Merge pull request #2816 from Guozhanxin/freemodebus
[components] move freemodbus to package.|将freemodbus移到软件包。
This commit is contained in:
commit
1394700281
|
@ -446,8 +446,6 @@ config RT_USING_LWIP
|
|||
|
||||
endmenu
|
||||
|
||||
source "$RTT_DIR/components/net/freemodbus/Kconfig"
|
||||
|
||||
source "$RTT_DIR/components/net/at/Kconfig"
|
||||
|
||||
if RT_USING_LWIP
|
||||
|
|
|
@ -1,329 +0,0 @@
|
|||
2013-10-17 (REL_1_6_0) Armink <armink.ztl@gmail.com>
|
||||
Notes: Added modbus master.
|
||||
|
||||
2010-05-06 (REL_1_5_0) Christian Walter <cwalter@embedded-solutions.at>
|
||||
Notes: Added support for Atmel AT91SAM3S (Cortex M3) for IAR.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES (ATSAM3S) : Added new port.
|
||||
|
||||
2007-08-28 (REL_1_4_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added support for HCS08. Fixed some small bugs in the documentation
|
||||
for the porting layer.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES (HCS08) : Added new port.
|
||||
- BUGS (ALL) : Fixed some small bugs in the porting guide.
|
||||
|
||||
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added ARM7/AT91SAM7X port. Added Linux/TCP port from Steven Guo.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES (ARM7): Added ARM7/AT91SAM7x port.
|
||||
- FEATURES (LINUX): Added Linux/TCP port from Steven Guo.
|
||||
- BUGS (ALL): Fixed bug in <eMBFuncReadInputRegister> where the high
|
||||
byte of the register count was ignored. This does not have a
|
||||
practical impact because the actual number of registers is always
|
||||
lower.
|
||||
|
||||
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added Linux/TCP port. Fixed bug in MSP430 port.
|
||||
Detailted notes:
|
||||
- FEATURE (LINUX): Added Linux/TCP port.
|
||||
- BUGS (MSP430): Fixed bug with calculating the timer value.
|
||||
|
||||
2007-04-25 (REL_1_2_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added LPC214X ARM port with Keil compiler. Added Z8Encore port for
|
||||
Z8F6422 microcontroller.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURE (ARM): Added LPC214X ARM port for Keil ARM 2.41.
|
||||
- FEATURE (Z8ENCORE): Added Z8F6422 for Z8Encore using the ZDS II - Z8
|
||||
Encore! development tools.
|
||||
|
||||
2007-02-18 (REL_1_1_2) Christian Walter <wolti@sil.at>:
|
||||
Notes: Fixed typo with the defined defining the supported Modbus
|
||||
functions. Fixed bug when illegal slave address was passed to eMBInit
|
||||
where the error was not detected. Fixed typo in the holding registers
|
||||
where the frame for write multiple registers was parsed with the wrong
|
||||
constants. The fix is not critical because the values matched. Fixed bug
|
||||
in discrete input registers implementation where the frame was not parsed
|
||||
correctly. Added new support for a CodeWarrior Coldfire port.
|
||||
|
||||
Detailed notes:
|
||||
- BUG (ALL): Modbus functions are compiled into the stack conditionally
|
||||
by changing the MB_FUNC_XXX defines to either true(1) or false(0).
|
||||
The defines for MB_FUNC_READ_HOLDING and MB_FUNC_WRITE_HOLDING
|
||||
were wrong.
|
||||
- BUG (ALL): eMBInit did not correctly check for addresses. Therefore
|
||||
is was possible to start the Modbus stack with an address of 0
|
||||
or one > 247.
|
||||
- BUG (ALL): eMBFuncWriteHoldingRegister should use
|
||||
MB_PDU_FUNC_WRITE_MUL_ADDR_OFF and not MB_PDU_FUNC_READ_ADDR_OFF.
|
||||
- BUG (ALL): eMBFuncReadDiscreteInputs calculated the number of discrete
|
||||
registers to read wrong.
|
||||
- FEATURE (ALL): Fixed some warnings in the code.
|
||||
|
||||
2006-11-19 (REL_1_1_1) Christian Walter <wolti@sil.at>:
|
||||
Notes: Fixed bug in Read/Write Multiple Registers function where
|
||||
the registers addresses where calculated wrong.
|
||||
Fixed bug in RTU and ASCII with the resource allocation in case of
|
||||
an error.
|
||||
Changed license to BSD style licsense.
|
||||
|
||||
Detailed notes:
|
||||
- OTHER (ALL): License is now BSD for protocol stack.
|
||||
- BUG (ALL): The registers address received in a Modbus frame
|
||||
must be converted to application addresses. The code for this
|
||||
conversion was missing and therefore has lead to error when
|
||||
this function was used (Registers of by one, Start at > 1).
|
||||
- BUG (ALL): If the serial initialization within the porting fails
|
||||
a timer is still allocated in eMBRTUInit and eMBASCIIInit. This
|
||||
can lead to a memory leak depending upon the implementation of the
|
||||
porting layer.
|
||||
- FEATURE (MCF5235): Added sample shell scripts for testing.
|
||||
- FEATURE (MSP430): Added sample shell script for testing and
|
||||
changed default values to match the other ports.
|
||||
|
||||
2006-10-30 (REL_1_1_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added support for Read/Write Multiple Registers function
|
||||
(0x17). Added some tips to reduce memory requirements.
|
||||
Added MSP430 Port for GCC and Rowley Crossworks.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURE (MSP430): Added new MSP430 port.
|
||||
- FEATURE (ALL): Added support for Read/Write Multiple Registers
|
||||
function (0x17). The implementation simply makes two callbacks
|
||||
to the eMBRegHoldingCB function where first the values are
|
||||
written and then the other register values are read.
|
||||
- FEATURE (ALL): Added some tips on reducing memory requirements
|
||||
with the protocol stack.
|
||||
|
||||
2006-10-30 (REL_1_0_5) Christian Walter <wolti@sil.at>:
|
||||
Notes: eMBDisable and eMBClose can now be called multiple times
|
||||
which makes shutdown of the protocol stack easier.
|
||||
Fixed bug in RTU state machine where we switched from the
|
||||
error state immediately to the idle state. Correct behaviour
|
||||
would be to wait till the end of frame.
|
||||
Added new STR71X GCC port which uses only freely available tools
|
||||
like GNU ARM, OpenOCD (Wiggler) and GDB.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURE (STR71X): Added GCC standalone port which does not
|
||||
depend on the Rowley Crosswork tools.
|
||||
- FEATURE (ALL): eMBDisable can now be called multiple times
|
||||
and returns MB_ENOERR in case is was already disabled.
|
||||
eMBClose also supports beeing called multiple times in
|
||||
which pvMBFrameCloseCur( ) is called when the protocol stack
|
||||
is in state STATE_DISABLED.
|
||||
- BUG (RTU): Fixed bug in xMBRTUReceiveFSM where the error
|
||||
state is immediately left because of a missing break. Instead
|
||||
we should wait till the damaged frame is finished.
|
||||
|
||||
2006-10-11 (REL_1_0_4) Christian Walter <wolti@sil.at>:
|
||||
Notes: Fixed bug when more than 255 coils are requested. Fixed bug in
|
||||
Linux/Cygwin port when not all bytes could be written by the first
|
||||
call to write. Added support for removing previously registered
|
||||
function handlers.
|
||||
|
||||
Detailed notes:
|
||||
- BUG (ALL): mbfunccoils contained a bug which limited the amount
|
||||
of coils to read to 255.
|
||||
- BUG (LINUX): prvbMBPortSerialWrite contained a bug in the loop
|
||||
which writes the RTU/ASCII frame to the serial file descriptor.
|
||||
If not all bytes where written in the first call or write was
|
||||
interrupted the sent frame is corrupted.
|
||||
- FEATURE (ALL): eMBRegisterCB now supports NULL as handler
|
||||
argument in which case a previously registered function
|
||||
handler is deregistered from the protocol stack.
|
||||
|
||||
2006-09-27 (REL_1_0_3) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added new functions to support registering of custom callback
|
||||
handlers. This makes it possible to implement new Modbus function
|
||||
codes without touching the protocol stack.
|
||||
New port for ATMega128 added. Thanks to Richard C Sandoz Jr. for
|
||||
the patches.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURE (ALL): Added support for registering new functions handlers
|
||||
with eMBRegisterCB.
|
||||
- FEATURE (AVR): Added patches from Richard C Sandoz Jr. for ATMega128
|
||||
|
||||
2006-09-06 (REL_1_0_2) Christian Walter <wolti@sil.at>:
|
||||
Notes: Fixed bug in FreeRTOS porting layer for STR71X/lwIP target where
|
||||
memory is not freed in the sys_arch_thread_remove function.
|
||||
Synched MCF5235TCP port with the FreeRTOS/lwIP port for the STR71X.
|
||||
|
||||
Detailed notes:
|
||||
- BUG (STR71XTCP): Sys_arch_thread_remove did not free the memory from
|
||||
the TCB.
|
||||
- BUG (STR71XTCP): Unnecessary call to vTaskSuspendAll removed.
|
||||
- BUG (STR71XTCP): Bug with counting variable. The first to lwIP tasks
|
||||
got the same name (lwIP0).
|
||||
- FEATURE (MCF5235TCP): Enhanced functions from the STR71X/lwIP port
|
||||
merged into the Coldfire port.
|
||||
|
||||
2006-09-04 (REL_1_0_1) Christian Walter <wolti@sil.at>:
|
||||
Notes: Fixed bug in serial driver for STR71x target when the ring buffer
|
||||
overflows.
|
||||
|
||||
Detailed notes:
|
||||
- BUG (STR71XTCP): Under high load the ring buffer in the serial driver
|
||||
functions might overflow. There was an error with counting the number
|
||||
of received characters which corrupted received frames.
|
||||
Now receiver correctly recovers in case of dropped bytes.
|
||||
|
||||
2006-09-04 (REL_1_0) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added support for ATmega8, ATmega16, ATmega32, ATmega169 and
|
||||
RS485 drivers in the AVR support. Special thanks to Tran Minh Hoang
|
||||
for his contribution.
|
||||
Added a new lwIP port for the STR71X target which uses one serial
|
||||
interface for a PPP connection. This can be used for remote Modbus/TCP
|
||||
devices in combination with a Modem (E.g. GPRS or Analog).
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES (AVR): Integrated patches from Tran Minh Hoang to support the
|
||||
ATmega8, ATmega16, ATmega32, ATmega169 controllers.
|
||||
- FEATURES (AVR): Added support for RS485 drivers in the AVR code. The
|
||||
example supports the DS76176.
|
||||
- FEATURES (STR71XTCP): implemented function in STR71X/lwIP porting layer
|
||||
to remove running tasks.
|
||||
- FEATURES (STR71XTCP): added new thread creation function in STR71X/lwIP
|
||||
porting layer which allows specifing the stack size.
|
||||
- BUGS (STR71XTCP): pppOpen defined in ppp.c does not check the return
|
||||
value of sys_thread_new. If task creation fails the system crashes.
|
||||
- BUGS (STR71XTCP): pppMain must not return - Instead it should remove
|
||||
its task from the scheduler.
|
||||
|
||||
2006-08-30 (REL_9) Christian Walter <wolti@sil.at>:
|
||||
Notes: Added lwIP port for the MCF5235 target. The lwIP part is
|
||||
generic and therefore FreeModbus now works on any target with
|
||||
lwIP support.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: Incoperated MCF5235 FreeRTOS/lwIP port done by the
|
||||
author in this project.
|
||||
- FEATURES: Added lwIP port for FreeModbus
|
||||
- FEATURES: Added demo application for FreeModbus and lwIP.
|
||||
|
||||
2006-08-22 (REL_0_82) Christian Walter <wolti@sil.at>
|
||||
Notes: Fixed bug with Modbus ASCII support
|
||||
|
||||
Detailed notes:
|
||||
- BUG: During the last upgrade an error was introduced in the
|
||||
initialization code of Modbus ASCII and therefore ASCII
|
||||
support was broken. The bug is fixed now and was tested with
|
||||
the Win32 port.
|
||||
|
||||
2006-08-22 (REL_0_81) Christian Walter <wolti@sil.at>
|
||||
Notes: Added porting guide
|
||||
|
||||
Detailed notes:
|
||||
- OTHER: Added a new porting guide to the documentation.
|
||||
- OTHER: Added a empty example for new ports to the project as a
|
||||
starting point.
|
||||
|
||||
2006-08-01 (REL_0_8) Christian Walter <wolti@sil.at>
|
||||
Notes: Added Linux RTU/ASCII port.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: Added a new Linux RTU/ASCII port. The port should work
|
||||
on any Linux distribution and it should be possible to run it
|
||||
on uCLinux.
|
||||
|
||||
2006-06-26 (REL_0_7) Christian Walter <wolti@sil.at>
|
||||
Notes: Changed the WIN32 serial port to better fit into the design.
|
||||
|
||||
Detailed notes:
|
||||
- OTHER: Design of the WIN32 serial port changed. The polling function
|
||||
for the serial device are now called from the event loop.
|
||||
- OTHER: Debugging uses the same interface as the WIN32/TCP port.
|
||||
|
||||
2006-06-25 Christian Walter <wolti@sil.at>
|
||||
|
||||
Notes: Initial work on a Modbus/TCP port is available. The port includes
|
||||
an example for a Win32 port which uses the Winsock API.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: added required functions to core protocol stack to support
|
||||
a Modbus/TCP implementation.
|
||||
- FEATURES: added a Win32 port for the Modbus/TCP core. The port is
|
||||
currently limited to one concurrent client.
|
||||
- OTHER: The implementation of eMBClose to shutdown the protocol stack
|
||||
was changed to unify it with the new Modbus/TCP code.
|
||||
-
|
||||
|
||||
2006-06-18 Christian Walter <wolti@sil.at>
|
||||
|
||||
Detailed notes:
|
||||
- OTHER: while working on the Win32 port some line feeds got
|
||||
wrong. Also some source files used tabs instead of spaces.
|
||||
- OTHER: prototypes for xMBUtilSetBits and xMBUtilGetBits fixed.
|
||||
usNBits should be ucNBits by convention.
|
||||
|
||||
2006-06-17 Christian Walter <wolti@sil.at>
|
||||
|
||||
Notes: Fixed various bugs with the Win32 port
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: implement shutdown functionality for protocol stack.
|
||||
- FEATURES: protocol stack can be enabled and disabled during runtime.
|
||||
- FEATURES: interface functions now do more error checking. For
|
||||
example if eMBPool is called in an uninitialized state.
|
||||
- FEATURES: extended Win32 demo application to use the new features.
|
||||
- BUG: fixed bug in Win32 demo for ASCII mode.
|
||||
|
||||
2006-06-16 Christian Walter <wolti@sil.at>
|
||||
Notes: The new version includes a new port for the
|
||||
Win32 platform
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: added Win32 platform
|
||||
|
||||
2006-05-14 Christian Walter <wolti@sil.at>
|
||||
Notes: The new version includes a new port for the
|
||||
Freescale MCF5235 processor.
|
||||
|
||||
Detailed notes:
|
||||
- FEATURES: added new MCF5235 port.
|
||||
- OTHER: fixed some missing code headers.
|
||||
|
||||
2006-05-01 Christian Walter <wolti@sil.at>
|
||||
Notes: This version removes the t1.5 timers from the Modbus RTU
|
||||
implementation because no one actually uses it and the CPU
|
||||
load is very high. T
|
||||
In addition some documentation cleanups has been done and the
|
||||
ARM demo has been updated.
|
||||
|
||||
Detailed notes:
|
||||
|
||||
- FEATURES: the t1.5 timeout has been removed. Therefore only
|
||||
one timer is required.
|
||||
- BUG: the ARM demo project missed some files in the project
|
||||
workspace and did not compile cleanly
|
||||
|
||||
2006-02-28 Christian Walter <wolti@sil.at>
|
||||
Notes: This version includes support for two new command
|
||||
(write multiple coils, read discrete input)
|
||||
|
||||
Detailed notes:
|
||||
- BUG: some function used the wrong data types
|
||||
- FEATURES: added support for write multiple coils function.
|
||||
- FEATURES: added support for read discrete input.
|
||||
- OTHER: some code cleanups with lint tool.
|
||||
|
||||
2006-02-28 Christian Walter <wolti@sil.at>
|
||||
|
||||
Notes: The new version 0.31 adds support for reading and writing the
|
||||
coil registers and add some bug fixes.
|
||||
|
||||
Detailed notes:
|
||||
- BUG: fixed bug with to small modbus requests being ignored.
|
||||
- FEATURES: added support for write single coil function.
|
||||
- FEATURES: added support for working with byte packed bit fields
|
||||
to support coils and discrete inputs better.
|
||||
- API: API for set slave id functions changed.
|
||||
|
||||
2006-02-26 Christian Walter <wolti@sil.at>
|
||||
|
||||
Notes: First public release which includes an ARM and AVR port.
|
|
@ -1,27 +0,0 @@
|
|||
menu "Modbus master and slave stack"
|
||||
|
||||
config RT_USING_MODBUS
|
||||
bool "Enable Modbus stack"
|
||||
default n
|
||||
|
||||
if RT_USING_MODBUS
|
||||
config RT_MODBUS_MASTER_RTU
|
||||
bool "RTU master mode"
|
||||
default n
|
||||
|
||||
config RT_MODBUS_SLAVE_RTU
|
||||
bool "RTU slave mode"
|
||||
default n
|
||||
if RT_MODBUS_SLAVE_RTU
|
||||
config RT_MODBUS_SLAVE_USE_CONTROL_PIN
|
||||
bool "Use Contorl Pin"
|
||||
default n
|
||||
if RT_MODBUS_SLAVE_USE_CONTROL_PIN
|
||||
config MODBUS_SLAVE_RT_CONTROL_PIN_INDEX
|
||||
int "pin index for RS485 TX/RX select"
|
||||
default 10
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
endmenu
|
|
@ -1,77 +0,0 @@
|
|||
Import('RTT_ROOT')
|
||||
from building import *
|
||||
|
||||
src = Split("""
|
||||
modbus/functions/mbfuncdiag.c
|
||||
modbus/functions/mbutils.c
|
||||
modbus/functions/mbfuncother.c
|
||||
modbus/rtu/mbcrc.c
|
||||
port/port.c
|
||||
""")
|
||||
|
||||
master_rtu_src = Split("""
|
||||
modbus/functions/mbfunccoils_m.c
|
||||
modbus/functions/mbfuncdisc_m.c
|
||||
modbus/functions/mbfuncholding_m.c
|
||||
modbus/functions/mbfuncinput_m.c
|
||||
modbus/rtu/mbrtu_m.c
|
||||
modbus/mb_m.c
|
||||
port/portevent_m.c
|
||||
port/portserial_m.c
|
||||
port/porttimer_m.c
|
||||
port/user_mb_app_m.c
|
||||
""")
|
||||
|
||||
slave_rtu_src = Split("""
|
||||
modbus/functions/mbfunccoils.c
|
||||
modbus/functions/mbfuncdisc.c
|
||||
modbus/functions/mbfuncholding.c
|
||||
modbus/functions/mbfuncinput.c
|
||||
modbus/rtu/mbrtu.c
|
||||
modbus/mb.c
|
||||
port/portevent.c
|
||||
port/portserial.c
|
||||
port/porttimer.c
|
||||
port/user_mb_app.c
|
||||
""")
|
||||
|
||||
master_slave_rtu_src = Split("""
|
||||
modbus/functions/mbfunccoils.c
|
||||
modbus/functions/mbfunccoils_m.c
|
||||
modbus/functions/mbfuncdisc.c
|
||||
modbus/functions/mbfuncdisc_m.c
|
||||
modbus/functions/mbfuncholding.c
|
||||
modbus/functions/mbfuncholding_m.c
|
||||
modbus/functions/mbfuncinput.c
|
||||
modbus/functions/mbfuncinput_m.c
|
||||
modbus/rtu/mbrtu.c
|
||||
modbus/rtu/mbrtu_m.c
|
||||
modbus/mb.c
|
||||
modbus/mb_m.c
|
||||
port/portevent.c
|
||||
port/portevent_m.c
|
||||
port/portserial.c
|
||||
port/portserial_m.c
|
||||
port/porttimer.c
|
||||
port/porttimer_m.c
|
||||
port/user_mb_app.c
|
||||
port/user_mb_app_m.c
|
||||
""")
|
||||
|
||||
# The set of source files associated with this SConscript file.
|
||||
path = [GetCurrentDir() + '/modbus/include',
|
||||
GetCurrentDir() + '/modbus/rtu',
|
||||
GetCurrentDir() + '/port']
|
||||
|
||||
if GetDepend(['RT_MODBUS_MASTER_RTU']):
|
||||
src += master_rtu_src
|
||||
|
||||
if GetDepend(['RT_MODBUS_SLAVE_RTU']):
|
||||
src += slave_rtu_src
|
||||
|
||||
if GetDepend(['RT_MODBUS_MASTER_SLAVE_RTU']):
|
||||
src += master_slave_rtu_src
|
||||
|
||||
group = DefineGroup('FreeModbus', src, depend = ['RT_USING_MODBUS'], CPPPATH = path)
|
||||
|
||||
Return('group')
|
|
@ -1,25 +0,0 @@
|
|||
Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions
|
||||
are met:
|
||||
1. Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
3. The name of the author may not be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
|
@ -1,340 +0,0 @@
|
|||
GNU GENERAL PUBLIC LICENSE
|
||||
Version 2, June 1991
|
||||
|
||||
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
|
||||
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
Everyone is permitted to copy and distribute verbatim copies
|
||||
of this license document, but changing it is not allowed.
|
||||
|
||||
Preamble
|
||||
|
||||
The licenses for most software are designed to take away your
|
||||
freedom to share and change it. By contrast, the GNU General Public
|
||||
License is intended to guarantee your freedom to share and change free
|
||||
software--to make sure the software is free for all its users. This
|
||||
General Public License applies to most of the Free Software
|
||||
Foundation's software and to any other program whose authors commit to
|
||||
using it. (Some other Free Software Foundation software is covered by
|
||||
the GNU Library General Public License instead.) You can apply it to
|
||||
your programs, too.
|
||||
|
||||
When we speak of free software, we are referring to freedom, not
|
||||
price. Our General Public Licenses are designed to make sure that you
|
||||
have the freedom to distribute copies of free software (and charge for
|
||||
this service if you wish), that you receive source code or can get it
|
||||
if you want it, that you can change the software or use pieces of it
|
||||
in new free programs; and that you know you can do these things.
|
||||
|
||||
To protect your rights, we need to make restrictions that forbid
|
||||
anyone to deny you these rights or to ask you to surrender the rights.
|
||||
These restrictions translate to certain responsibilities for you if you
|
||||
distribute copies of the software, or if you modify it.
|
||||
|
||||
For example, if you distribute copies of such a program, whether
|
||||
gratis or for a fee, you must give the recipients all the rights that
|
||||
you have. You must make sure that they, too, receive or can get the
|
||||
source code. And you must show them these terms so they know their
|
||||
rights.
|
||||
|
||||
We protect your rights with two steps: (1) copyright the software, and
|
||||
(2) offer you this license which gives you legal permission to copy,
|
||||
distribute and/or modify the software.
|
||||
|
||||
Also, for each author's protection and ours, we want to make certain
|
||||
that everyone understands that there is no warranty for this free
|
||||
software. If the software is modified by someone else and passed on, we
|
||||
want its recipients to know that what they have is not the original, so
|
||||
that any problems introduced by others will not reflect on the original
|
||||
authors' reputations.
|
||||
|
||||
Finally, any free program is threatened constantly by software
|
||||
patents. We wish to avoid the danger that redistributors of a free
|
||||
program will individually obtain patent licenses, in effect making the
|
||||
program proprietary. To prevent this, we have made it clear that any
|
||||
patent must be licensed for everyone's free use or not licensed at all.
|
||||
|
||||
The precise terms and conditions for copying, distribution and
|
||||
modification follow.
|
||||
|
||||
GNU GENERAL PUBLIC LICENSE
|
||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
|
||||
|
||||
0. This License applies to any program or other work which contains
|
||||
a notice placed by the copyright holder saying it may be distributed
|
||||
under the terms of this General Public License. The "Program", below,
|
||||
refers to any such program or work, and a "work based on the Program"
|
||||
means either the Program or any derivative work under copyright law:
|
||||
that is to say, a work containing the Program or a portion of it,
|
||||
either verbatim or with modifications and/or translated into another
|
||||
language. (Hereinafter, translation is included without limitation in
|
||||
the term "modification".) Each licensee is addressed as "you".
|
||||
|
||||
Activities other than copying, distribution and modification are not
|
||||
covered by this License; they are outside its scope. The act of
|
||||
running the Program is not restricted, and the output from the Program
|
||||
is covered only if its contents constitute a work based on the
|
||||
Program (independent of having been made by running the Program).
|
||||
Whether that is true depends on what the Program does.
|
||||
|
||||
1. You may copy and distribute verbatim copies of the Program's
|
||||
source code as you receive it, in any medium, provided that you
|
||||
conspicuously and appropriately publish on each copy an appropriate
|
||||
copyright notice and disclaimer of warranty; keep intact all the
|
||||
notices that refer to this License and to the absence of any warranty;
|
||||
and give any other recipients of the Program a copy of this License
|
||||
along with the Program.
|
||||
|
||||
You may charge a fee for the physical act of transferring a copy, and
|
||||
you may at your option offer warranty protection in exchange for a fee.
|
||||
|
||||
2. You may modify your copy or copies of the Program or any portion
|
||||
of it, thus forming a work based on the Program, and copy and
|
||||
distribute such modifications or work under the terms of Section 1
|
||||
above, provided that you also meet all of these conditions:
|
||||
|
||||
a) You must cause the modified files to carry prominent notices
|
||||
stating that you changed the files and the date of any change.
|
||||
|
||||
b) You must cause any work that you distribute or publish, that in
|
||||
whole or in part contains or is derived from the Program or any
|
||||
part thereof, to be licensed as a whole at no charge to all third
|
||||
parties under the terms of this License.
|
||||
|
||||
c) If the modified program normally reads commands interactively
|
||||
when run, you must cause it, when started running for such
|
||||
interactive use in the most ordinary way, to print or display an
|
||||
announcement including an appropriate copyright notice and a
|
||||
notice that there is no warranty (or else, saying that you provide
|
||||
a warranty) and that users may redistribute the program under
|
||||
these conditions, and telling the user how to view a copy of this
|
||||
License. (Exception: if the Program itself is interactive but
|
||||
does not normally print such an announcement, your work based on
|
||||
the Program is not required to print an announcement.)
|
||||
|
||||
These requirements apply to the modified work as a whole. If
|
||||
identifiable sections of that work are not derived from the Program,
|
||||
and can be reasonably considered independent and separate works in
|
||||
themselves, then this License, and its terms, do not apply to those
|
||||
sections when you distribute them as separate works. But when you
|
||||
distribute the same sections as part of a whole which is a work based
|
||||
on the Program, the distribution of the whole must be on the terms of
|
||||
this License, whose permissions for other licensees extend to the
|
||||
entire whole, and thus to each and every part regardless of who wrote it.
|
||||
|
||||
Thus, it is not the intent of this section to claim rights or contest
|
||||
your rights to work written entirely by you; rather, the intent is to
|
||||
exercise the right to control the distribution of derivative or
|
||||
collective works based on the Program.
|
||||
|
||||
In addition, mere aggregation of another work not based on the Program
|
||||
with the Program (or with a work based on the Program) on a volume of
|
||||
a storage or distribution medium does not bring the other work under
|
||||
the scope of this License.
|
||||
|
||||
3. You may copy and distribute the Program (or a work based on it,
|
||||
under Section 2) in object code or executable form under the terms of
|
||||
Sections 1 and 2 above provided that you also do one of the following:
|
||||
|
||||
a) Accompany it with the complete corresponding machine-readable
|
||||
source code, which must be distributed under the terms of Sections
|
||||
1 and 2 above on a medium customarily used for software interchange; or,
|
||||
|
||||
b) Accompany it with a written offer, valid for at least three
|
||||
years, to give any third party, for a charge no more than your
|
||||
cost of physically performing source distribution, a complete
|
||||
machine-readable copy of the corresponding source code, to be
|
||||
distributed under the terms of Sections 1 and 2 above on a medium
|
||||
customarily used for software interchange; or,
|
||||
|
||||
c) Accompany it with the information you received as to the offer
|
||||
to distribute corresponding source code. (This alternative is
|
||||
allowed only for noncommercial distribution and only if you
|
||||
received the program in object code or executable form with such
|
||||
an offer, in accord with Subsection b above.)
|
||||
|
||||
The source code for a work means the preferred form of the work for
|
||||
making modifications to it. For an executable work, complete source
|
||||
code means all the source code for all modules it contains, plus any
|
||||
associated interface definition files, plus the scripts used to
|
||||
control compilation and installation of the executable. However, as a
|
||||
special exception, the source code distributed need not include
|
||||
anything that is normally distributed (in either source or binary
|
||||
form) with the major components (compiler, kernel, and so on) of the
|
||||
operating system on which the executable runs, unless that component
|
||||
itself accompanies the executable.
|
||||
|
||||
If distribution of executable or object code is made by offering
|
||||
access to copy from a designated place, then offering equivalent
|
||||
access to copy the source code from the same place counts as
|
||||
distribution of the source code, even though third parties are not
|
||||
compelled to copy the source along with the object code.
|
||||
|
||||
4. You may not copy, modify, sublicense, or distribute the Program
|
||||
except as expressly provided under this License. Any attempt
|
||||
otherwise to copy, modify, sublicense or distribute the Program is
|
||||
void, and will automatically terminate your rights under this License.
|
||||
However, parties who have received copies, or rights, from you under
|
||||
this License will not have their licenses terminated so long as such
|
||||
parties remain in full compliance.
|
||||
|
||||
5. You are not required to accept this License, since you have not
|
||||
signed it. However, nothing else grants you permission to modify or
|
||||
distribute the Program or its derivative works. These actions are
|
||||
prohibited by law if you do not accept this License. Therefore, by
|
||||
modifying or distributing the Program (or any work based on the
|
||||
Program), you indicate your acceptance of this License to do so, and
|
||||
all its terms and conditions for copying, distributing or modifying
|
||||
the Program or works based on it.
|
||||
|
||||
6. Each time you redistribute the Program (or any work based on the
|
||||
Program), the recipient automatically receives a license from the
|
||||
original licensor to copy, distribute or modify the Program subject to
|
||||
these terms and conditions. You may not impose any further
|
||||
restrictions on the recipients' exercise of the rights granted herein.
|
||||
You are not responsible for enforcing compliance by third parties to
|
||||
this License.
|
||||
|
||||
7. If, as a consequence of a court judgment or allegation of patent
|
||||
infringement or for any other reason (not limited to patent issues),
|
||||
conditions are imposed on you (whether by court order, agreement or
|
||||
otherwise) that contradict the conditions of this License, they do not
|
||||
excuse you from the conditions of this License. If you cannot
|
||||
distribute so as to satisfy simultaneously your obligations under this
|
||||
License and any other pertinent obligations, then as a consequence you
|
||||
may not distribute the Program at all. For example, if a patent
|
||||
license would not permit royalty-free redistribution of the Program by
|
||||
all those who receive copies directly or indirectly through you, then
|
||||
the only way you could satisfy both it and this License would be to
|
||||
refrain entirely from distribution of the Program.
|
||||
|
||||
If any portion of this section is held invalid or unenforceable under
|
||||
any particular circumstance, the balance of the section is intended to
|
||||
apply and the section as a whole is intended to apply in other
|
||||
circumstances.
|
||||
|
||||
It is not the purpose of this section to induce you to infringe any
|
||||
patents or other property right claims or to contest validity of any
|
||||
such claims; this section has the sole purpose of protecting the
|
||||
integrity of the free software distribution system, which is
|
||||
implemented by public license practices. Many people have made
|
||||
generous contributions to the wide range of software distributed
|
||||
through that system in reliance on consistent application of that
|
||||
system; it is up to the author/donor to decide if he or she is willing
|
||||
to distribute software through any other system and a licensee cannot
|
||||
impose that choice.
|
||||
|
||||
This section is intended to make thoroughly clear what is believed to
|
||||
be a consequence of the rest of this License.
|
||||
|
||||
8. If the distribution and/or use of the Program is restricted in
|
||||
certain countries either by patents or by copyrighted interfaces, the
|
||||
original copyright holder who places the Program under this License
|
||||
may add an explicit geographical distribution limitation excluding
|
||||
those countries, so that distribution is permitted only in or among
|
||||
countries not thus excluded. In such case, this License incorporates
|
||||
the limitation as if written in the body of this License.
|
||||
|
||||
9. The Free Software Foundation may publish revised and/or new versions
|
||||
of the General Public License from time to time. Such new versions will
|
||||
be similar in spirit to the present version, but may differ in detail to
|
||||
address new problems or concerns.
|
||||
|
||||
Each version is given a distinguishing version number. If the Program
|
||||
specifies a version number of this License which applies to it and "any
|
||||
later version", you have the option of following the terms and conditions
|
||||
either of that version or of any later version published by the Free
|
||||
Software Foundation. If the Program does not specify a version number of
|
||||
this License, you may choose any version ever published by the Free Software
|
||||
Foundation.
|
||||
|
||||
10. If you wish to incorporate parts of the Program into other free
|
||||
programs whose distribution conditions are different, write to the author
|
||||
to ask for permission. For software which is copyrighted by the Free
|
||||
Software Foundation, write to the Free Software Foundation; we sometimes
|
||||
make exceptions for this. Our decision will be guided by the two goals
|
||||
of preserving the free status of all derivatives of our free software and
|
||||
of promoting the sharing and reuse of software generally.
