr = &OS_Int_Vectors; - volatile unsigned int *vector_dstptr = (unsigned int *)VECTOR_BASE; - - /* copy vector table to VECTOR_BASE */ - while (vector_srcptr != &OS_Int_Vectors_End) - *vector_dstptr++ = *vector_srcptr++; - } -} - -/* - * NDS32 reset handler to reset all devices sequentially and call application - * entry function. - */ -void reset(void) -{ - extern void hardware_init(void); - extern void bsp_init(void); - extern void rtthread_startup(void); - - /* - * Initialize CPU to a post-reset state, ensuring the ground doesn't - * shift under us while we try to set things up. - */ - cpu_init(); - - /* - * Initialize LMA/VMA sections. - * Relocation for any sections that need to be copied from LMA to VMA. - */ - c_startup(); - - /* Copy vector table to vector base address */ - vector_init(); - - /* Call platform specific hardware initialization */ - hardware_init(); - - /* Setup the OS system required initialization */ - bsp_init(); - - /* Application enrty function */ - rtthread_startup(); - - /* Never go back here! */ - while(1); -} diff --git a/bsp/AE210P/rtconfig.h b/bsp/AE210P/rtconfig.h deleted file mode 100644 index 3308aab8a3..0000000000 --- a/bsp/AE210P/rtconfig.h +++ /dev/null @@ -1,199 +0,0 @@ -/* RT-Thread config file */ -#ifndef __RTTHREAD_CFG_H__ -#define __RTTHREAD_CFG_H__ - -/* RT_NAME_MAX*/ -#define RT_NAME_MAX 8 - -/* RT_ALIGN_SIZE*/ -#define RT_ALIGN_SIZE 4 - -/* PRIORITY_MAX */ -#define RT_THREAD_PRIORITY_MAX 32 - -/* Tick per Second */ -#define RT_TICK_PER_SECOND (100) - -/* SECTION: RT_DEBUG */ -/* Thread Debug */ -#define RT_DEBUG -#define RT_THREAD_DEBUG - -#define RT_USING_OVERFLOW_CHECK - -/* Using Hook */ -#define RT_USING_HOOK - -/* Using Software Timer */ -/* #define RT_USING_TIMER_SOFT */ -#define RT_TIMER_THREAD_PRIO 4 -#define RT_TIMER_THREAD_STACK_SIZE 512 -#define RT_TIMER_TICK_PER_SECOND 10 - -//#define RT_PRINTF_LONGLONG - -/* SECTION: IPC */ -/* Using Semaphore*/ -#define RT_USING_SEMAPHORE - -/* Using Mutex */ -#define RT_USING_MUTEX - -/* Using Event */ -#define RT_USING_EVENT - -/* Using MailBox */ -#define RT_USING_MAILBOX - -/* Using Message Queue */ -#define RT_USING_MESSAGEQUEUE - -/* SECTION: Memory Management */ -/* Using Memory Pool Management*/ -//#define RT_USING_MEMPOOL - -/* Using Dynamic Heap Management */ -#define RT_USING_HEAP - -/* Using Small MM */ -#define RT_USING_SMALL_MEM - -// -#define RT_USING_COMPONENTS_INIT - -/* SECTION: Device System */ -/* Using Device System */ -#define RT_USING_DEVICE -// -#define RT_USING_DEVICE_IPC -// -#define RT_USING_SERIAL - -/* SECTION: Console options */ -#define RT_USING_CONSOLE -//#define RT_KPRINTF -/* the buffer size of console*/ -#define RT_CONSOLEBUF_SIZE 260 -// -#define RT_CONSOLE_DEVICE_NAME "uart02" - -/* SECTION: finsh, a C-Express shell */ -#define RT_USING_FINSH -/* Using symbol table */ -#define FINSH_USING_SYMTAB -#define FINSH_USING_DESCRIPTION - -/* SECTION: MSH, a bash shell */ -#define FINSH_USING_MSH -#define FINSH_USING_MSH_DEFAULT - -/* SECTION: MXCLI, modified base-on MSH */ -//#define FINSH_USING_MXCLI - -/* SECTION: device filesystem */ -//#define RT_USING_DFS -//#define DFS_USING_WORKDIR -//#define RT_USING_DFS_DEVFS - -//#define RT_USING_DFS_JFFS2 -/* Reentrancy (thread safe) of the FatFs module. */ -#define RT_DFS_ELM_REENTRANT -/* Number of volumes (logical drives) to be used. */ -#define RT_DFS_ELM_DRIVES 