[bsp][amebaz]支持IAR工程及smartconfig配网
This commit is contained in:
tyx
parent
fbaa86933d
commit
135ec47a6a
|
|
@ -19,7 +19,7 @@ CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
|
|||
CONFIG_IDLE_THREAD_STACK_SIZE=256
|
||||
CONFIG_RT_USING_TIMER_SOFT=y
|
||||
CONFIG_RT_TIMER_THREAD_PRIO=4
|
||||
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
|
||||
CONFIG_RT_TIMER_THREAD_STACK_SIZE=1024
|
||||
CONFIG_RT_DEBUG=y
|
||||
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
|
||||
|
|
@ -229,7 +229,10 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
|
|||
# AT commands
|
||||
#
|
||||
# CONFIG_RT_USING_AT is not set
|
||||
# CONFIG_LWIP_USING_DHCPD is not set
|
||||
CONFIG_LWIP_USING_DHCPD=y
|
||||
CONFIG_DHCPD_SERVER_IP="192.168.169.1"
|
||||
CONFIG_DHCPD_USING_ROUTER=y
|
||||
# CONFIG_LWIP_USING_CUSTOMER_DNS_SERVER is not set
|
||||
|
||||
#
|
||||
# VBUS(Virtual Software BUS)
|
||||
|
|
@ -408,5 +411,10 @@ CONFIG_PKG_REALTEK_AMEBA_VER="latest"
|
|||
# CONFIG_SYS_AUTO_UPDATE_PKGS is not set
|
||||
# CONFIG_SYS_CREATE_MDK_IAR_PROJECT is not set
|
||||
# CONFIG_SYS_PKGS_DOWNLOAD_ACCELERATE is not set
|
||||
|
||||
#
|
||||
# External Libraries
|
||||
#
|
||||
CONFIG_RT_USING_SMARTCONFIG_LIB=y
|
||||
# CONFIG_BSP_USING_UART0 is not set
|
||||
CONFIG_BSP_USING_WIFI=y
|
||||
|
|
|
|||
|
|
@ -26,6 +26,7 @@ config $ENV_DIR
|
|||
source "$RTT_DIR/Kconfig"
|
||||
source "$PKGS_DIR/Kconfig"
|
||||
source "$ENV_DIR/tools/scripts/cmds/Kconfig"
|
||||
source "$BSP_DIR/libraries/Kconfig"
|
||||
source "$BSP_DIR/drivers/Kconfig"
|
||||
|
||||
select PKG_USING_REALTEK_AMEBA
|
||||
|
|
|
|||
|
|
@ -1,9 +1,8 @@
|
|||
# amebaz on RT-Thread
|
||||
|
||||
## 1. 简介
|
||||
## 1 简介
|
||||
|
||||
amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|
||||
包括如下硬件特性：
|
||||
amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片，属于rtl8710b系列。硬件特性如下：
|
||||
|
||||
| 硬件 | 描述 |
|
||||
| -- | -- |
|
||||
|
|
@ -11,8 +10,7 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|
|||
|CPU| Cortex-M4 |
|
||||
|主频| 125MHz |
|
||||
|
||||
## 2. 编译说明
|
||||
|
||||
## 2 编译说明
|
||||
|
||||
| 环境 | 说明 |
|
||||
| ------------ | ------------------------------------------------------------ |
|
||||
|
|
@ -21,15 +19,33 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|
|||
| 构建工具 | scons |
|
||||
| 依赖软件环境 | Env工具/(IAR或arm-none-eabi-gcc)/git/调试器驱动 |
|
||||
|
||||
1) 下载源码
|
||||
## 3 下载源码
|
||||
|
||||
```bash
|
||||
git clone https://github.com/RT-Thread/rt-thread.git
|
||||
```
|
||||
|
||||
2) 配置工程并准备env
|
||||
## 4 环境准备
|
||||
|
||||
（Linux/Mac）
|
||||
### 4.1 Windows 环境准备
|
||||
|
||||
Windows环境下有两种开发环境，`GCC toolchain` 和 `IAR IDE`，根据不同的需求自行选择。
|
||||
|
||||
#### 4.1.1 IAR 发开环境
|
||||
|
||||
IAR 开发环境需要开发者自己安装软件，安装过程这里就不特别说明了。amebaz工程当前仅支持 `IAR 7.X` 的版本。
|
||||
|
||||
#### 4.4.2 GCC 开发环境
|
||||
|
||||
GCC开发使用 RT-Thread 官方提供的 env 工具，该工具集成 GCC 工具链，还具有编译构建环境、图形化系统配置及软件包管理功能。
|
||||
|
||||
下载地址：[点击下载env工具](https://www.rt-thread.org/page/download.html)
|
||||
|
||||
第一次使用env工具的开发者可以去这里查看教程：[RT-Thread env 工具用户手册](https://www.rt-thread.org/document/site/rtthread-development-guide/rtthread-tool-manual/env/env-user-manual/)。
|
||||
|
||||
### 4.2 Linux/Mac 环境准备
|
||||
|
||||
Linux/Mac 仅支持 GCC 工具链。
|
||||
|
||||
```bash
|
||||
cd rt-thread/bsp/amebaz
|
||||
|
|
@ -38,11 +54,17 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|
|||
pkgs --upgrade
|
||||
```
|
||||
|
||||
（Windows）
|
||||
## 5 配置工程（可选）
|
||||
|
||||
>在[RT-Thread官网][1]下载ENV工具包，并参考官网给出的env使用教程
|
||||
### 5.1 Windows 配置工程
|
||||
|
||||
3) 配置工程（可选）
|
||||
配置工程，需要在相应的工程目录下使用 `menuconfig` 命令打开图形界面，开发者根据自己的需求开关功能组件。
|
||||
|
||||
```bash
|
||||
menuconfig
|
||||
```
|
||||
|
||||
### 5.2 Linux/Mac 配置工程
|
||||
|
||||
（Linux/Mac）
|
||||
|
||||
|
|
@ -50,37 +72,44 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|
|||
scons --menuconfig
|
||||
```
|
||||
|
||||
（Windows(ENV环境中)）
|
||||
## 6 更新软件包
|
||||
|
||||
```bash
|
||||
menuconfig
|
||||
```
|
||||
|
||||
4) 下载package
|
||||
|
||||
amebaz配套的驱动库以package形式提供，故需先下载对应的package(realtek-ameba)，请使用env下载package
|
||||
amebaz 配套的驱动库以 package 形式提供，故需先下载对应的 package(realtek-ameba)，在工程目录下，使用下面命令下载软件包。
|
||||
|
||||
```bash
|
||||
pkgs --update
|
||||
```
|
||||
|
||||
*该板级支持包不支持生成mdk的工程及iar工程，后续会支持iar工程
|
||||
## 7 编译
|
||||
|
||||
5) 编译
|
||||
### 7.1 Windows 编译工程
|
||||
|
||||
Windows可以使用env编译工程，无需设置GCC工具链路径，直接在bsp/amebaz工程目录下编译即可。
|
||||
#### 7.1.1 IAR 编译工程
|
||||
|
||||
（Linux/Mac arm-none-eabi-gcc）
|
||||
使用以下指令设置gcc路径
|
||||
先打开工程目录下的IAR工程（project.eww），然后单击 Project 选项卡，单击 Rebuild All 选项，进行编译
|
||||
|
||||
|
||||
|
||||
#### 7.1.2 GCC 编译工程
|
||||
|
||||
可以使用env编译工程，无需设置GCC工具链路径，直接在 rt-thread/bsp/amebaz 工程目录下输入 `scons` 编译即可。编译完成后，在工程目录下生成 `image2_all_ota1.bin` 文件。
|
||||
|
||||
```bash
|
||||
scons
|
||||
```
|
||||
|
||||
### 7.2 Linux/Mac 编译工程
|
||||
|
||||
如果没有配置GCC路径的环境变量，则需要使用以下指令设置gcc路径。
|
||||
|
||||
```bash
|
||||
export RTT_EXEC_PATH=[GCC路径]
|
||||
```
|
||||
|
||||
编译（WindowsLinux/Mac arm-none-eabi-gcc）
|
||||
设置 GCC 路径后，使用 `scons` 编译工程。
|
||||
|
||||
```bash
|
||||
scons -j4
|
||||
scons
|
||||
```
|
||||
|
||||
出现下列信息即为编译成功
|
||||
|
|
@ -109,34 +138,74 @@ Done...
|
|||
scons: done building targets.
|
||||
```
|
||||
|
||||
如果编译正确无误，会产生image2_all_ota1.bin文件。
|
||||
如果编译正确无误，会在工程目录下生成 image2_all_ota1.bin 文件。
|
||||
|
||||
## 3. 烧写及执行
|
||||
## 8 烧写及执行
|
||||
|
||||
烧写可以使用仿真器 串口等多种方式 此处不再赘述
|
||||
### 8.1 IAR下载
|
||||
|
||||
### 3.1 运行结果
|
||||
下载程序分为两部分：
|
||||
|
||||
如果编译 & 烧写无误，会在专用日志串口*上看到RT-Thread的启动logo信息：
|
||||
（a）先使用jlink工具正确连接A14(CLK),A15(TMS),GND,VCC引脚
|
||||
|
||||
（b）打开 IAR 工程并完成编译后，单击 Project 选项卡下 Download 选项，选择 Download active application 下载程序。
|
||||
|
||||
|
||||
|
||||
（c）短按复位按钮，连接串口查看调试信息
|
||||
|
||||
### 8.2 串口下载
|
||||
|
||||
串口下载分为三个步骤
|
||||
|
||||
（a）板子进入下载模式
|
||||
|
||||
板子使用 `micros usb` 上电，然后按住 `FLASH` 键不放手，短按 `RST` 键，松开 `RST` 和 `FLASH` 键进入下载模式。
|
||||
|
||||
（b）配置下载工具
|
||||
|
||||
打开 Image Tool 下载工具配置使用，选择 `micros usb` 所对应的串口端口，选择波特率，默认波特率 1.5Mbps，然后打开串口端口，如下载工具图“①”所示
|
||||
|
||||
|
||||
|
||||
boot选择工程提供的 `boot_all.bin`, OTA1 选择生成的 image2_all_ota1.bin 文件（通常在工程目录下），并且注意在这两个选项前面打勾确认，其他默认即可，如下载工具图“②”。
|
||||
|
||||
（c）下载程序
|
||||
|
||||
按下 Download（如下载工具图 “③”），即可开始下载程序，并且可以从日志窗口查看到下载信息。
|
||||
|
||||
## 9 运行
|
||||
|
||||
下载程序后，连接串口（默认使用板子上 `micro usb`），打开串口工具，配置串口波特率 115200，数据位 8 位，停止位 1 位，无校验，无流控；短按 `RST` 键复位，串口将输出调试信息，如下所示：
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 3.0.4 build May 15 2018
|
||||
/ | \ 3.1.1 build Oct 25 2018
|
||||
2006 - 2018 Copyright by rt-thread team
|
||||
msh />
|
||||
lwIP-2.0.2 initialized!
|
||||
|
||||
Initializing WIFI ...
|
||||
LDO Mode, BD_Info: 0
|
||||
|
||||
LDO Mode, BD_Info: 0
|
||||
|
||||
WIFI initialized
|
||||
[I/WIFI] amebaz_wifi_start success
|
||||
build time: Oct 25 2018 10:52:02
|
||||
Hello RT-Thread!
|
||||
[I/WLAN.dev] wlan init success
|
||||
[I/WLAN.lwip] eth device init ok name:w0
|
||||
msh >
|
||||
```
|
||||
|
||||
*默认串口
|
||||
## 10 WIFI简单使用
|
||||
|
||||
## 4. WIFI简单使用
|
||||
|
||||
|
||||
### 4.1 wifi扫描命令
|
||||
### wifi扫描命令
|
||||
|
||||
wifi 扫描命令格式如下
|
||||
|
||||
```unknown
|
||||
```bash
|
||||
wifi scan
|
||||
```
|
||||
|
||||
|
|
@ -149,8 +218,7 @@ wifi 扫描命令格式如下
|
|||
|
||||
在调试工具中输入该命令，即可进行 wifi 命令扫描，调试信息如下
|
||||
|
||||
```unknown
|
||||
|
||||
```bash
|
||||
scan ap down
|
||||
SSID MAC security rssi chn Mbps
|
||||
------------------------------- ----------------- -------------- ---- --- ----
|
||||
|
|
@ -159,18 +227,15 @@ WQ1 88:25:93:94:51:54 WPA2_AES_PSK -76 13
|
|||
shyc1 a0:40:a0:a3:e8:c9 WPA2_AES_PSK -77 13 0
|
||||
KVIP 70:65:82:3b:71:43 WPA2_AES_PSK -83 11 0
|
||||
YST2016 88:25:93:c6:67:d1 WPA2_TKIP_PSK -84 4 0
|
||||
|
||||
```
|
||||
|
||||
> 注：
|
||||
>
|
||||
> 测试命令有关 wifi,均以wifi开头。
|
||||
> 注：wifi 有关的命令，均以wifi开头。
|
||||
|
||||
### 4.2 wifi 接入
|
||||
### wifi 接入
|
||||
|
||||
接入 wifi 之前，先介绍一下其接入的命令 ，如下
|
||||
|
||||
```unknown
|
||||
```bash
|
||||
wifi join ssid 123456789
|
||||
```
|
||||
|
||||
|
|
@ -185,7 +250,7 @@ YST2016 88:25:93:c6:67:d1 WPA2_TKIP_PSK -84 4
|
|||
|
||||
了解上述命令，并且成功完成前面步骤，在串口中输入 `wifi w0 join realthread_VIP 123456789` ，如下日志表示连接成功
|
||||
|
||||
```unknown
|
||||
```bash
|
||||
|
||||
WIFI wlan0 Setting:
|
||||
==============================
|
||||
|
|
@ -200,8 +265,7 @@ WIFI wlan0 Setting:
|
|||
|
||||
另外，提供一个简单的测试使用命令，查询设备IP地址命令：ifconfig。
|
||||
|
||||
```unknown
|
||||
|
||||
```bash
|
||||
network interface: w0 (Default)
|
||||
MTU: 1500
|
||||
MAC: 00 e0 4c d5 ac 46
|
||||
|
|
@ -211,21 +275,16 @@ gw address: 172.16.200.1
|
|||
net mask : 255.255.255.0
|
||||
dns server #0: 172.16.200.1
|
||||
dns server #1: 223.5.5.5
|
||||
|
||||
```
|
||||
|
||||
## 5. 驱动支持情况及计划
|
||||
## 驱动支持情况及计划
|
||||
|
||||
| 驱动 | 支持情况 | 备注 |
|
||||
| ---------- | :------: | :--------------------------: |
|
||||
| UART | 支持 | UART0 |
|
||||
| WLAN | 部分支持 | 仅支持STA模式 |
|
||||
|
||||
## 6. 已知问题
|
||||
|
||||
wlan仅支持STA模式，连接WIFI输入错误密码时，会宕机。
|
||||
|
||||
## 7. 联系人信息
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
[flyingcys][4] < [flyingcys@163.com][5] >
|
||||
|
|
|
|||
|
|
@ -0,0 +1,146 @@
|
|||
/*
|
||||
* File : smartconfig_demo.c
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-09-13 Bernard the first version
|
||||
*/
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
|
||||
#ifdef RT_USING_SMARTCONFIG_LIB
|
||||
|
||||
#include <sys/socket.h>
|
||||
#include "smartconfig.h"
|
||||
|
||||
#define NET_READY_TIME_OUT (rt_tick_from_millisecond(30 * 1000))
|
||||
|
||||
static int rt_wlan_device_connetct(char *ssid, char *passwd)
|
||||
{
|
||||
int result = RT_EOK;
|
||||
rt_uint8_t time_cnt = 0;
|
||||
|
||||
result = rt_wlan_connect(ssid, passwd);
|
||||
if (result != RT_EOK)
|
||||
{
|
||||
rt_kprintf("\nconnect ssid %s error:%d!\n", ssid, result);
|
||||
return result;
|
||||
};
|
||||
|
||||
do
|
||||
{
|
||||
rt_thread_mdelay(1000);
|
||||
time_cnt ++;
|
||||
if (rt_wlan_is_ready())
|
||||
{
|
||||
break;
|
||||
}
|
||||
}
|
||||
while (time_cnt <= (NET_READY_TIME_OUT / 1000));
|
||||
|
||||
if (time_cnt <= (NET_READY_TIME_OUT / 1000))
|
||||
{
|
||||
rt_kprintf("networking ready!\n");
|
||||
}
|
||||
else
|
||||
{
|
||||
rt_kprintf("wait ip got timeout!\n");
|
||||
result = -RT_ETIMEOUT;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
static void airkiss_send_notification(uint8_t random)
|
||||
{
|
||||
int sock = -1;
|
||||
int udpbufsize = 2;
|
||||
struct sockaddr_in UDPBCAddr, UDPBCServerAddr;
|
||||
|
||||
sock = socket(AF_INET, SOCK_DGRAM, 0);
|
||||
if (sock < 0)
|
||||
{
|
||||
rt_kprintf("notify create socket error!\n");
|
||||
goto _exit;
|
||||
}
|
||||
|
||||
UDPBCAddr.sin_family = AF_INET;
|
||||
UDPBCAddr.sin_port = htons(10000);
|
||||
UDPBCAddr.sin_addr.s_addr = htonl(0xffffffff);
|
||||
rt_memset(&(UDPBCAddr.sin_zero), 0, sizeof(UDPBCAddr.sin_zero));
|
||||
|
||||
UDPBCServerAddr.sin_family = AF_INET;
|
||||
UDPBCServerAddr.sin_port = htons(10000);
|
||||
UDPBCServerAddr.sin_addr.s_addr = htonl(INADDR_ANY);
|
||||
rt_memset(&(UDPBCServerAddr.sin_zero), 0, sizeof(UDPBCServerAddr.sin_zero));
|
||||
|
||||
if (setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &udpbufsize, sizeof(int)) != 0)
|
||||
{
|
||||
rt_kprintf("notify socket setsockopt error\n");
|
||||
goto _exit;
|
||||
}
|
||||
|
||||
if (bind(sock, (struct sockaddr *)&UDPBCServerAddr, sizeof(UDPBCServerAddr)) != 0)
|
||||
{
|
||||
rt_kprintf("notify socket bind error\n");
|
||||
goto _exit;
|
||||
}
|
||||
|
||||
for (int i = 0; i <= 20; i++)
|
||||
{
|
||||
int ret = sendto(sock, (char *)&random, 1, 0, (struct sockaddr *)&UDPBCAddr, sizeof(UDPBCAddr));
|
||||
rt_thread_delay(10);
|
||||
}
|
||||
|
||||
rt_kprintf("airkiss notification thread exit!\n");
|
||||
|
||||
_exit:
|
||||
if (sock >= 0)
|
||||
{
|
||||
closesocket(sock);
|
||||
}
|
||||
}
|
||||
|
||||
static int smartconfig_result(rt_smartconfig_type result_type, char *ssid, char *passwd, void *userdata, rt_uint8_t userdata_len)
|
||||
{
|
||||
rt_uint8_t random = *(rt_uint8_t *)userdata;
|
||||
|
||||
rt_kprintf("type:%d\n", result_type);
|
||||
rt_kprintf("ssid:%s\n", ssid);
|
||||
rt_kprintf("passwd:%s\n", passwd);
|
||||
rt_kprintf("user_data:0x%02x\n", random);
|
||||
if (rt_wlan_device_connetct(ssid, passwd) == RT_EOK)
|
||||
{
|
||||
airkiss_send_notification(random);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void smartconfig_demo(void)
|
||||
{
|
||||
rt_smartconfig_start(SMARTCONFIG_TYPE_AIRKISS, SMARTCONFIG_ENCRYPT_NONE, RT_NULL, smartconfig_result);
|
||||
}
|
||||
|
||||
#ifdef RT_USING_FINSH
|
||||
#include "finsh.h"
|
||||
MSH_CMD_EXPORT(smartconfig_demo, smartconfig demo);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -12,10 +12,8 @@
|
|||
* 2009-01-05 Bernard first implementation
|
||||
* 2018-03-15 flyingcys add amebaz
|
||||
*/
|
||||
#include <rtl8710b.h>
|
||||
#include <stdint.h>
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
|
||||
#include "board.h"
|
||||
#include "drv_uart.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -17,7 +17,17 @@
|
|||
#ifndef __BOARD_H__
|
||||
#define __BOARD_H__
|
||||
|
||||
#include "rtl8710b.h"
|
||||
#ifdef _LITTLE_ENDIAN
|
||||
#undef _LITTLE_ENDIAN
|
||||
#endif
|
||||
|
||||
#ifdef SECTION
|
||||
#undef SECTION
|
||||
#endif
|
||||
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
|
||||
void rt_hw_board_init(void);
|
||||
|
||||
|
|
|
|||
|
|
@ -22,11 +22,8 @@
|
|||
* 2017-05-30 Bernard the first version
|
||||
* 2018-03-15 flyingcys add amebaz
|
||||
*/
|
||||
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
|
||||
#include <rtl8710b.h>
|
||||
#include <serial_api.h>
|
||||
#include "board.h"
|
||||
#include "drv_uart.h"
|
||||
|
||||
|
|
@ -37,6 +34,8 @@ struct device_uart
|
|||
rt_uint32_t irqno;
|
||||
};
|
||||
|
||||
extern int LOGUART_SetBaud(u32 BaudRate);
|
||||
|
||||
#ifdef BSP_USING_UART0
|
||||
static struct rt_serial_device serial0;
|
||||
static struct device_uart uart0;
|
||||
|
|
@ -64,7 +63,6 @@ const struct rt_uart_ops _uart_ops =
|
|||
*/
|
||||
static rt_err_t ameba_uart_configure (struct rt_serial_device *serial, struct serial_configure *cfg)
|
||||
{
|
||||
rt_uint32_t baud_div;
|
||||
struct device_uart * uart;
|
||||
|
||||
RT_ASSERT(serial != RT_NULL);
|
||||
|
|
|
|||
|
|
@ -26,9 +26,6 @@
|
|||
#ifndef __DRV_UART_H__
|
||||
#define __DRV_UART_H__
|
||||
|
||||
#include "ameba_soc.h"
|
||||
#include "serial_api.h"
|
||||
|
||||
#if defined(CONFIG_PLATFORM_8711B)
|
||||
// 8710B
|
||||
#define UART_TX PA_23
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@
|
|||
#include <skbuff.h>
|
||||
#include "board.h"
|
||||
#include <string.h>
|
||||
#include <drv_wlan.h>
|
||||
#include <wlan_dev.h>
|
||||
#include "drv_wlan.h"
|
||||
#include "drv_wifi.h"
|
||||
|
||||
|
|
@ -153,9 +151,12 @@ static void rtw_connect_callbackfn(char *buf, int len, int flags, void *user_dat
|
|||
struct ameba_wifi *wifi = user_data;
|
||||
|
||||
LOG_D("L:%d wifi connect callback flags:%d user_data:%08x", __LINE__, flags, user_data);
|
||||
if( wifi_is_connected_to_ap() == 0)
|
||||
{
|
||||
wifi->connected = 1;
|
||||
rt_wlan_dev_indicate_event_handle(wifi->wlan, RT_WLAN_DEV_EVT_CONNECT, RT_NULL);
|
||||
}
|
||||
}
|
||||
|
||||
static void rtw_connect_fail_callbackfn(char *buf, int len, int flags, void *user_data)
|
||||
{
|
||||
|
|
@ -649,11 +650,8 @@ int rthw_wifi_low_init(void)
|
|||
LOG_I("amebaz_wifi_start success");
|
||||
LOG_D("F:%s L:%d wifi_sta:0x%08x wifi_ap:0x%08x", __FUNCTION__, __LINE__, &wifi_sta, &wifi_ap);
|
||||
|
||||
wifi_reg_event_handler(0, rtw_connect_callbackfn, &wifi_sta);
|
||||
wifi_reg_event_handler(1, rtw_disconnect_callbackfn, &wifi_sta);
|
||||
|
||||
wifi_reg_event_handler(8, rtw_sta_assoc_callbackfn, &wifi_ap);
|
||||
wifi_reg_event_handler(9, rtw_sta_disassoc_callbackfn, &wifi_ap);
|
||||
wifi_reg_event_handler(RTHW_WIFI_EVENT_FOURWAY_HANDSHAKE_DONE, rtw_connect_callbackfn, &wifi_sta);
|
||||
wifi_reg_event_handler(RTHW_WIFI_EVENT_DISCONNECT, rtw_disconnect_callbackfn, &wifi_sta);
|
||||
|
||||
_init_flag = 1;
|
||||
|
||||
|
|
|
|||
|
|
@ -26,15 +26,7 @@
|
|||
#include "wifi_constants.h"
|
||||
#include <wifi/wifi_util.h>
|
||||
#include <wifi/wifi_conf.h>
|
||||
|
||||
#ifdef _LITTLE_ENDIAN
|
||||
#undef _LITTLE_ENDIAN
|
||||
#endif
|
||||
|
||||
#include <rthw.h>
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
#include <wlan_dev.h>
|
||||
#include "board.h"
|
||||
#include "drv_wlan.h"
|
||||
|
||||
// #define SCAN_WAIT_TIME (10000)
|
||||
|
|
@ -349,7 +341,7 @@ static void rthw_wifi_promisc_callback(unsigned char *buf, unsigned int len, voi
|
|||
{
|
||||
if (monitor_callback)
|
||||
{
|
||||
monitor_callback(buf, len, RT_NULL);
|
||||
monitor_callback(userdata, len, RT_NULL);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -372,4 +364,3 @@ void rthw_wifi_monitor_enable(int enable)
|
|||
rthw_wifi_stop();
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@
|
|||
#ifndef __DRV_WLAN_H__
|
||||
#define __DRV_WLAN_H__
|
||||
|
||||
#include <rtthread.h>
|
||||
|
||||
typedef enum
|
||||
{
|
||||
RTHW_MODE_NONE = 0,
|
||||
|
|
@ -65,6 +63,26 @@ typedef enum {
|
|||
RTHW_SECURITY_FORCE_32_BIT = 0x7fffffff /**< Exists only to force rtw_security_t type to 32 bits */
|
||||
} rthw_security_t;
|
||||
|
||||
typedef enum {
|
||||
RTHW_WIFI_EVENT_CONNECT = 0,
|
||||
RTHW_WIFI_EVENT_DISCONNECT = 1,
|
||||
RTHW_WIFI_EVENT_FOURWAY_HANDSHAKE_DONE = 2,
|
||||
RTHW_WIFI_EVENT_SCAN_RESULT_REPORT = 3,
|
||||
RTHW_WIFI_EVENT_SCAN_DONE = 4,
|
||||
RTHW_WIFI_EVENT_RECONNECTION_FAIL = 5,
|
||||
RTHW_WIFI_EVENT_SEND_ACTION_DONE = 6,
|
||||
RTHW_WIFI_EVENT_RX_MGNT = 7,
|
||||
RTHW_WIFI_EVENT_STA_ASSOC = 8,
|
||||
RTHW_WIFI_EVENT_STA_DISASSOC = 9,
|
||||
RTHW_WIFI_EVENT_STA_WPS_START = 10,
|
||||
RTHW_WIFI_EVENT_WPS_FINISH = 11,
|
||||
RTHW_WIFI_EVENT_EAPOL_START = 12,
|
||||
RTHW_WIFI_EVENT_EAPOL_RECVD = 13,
|
||||
RTHW_WIFI_EVENT_NO_NETWORK = 14,
|
||||
RTHW_WIFI_EVENT_BEACON_AFTER_DHCP = 15,
|
||||
RTHW_WIFI_EVENT_MAX,
|
||||
}rthw_event_indicate_t;
|
||||
|
||||
typedef enum {
|
||||
RTHW_802_11_BAND_5GHZ = 0, /**< Denotes 5GHz radio band */
|
||||
RTHW_802_11_BAND_2_4GHZ = 1 /**< Denotes 2.4GHz radio band */
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 17 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 25 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 135 KiB |
|
|
@ -0,0 +1,7 @@
|
|||
menu "External Libraries"
|
||||
|
||||
config RT_USING_SMARTCONFIG_LIB
|
||||
bool "Using RT-Thrad SmartConfig Library"
|
||||
default n
|
||||
|
||||
endmenu
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
import os
|
||||
from building import *
|
||||
|
||||
objs = []
|
||||
cwd = GetCurrentDir()
|
||||
list = os.listdir(cwd)
|
||||
|
||||
for item in list:
|
||||
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
|
||||
objs = objs + SConscript(os.path.join(item, 'SConscript'))
|
||||
|
||||
Return('objs')
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
Import('rtconfig')
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = []
|
||||
path = [cwd + '/inc']
|
||||
libs = ['']
|
||||
libpath = [cwd + '/libs']
|
||||
|
||||
if rtconfig.CROSS_TOOL == 'gcc':
|
||||
libs += ['libsmartconfig_armcm4_gcc']
|
||||
elif rtconfig.CROSS_TOOL == 'iar':
|
||||
libs += ['libsmartconfig_armcm4_iar']
|
||||
|
||||
group = DefineGroup('smartconfig', src, depend = ['RT_USING_SMARTCONFIG_LIB'], CPPPATH = path, LIBS = libs, LIBPATH = libpath)
|
||||
|
||||
Return('group')
|
||||
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/*
|
||||
* File : smartconfig.h
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-09-13 Bernard the first version
|
||||
*/
|
||||
#ifndef __SMARTCONFIG_H__
|
||||
#define __SMARTCONFIG_H__
|
||||
|
||||
#define SMARTCONFIG_EVENT_CHANGE_CHANNEL (1 << 0)
|
||||
#define SMARTCONFIG_EVENT_LOCKED_CHANNEL (1 << 1)
|
||||
#define SMARTCONFIG_EVENT_COMPLETE (1 << 2)
|
||||
#define SMARTCONFIG_EVENT_RESTART (1 << 3)
|
||||
#define SMARTCONFIG_EVENT_STOP (1 << 4)
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SMARTCONFIG_TYPE_AIRKISS = 0,
|
||||
SMARTCONFIG_TYPE_JDSMART = 1,
|
||||
SMARTCONFIG_TYPE_ESPTOUCH,
|
||||
SMARTCONFIG_TYPE_REALTOUCH,
|
||||
SMARTCONFIG_TYPE_ALL,
|
||||
SMARTCONFIG_TYPE_MAX,
|
||||
} rt_smartconfig_type;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SMARTCONFIG_ENCRYPT_NONE,
|
||||
SMARTCONFIG_ENCRYPT_AES,
|
||||
} rt_smartconfig_encrypt_type;
|
||||
|
||||
typedef int (*rt_smartconfig_result_cb)(rt_smartconfig_type result_type, char *ssid, char *passwd, \
|
||||
void *userdata, rt_uint8_t userdata_len);
|
||||
typedef void (*rt_smartconfig_event_handle)(rt_uint32_t event, void *userdata);
|
||||
|
||||
int rt_smartconfig_start(rt_smartconfig_type config_type, rt_smartconfig_encrypt_type encrypt_type, char *encrypt, \
|
||||
rt_smartconfig_result_cb result_cb);
|
||||
|
||||
int rt_smartconfig_stop(void);
|
||||
|
||||
void rt_smartconfig_set_event_handle(rt_smartconfig_event_handle handle, void *userdata);
|
||||
|
||||
char *rt_smartconfig_version(void);
|
||||
|
||||
#endif
|
||||
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
|||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\project.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
|
|
@ -17,7 +17,7 @@
|
|||
#define IDLE_THREAD_STACK_SIZE 256
|
||||
#define RT_USING_TIMER_SOFT
|
||||
#define RT_TIMER_THREAD_PRIO 4
|
||||
#define RT_TIMER_THREAD_STACK_SIZE 512
|
||||
#define RT_TIMER_THREAD_STACK_SIZE 1024
|
||||
#define RT_DEBUG
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
|
@ -151,6 +151,9 @@
|
|||
|
||||
/* AT commands */
|
||||
|
||||
#define LWIP_USING_DHCPD
|
||||
#define DHCPD_SERVER_IP "192.168.169.1"
|
||||
#define DHCPD_USING_ROUTER
|
||||
|
||||
/* VBUS(Virtual Software BUS) */
|
||||
|
||||
|
|
@ -216,6 +219,10 @@
|
|||
|
||||
/* Env config */
|
||||
|
||||
|
||||
/* External Libraries */
|
||||
|
||||
#define RT_USING_SMARTCONFIG_LIB
|
||||
#define BSP_USING_WIFI
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -67,32 +67,6 @@ if PLATFORM == 'gcc':
|
|||
M_CFLAGS = CFLAGS + ' -mlong-calls -Dsourcerygxx -O0 -fPIC '
|
||||
M_LFLAGS = DEVICE + ' -Wl,-z,max-page-size=0x4 -shared -fPIC -e main -nostdlib'
|
||||
|
||||
elif PLATFORM == 'armcc':
|
||||
# toolchains
|
||||
CC = 'armcc'
|
||||
AS = 'armasm'
|
||||
AR = 'armar'
|
||||
LINK = 'armlink'
|
||||
TARGET_EXT = 'axf'
|
||||
|
||||
DEVICE = ' --cpu=cortex-m4.fp'
|
||||
CFLAGS = DEVICE + ' --apcs=interwork -DSTM32F429_439xx'
|
||||
AFLAGS = DEVICE
|
||||
LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32f429_flash.sct'
|
||||
|
||||
CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
|
||||
LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
|
||||
|
||||
EXEC_PATH += '/arm/bin40/'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -g -O0'
|
||||
AFLAGS += ' -g'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
|
||||
|
||||
elif PLATFORM == 'iar':
|
||||
# toolchains
|
||||
CC = 'iccarm'
|
||||
|
|
@ -101,7 +75,7 @@ elif PLATFORM == 'iar':
|
|||
LINK = 'ilinkarm'
|
||||
TARGET_EXT = 'out'
|
||||
|
||||
DEVICE = ' -D USE_STDPERIPH_DRIVER' + ' -D STM32F10X_HD'
|
||||
DEVICE = '-Dewarm'
|
||||
|
||||
CFLAGS = DEVICE
|
||||
CFLAGS += ' --diag_suppress Pa050'
|
||||
|
|
@ -112,26 +86,31 @@ elif PLATFORM == 'iar':
|
|||
CFLAGS += ' --no_tbaa'
|
||||
CFLAGS += ' --no_clustering'
|
||||
CFLAGS += ' --no_scheduling'
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' --endian=little'
|
||||
CFLAGS += ' --cpu=Cortex-M4'
|
||||
CFLAGS += ' -e'
|
||||
CFLAGS += ' --fpu=None'
|
||||
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
|
||||
CFLAGS += ' -Ol'
|
||||
CFLAGS += ' --use_c++_inline'
|
||||
CFLAGS += ' --silent'
|
||||
|
||||
AFLAGS = ''
|
||||
AFLAGS = DEVICE
|
||||
AFLAGS += ' -s+'
|
||||
AFLAGS += ' -w+'
|
||||
AFLAGS += ' -r'
|
||||
AFLAGS += ' --cpu Cortex-M4'
|
||||
AFLAGS += ' --fpu None'
|
||||
AFLAGS += ' -S'
|
||||
|
||||
LFLAGS = ' --config stm32f429_flash.icf'
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' -On'
|
||||
else:
|
||||
CFLAGS += ' -Oh'
|
||||
|
||||
LFLAGS = ' --config rom_symbol_v01_iar.icf'
|
||||
LFLAGS += ' --redirect _Printf=_PrintfTiny'
|
||||
LFLAGS += ' --redirect _Scanf=_ScanfSmall'
|
||||
LFLAGS += ' --entry __iar_program_start'
|
||||
|
||||
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
||||
POST_ACTION = ''
|
||||
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,10 @@
|
|||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\template.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<flash_board>
|
||||
<pass>
|
||||
<range>CODE 0x8000000 0x8004fff</range>
|
||||
<loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
|
||||
<abs_offset>0x00000000</abs_offset>
|
||||
</pass>
|
||||
<pass>
|
||||
<range>CODE 0x800b020 0x807ffff</range>
|
||||
<loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
|
||||
<abs_offset>0xb020</abs_offset>
|
||||
</pass>
|
||||
<pass>
|
||||
<range>CODE 0x10005000 0x10005A9B</range>
|
||||
<loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
|
||||
<abs_offset>0xb000</abs_offset>
|
||||
<args>--concat</args>
|
||||
</pass>
|
||||
<ignore>CODE 0x10005a9c 0x1003dfff</ignore>
|
||||
</flash_board>
|
||||
Loading…
Reference in New Issue