Merge pull request #1317 from liu2guang/master

[BSP] add fire board support and optimize bsp.|添加野火开发板支持并优化bsp.

bsp/imxrt1052-evk/.config

@@ -76,6 +76,7 @@ CONFIG_FINSH_USING_HISTORY=y
 CONFIG_FINSH_HISTORY_LINES=5
 CONFIG_FINSH_USING_SYMTAB=y
 CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 CONFIG_FINSH_THREAD_PRIORITY=20
 CONFIG_FINSH_THREAD_STACK_SIZE=4096
 CONFIG_FINSH_CMD_SIZE=80
@@ -297,6 +298,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # tools packages
 #
 # CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
 # CONFIG_PKG_USING_IPERF is not set
@@ -307,12 +309,30 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
 
 #
 # example package: hello
 #
 # CONFIG_PKG_USING_HELLO is not set
-# CONFIG_PKG_USING_MULTIBUTTON is not set
 CONFIG_SOC_IMXRT1052=y
+CONFIG_BOARD_RT1050_EVK=y
+# CONFIG_BOARD_RT1050_FIRE is not set
+
+#
+# RT1050_EVK Bsp Config
+#
+
+#
+# Select uart device
+#
 CONFIG_RT_USING_UART1=y
-CONFIG_RT_USING_HP_RTC=y
+# CONFIG_RT_USING_UART2 is not set
+# CONFIG_RT_USING_UART3 is not set
+# CONFIG_RT_USING_UART4 is not set
+# CONFIG_RT_USING_UART5 is not set
+# CONFIG_RT_USING_UART6 is not set
+# CONFIG_RT_USING_UART7 is not set
+# CONFIG_RT_USING_UART8 is not set
+CONFIG_RT_USING_SDRAM=y
+CONFIG_RT_USING_RTC_HP=y

bsp/imxrt1052-evk/Kconfig

@@ -23,17 +23,66 @@ config SOC_IMXRT1052
     select ARCH_ARM_CORTEX_M7
     default y
 
-if RT_USING_SERIAL
+# RT1050 board select!
-config RT_USING_UART1
+choice
-    bool "Using RT_USING_UART1"
+    prompt "RT1050 Board select"
-    default y 
+    default BOARD_RT1050_EVK
-endif
+    config BOARD_RT1050_EVK
+        bool "RT1050_EVK"
+    config BOARD_RT1050_FIRE
+        bool "RT1050_FIRE"
+endchoice
 
-if RT_USING_RTC
+if BOARD_RT1050_EVK
-config RT_USING_HP_RTC
+menu "RT1050_EVK Bsp Config" 
-    bool "Using RT_USING_HP_RTC"
+
+menu "Select uart device"
+    config RT_USING_UART1
+        bool "Using uart1"
+        select RT_USING_SERIAL
+        default y 
+    config RT_USING_UART2
+        bool "Using uart2"
+        select RT_USING_SERIAL
         default n 
-endif
+    config RT_USING_UART3
+        bool "Using uart3"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART4
+        bool "Using uart4"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART5
+        bool "Using uart5"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART6
+        bool "Using uart6"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART7
+        bool "Using uart7"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART8
+        bool "Using uart8"
+        select RT_USING_SERIAL
+        default n 
+endmenu
+
+#menu "SDRAM drive support"
+    config RT_USING_SDRAM
+        bool "Using sdram"
+        default y 
+#endmenu
+
+#menu "RTC drive support"
+    config RT_USING_RTC_HP
+        bool "Using hp rtc"
+        select RT_USING_RTC
+        default n 
+#endmenu
 
 if RT_USING_USB_DEVICE
     choice
@@ -47,4 +96,59 @@ if RT_USING_USB_DEVICE
     endchoice
 endif
 
