[stm32][stm32f103-blue-pill] add USB device support.
This commit is contained in:
tangweikang
parent
55ef9164b5
commit
01b43fcb8c
|
|
@ -1,14 +1,14 @@
|
|||
[PreviousGenFiles]
|
||||
HeaderPath=F:/rt-thread/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc
|
||||
HeaderFiles=stm32f1xx_it.h;stm32f1xx_hal_conf.h;main.h;
|
||||
SourcePath=F:/rt-thread/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src
|
||||
SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;
|
||||
|
||||
[PreviousLibFiles]
|
||||
LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
|
||||
LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
|
||||
|
||||
[PreviousUsedKeilFiles]
|
||||
SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../\Src/system_stm32f1xx.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../\Src/system_stm32f1xx.c;../Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;
|
||||
SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
|
||||
HeaderPath=..\Drivers\STM32F1xx_HAL_Driver\Inc;..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F1xx\Include;..\Drivers\CMSIS\Include;..\Inc;
|
||||
CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;STM32F103xB;
|
||||
CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
|
||||
|
||||
[PreviousGenFiles]
|
||||
HeaderPath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Inc
|
||||
HeaderFiles=stm32f1xx_it.h;stm32f1xx_hal_conf.h;main.h;
|
||||
SourcePath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src
|
||||
SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;
|
||||
|
||||
|
|
|
|||
|
|
@ -14,14 +14,17 @@ Mcu.IP2=RCC
|
|||
Mcu.IP3=SPI1
|
||||
Mcu.IP4=SYS
|
||||
Mcu.IP5=USART1
|
||||
Mcu.IPNb=6
|
||||
Mcu.IP6=USB
|
||||
Mcu.IPNb=7
|
||||
Mcu.Name=STM32F103C(8-B)Tx
|
||||
Mcu.Package=LQFP48
|
||||
Mcu.Pin0=PC14-OSC32_IN
|
||||
Mcu.Pin1=PC15-OSC32_OUT
|
||||
Mcu.Pin10=PA13
|
||||
Mcu.Pin11=PA14
|
||||
Mcu.Pin12=VP_SYS_VS_Systick
|
||||
Mcu.Pin10=PA11
|
||||
Mcu.Pin11=PA12
|
||||
Mcu.Pin12=PA13
|
||||
Mcu.Pin13=PA14
|
||||
Mcu.Pin14=VP_SYS_VS_Systick
|
||||
Mcu.Pin2=PD0-OSC_IN
|
||||
Mcu.Pin3=PD1-OSC_OUT
|
||||
Mcu.Pin4=PA1
|
||||
|
|
@ -30,14 +33,15 @@ Mcu.Pin6=PA6
|
|||
Mcu.Pin7=PA7
|
||||
Mcu.Pin8=PA9
|
||||
Mcu.Pin9=PA10
|
||||
Mcu.PinsNb=13
|
||||
Mcu.PinsNb=15
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F103C8Tx
|
||||
MxCube.Version=5.2.1
|
||||
MxDb.Version=DB.5.0.21
|
||||
MxCube.Version=6.0.1
|
||||
MxDb.Version=DB.6.0.0
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
||||
|
|
@ -49,6 +53,10 @@ NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
|
|||
PA1.Signal=ADCx_IN1
|
||||
PA10.Mode=Asynchronous
|
||||
PA10.Signal=USART1_RX
|
||||
PA11.Mode=Device
|
||||
PA11.Signal=USB_DM
|
||||
PA12.Mode=Device
|
||||
PA12.Signal=USB_DP
|
||||
PA13.Mode=Serial_Wire
|
||||
PA13.Signal=SYS_JTMS-SWDIO
|
||||
PA14.Mode=Serial_Wire
|
||||
|
|
@ -65,14 +73,6 @@ PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
|||
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
||||
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
||||
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
||||
PCC.Checker=false
|
||||
PCC.Line=STM32F103
|
||||
PCC.MCU=STM32F103C(8-B)Tx
|
||||
PCC.PartNumber=STM32F103C8Tx
|
||||
PCC.Seq0=0
|
||||
PCC.Series=STM32F1
|
||||
PCC.Temperature=25
|
||||
PCC.Vdd=3.3
|
||||
PD0-OSC_IN.Mode=HSE-External-Oscillator
|
||||
PD0-OSC_IN.Signal=RCC_OSC_IN
|
||||
PD1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||
|
|
@ -87,7 +87,7 @@ ProjectManager.CustomerFirmwarePackage=
|
|||
ProjectManager.DefaultFWLocation=true
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32F103C8Tx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.7.0
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.3
|
||||
ProjectManager.FreePins=false
|
||||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
|
|
@ -100,35 +100,39 @@ ProjectManager.PreviousToolchain=
|
|||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
||||
ProjectManager.ProjectName=CubeMX_Config
|
||||
ProjectManager.RegisterCallBack=
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true
|
||||
RCC.ADCFreqValue=8000000
|
||||
RCC.AHBFreq_Value=16000000
|
||||
RCC.ADCFreqValue=12000000
|
||||
RCC.ADCPresc=RCC_ADCPCLK2_DIV6
|
||||
RCC.AHBFreq_Value=72000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV2
|
||||
RCC.APB1Freq_Value=8000000
|
||||
RCC.APB1TimFreq_Value=16000000
|
||||
RCC.APB2Freq_Value=16000000
|
||||