|
||||
|
||||
NO WARRANTY
|
||||
|
||||
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
|
||||
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
|
||||
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
|
||||
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||||
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
|
||||
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
|
||||
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
|
||||
REPAIR OR CORRECTION.
|
||||
|
||||
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
|
||||
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
|
||||
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
|
||||
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
|
||||
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
|
||||
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
|
||||
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
|
||||
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGES.
|
||||
|
||||
END OF TERMS AND CONDITIONS
|
||||
|
||||
How to Apply These Terms to Your New Programs
|
||||
|
||||
If you develop a new program, and you want it to be of the greatest
|
||||
possible use to the public, the best way to achieve this is to make it
|
||||
free software which everyone can redistribute and change under these terms.
|
||||
|
||||
To do so, attach the following notices to the program. It is safest
|
||||
to attach them to the start of each source file to most effectively
|
||||
convey the exclusion of warranty; and each file should have at least
|
||||
the "copyright" line and a pointer to where the full notice is found.
|
||||
|
||||
<one line to give the program's name and a brief idea of what it does.>
|
||||
Copyright (C) <year> <name of author>
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
|
||||
Also add information on how to contact you by electronic and paper mail.
|
||||
|
||||
If the program is interactive, make it output a short notice like this
|
||||
when it starts in an interactive mode:
|
||||
|
||||
Gnomovision version 69, Copyright (C) year name of author
|
||||
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
|
||||
This is free software, and you are welcome to redistribute it
|
||||
under certain conditions; type `show c' for details.
|
||||
|
||||
The hypothetical commands `show w' and `show c' should show the appropriate
|
||||
parts of the General Public License. Of course, the commands you use may
|
||||
be called something other than `show w' and `show c'; they could even be
|
||||
mouse-clicks or menu items--whatever suits your program.
|
||||
|
||||
You should also get your employer (if you work as a programmer) or your
|
||||
school, if any, to sign a "copyright disclaimer" for the program, if
|
||||
necessary. Here is a sample; alter the names:
|
||||
|
||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
|
||||
`Gnomovision' (which makes passes at compilers) written by James Hacker.
|
||||
|
||||
<signature of Ty Coon>, 1 April 1989
|
||||
Ty Coon, President of Vice
|
||||
|
||||
This General Public License does not permit incorporating your program into
|
||||
proprietary programs. If your program is a subroutine library, you may
|
||||
consider it more useful to permit linking proprietary applications with the
|
||||
library. If this is what you want to do, use the GNU Library General
|
||||
Public License instead of this License.
|
|
@ -1,504 +0,0 @@
|
|||
GNU LESSER GENERAL PUBLIC LICENSE
|
||||
Version 2.1, February 1999
|
||||
|
||||
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
|
||||
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
Everyone is permitted to copy and distribute verbatim copies
|
||||
of this license document, but changing it is not allowed.
|
||||
|
||||
[This is the first released version of the Lesser GPL. It also counts
|
||||
as the successor of the GNU Library Public License, version 2, hence
|
||||
the version number 2.1.]
|
||||
|
||||
Preamble
|
||||
|
||||
The licenses for most software are designed to take away your
|
||||
freedom to share and change it. By contrast, the GNU General Public
|
||||
Licenses are intended to guarantee your freedom to share and change
|
||||
free software--to make sure the software is free for all its users.
|
||||
|
||||
This license, the Lesser General Public License, applies to some
|
||||
specially designated software packages--typically libraries--of the
|
||||
Free Software Foundation and other authors who decide to use it. You
|
||||
can use it too, but we suggest you first think carefully about whether
|
||||
this license or the ordinary General Public License is the better
|
||||
strategy to use in any particular case, based on the explanations below.
|
||||
|
||||
When we speak of free software, we are referring to freedom of use,
|
||||
not price. Our General Public Licenses are designed to make sure that
|
||||
you have the freedom to distribute copies of free software (and charge
|
||||
for this service if you wish); that you receive source code or can get
|
||||
it if you want it; that you can change the software and use pieces of
|
||||
it in new free programs; and that you are informed that you can do
|
||||
these things.
|
||||
|
||||
To protect your rights, we need to make restrictions that forbid
|
||||
distributors to deny you these rights or to ask you to surrender these
|
||||
rights. These restrictions translate to certain responsibilities for
|
||||
you if you distribute copies of the library or if you modify it.
|
||||
|
||||
For example, if you distribute copies of the library, whether gratis
|
||||
or for a fee, you must give the recipients all the rights that we gave
|
||||
you. You must make sure that they, too, receive or can get the source
|
||||
code. If you link other code with the library, you must provide
|
||||
complete object files to the recipients, so that they can relink them
|
||||
with the library after making changes to the library and recompiling
|
||||
it. And you must show them these terms so they know their rights.
|
||||
|
||||
We protect your rights with a two-step method: (1) we copyright the
|
||||
library, and (2) we offer you this license, which gives you legal
|
||||
permission to copy, distribute and/or modify the library.
|
||||
|
||||
To protect each distributor, we want to make it very clear that
|
||||
there is no warranty for the free library. Also, if the library is
|
||||
modified by someone else and passed on, the recipients should know
|
||||
that what they have is not the original version, so that the original
|
||||
author's reputation will not be affected by problems that might be
|
||||
introduced by others.
|
||||
|
||||
Finally, software patents pose a constant threat to the existence of
|
||||
any free program. We wish to make sure that a company cannot
|
||||
effectively restrict the users of a free program by obtaining a
|
||||
restrictive license from a patent holder. Therefore, we insist that
|
||||
any patent license obtained for a version of the library must be
|
||||
consistent with the full freedom of use specified in this license.
|
||||
|
||||
Most GNU software, including some libraries, is covered by the
|
||||
ordinary GNU General Public License. This license, the GNU Lesser
|
||||
General Public License, applies to certain designated libraries, and
|
||||
is quite different from the ordinary General Public License. We use
|
||||
this license for certain libraries in order to permit linking those
|
||||
libraries into non-free programs.
|
||||
|
||||
When a program is linked with a library, whether statically or using
|
||||
a shared library, the combination of the two is legally speaking a
|
||||
combined work, a derivative of the original library. The ordinary
|
||||
General Public License therefore permits such linking only if the
|
||||
entire combination fits its criteria of freedom. The Lesser General
|
||||
Public License permits more lax criteria for linking other code with
|
||||
the library.
|
||||
|
||||
We call this license the "Lesser" General Public License because it
|
||||
does Less to protect the user's freedom than the ordinary General
|
||||
Public License. It also provides other free software developers Less
|
||||
of an advantage over competing non-free programs. These disadvantages
|
||||
are the reason we use the ordinary General Public License for many
|
||||
libraries. However, the Lesser license provides advantages in certain
|
||||
special circumstances.
|
||||
|
||||
For example, on rare occasions, there may be a special need to
|
||||
encourage the widest possible use of a certain library, so that it becomes
|
||||
a de-facto standard. To achieve this, non-free programs must be
|
||||
allowed to use the library. A more frequent case is that a free
|
||||
library does the same job as widely used non-free libraries. In this
|
||||
case, there is little to gain by limiting the free library to free
|
||||
software only, so we use the Lesser General Public License.
|
||||
|
||||
In other cases, permission to use a particular library in non-free
|
||||
programs enables a greater number of people to use a large body of
|
||||
free software. For example, permission to use the GNU C Library in
|
||||
non-free programs enables many more people to use the whole GNU
|
||||
operating system, as well as its variant, the GNU/Linux operating
|
||||
system.
|
||||
|
||||
Although the Lesser General Public License is Less protective of the
|
||||
users' freedom, it does ensure that the user of a program that is
|
||||
linked with the Library has the freedom and the wherewithal to run
|
||||
that program using a modified version of the Library.
|
||||
|
||||
The precise terms and conditions for copying, distribution and
|
||||
modification follow. Pay close attention to the difference between a
|
||||
"work based on the library" and a "work that uses the library". The
|
||||
former contains code derived from the library, whereas the latter must
|
||||
be combined with the library in order to run.
|
||||
|
||||
GNU LESSER GENERAL PUBLIC LICENSE
|
||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
|
||||
|
||||
0. This License Agreement applies to any software library or other
|
||||
program which contains a notice placed by the copyright holder or
|
||||
other authorized party saying it may be distributed under the terms of
|
||||
this Lesser General Public License (also called "this License").
|
||||
Each licensee is addressed as "you".
|
||||
|
||||
A "library" means a collection of software functions and/or data
|
||||
prepared so as to be conveniently linked with application programs
|
||||
(which use some of those functions and data) to form executables.
|
||||
|
||||
The "Library", below, refers to any such software library or work
|
||||
which has been distributed under these terms. A "work based on the
|
||||
Library" means either the Library or any derivative work under
|
||||
copyright law: that is to say, a work containing the Library or a
|
||||
portion of it, either verbatim or with modifications and/or translated
|
||||
straightforwardly into another language. (Hereinafter, translation is
|
||||
included without limitation in the term "modification".)
|
||||
|
||||
"Source code" for a work means the preferred form of the work for
|
||||
making modifications to it. For a library, complete source code means
|
||||
all the source code for all modules it contains, plus any associated
|
||||
interface definition files, plus the scripts used to control compilation
|
||||
and installation of the library.
|
||||
|
||||
Activities other than copying, distribution and modification are not
|
||||
covered by this License; they are outside its scope. The act of
|
||||
running a program using the Library is not restricted, and output from
|
||||
such a program is covered only if its contents constitute a work based
|
||||
on the Library (independent of the use of the Library in a tool for
|
||||
writing it). Whether that is true depends on what the Library does
|
||||
and what the program that uses the Library does.
|
||||
|
||||
1. You may copy and distribute verbatim copies of the Library's
|
||||
complete source code as you receive it, in any medium, provided that
|
||||
you conspicuously and appropriately publish on each copy an
|
||||
appropriate copyright notice and disclaimer of warranty; keep intact
|
||||
all the notices that refer to this License and to the absence of any
|
||||
warranty; and distribute a copy of this License along with the
|
||||
Library.
|
||||
|
||||
You may charge a fee for the physical act of transferring a copy,
|
||||
and you may at your option offer warranty protection in exchange for a
|
||||
fee.
|
||||
|
||||
2. You may modify your copy or copies of the Library or any portion
|
||||
of it, thus forming a work based on the Library, and copy and
|
||||
distribute such modifications or work under the terms of Section 1
|
||||
above, provided that you also meet all of these conditions:
|
||||
|
||||
a) The modified work must itself be a software library.
|
||||
|
||||
b) You must cause the files modified to carry prominent notices
|
||||
stating that you changed the files and the date of any change.
|
||||
|
||||
c) You must cause the whole of the work to be licensed at no
|
||||
charge to all third parties under the terms of this License.
|
||||
|
||||
d) If a facility in the modified Library refers to a function or a
|
||||
table of data to be supplied by an application program that uses
|
||||
the facility, other than as an argument passed when the facility
|
||||
is invoked, then you must make a good faith effort to ensure that,
|
||||
in the event an application does not supply such function or
|
||||
table, the facility still operates, and performs whatever part of
|
||||
its purpose remains meaningful.
|
||||
|
||||
(For example, a function in a library to compute square roots has
|
||||
a purpose that is entirely well-defined independent of the
|
||||
application. Therefore, Subsection 2d requires that any
|
||||
application-supplied function or table used by this function must
|
||||
be optional: if the application does not supply it, the square
|
||||
root function must still compute square roots.)
|
||||
|
||||
These requirements apply to the modified work as a whole. If
|
||||
identifiable sections of that work are not derived from the Library,
|
||||
and can be reasonably considered independent and separate works in
|
||||
themselves, then this License, and its terms, do not apply to those
|
||||
sections when you distribute them as separate works. But when you
|
||||
distribute the same sections as part of a whole which is a work based
|
||||
on the Library, the distribution of the whole must be on the terms of
|
||||
this License, whose permissions for other licensees extend to the
|
||||
entire whole, and thus to each and every part regardless of who wrote
|
||||
it.
|
||||
|
||||
Thus, it is not the intent of this section to claim rights or contest
|
||||
your rights to work written entirely by you; rather, the intent is to
|
||||
exercise the right to control the distribution of derivative or
|
||||
collective works based on the Library.
|
||||
|
||||
In addition, mere aggregation of another work not based on the Library
|
||||
with the Library (or with a work based on the Library) on a volume of
|
||||
a storage or distribution medium does not bring the other work under
|
||||
the scope of this License.
|
||||
|
||||
3. You may opt to apply the terms of the ordinary GNU General Public
|
||||
License instead of this License to a given copy of the Library. To do
|
||||
this, you must alter all the notices that refer to this License, so
|
||||
that they refer to the ordinary GNU General Public License, version 2,
|
||||
instead of to this License. (If a newer version than version 2 of the
|
||||
ordinary GNU General Public License has appeared, then you can specify
|
||||
that version instead if you wish.) Do not make any other change in
|
||||
these notices.
|
||||
|
||||
Once this change is made in a given copy, it is irreversible for
|
||||
that copy, so the ordinary GNU General Public License applies to all
|
||||
subsequent copies and derivative works made from that copy.
|
||||
|
||||
This option is useful when you wish to copy part of the code of
|
||||
the Library into a program that is not a library.
|
||||
|
||||
4. You may copy and distribute the Library (or a portion or
|
||||
derivative of it, under Section 2) in object code or executable form
|
||||
under the terms of Sections 1 and 2 above provided that you accompany
|
||||
it with the complete corresponding machine-readable source code, which
|
||||
must be distributed under the terms of Sections 1 and 2 above on a
|
||||
medium customarily used for software interchange.
|
||||
|
||||
If distribution of object code is made by offering access to copy
|
||||
from a designated place, then offering equivalent access to copy the
|
||||
source code from the same place satisfies the requirement to
|
||||
distribute the source code, even though third parties are not
|
||||
compelled to copy the source along with the object code.
|
||||
|
||||
5. A program that contains no derivative of any portion of the
|
||||
Library, but is designed to work with the Library by being compiled or
|
||||
linked with it, is called a "work that uses the Library". Such a
|
||||
work, in isolation, is not a derivative work of the Library, and
|
||||
therefore falls outside the scope of this License.
|
||||
|
||||
However, linking a "work that uses the Library" with the Library
|
||||
creates an executable that is a derivative of the Library (because it
|
||||
contains portions of the Library), rather than a "work that uses the
|
||||
library". The executable is therefore covered by this License.
|
||||
Section 6 states terms for distribution of such executables.
|
||||
|
||||
When a "work that uses the Library" uses material from a header file
|
||||
that is part of the Library, the object code for the work may be a
|
||||
derivative work of the Library even though the source code is not.
|
||||
Whether this is true is especially significant if the work can be
|
||||
linked without the Library, or if the work is itself a library. The
|
||||
threshold for this to be true is not precisely defined by law.
|
||||
|
||||
If such an object file uses only numerical parameters, data
|
||||
structure layouts and accessors, and small macros and small inline
|
||||
functions (ten lines or less in length), then the use of the object
|
||||
file is unrestricted, regardless of whether it is legally a derivative
|
||||
work. (Executables containing this object code plus portions of the
|
||||
Library will still fall under Section 6.)
|
||||
|
||||
Otherwise, if the work is a derivative of the Library, you may
|
||||
distribute the object code for the work under the terms of Section 6.
|
||||
Any executables containing that work also fall under Section 6,
|
||||
whether or not they are linked directly with the Library itself.
|
||||
|
||||
6. As an exception to the Sections above, you may also combine or
|
||||
link a "work that uses the Library" with the Library to produce a
|
||||
work containing portions of the Library, and distribute that work
|
||||
under terms of your choice, provided that the terms permit
|
||||
modification of the work for the customer's own use and reverse
|
||||
engineering for debugging such modifications.
|
||||
|
||||
You must give prominent notice with each copy of the work that the
|
||||
Library is used in it and that the Library and its use are covered by
|
||||
this License. You must supply a copy of this License. If the work
|
||||
during execution displays copyright notices, you must include the
|
||||
copyright notice for the Library among them, as well as a reference
|
||||
directing the user to the copy of this License. Also, you must do one
|
||||
of these things:
|
||||
|
||||
a) Accompany the work with the complete corresponding
|
||||
machine-readable source code for the Library including whatever
|
||||
changes were used in the work (which must be distributed under
|
||||
Sections 1 and 2 above); and, if the work is an executable linked
|
||||
with the Library, with the complete machine-readable "work that
|
||||
uses the Library", as object code and/or source code, so that the
|
||||
user can modify the Library and then relink to produce a modified
|
||||
executable containing the modified Library. (It is understood
|
||||
that the user who changes the contents of definitions files in the
|
||||
Library will not necessarily be able to recompile the application
|
||||
to use the modified definitions.)
|
||||
|
||||
b) Use a suitable shared library mechanism for linking with the
|
||||
Library. A suitable mechanism is one that (1) uses at run time a
|
||||
copy of the library already present on the user's computer system,
|
||||
rather than copying library functions into the executable, and (2)
|
||||
will operate properly with a modified version of the library, if
|
||||
the user installs one, as long as the modified version is
|
||||
interface-compatible with the version that the work was made with.
|
||||
|
||||
c) Accompany the work with a written offer, valid for at
|
||||
least three years, to give the same user the materials
|
||||
specified in Subsection 6a, above, for a charge no more
|
||||
than the cost of performing this distribution.
|
||||
|
||||
d) If distribution of the work is made by offering access to copy
|
||||
from a designated place, offer equivalent access to copy the above
|
||||
specified materials from the same place.
|
||||
|
||||
e) Verify that the user has already received a copy of these
|
||||
materials or that you have already sent this user a copy.
|
||||
|
||||
For an executable, the required form of the "work that uses the
|
||||
Library" must include any data and utility programs needed for
|
||||
reproducing the executable from it. However, as a special exception,
|
||||
the materials to be distributed need not include anything that is
|
||||
normally distributed (in either source or binary form) with the major
|
||||
components (compiler, kernel, and so on) of the operating system on
|
||||
which the executable runs, unless that component itself accompanies
|
||||
the executable.
|
||||
|
||||
It may happen that this requirement contradicts the license
|
||||
restrictions of other proprietary libraries that do not normally
|
||||
accompany the operating system. Such a contradiction means you cannot
|
||||
use both them and the Library together in an executable that you
|
||||
distribute.
|
||||
|
||||
7. You may place library facilities that are a work based on the
|
||||
Library side-by-side in a single library together with other library
|
||||
facilities not covered by this License, and distribute such a combined
|
||||
library, provided that the separate distribution of the work based on
|
||||
the Library and of the other library facilities is otherwise
|
||||
permitted, and provided that you do these two things:
|
||||
|
||||
a) Accompany the combined library with a copy of the same work
|
||||
based on the Library, uncombined with any other library
|
||||
facilities. This must be distributed under the terms of the
|
||||
Sections above.
|
||||
|
||||
b) Give prominent notice with the combined library of the fact
|
||||
that part of it is a work based on the Library, and explaining
|
||||
where to find the accompanying uncombined form of the same work.
|
||||
|
||||
8. You may not copy, modify, sublicense, link with, or distribute
|
||||
the Library except as expressly provided under this License. Any
|
||||
attempt otherwise to copy, modify, sublicense, link with, or
|
||||
distribute the Library is void, and will automatically terminate your
|
||||
rights under this License. However, parties who have received copies,
|
||||
or rights, from you under this License will not have their licenses
|
||||
terminated so long as such parties remain in full compliance.
|
||||
|
||||
9. You are not required to accept this License, since you have not
|
||||
signed it. However, nothing else grants you permission to modify or
|
||||
distribute the Library or its derivative works. These actions are
|
||||
prohibited by law if you do not accept this License. Therefore, by
|
||||
modifying or distributing the Library (or any work based on the
|
||||
Library), you indicate your acceptance of this License to do so, and
|
||||
all its terms and conditions for copying, distributing or modifying
|
||||
the Library or works based on it.
|
||||
|
||||
10. Each time you redistribute the Library (or any work based on the
|
||||
Library), the recipient automatically receives a license from the
|
||||
original licensor to copy, distribute, link with or modify the Library
|
||||
subject to these terms and conditions. You may not impose any further
|
||||
restrictions on the recipients' exercise of the rights granted herein.
|
||||
You are not responsible for enforcing compliance by third parties with
|
||||
this License.
|
||||
|
||||
11. If, as a consequence of a court judgment or allegation of patent
|
||||
infringement or for any other reason (not limited to patent issues),
|
||||
conditions are imposed on you (whether by court order, agreement or
|
||||
otherwise) that contradict the conditions of this License, they do not
|
||||
excuse you from the conditions of this License. If you cannot
|
||||
distribute so as to satisfy simultaneously your obligations under this
|
||||
License and any other pertinent obligations, then as a consequence you
|
||||
may not distribute the Library at all. For example, if a patent
|
||||
license would not permit royalty-free redistribution of the Library by
|
||||
all those who receive copies directly or indirectly through you, then
|
||||
the only way you could satisfy both it and this License would be to
|
||||
refrain entirely from distribution of the Library.
|
||||
|
||||
If any portion of this section is held invalid or unenforceable under any
|
||||
particular circumstance, the balance of the section is intended to apply,
|
||||
and the section as a whole is intended to apply in other circumstances.
|
||||
|
||||
It is not the purpose of this section to induce you to infringe any
|
||||
patents or other property right claims or to contest validity of any
|
||||
such claims; this section has the sole purpose of protecting the
|
||||
integrity of the free software distribution system which is
|
||||
implemented by public license practices. Many people have made
|
||||
generous contributions to the wide range of software distributed
|
||||
through that system in reliance on consistent application of that
|
||||
system; it is up to the author/donor to decide if he or she is willing
|
||||
to distribute software through any other system and a licensee cannot
|
||||
impose that choice.
|
||||
|
||||
This section is intended to make thoroughly clear what is believed to
|
||||
be a consequence of the rest of this License.
|
||||
|
||||
12. If the distribution and/or use of the Library is restricted in
|
||||
certain countries either by patents or by copyrighted interfaces, the
|
||||
original copyright holder who places the Library under this License may add
|
||||
an explicit geographical distribution limitation excluding those countries,
|
||||
so that distribution is permitted only in or among countries not thus
|
||||
excluded. In such case, this License incorporates the limitation as if
|
||||
written in the body of this License.
|
||||
|
||||
13. The Free Software Foundation may publish revised and/or new
|
||||
versions of the Lesser General Public License from time to time.
|
||||
Such new versions will be similar in spirit to the present version,
|
||||
but may differ in detail to address new problems or concerns.
|
||||
|
||||
Each version is given a distinguishing version number. If the Library
|
||||
specifies a version number of this License which applies to it and
|
||||
"any later version", you have the option of following the terms and
|
||||
conditions either of that version or of any later version published by
|
||||
the Free Software Foundation. If the Library does not specify a
|
||||
license version number, you may choose any version ever published by
|
||||
the Free Software Foundation.
|
||||
|
||||
14. If you wish to incorporate parts of the Library into other free
|
||||
programs whose distribution conditions are incompatible with these,
|
||||
write to the author to ask for permission. For software which is
|
||||
copyrighted by the Free Software Foundation, write to the Free
|
||||
Software Foundation; we sometimes make exceptions for this. Our
|
||||
decision will be guided by the two goals of preserving the free status
|
||||
of all derivatives of our free software and of promoting the sharing
|
||||
and reuse of software generally.
|
||||
|
||||
NO WARRANTY
|
||||
|
||||
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
|
||||
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
|
||||
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
|
||||
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
|
||||
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
|
||||
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
|
||||
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
|
||||
|
||||
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
|
||||
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
|
||||
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
|
||||
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
|
||||
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
|
||||
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
|
||||
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
|
||||
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
|
||||
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
|
||||
DAMAGES.
|
||||
|
||||
END OF TERMS AND CONDITIONS
|
||||
|
||||
How to Apply These Terms to Your New Libraries
|
||||
|
||||
If you develop a new library, and you want it to be of the greatest
|
||||
possible use to the public, we recommend making it free software that
|
||||
everyone can redistribute and change. You can do so by permitting
|
||||
redistribution under these terms (or, alternatively, under the terms of the
|
||||
ordinary General Public License).
|
||||
|
||||
To apply these terms, attach the following notices to the library. It is
|
||||
safest to attach them to the start of each source file to most effectively
|
||||
convey the exclusion of warranty; and each file should have at least the
|
||||
"copyright" line and a pointer to where the full notice is found.
|
||||
|
||||
<one line to give the library's name and a brief idea of what it does.>
|
||||
Copyright (C) <year> <name of author>
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Also add information on how to contact you by electronic and paper mail.
|
||||
|
||||
You should also get your employer (if you work as a programmer) or your
|
||||
school, if any, to sign a "copyright disclaimer" for the library, if
|
||||
necessary. Here is a sample; alter the names:
|
||||
|
||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the
|
||||
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
|
||||
|
||||
<signature of Ty Coon>, 1 April 1990
|
||||
Ty Coon, President of Vice
|
||||
|
||||
That's all there is to it!
|
||||
|
||||
|
|
@ -1,485 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbascii.c,v 1.15 2007/02/18 23:46:48 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbconfig.h"
|
||||
#include "mbascii.h"
|
||||
#include "mbframe.h"
|
||||
|
||||
#include "mbcrc.h"
|
||||
#include "mbport.h"
|
||||
|
||||
#if MB_SLAVE_ASCII_ENABLED > 0
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_ASCII_DEFAULT_CR '\r' /*!< Default CR character for Modbus ASCII. */
|
||||
#define MB_ASCII_DEFAULT_LF '\n' /*!< Default LF character for Modbus ASCII. */
|
||||
#define MB_SER_PDU_SIZE_MIN 3 /*!< Minimum size of a Modbus ASCII frame. */
|
||||
#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus ASCII frame. */
|
||||
#define MB_SER_PDU_SIZE_LRC 1 /*!< Size of LRC field in PDU. */
|
||||
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
|
||||
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
typedef enum
|
||||
{
|
||||
STATE_RX_IDLE, /*!< Receiver is in idle state. */
|
||||
STATE_RX_RCV, /*!< Frame is beeing received. */
|
||||
STATE_RX_WAIT_EOF /*!< Wait for End of Frame. */
|
||||
} eMBRcvState;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
STATE_TX_IDLE, /*!< Transmitter is in idle state. */
|
||||
STATE_TX_START, /*!< Starting transmission (':' sent). */
|
||||
STATE_TX_DATA, /*!< Sending of data (Address, Data, LRC). */
|
||||
STATE_TX_END, /*!< End of transmission. */
|
||||
STATE_TX_NOTIFY /*!< Notify sender that the frame has been sent. */
|
||||
} eMBSndState;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
BYTE_HIGH_NIBBLE, /*!< Character for high nibble of byte. */
|
||||
BYTE_LOW_NIBBLE /*!< Character for low nibble of byte. */
|
||||
} eMBBytePos;
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
static UCHAR prvucMBCHAR2BIN( UCHAR ucCharacter );
|
||||
|
||||
static UCHAR prvucMBBIN2CHAR( UCHAR ucByte );
|
||||
|
||||
static UCHAR prvucMBLRC( UCHAR * pucFrame, USHORT usLen );
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
static volatile eMBSndState eSndState;
|
||||
static volatile eMBRcvState eRcvState;
|
||||
|
||||
/* We reuse the Modbus RTU buffer because only one buffer is needed and the
|
||||
* RTU buffer is bigger. */
|
||||
extern volatile UCHAR ucRTUBuf[];
|
||||
static volatile UCHAR *ucASCIIBuf = ucRTUBuf;
|
||||
|
||||
static volatile USHORT usRcvBufferPos;
|
||||
static volatile eMBBytePos eBytePos;
|
||||
|
||||
static volatile UCHAR *pucSndBufferCur;
|
||||
static volatile USHORT usSndBufferCount;
|
||||
|
||||
static volatile UCHAR ucLRC;
|
||||
static volatile UCHAR ucMBLFCharacter;
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBASCIIInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
( void )ucSlaveAddress;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
ucMBLFCharacter = MB_ASCII_DEFAULT_LF;
|
||||
|
||||
if( xMBPortSerialInit( ucPort, ulBaudRate, 7, eParity ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else if( xMBPortTimersInit( MB_ASCII_TIMEOUT_SEC * 20000UL ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
void
|
||||
eMBASCIIStart( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
|
||||
/* No special startup required for ASCII. */
|
||||
( void )xMBPortEventPost( EV_READY );
|
||||
}
|
||||
|
||||
void
|
||||
eMBASCIIStop( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
vMBPortSerialEnable( FALSE, FALSE );
|
||||
vMBPortTimersDisable( );
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBASCIIReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
assert( usRcvBufferPos < MB_SER_PDU_SIZE_MAX );
|
||||
|
||||
/* Length and CRC check */
|
||||
if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN )
|
||||
&& ( prvucMBLRC( ( UCHAR * ) ucASCIIBuf, usRcvBufferPos ) == 0 ) )
|
||||
{
|
||||
/* Save the address field. All frames are passed to the upper layed
|
||||
* and the decision if a frame is used is done there.
|
||||
*/
|
||||
*pucRcvAddress = ucASCIIBuf[MB_SER_PDU_ADDR_OFF];
|
||||
|
||||
/* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
|
||||
* size of address field and CRC checksum.
|
||||
*/
|
||||
*pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_LRC );
|
||||
|
||||
/* Return the start of the Modbus PDU to the caller. */
|
||||
*pucFrame = ( UCHAR * ) & ucASCIIBuf[MB_SER_PDU_PDU_OFF];
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBASCIISend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
UCHAR usLRC;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
/* Check if the receiver is still in idle state. If not we where to
|
||||
* slow with processing the received frame and the master sent another
|
||||
* frame on the network. We have to abort sending the frame.
|
||||
*/
|
||||
if( eRcvState == STATE_RX_IDLE )
|
||||
{
|
||||
/* First byte before the Modbus-PDU is the slave address. */
|
||||
pucSndBufferCur = ( UCHAR * ) pucFrame - 1;
|
||||
usSndBufferCount = 1;
|
||||
|
||||
/* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
|
||||
pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
|
||||
usSndBufferCount += usLength;
|
||||
|
||||
/* Calculate LRC checksum for Modbus-Serial-Line-PDU. */
|
||||
usLRC = prvucMBLRC( ( UCHAR * ) pucSndBufferCur, usSndBufferCount );
|
||||
ucASCIIBuf[usSndBufferCount++] = usLRC;
|
||||
|
||||
/* Activate the transmitter. */
|
||||
eSndState = STATE_TX_START;
|
||||
vMBPortSerialEnable( FALSE, TRUE );
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBASCIIReceiveFSM( void )
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
UCHAR ucByte;
|
||||
UCHAR ucResult;
|
||||
|
||||
assert( eSndState == STATE_TX_IDLE );
|
||||
|
||||
( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte );
|
||||
switch ( eRcvState )
|
||||
{
|
||||
/* A new character is received. If the character is a ':' the input
|
||||
* buffer is cleared. A CR-character signals the end of the data
|
||||
* block. Other characters are part of the data block and their
|
||||
* ASCII value is converted back to a binary representation.
