diff --git a/bsp/stm32f429-disco/Libraries/CMSIS/ST/STM32F4xx/Include/stm32f4xx.h b/bsp/stm32f429-disco/Libraries/CMSIS/ST/STM32F4xx/Include/stm32f4xx.h index ed6ee99ff2..a26f783092 100644 --- a/bsp/stm32f429-disco/Libraries/CMSIS/ST/STM32F4xx/Include/stm32f4xx.h +++ b/bsp/stm32f429-disco/Libraries/CMSIS/ST/STM32F4xx/Include/stm32f4xx.h @@ -2,11 +2,11 @@ ****************************************************************************** * @file stm32f4xx.h * @author MCD Application Team - * @version V1.0.0 - * @date 30-September-2011 + * @version V1.3.0 + * @date 08-November-2013 * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File. * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F4xx devices. + * definitions and memory mapping for STM32F4xx devices. * * The file is the unique include file that the application programmer * is using in the C source code, usually in main.c. This file contains: @@ -25,14 +25,20 @@ ****************************************************************************** * @attention * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. * - *

© COPYRIGHT 2011 STMicroelectronics

****************************************************************************** */ @@ -59,16 +65,40 @@ application */ -#if !defined (STM32F4XX) - #define STM32F4XX +#if !defined (STM32F40_41xxx) && !defined (STM32F427_437xx) && !defined (STM32F429_439xx) && !defined (STM32F401xx) + /* #define STM32F40_41xxx */ /*!< STM32F405RG, STM32F405VG, STM32F405ZG, STM32F415RG, STM32F415VG, STM32F415ZG, + STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG, STM32F407IE, + STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */ + + /* #define STM32F427_437xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG, STM32F427II, + STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG, STM32F437II Devices */ + + /* #define STM32F429_439xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, + STM32F429NG, STM32F439NI, STM32F429IG, STM32F429II, STM32F439VG, STM32F439VI, + STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, STM32F439NI, + STM32F439IG and STM32F439II Devices */ + + /* #define STM32F401xx */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB, STM32F401VC + STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CExx, STM32F401RE, STM32F401VE Devices */ + #endif +/* Old STM32F40XX definition, maintained for legacy purpose */ +#ifdef STM32F40XX + #define STM32F40_41xxx +#endif /* STM32F40XX */ + +/* Old STM32F427X definition, maintained for legacy purpose */ +#ifdef STM32F427X + #define STM32F427_437xx +#endif /* STM32F427X */ + /* Tip: To avoid modifying this file each time you need to switch between these devices, you can define the device in your toolchain compiler preprocessor. */ -#if !defined (STM32F4XX) - #error "Please select first the target STM32F4XX device used in your application (in stm32f4xx.h file)" +#if !defined (STM32F40_41xxx) && !defined (STM32F427_437xx) && !defined (STM32F429_439xx) && !defined (STM32F401xx) + #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)" #endif #if !defined (USE_STDPERIPH_DRIVER) @@ -77,7 +107,7 @@ In this case, these drivers will not be included and the application code will be based on direct access to peripherals registers */ - /*#define USE_STDPERIPH_DRIVER*/ + /*#define USE_STDPERIPH_DRIVER */ #endif /* USE_STDPERIPH_DRIVER */ /** @@ -90,6 +120,7 @@ #if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #endif /* HSE_VALUE */ /** @@ -97,7 +128,7 @@ Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ + #define HSE_STARTUP_TIMEOUT ((uint16_t)0x05000) /*!< Time out for HSE start up */ #endif /* HSE_STARTUP_TIMEOUT */ #if !defined (HSI_VALUE) @@ -105,10 +136,10 @@ #endif /* HSI_VALUE */ /** - * @brief STM32F4XX Standard Peripherals Library version number V1.0.0 + * @brief STM32F4XX Standard Peripherals Library version number V1.3.0 */ #define __STM32F4XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ -#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ #define __STM32F4XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ #define __STM32F4XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32F4XX_STDPERIPH_VERSION ((__STM32F4XX_STDPERIPH_VERSION_MAIN << 24)\ @@ -131,13 +162,8 @@ #define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */ #define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ -#if !defined (__FPU_PRESENT) - #define __FPU_PRESENT 1 /*!