RCC.APB2TimFreq_Value=16000000
|
||||
RCC.FCLKCortexFreq_Value=16000000
|
||||
RCC.APB1Freq_Value=36000000
|
||||
RCC.APB1TimFreq_Value=72000000
|
||||
RCC.APB2Freq_Value=72000000
|
||||
RCC.APB2TimFreq_Value=72000000
|
||||
RCC.FCLKCortexFreq_Value=72000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=16000000
|
||||
RCC.IPParameters=ADCFreqValue,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,VCOOutput2Freq_Value
|
||||
RCC.MCOFreq_Value=16000000
|
||||
RCC.PLLCLKFreq_Value=16000000
|
||||
RCC.PLLMCOFreq_Value=8000000
|
||||
RCC.HCLKFreq_Value=72000000
|
||||
RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,USBPrescaler,VCOOutput2Freq_Value
|
||||
RCC.MCOFreq_Value=72000000
|
||||
RCC.PLLCLKFreq_Value=72000000
|
||||
RCC.PLLMCOFreq_Value=36000000
|
||||
RCC.PLLMUL=RCC_PLL_MUL9
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||
RCC.SYSCLKFreq_VALUE=16000000
|
||||
RCC.SYSCLKFreq_VALUE=72000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.TimSysFreq_Value=16000000
|
||||
RCC.USBFreq_Value=16000000
|
||||
RCC.TimSysFreq_Value=72000000
|
||||
RCC.USBFreq_Value=48000000
|
||||
RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
|
||||
RCC.VCOOutput2Freq_Value=8000000
|
||||
SH.ADCx_IN1.0=ADC1_IN1,IN1
|
||||
SH.ADCx_IN1.ConfNb=1
|
||||
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_8
|
||||
SPI1.CalculateBaudRate=2.0 MBits/s
|
||||
SPI1.CalculateBaudRate=9.0 MBits/s
|
||||
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||
SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate
|
||||
SPI1.Mode=SPI_MODE_MASTER
|
||||
|
|
|
|||
|
|
@ -5,32 +5,16 @@
|
|||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CONF_H
|
||||
|
|
@ -45,13 +29,14 @@
|
|||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/*#define HAL_CEC_MODULE_ENABLED */
|
||||
/*#define HAL_CORTEX_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
|
|
@ -67,11 +52,11 @@
|
|||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_PCCARD_MODULE_ENABLED */
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_PWR_MODULE_ENABLED */
|
||||
/*#define HAL_RCC_MODULE_ENABLED */
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_SDRAM_MODULE_ENABLED */
|
||||
|
|
@ -82,11 +67,11 @@
|
|||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
/*#define HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
|
|
@ -95,29 +80,29 @@
|
|||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
|
|
@ -128,11 +113,11 @@
|
|||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
|
|
@ -141,15 +126,39 @@
|
|||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
|
||||
#define USE_RTOS 0
|
||||
#define PREFETCH_ENABLE 1
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority (lowest by default) */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
|
@ -159,36 +168,36 @@
|
|||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2
|
||||
#define MAC_ADDR1 0
|
||||
#define MAC_ADDR2 0
|
||||
#define MAC_ADDR3 0
|
||||
#define MAC_ADDR4 0
|
||||
#define MAC_ADDR5 0
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
|
|
@ -203,162 +212,174 @@
|
|||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#include "stm32f1xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cec.h"
|
||||
#include "stm32f1xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
#include "stm32f1xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#include "stm32f1xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@
|
|||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
|
|
|||
|
|
@ -17,7 +17,6 @@
|
|||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
|
|
@ -48,6 +47,8 @@ SPI_HandleTypeDef hspi1;
|
|||
|
||||
UART_HandleTypeDef huart1;
|
||||
|
||||
PCD_HandleTypeDef hpcd_USB_FS;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
|
@ -58,6 +59,7 @@ static void MX_GPIO_Init(void);
|
|||
static void MX_USART1_UART_Init(void);
|
||||
static void MX_ADC1_Init(void);
|
||||
static void MX_SPI1_Init(void);
|
||||
static void MX_USB_PCD_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
|
@ -76,7 +78,6 @@ int main(void)
|
|||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
|
|
@ -99,6 +100,7 @@ int main(void)
|
|||
MX_USART1_UART_Init();
|
||||
MX_ADC1_Init();
|
||||
MX_SPI1_Init();
|
||||
MX_USB_PCD_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
|
@ -124,7 +126,8 @@ void SystemClock_Config(void)
|
|||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
|
|
@ -132,12 +135,12 @@ void SystemClock_Config(void)
|