+endmenu
+endif
 
+if BOARD_RT1050_FIRE
+menu "RT1050_FIRE Bsp Config" 
+
+menu "Select uart device"
+    config RT_USING_UART1
+        bool "Using uart1"
+        select RT_USING_SERIAL
+        default y 
+    config RT_USING_UART2
+        bool "Using uart2"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART3
+        bool "Using uart3"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART4
+        bool "Using uart4"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART5
+        bool "Using uart5"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART6
+        bool "Using uart6"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART7
+        bool "Using uart7"
+        select RT_USING_SERIAL
+        default n 
+    config RT_USING_UART8
+        bool "Using uart8"
+        select RT_USING_SERIAL
+        default n 
+endmenu
+
+#menu "SDRAM drive support"
+    config RT_USING_SDRAM
+        bool "Using sdram"
+        default y 
+#endmenu
+
+#menu "RTC drive support"
+    config RT_USING_RTC_HP
+        bool "Using hp rtc"
+        select RT_USING_RTC
+        default n 
+#endmenu
+
+endmenu
+endif

bsp/imxrt1052-evk/applications/main.c

@@ -38,29 +38,29 @@
 
 void dump_clock(void)
 {
+    rt_kprintf("OSC clock : %d\n",                  CLOCK_GetFreq(kCLOCK_OscClk));
+    rt_kprintf("RTC clock : %d\n",                  CLOCK_GetFreq(kCLOCK_RtcClk));
     rt_kprintf("CPU clock: %d\n",                   CLOCK_GetFreq(kCLOCK_CpuClk)); 
     rt_kprintf("AHB clock : %d\n",                  CLOCK_GetFreq(kCLOCK_AhbClk)); 
     rt_kprintf("SEMC clock : %d\n",                 CLOCK_GetFreq(kCLOCK_SemcClk)); 
     rt_kprintf("IPG clock : %d\n",                  CLOCK_GetFreq(kCLOCK_IpgClk));
-	rt_kprintf("OSC clock selected : %d\n",         CLOCK_GetFreq(kCLOCK_OscClk));
+    rt_kprintf("ARMPLLCLK(PLL1) : %d\n",            CLOCK_GetFreq(kCLOCK_ArmPllClk));
-	rt_kprintf("RTC clock: %d\n",                   CLOCK_GetFreq(kCLOCK_RtcClk));
+    rt_kprintf("SYSPLLCLK(PLL2/528_PLL) : %d\n",    CLOCK_GetFreq(kCLOCK_SysPllClk));
-	rt_kprintf("ARMPLLCLK : %d\n",                  CLOCK_GetFreq(kCLOCK_ArmPllClk));
-	rt_kprintf("USB1PLLCLK : %d\n",                 CLOCK_GetFreq(kCLOCK_Usb1PllClk));
-	rt_kprintf("USB1PLLPDF0CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk));
-	rt_kprintf("USB1PLLPFD1CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd1Clk));
-	rt_kprintf("USB1PLLPFD2CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd2Clk));
-	rt_kprintf("USB1PLLPFD3CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd3Clk));
-	rt_kprintf("USB2PLLCLK : %d\n",                 CLOCK_GetFreq(kCLOCK_Usb2PllClk));
-	rt_kprintf("SYSPLLCLK : %d\n",                  CLOCK_GetFreq(kCLOCK_SysPllClk));
     rt_kprintf("SYSPLLPDF0CLK : %d\n",              CLOCK_GetFreq(kCLOCK_SysPllPfd0Clk));
     rt_kprintf("SYSPLLPFD1CLK : %d\n",              CLOCK_GetFreq(kCLOCK_SysPllPfd1Clk));
     rt_kprintf("SYSPLLPFD2CLK : %d\n",              CLOCK_GetFreq(kCLOCK_SysPllPfd2Clk));
     rt_kprintf("SYSPLLPFD3CLK : %d\n",              CLOCK_GetFreq(kCLOCK_SysPllPfd3Clk));
+    rt_kprintf("USB1PLLCLK(PLL3) : %d\n",           CLOCK_GetFreq(kCLOCK_Usb1PllClk));
+    rt_kprintf("USB1PLLPDF0CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk));
+    rt_kprintf("USB1PLLPFD1CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd1Clk));
+    rt_kprintf("USB1PLLPFD2CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd2Clk));
+    rt_kprintf("USB1PLLPFD3CLK : %d\n",             CLOCK_GetFreq(kCLOCK_Usb1PllPfd3Clk));
+    rt_kprintf("Audio PLLCLK(PLL4) : %d\n",         CLOCK_GetFreq(kCLOCK_AudioPllClk));
+    rt_kprintf("Video PLLCLK(PLL5) : %d\n",         CLOCK_GetFreq(kCLOCK_VideoPllClk));
     rt_kprintf("Enet PLLCLK ref_enetpll0 : %d\n",   CLOCK_GetFreq(kCLOCK_EnetPll0Clk));
     rt_kprintf("Enet PLLCLK ref_enetpll1 : %d\n",   CLOCK_GetFreq(kCLOCK_EnetPll1Clk));
     rt_kprintf("Enet PLLCLK ref_enetpll2 : %d\n",   CLOCK_GetFreq(kCLOCK_EnetPll2Clk));
-	rt_kprintf("Audio PLLCLK : %d\n",               CLOCK_GetFreq(kCLOCK_AudioPllClk));
+    rt_kprintf("USB2PLLCLK(PLL7) : %d\n",           CLOCK_GetFreq(kCLOCK_Usb2PllClk));
-	rt_kprintf("Video PLLCLK : %d\n",               CLOCK_GetFreq(kCLOCK_VideoPllClk));
 }
 