< FPU present */ -#endif /* __FPU_PRESENT */ - - - /** * @brief STM32F4XX Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section @@ -173,6 +199,8 @@ typedef enum IRQn DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + +#if defined (STM32F40_41xxx) CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ @@ -225,7 +253,7 @@ typedef enum IRQn DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ - USART6_IRQn = 71, /*!< USART6 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ @@ -234,8 +262,198 @@ typedef enum IRQn OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ DCMI_IRQn = 78, /*!< DCMI global interrupt */ CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ - HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ FPU_IRQn = 81 /*!< FPU global interrupt */ +#endif /* STM32F40_41xxx */ + +#if defined (STM32F427_437xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ +#endif /* STM32F427_437xx */ + +#if defined (STM32F429_439xx) + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90 /*!< DMA2D global Interrupt */ +#endif /* STM32F429_439xx */ + +#if defined (STM32F401xx) + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + SPI4_IRQn = 84 /*!< SPI4 global Interrupt */ +#endif /* STM32F401xx */ + } IRQn_Type; /** @@ -485,6 +703,37 @@ typedef struct __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ } DMA_TypeDef; + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; /** * @brief Ethernet MAC @@ -580,14 +829,16 @@ typedef struct typedef struct { - __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ - __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ - __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ - __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ - __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */ } FLASH_TypeDef; +#if defined (STM32F40_41xxx) /** * @brief Flexible Static Memory Controller */ @@ -646,6 +897,81 @@ typedef struct __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ } FSMC_Bank4_TypeDef; +#endif /* STM32F40_41xxx */ + +#if defined (STM32F427_437xx) || defined (STM32F429_439xx) +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FMC_Bank2_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ + __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ + __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ + __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ + __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ +} FMC_Bank4_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; +#endif /* STM32F427_437xx || STM32F429_439xx */ /** * @brief General Purpose I/O @@ -702,6 +1028,8 @@ typedef struct uint16_t RESERVED7; /*!< Reserved, 0x1E */ __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ uint16_t RESERVED8; /*!< Reserved, 0x22 */ + __IO uint16_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */ + uint16_t RESERVED9; /*!< Reserved, 0x26 */ } I2C_TypeDef; /** @@ -716,6 +1044,54 @@ typedef struct __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ } IWDG_TypeDef; +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + /** * @brief Power Control */ @@ -762,6 +1138,9 @@ typedef struct uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR; /*!< RCC Dedicated Clocks configuration register, Address offset: 0x8C */ + } RCC_TypeDef; /** @@ -812,6 +1191,28 @@ typedef struct __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ } RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + /** * @brief SD host Interface */ @@ -949,26 +1350,42 @@ typedef struct typedef struct { - __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ - __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ - __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ - __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ - __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ - __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ - __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ - __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ - __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ - __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ - __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ - __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ - __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ - __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ - __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ - __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ - __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ - __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ - __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ - __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ + __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ + __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ + __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ + __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ + __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ + __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ + __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ + __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ + __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ + __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ + __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ + __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ + __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ + __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ + __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ } CRYP_TypeDef; /** @@ -977,18 +1394,27 @@ typedef struct typedef struct { - __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ - __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ - __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ - __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ - __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ - __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ - uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ - __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[54]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1CC */ } HASH_TypeDef; /** - * @brief HASH + * @brief HASH_DIGEST + */ + +typedef struct +{ + __IO uint32_t HR[8]; /*!< HASH digest registers, Address offset: 0x310-0x32C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief RNG */ typedef struct @@ -1009,13 +1435,22 @@ typedef struct #define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */ #define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */ #define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */ +#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */ #define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ #define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */ + +#if defined (STM32F40_41xxx) #define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ +#endif /* STM32F40_41xxx */ + +#if defined (STM32F427_437xx) || defined (STM32F429_439xx) +#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC registers base address */ +#endif /* STM32F427_437xx || STM32F429_439xx */ #define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */ #define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */ #define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */ +#define SRAM3_BB_BASE ((uint32_t)0x22400000) /*!< SRAM3(64 KB) base address in the bit-band region */ #define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ #define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */ @@ -1058,6 +1493,8 @@ typedef struct #define CAN2_BASE (APB1PERIPH_BASE + 0x6800) #define PWR_BASE (APB1PERIPH_BASE + 0x7000) #define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) /*!< APB2 peripherals */ #define TIM1_BASE (APB2PERIPH_BASE + 0x0000) @@ -1070,11 +1507,20 @@ typedef struct #define ADC_BASE (APB2PERIPH_BASE + 0x2300) #define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) #define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) #define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800) #define EXTI_BASE (APB2PERIPH_BASE + 0x3C00) #define TIM9_BASE (APB2PERIPH_BASE + 0x4000) #define TIM10_BASE (APB2PERIPH_BASE + 0x4400) #define TIM11_BASE (APB2PERIPH_BASE + 0x4800) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024) +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104) /*!< AHB1 peripherals */ #define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) @@ -1086,6 +1532,8 @@ typedef struct #define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) #define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) #define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800) #define CRC_BASE (AHB1PERIPH_BASE + 0x3000) #define RCC_BASE (AHB1PERIPH_BASE + 0x3800) #define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) @@ -1112,19 +1560,33 @@ typedef struct #define ETH_MMC_BASE (ETH_BASE + 0x0100) #define ETH_PTP_BASE (ETH_BASE + 0x0700) #define ETH_DMA_BASE (ETH_BASE + 0x1000) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000) /*!