|
||||
*/
|
||||
case STATE_RX_RCV:
|
||||
/* Enable timer for character timeout. */
|
||||
vMBPortTimersEnable( );
|
||||
if( ucByte == ':' )
|
||||
{
|
||||
/* Empty receive buffer. */
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
usRcvBufferPos = 0;
|
||||
}
|
||||
else if( ucByte == MB_ASCII_DEFAULT_CR )
|
||||
{
|
||||
eRcvState = STATE_RX_WAIT_EOF;
|
||||
}
|
||||
else
|
||||
{
|
||||
ucResult = prvucMBCHAR2BIN( ucByte );
|
||||
switch ( eBytePos )
|
||||
{
|
||||
/* High nibble of the byte comes first. We check for
|
||||
* a buffer overflow here. */
|
||||
case BYTE_HIGH_NIBBLE:
|
||||
if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX )
|
||||
{
|
||||
ucASCIIBuf[usRcvBufferPos] = ( UCHAR )( ucResult << 4 );
|
||||
eBytePos = BYTE_LOW_NIBBLE;
|
||||
break;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* not handled in Modbus specification but seems
|
||||
* a resonable implementation. */
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
/* Disable previously activated timer because of error state. */
|
||||
vMBPortTimersDisable( );
|
||||
}
|
||||
break;
|
||||
|
||||
case BYTE_LOW_NIBBLE:
|
||||
ucASCIIBuf[usRcvBufferPos++] |= ucResult;
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
break;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case STATE_RX_WAIT_EOF:
|
||||
if( ucByte == ucMBLFCharacter )
|
||||
{
|
||||
/* Disable character timeout timer because all characters are
|
||||
* received. */
|
||||
vMBPortTimersDisable( );
|
||||
/* Receiver is again in idle state. */
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
|
||||
/* Notify the caller of eMBASCIIReceive that a new frame
|
||||
* was received. */
|
||||
xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED );
|
||||
}
|
||||
else if( ucByte == ':' )
|
||||
{
|
||||
/* Empty receive buffer and back to receive state. */
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
usRcvBufferPos = 0;
|
||||
eRcvState = STATE_RX_RCV;
|
||||
|
||||
/* Enable timer for character timeout. */
|
||||
vMBPortTimersEnable( );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Frame is not okay. Delete entire frame. */
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
}
|
||||
break;
|
||||
|
||||
case STATE_RX_IDLE:
|
||||
if( ucByte == ':' )
|
||||
{
|
||||
/* Enable timer for character timeout. */
|
||||
vMBPortTimersEnable( );
|
||||
/* Reset the input buffers to store the frame. */
|
||||
usRcvBufferPos = 0;;
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
eRcvState = STATE_RX_RCV;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBASCIITransmitFSM( void )
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
UCHAR ucByte;
|
||||
|
||||
assert( eRcvState == STATE_RX_IDLE );
|
||||
switch ( eSndState )
|
||||
{
|
||||
/* Start of transmission. The start of a frame is defined by sending
|
||||
* the character ':'. */
|
||||
case STATE_TX_START:
|
||||
ucByte = ':';
|
||||
xMBPortSerialPutByte( ( CHAR )ucByte );
|
||||
eSndState = STATE_TX_DATA;
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
break;
|
||||
|
||||
/* Send the data block. Each data byte is encoded as a character hex
|
||||
* stream with the high nibble sent first and the low nibble sent
|
||||
* last. If all data bytes are exhausted we send a '\r' character
|
||||
* to end the transmission. */
|
||||
case STATE_TX_DATA:
|
||||
if( usSndBufferCount > 0 )
|
||||
{
|
||||
switch ( eBytePos )
|
||||
{
|
||||
case BYTE_HIGH_NIBBLE:
|
||||
ucByte = prvucMBBIN2CHAR( ( UCHAR )( *pucSndBufferCur >> 4 ) );
|
||||
xMBPortSerialPutByte( ( CHAR ) ucByte );
|
||||
eBytePos = BYTE_LOW_NIBBLE;
|
||||
break;
|
||||
|
||||
case BYTE_LOW_NIBBLE:
|
||||
ucByte = prvucMBBIN2CHAR( ( UCHAR )( *pucSndBufferCur & 0x0F ) );
|
||||
xMBPortSerialPutByte( ( CHAR )ucByte );
|
||||
pucSndBufferCur++;
|
||||
eBytePos = BYTE_HIGH_NIBBLE;
|
||||
usSndBufferCount--;
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
xMBPortSerialPutByte( MB_ASCII_DEFAULT_CR );
|
||||
eSndState = STATE_TX_END;
|
||||
}
|
||||
break;
|
||||
|
||||
/* Finish the frame by sending a LF character. */
|
||||
case STATE_TX_END:
|
||||
xMBPortSerialPutByte( ( CHAR )ucMBLFCharacter );
|
||||
/* We need another state to make sure that the CR character has
|
||||
* been sent. */
|
||||
eSndState = STATE_TX_NOTIFY;
|
||||
break;
|
||||
|
||||
/* Notify the task which called eMBASCIISend that the frame has
|
||||
* been sent. */
|
||||
case STATE_TX_NOTIFY:
|
||||
eSndState = STATE_TX_IDLE;
|
||||
xNeedPoll = xMBPortEventPost( EV_FRAME_SENT );
|
||||
|
||||
/* Disable transmitter. This prevents another transmit buffer
|
||||
* empty interrupt. */
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
eSndState = STATE_TX_IDLE;
|
||||
break;
|
||||
|
||||
/* We should not get a transmitter event if the transmitter is in
|
||||
* idle state. */
|
||||
case STATE_TX_IDLE:
|
||||
/* enable receiver/disable transmitter. */
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
break;
|
||||
}
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBASCIITimerT1SExpired( void )
|
||||
{
|
||||
switch ( eRcvState )
|
||||
{
|
||||
/* If we have a timeout we go back to the idle state and wait for
|
||||
* the next frame.
|
||||
*/
|
||||
case STATE_RX_RCV:
|
||||
case STATE_RX_WAIT_EOF:
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
break;
|
||||
|
||||
default:
|
||||
assert( ( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_WAIT_EOF ) );
|
||||
break;
|
||||
}
|
||||
vMBPortTimersDisable( );
|
||||
|
||||
/* no context switch required. */
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
|
||||
static UCHAR
|
||||
prvucMBCHAR2BIN( UCHAR ucCharacter )
|
||||
{
|
||||
if( ( ucCharacter >= '0' ) && ( ucCharacter <= '9' ) )
|
||||
{
|
||||
return ( UCHAR )( ucCharacter - '0' );
|
||||
}
|
||||
else if( ( ucCharacter >= 'A' ) && ( ucCharacter <= 'F' ) )
|
||||
{
|
||||
return ( UCHAR )( ucCharacter - 'A' + 0x0A );
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0xFF;
|
||||
}
|
||||
}
|
||||
|
||||
static UCHAR
|
||||
prvucMBBIN2CHAR( UCHAR ucByte )
|
||||
{
|
||||
if( ucByte <= 0x09 )
|
||||
{
|
||||
return ( UCHAR )( '0' + ucByte );
|
||||
}
|
||||
else if( ( ucByte >= 0x0A ) && ( ucByte <= 0x0F ) )
|
||||
{
|
||||
return ( UCHAR )( ucByte - 0x0A + 'A' );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Programming error. */
|
||||
assert( 0 );
|
||||
}
|
||||
return '0';
|
||||
}
|
||||
|
||||
|
||||
static UCHAR
|
||||
prvucMBLRC( UCHAR * pucFrame, USHORT usLen )
|
||||
{
|
||||
UCHAR ucLRC = 0; /* LRC char initialized */
|
||||
|
||||
while( usLen-- )
|
||||
{
|
||||
ucLRC += *pucFrame++; /* Add buffer byte without carry */
|
||||
}
|
||||
|
||||
/* Return twos complement */
|
||||
ucLRC = ( UCHAR ) ( -( ( CHAR ) ucLRC ) );
|
||||
return ucLRC;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,56 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbascii.h,v 1.8 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_ASCII_H
|
||||
#define _MB_ASCII_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
#if MB_SLAVE_ASCII_ENABLED > 0
|
||||
eMBErrorCode eMBASCIIInit( UCHAR slaveAddress, UCHAR ucPort,
|
||||
ULONG ulBaudRate, eMBParity eParity );
|
||||
void eMBASCIIStart( void );
|
||||
void eMBASCIIStop( void );
|
||||
|
||||
eMBErrorCode eMBASCIIReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame,
|
||||
USHORT * pusLength );
|
||||
eMBErrorCode eMBASCIISend( UCHAR slaveAddress, const UCHAR * pucFrame,
|
||||
USHORT usLength );
|
||||
BOOL xMBASCIIReceiveFSM( void );
|
||||
BOOL xMBASCIITransmitFSM( void );
|
||||
BOOL xMBASCIITimerT1SExpired( void );
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,269 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfunccoils.c,v 1.8 2007/02/18 23:47:16 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_COILCNT_MAX ( 0x07D0 )
|
||||
|
||||
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
||||
|
||||
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usCoilCount;
|
||||
UCHAR ucNBytes;
|
||||
UCHAR *pucFrameCur;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usCoilCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] << 8 );
|
||||
usCoilCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usCoilCount >= 1 ) &&
|
||||
( usCoilCount < MB_PDU_FUNC_READ_COILCNT_MAX ) )
|
||||
{
|
||||
/* Set the current PDU data pointer to the beginning. */
|
||||
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
||||
*usLen = MB_PDU_FUNC_OFF;
|
||||
|
||||
/* First byte contains the function code. */
|
||||
*pucFrameCur++ = MB_FUNC_READ_COILS;
|
||||
*usLen += 1;
|
||||
|
||||
/* Test if the quantity of coils is a multiple of 8. If not last
|
||||
* byte is only partially field with unused coils set to zero. */
|
||||
if( ( usCoilCount & 0x0007 ) != 0 )
|
||||
{
|
||||
ucNBytes = ( UCHAR )( usCoilCount / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucNBytes = ( UCHAR )( usCoilCount / 8 );
|
||||
}
|
||||
*pucFrameCur++ = ucNBytes;
|
||||
*usLen += 1;
|
||||
|
||||
eRegStatus =
|
||||
eMBRegCoilsCB( pucFrameCur, usRegAddress, usCoilCount,
|
||||
MB_REG_READ );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The response contains the function code, the starting address
|
||||
* and the quantity of registers. We reuse the old values in the
|
||||
* buffer because they are still valid. */
|
||||
*usLen += ucNBytes;;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid read coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_COIL_ENABLED > 0
|
||||
eMBException
|
||||
eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
UCHAR ucBuf[2];
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
|
||||
( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
|
||||
( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
|
||||
{
|
||||
ucBuf[1] = 0;
|
||||
if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
|
||||
{
|
||||
ucBuf[0] = 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
ucBuf[0] = 0;
|
||||
}
|
||||
eRegStatus =
|
||||
eMBRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid write coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
|
||||
eMBException
|
||||
eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usCoilCnt;
|
||||
UCHAR ucByteCount;
|
||||
UCHAR ucByteCountVerify;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen > ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
|
||||
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
|
||||
|
||||
ucByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
|
||||
|
||||
/* Compute the number of expected bytes in the request. */
|
||||
if( ( usCoilCnt & 0x0007 ) != 0 )
|
||||
{
|
||||
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
|
||||
}
|
||||
|
||||
if( ( usCoilCnt >= 1 ) &&
|
||||
( usCoilCnt <= MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ) &&
|
||||
( ucByteCountVerify == ucByteCount ) )
|
||||
{
|
||||
eRegStatus =
|
||||
eMBRegCoilsCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
|
||||
usRegAddress, usCoilCnt, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The response contains the function code, the starting address
|
||||
* and the quantity of registers. We reuse the old values in the
|
||||
* buffer because they are still valid. */
|
||||
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid write coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,390 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfunccoils_m.c,v 1.60 2013/10/12 15:10:12 Armink Add Master Functions
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
||||
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
|
||||
|
||||
#define MB_PDU_REQ_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_REQ_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_WRITE_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
||||
|
||||
#define MB_PDU_REQ_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_REQ_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_SIZE_MIN ( 5 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_SIZE ( 5 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request read coil.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usCoilAddr coil start address
|
||||
* @param usNCoils coil total number
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadCoils( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usNCoils ,LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_COILS;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usCoilAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usCoilAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF ] = usNCoils >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF + 1] = usNCoils;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReadCoils( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegAddress;
|
||||
USHORT usCoilCount;
|
||||
UCHAR ucByteCount;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
||||
if ( xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
eStatus = MB_EX_NONE;
|
||||
}
|
||||
else if ( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usCoilCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF] << 8 );
|
||||
usCoilCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF + 1] );
|
||||
|
||||
/* Test if the quantity of coils is a multiple of 8. If not last
|
||||
* byte is only partially field with unused coils set to zero. */
|
||||
if( ( usCoilCount & 0x0007 ) != 0 )
|
||||
{
|
||||
ucByteCount = ( UCHAR )( usCoilCount / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucByteCount = ( UCHAR )( usCoilCount / 8 );
|
||||
}
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usCoilCount >= 1 ) &&
|
||||
( ucByteCount == pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] ) )
|
||||
{
|
||||
/* Make callback to fill the buffer. */
|
||||
eRegStatus = eMBMasterRegCoilsCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usCoilCount, MB_REG_READ );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid read coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_COIL_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request write one coil.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usCoilAddr coil start address
|
||||
* @param usCoilData data to be written
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*
|
||||
* @see eMBMasterReqWriteMultipleCoils
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteCoil( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usCoilData, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( ( usCoilData != 0xFF00 ) && ( usCoilData != 0x0000 ) ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_SINGLE_COIL;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF] = usCoilAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF + 1] = usCoilAddr;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF ] = usCoilData >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF + 1] = usCoilData;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
UCHAR ucBuf[2];
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
|
||||
( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
|
||||
( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
|
||||
{
|
||||
ucBuf[1] = 0;
|
||||
if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
|
||||
{
|
||||
ucBuf[0] = 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
ucBuf[0] = 0;
|
||||
}
|
||||
eRegStatus =
|
||||
eMBMasterRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid write coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request write multiple coils.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usCoilAddr coil start address
|
||||
* @param usNCoils coil total number
|
||||
* @param usCoilData data to be written
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*
|
||||
* @see eMBMasterReqWriteCoil
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteMultipleCoils( UCHAR ucSndAddr,
|
||||
USHORT usCoilAddr, USHORT usNCoils, UCHAR * pucDataBuffer, LONG lTimeOut)
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegIndex = 0;
|
||||
UCHAR ucByteCount;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( usNCoils > MB_PDU_REQ_WRITE_MUL_COILCNT_MAX ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_MULTIPLE_COILS;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] = usCoilAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] = usCoilAddr;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_COILCNT_OFF] = usNCoils >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_COILCNT_OFF + 1] = usNCoils ;
|
||||
if( ( usNCoils & 0x0007 ) != 0 )
|
||||
{
|
||||
ucByteCount = ( UCHAR )( usNCoils / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucByteCount = ( UCHAR )( usNCoils / 8 );
|
||||
}
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF] = ucByteCount;
|
||||
ucMBFrame += MB_PDU_REQ_WRITE_MUL_VALUES_OFF;
|
||||
while( ucByteCount > usRegIndex)
|
||||
{
|
||||
*ucMBFrame++ = pucDataBuffer[usRegIndex++];
|
||||
}
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_MUL_SIZE_MIN + ucByteCount );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usCoilCnt;
|
||||
UCHAR ucByteCount;
|
||||
UCHAR ucByteCountVerify;
|
||||
UCHAR *ucMBFrame;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, the *usLen is not need check. */
|
||||
if( ( *usLen == MB_PDU_FUNC_WRITE_MUL_SIZE ) || xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
|
||||
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
|
||||
|
||||
ucByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
|
||||
|
||||
/* Compute the number of expected bytes in the request. */
|
||||
if( ( usCoilCnt & 0x0007 ) != 0 )
|
||||
{
|
||||
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
|
||||
}
|
||||
|
||||
if( ( usCoilCnt >= 1 ) && ( ucByteCountVerify == ucByteCount ) )
|
||||
{
|
||||
eRegStatus =
|
||||
eMBMasterRegCoilsCB( &ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
|
||||
usRegAddress, usCoilCnt, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid write coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif
|
|
@ -1,29 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncdiag.c,v 1.3 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
|
@ -1,125 +0,0 @@
|
|||
/*
|
||||
* FreeRTOS Modbus Libary: A Modbus serial implementation for FreeRTOS
|
||||
* Copyright (C) 2006 Christian Walter <wolti@sil.at>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_READ_DISCCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_DISCCNT_MAX ( 0x07D0 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usDiscreteCnt;
|
||||
UCHAR ucNBytes;
|
||||
UCHAR *pucFrameCur;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usDiscreteCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF] << 8 );
|
||||
usDiscreteCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usDiscreteCnt >= 1 ) &&
|
||||
( usDiscreteCnt < MB_PDU_FUNC_READ_DISCCNT_MAX ) )
|
||||
{
|
||||
/* Set the current PDU data pointer to the beginning. */
|
||||
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
||||
*usLen = MB_PDU_FUNC_OFF;
|
||||
|
||||
/* First byte contains the function code. */
|
||||
*pucFrameCur++ = MB_FUNC_READ_DISCRETE_INPUTS;
|
||||
*usLen += 1;
|
||||
|
||||
/* Test if the quantity of coils is a multiple of 8. If not last
|
||||
* byte is only partially field with unused coils set to zero. */
|
||||
if( ( usDiscreteCnt & 0x0007 ) != 0 )
|
||||
{
|
||||
ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 );
|
||||
}
|
||||
*pucFrameCur++ = ucNBytes;
|
||||
*usLen += 1;
|
||||
|
||||
eRegStatus =
|
||||
eMBRegDiscreteCB( pucFrameCur, usRegAddress, usDiscreteCnt );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The response contains the function code, the starting address
|
||||
* and the quantity of registers. We reuse the old values in the
|
||||
* buffer because they are still valid. */
|
||||
*usLen += ucNBytes;;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid read coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,162 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncdisc_m.c,v 1.60 2013/10/15 8:48:20 Armink Add Master Functions Exp $
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_READ_DISCCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_DISCCNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
||||
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request read discrete inputs.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usDiscreteAddr discrete start address
|
||||
* @param usNDiscreteIn discrete total number
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadDiscreteInputs( UCHAR ucSndAddr, USHORT usDiscreteAddr, USHORT usNDiscreteIn, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_DISCRETE_INPUTS;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usDiscreteAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usDiscreteAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READ_DISCCNT_OFF ] = usNDiscreteIn >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_DISCCNT_OFF + 1] = usNDiscreteIn;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usDiscreteCnt;
|
||||
UCHAR ucNBytes;
|
||||
UCHAR *ucMBFrame;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
||||
if ( xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
eStatus = MB_EX_NONE;
|
||||
}
|
||||
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usDiscreteCnt = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_DISCCNT_OFF] << 8 );
|
||||
usDiscreteCnt |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_DISCCNT_OFF + 1] );
|
||||
|
||||
/* Test if the quantity of coils is a multiple of 8. If not last
|
||||
* byte is only partially field with unused coils set to zero. */
|
||||
if( ( usDiscreteCnt & 0x0007 ) != 0 )
|
||||
{
|
||||
ucNBytes = ( UCHAR )( usDiscreteCnt / 8 + 1 );
|
||||
}
|
||||
else
|
||||
{
|
||||
ucNBytes = ( UCHAR )( usDiscreteCnt / 8 );
|
||||
}
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if ((usDiscreteCnt >= 1) && ucNBytes == pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF])
|
||||
{
|
||||
/* Make callback to fill the buffer. */
|
||||
eRegStatus = eMBMasterRegDiscreteCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usDiscreteCnt );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid read coil register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif
|
|
@ -1,308 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncholding.c,v 1.12 2007/02/18 23:48:22 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
||||
#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
|
||||
|
||||
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
||||
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
||||
|
||||
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ( 0x0078 )
|
||||
|
||||
#define MB_PDU_FUNC_READWRITE_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF ( MB_PDU_DATA_OFF + 6 )
|
||||
#define MB_PDU_FUNC_READWRITE_BYTECNT_OFF ( MB_PDU_DATA_OFF + 8 )
|
||||
#define MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF ( MB_PDU_DATA_OFF + 9 )
|
||||
#define MB_PDU_FUNC_READWRITE_SIZE_MIN ( 9 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
|
||||
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
/* Make callback to update the value. */
|
||||
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
|
||||
usRegAddress, 1, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
||||
eMBException
|
||||
eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
UCHAR ucRegByteCount;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen >= ( MB_PDU_FUNC_WRITE_MUL_SIZE_MIN + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF + 1] );
|
||||
|
||||
ucRegByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
|
||||
|
||||
if( ( usRegCount >= 1 ) &&
|
||||
( usRegCount <= MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ) &&
|
||||
( ucRegByteCount == ( UCHAR ) ( 2 * usRegCount ) ) )
|
||||
{
|
||||
/* Make callback to update the register values. */
|
||||
eRegStatus =
|
||||
eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
|
||||
usRegAddress, usRegCount, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The response contains the function code, the starting
|
||||
* address and the quantity of registers. We reuse the
|
||||
* old values in the buffer because they are still valid.
|
||||
*/
|
||||
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
UCHAR *pucFrameCur;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usRegCount >= 1 ) && ( usRegCount <= MB_PDU_FUNC_READ_REGCNT_MAX ) )
|
||||
{
|
||||
/* Set the current PDU data pointer to the beginning. */
|
||||
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
||||
*usLen = MB_PDU_FUNC_OFF;
|
||||
|
||||
/* First byte contains the function code. */
|
||||
*pucFrameCur++ = MB_FUNC_READ_HOLDING_REGISTER;
|
||||
*usLen += 1;
|
||||
|
||||
/* Second byte in the response contain the number of bytes. */
|
||||
*pucFrameCur++ = ( UCHAR ) ( usRegCount * 2 );
|
||||
*usLen += 1;
|
||||
|
||||
/* Make callback to fill the buffer. */
|
||||
eRegStatus = eMBRegHoldingCB( pucFrameCur, usRegAddress, usRegCount, MB_REG_READ );
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
*usLen += usRegCount * 2;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegReadAddress;
|
||||
USHORT usRegReadCount;
|
||||
USHORT usRegWriteAddress;
|
||||
USHORT usRegWriteCount;
|
||||
UCHAR ucRegWriteByteCount;
|
||||
UCHAR *pucFrameCur;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen >= ( MB_PDU_FUNC_READWRITE_SIZE_MIN + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegReadAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF] << 8U );
|
||||
usRegReadAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF + 1] );
|
||||
usRegReadAddress++;
|
||||
|
||||
usRegReadCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF] << 8U );
|
||||
usRegReadCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF + 1] );
|
||||
|
||||
usRegWriteAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF] << 8U );
|
||||
usRegWriteAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF + 1] );
|
||||
usRegWriteAddress++;
|
||||
|
||||
usRegWriteCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF] << 8U );
|
||||
usRegWriteCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF + 1] );
|
||||
|
||||
ucRegWriteByteCount = pucFrame[MB_PDU_FUNC_READWRITE_BYTECNT_OFF];
|
||||
|
||||
if( ( usRegReadCount >= 1 ) && ( usRegReadCount <= 0x7D ) &&
|
||||
( usRegWriteCount >= 1 ) && ( usRegWriteCount <= 0x79 ) &&
|
||||
( ( 2 * usRegWriteCount ) == ucRegWriteByteCount ) )
|
||||
{
|
||||
/* Make callback to update the register values. */
|
||||
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF],
|
||||
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
|
||||
|
||||
if( eRegStatus == MB_ENOERR )
|
||||
{
|
||||
/* Set the current PDU data pointer to the beginning. */
|
||||
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
||||
*usLen = MB_PDU_FUNC_OFF;
|
||||
|
||||
/* First byte contains the function code. */
|
||||
*pucFrameCur++ = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
|
||||
*usLen += 1;
|
||||
|
||||
/* Second byte in the response contain the number of bytes. */
|
||||
*pucFrameCur++ = ( UCHAR ) ( usRegReadCount * 2 );
|
||||
*usLen += 1;
|
||||
|
||||
/* Make the read callback. */
|
||||
eRegStatus =
|
||||
eMBRegHoldingCB( pucFrameCur, usRegReadAddress, usRegReadCount, MB_REG_READ );
|
||||
if( eRegStatus == MB_ENOERR )
|
||||
{
|
||||
*usLen += 2 * usRegReadCount;
|
||||
}
|
||||
}
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,455 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncholding_m.c,v 1.60 2013/09/02 14:13:40 Armink Add Master Functions Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
|
||||
#define MB_PDU_FUNC_READ_BYTECNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
||||
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
|
||||
|
||||
#define MB_PDU_REQ_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
||||
#define MB_PDU_REQ_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_WRITE_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
||||
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
||||
|
||||
#define MB_PDU_REQ_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_SIZE_MIN ( 5 )
|
||||
#define MB_PDU_REQ_WRITE_MUL_REGCNT_MAX ( 0x0078 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_WRITE_MUL_SIZE ( 4 )
|
||||
|
||||
#define MB_PDU_REQ_READWRITE_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_READWRITE_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 4 )
|
||||
#define MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF ( MB_PDU_DATA_OFF + 6 )
|
||||
#define MB_PDU_REQ_READWRITE_WRITE_BYTECNT_OFF ( MB_PDU_DATA_OFF + 8 )
|
||||
#define MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF ( MB_PDU_DATA_OFF + 9 )
|
||||
#define MB_PDU_REQ_READWRITE_SIZE_MIN ( 9 )
|
||||
#define MB_PDU_FUNC_READWRITE_READ_BYTECNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READWRITE_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
||||
#define MB_PDU_FUNC_READWRITE_SIZE_MIN ( 1 )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request write holding register.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usRegAddr register start address
|
||||
* @param usRegData register data to be written
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usRegData, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_REGISTER;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF] = usRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF + 1] = usRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF] = usRegData >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF + 1] = usRegData ;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_SIZE_MIN + MB_PDU_FUNC_WRITE_SIZE ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
/* Make callback to update the value. */
|
||||
eRegStatus = eMBMasterRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
|
||||
usRegAddress, 1, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request write multiple holding register.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usRegAddr register start address
|
||||
* @param usNRegs register total number
|
||||
* @param pusDataBuffer data to be written
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteMultipleHoldingRegister( UCHAR ucSndAddr,
|
||||
USHORT usRegAddr, USHORT usNRegs, USHORT * pusDataBuffer, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegIndex = 0;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_MULTIPLE_REGISTERS;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] = usRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] = usRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF] = usNRegs >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF + 1] = usNRegs ;
|
||||
ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF] = usNRegs * 2;
|
||||
ucMBFrame += MB_PDU_REQ_WRITE_MUL_VALUES_OFF;
|
||||
while( usNRegs > usRegIndex)
|
||||
{
|
||||
*ucMBFrame++ = pusDataBuffer[usRegIndex] >> 8;
|
||||
*ucMBFrame++ = pusDataBuffer[usRegIndex++] ;
|
||||
}
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_MUL_SIZE_MIN + 2*usNRegs );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
UCHAR ucRegByteCount;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, the *usLen is not need check. */
|
||||
if( ( *usLen == MB_PDU_SIZE_MIN + MB_PDU_FUNC_WRITE_MUL_SIZE ) || xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF + 1] );
|
||||
|
||||
ucRegByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
|
||||
|
||||
if( ucRegByteCount == 2 * usRegCount )
|
||||
{
|
||||
/* Make callback to update the register values. */
|
||||
eRegStatus =
|
||||
eMBMasterRegHoldingCB( &ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
|
||||
usRegAddress, usRegCount, MB_REG_WRITE );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request read holding register.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usRegAddr register start address
|
||||
* @param usNRegs register total number
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usNRegs, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_HOLDING_REGISTER;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] = usNRegs >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] = usNRegs;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
||||
if ( xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
eStatus = MB_EX_NONE;
|
||||
}
|
||||
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usRegCount >= 1 ) && ( 2 * usRegCount == pucFrame[MB_PDU_FUNC_READ_BYTECNT_OFF] ) )
|
||||
{
|
||||
/* Make callback to fill the buffer. */
|
||||
eRegStatus = eMBMasterRegHoldingCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usRegCount, MB_REG_READ );
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request read and write holding register.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usReadRegAddr read register start address
|
||||
* @param usNReadRegs read register total number
|
||||
* @param pusDataBuffer data to be written
|
||||
* @param usWriteRegAddr write register start address
|
||||
* @param usNWriteRegs write register total number
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadWriteMultipleHoldingRegister( UCHAR ucSndAddr,
|
||||
USHORT usReadRegAddr, USHORT usNReadRegs, USHORT * pusDataBuffer,
|
||||
USHORT usWriteRegAddr, USHORT usNWriteRegs, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegIndex = 0;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF] = usReadRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF + 1] = usReadRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF] = usNReadRegs >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF + 1] = usNReadRegs ;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF] = usWriteRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF + 1] = usWriteRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF] = usNWriteRegs >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF + 1] = usNWriteRegs ;
|
||||
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_BYTECNT_OFF] = usNWriteRegs * 2;
|
||||
ucMBFrame += MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF;
|
||||
while( usNWriteRegs > usRegIndex)
|
||||
{
|
||||
*ucMBFrame++ = pusDataBuffer[usRegIndex] >> 8;
|
||||
*ucMBFrame++ = pusDataBuffer[usRegIndex++] ;
|
||||
}
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READWRITE_SIZE_MIN + 2*usNWriteRegs );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegReadAddress;
|
||||
USHORT usRegReadCount;
|
||||
USHORT usRegWriteAddress;
|
||||
USHORT usRegWriteCount;
|
||||
UCHAR *ucMBFrame;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
||||
if ( xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
eStatus = MB_EX_NONE;
|
||||
}
|
||||
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READWRITE_SIZE_MIN )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegReadAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF] << 8U );
|
||||
usRegReadAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF + 1] );
|
||||
usRegReadAddress++;
|
||||
|
||||
usRegReadCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF] << 8U );
|
||||
usRegReadCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF + 1] );
|
||||
|
||||
usRegWriteAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF] << 8U );
|
||||
usRegWriteAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF + 1] );
|
||||
usRegWriteAddress++;
|
||||
|
||||
usRegWriteCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF] << 8U );
|
||||
usRegWriteCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF + 1] );
|
||||
|
||||
if( ( 2 * usRegReadCount ) == pucFrame[MB_PDU_FUNC_READWRITE_READ_BYTECNT_OFF] )
|
||||
{
|
||||
/* Make callback to update the register values. */
|
||||
eRegStatus = eMBMasterRegHoldingCB( &ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF],
|
||||
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
|
||||
|
||||
if( eRegStatus == MB_ENOERR )
|
||||
{
|
||||
/* Make the read callback. */
|
||||
eRegStatus = eMBMasterRegHoldingCB(&pucFrame[MB_PDU_FUNC_READWRITE_READ_VALUES_OFF],
|
||||
usRegReadAddress, usRegReadCount, MB_REG_READ);
|
||||
}
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1,122 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncinput.c,v 1.10 2007/09/12 10:15:56 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
|
||||
#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_FUNC_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
|
||||
|
||||
#define MB_PDU_FUNC_READ_RSP_BYTECNT_OFF ( MB_PDU_DATA_OFF )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
#if MB_FUNC_READ_INPUT_ENABLED > 0
|
||||
|
||||
eMBException
|
||||
eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
UCHAR *pucFrameCur;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
|
||||
{
|
||||
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usRegCount >= 1 )
|
||||
&& ( usRegCount < MB_PDU_FUNC_READ_REGCNT_MAX ) )
|
||||
{
|
||||
/* Set the current PDU data pointer to the beginning. */
|
||||
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
||||
*usLen = MB_PDU_FUNC_OFF;
|
||||
|
||||
/* First byte contains the function code. */
|
||||
*pucFrameCur++ = MB_FUNC_READ_INPUT_REGISTER;
|
||||
*usLen += 1;
|
||||
|
||||
/* Second byte in the response contain the number of bytes. */
|
||||
*pucFrameCur++ = ( UCHAR )( usRegCount * 2 );
|
||||
*usLen += 1;
|
||||
|
||||
eRegStatus =
|
||||
eMBRegInputCB( pucFrameCur, usRegAddress, usRegCount );
|
||||
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
else
|
||||
{
|
||||
*usLen += usRegCount * 2;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid read input register request because the length
|
||||
* is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,148 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncinput_m.c,v 1.60 2013/10/12 14:23:40 Armink Add Master Functions Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_REQ_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
||||
#define MB_PDU_REQ_READ_SIZE ( 4 )
|
||||
#define MB_PDU_FUNC_READ_BYTECNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
||||
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
||||
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
|
||||
|
||||
#define MB_PDU_FUNC_READ_RSP_BYTECNT_OFF ( MB_PDU_DATA_OFF )
|
||||
|
||||
/* ----------------------- Static functions ---------------------------------*/
|
||||
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
#if MB_FUNC_READ_INPUT_ENABLED > 0
|
||||
|
||||
/**
|
||||
* This function will request read input register.
|
||||
*
|
||||
* @param ucSndAddr salve address
|
||||
* @param usRegAddr register start address
|
||||
* @param usNRegs register total number
|
||||
* @param lTimeOut timeout (-1 will waiting forever)
|
||||
*
|
||||
* @return error code
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadInputRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usNRegs, LONG lTimeOut )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
|
||||
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
||||
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
||||
else
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
vMBMasterSetDestAddress(ucSndAddr);
|
||||
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_INPUT_REGISTER;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usRegAddr >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usRegAddr;
|
||||
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] = usNRegs >> 8;
|
||||
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] = usNRegs;
|
||||
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_SENT );
|
||||
eErrStatus = eMBMasterWaitRequestFinish( );
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
UCHAR *ucMBFrame;
|
||||
USHORT usRegAddress;
|
||||
USHORT usRegCount;
|
||||
|
||||
eMBException eStatus = MB_EX_NONE;
|
||||
eMBErrorCode eRegStatus;
|
||||
|
||||
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
||||
if ( xMBMasterRequestIsBroadcast() )
|
||||
{
|
||||
eStatus = MB_EX_NONE;
|
||||
}
|
||||
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
|
||||
{
|
||||
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
||||
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
|
||||
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
|
||||
usRegAddress++;
|
||||
|
||||
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] << 8 );
|
||||
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] );
|
||||
|
||||
/* Check if the number of registers to read is valid. If not
|
||||
* return Modbus illegal data value exception.
