Merge pull request #1409 from Guozhanxin/new

add Seeed Studio RT-M7 board support.|添加Seeed Studio RT-M7开发板支持
This commit is contained in:
Tanek 2018-05-05 22:52:18 +08:00 committed by GitHub
commit 0f92097754
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 18 additions and 8 deletions

View File

@ -34,7 +34,9 @@ choice
config BOARD_RT1050_ShareBoard
bool "RT1050_ShareBoard"
config BOARD_RT1050_ATK
bool "RT1050_ATK"
bool "RT1050_ATK"
config BOARD_RT1050_SeeedStudio
bool "RT1050_SeeedStudio"
endchoice
menu "RT1050 Bsp Config"
@ -52,6 +54,7 @@ menu "Select uart drivers"
bool "Using uart3"
select RT_USING_SERIAL
default n
if !BOARD_RT1050_SeeedStudio
config RT_USING_UART4
bool "Using uart4"
select RT_USING_SERIAL
@ -64,7 +67,8 @@ menu "Select uart drivers"
bool "Using uart6"
select RT_USING_SERIAL
default n
if ! BOARD_RT1050_ATK
endif
if !BOARD_RT1050_ATK && !BOARD_RT1050_SeeedStudio
config RT_USING_UART7
bool "Using uart7"
select RT_USING_SERIAL
@ -101,7 +105,7 @@ menu "Select spi bus and dev drivers"
int "SPI bus clock source divider"
range 1 8
default 8
if !BOARD_RT1050_SeeedStudio
config RT_USING_SPIBUS1
bool "Using spi1 bus"
select RT_USING_SPI
@ -165,7 +169,7 @@ menu "Select spi bus and dev drivers"
config LPSPI2_SDI_GPIO_2
bool "GPIO_EMC_03"
endchoice
endif
config RT_USING_SPIBUS3
bool "Using spi3 bus"
select RT_USING_SPI
@ -178,6 +182,7 @@ menu "Select spi bus and dev drivers"
bool "GPIO_AD_B1_15"
config LPSPI3_SCK_GPIO_2
bool "GPIO_AD_B0_00"
depends on !BOARD_RT1050_SeeedStudio
endchoice
choice
prompt "spi3 bus sdo io choice"
@ -187,6 +192,7 @@ menu "Select spi bus and dev drivers"
bool "GPIO_AD_B1_14"
config LPSPI3_SDO_GPIO_2
bool "GPIO_AD_B0_01"
depends on !BOARD_RT1050_SeeedStudio
endchoice
choice
prompt "spi3 bus sdi io choice"
@ -196,6 +202,7 @@ menu "Select spi bus and dev drivers"
bool "GPIO_AD_B1_13"
config LPSPI3_SDI_GPIO_2
bool "GPIO_AD_B0_02"
depends on !BOARD_RT1050_SeeedStudio
endchoice
config RT_USING_SPIBUS4
@ -208,6 +215,7 @@ menu "Select spi bus and dev drivers"
depends on RT_USING_SPIBUS4
config LPSPI4_SCK_GPIO_1
bool "GPIO_B0_03"
depends on !BOARD_RT1050_SeeedStudio
config LPSPI4_SCK_GPIO_2
bool "GPIO_B1_07"
endchoice
@ -217,6 +225,7 @@ menu "Select spi bus and dev drivers"
depends on RT_USING_SPIBUS4
config LPSPI4_SDO_GPIO_1
bool "GPIO_B0_02"
depends on !BOARD_RT1050_SeeedStudio
config LPSPI4_SDO_GPIO_2
bool "GPIO_B1_06"
endchoice
@ -226,6 +235,7 @@ menu "Select spi bus and dev drivers"
depends on RT_USING_SPIBUS4
config LPSPI4_SDI_GPIO_1
bool "GPIO_B0_01"
depends on !BOARD_RT1050_SeeedStudio
config LPSPI4_SDI_GPIO_2
bool "GPIO_B1_05"
endchoice
@ -288,7 +298,7 @@ menu "Select iic bus drivers"
config HW_I2C1_BADURATE_400kHZ
bool "400kHZ"
endchoice
if !BOARD_RT1050_SeeedStudio
config RT_USING_HW_I2C2
bool "using hardware i2c2"
select RT_USING_I2C
@ -302,7 +312,7 @@ menu "Select iic bus drivers"
config HW_I2C2_BADURATE_400kHZ
bool "400kHZ"
endchoice
endif
config RT_USING_HW_I2C3
bool "using hardware i2c3"
select RT_USING_I2C
@ -332,7 +342,7 @@ menu "Select iic bus drivers"
endchoice
endmenu
if ! BOARD_RT1050_ATK
if !BOARD_RT1050_ATK && !BOARD_RT1050_SeeedStudio
menu "Select lcd driver"
if RT_USING_LCD && BOARD_RT1050_EVK
comment "Notice: Evk Board para: 480*272 4 4 8 2 40 10 106 45"

View File

@ -55,7 +55,7 @@ if GetDepend('RT_USING_USB_DEVICE'):
src += Glob('usb/phy/*.c')
CPPDEFINES += ['ENDIANNESS']
if GetDepend('BOARD_RT1050_EVK'):
if GetDepend('BOARD_RT1050_EVK') or GetDepend('BOARD_RT1050_SeeedStudio'):
src += ['hyper_flash_boot.c']
if GetDepend('RT_USING_LWIP'):