2 -/* #define RT_DFS_ELM_USE_LFN 1 */ -/* #define RT_DFS_ELM_CODE_PAGE 936 */ -#define RT_DFS_ELM_MAX_LFN 255 -/* Maximum sector size to be handled. */ -#define RT_DFS_ELM_MAX_SECTOR_SIZE 512 - -/* the max number of mounted filesystem */ -#define DFS_FILESYSTEMS_MAX 2 -/* the max number of opened files */ -#define DFS_FD_MAX 4 - -/* SECTION: lwip, a lighwight TCP/IP protocol stack */ -/* #define RT_USING_LWIP */ -/* LwIP uses RT-Thread Memory Management */ -#define RT_LWIP_USING_RT_MEM -/* Enable ICMP protocol*/ -#define RT_LWIP_ICMP -/* Enable UDP protocol*/ -#define RT_LWIP_UDP -/* Enable TCP protocol*/ -#define RT_LWIP_TCP -/* Enable DNS */ -#define RT_LWIP_DNS - -/* the number of simulatenously active TCP connections*/ -#define RT_LWIP_TCP_PCB_NUM 5 - -/* Using DHCP */ -/* #define RT_LWIP_DHCP */ - -/* ip address of target*/ -#define RT_LWIP_IPADDR0 192 -#define RT_LWIP_IPADDR1 168 -#define RT_LWIP_IPADDR2 1 -#define RT_LWIP_IPADDR3 30 - -/* gateway address of target*/ -#define RT_LWIP_GWADDR0 192 -#define RT_LWIP_GWADDR1 168 -#define RT_LWIP_GWADDR2 1 -#define RT_LWIP_GWADDR3 1 - -/* mask address of target*/ -#define RT_LWIP_MSKADDR0 255 -#define RT_LWIP_MSKADDR1 255 -#define RT_LWIP_MSKADDR2 255 -#define RT_LWIP_MSKADDR3 0 - -/* tcp thread options */ -#define RT_LWIP_TCPTHREAD_PRIORITY 12 -#define RT_LWIP_TCPTHREAD_MBOX_SIZE 10 -#define RT_LWIP_TCPTHREAD_STACKSIZE 1024 - -/* ethernet if thread options */ -#define RT_LWIP_ETHTHREAD_PRIORITY 15 -#define RT_LWIP_ETHTHREAD_MBOX_SIZE 10 -#define RT_LWIP_ETHTHREAD_STACKSIZE 512 - -/* TCP sender buffer space */ -#define RT_LWIP_TCP_SND_BUF 8192 -/* TCP receive window. */ -#define RT_LWIP_TCP_WND 8192 - -/* SECTION: RT-Thread/GUI */ -/* #define RT_USING_RTGUI */ - -/* name length of RTGUI object */ -#define RTGUI_NAME_MAX 12 -/* support 16 weight font */ -#define RTGUI_USING_FONT16 -/* support Chinese font */ -#define RTGUI_USING_FONTHZ -/* use DFS as file interface */ -#define RTGUI_USING_DFS_FILERW -/* use font file as Chinese font */ -#define RTGUI_USING_HZ_FILE -/* use Chinese bitmap font */ -#define RTGUI_USING_HZ_BMP -/* use small size in RTGUI */ -#define RTGUI_USING_SMALL_SIZE -/* use mouse cursor */ -/* #define RTGUI_USING_MOUSE_CURSOR */ -/* default font size in RTGUI */ -#define RTGUI_DEFAULT_FONT_SIZE 16 - -/* image support */ -/* #define RTGUI_IMAGE_XPM */ -/* #define RTGUI_IMAGE_BMP */ - -// -// #define RT_USING_CMSIS_OS -// -#define RT_USING_RTT_CMSIS -// -// #define RT_USING_BSP_CMSIS - -#endif diff --git a/bsp/AE210P/start.S b/bsp/AE210P/start.S deleted file mode 100644 index 73caedf298..0000000000 --- a/bsp/AE210P/start.S +++ /dev/null @@ -1,197 +0,0 @@ -!******************************************************************************************************** -! -! (c) Copyright 2005-2014, Andes Techonology -! All Rights Reserved -! -! NDS32 Generic Port -! GNU C Compiler -! -!******************************************************************************************************** -!******************************************************************************************************** -! INCLUDE ASSEMBLY CONSTANTS -!