[bsp]update SConstruct&Kconfig&rtconfig.py

bsp/x1000/.config

@@ -7,15 +7,18 @@
 # RT-Thread Kernel
 #
 CONFIG_RT_NAME_MAX=8
-CONFIG_RT_ALIGN_SIZE=4
+CONFIG_RT_ALIGN_SIZE=8
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
-CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_TICK_PER_SECOND=1000
 CONFIG_RT_DEBUG=y
 CONFIG_RT_USING_OVERFLOW_CHECK=y
 CONFIG_RT_DEBUG_INIT=0
 CONFIG_RT_DEBUG_THREAD=0
 CONFIG_RT_USING_HOOK=y
-CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_IDLE_THREAD_STACK_SIZE=512
 # CONFIG_RT_USING_TIMER_SOFT is not set
 
 #
@@ -33,9 +36,10 @@ CONFIG_RT_USING_MESSAGEQUEUE=y
 #
 CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_MEMHEAP is not set
-CONFIG_RT_USING_HEAP=y
+# CONFIG_RT_USING_NOHEAP is not set
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
+CONFIG_RT_USING_HEAP=y
 
 #
 # Kernel Device Object
@@ -44,7 +48,7 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
-CONFIG_RT_CONSOLE_DEVICE_NAME="uart"
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart2"
 # CONFIG_RT_USING_MODULE is not set
 CONFIG_ARCH_MIPS=y
 CONFIG_ARCH_MIPS_XBURST=y
@@ -80,7 +84,7 @@ CONFIG_FINSH_USING_MSH_DEFAULT=y
 #
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_WORKDIR=y
-CONFIG_DFS_FILESYSTEMS_MAX=2
+CONFIG_DFS_FILESYSTEMS_MAX=4
 CONFIG_DFS_FD_MAX=4
 CONFIG_RT_USING_DFS_ELMFAT=y
 
@@ -89,14 +93,14 @@ CONFIG_RT_USING_DFS_ELMFAT=y
 #
 CONFIG_RT_DFS_ELM_CODE_PAGE=437
 CONFIG_RT_DFS_ELM_WORD_ACCESS=y
-CONFIG_RT_DFS_ELM_USE_LFN_0=y
+# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
 # CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
 # CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
-# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
+CONFIG_RT_DFS_ELM_USE_LFN_3=y
-CONFIG_RT_DFS_ELM_USE_LFN=0
+CONFIG_RT_DFS_ELM_USE_LFN=3
 CONFIG_RT_DFS_ELM_MAX_LFN=255
-CONFIG_RT_DFS_ELM_DRIVES=2
+CONFIG_RT_DFS_ELM_DRIVES=4
-CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
+CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=4096
 # CONFIG_RT_DFS_ELM_USE_ERASE is not set
 CONFIG_RT_DFS_ELM_REENTRANT=y
 CONFIG_RT_USING_DFS_DEVFS=y
@@ -114,7 +118,7 @@ CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_I2C is not set
 CONFIG_RT_USING_PIN=y
-# CONFIG_RT_USING_MTD_NOR is not set
+CONFIG_RT_USING_MTD_NOR=y
 # CONFIG_RT_USING_MTD_NAND is not set
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
@@ -194,12 +198,14 @@ CONFIG_RT_USING_POSIX=y
 #
 # multimedia packages
 #
+# CONFIG_PKG_USING_FASTLZ is not set
 
 #
 # tools packages
 #
 # CONFIG_PKG_USING_CMBACKTRACE is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
 
 #
 # miscellaneous packages

bsp/x1000/SConstruct

@@ -29,11 +29,11 @@ Export('rtconfig')
 # prepare building environment
 objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
 