|||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL2;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
|
|
@ -146,12 +149,13 @@ void SystemClock_Config(void)
|
|||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
|
||||
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV2;
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
|
||||
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
|
||||
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
|
|
@ -175,7 +179,7 @@ static void MX_ADC1_Init(void)
|
|||
/* USER CODE BEGIN ADC1_Init 1 */
|
||||
|
||||
/* USER CODE END ADC1_Init 1 */
|
||||
/** Common config
|
||||
/** Common config
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
||||
|
|
@ -188,7 +192,7 @@ static void MX_ADC1_Init(void)
|
|||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Configure Regular Channel
|
||||
/** Configure Regular Channel
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_1;
|
||||
sConfig.Rank = ADC_REGULAR_RANK_1;
|
||||
|
|
@ -274,6 +278,37 @@ static void MX_USART1_UART_Init(void)
|
|||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USB Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USB_PCD_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USB_Init 0 */
|
||||
|
||||
/* USER CODE END USB_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USB_Init 1 */
|
||||
|
||||
/* USER CODE END USB_Init 1 */
|
||||
hpcd_USB_FS.Instance = USB;
|
||||
hpcd_USB_FS.Init.dev_endpoints = 8;
|
||||
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
||||
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
||||
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
||||
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
|
||||
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USB_Init 2 */
|
||||
|
||||
/* USER CODE END USB_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
|
|
@ -314,7 +349,7 @@ void Error_Handler(void)
|
|||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
|
|
|
|||
|
|
@ -72,7 +72,7 @@ void HAL_MspInit(void)
|
|||
|
||||
/* System interrupt init*/
|
||||
|
||||
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||
*/
|
||||
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||||
|
||||
|
|
@ -97,10 +97,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
|
|||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**ADC1 GPIO Configuration
|
||||
PA1 ------> ADC1_IN1
|
||||
/**ADC1 GPIO Configuration
|
||||
PA1 ------> ADC1_IN1
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
|
|
@ -128,9 +128,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
|
|||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PA1 ------> ADC1_IN1
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PA1 ------> ADC1_IN1
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1);
|
||||
|
||||
|
|
@ -157,12 +157,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|||
/* USER CODE END SPI1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**SPI1 GPIO Configuration
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
|
|
@ -196,11 +196,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|||
/* USER CODE END SPI1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI1_CLK_DISABLE();
|
||||
|
||||
/**SPI1 GPIO Configuration
|
||||
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
||||
|
||||
|
|
@ -222,13 +222,16 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
|
|
@ -278,10 +281,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PA9 ------> USART1_TX
|
||||
PA10 ------> USART1_RX
|
||||
PA10 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
||||
|
||||
|
|
@ -292,6 +295,50 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief PCD MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hpcd: PCD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
|
||||
{
|
||||
if(hpcd->Instance==USB)
|
||||
{
|
||||
/* USER CODE BEGIN USB_MspInit 0 */
|
||||
|
||||
/* USER CODE END USB_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
/* USER CODE BEGIN USB_MspInit 1 */
|
||||
|
||||
/* USER CODE END USB_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief PCD MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hpcd: PCD handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
|
||||
{
|
||||
if(hpcd->Instance==USB)
|
||||
{
|
||||
/* USER CODE BEGIN USB_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USB_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USB_CLK_DISABLE();
|
||||
