From 2b41f80f0e469530317090d48e65d604f11c5fc9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E8=A4=9A=E4=BB=95=E6=88=90?= <1468559561@qq.com> Date: Mon, 2 Jan 2023 11:55:28 +0800 Subject: [PATCH] [rtduino]: fix README --- .../applications/arduino_pinout/README.md | 1 - bsp/stm32/stm32f427-robomaster-a/README.md | 2 +- .../applications/arduino_pinout/README.md | 1 - 3 files changed, 1 insertion(+), 3 deletions(-) diff --git a/bsp/stm32/stm32f407-robomaster-c/applications/arduino_pinout/README.md b/bsp/stm32/stm32f407-robomaster-c/applications/arduino_pinout/README.md index b316883341..59927333b3 100644 --- a/bsp/stm32/stm32f407-robomaster-c/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f407-robomaster-c/applications/arduino_pinout/README.md @@ -18,7 +18,6 @@ Hardware Drivers Config ---> 更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。 -![xxx-pinout](xxx-pinout.jpg) | Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | | ------------------- | --------- | ---- | ------------------------------------------------------------------------- | | 0 (D0) | PH11 | 是 | 板载用户LED | diff --git a/bsp/stm32/stm32f427-robomaster-a/README.md b/bsp/stm32/stm32f427-robomaster-a/README.md index bba5febd73..42a1960429 100644 --- a/bsp/stm32/stm32f427-robomaster-a/README.md +++ b/bsp/stm32/stm32f427-robomaster-a/README.md @@ -106,7 +106,7 @@ msh > ## 注意事项 -- 1. 由于本开发板的电源设计较为复杂。使用本开发板时，**强烈建议您通过24v直流XT30接口(上图中下方黄色电源接口) 进行供电** ，此时红色电源指示灯(位于黑色按键下方)会亮起。否则可能导致部分板载外设（例如CAN通信）因无法上电而无法正常使用，详情请参见官方提供的原理图。 +- 由于本开发板的电源设计较为复杂。使用本开发板时，**强烈建议您通过24v直流XT30接口(上图中下方黄色电源接口) 进行供电** ，此时红色电源指示灯(位于黑色按键下方)会亮起。否则可能导致部分板载外设（例如CAN通信）因无法上电而无法正常使用，详情请参见官方提供的原理图。 ## 联系人信息 diff --git a/bsp/stm32/stm32f427-robomaster-a/applications/arduino_pinout/README.md b/bsp/stm32/stm32f427-robomaster-a/applications/arduino_pinout/README.md index 815fa32c3b..fa3dffd80b 100644 --- a/bsp/stm32/stm32f427-robomaster-a/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f427-robomaster-a/applications/arduino_pinout/README.md @@ -18,7 +18,6 @@ Hardware Drivers Config ---> 更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。 -![xxx-pinout](xxx-pinout.jpg) | Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注 | | ------------------- | --------- | ---- | ------------------------------------------------------------------------- | | 0 (D0) | PF14 | 是 | 板载用户LED |