< AHB2 peripherals */ #define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) #define CRYP_BASE (AHB2PERIPH_BASE + 0x60000) #define HASH_BASE (AHB2PERIPH_BASE + 0x60400) +#define HASH_DIGEST_BASE (AHB2PERIPH_BASE + 0x60710) #define RNG_BASE (AHB2PERIPH_BASE + 0x60800) +#if defined (STM32F40_41xxx) /*!< FSMC Bankx registers base address */ #define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) #define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) #define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) #define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) #define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) +#endif /* STM32F40_41xxx */ + +#if defined (STM32F427_437xx) || defined (STM32F429_439xx) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) +#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) +#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) +#endif /* STM32F427_437xx || STM32F429_439xx */ /* Debug MCU registers base address */ #define DBGMCU_BASE ((uint32_t )0xE0042000) @@ -1163,6 +1625,8 @@ typedef struct #define CAN2 ((CAN_TypeDef *) CAN2_BASE) #define PWR ((PWR_TypeDef *) PWR_BASE) #define DAC ((DAC_TypeDef *) DAC_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) #define TIM1 ((TIM_TypeDef *) TIM1_BASE) #define TIM8 ((TIM_TypeDef *) TIM8_BASE) #define USART1 ((USART_TypeDef *) USART1_BASE) @@ -1172,12 +1636,21 @@ typedef struct #define ADC2 ((ADC_TypeDef *) ADC2_BASE) #define ADC3 ((ADC_TypeDef *) ADC3_BASE) #define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) #define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) #define EXTI ((EXTI_TypeDef *) EXTI_BASE) #define TIM9 ((TIM_TypeDef *) TIM9_BASE) #define TIM10 ((TIM_TypeDef *) TIM10_BASE) #define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) @@ -1187,6 +1660,8 @@ typedef struct #define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) #define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) #define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) #define CRC ((CRC_TypeDef *) CRC_BASE) #define RCC ((RCC_TypeDef *) RCC_BASE) #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) @@ -1209,15 +1684,30 @@ typedef struct #define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) #define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) #define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) #define DCMI ((DCMI_TypeDef *) DCMI_BASE) #define CRYP ((CRYP_TypeDef *) CRYP_BASE) #define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) #define RNG ((RNG_TypeDef *) RNG_BASE) + +#if defined (STM32F40_41xxx) #define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) #define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) #define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) #define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) #define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#endif /* STM32F40_41xxx */ + +#if defined (STM32F427_437xx) || defined (STM32F429_439xx) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank2 ((FMC_Bank2_TypeDef *) FMC_Bank2_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank4 ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#endif /* STM32F427_437xx || STM32F429_439xx */ + #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) /** @@ -1242,12 +1732,12 @@ typedef struct /* */ /******************************************************************************/ /******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD ((uint8_t)0x01) /*! - -#ifdef RT_USING_EXT_SDRAM -struct rt_memheap system_heap; - -void sram_init(void) -{ - /* initialize the built-in SRAM as a memory heap */ - rt_memheap_init(&system_heap, - "system", - (void *)HEAP_BEGIN, - (rt_uint32_t)HEAP_END - (rt_uint32_t)HEAP_BEGIN); -} - -void *sram_malloc(unsigned long size) -{ - return rt_memheap_alloc(&system_heap, size); -} -RTM_EXPORT(sram_malloc); - -void sram_free(void *ptr) -{ - rt_memheap_free(ptr); -} -RTM_EXPORT(sram_free); - -void *sram_realloc(void *ptr, unsigned long size) -{ - return rt_memheap_realloc(&system_heap, ptr, size); -} -RTM_EXPORT(sram_realloc); - -#endif diff --git a/bsp/stm32f429-disco/applications/sram.h b/bsp/stm32f429-disco/applications/sram.h deleted file mode 100644 index 6a6f4f0cff..0000000000 --- a/bsp/stm32f429-disco/applications/sram.