|
||||
*/
|
||||
if( ( usRegCount >= 1 ) && ( 2 * usRegCount == pucFrame[MB_PDU_FUNC_READ_BYTECNT_OFF] ) )
|
||||
{
|
||||
/* Make callback to fill the buffer. */
|
||||
eRegStatus = eMBMasterRegInputCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usRegCount );
|
||||
/* If an error occured convert it into a Modbus exception. */
|
||||
if( eRegStatus != MB_ENOERR )
|
||||
{
|
||||
eStatus = prveMBError2Exception( eRegStatus );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Can't be a valid request because the length is incorrect. */
|
||||
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif
|
|
@ -1,88 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfuncother.c,v 1.8 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbconfig.h"
|
||||
|
||||
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
static UCHAR ucMBSlaveID[MB_FUNC_OTHER_REP_SLAVEID_BUF];
|
||||
static USHORT usMBSlaveIDLen;
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
|
||||
eMBErrorCode
|
||||
eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
|
||||
UCHAR const *pucAdditional, USHORT usAdditionalLen )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
/* the first byte and second byte in the buffer is reserved for
|
||||
* the parameter ucSlaveID and the running flag. The rest of
|
||||
* the buffer is available for additional data. */
|
||||
if( usAdditionalLen + 2 < MB_FUNC_OTHER_REP_SLAVEID_BUF )
|
||||
{
|
||||
usMBSlaveIDLen = 0;
|
||||
ucMBSlaveID[usMBSlaveIDLen++] = ucSlaveID;
|
||||
ucMBSlaveID[usMBSlaveIDLen++] = ( UCHAR )( xIsRunning ? 0xFF : 0x00 );
|
||||
if( usAdditionalLen > 0 )
|
||||
{
|
||||
memcpy( &ucMBSlaveID[usMBSlaveIDLen], pucAdditional,
|
||||
( size_t )usAdditionalLen );
|
||||
usMBSlaveIDLen += usAdditionalLen;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENORES;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBException
|
||||
eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen )
|
||||
{
|
||||
memcpy( &pucFrame[MB_PDU_DATA_OFF], &ucMBSlaveID[0], ( size_t )usMBSlaveIDLen );
|
||||
*usLen = ( USHORT )( MB_PDU_DATA_OFF + usMBSlaveIDLen );
|
||||
return MB_EX_NONE;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,141 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbutils.c,v 1.6 2007/02/18 23:49:07 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbproto.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define BITS_UCHAR 8U
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
void
|
||||
xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits,
|
||||
UCHAR ucValue )
|
||||
{
|
||||
USHORT usWordBuf;
|
||||
USHORT usMask;
|
||||
USHORT usByteOffset;
|
||||
USHORT usNPreBits;
|
||||
USHORT usValue = ucValue;
|
||||
|
||||
RT_ASSERT( ucNBits <= 8 );
|
||||
RT_ASSERT( ( size_t )BITS_UCHAR == sizeof( UCHAR ) * 8 );
|
||||
|
||||
/* Calculate byte offset for first byte containing the bit values starting
|
||||
* at usBitOffset. */
|
||||
usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
|
||||
|
||||
/* How many bits precede our bits to set. */
|
||||
usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
|
||||
|
||||
/* Move bit field into position over bits to set */
|
||||
usValue <<= usNPreBits;
|
||||
|
||||
/* Prepare a mask for setting the new bits. */
|
||||
usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
|
||||
usMask <<= usBitOffset - usByteOffset * BITS_UCHAR;
|
||||
|
||||
/* copy bits into temporary storage. */
|
||||
usWordBuf = ucByteBuf[usByteOffset];
|
||||
usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
|
||||
|
||||
/* Zero out bit field bits and then or value bits into them. */
|
||||
usWordBuf = ( USHORT )( ( usWordBuf & ( ~usMask ) ) | usValue );
|
||||
|
||||
/* move bits back into storage */
|
||||
ucByteBuf[usByteOffset] = ( UCHAR )( usWordBuf & 0xFF );
|
||||
ucByteBuf[usByteOffset + 1] = ( UCHAR )( usWordBuf >> BITS_UCHAR );
|
||||
}
|
||||
|
||||
UCHAR
|
||||
xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits )
|
||||
{
|
||||
USHORT usWordBuf;
|
||||
USHORT usMask;
|
||||
USHORT usByteOffset;
|
||||
USHORT usNPreBits;
|
||||
|
||||
/* Calculate byte offset for first byte containing the bit values starting
|
||||
* at usBitOffset. */
|
||||
usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
|
||||
|
||||
/* How many bits precede our bits to set. */
|
||||
usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
|
||||
|
||||
/* Prepare a mask for setting the new bits. */
|
||||
usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
|
||||
|
||||
/* copy bits into temporary storage. */
|
||||
usWordBuf = ucByteBuf[usByteOffset];
|
||||
usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
|
||||
|
||||
/* throw away unneeded bits. */
|
||||
usWordBuf >>= usNPreBits;
|
||||
|
||||
/* mask away bits above the requested bitfield. */
|
||||
usWordBuf &= usMask;
|
||||
|
||||
return ( UCHAR ) usWordBuf;
|
||||
}
|
||||
|
||||
eMBException
|
||||
prveMBError2Exception( eMBErrorCode eErrorCode )
|
||||
{
|
||||
eMBException eStatus;
|
||||
|
||||
switch ( eErrorCode )
|
||||
{
|
||||
case MB_ENOERR:
|
||||
eStatus = MB_EX_NONE;
|
||||
break;
|
||||
|
||||
case MB_ENOREG:
|
||||
eStatus = MB_EX_ILLEGAL_DATA_ADDRESS;
|
||||
break;
|
||||
|
||||
case MB_ETIMEDOUT:
|
||||
eStatus = MB_EX_SLAVE_BUSY;
|
||||
break;
|
||||
|
||||
default:
|
||||
eStatus = MB_EX_SLAVE_DEVICE_FAILURE;
|
||||
break;
|
||||
}
|
||||
|
||||
return eStatus;
|
||||
}
|
|
@ -1,417 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mb.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_H
|
||||
#define _MB_H
|
||||
|
||||
#include "port.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
#include "mbport.h"
|
||||
#include "mbproto.h"
|
||||
|
||||
/*! \defgroup modbus Modbus
|
||||
* \code #include "mb.h" \endcode
|
||||
*
|
||||
* This module defines the interface for the application. It contains
|
||||
* the basic functions and types required to use the Modbus protocol stack.
|
||||
* A typical application will want to call eMBInit() first. If the device
|
||||
* is ready to answer network requests it must then call eMBEnable() to activate
|
||||
* the protocol stack. In the main loop the function eMBPoll() must be called
|
||||
* periodically. The time interval between pooling depends on the configured
|
||||
* Modbus timeout. If an RTOS is available a separate task should be created
|
||||
* and the task should always call the function eMBPoll().
|
||||
*
|
||||
* \code
|
||||
* // Initialize protocol stack in RTU mode for a slave with address 10 = 0x0A
|
||||
* eMBInit( MB_RTU, 0x0A, 38400, MB_PAR_EVEN );
|
||||
* // Enable the Modbus Protocol Stack.
|
||||
* eMBEnable( );
|
||||
* for( ;; )
|
||||
* {
|
||||
* // Call the main polling loop of the Modbus protocol stack.
|
||||
* eMBPoll( );
|
||||
* ...
|
||||
* }
|
||||
* \endcode
|
||||
*/
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Use the default Modbus TCP port (502)
|
||||
*/
|
||||
#define MB_TCP_PORT_USE_DEFAULT 0
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Modbus serial transmission modes (RTU/ASCII).
|
||||
*
|
||||
* Modbus serial supports two transmission modes. Either ASCII or RTU. RTU
|
||||
* is faster but has more hardware requirements and requires a network with
|
||||
* a low jitter. ASCII is slower and more reliable on slower links (E.g. modems)
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_RTU, /*!< RTU transmission mode. */
|
||||
MB_ASCII, /*!< ASCII transmission mode. */
|
||||
MB_TCP /*!< TCP mode. */
|
||||
} eMBMode;
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief If register should be written or read.
|
||||
*
|
||||
* This value is passed to the callback functions which support either
|
||||
* reading or writing register values. Writing means that the application
|
||||
* registers should be updated and reading means that the modbus protocol
|
||||
* stack needs to know the current register values.
|
||||
*
|
||||
* \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and
|
||||
* eMBRegInputCB( ).
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_REG_READ, /*!< Read register values and pass to protocol stack. */
|
||||
MB_REG_WRITE /*!< Update register values. */
|
||||
} eMBRegisterMode;
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Errorcodes used by all function in the protocol stack.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_ENOERR, /*!< no error. */
|
||||
MB_ENOREG, /*!< illegal register address. */
|
||||
MB_EINVAL, /*!< illegal argument. */
|
||||
MB_EPORTERR, /*!< porting layer error. */
|
||||
MB_ENORES, /*!< insufficient resources. */
|
||||
MB_EIO, /*!< I/O error. */
|
||||
MB_EILLSTATE, /*!< protocol stack in illegal state. */
|
||||
MB_ETIMEDOUT /*!< timeout error occurred. */
|
||||
} eMBErrorCode;
|
||||
|
||||
|
||||
/* ----------------------- Function prototypes ------------------------------*/
|
||||
/*! \ingroup modbus
|
||||
* \brief Initialize the Modbus protocol stack.
|
||||
*
|
||||
* This functions initializes the ASCII or RTU module and calls the
|
||||
* init functions of the porting layer to prepare the hardware. Please
|
||||
* note that the receiver is still disabled and no Modbus frames are
|
||||
* processed until eMBEnable( ) has been called.
|
||||
*
|
||||
* \param eMode If ASCII or RTU mode should be used.
|
||||
* \param ucSlaveAddress The slave address. Only frames sent to this
|
||||
* address or to the broadcast address are processed.
|
||||
* \param ucPort The port to use. E.g. 1 for COM1 on windows. This value
|
||||
* is platform dependent and some ports simply choose to ignore it.
|
||||
* \param ulBaudRate The baudrate. E.g. 19200. Supported baudrates depend
|
||||
* on the porting layer.
|
||||
* \param eParity Parity used for serial transmission.
|
||||
*
|
||||
* \return If no error occurs the function returns eMBErrorCode::MB_ENOERR.
|
||||
* The protocol is then in the disabled state and ready for activation
|
||||
* by calling eMBEnable( ). Otherwise one of the following error codes
|
||||
* is returned:
|
||||
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
|
||||
* slave addresses are in the range 1 - 247.
|
||||
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
|
||||
*/
|
||||
eMBErrorCode eMBInit( eMBMode eMode, UCHAR ucSlaveAddress,
|
||||
UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Initialize the Modbus protocol stack for Modbus TCP.
|
||||
*
|
||||
* This function initializes the Modbus TCP Module. Please note that
|
||||
* frame processing is still disabled until eMBEnable( ) is called.
|
||||
*
|
||||
* \param usTCPPort The TCP port to listen on.
|
||||
* \return If the protocol stack has been initialized correctly the function
|
||||
* returns eMBErrorCode::MB_ENOERR. Otherwise one of the following error
|
||||
* codes is returned:
|
||||
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
|
||||
* slave addresses are in the range 1 - 247.
|
||||
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
|
||||
*/
|
||||
eMBErrorCode eMBTCPInit( USHORT usTCPPort );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Release resources used by the protocol stack.
|
||||
*
|
||||
* This function disables the Modbus protocol stack and release all
|
||||
* hardware resources. It must only be called when the protocol stack
|
||||
* is disabled.
|
||||
*
|
||||
* \note Note all ports implement this function. A port which wants to
|
||||
* get an callback must define the macro MB_PORT_HAS_CLOSE to 1.
|
||||
*
|
||||
* \return If the resources where released it return eMBErrorCode::MB_ENOERR.
|
||||
* If the protocol stack is not in the disabled state it returns
|
||||
* eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBClose( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Enable the Modbus protocol stack.
|
||||
*
|
||||
* This function enables processing of Modbus frames. Enabling the protocol
|
||||
* stack is only possible if it is in the disabled state.
|
||||
*
|
||||
* \return If the protocol stack is now in the state enabled it returns
|
||||
* eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
|
||||
* return eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBEnable( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Disable the Modbus protocol stack.
|
||||
*
|
||||
* This function disables processing of Modbus frames.
|
||||
*
|
||||
* \return If the protocol stack has been disabled it returns
|
||||
* eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns
|
||||
* eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBDisable( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief The main pooling loop of the Modbus protocol stack.
|
||||
*
|
||||
* This function must be called periodically. The timer interval required
|
||||
* is given by the application dependent Modbus slave timeout. Internally the
|
||||
* function calls xMBPortEventGet() and waits for an event from the receiver or
|
||||
* transmitter state machines.
|
||||
*
|
||||
* \return If the protocol stack is not in the enabled state the function
|
||||
* returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
|
||||
* eMBErrorCode::MB_ENOERR.
|
||||
*/
|
||||
eMBErrorCode eMBPoll( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Configure the slave id of the device.
|
||||
*
|
||||
* This function should be called when the Modbus function <em>Report Slave ID</em>
|
||||
* is enabled ( By defining MB_FUNC_OTHER_REP_SLAVEID_ENABLED in mbconfig.h ).
|
||||
*
|
||||
* \param ucSlaveID Values is returned in the <em>Slave ID</em> byte of the
|
||||
* <em>Report Slave ID</em> response.
|
||||
* \param xIsRunning If TRUE the <em>Run Indicator Status</em> byte is set to 0xFF.
|
||||
* otherwise the <em>Run Indicator Status</em> is 0x00.
|
||||
* \param pucAdditional Values which should be returned in the <em>Additional</em>
|
||||
* bytes of the <em> Report Slave ID</em> response.
|
||||
* \param usAdditionalLen Length of the buffer <code>pucAdditonal</code>.
|
||||
*
|
||||
* \return If the static buffer defined by MB_FUNC_OTHER_REP_SLAVEID_BUF in
|
||||
* mbconfig.h is to small it returns eMBErrorCode::MB_ENORES. Otherwise
|
||||
* it returns eMBErrorCode::MB_ENOERR.
|
||||
*/
|
||||
eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
|
||||
UCHAR const *pucAdditional,
|
||||
USHORT usAdditionalLen );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Registers a callback handler for a given function code.
|
||||
*
|
||||
* This function registers a new callback handler for a given function code.
|
||||
* The callback handler supplied is responsible for interpreting the Modbus PDU and
|
||||
* the creation of an appropriate response. In case of an error it should return
|
||||
* one of the possible Modbus exceptions which results in a Modbus exception frame
|
||||
* sent by the protocol stack.
|
||||
*
|
||||
* \param ucFunctionCode The Modbus function code for which this handler should
|
||||
* be registers. Valid function codes are in the range 1 to 127.
|
||||
* \param pxHandler The function handler which should be called in case
|
||||
* such a frame is received. If \c NULL a previously registered function handler
|
||||
* for this function code is removed.
|
||||
*
|
||||
* \return eMBErrorCode::MB_ENOERR if the handler has been installed. If no
|
||||
* more resources are available it returns eMBErrorCode::MB_ENORES. In this
|
||||
* case the values in mbconfig.h should be adjusted. If the argument was not
|
||||
* valid it returns eMBErrorCode::MB_EINVAL.
|
||||
*/
|
||||
eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
|
||||
pxMBFunctionHandler pxHandler );
|
||||
|
||||
/* ----------------------- Callback -----------------------------------------*/
|
||||
|
||||
/*! \defgroup modbus_registers Modbus Registers
|
||||
* \code #include "mb.h" \endcode
|
||||
* The protocol stack does not internally allocate any memory for the
|
||||
* registers. This makes the protocol stack very small and also usable on
|
||||
* low end targets. In addition the values don't have to be in the memory
|
||||
* and could for example be stored in a flash.<br>
|
||||
* Whenever the protocol stack requires a value it calls one of the callback
|
||||
* function with the register address and the number of registers to read
|
||||
* as an argument. The application should then read the actual register values
|
||||
* (for example the ADC voltage) and should store the result in the supplied
|
||||
* buffer.<br>
|
||||
* If the protocol stack wants to update a register value because a write
|
||||
* register function was received a buffer with the new register values is
|
||||
* passed to the callback function. The function should then use these values
|
||||
* to update the application register values.
|
||||
*/
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if the value of a <em>Input Register</em>
|
||||
* is required by the protocol stack. The starting register address is given
|
||||
* by \c usAddress and the last register is given by <tt>usAddress +
|
||||
* usNRegs - 1</tt>.
|
||||
*
|
||||
* \param pucRegBuffer A buffer where the callback function should write
|
||||
* the current value of the modbus registers to.
|
||||
* \param usAddress The starting address of the register. Input registers
|
||||
* are in the range 1 - 65535.
|
||||
* \param usNRegs Number of registers the callback function must supply.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application can not supply values
|
||||
* for registers within this range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
|
||||
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
|
||||
* currently not available and the application dependent response
|
||||
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
|
||||
* exception is sent as a response.
|
||||
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
|
||||
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Holding Register</em> value is
|
||||
* read or written by the protocol stack. The starting register address
|
||||
* is given by \c usAddress and the last register is given by
|
||||
* <tt>usAddress + usNRegs - 1</tt>.
|
||||
*
|
||||
* \param pucRegBuffer If the application registers values should be updated the
|
||||
* buffer points to the new registers values. If the protocol stack needs
|
||||
* to now the current values the callback function should write them into
|
||||
* this buffer.
|
||||
* \param usAddress The starting address of the register.
|
||||
* \param usNRegs Number of registers to read or write.
|
||||
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
|
||||
* values should be updated from the values in the buffer. For example
|
||||
* this would be the case when the Modbus master has issued an
|
||||
* <b>WRITE SINGLE REGISTER</b> command.
|
||||
* If the value eMBRegisterMode::MB_REG_READ the application should copy
|
||||
* the current values into the buffer \c pucRegBuffer.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application can not supply values
|
||||
* for registers within this range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
|
||||
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
|
||||
* currently not available and the application dependent response
|
||||
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
|
||||
* exception is sent as a response.
|
||||
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
|
||||
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs, eMBRegisterMode eMode );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Coil Register</em> value is
|
||||
* read or written by the protocol stack. If you are going to use
|
||||
* this function you might use the functions xMBUtilSetBits( ) and
|
||||
* xMBUtilGetBits( ) for working with bitfields.
|
||||
*
|
||||
* \param pucRegBuffer The bits are packed in bytes where the first coil
|
||||
* starting at address \c usAddress is stored in the LSB of the
|
||||
* first byte in the buffer <code>pucRegBuffer</code>.
|
||||
* If the buffer should be written by the callback function unused
|
||||
* coil values (I.e. if not a multiple of eight coils is used) should be set
|
||||
* to zero.
|
||||
* \param usAddress The first coil number.
|
||||
* \param usNCoils Number of coil values requested.
|
||||
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application values should
|
||||
* be updated from the values supplied in the buffer \c pucRegBuffer.
|
||||
* If eMBRegisterMode::MB_REG_READ the application should store the current
|
||||
* values in the buffer \c pucRegBuffer.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
|
||||
* within the requested address range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
|
||||
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
|
||||
* currently not available and the application dependent response
|
||||
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
|
||||
* exception is sent as a response.
|
||||
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
|
||||
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNCoils, eMBRegisterMode eMode );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Input Discrete Register</em> value is
|
||||
* read by the protocol stack.
|
||||
*
|
||||
* If you are going to use his function you might use the functions
|
||||
* xMBUtilSetBits( ) and xMBUtilGetBits( ) for working with bitfields.
|
||||
*
|
||||
* \param pucRegBuffer The buffer should be updated with the current
|
||||
* coil values. The first discrete input starting at \c usAddress must be
|
||||
* stored at the LSB of the first byte in the buffer. If the requested number
|
||||
* is not a multiple of eight the remaining bits should be set to zero.
|
||||
* \param usAddress The starting address of the first discrete input.
|
||||
* \param usNDiscrete Number of discrete input values.
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If no such discrete inputs exists.
|
||||
* In this case a <b>ILLEGAL DATA ADDRESS</b> exception frame is sent
|
||||
* as a response.
|
||||
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
|
||||
* currently not available and the application dependent response
|
||||
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
|
||||
* exception is sent as a response.
|
||||
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
|
||||
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNDiscrete );
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,402 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mb_m.h,v 1.60 2013/09/03 10:20:05 Armink Add Master Functions $
|
||||
*/
|
||||
|
||||
#ifndef _MB_M_H
|
||||
#define _MB_M_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
/*! \defgroup modbus Modbus
|
||||
* \code #include "mb_m.h" \endcode
|
||||
*
|
||||
* This module defines the interface for the application. It contains
|
||||
* the basic functions and types required to use the Modbus Master protocol stack.
|
||||
* A typical application will want to call eMBMasterInit() first. If the device
|
||||
* is ready to answer network requests it must then call eMBEnable() to activate
|
||||
* the protocol stack. In the main loop the function eMBMasterPoll() must be called
|
||||
* periodically. The time interval between pooling depends on the configured
|
||||
* Modbus timeout. If an RTOS is available a separate task should be created
|
||||
* and the task should always call the function eMBMasterPoll().
|
||||
*
|
||||
* \code
|
||||
* // Initialize protocol stack in RTU mode for a Master
|
||||
* eMBMasterInit( MB_RTU, 38400, MB_PAR_EVEN );
|
||||
* // Enable the Modbus Protocol Stack.
|
||||
* eMBMasterEnable( );
|
||||
* for( ;; )
|
||||
* {
|
||||
* // Call the main polling loop of the Modbus Master protocol stack.
|
||||
* eMBMasterPoll( );
|
||||
* ...
|
||||
* }
|
||||
* \endcode
|
||||
*/
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Use the default Modbus Master TCP port (502)
|
||||
*/
|
||||
#define MB_MASTER_TCP_PORT_USE_DEFAULT 0
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
/*! \ingroup modbus
|
||||
* \brief Errorcodes used by all function in the Master request.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_MRE_NO_ERR, /*!< no error. */
|
||||
MB_MRE_NO_REG, /*!< illegal register address. */
|
||||
MB_MRE_ILL_ARG, /*!< illegal argument. */
|
||||
MB_MRE_REV_DATA, /*!< receive data error. */
|
||||
MB_MRE_TIMEDOUT, /*!< timeout error occurred. */
|
||||
MB_MRE_MASTER_BUSY, /*!< master is busy now. */
|
||||
MB_MRE_EXE_FUN /*!< execute function error. */
|
||||
} eMBMasterReqErrCode;
|
||||
/*! \ingroup modbus
|
||||
* \brief TimerMode is Master 3 kind of Timer modes.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_TMODE_T35, /*!< Master receive frame T3.5 timeout. */
|
||||
MB_TMODE_RESPOND_TIMEOUT, /*!< Master wait respond for slave. */
|
||||
MB_TMODE_CONVERT_DELAY /*!< Master sent broadcast ,then delay sometime.*/
|
||||
}eMBMasterTimerMode;
|
||||
|
||||
/* ----------------------- Function prototypes ------------------------------*/
|
||||
/*! \ingroup modbus
|
||||
* \brief Initialize the Modbus Master protocol stack.
|
||||
*
|
||||
* This functions initializes the ASCII or RTU module and calls the
|
||||
* init functions of the porting layer to prepare the hardware. Please
|
||||
* note that the receiver is still disabled and no Modbus frames are
|
||||
* processed until eMBMasterEnable( ) has been called.
|
||||
*
|
||||
* \param eMode If ASCII or RTU mode should be used.
|
||||
* \param ucPort The port to use. E.g. 1 for COM1 on windows. This value
|
||||
* is platform dependent and some ports simply choose to ignore it.
|
||||
* \param ulBaudRate The baudrate. E.g. 19200. Supported baudrates depend
|
||||
* on the porting layer.
|
||||
* \param eParity Parity used for serial transmission.
|
||||
*
|
||||
* \return If no error occurs the function returns eMBErrorCode::MB_ENOERR.
|
||||
* The protocol is then in the disabled state and ready for activation
|
||||
* by calling eMBMasterEnable( ). Otherwise one of the following error codes
|
||||
* is returned:
|
||||
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
|
||||
*/
|
||||
eMBErrorCode eMBMasterInit( eMBMode eMode, UCHAR ucPort,
|
||||
ULONG ulBaudRate, eMBParity eParity );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Initialize the Modbus Master protocol stack for Modbus TCP.
|
||||
*
|
||||
* This function initializes the Modbus TCP Module. Please note that
|
||||
* frame processing is still disabled until eMBEnable( ) is called.
|
||||
*
|
||||
* \param usTCPPort The TCP port to listen on.
|
||||
* \return If the protocol stack has been initialized correctly the function
|
||||
* returns eMBErrorCode::MB_ENOERR. Otherwise one of the following error
|
||||
* codes is returned:
|
||||
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
|
||||
* slave addresses are in the range 1 - 247.
|
||||
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
|
||||
*/
|
||||
eMBErrorCode eMBMasterTCPInit( USHORT usTCPPort );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Release resources used by the protocol stack.
|
||||
*
|
||||
* This function disables the Modbus Master protocol stack and release all
|
||||
* hardware resources. It must only be called when the protocol stack
|
||||
* is disabled.
|
||||
*
|
||||
* \note Note all ports implement this function. A port which wants to
|
||||
* get an callback must define the macro MB_PORT_HAS_CLOSE to 1.
|
||||
*
|
||||
* \return If the resources where released it return eMBErrorCode::MB_ENOERR.
|
||||
* If the protocol stack is not in the disabled state it returns
|
||||
* eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBMasterClose( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Enable the Modbus Master protocol stack.
|
||||
*
|
||||
* This function enables processing of Modbus Master frames. Enabling the protocol
|
||||
* stack is only possible if it is in the disabled state.
|
||||
*
|
||||
* \return If the protocol stack is now in the state enabled it returns
|
||||
* eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
|
||||
* return eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBMasterEnable( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Disable the Modbus Master protocol stack.
|
||||
*
|
||||
* This function disables processing of Modbus frames.
|
||||
*
|
||||
* \return If the protocol stack has been disabled it returns
|
||||
* eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns
|
||||
* eMBErrorCode::MB_EILLSTATE.
|
||||
*/
|
||||
eMBErrorCode eMBMasterDisable( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief The main pooling loop of the Modbus Master protocol stack.
|
||||
*
|
||||
* This function must be called periodically. The timer interval required
|
||||
* is given by the application dependent Modbus slave timeout. Internally the
|
||||
* function calls xMBMasterPortEventGet() and waits for an event from the receiver or
|
||||
* transmitter state machines.
|
||||
*
|
||||
* \return If the protocol stack is not in the enabled state the function
|
||||
* returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
|
||||
* eMBErrorCode::MB_ENOERR.
|
||||
*/
|
||||
eMBErrorCode eMBMasterPoll( void );
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Registers a callback handler for a given function code.
|
||||
*
|
||||
* This function registers a new callback handler for a given function code.
|
||||
* The callback handler supplied is responsible for interpreting the Modbus PDU and
|
||||
* the creation of an appropriate response. In case of an error it should return
|
||||
* one of the possible Modbus exceptions which results in a Modbus exception frame
|
||||
* sent by the protocol stack.
|
||||
*
|
||||
* \param ucFunctionCode The Modbus function code for which this handler should
|
||||
* be registers. Valid function codes are in the range 1 to 127.
|
||||
* \param pxHandler The function handler which should be called in case
|
||||
* such a frame is received. If \c NULL a previously registered function handler
|
||||
* for this function code is removed.
|
||||
*
|
||||
* \return eMBErrorCode::MB_ENOERR if the handler has been installed. If no
|
||||
* more resources are available it returns eMBErrorCode::MB_ENORES. In this
|
||||
* case the values in mbconfig.h should be adjusted. If the argument was not
|
||||
* valid it returns eMBErrorCode::MB_EINVAL.
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegisterCB( UCHAR ucFunctionCode,
|
||||
pxMBFunctionHandler pxHandler );
|
||||
|
||||
/* ----------------------- Callback -----------------------------------------*/
|
||||
|
||||
/*! \defgroup modbus_master registers Modbus Registers
|
||||
* \code #include "mb_m.h" \endcode
|
||||
* The protocol stack does not internally allocate any memory for the
|
||||
* registers. This makes the protocol stack very small and also usable on
|
||||
* low end targets. In addition the values don't have to be in the memory
|
||||
* and could for example be stored in a flash.<br>
|
||||
* Whenever the protocol stack requires a value it calls one of the callback
|
||||
* function with the register address and the number of registers to read
|
||||
* as an argument. The application should then read the actual register values
|
||||
* (for example the ADC voltage) and should store the result in the supplied
|
||||
* buffer.<br>
|
||||
* If the protocol stack wants to update a register value because a write
|
||||
* register function was received a buffer with the new register values is
|
||||
* passed to the callback function. The function should then use these values
|
||||
* to update the application register values.
|
||||
*/
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if the value of a <em>Input Register</em>
|
||||
* is required by the protocol stack. The starting register address is given
|
||||
* by \c usAddress and the last register is given by <tt>usAddress +
|
||||
* usNRegs - 1</tt>.
|
||||
*
|
||||
* \param pucRegBuffer A buffer where the callback function should write
|
||||
* the current value of the modbus registers to.
|
||||
* \param usAddress The starting address of the register. Input registers
|
||||
* are in the range 1 - 65535.
|
||||
* \param usNRegs Number of registers the callback function must supply.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
|
||||
* within the requested address range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Holding Register</em> value is
|
||||
* read or written by the protocol stack. The starting register address
|
||||
* is given by \c usAddress and the last register is given by
|
||||
* <tt>usAddress + usNRegs - 1</tt>.
|
||||
*
|
||||
* \param pucRegBuffer If the application registers values should be updated the
|
||||
* buffer points to the new registers values. If the protocol stack needs
|
||||
* to now the current values the callback function should write them into
|
||||
* this buffer.
|
||||
* \param usAddress The starting address of the register.
|
||||
* \param usNRegs Number of registers to read or write.
|
||||
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
|
||||
* values should be updated from the values in the buffer. For example
|
||||
* this would be the case when the Modbus master has issued an
|
||||
* <b>WRITE SINGLE REGISTER</b> command.
|
||||
* If the value eMBRegisterMode::MB_REG_READ the application should copy
|
||||
* the current values into the buffer \c pucRegBuffer.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
|
||||
* within the requested address range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs, eMBRegisterMode eMode );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Coil Register</em> value is
|
||||
* read or written by the protocol stack. If you are going to use
|
||||
* this function you might use the functions xMBUtilSetBits( ) and
|
||||
* xMBUtilGetBits( ) for working with bitfields.
|
||||
*
|
||||
* \param pucRegBuffer The bits are packed in bytes where the first coil
|
||||
* starting at address \c usAddress is stored in the LSB of the
|
||||
* first byte in the buffer <code>pucRegBuffer</code>.
|
||||
* If the buffer should be written by the callback function unused
|
||||
* coil values (I.e. if not a multiple of eight coils is used) should be set
|
||||
* to zero.
|
||||
* \param usAddress The first coil number.
|
||||
* \param usNCoils Number of coil values requested.
|
||||
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application values should
|
||||
* be updated from the values supplied in the buffer \c pucRegBuffer.
|
||||
* If eMBRegisterMode::MB_REG_READ the application should store the current
|
||||
* values in the buffer \c pucRegBuffer.
|
||||
*
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
|
||||
* within the requested address range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNCoils, eMBRegisterMode eMode );
|
||||
|
||||
/*! \ingroup modbus_registers
|
||||
* \brief Callback function used if a <em>Input Discrete Register</em> value is
|
||||
* read by the protocol stack.
|
||||
*
|
||||
* If you are going to use his function you might use the functions
|
||||
* xMBUtilSetBits( ) and xMBUtilGetBits( ) for working with bitfields.
|
||||
*
|
||||
* \param pucRegBuffer The buffer should be updated with the current
|
||||
* coil values. The first discrete input starting at \c usAddress must be
|
||||
* stored at the LSB of the first byte in the buffer. If the requested number
|
||||
* is not a multiple of eight the remaining bits should be set to zero.
|
||||
* \param usAddress The starting address of the first discrete input.
|
||||
* \param usNDiscrete Number of discrete input values.
|
||||
* \return The function must return one of the following error codes:
|
||||
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
|
||||
* Modbus response is sent.
|
||||
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
|
||||
* within the requested address range. In this case a
|
||||
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNDiscrete );
|
||||
|
||||
/*! \ingroup modbus
|
||||
*\brief These Modbus functions are called for user when Modbus run in Master Mode.
|
||||
*/
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadInputRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usNRegs, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usRegData, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteMultipleHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr,
|
||||
USHORT usNRegs, USHORT * pusDataBuffer, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usNRegs, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadWriteMultipleHoldingRegister( UCHAR ucSndAddr,
|
||||
USHORT usReadRegAddr, USHORT usNReadRegs, USHORT * pusDataBuffer,
|
||||
USHORT usWriteRegAddr, USHORT usNWriteRegs, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadCoils( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usNCoils, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteCoil( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usCoilData, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqWriteMultipleCoils( UCHAR ucSndAddr,
|
||||
USHORT usCoilAddr, USHORT usNCoils, UCHAR * pucDataBuffer, LONG lTimeOut );
|
||||
eMBMasterReqErrCode
|
||||
eMBMasterReqReadDiscreteInputs( UCHAR ucSndAddr, USHORT usDiscreteAddr, USHORT usNDiscreteIn, LONG lTimeOut );
|
||||
|
||||
eMBException
|
||||
eMBMasterFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncReadCoils( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen );
|
||||
eMBException
|
||||
eMBMasterFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
|
||||
/*£¡ \ingroup modbus
|
||||
*\brief These functions are interface for Modbus Master
|
||||
*/
|
||||
void vMBMasterGetPDUSndBuf( UCHAR ** pucFrame );
|
||||
UCHAR ucMBMasterGetDestAddress( void );
|
||||
void vMBMasterSetDestAddress( UCHAR Address );
|
||||
BOOL xMBMasterGetCBRunInMasterMode( void );
|
||||
void vMBMasterSetCBRunInMasterMode( BOOL IsMasterMode );
|
||||
USHORT usMBMasterGetPDUSndLength( void );
|
||||
void vMBMasterSetPDUSndLength( USHORT SendPDULength );
|
||||
void vMBMasterSetCurTimerMode( eMBMasterTimerMode eMBTimerMode );
|
||||
BOOL xMBMasterRequestIsBroadcast( void );
|
||||
eMBMasterErrorEventType eMBMasterGetErrorType( void );
|
||||
void vMBMasterSetErrorType( eMBMasterErrorEventType errorType );
|
||||
eMBMasterReqErrCode eMBMasterWaitRequestFinish( void );
|
||||
|
||||
/* ----------------------- Callback -----------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,124 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbconfig.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
|
||||
* $Id: mbconfig.h,v 1.60 2013/08/13 21:19:55 Armink Add Master Functions $
|
||||
*/
|
||||
|
||||
#ifndef _MB_CONFIG_H
|
||||
#define _MB_CONFIG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
/*! \defgroup modbus_cfg Modbus Configuration
|
||||
*
|
||||
* Most modules in the protocol stack are completly optional and can be
|
||||
* excluded. This is specially important if target resources are very small
|
||||
* and program memory space should be saved.<br>
|
||||
*
|
||||
* All of these settings are available in the file <code>mbconfig.h</code>
|
||||
*/
|
||||
/*! \addtogroup modbus_cfg
|
||||
* @{
|
||||
*/
|
||||
/*! \brief If Modbus Master ASCII support is enabled. */
|
||||
#define MB_MASTER_ASCII_ENABLED ( 0 )
|
||||
/*! \brief If Modbus Master RTU support is enabled. */
|
||||
#define MB_MASTER_RTU_ENABLED ( 1 )
|
||||
/*! \brief If Modbus Master TCP support is enabled. */
|
||||
#define MB_MASTER_TCP_ENABLED ( 0 )
|
||||
/*! \brief If Modbus Slave ASCII support is enabled. */
|
||||
#define MB_SLAVE_ASCII_ENABLED ( 0 )
|
||||
/*! \brief If Modbus Slave RTU support is enabled. */
|
||||
#define MB_SLAVE_RTU_ENABLED ( 1 )
|
||||
/*! \brief If Modbus Slave TCP support is enabled. */
|
||||
#define MB_SLAVE_TCP_ENABLED ( 0 )
|
||||
/*! \brief The character timeout value for Modbus ASCII.