******************************************************************************************************** - -#include -#include "nds32_defs.h" -#include "os_cpu_common.h" - -#ifndef VECTOR_NUMINTRS -#define VECTOR_NUMINTRS 32 -#endif - - .global OS_Init_Nds32 - .global OS_Int_Vectors - .global OS_Int_Vectors_End - - .macro WEAK_DEFAULT weak_sym, default_handler - .weak \weak_sym - .set \weak_sym ,\default_handler - .endm - - ! Define standard NDS32 vector table entry point of - ! exception/interruption vectors - .macro VECTOR handler - WEAK_DEFAULT \handler, OS_Default_Exception - .align 4 -__\handler: -#ifdef MPU_SUPPORT - la $p0, \handler - jr5 $p0 -#else - pushm $r0, $r5 - la $r0, \handler - jr5 $r0 -#endif - .endm - - .macro INTERRUPT_VECTOR num - WEAK_DEFAULT OS_Trap_Interrupt_HW\num, OS_Default_Interrupt - .align 4 -__OS_Trap_Interrupt_HW\num: -#ifdef MPU_SUPPORT - la $p1, OS_Trap_Interrupt_HW\num - li $p0, \num - jr5 $p1 -#else - pushm $r0, $r5 - la $r1, OS_Trap_Interrupt_HW\num - li $r0, \num - jr5 $r1 -#endif - .endm - -!******************************************************************************************************** -! Vector Entry Table -!******************************************************************************************************** - .section .nds32_init, "ax" - -OS_Int_Vectors: - b OS_Init_Nds32 ! (0) Trap Reset/NMI - VECTOR OS_Trap_TLB_Fill ! (1) Trap TLB fill - VECTOR OS_Trap_PTE_Not_Present ! (2) Trap PTE not present - VECTOR OS_Trap_TLB_Misc ! (3) Trap TLB misc - VECTOR OS_Trap_TLB_VLPT_Miss ! (4) Trap TLB VLPT miss - VECTOR OS_Trap_Machine_Error ! (5) Trap Machine error - VECTOR OS_Trap_Debug_Related ! (6) Trap Debug related - VECTOR OS_Trap_General_Exception ! (7) Trap General exception - VECTOR OS_Trap_Syscall ! (8) Syscall - - ! Interrupt vectors - .altmacro - .set irqno, 0 - .rept VECTOR_NUMINTRS - INTERRUPT_VECTOR %irqno - .set irqno, irqno+1 - .endr - - .align 4 -OS_Int_Vectors_End: - -!****************************************************************************************************** -! Start Entry -!****************************************************************************************************** - .section .text - .global _start -OS_Init_Nds32: -_start: - !************************** Begin of do-not-modify ************************** - ! Please don't modify this code - ! Initialize the registers used by the compiler - - nds32_init ! NDS32 startup initial macro in - - !*************************** End of do-not-modify *************************** - -#ifdef CONFIG_HWZOL - ! enable AEN - mfsr $r0, $PSW - ori $r0, $r0, (1 << PSW_offAEN) - mtsr $r0, $PSW -#endif - -#if (defined(CONFIG_CPU_ICACHE_ENABLE) || defined(CONFIG_CPU_DCACHE_ENABLE)) - ! disable cache - mfsr $r0, $CACHE_CTL - li $r1, ~(CACHE_CTL_mskIC_EN | CACHE_CTL_mskDC_EN) - and $r0, $r0, $r1 - mtsr $r0, $CACHE_CTL -#endif - - ! Do system low level setup. It must be a leaf function. - bal _nds32_init_mem - -#if 1 /* Speed prefer */ - ! We do this on a word basis. - ! Currently, the default linker script guarantee - ! the __bss_start/_end boundary word-aligned. - - ! Clear bss - la $r0, __bss_start - la $r1, _end - sub $r2, $r1, $r0 ! $r2: Size of .bss - beqz $r2, clear_end - - andi $r7, $r2, 0x1f ! $r7 = $r2 mod 32 - movi $r3, 0 - movi $r4, 0 - movi $r5, 0 - movi $r6, 0 - movi $r8, 0 - movi $r9, 0 - movi $r10, 0 - beqz $r7, clear_loop ! if $r7 == 0, bss_size%32 == 0 - sub $r2, $r2, $r7 - -first_clear: - swi.bi $r3, [$r0], #4 ! clear each word - addi $r7, $r7, -4 - bnez $r7, first_clear - li $r1, 0xffffffe0 - and $r2, $r2, $r1 ! check bss_size/32 == 0 or not - beqz $r2, clear_end ! if bss_size/32 == 0 , needless to clear - -clear_loop: - smw.bim $r3, [$r0], $r10 !clear each 8 words - addi $r2, $r2, -32 - bgez $r2, clear_loop - -clear_end: -#else /* Size prefer */ - ! Clear bss - la $r0, _edata - la $r1, _end - beq $r0, $r1, 2f - li $r2, #0 -1: - swi.bi $r2, [$r0], #4 - bne $r0, $r1, 1b -2: -#endif - ! Set-up the stack pointer - la $sp, _stack - - ! System reset handler - bal reset - - ! Default exceptions / interrupts handler -OS_Default_Exception: -OS_Default_Interrupt: -die: - b die - -!******************************************************************************************************** -! Interrupt vector Table -!******************************************************************************************************** - - .data - .align 2 - - ! These tables contain the isr pointers used to deliver interrupts - .global OS_CPU_Vector_Table -OS_CPU_Vector_Table: - .rept 32 - .long OS_Default_Interrupt - .endr - - .end - diff --git a/bsp/AE210P/startup.c b/bsp/AE210P/startup.c deleted file mode 100644 index 1891d24a8f..0000000000 --- a/bsp/AE210P/startup.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * File : startup.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006, RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://openlab.rt-thread.com/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2006-08-31 Bernard first implementation - */ - -#include -#include - -#ifdef RT_USING_COMPONENTS_INIT -#include -#endif /* RT_USING_COMPONENTS_INIT */ - -#include "board.h" - -extern int rt_application_init(void); // define in application/application.c - -#ifdef __CC_ARM -extern int Image$$RW_IRAM1$$ZI$$Limit; -#elif __ICCARM__ -#pragma section="HEAP" -#else -extern int __bss_end; -extern int _stack; -#endif - -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert error has occurred. -* Input : - file: pointer to the source file name -* - line: assert error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(char* file, int line) -{ - rt_kprintf("\n\r Wrong parameter value detected on\r\n"); - rt_kprintf(" file %s\r\n", file); - rt_kprintf(" line %d\r\n", line); - - while (1) ; -} - -/** - * This function will startup RT-Thread RTOS. - */ -void rtthread_startup(void) -{ - /* show version */ - rt_show_version(); - -#ifdef RT_USING_HEAP -#if STM32_EXT_SRAM - rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END); -#else -#ifdef __CC_ARM - rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)MXT_IRAM_END); -#elif __ICCARM__ - rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END); -#else - /* init memory system */ - rt_system_heap_init((void *)0x00250000, (void *)0x00280000); -#endif -#endif /* STM32_EXT_SRAM */ -#endif /* RT_USING_HEAP */ - -#ifdef RT_USING_COMPONENTS_INIT - rt_components_board_init(); -#endif - - /* init scheduler system */ - rt_system_scheduler_init(); - - /* initialize timer */ - rt_system_timer_init(); - - /* init timer thread */ - rt_system_timer_thread_init(); - - /* init application */ - rt_application_init(); - - /* init idle thread */ - rt_thread_idle_init(); - - /* start scheduler */ - rt_system_scheduler_start(); - - /* never reach here */ - return ; -} - -//int main(void) -//{ -// /* disable interrupt first */ -// rt_hw_interrupt_disable(); -// -// /* startup RT-Thread RTOS */ -// rtthread_startup(); -// -// return 0; -//} - -/*@}*/