 void dump_cc_info(void)

bsp/imxrt1052-evk/drivers/SConscript

@@ -8,34 +8,41 @@ cwd     = os.path.join(str(Dir('#')), 'drivers')
 src = Split("""
 board.c
 drv_uart.c
-hyper_flash_boot.c
-drv_sdram.c
 """)
 
 CPPPATH = [cwd]
 CPPDEFINES = []
 
+# add sdram driver code
+if GetDepend('RT_USING_SDRAM'):
+    src = src + ['./drv_sdram.c'] 
+
 if GetDepend('RT_USING_PIN'):
     src += ['drv_pin.c']
 
-if GetDepend('RT_USING_HP_RTC'):
+# add rtc driver code
-    src += ['drv_hp_rtc.c']
+if GetDepend('RT_USING_RTC_HP'):
+    src = src + ['./drv_rtc.c'] 
 
-if GetDepend('RT_USING_LWIP'):
+if GetDepend('BOARD_RT1050_EVK'):
+    src += ['hyper_flash_boot.c']
+
+    if GetDepend('RT_USING_LWIP'):
         src += ['drv_eth.c', 'fsl_phy.c']
         CPPDEFINES += ['FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE']
         
-if GetDepend('RT_USING_SDIO'):
+    if GetDepend('RT_USING_SDIO'):
         src += ['drv_sdio.c']
-if GetDepend('RT_USING_USB_DEVICE'):
+
+    if GetDepend('RT_USING_USB_DEVICE'):
         src += Glob('usb/phy/*.c')
         CPPDEFINES += ['ENDIANNESS']
         
-if GetDepend('RT_USING_USB_DEVICE'):
+    if GetDepend('RT_USING_USB_DEVICE'):
         src += ['drv_usbd.c']
         src += Glob('usb/device/*.c')
 
-if GetDepend('RT_USING_RTGUI') or GetDepend('PKG_USING_GUIENGINE'):
+    if GetDepend('RT_USING_RTGUI') or GetDepend('PKG_USING_GUIENGINE'):
         src += ['drv_lcd.c', 'drv_ft5406.c', 'drv_i2c.c']
 
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)

bsp/imxrt1052-evk/drivers/board.c

@@ -18,7 +18,9 @@
 #include "board.h"
 #include "drv_uart.h"
 
+#if defined(RT_USING_SDRAM) && defined(RT_USING_MEMHEAP_AS_HEAP)
 static struct rt_memheap system_heap;
+#endif
 
 /* ARM PLL configuration for RUN mode */
 const clock_arm_pll_config_t armPllConfig = { .loopDivider = 100U };
@@ -162,12 +164,14 @@ void rt_lowlevel_init(void)
 {
     BOARD_ConfigMPU();
 
+#if defined(RT_USING_SDRAM) 
     extern int imxrt_sdram_init(void);
     imxrt_sdram_init();
+#endif
 }
 
 /**
- * This function will initial LPC8XX board.
+ * This function will initial rt1050 board.
  */
 void rt_hw_board_init()
 {
@@ -184,11 +188,18 @@ void rt_hw_board_init()
 #endif
     
 #ifdef RT_USING_HEAP
+
+#if defined(RT_USING_SDRAM) && defined(RT_USING_MEMHEAP_AS_HEAP)
     rt_kprintf("sdram heap, begin: 0x%p, end: 0x%p\n", SDRAM_BEGIN, SDRAM_END);
-    rt_system_heap_init((void*)SDRAM_BEGIN, (void*)SDRAM_END);
+    rt_system_heap_init((void *)SDRAM_BEGIN, (void*)SDRAM_END); 
     
     rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END); 
     rt_memheap_init(&system_heap, "sram", (void *)HEAP_BEGIN, HEAP_SIZE); 
+#else
+    rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END); 
+    rt_system_heap_init((void *)HEAP_BEGIN, (void*)HEAP_END); 
+#endif
+    
 #endif
 }
 

bsp/imxrt1052-evk/drivers/drv_rtc.c

@@ -1,5 +1,5 @@
 /*
- * File      : drv_hp_rtc.c
+ * File      : drv_rtc.c
  * This file is part of RT-Thread RTOS
  * COPYRIGHT (C) 2006-2013, RT-Thread Development Team
  *
@@ -11,11 +11,12 @@
  * Date           Author       Notes
  * 2018-03-15     Liuguang     the first version.
  */
-#include "drv_hp_rtc.h" 
+#include "drv_rtc.h" 
-#include <time.h>
+
 #include "fsl_common.h" 
 #include "fsl_snvs_hp.h"
 #include "fsl_snvs_lp.h"
+#include <time.h>
 
 #ifdef RT_USING_RTC
 

bsp/imxrt1052-evk/drivers/drv_rtc.h

@@ -1,5 +1,5 @@
 /*
- * File      : drv_hp_rtc.h
+ * File      : drv_rtc.h
  * This file is part of RT-Thread RTOS
  * COPYRIGHT (C) 2006-2013, RT-Thread Development Team
  *

bsp/imxrt1052-evk/rtconfig.h

@@ -8,9 +8,7 @@
 
 #define RT_NAME_MAX 8
 #define RT_ALIGN_SIZE 4
-/* RT_THREAD_PRIORITY_8 is not set */
 #define RT_THREAD_PRIORITY_32
-/* RT_THREAD_PRIORITY_256 is not set */
 #define RT_THREAD_PRIORITY_MAX 32
 #define RT_TICK_PER_SECOND 100
 #define RT_DEBUG
@@ -19,7 +17,6 @@
 #define RT_DEBUG_THREAD 0
 #define RT_USING_HOOK
 #define IDLE_THREAD_STACK_SIZE 256
-/* RT_USING_TIMER_SOFT is not set */
 
 /* Inter-Thread communication */
 
@@ -28,26 +25,19 @@
 #define RT_USING_EVENT
 #define RT_USING_MAILBOX
 #define RT_USING_MESSAGEQUEUE
-/* RT_USING_SIGNALS is not set */
 
 /* Memory Management */
 
-/* RT_USING_MEMPOOL is not set */
 #define RT_USING_MEMHEAP
-/* RT_USING_NOHEAP is not set */
-/* RT_USING_SMALL_MEM is not set */
-/* RT_USING_SLAB is not set */
 #define RT_USING_MEMHEAP_AS_HEAP
 #define RT_USING_HEAP
 
 /* Kernel Device Object */
 
 #define RT_USING_DEVICE
-/* RT_USING_INTERRUPT_INFO is not set */
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-/* RT_USING_MODULE is not set */
 #define ARCH_ARM
 #define ARCH_ARM_CORTEX_M
 #define ARCH_ARM_CORTEX_M7
@@ -60,7 +50,6 @@
 
 /* C++ features */
 
-/* RT_USING_CPLUSPLUS is not set */
 
 /* Command shell */
 
@@ -73,10 +62,8 @@
 #define FINSH_THREAD_PRIORITY 20
 #define FINSH_THREAD_STACK_SIZE 4096
 #define FINSH_CMD_SIZE 80
-/* FINSH_USING_AUTH is not set */
 #define FINSH_USING_MSH
 #define FINSH_USING_MSH_DEFAULT
-/* FINSH_USING_MSH_ONLY is not set */
 
 /* Device virtual file system */
 
@@ -91,67 +78,38 @@
 
 #define RT_DFS_ELM_CODE_PAGE 437
 #define RT_DFS_ELM_WORD_ACCESS
-/* RT_DFS_ELM_USE_LFN_0 is not set */
-/* RT_DFS_ELM_USE_LFN_1 is not set */
-/* RT_DFS_ELM_USE_LFN_2 is not set */
 #define RT_DFS_ELM_USE_LFN_3
 #define RT_DFS_ELM_USE_LFN 3
 #define RT_DFS_ELM_MAX_LFN 255
 #define RT_DFS_ELM_DRIVES 2
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 512
-/* RT_DFS_ELM_USE_ERASE is not set */
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
-/* RT_USING_DFS_NET is not set */
-/* RT_USING_DFS_ROMFS is not set */
-/* RT_USING_DFS_RAMFS is not set */
-/* RT_USING_DFS_UFFS is not set */
-/* RT_USING_DFS_JFFS2 is not set */
-/* RT_USING_DFS_NFS is not set */
 
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
 #define RT_USING_SERIAL
-/* RT_USING_CAN is not set */
-/* RT_USING_HWTIMER is not set */
-/* RT_USING_CPUTIME is not set */
 #define RT_USING_I2C
 #define RT_USING_I2C_BITOPS
 #define RT_USING_PIN
-/* RT_USING_MTD_NOR is not set */
-/* RT_USING_MTD_NAND is not set */
 #define RT_USING_RTC
-/* RT_USING_SOFT_RTC is not set */
-/* RTC_SYNC_USING_NTP is not set */
 #define RT_USING_SDIO
-/* RT_USING_SPI is not set */
-/* RT_USING_WDT is not set */
-/* RT_USING_WIFI is not set */
 
 /* Using USB */
 
-/* RT_USING_USB_HOST is not set */
-/* RT_USING_USB_DEVICE is not set */
 
 /* POSIX layer and C standard library */
 
 #define RT_USING_LIBC
-/* RT_USING_PTHREADS is not set */
-/* RT_USING_POSIX is not set */
-/* HAVE_SYS_SIGNALS is not set */
 
 /* Network stack */
 
 /* light weight TCP/IP stack */
 
 #define RT_USING_LWIP
-/* RT_USING_LWIP141 is not set */
 #define RT_USING_LWIP202
-/* RT_USING_LWIP_IPV6 is not set */
-/* RT_LWIP_IGMP is not set */
 #define RT_LWIP_ICMP
-/* RT_LWIP_SNMP is not set */
 #define RT_LWIP_DNS
 #define RT_LWIP_DHCP
 #define IP_SOF_BROADCAST 1
@@ -164,8 +122,6 @@
 #define RT_LWIP_MSKADDR "255.255.255.0"
 #define RT_LWIP_UDP
 #define RT_LWIP_TCP
-/* RT_LWIP_RAW is not set */
-/* RT_LWIP_PPP is not set */
 #define RT_MEMP_NUM_NETCONN 8
 #define RT_LWIP_PBUF_NUM 16
 #define RT_LWIP_RAW_PCB_NUM 4
@@ -180,33 +136,24 @@
 #define RT_LWIP_ETHTHREAD_PRIORITY 12
 #define RT_LWIP_ETHTHREAD_STACKSIZE 1024
 #define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
-/* RT_LWIP_REASSEMBLY_FRAG is not set */
 #define LWIP_NETIF_STATUS_CALLBACK 1
 #define SO_REUSE 1
 #define LWIP_SO_RCVTIMEO 1
 #define LWIP_SO_SNDTIMEO 1
 #define LWIP_SO_RCVBUF 1
-/* RT_LWIP_NETIF_LOOPBACK is not set */
 #define LWIP_NETIF_LOOPBACK 0
 