|
||||
*
|
||||
* The character timeout value is not fixed for Modbus ASCII and is therefore
|
||||
* a configuration option. It should be set to the maximum expected delay
|
||||
* time of the network.
|
||||
*/
|
||||
#define MB_ASCII_TIMEOUT_SEC ( 1 )
|
||||
/*! \brief Maximum number of Modbus functions codes the protocol stack
|
||||
* should support.
|
||||
*
|
||||
* The maximum number of supported Modbus functions must be greater than
|
||||
* the sum of all enabled functions in this file and custom function
|
||||
* handlers. If set to small adding more functions will fail.
|
||||
*/
|
||||
#define MB_FUNC_HANDLERS_MAX ( 16 )
|
||||
/*! \brief Number of bytes which should be allocated for the <em>Report Slave ID
|
||||
* </em>command.
|
||||
*
|
||||
* This number limits the maximum size of the additional segment in the
|
||||
* report slave id function. See eMBSetSlaveID( ) for more information on
|
||||
* how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED
|
||||
* is set to <code>1</code>.
|
||||
*/
|
||||
#define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 )
|
||||
/*! \brief If the <em>Report Slave ID</em> function should be enabled. */
|
||||
#define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Read Input Registers</em> function should be enabled. */
|
||||
#define MB_FUNC_READ_INPUT_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Read Holding Registers</em> function should be enabled. */
|
||||
#define MB_FUNC_READ_HOLDING_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Write Single Register</em> function should be enabled. */
|
||||
#define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Write Multiple registers</em> function should be enabled. */
|
||||
#define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Read Coils</em> function should be enabled. */
|
||||
#define MB_FUNC_READ_COILS_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Write Coils</em> function should be enabled. */
|
||||
#define MB_FUNC_WRITE_COIL_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Write Multiple Coils</em> function should be enabled. */
|
||||
#define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Read Discrete Inputs</em> function should be enabled. */
|
||||
#define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 )
|
||||
/*! \brief If the <em>Read/Write Multiple Registers</em> function should be enabled. */
|
||||
#define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 )
|
||||
/*! @} */
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
/*! \brief If master send a broadcast frame,the master will wait time of convert to delay,
|
||||
* then master can send other frame */
|
||||
#define MB_MASTER_DELAY_MS_CONVERT (200 )
|
||||
/*! \brief If master send a frame which is not broadcast,the master will wait sometime for slave.
|
||||
* And if slave is not respond in this time,the master will process this timeout error.
|
||||
* Then master can send other frame */
|
||||
#define MB_MASTER_TIMEOUT_MS_RESPOND (100 )
|
||||
/*! \brief The total slaves in Modbus Master system. Default 16.
|
||||
* \note : The slave ID must be continuous from 1.*/
|
||||
#define MB_MASTER_TOTAL_SLAVE_NUM ( 16 )
|
||||
#endif
|
||||
|
||||
#endif
|
|
@ -1,87 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_FRAME_H
|
||||
#define _MB_FRAME_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* Constants which defines the format of a modbus frame. The example is
|
||||
* shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not
|
||||
* dependent on the underlying transport.
|
||||
*
|
||||
* <code>
|
||||
* <------------------------ MODBUS SERIAL LINE PDU (1) ------------------->
|
||||
* <----------- MODBUS PDU (1') ---------------->
|
||||
* +-----------+---------------+----------------------------+-------------+
|
||||
* | Address | Function Code | Data | CRC/LRC |
|
||||
* +-----------+---------------+----------------------------+-------------+
|
||||
* | | | |
|
||||
* (2) (3/2') (3') (4)
|
||||
*
|
||||
* (1) ... MB_SER_PDU_SIZE_MAX = 256
|
||||
* (2) ... MB_SER_PDU_ADDR_OFF = 0
|
||||
* (3) ... MB_SER_PDU_PDU_OFF = 1
|
||||
* (4) ... MB_SER_PDU_SIZE_CRC = 2
|
||||
*
|
||||
* (1') ... MB_PDU_SIZE_MAX = 253
|
||||
* (2') ... MB_PDU_FUNC_OFF = 0
|
||||
* (3') ... MB_PDU_DATA_OFF = 1
|
||||
* </code>
|
||||
*/
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_PDU_SIZE_MAX 253 /*!< Maximum size of a PDU. */
|
||||
#define MB_PDU_SIZE_MIN 1 /*!< Function Code */
|
||||
#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */
|
||||
#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */
|
||||
|
||||
/* ----------------------- Prototypes 0-------------------------------------*/
|
||||
typedef void ( *pvMBFrameStart ) ( void );
|
||||
|
||||
typedef void ( *pvMBFrameStop ) ( void );
|
||||
|
||||
typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress,
|
||||
UCHAR ** pucFrame,
|
||||
USHORT * pusLength );
|
||||
|
||||
typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress,
|
||||
const UCHAR * pucFrame,
|
||||
USHORT usLength );
|
||||
|
||||
typedef void( *pvMBFrameClose ) ( void );
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,80 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbfunc.h,v 1.12 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_FUNC_H
|
||||
#define _MB_FUNC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
#if MB_FUNC_OTHER_REP_SLAVEID_BUF > 0
|
||||
eMBException eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_INPUT_ENABLED > 0
|
||||
eMBException eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
||||
eMBException eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
|
||||
eMBException eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
||||
eMBException eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
eMBException eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_COIL_ENABLED > 0
|
||||
eMBException eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
|
||||
eMBException eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
|
||||
eMBException eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
||||
eMBException eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,205 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbport.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
|
||||
* mbport.h,v 1.60 2013/08/17 11:42:56 Armink Add Master Functions $
|
||||
*/
|
||||
|
||||
#ifndef _MB_PORT_H
|
||||
#define _MB_PORT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
|
||||
typedef enum
|
||||
{
|
||||
EV_READY = 1<<0, /*!< Startup finished. */
|
||||
EV_FRAME_RECEIVED = 1<<1, /*!< Frame received. */
|
||||
EV_EXECUTE = 1<<2, /*!< Execute function. */
|
||||
EV_FRAME_SENT = 1<<3 /*!< Frame sent. */
|
||||
} eMBEventType;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
EV_MASTER_READY = 1<<0, /*!< Startup finished. */
|
||||
EV_MASTER_FRAME_RECEIVED = 1<<1, /*!< Frame received. */
|
||||
EV_MASTER_EXECUTE = 1<<2, /*!< Execute function. */
|
||||
EV_MASTER_FRAME_SENT = 1<<3, /*!< Frame sent. */
|
||||
EV_MASTER_ERROR_PROCESS = 1<<4, /*!< Frame error process. */
|
||||
EV_MASTER_PROCESS_SUCESS = 1<<5, /*!< Request process success. */
|
||||
EV_MASTER_ERROR_RESPOND_TIMEOUT = 1<<6, /*!< Request respond timeout. */
|
||||
EV_MASTER_ERROR_RECEIVE_DATA = 1<<7, /*!< Request receive data error. */
|
||||
EV_MASTER_ERROR_EXECUTE_FUNCTION = 1<<8, /*!< Request execute function error. */
|
||||
} eMBMasterEventType;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
EV_ERROR_RESPOND_TIMEOUT, /*!< Slave respond timeout. */
|
||||
EV_ERROR_RECEIVE_DATA, /*!< Receive frame data erroe. */
|
||||
EV_ERROR_EXECUTE_FUNCTION, /*!< Execute function error. */
|
||||
} eMBMasterErrorEventType;
|
||||
|
||||
/*! \ingroup modbus
|
||||
* \brief Parity used for characters in serial mode.
|
||||
*
|
||||
* The parity which should be applied to the characters sent over the serial
|
||||
* link. Please note that this values are actually passed to the porting
|
||||
* layer and therefore not all parity modes might be available.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MB_PAR_NONE, /*!< No parity. */
|
||||
MB_PAR_ODD, /*!< Odd parity. */
|
||||
MB_PAR_EVEN /*!< Even parity. */
|
||||
} eMBParity;
|
||||
|
||||
/* ----------------------- Supporting functions -----------------------------*/
|
||||
BOOL xMBPortEventInit( void );
|
||||
|
||||
BOOL xMBPortEventPost( eMBEventType eEvent );
|
||||
|
||||
BOOL xMBPortEventGet( /*@out@ */ eMBEventType * eEvent );
|
||||
|
||||
BOOL xMBMasterPortEventInit( void );
|
||||
|
||||
BOOL xMBMasterPortEventPost( eMBMasterEventType eEvent );
|
||||
|
||||
BOOL xMBMasterPortEventGet( /*@out@ */ eMBMasterEventType * eEvent );
|
||||
|
||||
void vMBMasterOsResInit( void );
|
||||
|
||||
BOOL xMBMasterRunResTake( int32_t time );
|
||||
|
||||
void vMBMasterRunResRelease( void );
|
||||
|
||||
/* ----------------------- Serial port functions ----------------------------*/
|
||||
|
||||
BOOL xMBPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
|
||||
UCHAR ucDataBits, eMBParity eParity );
|
||||
|
||||
void vMBPortClose( void );
|
||||
|
||||
void xMBPortSerialClose( void );
|
||||
|
||||
void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
|
||||
|
||||
INLINE BOOL xMBPortSerialGetByte( CHAR * pucByte );
|
||||
|
||||
INLINE BOOL xMBPortSerialPutByte( CHAR ucByte );
|
||||
|
||||
BOOL xMBMasterPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
|
||||
UCHAR ucDataBits, eMBParity eParity );
|
||||
|
||||
void vMBMasterPortClose( void );
|
||||
|
||||
void xMBMasterPortSerialClose( void );
|
||||
|
||||
void vMBMasterPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
|
||||
|
||||
INLINE BOOL xMBMasterPortSerialGetByte( CHAR * pucByte );
|
||||
|
||||
INLINE BOOL xMBMasterPortSerialPutByte( CHAR ucByte );
|
||||
|
||||
/* ----------------------- Timers functions ---------------------------------*/
|
||||
BOOL xMBPortTimersInit( USHORT usTimeOut50us );
|
||||
|
||||
void xMBPortTimersClose( void );
|
||||
|
||||
INLINE void vMBPortTimersEnable( void );
|
||||
|
||||
INLINE void vMBPortTimersDisable( void );
|
||||
|
||||
BOOL xMBMasterPortTimersInit( USHORT usTimeOut50us );
|
||||
|
||||
void xMBMasterPortTimersClose( void );
|
||||
|
||||
INLINE void vMBMasterPortTimersT35Enable( void );
|
||||
|
||||
INLINE void vMBMasterPortTimersConvertDelayEnable( void );
|
||||
|
||||
INLINE void vMBMasterPortTimersRespondTimeoutEnable( void );
|
||||
|
||||
INLINE void vMBMasterPortTimersDisable( void );
|
||||
|
||||
/* ----------------- Callback for the master error process ------------------*/
|
||||
void vMBMasterErrorCBRespondTimeout( UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength );
|
||||
|
||||
void vMBMasterErrorCBReceiveData( UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength );
|
||||
|
||||
void vMBMasterErrorCBExecuteFunction( UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength );
|
||||
|
||||
void vMBMasterCBRequestScuuess( void );
|
||||
|
||||
/* ----------------------- Callback for the protocol stack ------------------*/
|
||||
|
||||
/*!
|
||||
* \brief Callback function for the porting layer when a new byte is
|
||||
* available.
|
||||
*
|
||||
* Depending upon the mode this callback function is used by the RTU or
|
||||
* ASCII transmission layers. In any case a call to xMBPortSerialGetByte()
|
||||
* must immediately return a new character.
|
||||
*
|
||||
* \return <code>TRUE</code> if a event was posted to the queue because
|
||||
* a new byte was received. The port implementation should wake up the
|
||||
* tasks which are currently blocked on the eventqueue.
|
||||
*/
|
||||
extern BOOL( *pxMBFrameCBByteReceived ) ( void );
|
||||
|
||||
extern BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
|
||||
|
||||
extern BOOL( *pxMBPortCBTimerExpired ) ( void );
|
||||
|
||||
extern BOOL( *pxMBMasterFrameCBByteReceived ) ( void );
|
||||
|
||||
extern BOOL( *pxMBMasterFrameCBTransmitterEmpty ) ( void );
|
||||
|
||||
extern BOOL( *pxMBMasterPortCBTimerExpired ) ( void );
|
||||
|
||||
/* ----------------------- TCP port functions -------------------------------*/
|
||||
BOOL xMBTCPPortInit( USHORT usTCPPort );
|
||||
|
||||
void vMBTCPPortClose( void );
|
||||
|
||||
void vMBTCPPortDisable( void );
|
||||
|
||||
BOOL xMBTCPPortGetRequest( UCHAR **ppucMBTCPFrame, USHORT * usTCPLength );
|
||||
|
||||
BOOL xMBTCPPortSendResponse( const UCHAR *pucMBTCPFrame, USHORT usTCPLength );
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,83 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbproto.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_PROTO_H
|
||||
#define _MB_PROTO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_ADDRESS_BROADCAST ( 0 ) /*! Modbus broadcast address. */
|
||||
#define MB_ADDRESS_MIN ( 1 ) /*! Smallest possible slave address. */
|
||||
#define MB_ADDRESS_MAX ( 247 ) /*! Biggest possible slave address. */
|
||||
#define MB_FUNC_NONE ( 0 )
|
||||
#define MB_FUNC_READ_COILS ( 1 )
|
||||
#define MB_FUNC_READ_DISCRETE_INPUTS ( 2 )
|
||||
#define MB_FUNC_WRITE_SINGLE_COIL ( 5 )
|
||||
#define MB_FUNC_WRITE_MULTIPLE_COILS ( 15 )
|
||||
#define MB_FUNC_READ_HOLDING_REGISTER ( 3 )
|
||||
#define MB_FUNC_READ_INPUT_REGISTER ( 4 )
|
||||
#define MB_FUNC_WRITE_REGISTER ( 6 )
|
||||
#define MB_FUNC_WRITE_MULTIPLE_REGISTERS ( 16 )
|
||||
#define MB_FUNC_READWRITE_MULTIPLE_REGISTERS ( 23 )
|
||||
#define MB_FUNC_DIAG_READ_EXCEPTION ( 7 )
|
||||
#define MB_FUNC_DIAG_DIAGNOSTIC ( 8 )
|
||||
#define MB_FUNC_DIAG_GET_COM_EVENT_CNT ( 11 )
|
||||
#define MB_FUNC_DIAG_GET_COM_EVENT_LOG ( 12 )
|
||||
#define MB_FUNC_OTHER_REPORT_SLAVEID ( 17 )
|
||||
#define MB_FUNC_ERROR ( 128 )
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
typedef enum
|
||||
{
|
||||
MB_EX_NONE = 0x00,
|
||||
MB_EX_ILLEGAL_FUNCTION = 0x01,
|
||||
MB_EX_ILLEGAL_DATA_ADDRESS = 0x02,
|
||||
MB_EX_ILLEGAL_DATA_VALUE = 0x03,
|
||||
MB_EX_SLAVE_DEVICE_FAILURE = 0x04,
|
||||
MB_EX_ACKNOWLEDGE = 0x05,
|
||||
MB_EX_SLAVE_BUSY = 0x06,
|
||||
MB_EX_MEMORY_PARITY_ERROR = 0x08,
|
||||
MB_EX_GATEWAY_PATH_FAILED = 0x0A,
|
||||
MB_EX_GATEWAY_TGT_FAILED = 0x0B
|
||||
} eMBException;
|
||||
|
||||
typedef eMBException( *pxMBFunctionHandler ) ( UCHAR * pucFrame, USHORT * pusLength );
|
||||
|
||||
typedef struct
|
||||
{
|
||||
UCHAR ucFunctionCode;
|
||||
pxMBFunctionHandler pxHandler;
|
||||
} xMBFunctionHandler;
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,108 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbutils.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_UTILS_H
|
||||
#define _MB_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
/*! \defgroup modbus_utils Utilities
|
||||
*
|
||||
* This module contains some utility functions which can be used by
|
||||
* the application. It includes some special functions for working with
|
||||
* bitfields backed by a character array buffer.
|
||||
*
|
||||
*/
|
||||
/*! \addtogroup modbus_utils
|
||||
* @{
|
||||
*/
|
||||
/*! \brief Function to set bits in a byte buffer.
|
||||
*
|
||||
* This function allows the efficient use of an array to implement bitfields.
|
||||
* The array used for storing the bits must always be a multiple of two
|
||||
* bytes. Up to eight bits can be set or cleared in one operation.
|
||||
*
|
||||
* \param ucByteBuf A buffer where the bit values are stored. Must be a
|
||||
* multiple of 2 bytes. No length checking is performed and if
|
||||
* usBitOffset / 8 is greater than the size of the buffer memory contents
|
||||
* is overwritten.
|
||||
* \param usBitOffset The starting address of the bits to set. The first
|
||||
* bit has the offset 0.
|
||||
* \param ucNBits Number of bits to modify. The value must always be smaller
|
||||
* than 8.
|
||||
* \param ucValues Thew new values for the bits. The value for the first bit
|
||||
* starting at <code>usBitOffset</code> is the LSB of the value
|
||||
* <code>ucValues</code>
|
||||
*
|
||||
* \code
|
||||
* ucBits[2] = {0, 0};
|
||||
*
|
||||
* // Set bit 4 to 1 (read: set 1 bit starting at bit offset 4 to value 1)
|
||||
* xMBUtilSetBits( ucBits, 4, 1, 1 );
|
||||
*
|
||||
* // Set bit 7 to 1 and bit 8 to 0.
|
||||
* xMBUtilSetBits( ucBits, 7, 2, 0x01 );
|
||||
*
|
||||
* // Set bits 8 - 11 to 0x05 and bits 12 - 15 to 0x0A;
|
||||
* xMBUtilSetBits( ucBits, 8, 8, 0x5A);
|
||||
* \endcode
|
||||
*/
|
||||
void xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
|
||||
UCHAR ucNBits, UCHAR ucValues );
|
||||
|
||||
/*! \brief Function to read bits in a byte buffer.
|
||||
*
|
||||
* This function is used to extract up bit values from an array. Up to eight
|
||||
* bit values can be extracted in one step.
|
||||
*
|
||||
* \param ucByteBuf A buffer where the bit values are stored.
|
||||
* \param usBitOffset The starting address of the bits to set. The first
|
||||
* bit has the offset 0.
|
||||
* \param ucNBits Number of bits to modify. The value must always be smaller
|
||||
* than 8.
|
||||
*
|
||||
* \code
|
||||
* UCHAR ucBits[2] = {0, 0};
|
||||
* UCHAR ucResult;
|
||||
*
|
||||
* // Extract the bits 3 - 10.
|
||||
* ucResult = xMBUtilGetBits( ucBits, 3, 8 );
|
||||
* \endcode
|
||||
*/
|
||||
UCHAR xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
|
||||
UCHAR ucNBits );
|
||||
|
||||
/*! @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,412 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mb.c,v 1.27 2007/02/18 23:45:41 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
|
||||
#include "mb.h"
|
||||
#include "mbconfig.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbfunc.h"
|
||||
|
||||
#include "mbport.h"
|
||||
#if MB_SLAVE_RTU_ENABLED == 1
|
||||
#include "mbrtu.h"
|
||||
#endif
|
||||
#if MB_SLAVE_ASCII_ENABLED == 1
|
||||
#include "mbascii.h"
|
||||
#endif
|
||||
#if MB_SLAVE_TCP_ENABLED == 1
|
||||
#include "mbtcp.h"
|
||||
#endif
|
||||
|
||||
#ifndef MB_PORT_HAS_CLOSE
|
||||
#define MB_PORT_HAS_CLOSE 0
|
||||
#endif
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
|
||||
static UCHAR ucMBAddress;
|
||||
static eMBMode eMBCurrentMode;
|
||||
|
||||
static enum
|
||||
{
|
||||
STATE_ENABLED,
|
||||
STATE_DISABLED,
|
||||
STATE_NOT_INITIALIZED
|
||||
} eMBState = STATE_NOT_INITIALIZED;
|
||||
|
||||
/* Functions pointer which are initialized in eMBInit( ). Depending on the
|
||||
* mode (RTU or ASCII) the are set to the correct implementations.
|
||||
* Using for Modbus Slave
|
||||
*/
|
||||
static peMBFrameSend peMBFrameSendCur;
|
||||
static pvMBFrameStart pvMBFrameStartCur;
|
||||
static pvMBFrameStop pvMBFrameStopCur;
|
||||
static peMBFrameReceive peMBFrameReceiveCur;
|
||||
static pvMBFrameClose pvMBFrameCloseCur;
|
||||
|
||||
/* Callback functions required by the porting layer. They are called when
|
||||
* an external event has happend which includes a timeout or the reception
|
||||
* or transmission of a character.
|
||||
* Using for Modbus Slave
|
||||
*/
|
||||
BOOL( *pxMBFrameCBByteReceived ) ( void );
|
||||
BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
|
||||
BOOL( *pxMBPortCBTimerExpired ) ( void );
|
||||
|
||||
BOOL( *pxMBFrameCBReceiveFSMCur ) ( void );
|
||||
BOOL( *pxMBFrameCBTransmitFSMCur ) ( void );
|
||||
|
||||
/* An array of Modbus functions handlers which associates Modbus function
|
||||
* codes with implementing functions.
|
||||
*/
|
||||
static xMBFunctionHandler xFuncHandlers[MB_FUNC_HANDLERS_MAX] = {
|
||||
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
|
||||
{MB_FUNC_OTHER_REPORT_SLAVEID, eMBFuncReportSlaveID},
|
||||
#endif
|
||||
#if MB_FUNC_READ_INPUT_ENABLED > 0
|
||||
{MB_FUNC_READ_INPUT_REGISTER, eMBFuncReadInputRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_READ_HOLDING_REGISTER, eMBFuncReadHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_WRITE_MULTIPLE_REGISTERS, eMBFuncWriteMultipleHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_WRITE_REGISTER, eMBFuncWriteHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_READWRITE_MULTIPLE_REGISTERS, eMBFuncReadWriteMultipleHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
{MB_FUNC_READ_COILS, eMBFuncReadCoils},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_COIL_ENABLED > 0
|
||||
{MB_FUNC_WRITE_SINGLE_COIL, eMBFuncWriteCoil},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
|
||||
{MB_FUNC_WRITE_MULTIPLE_COILS, eMBFuncWriteMultipleCoils},
|
||||
#endif
|
||||
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
|
||||
{MB_FUNC_READ_DISCRETE_INPUTS, eMBFuncReadDiscreteInputs},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBInit( eMBMode eMode, UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
/* check preconditions */
|
||||
if( ( ucSlaveAddress == MB_ADDRESS_BROADCAST ) ||
|
||||
( ucSlaveAddress < MB_ADDRESS_MIN ) || ( ucSlaveAddress > MB_ADDRESS_MAX ) )
|
||||
{
|
||||
eStatus = MB_EINVAL;
|
||||
}
|
||||
else
|
||||
{
|
||||
ucMBAddress = ucSlaveAddress;
|
||||
|
||||
switch ( eMode )
|
||||
{
|
||||
#if MB_SLAVE_RTU_ENABLED > 0
|
||||
case MB_RTU:
|
||||
pvMBFrameStartCur = eMBRTUStart;
|
||||
pvMBFrameStopCur = eMBRTUStop;
|
||||
peMBFrameSendCur = eMBRTUSend;
|
||||
peMBFrameReceiveCur = eMBRTUReceive;
|
||||
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
|
||||
pxMBFrameCBByteReceived = xMBRTUReceiveFSM;
|
||||
pxMBFrameCBTransmitterEmpty = xMBRTUTransmitFSM;
|
||||
pxMBPortCBTimerExpired = xMBRTUTimerT35Expired;
|
||||
|
||||
eStatus = eMBRTUInit( ucMBAddress, ucPort, ulBaudRate, eParity );
|
||||
break;
|
||||
#endif
|
||||
#if MB_SLAVE_ASCII_ENABLED > 0
|
||||
case MB_ASCII:
|
||||
pvMBFrameStartCur = eMBASCIIStart;
|
||||
pvMBFrameStopCur = eMBASCIIStop;
|
||||
peMBFrameSendCur = eMBASCIISend;
|
||||
peMBFrameReceiveCur = eMBASCIIReceive;
|
||||
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
|
||||
pxMBFrameCBByteReceived = xMBASCIIReceiveFSM;
|
||||
pxMBFrameCBTransmitterEmpty = xMBASCIITransmitFSM;
|
||||
pxMBPortCBTimerExpired = xMBASCIITimerT1SExpired;
|
||||
|
||||
eStatus = eMBASCIIInit( ucMBAddress, ucPort, ulBaudRate, eParity );
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
eStatus = MB_EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
if( eStatus == MB_ENOERR )
|
||||
{
|
||||
if( !xMBPortEventInit( ) )
|
||||
{
|
||||
/* port dependent event module initalization failed. */
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
eMBCurrentMode = eMode;
|
||||
eMBState = STATE_DISABLED;
|
||||
}
|
||||
}
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#if MB_SLAVE_TCP_ENABLED > 0
|
||||
eMBErrorCode
|
||||
eMBTCPInit( USHORT ucTCPPort )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( ( eStatus = eMBTCPDoInit( ucTCPPort ) ) != MB_ENOERR )
|
||||
{
|
||||
eMBState = STATE_DISABLED;
|
||||
}
|
||||
else if( !xMBPortEventInit( ) )
|
||||
{
|
||||
/* Port dependent event module initalization failed. */
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
pvMBFrameStartCur = eMBTCPStart;
|
||||
pvMBFrameStopCur = eMBTCPStop;
|
||||
peMBFrameReceiveCur = eMBTCPReceive;
|
||||
peMBFrameSendCur = eMBTCPSend;
|
||||
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBTCPPortClose : NULL;
|
||||
ucMBAddress = MB_TCP_PSEUDO_ADDRESS;
|
||||
eMBCurrentMode = MB_TCP;
|
||||
eMBState = STATE_DISABLED;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
||||
|
||||
eMBErrorCode
|
||||
eMBRegisterCB( UCHAR ucFunctionCode, pxMBFunctionHandler pxHandler )
|
||||
{
|
||||
int i;
|
||||
eMBErrorCode eStatus;
|
||||
|
||||
if( ( 0 < ucFunctionCode ) && ( ucFunctionCode <= 127 ) )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
if( pxHandler != NULL )
|
||||
{
|
||||
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
|
||||
{
|
||||
if( ( xFuncHandlers[i].pxHandler == NULL ) ||
|
||||
( xFuncHandlers[i].pxHandler == pxHandler ) )
|
||||
{
|
||||
xFuncHandlers[i].ucFunctionCode = ucFunctionCode;
|
||||
xFuncHandlers[i].pxHandler = pxHandler;
|
||||
break;
|
||||
}
|
||||
}
|
||||
eStatus = ( i != MB_FUNC_HANDLERS_MAX ) ? MB_ENOERR : MB_ENORES;
|
||||
}
|
||||
else
|
||||
{
|
||||
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
|
||||
{
|
||||
if( xFuncHandlers[i].ucFunctionCode == ucFunctionCode )
|
||||
{
|
||||
xFuncHandlers[i].ucFunctionCode = 0;
|
||||
xFuncHandlers[i].pxHandler = NULL;
|
||||
break;
|
||||
}
|
||||
}
|
||||
/* Remove can't fail. */
|
||||
eStatus = MB_ENOERR;
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EINVAL;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
|
||||
eMBErrorCode
|
||||
eMBClose( void )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
if( pvMBFrameCloseCur != NULL )
|
||||
{
|
||||
pvMBFrameCloseCur( );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
|
||||
eMBErrorCode
|
||||
eMBEnable( void )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
/* Activate the protocol stack. */
|
||||
pvMBFrameStartCur( );
|
||||
eMBState = STATE_ENABLED;
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBDisable( void )
|
||||
{
|
||||
eMBErrorCode eStatus;
|
||||
|
||||
if( eMBState == STATE_ENABLED )
|
||||
{
|
||||
pvMBFrameStopCur( );
|
||||
eMBState = STATE_DISABLED;
|
||||
eStatus = MB_ENOERR;
|
||||
}
|
||||
else if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
eStatus = MB_ENOERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode eMBPoll( void )
|
||||
{
|
||||
static UCHAR *ucMBFrame;
|
||||
static UCHAR ucRcvAddress;
|
||||
static UCHAR ucFunctionCode;
|
||||
static USHORT usLength;
|
||||
static eMBException eException;
|
||||
|
||||
int i;
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
eMBEventType eEvent;
|
||||
|
||||
/* Check if the protocol stack is ready. */
|
||||
if( eMBState != STATE_ENABLED )
|
||||
{
|
||||
return MB_EILLSTATE;
|
||||
}
|
||||
|
||||
/* Check if there is a event available. If not return control to caller.
|
||||
* Otherwise we will handle the event. */
|
||||
if( xMBPortEventGet( &eEvent ) == TRUE )
|
||||
{
|
||||
switch ( eEvent )
|
||||
{
|
||||
case EV_READY:
|
||||
break;
|
||||
|
||||
case EV_FRAME_RECEIVED:
|
||||
eStatus = peMBFrameReceiveCur( &ucRcvAddress, &ucMBFrame, &usLength );
|
||||
if( eStatus == MB_ENOERR )
|
||||
{
|
||||
/* Check if the frame is for us. If not ignore the frame. */
|
||||
if( ( ucRcvAddress == ucMBAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) )
|
||||
{
|
||||
( void )xMBPortEventPost( EV_EXECUTE );
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case EV_EXECUTE:
|
||||
ucFunctionCode = ucMBFrame[MB_PDU_FUNC_OFF];
|
||||
eException = MB_EX_ILLEGAL_FUNCTION;
|
||||
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
|
||||
{
|
||||
/* No more function handlers registered. Abort. */
|
||||
if( xFuncHandlers[i].ucFunctionCode == 0 )
|
||||
{
|
||||
break;
|
||||
}
|
||||
else if( xFuncHandlers[i].ucFunctionCode == ucFunctionCode )
|
||||
{
|
||||
eException = xFuncHandlers[i].pxHandler( ucMBFrame, &usLength );
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* If the request was not sent to the broadcast address we
|
||||
* return a reply. */
|
||||
if( ucRcvAddress != MB_ADDRESS_BROADCAST )
|
||||
{
|
||||
if( eException != MB_EX_NONE )
|
||||
{
|
||||
/* An exception occured. Build an error frame. */
|
||||
usLength = 0;
|
||||
ucMBFrame[usLength++] = ( UCHAR )( ucFunctionCode | MB_FUNC_ERROR );
|
||||
ucMBFrame[usLength++] = eException;
|
||||
}
|
||||
eStatus = peMBFrameSendCur( ucMBAddress, ucMBFrame, usLength );
|
||||
}
|
||||
break;
|
||||
|
||||
case EV_FRAME_SENT:
|
||||
break;
|
||||
}
|
||||
}
|
||||
return MB_ENOERR;
|
||||
}
|
|
@ -1,406 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbrtu_m.c,v 1.60 2013/08/20 11:18:10 Armink Add Master Functions $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbconfig.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbproto.h"
|
||||
#include "mbfunc.h"
|
||||
|
||||
#include "mbport.h"
|
||||
#if MB_MASTER_RTU_ENABLED == 1
|
||||
#include "mbrtu.h"
|
||||
#endif
|
||||
#if MB_MASTER_ASCII_ENABLED == 1
|
||||
#include "mbascii.h"
|
||||
#endif
|
||||
#if MB_MASTER_TCP_ENABLED == 1
|
||||
#include "mbtcp.h"
|
||||
#endif
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
|
||||
#ifndef MB_PORT_HAS_CLOSE
|
||||
#define MB_PORT_HAS_CLOSE 0
|
||||
#endif
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
|
||||
static UCHAR ucMBMasterDestAddress;
|
||||
static BOOL xMBRunInMasterMode = FALSE;
|
||||
static eMBMasterErrorEventType eMBMasterCurErrorType;
|
||||
|
||||
static enum
|
||||
{
|
||||
STATE_ENABLED,
|
||||
STATE_DISABLED,
|
||||
STATE_NOT_INITIALIZED
|
||||
} eMBState = STATE_NOT_INITIALIZED;
|
||||
|
||||
/* Functions pointer which are initialized in eMBInit( ). Depending on the
|
||||
* mode (RTU or ASCII) the are set to the correct implementations.
