diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xb.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xb.h index fecc192071..96531fcd5b 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xb.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xb.h @@ -6124,6 +6124,8 @@ typedef struct ((INSTANCE) == TIM4) || \ ((INSTANCE) == TIM15)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xe.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xe.h index 1393aa6e92..17f6aeae62 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xe.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f100xe.h @@ -6689,6 +6689,8 @@ typedef struct ((INSTANCE) == TIM12) || \ ((INSTANCE) == TIM15)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101x6.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101x6.h index 1eebdc1fbc..76ad320340 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101x6.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101x6.h @@ -5576,6 +5576,8 @@ typedef struct (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3)) diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xb.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xb.h index 937307cca4..a72384fa34 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xb.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xb.h @@ -5685,6 +5685,8 @@ typedef struct ((INSTANCE) == TIM3) || \ ((INSTANCE) == TIM4)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xe.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xe.h index f35f46d354..6a42f2a17d 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xe.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xe.h @@ -6658,6 +6658,8 @@ typedef struct ((INSTANCE) == TIM4) || \ ((INSTANCE) == TIM5)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xg.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xg.h index 98a7d412ca..6deb946a3f 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xg.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f101xg.h @@ -6812,6 +6812,8 @@ typedef struct ((INSTANCE) == TIM5) || \ ((INSTANCE) == TIM12)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102x6.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102x6.h index 1069f2268d..0f46d46aeb 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102x6.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102x6.h @@ -6695,6 +6695,8 @@ typedef struct (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3)) diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102xb.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102xb.h index 493ee2c83a..4c62c4b2c9 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102xb.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f102xb.h @@ -6795,6 +6795,8 @@ typedef struct ((INSTANCE) == TIM3) || \ ((INSTANCE) == TIM4)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h index 0a3ae2a30a..fcea7fe624 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h @@ -10318,6 +10318,8 @@ typedef struct ((INSTANCE) == TIM2) || \ ((INSTANCE) == TIM3)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h index 9ff8ad6385..fb6173f6b3 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h @@ -10427,6 +10427,8 @@ typedef struct ((INSTANCE) == TIM3) || \ ((INSTANCE) == TIM4)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h index d48474c437..22c0312229 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h @@ -11500,6 +11500,8 @@ typedef struct ((INSTANCE) == TIM4) || \ ((INSTANCE) == TIM5)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM8) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xg.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xg.h index 99d58dbeb8..d9a0bb9c72 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xg.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xg.h @@ -11658,6 +11658,8 @@ typedef struct ((INSTANCE) == TIM5) || \ ((INSTANCE) == TIM12)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM8) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f105xc.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f105xc.h index e57b00b812..8f1fd5ae53 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f105xc.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f105xc.h @@ -14505,6 +14505,8 @@ typedef struct ((INSTANCE) == TIM4) || \ ((INSTANCE) == TIM5)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h index e902c17951..d1cd4bbd63 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h @@ -15416,6 +15416,8 @@ typedef struct ((INSTANCE) == TIM4) || \ ((INSTANCE) == TIM5)) +#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE) IS_TIM_MASTER_INSTANCE(INSTANCE) + #define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ (((INSTANCE) == TIM1) || \ ((INSTANCE) == TIM2) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Release_Notes.html b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Release_Notes.html index 8f4d1db80a..f6f3f5c7bd 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Release_Notes.html +++ b/bsp/stm32/libraries/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Release_Notes.html @@ -294,7 +294,29 @@ Notes for STM32F10x CMSIS -