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * File : sram.h - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2015 RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2015-08-03 xiaonong The first version for STM32F7 - */ - -#ifndef __SRAM_H__ -#define __SRAM_H__ - -void sram_init(void); -void *sram_malloc(unsigned long nbytes); -void sram_free(void *ptr); -void *sram_realloc(void *ptr, unsigned long nbytes); - -#endif diff --git a/bsp/stm32f429-disco/applications/startup.c b/bsp/stm32f429-disco/applications/startup.c index e0547efb78..f0c26be743 100644 --- a/bsp/stm32f429-disco/applications/startup.c +++ b/bsp/stm32f429-disco/applications/startup.c @@ -80,7 +80,11 @@ void rtthread_startup(void) /* init timer system */ rt_system_timer_init(); - rt_system_heap_init((void*)STM32_SRAM_BEGIN, (void*)STM32_SRAM_END); +#ifdef RT_USING_EXT_SDRAM + rt_system_heap_init((void*)EXT_SDRAM_BEGIN, (void*)EXT_SDRAM_END); +#else + rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END); +#endif /* init scheduler system */ rt_system_scheduler_init(); diff --git a/bsp/stm32f429-disco/drivers/board.c b/bsp/stm32f429-disco/drivers/board.c index 30e71eb3da..4cec20f942 100644 --- a/bsp/stm32f429-disco/drivers/board.c +++ b/bsp/stm32f429-disco/drivers/board.c @@ -19,7 +19,6 @@ #include "board.h" #include "usart.h" #include "gpio.h" -#include "sram.h" /** * @addtogroup STM32 @@ -101,12 +100,7 @@ void rt_hw_board_init() stm32_hw_pin_init(); #endif -#ifdef RT_USING_EXT_SDRAM - rt_system_heap_init((void*)EXT_SDRAM_BEGIN, (void*)EXT_SDRAM_END); - sram_init(); -#else - rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END); -#endif + #ifdef RT_USING_CONSOLE rt_console_set_device(CONSOLE_DEVICE); diff --git a/bsp/stm32f429-disco/drivers/board.h b/bsp/stm32f429-disco/drivers/board.h index e613db07cc..4388ef242f 100644 --- a/bsp/stm32f429-disco/drivers/board.h +++ b/bsp/stm32f429-disco/drivers/board.h @@ -28,10 +28,10 @@ // Begin Address of External SDRAM // Default: 0xD0000000 -#define EXT_SDRAM_BEGIN SDRAM_BANK_ADDR /* the begining address of external SRAM */ +#define EXT_SDRAM_BEGIN SDRAM_BANK_ADDR /* the begining address of external SDRAM */ // End Address of External SRAM // Default: 0xD0800000 -#define EXT_SDRAM_END SDRAM_BANK_ADDR + IS42S16400J_SIZE /* the end address of external SRAM */ +#define EXT_SDRAM_END SDRAM_BANK_ADDR + IS42S16400J_SIZE /* the end address of external SDRAM */ // // Internal SRAM memory size[Kbytes] <8-64> diff --git a/bsp/stm32f429-disco/readme.md b/bsp/stm32f429-disco/readme.md index e1d0e56820..3971dafdfa 100644 --- a/bsp/stm32f429-disco/readme.md +++ b/bsp/stm32f429-disco/readme.md @@ -1,25 +1,12 @@ board info: -STM32F4 discovery -http://www.st.com/internet/evalboard/product/252419.jsp +STM32F429I-DISC1 +http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-discovery-kits/32f429idiscovery.html note: in drivers/stm32f4xx_conf.h - /* Redefine the HSE value; it's equal to 8 MHz on the STM32F4-DISCOVERY Kit */ + /* Redefine the HSE value; it's equal to 8 MHz on the STM32F429I-DISC1 Kit */ #define HSE_VALUE ((uint32_t)8000000) - - - - **================= IAR WARNING =================** - - after use `scons --target=iar -s` cmd to product IAR project, you have to add iar link file by hand - - IAR steps: - 1. Project-->Options-->Linker - 2. Config-->Linker Configuration file - 3. select `Override Default`, then select `bsp/stm32f40x/stm32f40x_flash.icf` - 4. rebuild project - - + + **TODO** auto add *.icf by scons script - diff --git a/bsp/stm32f429-disco/rtconfig.h b/bsp/stm32f429-disco/rtconfig.h index 9cca3f8424..001c21d1a8 100644 --- a/bsp/stm32f429-disco/rtconfig.h +++ b/bsp/stm32f429-disco/rtconfig.h @@ -17,6 +17,7 @@ /* SECTION: RT_DEBUG */ /* Thread Debug */ #define RT_DEBUG +#define RT_DEBUG_INIT 1 #define RT_USING_OVERFLOW_CHECK /* Using Hook */ @@ -51,10 +52,14 @@ /* Using Dynamic Heap Management */ #define RT_USING_HEAP - +#define RT_USING_MEMHEAP /* Using Small MM */ #define RT_USING_SMALL_MEM +#define RT_USING_COMPONENTS_INIT + +#define RT_USING_EXT_SDRAM + /* SECTION: Device System */ /* Using Device System */ #define RT_USING_DEVICE diff --git