|
||||
* Using for Modbus Master,Add by Armink 20130813
|
||||
*/
|
||||
static peMBFrameSend peMBMasterFrameSendCur;
|
||||
static pvMBFrameStart pvMBMasterFrameStartCur;
|
||||
static pvMBFrameStop pvMBMasterFrameStopCur;
|
||||
static peMBFrameReceive peMBMasterFrameReceiveCur;
|
||||
static pvMBFrameClose pvMBMasterFrameCloseCur;
|
||||
|
||||
/* Callback functions required by the porting layer. They are called when
|
||||
* an external event has happend which includes a timeout or the reception
|
||||
* or transmission of a character.
|
||||
* Using for Modbus Master,Add by Armink 20130813
|
||||
*/
|
||||
BOOL( *pxMBMasterFrameCBByteReceived ) ( void );
|
||||
BOOL( *pxMBMasterFrameCBTransmitterEmpty ) ( void );
|
||||
BOOL( *pxMBMasterPortCBTimerExpired ) ( void );
|
||||
|
||||
BOOL( *pxMBMasterFrameCBReceiveFSMCur ) ( void );
|
||||
BOOL( *pxMBMasterFrameCBTransmitFSMCur ) ( void );
|
||||
|
||||
/* An array of Modbus functions handlers which associates Modbus function
|
||||
* codes with implementing functions.
|
||||
*/
|
||||
static xMBFunctionHandler xMasterFuncHandlers[MB_FUNC_HANDLERS_MAX] = {
|
||||
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
|
||||
//TODO Add Master function define
|
||||
{MB_FUNC_OTHER_REPORT_SLAVEID, eMBFuncReportSlaveID},
|
||||
#endif
|
||||
#if MB_FUNC_READ_INPUT_ENABLED > 0
|
||||
{MB_FUNC_READ_INPUT_REGISTER, eMBMasterFuncReadInputRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_READ_HOLDING_REGISTER, eMBMasterFuncReadHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_WRITE_MULTIPLE_REGISTERS, eMBMasterFuncWriteMultipleHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_WRITE_REGISTER, eMBMasterFuncWriteHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
||||
{MB_FUNC_READWRITE_MULTIPLE_REGISTERS, eMBMasterFuncReadWriteMultipleHoldingRegister},
|
||||
#endif
|
||||
#if MB_FUNC_READ_COILS_ENABLED > 0
|
||||
{MB_FUNC_READ_COILS, eMBMasterFuncReadCoils},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_COIL_ENABLED > 0
|
||||
{MB_FUNC_WRITE_SINGLE_COIL, eMBMasterFuncWriteCoil},
|
||||
#endif
|
||||
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
|
||||
{MB_FUNC_WRITE_MULTIPLE_COILS, eMBMasterFuncWriteMultipleCoils},
|
||||
#endif
|
||||
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
|
||||
{MB_FUNC_READ_DISCRETE_INPUTS, eMBMasterFuncReadDiscreteInputs},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBMasterInit( eMBMode eMode, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
switch (eMode)
|
||||
{
|
||||
#if MB_MASTER_RTU_ENABLED > 0
|
||||
case MB_RTU:
|
||||
pvMBMasterFrameStartCur = eMBMasterRTUStart;
|
||||
pvMBMasterFrameStopCur = eMBMasterRTUStop;
|
||||
peMBMasterFrameSendCur = eMBMasterRTUSend;
|
||||
peMBMasterFrameReceiveCur = eMBMasterRTUReceive;
|
||||
pvMBMasterFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBMasterPortClose : NULL;
|
||||
pxMBMasterFrameCBByteReceived = xMBMasterRTUReceiveFSM;
|
||||
pxMBMasterFrameCBTransmitterEmpty = xMBMasterRTUTransmitFSM;
|
||||
pxMBMasterPortCBTimerExpired = xMBMasterRTUTimerExpired;
|
||||
|
||||
eStatus = eMBMasterRTUInit(ucPort, ulBaudRate, eParity);
|
||||
break;
|
||||
#endif
|
||||
#if MB_MASTER_ASCII_ENABLED > 0
|
||||
case MB_ASCII:
|
||||
pvMBMasterFrameStartCur = eMBMasterASCIIStart;
|
||||
pvMBMasterFrameStopCur = eMBMasterASCIIStop;
|
||||
peMBMasterFrameSendCur = eMBMasterASCIISend;
|
||||
peMBMasterFrameReceiveCur = eMBMasterASCIIReceive;
|
||||
pvMBMasterFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBMasterPortClose : NULL;
|
||||
pxMBMasterFrameCBByteReceived = xMBMasterASCIIReceiveFSM;
|
||||
pxMBMasterFrameCBTransmitterEmpty = xMBMasterASCIITransmitFSM;
|
||||
pxMBMasterPortCBTimerExpired = xMBMasterASCIITimerT1SExpired;
|
||||
|
||||
eStatus = eMBMasterASCIIInit(ucPort, ulBaudRate, eParity );
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
eStatus = MB_EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
if (eStatus == MB_ENOERR)
|
||||
{
|
||||
if (!xMBMasterPortEventInit())
|
||||
{
|
||||
/* port dependent event module initalization failed. */
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
eMBState = STATE_DISABLED;
|
||||
}
|
||||
/* initialize the OS resource for modbus master. */
|
||||
vMBMasterOsResInit();
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterClose( void )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
if( pvMBMasterFrameCloseCur != NULL )
|
||||
{
|
||||
pvMBMasterFrameCloseCur( );
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterEnable( void )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
/* Activate the protocol stack. */
|
||||
pvMBMasterFrameStartCur( );
|
||||
eMBState = STATE_ENABLED;
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterDisable( void )
|
||||
{
|
||||
eMBErrorCode eStatus;
|
||||
|
||||
if( eMBState == STATE_ENABLED )
|
||||
{
|
||||
pvMBMasterFrameStopCur( );
|
||||
eMBState = STATE_DISABLED;
|
||||
eStatus = MB_ENOERR;
|
||||
}
|
||||
else if( eMBState == STATE_DISABLED )
|
||||
{
|
||||
eStatus = MB_ENOERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EILLSTATE;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterPoll( void )
|
||||
{
|
||||
static UCHAR *ucMBFrame;
|
||||
static UCHAR ucRcvAddress;
|
||||
static UCHAR ucFunctionCode;
|
||||
static USHORT usLength;
|
||||
static eMBException eException;
|
||||
|
||||
int i , j;
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
eMBMasterEventType eEvent;
|
||||
eMBMasterErrorEventType errorType;
|
||||
|
||||
/* Check if the protocol stack is ready. */
|
||||
if( eMBState != STATE_ENABLED )
|
||||
{
|
||||
return MB_EILLSTATE;
|
||||
}
|
||||
|
||||
/* Check if there is a event available. If not return control to caller.
|
||||
* Otherwise we will handle the event. */
|
||||
if( xMBMasterPortEventGet( &eEvent ) == TRUE )
|
||||
{
|
||||
switch ( eEvent )
|
||||
{
|
||||
case EV_MASTER_READY:
|
||||
break;
|
||||
|
||||
case EV_MASTER_FRAME_RECEIVED:
|
||||
eStatus = peMBMasterFrameReceiveCur( &ucRcvAddress, &ucMBFrame, &usLength );
|
||||
/* Check if the frame is for us. If not ,send an error process event. */
|
||||
if ( ( eStatus == MB_ENOERR ) && ( ucRcvAddress == ucMBMasterGetDestAddress() ) )
|
||||
{
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_EXECUTE );
|
||||
}
|
||||
else
|
||||
{
|
||||
vMBMasterSetErrorType(EV_ERROR_RECEIVE_DATA);
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_ERROR_PROCESS );
|
||||
}
|
||||
break;
|
||||
|
||||
case EV_MASTER_EXECUTE:
|
||||
ucFunctionCode = ucMBFrame[MB_PDU_FUNC_OFF];
|
||||
eException = MB_EX_ILLEGAL_FUNCTION;
|
||||
/* If receive frame has exception .The receive function code highest bit is 1.*/
|
||||
if(ucFunctionCode >> 7) {
|
||||
eException = (eMBException)ucMBFrame[MB_PDU_DATA_OFF];
|
||||
}
|
||||
else
|
||||
{
|
||||
for (i = 0; i < MB_FUNC_HANDLERS_MAX; i++)
|
||||
{
|
||||
/* No more function handlers registered. Abort. */
|
||||
if (xMasterFuncHandlers[i].ucFunctionCode == 0) {
|
||||
break;
|
||||
}
|
||||
else if (xMasterFuncHandlers[i].ucFunctionCode == ucFunctionCode) {
|
||||
vMBMasterSetCBRunInMasterMode(TRUE);
|
||||
/* If master request is broadcast,
|
||||
* the master need execute function for all slave.
|
||||
*/
|
||||
if ( xMBMasterRequestIsBroadcast() ) {
|
||||
usLength = usMBMasterGetPDUSndLength();
|
||||
for(j = 1; j <= MB_MASTER_TOTAL_SLAVE_NUM; j++){
|
||||
vMBMasterSetDestAddress(j);
|
||||
eException = xMasterFuncHandlers[i].pxHandler(ucMBFrame, &usLength);
|
||||
}
|
||||
}
|
||||
else {
|
||||
eException = xMasterFuncHandlers[i].pxHandler(ucMBFrame, &usLength);
|
||||
}
|
||||
vMBMasterSetCBRunInMasterMode(FALSE);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
/* If master has exception ,Master will send error process.Otherwise the Master is idle.*/
|
||||
if (eException != MB_EX_NONE) {
|
||||
vMBMasterSetErrorType(EV_ERROR_EXECUTE_FUNCTION);
|
||||
( void ) xMBMasterPortEventPost( EV_MASTER_ERROR_PROCESS );
|
||||
}
|
||||
else {
|
||||
vMBMasterCBRequestScuuess( );
|
||||
vMBMasterRunResRelease( );
|
||||
}
|
||||
break;
|
||||
|
||||
case EV_MASTER_FRAME_SENT:
|
||||
/* Master is busy now. */
|
||||
vMBMasterGetPDUSndBuf( &ucMBFrame );
|
||||
eStatus = peMBMasterFrameSendCur( ucMBMasterGetDestAddress(), ucMBFrame, usMBMasterGetPDUSndLength() );
|
||||
break;
|
||||
|
||||
case EV_MASTER_ERROR_PROCESS:
|
||||
/* Execute specified error process callback function. */
|
||||
errorType = eMBMasterGetErrorType();
|
||||
vMBMasterGetPDUSndBuf( &ucMBFrame );
|
||||
switch (errorType) {
|
||||
case EV_ERROR_RESPOND_TIMEOUT:
|
||||
vMBMasterErrorCBRespondTimeout(ucMBMasterGetDestAddress(),
|
||||
ucMBFrame, usMBMasterGetPDUSndLength());
|
||||
break;
|
||||
case EV_ERROR_RECEIVE_DATA:
|
||||
vMBMasterErrorCBReceiveData(ucMBMasterGetDestAddress(),
|
||||
ucMBFrame, usMBMasterGetPDUSndLength());
|
||||
break;
|
||||
case EV_ERROR_EXECUTE_FUNCTION:
|
||||
vMBMasterErrorCBExecuteFunction(ucMBMasterGetDestAddress(),
|
||||
ucMBFrame, usMBMasterGetPDUSndLength());
|
||||
break;
|
||||
}
|
||||
vMBMasterRunResRelease();
|
||||
break;
|
||||
}
|
||||
}
|
||||
return MB_ENOERR;
|
||||
}
|
||||
|
||||
/* Get whether the Modbus Master is run in master mode.*/
|
||||
BOOL xMBMasterGetCBRunInMasterMode( void )
|
||||
{
|
||||
return xMBRunInMasterMode;
|
||||
}
|
||||
/* Set whether the Modbus Master is run in master mode.*/
|
||||
void vMBMasterSetCBRunInMasterMode( BOOL IsMasterMode )
|
||||
{
|
||||
xMBRunInMasterMode = IsMasterMode;
|
||||
}
|
||||
/* Get Modbus Master send destination address. */
|
||||
UCHAR ucMBMasterGetDestAddress( void )
|
||||
{
|
||||
return ucMBMasterDestAddress;
|
||||
}
|
||||
/* Set Modbus Master send destination address. */
|
||||
void vMBMasterSetDestAddress( UCHAR Address )
|
||||
{
|
||||
ucMBMasterDestAddress = Address;
|
||||
}
|
||||
/* Get Modbus Master current error event type. */
|
||||
eMBMasterErrorEventType eMBMasterGetErrorType( void )
|
||||
{
|
||||
return eMBMasterCurErrorType;
|
||||
}
|
||||
/* Set Modbus Master current error event type. */
|
||||
void vMBMasterSetErrorType( eMBMasterErrorEventType errorType )
|
||||
{
|
||||
eMBMasterCurErrorType = errorType;
|
||||
}
|
||||
|
||||
|
||||
|
||||
#endif
|
|
@ -1,98 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbcrc.c,v 1.7 2007/02/18 23:50:27 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
static const UCHAR aucCRCHi[] = {
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
||||
0x00, 0xC1, 0x81, 0x40
|
||||
};
|
||||
|
||||
static const UCHAR aucCRCLo[] = {
|
||||
0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7,
|
||||
0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E,
|
||||
0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9,
|
||||
0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC,
|
||||
0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
|
||||
0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
|
||||
0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D,
|
||||
0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38,
|
||||
0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF,
|
||||
0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
|
||||
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1,
|
||||
0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4,
|
||||
0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB,
|
||||
0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA,
|
||||
0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
|
||||
0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
|
||||
0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97,
|
||||
0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E,
|
||||
0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89,
|
||||
0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
|
||||
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83,
|
||||
0x41, 0x81, 0x80, 0x40
|
||||
};
|
||||
|
||||
USHORT
|
||||
usMBCRC16( UCHAR * pucFrame, USHORT usLen )
|
||||
{
|
||||
UCHAR ucCRCHi = 0xFF;
|
||||
UCHAR ucCRCLo = 0xFF;
|
||||
int iIndex;
|
||||
|
||||
while( usLen-- )
|
||||
{
|
||||
iIndex = ucCRCLo ^ *( pucFrame++ );
|
||||
ucCRCLo = ( UCHAR )( ucCRCHi ^ aucCRCHi[iIndex] );
|
||||
ucCRCHi = aucCRCLo[iIndex];
|
||||
}
|
||||
return ( USHORT )( ucCRCHi << 8 | ucCRCLo );
|
||||
}
|
|
@ -1,36 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbcrc.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_CRC_H
|
||||
#define _MB_CRC_H
|
||||
|
||||
USHORT usMBCRC16( UCHAR * pucFrame, USHORT usLen );
|
||||
|
||||
#endif
|
|
@ -1,354 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbrtu.c,v 1.18 2007/09/12 10:15:56 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbrtu.h"
|
||||
#include "mbframe.h"
|
||||
|
||||
#include "mbcrc.h"
|
||||
#include "mbport.h"
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */
|
||||
#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus RTU frame. */
|
||||
#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */
|
||||
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
|
||||
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
typedef enum
|
||||
{
|
||||
STATE_RX_INIT, /*!< Receiver is in initial state. */
|
||||
STATE_RX_IDLE, /*!< Receiver is in idle state. */
|
||||
STATE_RX_RCV, /*!< Frame is beeing received. */
|
||||
STATE_RX_ERROR /*!< If the frame is invalid. */
|
||||
} eMBRcvState;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
STATE_TX_IDLE, /*!< Transmitter is in idle state. */
|
||||
STATE_TX_XMIT /*!< Transmitter is in transfer state. */
|
||||
} eMBSndState;
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
static volatile eMBSndState eSndState;
|
||||
static volatile eMBRcvState eRcvState;
|
||||
|
||||
volatile UCHAR ucRTUBuf[MB_SER_PDU_SIZE_MAX];
|
||||
|
||||
static volatile UCHAR *pucSndBufferCur;
|
||||
static volatile USHORT usSndBufferCount;
|
||||
|
||||
static volatile USHORT usRcvBufferPos;
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBRTUInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
ULONG usTimerT35_50us;
|
||||
|
||||
( void )ucSlaveAddress;
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
|
||||
/* Modbus RTU uses 8 Databits. */
|
||||
if( xMBPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* If baudrate > 19200 then we should use the fixed timer values
|
||||
* t35 = 1750us. Otherwise t35 must be 3.5 times the character time.
|
||||
*/
|
||||
if( ulBaudRate > 19200 )
|
||||
{
|
||||
usTimerT35_50us = 35; /* 1800us. */
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The timer reload value for a character is given by:
|
||||
*
|
||||
* ChTimeValue = Ticks_per_1s / ( Baudrate / 11 )
|
||||
* = 11 * Ticks_per_1s / Baudrate
|
||||
* = 220000 / Baudrate
|
||||
* The reload for t3.5 is 1.5 times this value and similary
|
||||
* for t3.5.
|
||||
*/
|
||||
usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate );
|
||||
}
|
||||
if( xMBPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
void
|
||||
eMBRTUStart( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
/* Initially the receiver is in the state STATE_RX_INIT. we start
|
||||
* the timer and if no character is received within t3.5 we change
|
||||
* to STATE_RX_IDLE. This makes sure that we delay startup of the
|
||||
* modbus protocol stack until the bus is free.
|
||||
*/
|
||||
eRcvState = STATE_RX_INIT;
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
vMBPortTimersEnable( );
|
||||
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
|
||||
void
|
||||
eMBRTUStop( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
vMBPortSerialEnable( FALSE, FALSE );
|
||||
vMBPortTimersDisable( );
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
RT_ASSERT( usRcvBufferPos <= MB_SER_PDU_SIZE_MAX );
|
||||
|
||||
/* Length and CRC check */
|
||||
if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN )
|
||||
&& ( usMBCRC16( ( UCHAR * ) ucRTUBuf, usRcvBufferPos ) == 0 ) )
|
||||
{
|
||||
/* Save the address field. All frames are passed to the upper layed
|
||||
* and the decision if a frame is used is done there.
|
||||
*/
|
||||
*pucRcvAddress = ucRTUBuf[MB_SER_PDU_ADDR_OFF];
|
||||
|
||||
/* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
|
||||
* size of address field and CRC checksum.
|
||||
*/
|
||||
*pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC );
|
||||
|
||||
/* Return the start of the Modbus PDU to the caller. */
|
||||
*pucFrame = ( UCHAR * ) & ucRTUBuf[MB_SER_PDU_PDU_OFF];
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT usCRC16;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
|
||||
/* Check if the receiver is still in idle state. If not we where to
|
||||
* slow with processing the received frame and the master sent another
|
||||
* frame on the network. We have to abort sending the frame.
|
||||
*/
|
||||
if( eRcvState == STATE_RX_IDLE )
|
||||
{
|
||||
/* First byte before the Modbus-PDU is the slave address. */
|
||||
pucSndBufferCur = ( UCHAR * ) pucFrame - 1;
|
||||
usSndBufferCount = 1;
|
||||
|
||||
/* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
|
||||
pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
|
||||
usSndBufferCount += usLength;
|
||||
|
||||
/* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */
|
||||
usCRC16 = usMBCRC16( ( UCHAR * ) pucSndBufferCur, usSndBufferCount );
|
||||
ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
|
||||
ucRTUBuf[usSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
|
||||
|
||||
/* Activate the transmitter. */
|
||||
eSndState = STATE_TX_XMIT;
|
||||
vMBPortSerialEnable( FALSE, TRUE );
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBRTUReceiveFSM( void )
|
||||
{
|
||||
BOOL xTaskNeedSwitch = FALSE;
|
||||
UCHAR ucByte;
|
||||
|
||||
RT_ASSERT( eSndState == STATE_TX_IDLE );
|
||||
|
||||
/* Always read the character. */
|
||||
( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte );
|
||||
|
||||
switch ( eRcvState )
|
||||
{
|
||||
/* If we have received a character in the init state we have to
|
||||
* wait until the frame is finished.
|
||||
*/
|
||||
case STATE_RX_INIT:
|
||||
vMBPortTimersEnable( );
|
||||
break;
|
||||
|
||||
/* In the error state we wait until all characters in the
|
||||
* damaged frame are transmitted.
|
||||
*/
|
||||
case STATE_RX_ERROR:
|
||||
vMBPortTimersEnable( );
|
||||
break;
|
||||
|
||||
/* In the idle state we wait for a new character. If a character
|
||||
* is received the t1.5 and t3.5 timers are started and the
|
||||
* receiver is in the state STATE_RX_RECEIVCE.
|
||||
*/
|
||||
case STATE_RX_IDLE:
|
||||
usRcvBufferPos = 0;
|
||||
ucRTUBuf[usRcvBufferPos++] = ucByte;
|
||||
eRcvState = STATE_RX_RCV;
|
||||
|
||||
/* Enable t3.5 timers. */
|
||||
vMBPortTimersEnable( );
|
||||
break;
|
||||
|
||||
/* We are currently receiving a frame. Reset the timer after
|
||||
* every character received. If more than the maximum possible
|
||||
* number of bytes in a modbus frame is received the frame is
|
||||
* ignored.
|
||||
*/
|
||||
case STATE_RX_RCV:
|
||||
if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX )
|
||||
{
|
||||
ucRTUBuf[usRcvBufferPos++] = ucByte;
|
||||
}
|
||||
else
|
||||
{
|
||||
eRcvState = STATE_RX_ERROR;
|
||||
}
|
||||
vMBPortTimersEnable();
|
||||
break;
|
||||
}
|
||||
return xTaskNeedSwitch;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBRTUTransmitFSM( void )
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
|
||||
RT_ASSERT( eRcvState == STATE_RX_IDLE );
|
||||
|
||||
switch ( eSndState )
|
||||
{
|
||||
/* We should not get a transmitter event if the transmitter is in
|
||||
* idle state. */
|
||||
case STATE_TX_IDLE:
|
||||
/* enable receiver/disable transmitter. */
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
break;
|
||||
|
||||
case STATE_TX_XMIT:
|
||||
/* check if we are finished. */
|
||||
if( usSndBufferCount != 0 )
|
||||
{
|
||||
xMBPortSerialPutByte( ( CHAR )*pucSndBufferCur );
|
||||
pucSndBufferCur++; /* next byte in sendbuffer. */
|
||||
usSndBufferCount--;
|
||||
}
|
||||
else
|
||||
{
|
||||
xNeedPoll = xMBPortEventPost( EV_FRAME_SENT );
|
||||
/* Disable transmitter. This prevents another transmit buffer
|
||||
* empty interrupt. */
|
||||
vMBPortSerialEnable( TRUE, FALSE );
|
||||
eSndState = STATE_TX_IDLE;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBRTUTimerT35Expired( void )
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
|
||||
switch ( eRcvState )
|
||||
{
|
||||
/* Timer t35 expired. Startup phase is finished. */
|
||||
case STATE_RX_INIT:
|
||||
xNeedPoll = xMBPortEventPost( EV_READY );
|
||||
break;
|
||||
|
||||
/* A frame was received and t35 expired. Notify the listener that
|
||||
* a new frame was received. */
|
||||
case STATE_RX_RCV:
|
||||
xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED );
|
||||
break;
|
||||
|
||||
/* An error occured while receiving the frame. */
|
||||
case STATE_RX_ERROR:
|
||||
break;
|
||||
|
||||
/* Function called in an illegal state. */
|
||||
default:
|
||||
RT_ASSERT( ( eRcvState == STATE_RX_INIT ) ||
|
||||
( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_ERROR ) );
|
||||
break;
|
||||
}
|
||||
|
||||
vMBPortTimersDisable( );
|
||||
eRcvState = STATE_RX_IDLE;
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
|
@ -1,64 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbrtu.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
|
||||
* File: $Id: mbrtu.h,v 1.60 2013/08/17 13:11:42 Armink Add Master Functions $
|
||||
*/
|
||||
#include "mbconfig.h"
|
||||
|
||||
#ifndef _MB_RTU_H
|
||||
#define _MB_RTU_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
eMBErrorCode eMBRTUInit( UCHAR slaveAddress, UCHAR ucPort, ULONG ulBaudRate,
|
||||
eMBParity eParity );
|
||||
void eMBRTUStart( void );
|
||||
void eMBRTUStop( void );
|
||||
eMBErrorCode eMBRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength );
|
||||
eMBErrorCode eMBRTUSend( UCHAR slaveAddress, const UCHAR * pucFrame, USHORT usLength );
|
||||
BOOL xMBRTUReceiveFSM( void );
|
||||
BOOL xMBRTUTransmitFSM( void );
|
||||
BOOL xMBRTUTimerT15Expired( void );
|
||||
BOOL xMBRTUTimerT35Expired( void );
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0
|
||||
eMBErrorCode eMBMasterRTUInit( UCHAR ucPort, ULONG ulBaudRate,eMBParity eParity );
|
||||
void eMBMasterRTUStart( void );
|
||||
void eMBMasterRTUStop( void );
|
||||
eMBErrorCode eMBMasterRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength );
|
||||
eMBErrorCode eMBMasterRTUSend( UCHAR slaveAddress, const UCHAR * pucFrame, USHORT usLength );
|
||||
BOOL xMBMasterRTUReceiveFSM( void );
|
||||
BOOL xMBMasterRTUTransmitFSM( void );
|
||||
BOOL xMBMasterRTUTimerExpired( void );
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,443 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2013 China Beijing Armink <armink.ztl@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbrtu_m.c,v 1.60 2013/08/17 11:42:56 Armink Add Master Functions $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbrtu.h"
|
||||
#include "mbframe.h"
|
||||
|
||||
#include "mbcrc.h"
|
||||
#include "mbport.h"
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_SER_PDU_SIZE_MIN 4 /*!< Minimum size of a Modbus RTU frame. */
|
||||
#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus RTU frame. */
|
||||
#define MB_SER_PDU_SIZE_CRC 2 /*!< Size of CRC field in PDU. */
|
||||
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
|
||||
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
|
||||
|
||||
/* ----------------------- Type definitions ---------------------------------*/
|
||||
typedef enum
|
||||
{
|
||||
STATE_M_RX_INIT, /*!< Receiver is in initial state. */
|
||||
STATE_M_RX_IDLE, /*!< Receiver is in idle state. */
|
||||
STATE_M_RX_RCV, /*!< Frame is beeing received. */
|
||||
STATE_M_RX_ERROR, /*!< If the frame is invalid. */
|
||||
} eMBMasterRcvState;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
STATE_M_TX_IDLE, /*!< Transmitter is in idle state. */
|
||||
STATE_M_TX_XMIT, /*!< Transmitter is in transfer state. */
|
||||
STATE_M_TX_XFWR, /*!< Transmitter is in transfer finish and wait receive state. */
|
||||
} eMBMasterSndState;
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
static volatile eMBMasterSndState eSndState;
|
||||
static volatile eMBMasterRcvState eRcvState;
|
||||
|
||||
static volatile UCHAR ucMasterRTUSndBuf[MB_PDU_SIZE_MAX];
|
||||
static volatile UCHAR ucMasterRTURcvBuf[MB_SER_PDU_SIZE_MAX];
|
||||
static volatile USHORT usMasterSendPDULength;
|
||||
|
||||
static volatile UCHAR *pucMasterSndBufferCur;
|
||||
static volatile USHORT usMasterSndBufferCount;
|
||||
|
||||
static volatile USHORT usMasterRcvBufferPos;
|
||||
static volatile BOOL xFrameIsBroadcast = FALSE;
|
||||
|
||||
static volatile eMBMasterTimerMode eMasterCurTimerMode;
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBMasterRTUInit(UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
ULONG usTimerT35_50us;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
|
||||
/* Modbus RTU uses 8 Databits. */
|
||||
if( xMBMasterPortSerialInit( ucPort, ulBaudRate, 8, eParity ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* If baudrate > 19200 then we should use the fixed timer values
|
||||
* t35 = 1750us. Otherwise t35 must be 3.5 times the character time.
|
||||
*/
|
||||
if( ulBaudRate > 19200 )
|
||||
{
|
||||
usTimerT35_50us = 35; /* 1800us. */
|
||||
}
|
||||
else
|
||||
{
|
||||
/* The timer reload value for a character is given by:
|
||||
*
|
||||
* ChTimeValue = Ticks_per_1s / ( Baudrate / 11 )
|
||||
* = 11 * Ticks_per_1s / Baudrate
|
||||
* = 220000 / Baudrate
|
||||
* The reload for t3.5 is 1.5 times this value and similary
|
||||
* for t3.5.
|
||||
*/
|
||||
usTimerT35_50us = ( 7UL * 220000UL ) / ( 2UL * ulBaudRate );
|
||||
}
|
||||
if( xMBMasterPortTimersInit( ( USHORT ) usTimerT35_50us ) != TRUE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
void
|
||||
eMBMasterRTUStart( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
/* Initially the receiver is in the state STATE_M_RX_INIT. we start
|
||||
* the timer and if no character is received within t3.5 we change
|
||||
* to STATE_M_RX_IDLE. This makes sure that we delay startup of the
|
||||
* modbus protocol stack until the bus is free.
|
||||
*/
|
||||
eRcvState = STATE_M_RX_INIT;
|
||||
vMBMasterPortSerialEnable( TRUE, FALSE );
|
||||
vMBMasterPortTimersT35Enable( );
|
||||
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
|
||||
void
|
||||
eMBMasterRTUStop( void )
|
||||
{
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
vMBMasterPortSerialEnable( FALSE, FALSE );
|
||||
vMBMasterPortTimersDisable( );
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterRTUReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
RT_ASSERT( usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX );
|
||||
|
||||
/* Length and CRC check */
|
||||
if( ( usMasterRcvBufferPos >= MB_SER_PDU_SIZE_MIN )
|
||||
&& ( usMBCRC16( ( UCHAR * ) ucMasterRTURcvBuf, usMasterRcvBufferPos ) == 0 ) )
|
||||
{
|
||||
/* Save the address field. All frames are passed to the upper layed
|
||||
* and the decision if a frame is used is done there.
|
||||
*/
|
||||
*pucRcvAddress = ucMasterRTURcvBuf[MB_SER_PDU_ADDR_OFF];
|
||||
|
||||
/* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
|
||||
* size of address field and CRC checksum.
|
||||
*/
|
||||
*pusLength = ( USHORT )( usMasterRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC );
|
||||
|
||||
/* Return the start of the Modbus PDU to the caller. */
|
||||
*pucFrame = ( UCHAR * ) & ucMasterRTURcvBuf[MB_SER_PDU_PDU_OFF];
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBMasterRTUSend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT usCRC16;
|
||||
|
||||
if ( ucSlaveAddress > MB_MASTER_TOTAL_SLAVE_NUM ) return MB_EINVAL;
|
||||
|
||||
ENTER_CRITICAL_SECTION( );
|
||||
|
||||
/* Check if the receiver is still in idle state. If not we where to
|
||||
* slow with processing the received frame and the master sent another
|
||||
* frame on the network. We have to abort sending the frame.
|
||||
*/
|
||||
if( eRcvState == STATE_M_RX_IDLE )
|
||||
{
|
||||
/* First byte before the Modbus-PDU is the slave address. */
|
||||
pucMasterSndBufferCur = ( UCHAR * ) pucFrame - 1;
|
||||
usMasterSndBufferCount = 1;
|
||||
|
||||
/* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
|
||||
pucMasterSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
|
||||
usMasterSndBufferCount += usLength;
|
||||
|
||||
/* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */
|
||||
usCRC16 = usMBCRC16( ( UCHAR * ) pucMasterSndBufferCur, usMasterSndBufferCount );
|
||||
ucMasterRTUSndBuf[usMasterSndBufferCount++] = ( UCHAR )( usCRC16 & 0xFF );
|
||||
ucMasterRTUSndBuf[usMasterSndBufferCount++] = ( UCHAR )( usCRC16 >> 8 );
|
||||
|
||||
/* Activate the transmitter. */
|
||||
eSndState = STATE_M_TX_XMIT;
|
||||
vMBMasterPortSerialEnable( FALSE, TRUE );
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
EXIT_CRITICAL_SECTION( );
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBMasterRTUReceiveFSM( void )
|
||||
{
|
||||
BOOL xTaskNeedSwitch = FALSE;
|
||||
UCHAR ucByte;
|
||||
|
||||
RT_ASSERT(( eSndState == STATE_M_TX_IDLE ) || ( eSndState == STATE_M_TX_XFWR ));
|
||||
|
||||
/* Always read the character. */
|
||||
( void )xMBMasterPortSerialGetByte( ( CHAR * ) & ucByte );
|
||||
|
||||
switch ( eRcvState )
|
||||
{
|
||||
/* If we have received a character in the init state we have to
|
||||
* wait until the frame is finished.
|
||||
*/
|
||||
case STATE_M_RX_INIT:
|
||||
vMBMasterPortTimersT35Enable( );
|
||||
break;
|
||||
|
||||
/* In the error state we wait until all characters in the
|
||||
* damaged frame are transmitted.
|
||||
*/
|
||||
case STATE_M_RX_ERROR:
|
||||
vMBMasterPortTimersT35Enable( );
|
||||
break;
|
||||
|
||||
/* In the idle state we wait for a new character. If a character
|
||||
* is received the t1.5 and t3.5 timers are started and the
|
||||
* receiver is in the state STATE_RX_RECEIVCE and disable early
|
||||
* the timer of respond timeout .