Update History

V4.2.0 / 31-March-2017

+

Update History

V4.3.0 / 09-October-2018

+ + + + + + + + + + + + + + + + + + + + +

Main +Changes

V4.2.0 / 31-March-2017

diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can_ex.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h similarity index 100% rename from bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can_ex.h rename to bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_ex_legacy.h diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h new file mode 100644 index 0000000000..b2e3a02b77 --- /dev/null +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/Legacy/stm32f1xx_hal_can_legacy.h @@ -0,0 +1,796 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_can.h + * @author MCD Application Team + * @brief Header file of CAN HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_CAN_H +#define __STM32F1xx_HAL_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ + defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CAN_Exported_Types CAN Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */ + HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */ + HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */ + HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */ + HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */ + +}HAL_CAN_StateTypeDef; + +/** + * @brief CAN init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the length of a time quantum. + This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */ + + uint32_t Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of @ref CAN_operating_mode */ + + uint32_t SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of @ref CAN_synchronisation_jump_width */ + + uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ + + uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ + + uint32_t TTCM; /*!< Enable or disable the time triggered communication mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ABOM; /*!< Enable or disable the automatic bus-off management. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set to ENABLE or DISABLE */ +}CAN_InitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ + + uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. + This parameter can be a value of @ref CAN_Identifier_Type */ + + uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. + This parameter can be a value of @ref CAN_remote_transmission_request */ + + uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted. + This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. + This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + +}CanTxMsgTypeDef; + +/** + * @brief CAN Rx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ + + uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received. + This parameter can be a value of @ref CAN_Identifier_Type */ + + uint32_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of @ref CAN_remote_transmission_request */ + + uint32_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. + This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + + uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through. + This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + + uint32_t FIFONumber; /*!< Specifies the receive FIFO number. + This parameter can be CAN_FIFO0 or CAN_FIFO1 */ + +}CanRxMsgTypeDef; + +/** + * @brief CAN handle Structure definition + */ +typedef struct +{ + CAN_TypeDef *Instance; /*!< Register base address */ + + CAN_InitTypeDef Init; /*!< CAN required parameters */ + + CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */ + + CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */ + + CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */ + + __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */ + + HAL_LockTypeDef Lock; /*!< CAN locking object */ + + __IO uint32_t ErrorCode; /*!< CAN Error code */ + +}CAN_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CAN_Exported_Constants CAN Exported Constants + * @{ + */ + +/** @defgroup CAN_Error_Code CAN Error Code + * @{ + */ +#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */ +#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */ +#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */ +#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */ +#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */ +#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */ +#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */ +#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */ +#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */ +#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */ +#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */ +#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */ +/** + * @} + */ + +/** @defgroup CAN_InitStatus CAN initialization Status + * @{ + */ +#define CAN_INITSTATUS_FAILED 0x00000000U /*!< CAN initialization failed */ +#define CAN_INITSTATUS_SUCCESS 0x00000001U /*!< CAN initialization OK */ +/** + * @} + */ + +/** @defgroup CAN_operating_mode CAN Operating Mode + * @{ + */ +#define CAN_MODE_NORMAL 0x00000000U /*!< Normal mode */ +#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */ +#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */ +#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */ +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width + * @{ + */ +#define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */ +#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */ +#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */ +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1 + * @{ + */ +#define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */ +#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */ +#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */ +#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */ +#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */ +#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */ +#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */ +#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */ +#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */ +#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */ +#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */ +#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */ +#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */ +#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */ +#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */ +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2 + * @{ + */ +#define CAN_BS2_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */ +#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */ +#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */ +#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */ +#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */ +#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */ +#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */ +/** + * @} + */ + +/** @defgroup CAN_filter_mode CAN Filter Mode + * @{ + */ +#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */ +#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */ +/** + * @} + */ + +/** @defgroup CAN_filter_scale CAN Filter Scale + * @{ + */ +#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */ +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO CAN Filter FIFO + * @{ + */ +#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +/** + * @} + */ + +/** @defgroup CAN_Identifier_Type CAN Identifier Type + * @{ + */ +#define CAN_ID_STD 0x00000000U /*!< Standard Id */ +#define CAN_ID_EXT 0x00000004U /*!< Extended Id */ +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request + * @{ + */ +#define CAN_RTR_DATA 0x00000000U /*!< Data frame */ +#define CAN_RTR_REMOTE 0x00000002U /*!< Remote frame */ +/** + * @} + */ + +/** @defgroup CAN_transmit_constants CAN Transmit Constants + * @{ + */ +#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */ +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number + * @{ + */ +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ +/** + * @} + */ + +/** @defgroup CAN_flags CAN Flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with + CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP0_BIT_POSITION)) /*!< Request MailBox0 flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP1_BIT_POSITION)) /*!< Request MailBox1 flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP2_BIT_POSITION)) /*!< Request MailBox2 flag */ +#define CAN_FLAG_TXOK0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK0_BIT_POSITION)) /*!< Transmission OK MailBox0 flag */ +#define CAN_FLAG_TXOK1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK1_BIT_POSITION)) /*!< Transmission OK MailBox1 flag */ +#define CAN_FLAG_TXOK2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK2_BIT_POSITION)) /*!< Transmission OK MailBox2 flag */ +#define CAN_FLAG_TME0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME0_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_TME1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME1_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_TME2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME2_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ + +/* Receive Flags */ +#define CAN_FLAG_FF0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FF0_BIT_POSITION)) /*!< FIFO 0 Full flag */ +#define CAN_FLAG_FOV0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FOV0_BIT_POSITION)) /*!< FIFO 0 Overrun flag */ + +#define CAN_FLAG_FF1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FF1_BIT_POSITION)) /*!< FIFO 1 Full flag */ +#define CAN_FLAG_FOV1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FOV1_BIT_POSITION)) /*!< FIFO 1 Overrun flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_WKU_BIT_POSITION)) /*!< Wake up flag */ +#define CAN_FLAG_SLAK ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION)) /*!< Sleep acknowledge flag */ +#define CAN_FLAG_SLAKI ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION)) /*!< Sleep acknowledge flag */ + +/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EWG_BIT_POSITION)) /*!< Error warning flag */ +#define CAN_FLAG_EPV ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EPV_BIT_POSITION)) /*!< Error passive flag */ +#define CAN_FLAG_BOF ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_BOF_BIT_POSITION)) /*!