 /* Modbus master and slave stack */
 
-/* RT_USING_MODBUS is not set */
-/* LWIP_USING_DHCPD is not set */
 
 /* VBUS(Virtual Software BUS) */
 
-/* RT_USING_VBUS is not set */
 
 /* Utilities */
 
-/* RT_USING_LOGTRACE is not set */
-/* RT_USING_RYM is not set */
 
 /* ARM CMSIS */
 
-/* RT_USING_CMSIS_OS is not set */
-/* RT_USING_RTT_CMSIS is not set */
 
 /* RT-Thread online packages */
 
@@ -214,72 +161,44 @@
 
 /* RT-Thread GUI Engine */
 
-/* PKG_USING_GUIENGINE is not set */
-/* PKG_USING_PERSIMMON is not set */
-/* PKG_USING_LWEXT4 is not set */
-/* PKG_USING_PARTITION is not set */
-/* PKG_USING_SQLITE is not set */
-/* PKG_USING_RTI is not set */
 
 /* IoT - internet of things */
 
-/* PKG_USING_PAHOMQTT is not set */
-/* PKG_USING_WEBCLIENT is not set */
-/* PKG_USING_MONGOOSE is not set */
-/* PKG_USING_WEBTERMINAL is not set */
-/* PKG_USING_CJSON is not set */
-/* PKG_USING_LJSON is not set */
-/* PKG_USING_EZXML is not set */
-/* PKG_USING_NANOPB is not set */
-/* PKG_USING_GAGENT_CLOUD is not set */
 
 /* Wi-Fi */
 
 /* Marvell WiFi */
 
-/* PKG_USING_WLANMARVELL is not set */
 
 /* Wiced WiFi */
 
-/* PKG_USING_WLAN_WICED is not set */
-/* PKG_USING_COAP is not set */
-/* PKG_USING_NOPOLL is not set */
-/* PKG_USING_NETUTILS is not set */
 
 /* security packages */
 
-/* PKG_USING_MBEDTLS is not set */
-/* PKG_USING_libsodium is not set */
-/* PKG_USING_TINYCRYPT is not set */
 
 /* language packages */
 
-/* PKG_USING_JERRYSCRIPT is not set */
-/* PKG_USING_MICROPYTHON is not set */
 
 /* multimedia packages */
 
-/* PKG_USING_OPENMV is not set */
 
 /* tools packages */
 
-/* PKG_USING_CMBACKTRACE is not set */
-/* PKG_USING_EASYLOGGER is not set */
-/* PKG_USING_SYSTEMVIEW is not set */
-/* PKG_USING_IPERF is not set */
 
 /* miscellaneous packages */
 
-/* PKG_USING_FASTLZ is not set */
-/* PKG_USING_MINILZO is not set */
-/* PKG_USING_QUICKLZ is not set */
 
 /* example package: hello */
 
-/* PKG_USING_HELLO is not set */
-/* PKG_USING_MULTIBUTTON is not set */
 #define SOC_IMXRT1052
+#define BOARD_RT1050_EVK
+
+/* RT1050_EVK Bsp Config */
+
+/* Select uart device */
+
 #define RT_USING_UART1
-#define RT_USING_HP_RTC
+#define RT_USING_SDRAM
+#define RT_USING_RTC_HP
 
 #endif