-if not GetDepend('RT_USING_HARD_FLOAT'):
+if GetDepend('RT_USING_HARD_FLOAT'):
-    env['CCFLAGS']   = env['CCFLAGS'].replace('-mhard-float', '-msoft-float')
+    env['CCFLAGS']   = env['CCFLAGS'].replace('-msoft-float', '-mhard-float')
-    env['ASFLAGS']   = env['ASFLAGS'].replace('-mhard-float', '-msoft-float')
+    env['ASFLAGS']   = env['ASFLAGS'].replace('-msoft-float', '-mhard-float')
-    env['CXXFLAGS']  = env['CXXFLAGS'].replace('-mhard-float', '-msoft-float')
+    env['CXXFLAGS']  = env['CXXFLAGS'].replace('-msoft-float', '-mhard-float')
-    env['LINKFLAGS'] = env['LINKFLAGS'].replace('-mhard-float', '-msoft-float')
+    env['LINKFLAGS'] = env['LINKFLAGS'].replace('-msoft-float', '-mhard-float')
 
 # make a building
 DoBuilding(TARGET, objs)

bsp/x1000/drivers/Kconfig

@@ -46,6 +46,20 @@ if RT_USING_SDIO
         default 2048
 endif
 
+if RT_USING_I2C
+    config RT_USING_I2C0
+        bool "Using iic0 bus"
+        default y
+        
+    config RT_USING_I2C1
+        bool "Using iic1 bus"
+        default n
+
+    config RT_USING_I2C2
+        bool "Using iic2 bus"
+        default n
+endif
+
 if RT_USING_GUIENGINE
     config RT_USING_SLCD
         bool "Using LCD display"
@@ -70,9 +84,9 @@ if RT_USING_GUIENGINE
         endchoice
     endif
 
-    if RT_USING_I2C
+    if RT_USING_I2C0
         config RT_USING_TOUCH
-            bool "Using touch"
+            bool "Using LCD touch"
             default y
 
         if RT_USING_TOUCH
@@ -89,25 +103,13 @@ if RT_USING_GUIENGINE
 
             config RT_TOUCH_THREAD_PRIORITY
                 int "Set touch thread priority"
-                range 2 32
+                range 2 30
                 default 10
         endif
     endif
 endif
 
-if RT_USING_I2C
-    config RT_USING_I2C0
-        bool "Using iic0 bus"
-        default y
 
-    config RT_USING_I2C1
-        bool "Using iic1 bus"
-        default n
-
-    config RT_USING_I2C2
-        bool "Using iic2 bus"
-        default n
-endif
 
 config RT_USING_ICODEC
     default n

bsp/x1000/rtconfig.h

@@ -7,15 +7,18 @@
 /* RT-Thread Kernel */
 
 #define RT_NAME_MAX 8
-#define RT_ALIGN_SIZE 4
+#define RT_ALIGN_SIZE 8
+/* RT_THREAD_PRIORITY_8 is not set */
+#define RT_THREAD_PRIORITY_32
+/* RT_THREAD_PRIORITY_256 is not set */
 #define RT_THREAD_PRIORITY_MAX 32
-#define RT_TICK_PER_SECOND 100
+#define RT_TICK_PER_SECOND 1000
 #define RT_DEBUG
 #define RT_USING_OVERFLOW_CHECK
 #define RT_DEBUG_INIT 0
 #define RT_DEBUG_THREAD 0
 #define RT_USING_HOOK
-#define IDLE_THREAD_STACK_SIZE 256
+#define IDLE_THREAD_STACK_SIZE 512
 /* RT_USING_TIMER_SOFT is not set */
 
 /* Inter-Thread communication */
@@ -31,9 +34,10 @@
 
 #define RT_USING_MEMPOOL
 /* RT_USING_MEMHEAP is not set */
-#define RT_USING_HEAP
+/* RT_USING_NOHEAP is not set */
 #define RT_USING_SMALL_MEM
 /* RT_USING_SLAB is not set */
+#define RT_USING_HEAP
 
 /* Kernel Device Object */
 
@@ -41,7 +45,7 @@
 /* RT_USING_INTERRUPT_INFO is not set */
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
-#define RT_CONSOLE_DEVICE_NAME "uart"
+#define RT_CONSOLE_DEVICE_NAME "uart2"
 /* RT_USING_MODULE is not set */
 #define ARCH_MIPS
 #define ARCH_MIPS_XBURST
@@ -73,7 +77,7 @@
 