< Bus-Off flag */ + +/** + * @} + */ + +/** @defgroup CAN_Interrupts CAN Interrupts + * @{ + */ +#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */ +#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */ +#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */ +#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */ +#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */ +#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */ +#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */ +#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */ +#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */ +#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */ +#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Constants CAN Private Constants + * @{ + */ + +/* CAN intermediate shift values used for CAN flags */ +#define TSR_REGISTER_INDEX 0x5U +#define RF0R_REGISTER_INDEX 0x2U +#define RF1R_REGISTER_INDEX 0x4U +#define MSR_REGISTER_INDEX 0x1U +#define ESR_REGISTER_INDEX 0x3U + +/* CAN flags bits position into their respective register (TSR, RF0R, RF1R or MSR regsiters) */ +/* Transmit Flags */ +#define CAN_TSR_RQCP0_BIT_POSITION 0x00000000U +#define CAN_TSR_RQCP1_BIT_POSITION 0x00000008U +#define CAN_TSR_RQCP2_BIT_POSITION 0x00000010U +#define CAN_TSR_TXOK0_BIT_POSITION 0x00000001U +#define CAN_TSR_TXOK1_BIT_POSITION 0x00000009U +#define CAN_TSR_TXOK2_BIT_POSITION 0x00000011U +#define CAN_TSR_TME0_BIT_POSITION 0x0000001AU +#define CAN_TSR_TME1_BIT_POSITION 0x0000001BU +#define CAN_TSR_TME2_BIT_POSITION 0x0000001CU + +/* Receive Flags */ +#define CAN_RF0R_FF0_BIT_POSITION 0x00000003U +#define CAN_RF0R_FOV0_BIT_POSITION 0x00000004U + +#define CAN_RF1R_FF1_BIT_POSITION 0x00000003U +#define CAN_RF1R_FOV1_BIT_POSITION 0x00000004U + +/* Operating Mode Flags */ +#define CAN_MSR_WKU_BIT_POSITION 0x00000003U +#define CAN_MSR_SLAK_BIT_POSITION 0x00000001U +#define CAN_MSR_SLAKI_BIT_POSITION 0x00000004U + +/* Error Flags */ +#define CAN_ESR_EWG_BIT_POSITION 0x00000000U +#define CAN_ESR_EPV_BIT_POSITION 0x00000001U +#define CAN_ESR_BOF_BIT_POSITION 0x00000002U + +/* Mask used by macro to get/clear CAN flags*/ +#define CAN_FLAG_MASK 0x000000FFU + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CAN_Exported_Macros CAN Exported Macros + * @{ + */ + +/** @brief Reset CAN handle state + * @param __HANDLE__: CAN handle. + * @retval None + */ +#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET) + +/** + * @brief Enable the specified CAN interrupts + * @param __HANDLE__: CAN handle. + * @param __INTERRUPT__: CAN Interrupt. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt + * @retval None. + */ +#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable the specified CAN interrupts + * @param __HANDLE__: CAN handle. + * @param __INTERRUPT__: CAN Interrupt. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt + * @retval None. + */ +#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** + * @brief Return the number of pending received messages. + * @param __HANDLE__: CAN handle. + * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval The number of pending message. + */ +#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ +((uint8_t)((__HANDLE__)->Instance->RF0R & 0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U))) + +/** @brief Check whether the specified CAN flag is set or not. + * @param __HANDLE__: specifies the CAN Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CAN_TSR_RQCP0: Request MailBox0 Flag + * @arg CAN_TSR_RQCP1: Request MailBox1 Flag + * @arg CAN_TSR_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag + * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag + * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag + * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag + * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag + * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag + * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag + * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag + * @arg CAN_FLAG_EWG: Error Warning Flag + * @arg CAN_FLAG_EPV: Error Passive Flag + * @arg CAN_FLAG_BOF: Bus-Off Flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \ +((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK)))) + +/** @brief Clear the specified CAN pending flag. + * @param __HANDLE__: specifies the CAN Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CAN_TSR_RQCP0: Request MailBox0 Flag + * @arg CAN_TSR_RQCP1: Request MailBox1 Flag + * @arg CAN_TSR_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag + * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag + * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag + * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag + * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag + * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag + * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +((((__FLAG__) >> 8U) == TSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == RF0R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == RF1R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == MSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U) + +/** @brief Check if the specified CAN interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the CAN Handle. + * @param __INTERRUPT__: specifies the CAN interrupt source to check. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable + * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt + * @arg CAN_IT_FF0 : FIFO 0 full interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt + * @arg CAN_IT_FF1 : FIFO 1 full interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt + * @arg CAN_IT_WKU : Wake-up interrupt + * @arg CAN_IT_SLK : Sleep acknowledge interrupt + * @arg CAN_IT_EWG : Error warning interrupt + * @arg CAN_IT_EPV : Error passive interrupt + * @arg CAN_IT_BOF : Bus-off interrupt + * @arg CAN_IT_LEC : Last error code interrupt + * @arg CAN_IT_ERR : Error Interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Check the transmission status of a CAN Frame. + * @param __HANDLE__: specifies the CAN Handle. + * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. + * @retval The new status of transmission (TRUE or FALSE). + */ +#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\ +(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\ + ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\ + ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2))) + +/** + * @brief Release the specified receive FIFO. + * @param __HANDLE__: CAN handle. + * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval None. + */ +#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ +((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) + +/** + * @brief Cancel a transmit request. + * @param __HANDLE__: specifies the CAN Handle. + * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. + * @retval None. + */ +#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\ +(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\ + ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\ + ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2)) + +/** + * @brief Enable or disables the DBG Freeze for CAN. + * @param __HANDLE__: specifies the CAN Handle. + * @param __NEWSTATE__: new state of the CAN peripheral. + * This parameter can be: ENABLE (CAN reception/transmission is frozen + * during debug. Reception FIFOs can still be accessed/controlled normally) + * or DISABLE (CAN is working during debug). + * @retval None + */ +#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \ +((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF)) + +/** + * @} + */ + +/* Include CAN HAL Extension module */ +#include "stm32f1xx_hal_can_ex_legacy.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CAN_Exported_Functions + * @{ + */ + +/** @addtogroup CAN_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan); +HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig); +HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan); +void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan); +void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan); +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group2 + * @brief I/O operation functions + * @{ + */ +/* I/O operation functions *****************************************************/ +HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout); +HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout); +HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber); +HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan); +void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan); +void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan); +void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan); +void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan); +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group3 + * @brief CAN Peripheral State functions + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan); +HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CAN_Private_Macros CAN Private Macros + * @{ + */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \ + ((MODE) == CAN_MODE_LOOPBACK)|| \ + ((MODE) == CAN_MODE_SILENT) || \ + ((MODE) == CAN_MODE_SILENT_LOOPBACK)) +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \ + ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ)) +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ) +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ) +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U)) + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \ + ((MODE) == CAN_FILTERMODE_IDLIST)) +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \ + ((SCALE) == CAN_FILTERSCALE_32BIT)) +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \ + ((FIFO) == CAN_FILTER_FIFO1)) +#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U) + +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= 0x00007FFU) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) + +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \ + ((IDTYPE) == CAN_ID_EXT)) +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_CAN_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h index 74662d9e34..7dca378e79 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h @@ -54,7 +54,6 @@ extern "C" { * @{ */ -/* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup HAL_Exported_Constants HAL Exported Constants @@ -74,6 +73,9 @@ typedef enum /** * @} */ +/* Exported types ------------------------------------------------------------*/ +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; /** * @} diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h index 309df36a89..923b53eb61 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h @@ -6,7 +6,7 @@ ****************************************************************************** * @attention * - *