|
||||
*/
|
||||
case STATE_M_RX_IDLE:
|
||||
/* In time of respond timeout,the receiver receive a frame.
|
||||
* Disable timer of respond timeout and change the transmiter state to idle.
|
||||
*/
|
||||
vMBMasterPortTimersDisable( );
|
||||
eSndState = STATE_M_TX_IDLE;
|
||||
|
||||
usMasterRcvBufferPos = 0;
|
||||
ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte;
|
||||
eRcvState = STATE_M_RX_RCV;
|
||||
|
||||
/* Enable t3.5 timers. */
|
||||
vMBMasterPortTimersT35Enable( );
|
||||
break;
|
||||
|
||||
/* We are currently receiving a frame. Reset the timer after
|
||||
* every character received. If more than the maximum possible
|
||||
* number of bytes in a modbus frame is received the frame is
|
||||
* ignored.
|
||||
*/
|
||||
case STATE_M_RX_RCV:
|
||||
if( usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX )
|
||||
{
|
||||
ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte;
|
||||
}
|
||||
else
|
||||
{
|
||||
eRcvState = STATE_M_RX_ERROR;
|
||||
}
|
||||
vMBMasterPortTimersT35Enable();
|
||||
break;
|
||||
}
|
||||
return xTaskNeedSwitch;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBMasterRTUTransmitFSM( void )
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
|
||||
RT_ASSERT( eRcvState == STATE_M_RX_IDLE );
|
||||
|
||||
switch ( eSndState )
|
||||
{
|
||||
/* We should not get a transmitter event if the transmitter is in
|
||||
* idle state. */
|
||||
case STATE_M_TX_IDLE:
|
||||
/* enable receiver/disable transmitter. */
|
||||
vMBMasterPortSerialEnable( TRUE, FALSE );
|
||||
break;
|
||||
|
||||
case STATE_M_TX_XMIT:
|
||||
/* check if we are finished. */
|
||||
if( usMasterSndBufferCount != 0 )
|
||||
{
|
||||
xMBMasterPortSerialPutByte( ( CHAR )*pucMasterSndBufferCur );
|
||||
pucMasterSndBufferCur++; /* next byte in sendbuffer. */
|
||||
usMasterSndBufferCount--;
|
||||
}
|
||||
else
|
||||
{
|
||||
xFrameIsBroadcast = ( ucMasterRTUSndBuf[MB_SER_PDU_ADDR_OFF] == MB_ADDRESS_BROADCAST ) ? TRUE : FALSE;
|
||||
/* Disable transmitter. This prevents another transmit buffer
|
||||
* empty interrupt. */
|
||||
vMBMasterPortSerialEnable( TRUE, FALSE );
|
||||
eSndState = STATE_M_TX_XFWR;
|
||||
/* If the frame is broadcast ,master will enable timer of convert delay,
|
||||
* else master will enable timer of respond timeout. */
|
||||
if ( xFrameIsBroadcast == TRUE )
|
||||
{
|
||||
vMBMasterPortTimersConvertDelayEnable( );
|
||||
}
|
||||
else
|
||||
{
|
||||
vMBMasterPortTimersRespondTimeoutEnable( );
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBMasterRTUTimerExpired(void)
|
||||
{
|
||||
BOOL xNeedPoll = FALSE;
|
||||
|
||||
switch (eRcvState)
|
||||
{
|
||||
/* Timer t35 expired. Startup phase is finished. */
|
||||
case STATE_M_RX_INIT:
|
||||
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_READY);
|
||||
break;
|
||||
|
||||
/* A frame was received and t35 expired. Notify the listener that
|
||||
* a new frame was received. */
|
||||
case STATE_M_RX_RCV:
|
||||
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_FRAME_RECEIVED);
|
||||
break;
|
||||
|
||||
/* An error occured while receiving the frame. */
|
||||
case STATE_M_RX_ERROR:
|
||||
vMBMasterSetErrorType(EV_ERROR_RECEIVE_DATA);
|
||||
xNeedPoll = xMBMasterPortEventPost( EV_MASTER_ERROR_PROCESS );
|
||||
break;
|
||||
|
||||
/* Function called in an illegal state. */
|
||||
default:
|
||||
RT_ASSERT(
|
||||
( eRcvState == STATE_M_RX_INIT ) || ( eRcvState == STATE_M_RX_RCV ) ||
|
||||
( eRcvState == STATE_M_RX_ERROR ) || ( eRcvState == STATE_M_RX_IDLE ));
|
||||
break;
|
||||
}
|
||||
eRcvState = STATE_M_RX_IDLE;
|
||||
|
||||
switch (eSndState)
|
||||
{
|
||||
/* A frame was send finish and convert delay or respond timeout expired.
|
||||
* If the frame is broadcast,The master will idle,and if the frame is not
|
||||
* broadcast.Notify the listener process error.*/
|
||||
case STATE_M_TX_XFWR:
|
||||
if ( xFrameIsBroadcast == FALSE ) {
|
||||
vMBMasterSetErrorType(EV_ERROR_RESPOND_TIMEOUT);
|
||||
xNeedPoll = xMBMasterPortEventPost(EV_MASTER_ERROR_PROCESS);
|
||||
}
|
||||
break;
|
||||
/* Function called in an illegal state. */
|
||||
default:
|
||||
RT_ASSERT(
|
||||
( eSndState == STATE_M_TX_XFWR ) || ( eSndState == STATE_M_TX_IDLE ));
|
||||
break;
|
||||
}
|
||||
eSndState = STATE_M_TX_IDLE;
|
||||
|
||||
vMBMasterPortTimersDisable( );
|
||||
/* If timer mode is convert delay, the master event then turns EV_MASTER_EXECUTE status. */
|
||||
if (eMasterCurTimerMode == MB_TMODE_CONVERT_DELAY) {
|
||||
xNeedPoll = xMBMasterPortEventPost( EV_MASTER_EXECUTE );
|
||||
}
|
||||
|
||||
return xNeedPoll;
|
||||
}
|
||||
|
||||
/* Get Modbus Master send RTU's buffer address pointer.*/
|
||||
void vMBMasterGetRTUSndBuf( UCHAR ** pucFrame )
|
||||
{
|
||||
*pucFrame = ( UCHAR * ) ucMasterRTUSndBuf;
|
||||
}
|
||||
|
||||
/* Get Modbus Master send PDU's buffer address pointer.*/
|
||||
void vMBMasterGetPDUSndBuf( UCHAR ** pucFrame )
|
||||
{
|
||||
*pucFrame = ( UCHAR * ) &ucMasterRTUSndBuf[MB_SER_PDU_PDU_OFF];
|
||||
}
|
||||
|
||||
/* Set Modbus Master send PDU's buffer length.*/
|
||||
void vMBMasterSetPDUSndLength( USHORT SendPDULength )
|
||||
{
|
||||
usMasterSendPDULength = SendPDULength;
|
||||
}
|
||||
|
||||
/* Get Modbus Master send PDU's buffer length.*/
|
||||
USHORT usMBMasterGetPDUSndLength( void )
|
||||
{
|
||||
return usMasterSendPDULength;
|
||||
}
|
||||
|
||||
/* Set Modbus Master current timer mode.*/
|
||||
void vMBMasterSetCurTimerMode( eMBMasterTimerMode eMBTimerMode )
|
||||
{
|
||||
eMasterCurTimerMode = eMBTimerMode;
|
||||
}
|
||||
|
||||
/* The master request is broadcast? */
|
||||
BOOL xMBMasterRequestIsBroadcast( void ){
|
||||
return xFrameIsBroadcast;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,158 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbtcp.c,v 1.3 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes ----------------------------------*/
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbconfig.h"
|
||||
#include "mbtcp.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbport.h"
|
||||
|
||||
#if MB_SLAVE_TCP_ENABLED > 0
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
|
||||
/* ----------------------- MBAP Header --------------------------------------*/
|
||||
/*
|
||||
*
|
||||
* <------------------------ MODBUS TCP/IP ADU(1) ------------------------->
|
||||
* <----------- MODBUS PDU (1') ---------------->
|
||||
* +-----------+---------------+------------------------------------------+
|
||||
* | TID | PID | Length | UID |Code | Data |
|
||||
* +-----------+---------------+------------------------------------------+
|
||||
* | | | | |
|
||||
* (2) (3) (4) (5) (6)
|
||||
*
|
||||
* (2) ... MB_TCP_TID = 0 (Transaction Identifier - 2 Byte)
|
||||
* (3) ... MB_TCP_PID = 2 (Protocol Identifier - 2 Byte)
|
||||
* (4) ... MB_TCP_LEN = 4 (Number of bytes - 2 Byte)
|
||||
* (5) ... MB_TCP_UID = 6 (Unit Identifier - 1 Byte)
|
||||
* (6) ... MB_TCP_FUNC = 7 (Modbus Function Code)
|
||||
*
|
||||
* (1) ... Modbus TCP/IP Application Data Unit
|
||||
* (1') ... Modbus Protocol Data Unit
|
||||
*/
|
||||
|
||||
#define MB_TCP_TID 0
|
||||
#define MB_TCP_PID 2
|
||||
#define MB_TCP_LEN 4
|
||||
#define MB_TCP_UID 6
|
||||
#define MB_TCP_FUNC 7
|
||||
|
||||
#define MB_TCP_PROTOCOL_ID 0 /* 0 = Modbus Protocol */
|
||||
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
eMBErrorCode
|
||||
eMBTCPDoInit( USHORT ucTCPPort )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
|
||||
if( xMBTCPPortInit( ucTCPPort ) == FALSE )
|
||||
{
|
||||
eStatus = MB_EPORTERR;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
void
|
||||
eMBTCPStart( void )
|
||||
{
|
||||
}
|
||||
|
||||
void
|
||||
eMBTCPStop( void )
|
||||
{
|
||||
/* Make sure that no more clients are connected. */
|
||||
vMBTCPPortDisable( );
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBTCPReceive( UCHAR * pucRcvAddress, UCHAR ** ppucFrame, USHORT * pusLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_EIO;
|
||||
UCHAR *pucMBTCPFrame;
|
||||
USHORT usLength;
|
||||
USHORT usPID;
|
||||
|
||||
if( xMBTCPPortGetRequest( &pucMBTCPFrame, &usLength ) != FALSE )
|
||||
{
|
||||
usPID = pucMBTCPFrame[MB_TCP_PID] << 8U;
|
||||
usPID |= pucMBTCPFrame[MB_TCP_PID + 1];
|
||||
|
||||
if( usPID == MB_TCP_PROTOCOL_ID )
|
||||
{
|
||||
*ppucFrame = &pucMBTCPFrame[MB_TCP_FUNC];
|
||||
*pusLength = usLength - MB_TCP_FUNC;
|
||||
eStatus = MB_ENOERR;
|
||||
|
||||
/* Modbus TCP does not use any addresses. Fake the source address such
|
||||
* that the processing part deals with this frame.
|
||||
*/
|
||||
*pucRcvAddress = MB_TCP_PSEUDO_ADDRESS;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
eMBErrorCode
|
||||
eMBTCPSend( UCHAR _unused, const UCHAR * pucFrame, USHORT usLength )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
UCHAR *pucMBTCPFrame = ( UCHAR * ) pucFrame - MB_TCP_FUNC;
|
||||
USHORT usTCPLength = usLength + MB_TCP_FUNC;
|
||||
|
||||
/* The MBAP header is already initialized because the caller calls this
|
||||
* function with the buffer returned by the previous call. Therefore we
|
||||
* only have to update the length in the header. Note that the length
|
||||
* header includes the size of the Modbus PDU and the UID Byte. Therefore
|
||||
* the length is usLength plus one.
|
||||
*/
|
||||
pucMBTCPFrame[MB_TCP_LEN] = ( usLength + 1 ) >> 8U;
|
||||
pucMBTCPFrame[MB_TCP_LEN + 1] = ( usLength + 1 ) & 0xFF;
|
||||
if( xMBTCPPortSendResponse( pucMBTCPFrame, usTCPLength ) == FALSE )
|
||||
{
|
||||
eStatus = MB_EIO;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbtcp.h,v 1.2 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_TCP_H
|
||||
#define _MB_TCP_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
#define MB_TCP_PSEUDO_ADDRESS 255
|
||||
|
||||
/* ----------------------- Function prototypes ------------------------------*/
|
||||
eMBErrorCode eMBTCPDoInit( USHORT ucTCPPort );
|
||||
void eMBTCPStart( void );
|
||||
void eMBTCPStop( void );
|
||||
eMBErrorCode eMBTCPReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame,
|
||||
USHORT * pusLength );
|
||||
eMBErrorCode eMBTCPSend( UCHAR _unused, const UCHAR * pucFrame,
|
||||
USHORT usLength );
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
|
@ -1,38 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: port.c,v 1.60 2015/02/01 9:18:05 Armink $
|
||||
*/
|
||||
|
||||
/* ----------------------- System includes --------------------------------*/
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "port.h"
|
||||
/* ----------------------- Variables ----------------------------------------*/
|
||||
static rt_base_t level;
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
void EnterCriticalSection(void)
|
||||
{
|
||||
level = rt_hw_interrupt_disable();
|
||||
}
|
||||
|
||||
void ExitCriticalSection(void)
|
||||
{
|
||||
rt_hw_interrupt_enable(level);
|
||||
}
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: BARE Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: port.h ,v 1.60 2013/08/13 15:07:05 Armink add Master Functions $
|
||||
*/
|
||||
|
||||
#ifndef _PORT_H
|
||||
#define _PORT_H
|
||||
|
||||
#include "mbconfig.h"
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
|
||||
#include <assert.h>
|
||||
#include <inttypes.h>
|
||||
|
||||
#define INLINE
|
||||
#define PR_BEGIN_EXTERN_C extern "C" {
|
||||
#define PR_END_EXTERN_C }
|
||||
|
||||
#define ENTER_CRITICAL_SECTION() EnterCriticalSection()
|
||||
#define EXIT_CRITICAL_SECTION() ExitCriticalSection()
|
||||
|
||||
typedef uint8_t BOOL;
|
||||
|
||||
typedef unsigned char UCHAR;
|
||||
typedef char CHAR;
|
||||
|
||||
typedef uint16_t USHORT;
|
||||
typedef int16_t SHORT;
|
||||
|
||||
typedef uint32_t ULONG;
|
||||
typedef int32_t LONG;
|
||||
|
||||
#ifndef TRUE
|
||||
#define TRUE 1
|
||||
#endif
|
||||
|
||||
#ifndef FALSE
|
||||
#define FALSE 0
|
||||
#endif
|
||||
|
||||
void EnterCriticalSection(void);
|
||||
void ExitCriticalSection(void);
|
||||
|
||||
#endif
|
|
@ -1,68 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: portevent.c,v 1.60 2013/08/13 15:07:05 Armink $
|
||||
*/
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbport.h"
|
||||
|
||||
/* ----------------------- Variables ----------------------------------------*/
|
||||
static struct rt_event xSlaveOsEvent;
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL
|
||||
xMBPortEventInit( void )
|
||||
{
|
||||
rt_event_init(&xSlaveOsEvent,"slave event",RT_IPC_FLAG_PRIO);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBPortEventPost( eMBEventType eEvent )
|
||||
{
|
||||
rt_event_send(&xSlaveOsEvent, eEvent);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBPortEventGet( eMBEventType * eEvent )
|
||||
{
|
||||
rt_uint32_t recvedEvent;
|
||||
/* waiting forever OS event */
|
||||
rt_event_recv(&xSlaveOsEvent,
|
||||
EV_READY | EV_FRAME_RECEIVED | EV_EXECUTE | EV_FRAME_SENT,
|
||||
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, RT_WAITING_FOREVER,
|
||||
&recvedEvent);
|
||||
switch (recvedEvent)
|
||||
{
|
||||
case EV_READY:
|
||||
*eEvent = EV_READY;
|
||||
break;
|
||||
case EV_FRAME_RECEIVED:
|
||||
*eEvent = EV_FRAME_RECEIVED;
|
||||
break;
|
||||
case EV_EXECUTE:
|
||||
*eEvent = EV_EXECUTE;
|
||||
break;
|
||||
case EV_FRAME_SENT:
|
||||
*eEvent = EV_FRAME_SENT;
|
||||
break;
|
||||
}
|
||||
return TRUE;
|
||||
}
|
|
@ -1,239 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: portevent_m.c v 1.60 2013/08/13 15:07:05 Armink add Master Functions$
|
||||
*/
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbport.h"
|
||||
#include "port.h"
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
/* ----------------------- Variables ----------------------------------------*/
|
||||
static struct rt_semaphore xMasterRunRes;
|
||||
static struct rt_event xMasterOsEvent;
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL
|
||||
xMBMasterPortEventInit( void )
|
||||
{
|
||||
rt_event_init(&xMasterOsEvent,"master event",RT_IPC_FLAG_PRIO);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBMasterPortEventPost( eMBMasterEventType eEvent )
|
||||
{
|
||||
rt_event_send(&xMasterOsEvent, eEvent);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL
|
||||
xMBMasterPortEventGet( eMBMasterEventType * eEvent )
|
||||
{
|
||||
rt_uint32_t recvedEvent;
|
||||
/* waiting forever OS event */
|
||||
rt_event_recv(&xMasterOsEvent,
|
||||
EV_MASTER_READY | EV_MASTER_FRAME_RECEIVED | EV_MASTER_EXECUTE |
|
||||
EV_MASTER_FRAME_SENT | EV_MASTER_ERROR_PROCESS,
|
||||
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, RT_WAITING_FOREVER,
|
||||
&recvedEvent);
|
||||
/* the enum type couldn't convert to int type */
|
||||
switch (recvedEvent)
|
||||
{
|
||||
case EV_MASTER_READY:
|
||||
*eEvent = EV_MASTER_READY;
|
||||
break;
|
||||
case EV_MASTER_FRAME_RECEIVED:
|
||||
*eEvent = EV_MASTER_FRAME_RECEIVED;
|
||||
break;
|
||||
case EV_MASTER_EXECUTE:
|
||||
*eEvent = EV_MASTER_EXECUTE;
|
||||
break;
|
||||
case EV_MASTER_FRAME_SENT:
|
||||
*eEvent = EV_MASTER_FRAME_SENT;
|
||||
break;
|
||||
case EV_MASTER_ERROR_PROCESS:
|
||||
*eEvent = EV_MASTER_ERROR_PROCESS;
|
||||
break;
|
||||
}
|
||||
return TRUE;
|
||||
}
|
||||
/**
|
||||
* This function is initialize the OS resource for modbus master.
|
||||
* Note:The resource is define by OS.If you not use OS this function can be empty.
|
||||
*
|
||||
*/
|
||||
void vMBMasterOsResInit( void )
|
||||
{
|
||||
rt_sem_init(&xMasterRunRes, "master res", 0x01 , RT_IPC_FLAG_PRIO);
|
||||
}
|
||||
|
||||
/**
|
||||
* This function is take Mobus Master running resource.
|
||||
* Note:The resource is define by Operating System.If you not use OS this function can be just return TRUE.
|
||||
*
|
||||
* @param lTimeOut the waiting time.
|
||||
*
|
||||
* @return resource taked result
|
||||
*/
|
||||
BOOL xMBMasterRunResTake( LONG lTimeOut )
|
||||
{
|
||||
/*If waiting time is -1 .It will wait forever */
|
||||
return rt_sem_take(&xMasterRunRes, lTimeOut) ? FALSE : TRUE ;
|
||||
}
|
||||
|
||||
/**
|
||||
* This function is release Mobus Master running resource.
|
||||
* Note:The resource is define by Operating System.If you not use OS this function can be empty.
|
||||
*
|
||||
*/
|
||||
void vMBMasterRunResRelease( void )
|
||||
{
|
||||
/* release resource */
|
||||
rt_sem_release(&xMasterRunRes);
|
||||
}
|
||||
|
||||
/**
|
||||
* This is modbus master respond timeout error process callback function.
|
||||
* @note There functions will block modbus master poll while execute OS waiting.
|
||||
* So,for real-time of system.Do not execute too much waiting process.
|
||||
*
|
||||
* @param ucDestAddress destination salve address
|
||||
* @param pucPDUData PDU buffer data
|
||||
* @param ucPDULength PDU buffer length
|
||||
*
|
||||
*/
|
||||
void vMBMasterErrorCBRespondTimeout(UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength) {
|
||||
/**
|
||||
* @note This code is use OS's event mechanism for modbus master protocol stack.
|
||||
* If you don't use OS, you can change it.
|
||||
*/
|
||||
rt_event_send(&xMasterOsEvent, EV_MASTER_ERROR_RESPOND_TIMEOUT);
|
||||
|
||||
/* You can add your code under here. */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* This is modbus master receive data error process callback function.
|
||||
* @note There functions will block modbus master poll while execute OS waiting.
|
||||
* So,for real-time of system.Do not execute too much waiting process.
|
||||
*
|
||||
* @param ucDestAddress destination salve address
|
||||
* @param pucPDUData PDU buffer data
|
||||
* @param ucPDULength PDU buffer length
|
||||
*
|
||||
*/
|
||||
void vMBMasterErrorCBReceiveData(UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength) {
|
||||
/**
|
||||
* @note This code is use OS's event mechanism for modbus master protocol stack.
|
||||
* If you don't use OS, you can change it.
|
||||
*/
|
||||
rt_event_send(&xMasterOsEvent, EV_MASTER_ERROR_RECEIVE_DATA);
|
||||
|
||||
/* You can add your code under here. */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* This is modbus master execute function error process callback function.
|
||||
* @note There functions will block modbus master poll while execute OS waiting.
|
||||
* So,for real-time of system.Do not execute too much waiting process.
|
||||
*
|
||||
* @param ucDestAddress destination salve address
|
||||
* @param pucPDUData PDU buffer data
|
||||
* @param ucPDULength PDU buffer length
|
||||
*
|
||||
*/
|
||||
void vMBMasterErrorCBExecuteFunction(UCHAR ucDestAddress, const UCHAR* pucPDUData,
|
||||
USHORT ucPDULength) {
|
||||
/**
|
||||
* @note This code is use OS's event mechanism for modbus master protocol stack.
|
||||
* If you don't use OS, you can change it.
|
||||
*/
|
||||
rt_event_send(&xMasterOsEvent, EV_MASTER_ERROR_EXECUTE_FUNCTION);
|
||||
|
||||
/* You can add your code under here. */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* This is modbus master request process success callback function.
|
||||
* @note There functions will block modbus master poll while execute OS waiting.
|
||||
* So,for real-time of system.Do not execute too much waiting process.
|
||||
*
|
||||
*/
|
||||
void vMBMasterCBRequestScuuess( void ) {
|
||||
/**
|
||||
* @note This code is use OS's event mechanism for modbus master protocol stack.
|
||||
* If you don't use OS, you can change it.
|
||||
*/
|
||||
rt_event_send(&xMasterOsEvent, EV_MASTER_PROCESS_SUCESS);
|
||||
|
||||
/* You can add your code under here. */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* This function is wait for modbus master request finish and return result.
|
||||
* Waiting result include request process success, request respond timeout,
|
||||
* receive data error and execute function error.You can use the above callback function.
|
||||
* @note If you are use OS, you can use OS's event mechanism. Otherwise you have to run
|
||||
* much user custom delay for waiting.
|
||||
*
|
||||
* @return request error code
|
||||
*/
|
||||
eMBMasterReqErrCode eMBMasterWaitRequestFinish( void ) {
|
||||
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
||||
rt_uint32_t recvedEvent;
|
||||
/* waiting for OS event */
|
||||
rt_event_recv(&xMasterOsEvent,
|
||||
EV_MASTER_PROCESS_SUCESS | EV_MASTER_ERROR_RESPOND_TIMEOUT
|
||||
| EV_MASTER_ERROR_RECEIVE_DATA
|
||||
| EV_MASTER_ERROR_EXECUTE_FUNCTION,
|
||||
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, RT_WAITING_FOREVER,
|
||||
&recvedEvent);
|
||||
switch (recvedEvent)
|
||||
{
|
||||
case EV_MASTER_PROCESS_SUCESS:
|
||||
break;
|
||||
case EV_MASTER_ERROR_RESPOND_TIMEOUT:
|
||||
{
|
||||
eErrStatus = MB_MRE_TIMEDOUT;
|
||||
break;
|
||||
}
|
||||
case EV_MASTER_ERROR_RECEIVE_DATA:
|
||||
{
|
||||
eErrStatus = MB_MRE_REV_DATA;
|
||||
break;
|
||||
}
|
||||
case EV_MASTER_ERROR_EXECUTE_FUNCTION:
|
||||
{
|
||||
eErrStatus = MB_MRE_EXE_FUN;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return eErrStatus;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,225 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: portserial.c,v 1.60 2013/08/13 15:07:05 Armink $
|
||||
*/
|
||||
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbport.h"
|
||||
#include "rtdevice.h"
|
||||
#include "board.h"
|
||||
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
ALIGN(RT_ALIGN_SIZE)
|
||||
/* software simulation serial transmit IRQ handler thread stack */
|
||||
static rt_uint8_t serial_soft_trans_irq_stack[512];
|
||||
/* software simulation serial transmit IRQ handler thread */
|
||||
static struct rt_thread thread_serial_soft_trans_irq;
|
||||
/* serial event */
|
||||
static struct rt_event event_serial;
|
||||
/* modbus slave serial device */
|
||||
static rt_serial_t *serial;
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
/* serial transmit event */
|
||||
#define EVENT_SERIAL_TRANS_START (1<<0)
|
||||
|
||||
/* ----------------------- static functions ---------------------------------*/
|
||||
static void prvvUARTTxReadyISR(void);
|
||||
static void prvvUARTRxISR(void);
|
||||
static rt_err_t serial_rx_ind(rt_device_t dev, rt_size_t size);
|
||||
static void serial_soft_trans_irq(void* parameter);
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL xMBPortSerialInit(UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits,
|
||||
eMBParity eParity)
|
||||
{
|
||||
rt_device_t dev = RT_NULL;
|
||||
char uart_name[20];
|
||||
/**
|
||||
* set 485 mode receive and transmit control IO
|
||||
* @note MODBUS_SLAVE_RT_CONTROL_PIN_INDEX need be defined by user
|
||||
*/
|
||||
#if defined(RT_MODBUS_SLAVE_USE_CONTROL_PIN)
|
||||
rt_pin_mode(MODBUS_SLAVE_RT_CONTROL_PIN_INDEX, PIN_MODE_OUTPUT);
|
||||
#endif
|
||||
/* set serial name */
|
||||
rt_snprintf(uart_name,sizeof(uart_name), "uart%d", ucPORT);
|
||||
|
||||
dev = rt_device_find(uart_name);
|
||||
if(dev == RT_NULL)
|
||||
{
|
||||
/* can not find uart */
|
||||
return FALSE;
|
||||
}
|
||||
else
|
||||
{
|
||||
serial = (struct rt_serial_device*)dev;
|
||||
}
|
||||
|
||||
/* set serial configure parameter */
|
||||
serial->config.baud_rate = ulBaudRate;
|
||||
serial->config.stop_bits = STOP_BITS_1;
|
||||
switch(eParity){
|
||||
case MB_PAR_NONE: {
|
||||
serial->config.data_bits = DATA_BITS_8;
|
||||
serial->config.parity = PARITY_NONE;
|
||||
break;
|
||||
}
|
||||
case MB_PAR_ODD: {
|
||||
serial->config.data_bits = DATA_BITS_9;
|
||||
serial->config.parity = PARITY_ODD;
|
||||
break;
|
||||
}
|
||||
case MB_PAR_EVEN: {
|
||||
serial->config.data_bits = DATA_BITS_9;
|
||||
serial->config.parity = PARITY_EVEN;
|
||||
break;
|
||||
}
|
||||
}
|
||||
/* set serial configure */
|
||||
serial->ops->configure(serial, &(serial->config));
|
||||
|
||||
/* open serial device */
|
||||
if (!rt_device_open(&serial->parent, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX)) {
|
||||
rt_device_set_rx_indicate(&serial->parent, serial_rx_ind);
|
||||
} else {
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
/* software initialize */
|
||||
rt_event_init(&event_serial, "slave event", RT_IPC_FLAG_PRIO);
|
||||
rt_thread_init(&thread_serial_soft_trans_irq,
|
||||
"slave trans",
|
||||
serial_soft_trans_irq,
|
||||
RT_NULL,
|
||||
serial_soft_trans_irq_stack,
|
||||
sizeof(serial_soft_trans_irq_stack),
|
||||
10, 5);
|
||||
rt_thread_startup(&thread_serial_soft_trans_irq);
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
void vMBPortSerialEnable(BOOL xRxEnable, BOOL xTxEnable)
|
||||
{
|
||||
rt_uint32_t recved_event;
|
||||
if (xRxEnable)
|
||||
{
|
||||
/* enable RX interrupt */
|
||||
serial->ops->control(serial, RT_DEVICE_CTRL_SET_INT, (void *)RT_DEVICE_FLAG_INT_RX);
|
||||
/* switch 485 to receive mode */
|
||||
#if defined(RT_MODBUS_SLAVE_USE_CONTROL_PIN)
|
||||
rt_pin_write(MODBUS_SLAVE_RT_CONTROL_PIN_INDEX, PIN_LOW);
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
/* switch 485 to transmit mode */
|
||||
#if defined(RT_MODBUS_SLAVE_USE_CONTROL_PIN)
|
||||
rt_pin_write(MODBUS_SLAVE_RT_CONTROL_PIN_INDEX, PIN_HIGH);
|
||||
#endif
|
||||
/* disable RX interrupt */
|
||||
serial->ops->control(serial, RT_DEVICE_CTRL_CLR_INT, (void *)RT_DEVICE_FLAG_INT_RX);
|
||||
}
|
||||
if (xTxEnable)
|
||||
{
|
||||
/* start serial transmit */
|
||||
rt_event_send(&event_serial, EVENT_SERIAL_TRANS_START);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* stop serial transmit */
|
||||
rt_event_recv(&event_serial, EVENT_SERIAL_TRANS_START,
|
||||
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, 0,
|
||||
&recved_event);
|
||||
}
|
||||
}
|
||||
|
||||
void vMBPortClose(void)
|
||||
{
|
||||
serial->parent.close(&(serial->parent));
|
||||
}
|
||||
|
||||
BOOL xMBPortSerialPutByte(CHAR ucByte)
|
||||
{
|
||||
serial->parent.write(&(serial->parent), 0, &ucByte, 1);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL xMBPortSerialGetByte(CHAR * pucByte)
|
||||
{
|
||||
serial->parent.read(&(serial->parent), 0, pucByte, 1);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
/*
|
||||
* Create an interrupt handler for the transmit buffer empty interrupt
|
||||
* (or an equivalent) for your target processor. This function should then
|
||||
* call pxMBFrameCBTransmitterEmpty( ) which tells the protocol stack that
|
||||
* a new character can be sent. The protocol stack will then call
|
||||
* xMBPortSerialPutByte( ) to send the character.
|
||||
*/
|
||||
void prvvUARTTxReadyISR(void)
|
||||
{
|
||||
pxMBFrameCBTransmitterEmpty();
|
||||
}
|
||||
|
||||
/*
|
||||
* Create an interrupt handler for the receive interrupt for your target
|
||||
* processor. This function should then call pxMBFrameCBByteReceived( ). The
|
||||
* protocol stack will then call xMBPortSerialGetByte( ) to retrieve the
|
||||
* character.
|
||||
*/
|
||||
void prvvUARTRxISR(void)
|
||||
{
|
||||
pxMBFrameCBByteReceived();
|
||||
}
|
||||
|
||||
/**
|
||||
* Software simulation serial transmit IRQ handler.
|
||||
*
|
||||
* @param parameter parameter
|
||||
*/
|
||||
static void serial_soft_trans_irq(void* parameter) {
|
||||
rt_uint32_t recved_event;
|
||||
while (1)
|
||||
{
|
||||
/* waiting for serial transmit start */
|
||||
rt_event_recv(&event_serial, EVENT_SERIAL_TRANS_START, RT_EVENT_FLAG_OR,
|
||||
RT_WAITING_FOREVER, &recved_event);
|
||||
/* execute modbus callback */
|
||||
prvvUARTTxReadyISR();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* This function is serial receive callback function
|
||||
*
|
||||
* @param dev the device of serial
|
||||
* @param size the data size that receive
|
||||
*
|
||||
* @return return RT_EOK
|
||||
*/
|
||||
static rt_err_t serial_rx_ind(rt_device_t dev, rt_size_t size) {
|
||||
prvvUARTRxISR();
|
||||
return RT_EOK;
|
||||
}
|
|
@ -1,229 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: portserial_m.c,v 1.60 2013/08/13 15:07:05 Armink add Master Functions $
|
||||
*/
|
||||
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbport.h"
|
||||
#include "rtdevice.h"
|
||||
#include "board.h"
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
/* ----------------------- Static variables ---------------------------------*/
|
||||
ALIGN(RT_ALIGN_SIZE)
|
||||
/* software simulation serial transmit IRQ handler thread stack */
|
||||
static rt_uint8_t serial_soft_trans_irq_stack[512];
|
||||
/* software simulation serial transmit IRQ handler thread */
|
||||
static struct rt_thread thread_serial_soft_trans_irq;
|
||||
/* serial event */
|
||||
static struct rt_event event_serial;
|
||||
/* modbus master serial device */
|
||||
static rt_serial_t *serial;
|
||||
|
||||
/* ----------------------- Defines ------------------------------------------*/
|
||||
/* serial transmit event */
|
||||
#define EVENT_SERIAL_TRANS_START (1<<0)
|
||||
|
||||
/* ----------------------- static functions ---------------------------------*/
|
||||
static void prvvUARTTxReadyISR(void);
|
||||
static void prvvUARTRxISR(void);
|
||||
static rt_err_t serial_rx_ind(rt_device_t dev, rt_size_t size);
|
||||
static void serial_soft_trans_irq(void* parameter);
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL xMBMasterPortSerialInit(UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits,
|
||||
eMBParity eParity)
|
||||
{
|
||||
rt_device_t dev = RT_NULL;
|
||||
char uart_name[20];
|
||||
|
||||
/**
|
||||
* set 485 mode receive and transmit control IO
|
||||
* @note MODBUS_MASTER_RT_CONTROL_PIN_INDEX need be defined by user
|
||||
*/
|
||||
#if defined(RT_MODBUS_MASTER_USE_CONTROL_PIN)
|
||||
rt_pin_mode(MODBUS_MASTER_RT_CONTROL_PIN_INDEX, PIN_MODE_OUTPUT);
|
||||
#endif
|
||||
/* set serial name */
|
||||
rt_snprintf(uart_name,sizeof(uart_name), "uart%d", ucPORT);
|
||||
|
||||
dev = rt_device_find(uart_name);
|
||||
if(dev == RT_NULL)
|
||||
{
|
||||
/* can not find uart */
|
||||
return FALSE;
|
||||
}
|
||||
else
|
||||
{
|
||||
serial = (struct rt_serial_device*)dev;
|
||||
}
|
||||
|
||||
/* set serial configure parameter */
|
||||
serial->config.baud_rate = ulBaudRate;
|
||||
serial->config.stop_bits = STOP_BITS_1;
|
||||
switch(eParity){
|
||||
case MB_PAR_NONE: {
|
||||
serial->config.data_bits = DATA_BITS_8;
|
||||
serial->config.parity = PARITY_NONE;
|
||||
break;
|
||||
}
|
||||
case MB_PAR_ODD: {
|
||||
serial->config.data_bits = DATA_BITS_9;
|
||||
serial->config.parity = PARITY_ODD;
|
||||
break;
|
||||
}
|
||||
case MB_PAR_EVEN: {
|
||||
serial->config.data_bits = DATA_BITS_9;
|
||||
serial->config.parity = PARITY_EVEN;
|
||||
break;
|
||||
}
|
||||
}
|
||||
/* set serial configure */
|
||||
serial->ops->configure(serial, &(serial->config));
|
||||
|
||||
/* open serial device */
|
||||
if (!rt_device_open(&serial->parent, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX)) {
|
||||
rt_device_set_rx_indicate(&serial->parent, serial_rx_ind);
|
||||
} else {
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
/* software initialize */
|
||||
rt_event_init(&event_serial, "master event", RT_IPC_FLAG_PRIO);
|
||||
rt_thread_init(&thread_serial_soft_trans_irq,
|
||||
"master trans",
|
||||
serial_soft_trans_irq,
|
||||
RT_NULL,
|
||||
serial_soft_trans_irq_stack,
|
||||
sizeof(serial_soft_trans_irq_stack),
|
||||
10, 5);
|
||||
rt_thread_startup(&thread_serial_soft_trans_irq);
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
void vMBMasterPortSerialEnable(BOOL xRxEnable, BOOL xTxEnable)
|
||||
{
|
||||
rt_uint32_t recved_event;
|
||||
if (xRxEnable)
|
||||
{
|
||||
/* enable RX interrupt */
|
||||
serial->ops->control(serial, RT_DEVICE_CTRL_SET_INT, (void *)RT_DEVICE_FLAG_INT_RX);
|
||||
/* switch 485 to receive mode */
|
||||
#if defined(RT_MODBUS_MASTER_USE_CONTROL_PIN)
|
||||
rt_pin_write(MODBUS_MASTER_RT_CONTROL_PIN_INDEX, PIN_LOW);
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
/* switch 485 to transmit mode */
|
||||
#if defined(RT_MODBUS_MASTER_USE_CONTROL_PIN)
|
||||
rt_pin_write(MODBUS_MASTER_RT_CONTROL_PIN_INDEX, PIN_HIGH);
|
||||
#endif
|
||||
/* disable RX interrupt */
|
||||
serial->ops->control(serial, RT_DEVICE_CTRL_CLR_INT, (void *)RT_DEVICE_FLAG_INT_RX);
|
||||
}
|
||||
if (xTxEnable)
|
||||
{
|
||||
/* start serial transmit */
|
||||
rt_event_send(&event_serial, EVENT_SERIAL_TRANS_START);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* stop serial transmit */
|
||||
rt_event_recv(&event_serial, EVENT_SERIAL_TRANS_START,
|
||||
RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR, 0,
|
||||
&recved_event);
|
||||
}
|
||||
}
|
||||
|
||||
void vMBMasterPortClose(void)
|
||||
{
|
||||
serial->parent.close(&(serial->parent));
|
||||
}
|
||||
|
||||
BOOL xMBMasterPortSerialPutByte(CHAR ucByte)
|
||||
{
|
||||
serial->parent.write(&(serial->parent), 0, &ucByte, 1);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
BOOL xMBMasterPortSerialGetByte(CHAR * pucByte)
|
||||
{
|
||||
serial->parent.read(&(serial->parent), 0, pucByte, 1);
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
/*
|
||||
* Create an interrupt handler for the transmit buffer empty interrupt
|
||||
* (or an equivalent) for your target processor. This function should then
|
||||
* call pxMBFrameCBTransmitterEmpty( ) which tells the protocol stack that
|
||||
* a new character can be sent. The protocol stack will then call
|
||||
* xMBPortSerialPutByte( ) to send the character.
|
||||
*/
|
||||
void prvvUARTTxReadyISR(void)
|
||||
{
|
||||
pxMBMasterFrameCBTransmitterEmpty();
|
||||
}
|
||||
|
||||
/*
|
||||
* Create an interrupt handler for the receive interrupt for your target
|
||||
* processor. This function should then call pxMBFrameCBByteReceived( ). The
|
||||
* protocol stack will then call xMBPortSerialGetByte( ) to retrieve the
|
||||
* character.
|
||||
*/
|
||||
void prvvUARTRxISR(void)
|
||||
{
|
||||
pxMBMasterFrameCBByteReceived();
|
||||
}
|
||||
|
||||
/**
|
||||
* Software simulation serial transmit IRQ handler.
|
||||
*
|
||||
* @param parameter parameter
|
||||
*/
|
||||
static void serial_soft_trans_irq(void* parameter) {
|
||||
rt_uint32_t recved_event;
|
||||
while (1)
|
||||
{
|
||||
/* waiting for serial transmit start */
|
||||
rt_event_recv(&event_serial, EVENT_SERIAL_TRANS_START, RT_EVENT_FLAG_OR,
|
||||
RT_WAITING_FOREVER, &recved_event);
|
||||
/* execute modbus callback */
|
||||
prvvUARTTxReadyISR();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* This function is serial receive callback function
|
||||
*
|
||||
* @param dev the device of serial
|
||||
* @param size the data size that receive
|
||||
*
|
||||
* @return return RT_EOK
|
||||
*/
|
||||
static rt_err_t serial_rx_ind(rt_device_t dev, rt_size_t size) {
|
||||
prvvUARTRxISR();
|
||||
return RT_EOK;
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,63 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: porttimer.c,v 1.60 2013/08/13 15:07:05 Armink $
|
||||
*/
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mbport.h"
|
||||
|
||||
/* ----------------------- static functions ---------------------------------*/
|
||||
static struct rt_timer timer;
|
||||
static void prvvTIMERExpiredISR(void);
|
||||
static void timer_timeout_ind(void* parameter);
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL xMBPortTimersInit(USHORT usTim1Timerout50us)
|
||||
{
|
||||
rt_timer_init(&timer, "slave timer",
|
||||
timer_timeout_ind, /* bind timeout callback function */
|
||||
RT_NULL,
|
||||
(50 * usTim1Timerout50us) / (1000 * 1000 / RT_TICK_PER_SECOND) + 1,
|
||||
RT_TIMER_FLAG_ONE_SHOT); /* one shot */
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
void vMBPortTimersEnable()
|
||||
{
|
||||
rt_timer_start(&timer);
|
||||
}
|
||||
|
||||
void vMBPortTimersDisable()
|
||||
{
|
||||
rt_timer_stop(&timer);
|
||||
}
|
||||
|
||||
void prvvTIMERExpiredISR(void)
|
||||
{
|
||||
(void) pxMBPortCBTimerExpired();
|
||||
}
|
||||
|
||||
static void timer_timeout_ind(void* parameter)
|
||||
{
|
||||
prvvTIMERExpiredISR();
|
||||
}
|
|
@ -1,107 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: RT-Thread Port
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: porttimer_m.c,v 1.60 2013/08/13 15:07:05 Armink add Master Functions$
|
||||
*/
|
||||
|
||||
/* ----------------------- Platform includes --------------------------------*/
|
||||
#include "port.h"
|
||||
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbport.h"
|
||||
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
/* ----------------------- Variables ----------------------------------------*/
|
||||
static USHORT usT35TimeOut50us;
|
||||
static struct rt_timer timer;
|
||||
static void prvvTIMERExpiredISR(void);
|
||||
static void timer_timeout_ind(void* parameter);
|
||||
|
||||
/* ----------------------- static functions ---------------------------------*/
|
||||
static void prvvTIMERExpiredISR(void);
|
||||
|
||||
/* ----------------------- Start implementation -----------------------------*/
|
||||
BOOL xMBMasterPortTimersInit(USHORT usTimeOut50us)
|
||||
{
|
||||
/* backup T35 ticks */
|
||||
usT35TimeOut50us = usTimeOut50us;
|
||||
|
||||
rt_timer_init(&timer, "master timer",
|
||||
timer_timeout_ind, /* bind timeout callback function */
|
||||
RT_NULL,
|
||||
(50 * usT35TimeOut50us) / (1000 * 1000 / RT_TICK_PER_SECOND) + 1,
|
||||
RT_TIMER_FLAG_ONE_SHOT); /* one shot */
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
void vMBMasterPortTimersT35Enable()
|
||||
{
|
||||
rt_tick_t timer_tick = (50 * usT35TimeOut50us)
|
||||
/ (1000 * 1000 / RT_TICK_PER_SECOND);
|
||||
|
||||
/* Set current timer mode, don't change it.*/
|
||||
vMBMasterSetCurTimerMode(MB_TMODE_T35);
|
||||
|
||||
rt_timer_control(&timer, RT_TIMER_CTRL_SET_TIME, &timer_tick);
|
||||
|
||||
rt_timer_start(&timer);
|
||||
}
|
||||
|
||||
void vMBMasterPortTimersConvertDelayEnable()
|
||||
{
|
||||
rt_tick_t timer_tick = MB_MASTER_DELAY_MS_CONVERT * RT_TICK_PER_SECOND / 1000;
|
||||
|
||||
/* Set current timer mode, don't change it.*/
|
||||
vMBMasterSetCurTimerMode(MB_TMODE_CONVERT_DELAY);
|
||||
|
||||
rt_timer_control(&timer, RT_TIMER_CTRL_SET_TIME, &timer_tick);
|
||||
|
||||
rt_timer_start(&timer);
|
||||
}
|
||||
|
||||
void vMBMasterPortTimersRespondTimeoutEnable()
|
||||
{
|
||||
rt_tick_t timer_tick = MB_MASTER_TIMEOUT_MS_RESPOND * RT_TICK_PER_SECOND / 1000;
|
||||
|
||||
/* Set current timer mode, don't change it.*/
|
||||
vMBMasterSetCurTimerMode(MB_TMODE_RESPOND_TIMEOUT);
|
||||
|
||||
rt_timer_control(&timer, RT_TIMER_CTRL_SET_TIME, &timer_tick);
|
||||
|
||||
rt_timer_start(&timer);
|
||||
}
|
||||
|
||||
void vMBMasterPortTimersDisable()
|
||||
{
|
||||
rt_timer_stop(&timer);
|
||||
}
|
||||
|
||||
void prvvTIMERExpiredISR(void)
|
||||
{
|
||||
(void) pxMBMasterPortCBTimerExpired();
|
||||
}
|
||||
|
||||
static void timer_timeout_ind(void* parameter)
|
||||
{
|
||||
prvvTIMERExpiredISR();
|
||||
}
|
||||
|
||||
#endif
|
|
@ -1,286 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: user callback functions and buffer define in slave mode
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: user_mb_app.c,v 1.60 2013/11/23 11:49:05 Armink $
|
||||
*/
|
||||
#include "user_mb_app.h"
|
||||
|
||||
/*------------------------Slave mode use these variables----------------------*/
|
||||
//Slave mode:DiscreteInputs variables
|
||||
USHORT usSDiscInStart = S_DISCRETE_INPUT_START;
|
||||
#if S_DISCRETE_INPUT_NDISCRETES%8
|
||||
UCHAR ucSDiscInBuf[S_DISCRETE_INPUT_NDISCRETES/8+1];
|
||||
#else
|
||||
UCHAR ucSDiscInBuf[S_DISCRETE_INPUT_NDISCRETES/8] ;
|
||||
#endif
|
||||
//Slave mode:Coils variables
|
||||
USHORT usSCoilStart = S_COIL_START;
|
||||
#if S_COIL_NCOILS%8
|
||||
UCHAR ucSCoilBuf[S_COIL_NCOILS/8+1] ;
|
||||
#else
|
||||
UCHAR ucSCoilBuf[S_COIL_NCOILS/8] ;
|
||||
#endif
|
||||
//Slave mode:InputRegister variables
|
||||
USHORT usSRegInStart = S_REG_INPUT_START;
|
||||
USHORT usSRegInBuf[S_REG_INPUT_NREGS] ;
|
||||
//Slave mode:HoldingRegister variables
|
||||
USHORT usSRegHoldStart = S_REG_HOLDING_START;
|
||||
USHORT usSRegHoldBuf[S_REG_HOLDING_NREGS] ;
|
||||
|
||||
/**
|
||||
* Modbus slave input register callback function.
|
||||
*
|
||||
* @param pucRegBuffer input register buffer
|
||||
* @param usAddress input register address
|
||||
* @param usNRegs input register number
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBRegInputCB(UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNRegs )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex;
|
||||
USHORT * pusRegInputBuf;
|
||||
USHORT REG_INPUT_START;
|
||||
USHORT REG_INPUT_NREGS;
|
||||
USHORT usRegInStart;
|
||||
|
||||
pusRegInputBuf = usSRegInBuf;
|
||||
REG_INPUT_START = S_REG_INPUT_START;
|
||||
REG_INPUT_NREGS = S_REG_INPUT_NREGS;
|
||||
usRegInStart = usSRegInStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= REG_INPUT_START)
|
||||
&& (usAddress + usNRegs <= REG_INPUT_START + REG_INPUT_NREGS))
|
||||
{
|
||||
iRegIndex = usAddress - usRegInStart;
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegInputBuf[iRegIndex] >> 8);
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegInputBuf[iRegIndex] & 0xFF);
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus slave holding register callback function.
|
||||
*
|
||||
* @param pucRegBuffer holding register buffer
|
||||
* @param usAddress holding register address
|
||||
* @param usNRegs holding register number
|
||||
* @param eMode read or write
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBRegHoldingCB(UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs, eMBRegisterMode eMode)
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex;
|
||||
USHORT * pusRegHoldingBuf;
|
||||
USHORT REG_HOLDING_START;
|
||||
USHORT REG_HOLDING_NREGS;
|
||||
USHORT usRegHoldStart;
|
||||
|
||||
pusRegHoldingBuf = usSRegHoldBuf;
|
||||
REG_HOLDING_START = S_REG_HOLDING_START;
|
||||
REG_HOLDING_NREGS = S_REG_HOLDING_NREGS;
|
||||
usRegHoldStart = usSRegHoldStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= REG_HOLDING_START)
|
||||
&& (usAddress + usNRegs <= REG_HOLDING_START + REG_HOLDING_NREGS))
|
||||
{
|
||||
iRegIndex = usAddress - usRegHoldStart;
|
||||
switch (eMode)
|
||||
{
|
||||
/* read current register values from the protocol stack. */
|
||||
case MB_REG_READ:
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegHoldingBuf[iRegIndex] >> 8);
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegHoldingBuf[iRegIndex] & 0xFF);
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
break;
|
||||
|
||||
/* write current register values with new values from the protocol stack. */
|
||||
case MB_REG_WRITE:
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
pusRegHoldingBuf[iRegIndex] = *pucRegBuffer++ << 8;
|
||||
pusRegHoldingBuf[iRegIndex] |= *pucRegBuffer++;
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus slave coils callback function.
|
||||
*
|
||||
* @param pucRegBuffer coils buffer
|
||||
* @param usAddress coils address
|
||||
* @param usNCoils coils number
|
||||
* @param eMode read or write
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBRegCoilsCB(UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNCoils, eMBRegisterMode eMode)
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex , iRegBitIndex , iNReg;
|
||||
UCHAR * pucCoilBuf;
|
||||
USHORT COIL_START;
|
||||
USHORT COIL_NCOILS;
|
||||
USHORT usCoilStart;
|
||||
iNReg = usNCoils / 8 + 1;
|
||||
|
||||
pucCoilBuf = ucSCoilBuf;
|
||||
COIL_START = S_COIL_START;
|
||||
COIL_NCOILS = S_COIL_NCOILS;
|
||||
usCoilStart = usSCoilStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if( ( usAddress >= COIL_START ) &&
|
||||
( usAddress + usNCoils <= COIL_START + COIL_NCOILS ) )
|
||||
{
|
||||
iRegIndex = (USHORT) (usAddress - usCoilStart) / 8;
|
||||
iRegBitIndex = (USHORT) (usAddress - usCoilStart) % 8;
|
||||
switch ( eMode )
|
||||
{
|
||||
/* read current coil values from the protocol stack. */
|
||||
case MB_REG_READ:
|
||||
while (iNReg > 0)
|
||||
{
|
||||
*pucRegBuffer++ = xMBUtilGetBits(&pucCoilBuf[iRegIndex++],
|
||||
iRegBitIndex, 8);
|
||||
iNReg--;
|
||||
}
|
||||
pucRegBuffer--;
|
||||
/* last coils */
|
||||
usNCoils = usNCoils % 8;
|
||||
/* filling zero to high bit */
|
||||
*pucRegBuffer = *pucRegBuffer << (8 - usNCoils);
|
||||
*pucRegBuffer = *pucRegBuffer >> (8 - usNCoils);
|
||||
break;
|
||||
|
||||
/* write current coil values with new values from the protocol stack. */
|
||||
case MB_REG_WRITE:
|
||||
while (iNReg > 1)
|
||||
{
|
||||
xMBUtilSetBits(&pucCoilBuf[iRegIndex++], iRegBitIndex, 8,
|
||||
*pucRegBuffer++);
|
||||
iNReg--;
|
||||
}
|
||||
/* last coils */
|
||||
usNCoils = usNCoils % 8;
|
||||
/* xMBUtilSetBits has bug when ucNBits is zero */
|
||||
if (usNCoils != 0)
|
||||
{
|
||||
xMBUtilSetBits(&pucCoilBuf[iRegIndex++], iRegBitIndex, usNCoils,
|
||||
*pucRegBuffer++);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus slave discrete callback function.
|
||||
*
|
||||
* @param pucRegBuffer discrete buffer
|
||||
* @param usAddress discrete address
|
||||
* @param usNDiscrete discrete number
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNDiscrete )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex , iRegBitIndex , iNReg;
|
||||
UCHAR * pucDiscreteInputBuf;
|
||||
USHORT DISCRETE_INPUT_START;
|
||||
USHORT DISCRETE_INPUT_NDISCRETES;
|
||||
USHORT usDiscreteInputStart;
|
||||
iNReg = usNDiscrete / 8 + 1;
|
||||
|
||||
pucDiscreteInputBuf = ucSDiscInBuf;
|
||||
DISCRETE_INPUT_START = S_DISCRETE_INPUT_START;
|
||||
DISCRETE_INPUT_NDISCRETES = S_DISCRETE_INPUT_NDISCRETES;
|
||||
usDiscreteInputStart = usSDiscInStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= DISCRETE_INPUT_START)
|
||||
&& (usAddress + usNDiscrete <= DISCRETE_INPUT_START + DISCRETE_INPUT_NDISCRETES))
|
||||
{
|
||||
iRegIndex = (USHORT) (usAddress - usDiscreteInputStart) / 8;
|
||||
iRegBitIndex = (USHORT) (usAddress - usDiscreteInputStart) % 8;
|
||||
|
||||
while (iNReg > 0)
|
||||
{
|
||||
*pucRegBuffer++ = xMBUtilGetBits(&pucDiscreteInputBuf[iRegIndex++],
|
||||
iRegBitIndex, 8);
|
||||
iNReg--;
|
||||
}
|
||||
pucRegBuffer--;
|
||||
/* last discrete */
|
||||
usNDiscrete = usNDiscrete % 8;
|
||||
/* filling zero to high bit */
|
||||
*pucRegBuffer = *pucRegBuffer << (8 - usNDiscrete);
|
||||
*pucRegBuffer = *pucRegBuffer >> (8 - usNDiscrete);
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
#ifndef USER_APP
|
||||
#define USER_APP
|
||||
/* ----------------------- Modbus includes ----------------------------------*/
|
||||
#include "mb.h"
|
||||
#include "mb_m.h"
|
||||
#include "mbconfig.h"
|
||||
#include "mbframe.h"
|
||||
#include "mbutils.h"
|
||||
|
||||
/* -----------------------Slave Defines -------------------------------------*/
|
||||
#define S_DISCRETE_INPUT_START 0
|
||||
#define S_DISCRETE_INPUT_NDISCRETES 16
|
||||
#define S_COIL_START 0
|
||||
#define S_COIL_NCOILS 64
|
||||
#define S_REG_INPUT_START 0
|
||||
#define S_REG_INPUT_NREGS 100
|
||||
#define S_REG_HOLDING_START 0
|
||||
#define S_REG_HOLDING_NREGS 100
|
||||
/* salve mode: holding register's all address */
|
||||
#define S_HD_RESERVE 0
|
||||
/* salve mode: input register's all address */
|
||||
#define S_IN_RESERVE 0
|
||||
/* salve mode: coil's all address */
|
||||
#define S_CO_RESERVE 0
|
||||
/* salve mode: discrete's all address */
|
||||
#define S_DI_RESERVE 0
|
||||
|
||||
/* -----------------------Master Defines -------------------------------------*/
|
||||
#define M_DISCRETE_INPUT_START 0
|
||||
#define M_DISCRETE_INPUT_NDISCRETES 16
|
||||
#define M_COIL_START 0
|
||||
#define M_COIL_NCOILS 64
|
||||
#define M_REG_INPUT_START 0
|
||||
#define M_REG_INPUT_NREGS 100
|
||||
#define M_REG_HOLDING_START 0
|
||||
#define M_REG_HOLDING_NREGS 100
|
||||
/* master mode: holding register's all address */
|
||||
#define M_HD_RESERVE 0
|
||||
/* master mode: input register's all address */
|
||||
#define M_IN_RESERVE 0
|
||||
/* master mode: coil's all address */
|
||||
#define M_CO_RESERVE 0
|
||||
/* master mode: discrete's all address */
|
||||
#define M_DI_RESERVE 0
|
||||
|
||||
#endif
|
|
@ -1,294 +0,0 @@
|
|||
/*
|
||||
* FreeModbus Libary: user callback functions and buffer define in master mode
|
||||
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*
|
||||
* File: $Id: user_mb_app_m.c,v 1.60 2013/11/23 11:49:05 Armink $
|
||||
*/
|
||||
#include "user_mb_app.h"
|
||||
|
||||
/*-----------------------Master mode use these variables----------------------*/
|
||||
#if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
||||
//Master mode:DiscreteInputs variables
|
||||
USHORT usMDiscInStart = M_DISCRETE_INPUT_START;
|
||||
#if M_DISCRETE_INPUT_NDISCRETES%8
|
||||
UCHAR ucMDiscInBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_DISCRETE_INPUT_NDISCRETES/8+1];
|
||||
#else
|
||||
UCHAR ucMDiscInBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_DISCRETE_INPUT_NDISCRETES/8];
|
||||
#endif
|
||||
//Master mode:Coils variables
|
||||
USHORT usMCoilStart = M_COIL_START;
|
||||
#if M_COIL_NCOILS%8
|
||||
UCHAR ucMCoilBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_COIL_NCOILS/8+1];
|
||||
#else
|
||||
UCHAR ucMCoilBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_COIL_NCOILS/8];
|
||||
#endif
|
||||
//Master mode:InputRegister variables
|
||||
USHORT usMRegInStart = M_REG_INPUT_START;
|
||||
USHORT usMRegInBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_REG_INPUT_NREGS];
|
||||
//Master mode:HoldingRegister variables
|
||||
USHORT usMRegHoldStart = M_REG_HOLDING_START;
|
||||
USHORT usMRegHoldBuf[MB_MASTER_TOTAL_SLAVE_NUM][M_REG_HOLDING_NREGS];
|
||||
|
||||
/**
|
||||
* Modbus master input register callback function.
|
||||
*
|
||||
* @param pucRegBuffer input register buffer
|
||||
* @param usAddress input register address
|
||||
* @param usNRegs input register number
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNRegs )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex;
|
||||
USHORT * pusRegInputBuf;
|
||||
USHORT REG_INPUT_START;
|
||||
USHORT REG_INPUT_NREGS;
|
||||
USHORT usRegInStart;
|
||||
|
||||
pusRegInputBuf = usMRegInBuf[ucMBMasterGetDestAddress() - 1];
|
||||
REG_INPUT_START = M_REG_INPUT_START;
|
||||
REG_INPUT_NREGS = M_REG_INPUT_NREGS;
|
||||
usRegInStart = usMRegInStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= REG_INPUT_START)
|
||||
&& (usAddress + usNRegs <= REG_INPUT_START + REG_INPUT_NREGS))
|
||||
{
|
||||
iRegIndex = usAddress - usRegInStart;
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
pusRegInputBuf[iRegIndex] = *pucRegBuffer++ << 8;
|
||||
pusRegInputBuf[iRegIndex] |= *pucRegBuffer++;
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus master holding register callback function.
|
||||
*
|
||||
* @param pucRegBuffer holding register buffer
|
||||
* @param usAddress holding register address
|
||||
* @param usNRegs holding register number
|
||||
* @param eMode read or write
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegHoldingCB(UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNRegs, eMBRegisterMode eMode)
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex;
|
||||
USHORT * pusRegHoldingBuf;
|
||||
USHORT REG_HOLDING_START;
|
||||
USHORT REG_HOLDING_NREGS;
|
||||
USHORT usRegHoldStart;
|
||||
|
||||
pusRegHoldingBuf = usMRegHoldBuf[ucMBMasterGetDestAddress() - 1];
|
||||
REG_HOLDING_START = M_REG_HOLDING_START;
|
||||
REG_HOLDING_NREGS = M_REG_HOLDING_NREGS;
|
||||
usRegHoldStart = usMRegHoldStart;
|
||||
/* if mode is read, the master will write the received date to buffer. */
|
||||
eMode = MB_REG_WRITE;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= REG_HOLDING_START)
|
||||
&& (usAddress + usNRegs <= REG_HOLDING_START + REG_HOLDING_NREGS))
|
||||
{
|
||||
iRegIndex = usAddress - usRegHoldStart;
|
||||
switch (eMode)
|
||||
{
|
||||
/* read current register values from the protocol stack. */
|
||||
case MB_REG_READ:
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegHoldingBuf[iRegIndex] >> 8);
|
||||
*pucRegBuffer++ = (UCHAR) (pusRegHoldingBuf[iRegIndex] & 0xFF);
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
break;
|
||||
/* write current register values with new values from the protocol stack. */
|
||||
case MB_REG_WRITE:
|
||||
while (usNRegs > 0)
|
||||
{
|
||||
pusRegHoldingBuf[iRegIndex] = *pucRegBuffer++ << 8;
|
||||
pusRegHoldingBuf[iRegIndex] |= *pucRegBuffer++;
|
||||
iRegIndex++;
|
||||
usNRegs--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus master coils callback function.
|
||||
*
|
||||
* @param pucRegBuffer coils buffer
|
||||
* @param usAddress coils address
|
||||
* @param usNCoils coils number
|
||||
* @param eMode read or write
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegCoilsCB(UCHAR * pucRegBuffer, USHORT usAddress,
|
||||
USHORT usNCoils, eMBRegisterMode eMode)
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex , iRegBitIndex , iNReg;
|
||||
UCHAR * pucCoilBuf;
|
||||
USHORT COIL_START;
|
||||
USHORT COIL_NCOILS;
|
||||
USHORT usCoilStart;
|
||||
iNReg = usNCoils / 8 + 1;
|
||||
|
||||
pucCoilBuf = ucMCoilBuf[ucMBMasterGetDestAddress() - 1];
|
||||
COIL_START = M_COIL_START;
|
||||
COIL_NCOILS = M_COIL_NCOILS;
|
||||
usCoilStart = usMCoilStart;
|
||||
|
||||
/* if mode is read,the master will write the received date to buffer. */
|
||||
eMode = MB_REG_WRITE;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= COIL_START)
|
||||
&& (usAddress + usNCoils <= COIL_START + COIL_NCOILS))
|
||||
{
|
||||
iRegIndex = (USHORT) (usAddress - usCoilStart) / 8;
|
||||
iRegBitIndex = (USHORT) (usAddress - usCoilStart) % 8;
|
||||
switch (eMode)
|
||||
{
|
||||
/* read current coil values from the protocol stack. */
|
||||
case MB_REG_READ:
|
||||
while (iNReg > 0)
|
||||
{
|
||||
*pucRegBuffer++ = xMBUtilGetBits(&pucCoilBuf[iRegIndex++],
|
||||
iRegBitIndex, 8);
|
||||
iNReg--;
|
||||
}
|
||||
pucRegBuffer--;
|
||||
/* last coils */
|
||||
usNCoils = usNCoils % 8;
|
||||
/* filling zero to high bit */
|
||||
*pucRegBuffer = *pucRegBuffer << (8 - usNCoils);
|
||||
*pucRegBuffer = *pucRegBuffer >> (8 - usNCoils);
|
||||
break;
|
||||
|
||||
/* write current coil values with new values from the protocol stack. */
|
||||
case MB_REG_WRITE:
|
||||
while (iNReg > 1)
|
||||
{
|
||||
xMBUtilSetBits(&pucCoilBuf[iRegIndex++], iRegBitIndex, 8,
|
||||
*pucRegBuffer++);
|
||||
iNReg--;
|
||||
}
|
||||
/* last coils */
|
||||
usNCoils = usNCoils % 8;
|
||||
/* xMBUtilSetBits has bug when ucNBits is zero */
|
||||
if (usNCoils != 0)
|
||||
{
|
||||
xMBUtilSetBits(&pucCoilBuf[iRegIndex++], iRegBitIndex, usNCoils,
|
||||
*pucRegBuffer++);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
return eStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* Modbus master discrete callback function.
|
||||
*
|
||||
* @param pucRegBuffer discrete buffer
|
||||
* @param usAddress discrete address
|
||||
* @param usNDiscrete discrete number
|
||||
*
|
||||
* @return result
|
||||
*/
|
||||
eMBErrorCode eMBMasterRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNDiscrete )
|
||||
{
|
||||
eMBErrorCode eStatus = MB_ENOERR;
|
||||
USHORT iRegIndex , iRegBitIndex , iNReg;
|
||||
UCHAR * pucDiscreteInputBuf;
|
||||
USHORT DISCRETE_INPUT_START;
|
||||
USHORT DISCRETE_INPUT_NDISCRETES;
|
||||
USHORT usDiscreteInputStart;
|
||||
iNReg = usNDiscrete / 8 + 1;
|
||||
|
||||
pucDiscreteInputBuf = ucMDiscInBuf[ucMBMasterGetDestAddress() - 1];
|
||||
DISCRETE_INPUT_START = M_DISCRETE_INPUT_START;
|
||||
DISCRETE_INPUT_NDISCRETES = M_DISCRETE_INPUT_NDISCRETES;
|
||||
usDiscreteInputStart = usMDiscInStart;
|
||||
|
||||
/* it already plus one in modbus function method. */
|
||||
usAddress--;
|
||||
|
||||
if ((usAddress >= DISCRETE_INPUT_START)
|
||||
&& (usAddress + usNDiscrete <= DISCRETE_INPUT_START + DISCRETE_INPUT_NDISCRETES))
|
||||
{
|
||||
iRegIndex = (USHORT) (usAddress - usDiscreteInputStart) / 8;
|
||||
iRegBitIndex = (USHORT) (usAddress - usDiscreteInputStart) % 8;
|
||||
|
||||
/* write current discrete values with new values from the protocol stack. */
|
||||
while (iNReg > 1)
|
||||
{
|
||||
xMBUtilSetBits(&pucDiscreteInputBuf[iRegIndex++], iRegBitIndex, 8,
|
||||
*pucRegBuffer++);
|
||||
iNReg--;
|
||||
}
|
||||
/* last discrete */
|
||||
usNDiscrete = usNDiscrete % 8;
|
||||
/* xMBUtilSetBits has bug when ucNBits is zero */
|
||||
if (usNDiscrete != 0)
|
||||
{
|
||||
xMBUtilSetBits(&pucDiscreteInputBuf[iRegIndex++], iRegBitIndex,
|
||||
usNDiscrete, *pucRegBuffer++);
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
eStatus = MB_ENOREG;
|
||||
}
|
||||
|
||||
return eStatus;
|
||||
}
|
||||
#endif
|
Loading…
Reference in New Issue