/* USER CODE BEGIN USB_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USB_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@
|
|||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
|
|
|
|||
|
|
@ -97,6 +97,12 @@ menu "On-chip Peripheral Drivers"
|
|||
default n
|
||||
|
||||
endif
|
||||
|
||||
config BSP_USING_USBD
|
||||
bool "Enable USB device"
|
||||
select RT_USING_USB_DEVICE
|
||||
default n
|
||||
|
||||
source "../libraries/HAL_Drivers/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -14,8 +14,10 @@ void SystemClock_Config(void)
|
|||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
|
|
@ -28,7 +30,7 @@ void SystemClock_Config(void)
|
|||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
|
|
@ -41,4 +43,11 @@ void SystemClock_Config(void)
|
|||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
|
||||
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
|
||||
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -78,28 +78,6 @@
|
|||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>18</CpuCode>
|
||||
<Books>
|
||||
<Book>
|
||||
<Number>0</Number>
|
||||
<Title>Base Board Schematics (MCBSTM32E)</Title>
|
||||
<Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-base-board-schematics.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>1</Number>
|
||||
<Title>Display Board Schematics (MCBSTM32E)</Title>
|
||||
<Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-display-board-schematics.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>2</Number>
|
||||
<Title>User Manual (MCBSTM32E)</Title>
|
||||
<Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e.chm</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>3</Number>
|
||||
<Title>MCBSTM32E Evaluation Board Web Page (MCBSTM32E)</Title>
|
||||
<Path>http://www.keil.com/mcbstm32e/</Path>
|
||||
</Book>
|
||||
</Books>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
|
|
@ -122,7 +100,10 @@
|
|||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<nTsel>1</nTsel>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>0</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
|
|
@ -179,8 +160,20 @@
|
|||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableFlashSeq>0</EnableFlashSeq>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
|
|
|
|||
|
|
@ -10,11 +10,12 @@
|
|||
<TargetName>rt-thread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F103C8</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<PackID>Keil.STM32F1xx_DFP.1.0.5</PackID>
|
||||
<PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
|
||||
<PackURL>http://www.keil.com/pack/</PackURL>
|
||||
<Cpu>IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
|
|
@ -84,6 +85,8 @@
|
|||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
|
|
@ -122,47 +125,6 @@
|
|||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
<Simulator>
|
||||
<UseSimulator>0</UseSimulator>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>1</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
</Simulator>
|
||||
<Target>
|
||||
<UseTarget>1</UseTarget>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>0</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<RestoreTracepoints>1</RestoreTracepoints>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
</Target>
|
||||
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
||||
<TargetSelection>1</TargetSelection>
|
||||
<SimDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
</SimDlls>
|
||||
<TargetDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
<Driver>BIN\UL2CM3.DLL</Driver>
|
||||
</TargetDlls>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
|
|
@ -221,12 +183,14 @@
|
|||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>0</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<hadIRAM2>0</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>3</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
|
|
@ -347,7 +311,7 @@
|
|||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<Optim>3</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
|
|
@ -360,7 +324,15 @@
|
|||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
|
|
@ -378,6 +350,7 @@
|
|||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<uClangAs>0</uClangAs>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
|
|
@ -412,4 +385,10 @@
|
|||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components/>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
</Project>
|
||||
|
|
|
|||
Loading…
Reference in New Issue