From 13c30f92696425d980c5b2712dd8f97f81861f0c Mon Sep 17 00:00:00 2001 From: aozima Date: Fri, 12 Jul 2013 23:32:48 +0800 Subject: [PATCH] update usart driver: use serial driver component. --- bsp/stm32f10x/drivers/SConscript | 1 - bsp/stm32f10x/drivers/board.h | 5 + bsp/stm32f10x/drivers/serial.c | 418 ------------------ bsp/stm32f10x/drivers/serial.h | 70 ---- bsp/stm32f10x/drivers/stm32f10x_it.c | 99 ----- bsp/stm32f10x/drivers/usart.c | 606 ++++++++++++++------------- bsp/stm32f10x/drivers/usart.h | 3 + bsp/stm32f10x/project.Uv2 | 41 +- bsp/stm32f10x/project.ewp | 23 +- bsp/stm32f10x/project.uvproj | 37 +- bsp/stm32f10x/rtconfig.h | 5 +- 11 files changed, 404 insertions(+), 904 deletions(-) delete mode 100644 bsp/stm32f10x/drivers/serial.c delete mode 100644 bsp/stm32f10x/drivers/serial.h diff --git a/bsp/stm32f10x/drivers/SConscript b/bsp/stm32f10x/drivers/SConscript index a09e059919..ef1e5a13fa 100644 --- a/bsp/stm32f10x/drivers/SConscript +++ b/bsp/stm32f10x/drivers/SConscript @@ -9,7 +9,6 @@ src = Split(""" board.c stm32f10x_it.c led.c -serial.c usart.c """) diff --git a/bsp/stm32f10x/drivers/board.h b/bsp/stm32f10x/drivers/board.h index b33e397954..dc84db9c69 100644 --- a/bsp/stm32f10x/drivers/board.h +++ b/bsp/stm32f10x/drivers/board.h @@ -37,6 +37,11 @@ #define STM32_SRAM_SIZE 64 #define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) +/* USART driver select. */ +#define RT_USING_UART1 +#define RT_USING_UART2 +#define RT_USING_UART3 + #endif /* __BOARD_H__ */ // <<< Use Configuration Wizard in Context Menu >>> diff --git a/bsp/stm32f10x/drivers/serial.c b/bsp/stm32f10x/drivers/serial.c deleted file mode 100644 index 13bf961e20..0000000000 --- a/bsp/stm32f10x/drivers/serial.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * File : serial.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-02-05 Bernard first version - * 2009-10-25 Bernard fix rt_serial_read bug when there is no data - * in the buffer. - * 2010-03-29 Bernard cleanup code. - */ - -#include "serial.h" -#include -#include - -static void rt_serial_enable_dma(DMA_Channel_TypeDef* dma_channel, - rt_uint32_t address, rt_uint32_t size); - -/** - * @addtogroup STM32 - */ -/*@{*/ - -/* RT-Thread Device Interface */ -static rt_err_t rt_serial_init (rt_device_t dev) -{ - struct stm32_serial_device* uart = (struct stm32_serial_device*) dev->user_data; - - if (!(dev->flag & RT_DEVICE_FLAG_ACTIVATED)) - { - if (dev->flag & RT_DEVICE_FLAG_INT_RX) - { - rt_memset(uart->int_rx->rx_buffer, 0, - sizeof(uart->int_rx->rx_buffer)); - uart->int_rx->read_index = 0; - uart->int_rx->save_index = 0; - } - - if (dev->flag & RT_DEVICE_FLAG_DMA_TX) - { - RT_ASSERT(uart->dma_tx->dma_channel != RT_NULL); - uart->dma_tx->list_head = uart->dma_tx->list_tail = RT_NULL; - - /* init data node memory pool */ - rt_mp_init(&(uart->dma_tx->data_node_mp), "dn", - uart->dma_tx->data_node_mem_pool, - sizeof(uart->dma_tx->data_node_mem_pool), - sizeof(struct stm32_serial_data_node)); - } - - /* Enable USART */ - USART_Cmd(uart->uart_device, ENABLE); - - dev->flag |= RT_DEVICE_FLAG_ACTIVATED; - } - - return RT_EOK; -} - -static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag) -{ - return RT_EOK; -} - -static rt_err_t rt_serial_close(rt_device_t dev) -{ - return RT_EOK; -} - -static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) -{ - rt_uint8_t* ptr; - rt_err_t err_code; - struct stm32_serial_device* uart; - - ptr = buffer; - err_code = RT_EOK; - uart = (struct stm32_serial_device*)dev->user_data; - - if (dev->flag & RT_DEVICE_FLAG_INT_RX) - { - /* interrupt mode Rx */ - while (size) - { - rt_base_t level; - - /* disable interrupt */ - level = rt_hw_interrupt_disable(); - - if (uart->int_rx->read_index != uart->int_rx->save_index) - { - /* read a character */ - *ptr++ = uart->int_rx->rx_buffer[uart->int_rx->read_index]; - size--; - - /* move to next position */ - uart->int_rx->read_index ++; - if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE) - uart->int_rx->read_index = 0; - } - else - { - /* set error code */ - err_code = -RT_EEMPTY; - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - break; - } - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - } - } - else - { - /* polling mode */ - while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size) - { - while (uart->uart_device->SR & USART_FLAG_RXNE) - { - *ptr = uart->uart_device->DR & 0xff; - ptr ++; - } - } - } - - /* set error code */ - rt_set_errno(err_code); - return (rt_uint32_t)ptr - (rt_uint32_t)buffer; -} - -static void rt_serial_enable_dma(DMA_Channel_TypeDef* dma_channel, - rt_uint32_t address, rt_uint32_t size) -{ - RT_ASSERT(dma_channel != RT_NULL); - - /* disable DMA */ - DMA_Cmd(dma_channel, DISABLE); - - /* set buffer address */ - dma_channel->CMAR = address; - /* set size */ - dma_channel->CNDTR = size; - - /* enable DMA */ - DMA_Cmd(dma_channel, ENABLE); -} - -static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) -{ - rt_uint8_t* ptr; - rt_err_t err_code; - struct stm32_serial_device* uart; - - err_code = RT_EOK; - ptr = (rt_uint8_t*)buffer; - uart = (struct stm32_serial_device*)dev->user_data; - - if (dev->flag & RT_DEVICE_FLAG_INT_TX) - { - /* interrupt mode Tx, does not support */ - RT_ASSERT(0); - } - else if (dev->flag & RT_DEVICE_FLAG_DMA_TX) - { - /* DMA mode Tx */ - - /* allocate a data node */ - struct stm32_serial_data_node* data_node = (struct stm32_serial_data_node*) - rt_mp_alloc (&(uart->dma_tx->data_node_mp), RT_WAITING_FOREVER); - if (data_node == RT_NULL) - { - /* set error code */ - err_code = -RT_ENOMEM; - } - else - { - rt_uint32_t level; - - /* fill data node */ - data_node->data_ptr = ptr; - data_node->data_size = size; - - /* insert to data link */ - data_node->next = RT_NULL; - - /* disable interrupt */ - level = rt_hw_interrupt_disable(); - - data_node->prev = uart->dma_tx->list_tail; - if (uart->dma_tx->list_tail != RT_NULL) - uart->dma_tx->list_tail->next = data_node; - uart->dma_tx->list_tail = data_node; - - if (uart->dma_tx->list_head == RT_NULL) - { - /* start DMA to transmit data */ - uart->dma_tx->list_head = data_node; - - /* Enable DMA Channel */ - rt_serial_enable_dma(uart->dma_tx->dma_channel, - (rt_uint32_t)uart->dma_tx->list_head->data_ptr, - uart->dma_tx->list_head->data_size); - } - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - } - } - else - { - /* polling mode */ - if (dev->flag & RT_DEVICE_FLAG_STREAM) - { - /* stream mode */ - while (size) - { - if (*ptr == '\n') - { - while (!(uart->uart_device->SR & USART_FLAG_TXE)); - uart->uart_device->DR = '\r'; - } - - while (!(uart->uart_device->SR & USART_FLAG_TXE)); - uart->uart_device->DR = (*ptr & 0x1FF); - - ++ptr; --size; - } - } - else - { - /* write data directly */ - while (size) - { - while (!(uart->uart_device->SR & USART_FLAG_TXE)); - uart->uart_device->DR = (*ptr & 0x1FF); - - ++ptr; --size; - } - } - } - - /* set error code */ - rt_set_errno(err_code); - - return (rt_uint32_t)ptr - (rt_uint32_t)buffer; -} - -static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args) -{ - struct stm32_serial_device* uart; - - RT_ASSERT(dev != RT_NULL); - - uart = (struct stm32_serial_device*)dev->user_data; - switch (cmd) - { - case RT_DEVICE_CTRL_SUSPEND: - /* suspend device */ - dev->flag |= RT_DEVICE_FLAG_SUSPENDED; - USART_Cmd(uart->uart_device, DISABLE); - break; - - case RT_DEVICE_CTRL_RESUME: - /* resume device */ - dev->flag &= ~RT_DEVICE_FLAG_SUSPENDED; - USART_Cmd(uart->uart_device, ENABLE); - break; - } - - return RT_EOK; -} - -/* - * serial register for STM32 - * support STM32F103VB and STM32F103ZE - */ -rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial) -{ - RT_ASSERT(device != RT_NULL); - - if ((flag & RT_DEVICE_FLAG_DMA_RX) || - (flag & RT_DEVICE_FLAG_INT_TX)) - { - RT_ASSERT(0); - } - - device->type = RT_Device_Class_Char; - device->rx_indicate = RT_NULL; - device->tx_complete = RT_NULL; - device->init = rt_serial_init; - device->open = rt_serial_open; - device->close = rt_serial_close; - device->read = rt_serial_read; - device->write = rt_serial_write; - device->control = rt_serial_control; - device->user_data = serial; - - /* register a character device */ - return rt_device_register(device, name, RT_DEVICE_FLAG_RDWR | flag); -} - -/* ISR for serial interrupt */ -void rt_hw_serial_isr(rt_device_t device) -{ - struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data; - - if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET) - { - /* interrupt mode receive */ - RT_ASSERT(device->flag & RT_DEVICE_FLAG_INT_RX); - - /* save on rx buffer */ - while (uart->uart_device->SR & USART_FLAG_RXNE) - { - rt_base_t level; - - /* disable interrupt */ - level = rt_hw_interrupt_disable(); - - /* save character */ - uart->int_rx->rx_buffer[uart->int_rx->save_index] = uart->uart_device->DR & 0xff; - uart->int_rx->save_index ++; - if (uart->int_rx->save_index >= UART_RX_BUFFER_SIZE) - uart->int_rx->save_index = 0; - - /* if the next position is read index, discard this 'read char' */ - if (uart->int_rx->save_index == uart->int_rx->read_index) - { - uart->int_rx->read_index ++; - if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE) - uart->int_rx->read_index = 0; - } - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - } - - /* clear interrupt */ - USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE); - - /* invoke callback */ - if (device->rx_indicate != RT_NULL) - { - rt_size_t rx_length; - - /* get rx length */ - rx_length = uart->int_rx->read_index > uart->int_rx->save_index ? - UART_RX_BUFFER_SIZE - uart->int_rx->read_index + uart->int_rx->save_index : - uart->int_rx->save_index - uart->int_rx->read_index; - - device->rx_indicate(device, rx_length); - } - } - - if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET) - { - /* clear interrupt */ - USART_ClearITPendingBit(uart->uart_device, USART_IT_TC); - } -} - -/* - * ISR for DMA mode Tx - */ -void rt_hw_serial_dma_tx_isr(rt_device_t device) -{ - rt_uint32_t level; - struct stm32_serial_data_node* data_node; - struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data; - - /* DMA mode receive */ - RT_ASSERT(device->flag & RT_DEVICE_FLAG_DMA_TX); - - /* get the first data node */ - data_node = uart->dma_tx->list_head; - RT_ASSERT(data_node != RT_NULL); - - /* invoke call to notify tx complete */ - if (device->tx_complete != RT_NULL) - device->tx_complete(device, data_node->data_ptr); - - /* disable interrupt */ - level = rt_hw_interrupt_disable(); - - /* remove list head */ - uart->dma_tx->list_head = data_node->next; - if (uart->dma_tx->list_head == RT_NULL) /* data link empty */ - uart->dma_tx->list_tail = RT_NULL; - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - - /* release data node memory */ - rt_mp_free(data_node); - - if (uart->dma_tx->list_head != RT_NULL) - { - /* transmit next data node */ - rt_serial_enable_dma(uart->dma_tx->dma_channel, - (rt_uint32_t)uart->dma_tx->list_head->data_ptr, - uart->dma_tx->list_head->data_size); - } - else - { - /* no data to be transmitted, disable DMA */ - DMA_Cmd(uart->dma_tx->dma_channel, DISABLE); - } -} - -/*@}*/ diff --git a/bsp/stm32f10x/drivers/serial.h b/bsp/stm32f10x/drivers/serial.h deleted file mode 100644 index 54da702a0e..0000000000 --- a/bsp/stm32f10x/drivers/serial.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * File : serial.h - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009 - 2010, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-01-05 Bernard first version - * 2010-03-29 Bernard remove interrupt tx and DMA rx mode. - */ -#ifndef __RT_HW_SERIAL_H__ -#define __RT_HW_SERIAL_H__ - -#include -#include - -/* STM32F10x library definitions */ -#include - -#define UART_RX_BUFFER_SIZE 64 -#define UART_TX_DMA_NODE_SIZE 4 - -/* data node for Tx Mode */ -struct stm32_serial_data_node -{ - rt_uint8_t *data_ptr; - rt_size_t data_size; - struct stm32_serial_data_node *next, *prev; -}; -struct stm32_serial_dma_tx -{ - /* DMA Channel */ - DMA_Channel_TypeDef* dma_channel; - - /* data list head and tail */ - struct stm32_serial_data_node *list_head, *list_tail; - - /* data node memory pool */ - struct rt_mempool data_node_mp; - rt_uint8_t data_node_mem_pool[UART_TX_DMA_NODE_SIZE * - (sizeof(struct stm32_serial_data_node) + sizeof(void*))]; -}; - -struct stm32_serial_int_rx -{ - rt_uint8_t rx_buffer[UART_RX_BUFFER_SIZE]; - rt_uint32_t read_index, save_index; -}; - -struct stm32_serial_device -{ - USART_TypeDef* uart_device; - - /* rx structure */ - struct stm32_serial_int_rx* int_rx; - - /* tx structure */ - struct stm32_serial_dma_tx* dma_tx; -}; - -rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial); - -void rt_hw_serial_isr(rt_device_t device); -void rt_hw_serial_dma_tx_isr(rt_device_t device); - -#endif diff --git a/bsp/stm32f10x/drivers/stm32f10x_it.c b/bsp/stm32f10x/drivers/stm32f10x_it.c index f521dab52a..bf5cf55565 100644 --- a/bsp/stm32f10x/drivers/stm32f10x_it.c +++ b/bsp/stm32f10x/drivers/stm32f10x_it.c @@ -119,105 +119,6 @@ void DebugMon_Handler(void) /* file (startup_stm32f10x_xx.s). */ /******************************************************************************/ -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -#ifdef RT_USING_UART3 - extern struct rt_device uart3_device; - extern void rt_hw_serial_dma_tx_isr(struct rt_device *device); - - /* enter interrupt */ - rt_interrupt_enter(); - - if (DMA_GetITStatus(DMA1_IT_TC2)) - { - /* transmission complete, invoke serial dma tx isr */ - rt_hw_serial_dma_tx_isr(&uart3_device); - } - - /* clear DMA flag */ - DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2); - - /* leave interrupt */ - rt_interrupt_leave(); -#endif -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -#ifdef RT_USING_UART1 - extern struct rt_device uart1_device; - extern void rt_hw_serial_isr(struct rt_device *device); - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart1_device); - - /* leave interrupt */ - rt_interrupt_leave(); -#endif -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -#ifdef RT_USING_UART2 - extern struct rt_device uart2_device; - extern void rt_hw_serial_isr(struct rt_device *device); - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart2_device); - - /* leave interrupt */ - rt_interrupt_leave(); -#endif -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -#ifdef RT_USING_UART3 - extern struct rt_device uart3_device; - extern void rt_hw_serial_isr(struct rt_device *device); - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart3_device); - - /* leave interrupt */ - rt_interrupt_leave(); -#endif -} - #ifdef RT_USING_LWIP /******************************************************************************* * Function Name : EXTI4_IRQHandler diff --git a/bsp/stm32f10x/drivers/usart.c b/bsp/stm32f10x/drivers/usart.c index 90a8d500da..ae47db3a14 100644 --- a/bsp/stm32f10x/drivers/usart.c +++ b/bsp/stm32f10x/drivers/usart.c @@ -1,7 +1,7 @@ /* * File : usart.c * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2009, RT-Thread Development Team + * COPYRIGHT (C) 2006-2013, RT-Thread Development Team * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at @@ -11,335 +11,365 @@ * Date Author Notes * 2009-01-05 Bernard the first version * 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode + * 2013-05-13 aozima update for kehong-lingtai. */ +#include "stm32f10x.h" #include "usart.h" -#include -#include +#include "board.h" -/* - * Use UART1 as console output and finsh input - * interrupt Rx and poll Tx (stream mode) - * - * Use UART2 with interrupt Rx and poll Tx - * Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2 - * - * USART DMA setting on STM32 - * USART1 Tx --> DMA Channel 4 - * USART1 Rx --> DMA Channel 5 - * USART2 Tx --> DMA Channel 7 - * USART2 Rx --> DMA Channel 6 - * USART3 Tx --> DMA Channel 2 - * USART3 Rx --> DMA Channel 3 - */ +#include -#ifdef RT_USING_UART1 -struct stm32_serial_int_rx uart1_int_rx; -struct stm32_serial_device uart1 = -{ - USART1, - &uart1_int_rx, - RT_NULL -}; -struct rt_device uart1_device; -#endif - -#ifdef RT_USING_UART2 -struct stm32_serial_int_rx uart2_int_rx; -struct stm32_serial_device uart2 = -{ - USART2, - &uart2_int_rx, - RT_NULL -}; -struct rt_device uart2_device; -#endif - -#ifdef RT_USING_UART3 -struct stm32_serial_int_rx uart3_int_rx; -struct stm32_serial_dma_tx uart3_dma_tx; -struct stm32_serial_device uart3 = -{ - USART3, - &uart3_int_rx, - &uart3_dma_tx -}; -struct rt_device uart3_device; -#endif - -#define USART1_DR_Base 0x40013804 -#define USART2_DR_Base 0x40004404 -#define USART3_DR_Base 0x40004804 - -/* USART1_REMAP = 0 */ +/* USART1 */ #define UART1_GPIO_TX GPIO_Pin_9 #define UART1_GPIO_RX GPIO_Pin_10 #define UART1_GPIO GPIOA -#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1 -#define UART1_TX_DMA DMA1_Channel4 -#define UART1_RX_DMA DMA1_Channel5 -#if defined(STM32F10X_LD) || defined(STM32F10X_MD) || defined(STM32F10X_CL) -#define UART2_GPIO_TX GPIO_Pin_5 -#define UART2_GPIO_RX GPIO_Pin_6 -#define UART2_GPIO GPIOD -#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2 -#else /* for STM32F10X_HD */ -/* USART2_REMAP = 0 */ -#define UART2_GPIO_TX GPIO_Pin_2 -#define UART2_GPIO_RX GPIO_Pin_3 -#define UART2_GPIO GPIOA -#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2 -#define UART2_TX_DMA DMA1_Channel7 -#define UART2_RX_DMA DMA1_Channel6 -#endif +/* USART2 */ +#define UART2_GPIO_TX GPIO_Pin_2 +#define UART2_GPIO_RX GPIO_Pin_3 +#define UART2_GPIO GPIOA /* USART3_REMAP[1:0] = 00 */ -#define UART3_GPIO_RX GPIO_Pin_11 #define UART3_GPIO_TX GPIO_Pin_10 +#define UART3_GPIO_RX GPIO_Pin_11 #define UART3_GPIO GPIOB -#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3 -#define UART3_TX_DMA DMA1_Channel2 -#define UART3_RX_DMA DMA1_Channel3 + +/* STM32 uart driver */ +struct stm32_uart +{ + USART_TypeDef* uart_device; + IRQn_Type irq; +}; + +static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg) +{ + struct stm32_uart* uart; + USART_InitTypeDef USART_InitStructure; + + RT_ASSERT(serial != RT_NULL); + RT_ASSERT(cfg != RT_NULL); + + uart = (struct stm32_uart *)serial->parent.user_data; + + USART_InitStructure.USART_BaudRate = cfg->baud_rate; + + if (cfg->data_bits == DATA_BITS_8) + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + + if (cfg->stop_bits == STOP_BITS_1) + USART_InitStructure.USART_StopBits = USART_StopBits_1; + else if (cfg->stop_bits == STOP_BITS_2) + USART_InitStructure.USART_StopBits = USART_StopBits_2; + + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_Init(uart->uart_device, &USART_InitStructure); + + /* Enable USART */ + USART_Cmd(uart->uart_device, ENABLE); + /* enable interrupt */ + USART_ITConfig(uart->uart_device, USART_IT_RXNE, ENABLE); + + return RT_EOK; +} + +static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg) +{ + struct stm32_uart* uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct stm32_uart *)serial->parent.user_data; + + switch (cmd) + { + case RT_DEVICE_CTRL_CLR_INT: + /* disable rx irq */ + UART_DISABLE_IRQ(uart->irq); + break; + case RT_DEVICE_CTRL_SET_INT: + /* enable rx irq */ + UART_ENABLE_IRQ(uart->irq); + break; + } + + return RT_EOK; +} + +static int stm32_putc(struct rt_serial_device *serial, char c) +{ + struct stm32_uart* uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct stm32_uart *)serial->parent.user_data; + + while (!(uart->uart_device->SR & USART_FLAG_TXE)); + uart->uart_device->DR = c; + + return 1; +} + +static int stm32_getc(struct rt_serial_device *serial) +{ + int ch; + struct stm32_uart* uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct stm32_uart *)serial->parent.user_data; + + ch = -1; + if (uart->uart_device->SR & USART_FLAG_RXNE) + { + ch = uart->uart_device->DR & 0xff; + } + + return ch; +} + +static const struct rt_uart_ops stm32_uart_ops = +{ + stm32_configure, + stm32_control, + stm32_putc, + stm32_getc, +}; + +#if defined(RT_USING_UART1) +/* UART1 device driver structure */ +struct serial_ringbuffer uart1_int_rx; +struct stm32_uart uart1 = +{ + USART1, + USART1_IRQn, +}; +struct rt_serial_device serial1; + +void USART1_IRQHandler(void) +{ + struct stm32_uart* uart; + + uart = &uart1; + + /* enter interrupt */ + rt_interrupt_enter(); + if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET) + { + rt_hw_serial_isr(&serial1); + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE); + } + if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET) + { + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_TC); + } + + /* leave interrupt */ + rt_interrupt_leave(); +} +#endif /* RT_USING_UART1 */ + +#if defined(RT_USING_UART2) +/* UART1 device driver structure */ +struct serial_ringbuffer uart2_int_rx; +struct stm32_uart uart2 = +{ + USART2, + USART2_IRQn, +}; +struct rt_serial_device serial2; + +void USART2_IRQHandler(void) +{ + struct stm32_uart* uart; + + uart = &uart2; + + /* enter interrupt */ + rt_interrupt_enter(); + if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET) + { + rt_hw_serial_isr(&serial2); + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE); + } + if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET) + { + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_TC); + } + + /* leave interrupt */ + rt_interrupt_leave(); +} +#endif /* RT_USING_UART2 */ + +#if defined(RT_USING_UART3) +/* UART1 device driver structure */ +struct serial_ringbuffer uart3_int_rx; +struct stm32_uart uart3 = +{ + USART3, + USART3_IRQn, +}; +struct rt_serial_device serial3; + +void USART3_IRQHandler(void) +{ + struct stm32_uart* uart; + + uart = &uart3; + + /* enter interrupt */ + rt_interrupt_enter(); + if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET) + { + rt_hw_serial_isr(&serial3); + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE); + } + if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET) + { + /* clear interrupt */ + USART_ClearITPendingBit(uart->uart_device, USART_IT_TC); + } + + /* leave interrupt */ + rt_interrupt_leave(); +} +#endif /* RT_USING_UART3 */ static void RCC_Configuration(void) { - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); - #ifdef RT_USING_UART1 - /* Enable USART1 and GPIOA clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); -#endif + /* Enable UART GPIO clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + /* Enable UART clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE); +#endif /* RT_USING_UART1 */ #ifdef RT_USING_UART2 - -#if (defined(STM32F10X_LD) || defined(STM32F10X_MD) || defined(STM32F10X_CL)) - /* Enable AFIO and GPIOD clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOD, ENABLE); - - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#else - /* Enable AFIO and GPIOA clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA, ENABLE); -#endif - - /* Enable USART2 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); -#endif + /* Enable UART GPIO clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + /* Enable UART clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); +#endif /* RT_USING_UART2 */ #ifdef RT_USING_UART3 - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); - /* Enable USART3 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE); - - /* DMA clock enable */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); -#endif + /* Enable UART GPIO clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + /* Enable UART clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE); +#endif /* RT_USING_UART3 */ } static void GPIO_Configuration(void) { - GPIO_InitTypeDef GPIO_InitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; #ifdef RT_USING_UART1 - /* Configure USART1 Rx (PA.10) as input floating */ - GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART1_GPIO, &GPIO_InitStructure); + /* Configure USART Rx/tx PIN */ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX; + GPIO_Init(UART1_GPIO, &GPIO_InitStructure); - /* Configure USART1 Tx (PA.09) as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(UART1_GPIO, &GPIO_InitStructure); -#endif + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX; + GPIO_Init(UART1_GPIO, &GPIO_InitStructure); +#endif /* RT_USING_UART1 */ #ifdef RT_USING_UART2 - /* Configure USART2 Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART2_GPIO, &GPIO_InitStructure); + /* Configure USART Rx/tx PIN */ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX; + GPIO_Init(UART1_GPIO, &GPIO_InitStructure); - /* Configure USART2 Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(UART2_GPIO, &GPIO_InitStructure); -#endif + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX; + GPIO_Init(UART2_GPIO, &GPIO_InitStructure); +#endif /* RT_USING_UART2 */ #ifdef RT_USING_UART3 - /* Configure USART3 Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART3_GPIO, &GPIO_InitStructure); + /* Configure USART Rx/tx PIN */ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX; + GPIO_Init(UART3_GPIO, &GPIO_InitStructure); - /* Configure USART3 Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(UART3_GPIO, &GPIO_InitStructure); -#endif + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX; + GPIO_Init(UART3_GPIO, &GPIO_InitStructure); +#endif /* RT_USING_UART3 */ } -static void NVIC_Configuration(void) +static void NVIC_Configuration(struct stm32_uart* uart) { - NVIC_InitTypeDef NVIC_InitStructure; + NVIC_InitTypeDef NVIC_InitStructure; + + /* Enable the USART1 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = uart->irq; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void rt_hw_usart_init(void) +{ + struct stm32_uart* uart; + struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT; + + RCC_Configuration(); + GPIO_Configuration(); #ifdef RT_USING_UART1 - /* Enable the USART1 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif + uart = &uart1; + config.baud_rate = BAUD_RATE_115200; + + serial1.ops = &stm32_uart_ops; + serial1.int_rx = &uart1_int_rx; + serial1.config = config; + + NVIC_Configuration(&uart1); + + /* register UART1 device */ + rt_hw_serial_register(&serial1, "uart1", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, + uart); +#endif /* RT_USING_UART1 */ #ifdef RT_USING_UART2 - /* Enable the USART2 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif + uart = &uart2; + + config.baud_rate = BAUD_RATE_115200; + serial2.ops = &stm32_uart_ops; + serial2.int_rx = &uart2_int_rx; + serial2.config = config; + + NVIC_Configuration(&uart2); + + /* register UART1 device */ + rt_hw_serial_register(&serial2, "uart2", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, + uart); +#endif /* RT_USING_UART2 */ #ifdef RT_USING_UART3 - /* Enable the USART3 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); + uart = &uart3; - /* Enable the DMA1 Channel2 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel2_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif -} - -static void DMA_Configuration(void) -{ -#if defined (RT_USING_UART3) - DMA_InitTypeDef DMA_InitStructure; - - /* fill init structure */ - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - - /* DMA1 Channel5 (triggered by USART3 Tx event) Config */ - DMA_DeInit(UART3_TX_DMA); - DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; - /* As we will set them before DMA actually enabled, the DMA_MemoryBaseAddr - * and DMA_BufferSize are meaningless. So just set them to proper values - * which could make DMA_Init happy. - */ - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0; - DMA_InitStructure.DMA_BufferSize = 1; - DMA_Init(UART3_TX_DMA, &DMA_InitStructure); - DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE); - DMA_ClearFlag(DMA1_FLAG_TC2); -#endif -} - -/* - * Init all related hardware in here - * rt_hw_serial_init() will register all supported USART device - */ -void rt_hw_usart_init() -{ - USART_InitTypeDef USART_InitStructure; - USART_ClockInitTypeDef USART_ClockInitStructure; - - RCC_Configuration(); - - GPIO_Configuration(); - - NVIC_Configuration(); - - DMA_Configuration(); - - /* uart init */ -#ifdef RT_USING_UART1 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART1, &USART_InitStructure); - USART_ClockInit(USART1, &USART_ClockInitStructure); - - /* register uart1 */ - rt_hw_serial_register(&uart1_device, "uart1", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, - &uart1); - - /* enable interrupt */ - USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); -#endif - -#ifdef RT_USING_UART2 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART2, &USART_InitStructure); - USART_ClockInit(USART2, &USART_ClockInitStructure); - - /* register uart2 */ - rt_hw_serial_register(&uart2_device, "uart2", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, - &uart2); - - /* Enable USART2 DMA Rx request */ - USART_ITConfig(USART2, USART_IT_RXNE, ENABLE); -#endif - -#ifdef RT_USING_UART3 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART3, &USART_InitStructure); - USART_ClockInit(USART3, &USART_ClockInitStructure); - - uart3_dma_tx.dma_channel= UART3_TX_DMA; - - /* register uart3 */ - rt_hw_serial_register(&uart3_device, "uart3", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX, - &uart3); - - /* Enable USART3 DMA Tx request */ - USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE); - - /* enable interrupt */ - USART_ITConfig(USART3, USART_IT_RXNE, ENABLE); -#endif + config.baud_rate = BAUD_RATE_115200; + + serial3.ops = &stm32_uart_ops; + serial3.int_rx = &uart3_int_rx; + serial3.config = config; + + NVIC_Configuration(&uart3); + + /* register UART1 device */ + rt_hw_serial_register(&serial3, "uart3", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, + uart); +#endif /* RT_USING_UART3 */ } diff --git a/bsp/stm32f10x/drivers/usart.h b/bsp/stm32f10x/drivers/usart.h index 48925df880..438578d86b 100644 --- a/bsp/stm32f10x/drivers/usart.h +++ b/bsp/stm32f10x/drivers/usart.h @@ -18,6 +18,9 @@ #include #include +#define UART_ENABLE_IRQ(n) NVIC_EnableIRQ((n)) +#define UART_DISABLE_IRQ(n) NVIC_DisableIRQ((n)) + void rt_hw_usart_init(void); #endif diff --git a/bsp/stm32f10x/project.Uv2 b/bsp/stm32f10x/project.Uv2 index d38d5aa614..05ab3d45a4 100644 --- a/bsp/stm32f10x/project.Uv2 +++ b/bsp/stm32f10x/project.Uv2 @@ -8,6 +8,7 @@ Group (Drivers) Group (STM32_StdPeriph) Group (Kernel) Group (CORTEX-M3) +Group (DeviceDrivers) Group (finsh) Group (Components) @@ -16,7 +17,6 @@ File 1,1, File 2,1, File 2,1, File 2,1, -File 2,1, File 2,1, File 3,1, File 3,1, @@ -60,22 +60,27 @@ File 5,2,<..\..\libcpu\arm\cortex-m3\context_rvds.S> File 5,1,<..\..\libcpu\arm\common\backtrace.c> File 5,1,<..\..\libcpu\arm\common\div0.c> File 5,1,<..\..\libcpu\arm\common\showmem.c> -File 6,1,<..\..\components\finsh\cmd.c> -File 6,1,<..\..\components\finsh\finsh_compiler.c> -File 6,1,<..\..\components\finsh\finsh_error.c> -File 6,1,<..\..\components\finsh\finsh_heap.c> -File 6,1,<..\..\components\finsh\finsh_init.c> -File 6,1,<..\..\components\finsh\finsh_node.c> -File 6,1,<..\..\components\finsh\finsh_ops.c> -File 6,1,<..\..\components\finsh\finsh_parser.c> -File 6,1,<..\..\components\finsh\finsh_token.c> -File 6,1,<..\..\components\finsh\finsh_var.c> -File 6,1,<..\..\components\finsh\finsh_vm.c> -File 6,1,<..\..\components\finsh\msh.c> -File 6,1,<..\..\components\finsh\msh_cmd.c> -File 6,1,<..\..\components\finsh\shell.c> -File 6,1,<..\..\components\finsh\symbol.c> -File 7,1,<..\..\components\init\components.c> +File 6,1,<..\..\components\drivers\serial\serial.c> +File 6,1,<..\..\components\drivers\src\completion.c> +File 6,1,<..\..\components\drivers\src\dataqueue.c> +File 6,1,<..\..\components\drivers\src\pipe.c> +File 6,1,<..\..\components\drivers\src\ringbuffer.c> +File 7,1,<..\..\components\finsh\cmd.c> +File 7,1,<..\..\components\finsh\finsh_compiler.c> +File 7,1,<..\..\components\finsh\finsh_error.c> +File 7,1,<..\..\components\finsh\finsh_heap.c> +File 7,1,<..\..\components\finsh\finsh_init.c> +File 7,1,<..\..\components\finsh\finsh_node.c> +File 7,1,<..\..\components\finsh\finsh_ops.c> +File 7,1,<..\..\components\finsh\finsh_parser.c> +File 7,1,<..\..\components\finsh\finsh_token.c> +File 7,1,<..\..\components\finsh\finsh_var.c> +File 7,1,<..\..\components\finsh\finsh_vm.c> +File 7,1,<..\..\components\finsh\msh.c> +File 7,1,<..\..\components\finsh\msh_cmd.c> +File 7,1,<..\..\components\finsh\shell.c> +File 7,1,<..\..\components\finsh\symbol.c> +File 8,1,<..\..\components\init\components.c> @@ -138,7 +143,7 @@ Options 1,0,0 // Target 'RT-Thread STM32' ADSCMISC () ADSCDEFN (STM32F10X_HD, USE_STDPERIPH_DRIVER) ADSCUDEF () - ADSCINCD (Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\include;drivers;..\..\components\CMSIS\Include;.;applications;..\..\libcpu\arm\cortex-m3;..\..\libcpu\arm\common;..\..\components\init;..\..\components\finsh;Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x) + ADSCINCD (Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\include;drivers;..\..\components\CMSIS\Include;.;applications;..\..\libcpu\arm\cortex-m3;..\..\components\drivers\include;..\..\libcpu\arm\common;..\..\components\init;..\..\components\finsh;Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x) ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } ADSAMISC () ADSADEFN () diff --git a/bsp/stm32f10x/project.ewp b/bsp/stm32f10x/project.ewp index 947313db41..4281b8a337 100644 --- a/bsp/stm32f10x/project.ewp +++ b/bsp/stm32f10x/project.ewp @@ -307,6 +307,7 @@ $PROJ_DIR$\. $PROJ_DIR$\applications $PROJ_DIR$\..\..\libcpu\arm\cortex-m3 + $PROJ_DIR$\..\..\components\drivers\include $PROJ_DIR$\..\..\libcpu\arm\common $PROJ_DIR$\..\..\components\init $PROJ_DIR$\..\..\components\finsh @@ -1236,6 +1237,7 @@ $PROJ_DIR$\. $PROJ_DIR$\applications $PROJ_DIR$\..\..\libcpu\arm\cortex-m3 + $PROJ_DIR$\..\..\components\drivers\include $PROJ_DIR$\..\..\libcpu\arm\common $PROJ_DIR$\..\..\components\init $PROJ_DIR$\..\..\components\finsh @@ -1893,6 +1895,24 @@ $PROJ_DIR$\..\..\libcpu\arm\common\showmem.c + + DeviceDrivers + + $PROJ_DIR$\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\components\drivers\serial\serial.c + + Drivers @@ -1901,9 +1921,6 @@ $PROJ_DIR$\drivers\led.c - - $PROJ_DIR$\drivers\serial.c - $PROJ_DIR$\drivers\stm32f10x_it.c diff --git a/bsp/stm32f10x/project.uvproj b/bsp/stm32f10x/project.uvproj index 32ac174066..95923b3e99 100644 --- a/bsp/stm32f10x/project.uvproj +++ b/bsp/stm32f10x/project.uvproj @@ -351,7 +351,7 @@ STM32F10X_HD, USE_STDPERIPH_DRIVER - .;..\..\components\CMSIS\Include;..\..\components\finsh;..\..\components\init;..\..\include;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m3;Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;Libraries\STM32F10x_StdPeriph_Driver\inc;applications;drivers + .;..\..\components\CMSIS\Include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\init;..\..\include;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m3;Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x;Libraries\STM32F10x_StdPeriph_Driver\inc;applications;drivers @@ -422,11 +422,6 @@ 1 drivers\led.c - - serial.c - 1 - drivers\serial.c - usart.c 1 @@ -659,6 +654,36 @@ + + DeviceDrivers + + + serial.c + 1 + ..\..\components\drivers\serial\serial.c + + + completion.c + 1 + ..\..\components\drivers\src\completion.c + + + dataqueue.c + 1 + ..\..\components\drivers\src\dataqueue.c + + + pipe.c + 1 + ..\..\components\drivers\src\pipe.c + + + ringbuffer.c + 1 + ..\..\components\drivers\src\ringbuffer.c + + + finsh diff --git a/bsp/stm32f10x/rtconfig.h b/bsp/stm32f10x/rtconfig.h index 2fe7a0ca41..1223f3dfb5 100644 --- a/bsp/stm32f10x/rtconfig.h +++ b/bsp/stm32f10x/rtconfig.h @@ -62,7 +62,10 @@ /* SECTION: Device System */ /* Using Device System */ #define RT_USING_DEVICE -#define RT_USING_UART1 +// +#define RT_USING_DEVICE_IPC +// +#define RT_USING_SERIAL /* SECTION: Console options */ #define RT_USING_CONSOLE