a/bsp/stm32f429-disco/rtconfig.py b/bsp/stm32f429-disco/rtconfig.py index 81c8572ab9..1e9693e93a 100644 --- a/bsp/stm32f429-disco/rtconfig.py +++ b/bsp/stm32f429-disco/rtconfig.py @@ -12,7 +12,7 @@ if os.getenv('RTT_CC'): # EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR if CROSS_TOOL == 'gcc': PLATFORM = 'gcc' - EXEC_PATH = r'/home/zhuoyixu/gcc-arm-none-eabi-5_4-2016q2/bin' + EXEC_PATH = r'/opt/gcc-arm-none-eabi-5_4-2016q2/bin' elif CROSS_TOOL == 'keil': PLATFORM = 'armcc' EXEC_PATH = r'C:/Keil' @@ -41,7 +41,7 @@ if PLATFORM == 'gcc': OBJCPY = PREFIX + 'objcopy' DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' - CFLAGS = DEVICE + ' -g -Wall -DSTM32F429ZI -DSTM32F4XX -DUSE_STDPERIPH_DRIVER -D__ASSEMBLY__ -D__FPU_USED' + CFLAGS = DEVICE + ' -g -Wall -DSTM32F429ZI -DSTM32F429_439xx -DUSE_STDPERIPH_DRIVER -D__ASSEMBLY__ -D__FPU_USED' AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -nostartfiles -Wl,--gc-sections,-Map=rtthread-stm32.map,-cref,-u,Reset_Handler -T stm32_rom.ld' @@ -65,7 +65,7 @@ elif PLATFORM == 'armcc': TARGET_EXT = 'axf' DEVICE = ' --cpu=cortex-m4.fp' - CFLAGS = DEVICE + ' --apcs=interwork -DUSE_STDPERIPH_DRIVER -DSTM32F40_41xxx' + CFLAGS = DEVICE + ' --apcs=interwork -DUSE_STDPERIPH_DRIVER -DSTM32F429_439xx' AFLAGS = DEVICE LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32_rom.sct' diff --git a/bsp/stm32f429-disco/stm32f40x_flash.icf b/bsp/stm32f429-disco/stm32f40x_flash.icf deleted file mode 100644 index 204f459388..0000000000 --- a/bsp/stm32f429-disco/stm32f40x_flash.icf +++ /dev/null @@ -1,36 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; /*STM32 F446RE*/ - -/*Export the end address of ram, to avoid hard-code heap size in application*/ -export symbol __ICFEDIT_region_RAM_end__; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x200; -define symbol __ICFEDIT_size_heap__ = 0x000; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section FSymTab }; -keep { section VSymTab }; -keep { section .rti_fn* }; -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, block CSTACK, last block HEAP}; diff --git a/bsp/stm32f429-disco/template.uvproj b/bsp/stm32f429-disco/template.uvproj new file mode 100755 index 0000000000..1cee2eecb2 --- /dev/null +++ b/bsp/stm32f429-disco/template.uvproj @@ -0,0 +1,388 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread_stm32f4xx + 0x4 + ARM-ADS + + + STM32F407VG + STMicroelectronics + IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 + + "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) + 6103 + stm32f4xx.h + + + + + + + + + + SFD\ST\STM32F4xx\STM32F4xx.sfr + 0 + + + + ST\STM32F4xx\ + ST\STM32F4xx\ + + 0 + 0 + 0 + 0 + 1 + + .\build\ + rtthread-stm32f4xx + 1 + 0 + 0 + 1 + 1 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 8 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4100 + + STLink\ST-LINKIII-KEIL.dll + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 1 + 0 + 8 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x10000000 + 0x10000 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + diff --git a/bsp/stm32f429-disco/template.uvprojx b/bsp/stm32f429-disco/template.uvprojx new file mode 100755 index 0000000000..10551d4e44 --- /dev/null +++ b/bsp/stm32f429-disco/template.uvprojx @@ -0,0 +1,378 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread_stm32f42x + 0x4 + ARM-ADS + + + STM32F429ZITx + STMicroelectronics + Keil.STM32F4xx_DFP.2.8.0 + http://www.keil.com/pack + IRAM(0x20000000,0x30000) IRAM2(0x10000000,0x10000) IROM(0x08000000,0x200000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_2048 -FS08000000 -FL0200000 -FP0($$Device:STM32F429ZITx$CMSIS\Flash\STM32F4xx_2048.FLM)) + 0 + $$Device:STM32F429ZITx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h + + + + + + + + + + $$Device:STM32F429ZITx$CMSIS\SVD\STM32F429x.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + rtthread-stm32f42x + 1 + 0 + 0 + 1 + 1 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4100 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 1 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x30000 + + + 1 + 0x8000000 + 0x200000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x200000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x30000 + + + 0 + 0x10000000 + 0x10000 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + + + STM32F429_439xx + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + +