From db6a8c8eecc4df618763a7ed38a51c732319278f Mon Sep 17 00:00:00 2001
From: mysterywolf <920369182@qq.com>
Date: Mon, 14 Dec 2020 16:13:39 +0800
Subject: [PATCH] =?UTF-8?q?=E3=80=90English=20readme=E3=80=91=20update?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 bsp/stm32/docs/STM32_Nucleo-144_BSP_Introduction.md | 4 ++--
 bsp/stm32/stm32f446-st-nucleo/README_zh.md          | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/bsp/stm32/docs/STM32_Nucleo-144_BSP_Introduction.md b/bsp/stm32/docs/STM32_Nucleo-144_BSP_Introduction.md
index cb6e4f8f47..05ac07a869 100644
--- a/bsp/stm32/docs/STM32_Nucleo-144_BSP_Introduction.md
+++ b/bsp/stm32/docs/STM32_Nucleo-144_BSP_Introduction.md
@@ -72,7 +72,7 @@ Use a Type-A to Mini-B cable to connect the development board to the PC and turn
 
 After the program is successfully downloaded, the system runs automatically. Observe the running results of the LED on the development board, the LD3 and LD1 will light all the time, and LD2 will flash periodically.
 
-The USB virtual COM port connects to **USART2 by default**, and when the corresponding serial port (**115200-8-1-N**) is opened in the terminal tool, the output information of RT-Thread can be seen when the device is reset:
+The USB virtual COM port connects to **USART3 by default**, and when the corresponding serial port (**115200-8-1-N**) is opened in the terminal tool, the output information of RT-Thread can be seen when the device is reset:
 
 ```shell
  \ | /
@@ -102,7 +102,7 @@ Follow these tutorial videos to learn PuTTy:
 
 ## Advanced Features
 
-This BSP only enables GPIO and USART2 by default. If you need more advanced features such as SPI, I2C, you need to configure the BSP with RT-Thread [ENV tool](https://www.rt-thread.io/download.html?download=Env) , as follows:
+This BSP only enables GPIO and USART3 by default. If you need more advanced features such as SPI, I2C, you need to configure the BSP with RT-Thread [ENV tool](https://www.rt-thread.io/download.html?download=Env) , as follows:
 
 1. Open the Env tool under the specific BSP folder;
 2. Enter `menuconfig` command to configure the project, then save and exit;
diff --git a/bsp/stm32/stm32f446-st-nucleo/README_zh.md b/bsp/stm32/stm32f446-st-nucleo/README_zh.md
index e91f1ef45a..acc7091fd8 100644
--- a/bsp/stm32/stm32f446-st-nucleo/README_zh.md
+++ b/bsp/stm32/stm32f446-st-nucleo/README_zh.md
@@ -83,7 +83,7 @@ msh >
 ```
 ### 进阶使用
 
-此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+此 BSP 默认只开启了 GPIO 和 串口3 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
 
 1. 在 bsp 下打开 env 工具。