 #define RT_USING_DFS
 #define DFS_USING_WORKDIR
-#define DFS_FILESYSTEMS_MAX 2
+#define DFS_FILESYSTEMS_MAX 4
 #define DFS_FD_MAX 4
 #define RT_USING_DFS_ELMFAT
 
@@ -81,14 +85,14 @@
 
 #define RT_DFS_ELM_CODE_PAGE 437
 #define RT_DFS_ELM_WORD_ACCESS
-#define RT_DFS_ELM_USE_LFN_0
+/* RT_DFS_ELM_USE_LFN_0 is not set */
 /* RT_DFS_ELM_USE_LFN_1 is not set */
 /* RT_DFS_ELM_USE_LFN_2 is not set */
-/* RT_DFS_ELM_USE_LFN_3 is not set */
+#define RT_DFS_ELM_USE_LFN_3
-#define RT_DFS_ELM_USE_LFN 0
+#define RT_DFS_ELM_USE_LFN 3
 #define RT_DFS_ELM_MAX_LFN 255
-#define RT_DFS_ELM_DRIVES 2
+#define RT_DFS_ELM_DRIVES 4
-#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
+#define RT_DFS_ELM_MAX_SECTOR_SIZE 4096
 /* RT_DFS_ELM_USE_ERASE is not set */
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
@@ -105,7 +109,7 @@
 /* RT_USING_HWTIMER is not set */
 /* RT_USING_I2C is not set */
 #define RT_USING_PIN
-/* RT_USING_MTD_NOR is not set */
+#define RT_USING_MTD_NOR
 /* RT_USING_MTD_NAND is not set */
 /* RT_USING_RTC is not set */
 /* RT_USING_SDIO is not set */
@@ -170,10 +174,13 @@
 
 /* multimedia packages */
 
+/* PKG_USING_FASTLZ is not set */
+
 /* tools packages */
 
 /* PKG_USING_CMBACKTRACE is not set */
 /* PKG_USING_EASYLOGGER is not set */
+/* PKG_USING_SYSTEMVIEW is not set */
 
 /* miscellaneous packages */
 

bsp/x1000/rtconfig.py

@@ -18,13 +18,8 @@ else:
 if os.getenv('RTT_EXEC_PATH'):
     EXEC_PATH = os.getenv('RTT_EXEC_PATH')
 
-
 # BUILD = 'debug'
-# BUILD = 'release'
+BUILD = 'release'
-BUILD = 'release_O3'
-
-# FLOAT       = 'soft'
-FLOAT       = 'hard'
 
 if PLATFORM == 'gcc':
     # toolchains
@@ -40,11 +35,7 @@ if PLATFORM == 'gcc':
     OBJCPY  = PREFIX + 'objcopy'
     STRIP   = PREFIX + 'strip'
 
-    if FLOAT == 'soft':
+    DEVICE = ' -mips32r2 -msoft-float -mfp32'
-        DEVICE = ' -mips32r2 -msoft-float -mfp32'
-    else:
-        DEVICE = ' -mips32r2 -mhard-float -mfp32'
-
     CFLAGS  = DEVICE + ' -EL -G0 -mno-abicalls -fno-pic -fno-builtin -fno-exceptions -ffunction-sections -fno-omit-frame-pointer'
     AFLAGS  = ' -c' + DEVICE + ' -EL -x assembler-with-cpp'
     LFLAGS  = DEVICE + ' -EL -Wl,--gc-sections,-Map=rtthread_x1000.map,-cref,-u,Reset_Handler -T x1000_ram.lds'
@@ -54,8 +45,6 @@ if PLATFORM == 'gcc':
     if BUILD == 'debug':
         CFLAGS += ' -O0 -gdwarf-2'
         AFLAGS += ' -gdwarf-2'
-    elif BUILD == 'release_O3':
-        CFLAGS += ' -O3'
     else:
         CFLAGS += ' -O2'