© COPYRIGHT(c) 2017 STMicroelectronics

+ *

© COPYRIGHT(c) 2016 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: @@ -34,15 +34,12 @@ */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CAN_H -#define __STM32F1xx_HAL_CAN_H +#ifndef STM32F1xx_HAL_CAN_H +#define STM32F1xx_HAL_CAN_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif - -#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ - defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal_def.h" @@ -51,6 +48,7 @@ * @{ */ +#if defined (CAN1) /** @addtogroup CAN * @{ */ @@ -59,7 +57,6 @@ /** @defgroup CAN_Exported_Types CAN Exported Types * @{ */ - /** * @brief HAL State structures definition */ @@ -67,144 +64,183 @@ typedef enum { HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */ HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */ - HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */ - HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */ - HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */ + HAL_CAN_STATE_LISTENING = 0x02U, /*!< CAN receive process is ongoing */ + HAL_CAN_STATE_SLEEP_PENDING = 0x03U, /*!< CAN sleep request is pending */ + HAL_CAN_STATE_SLEEP_ACTIVE = 0x04U, /*!< CAN sleep mode is active */ + HAL_CAN_STATE_ERROR = 0x05U /*!< CAN error state */ -}HAL_CAN_StateTypeDef; +} HAL_CAN_StateTypeDef; /** * @brief CAN init structure definition */ typedef struct { - uint32_t Prescaler; /*!< Specifies the length of a time quantum. - This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */ + uint32_t Prescaler; /*!< Specifies the length of a time quantum. + This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */ - uint32_t Mode; /*!< Specifies the CAN operating mode. - This parameter can be a value of @ref CAN_operating_mode */ + uint32_t Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of @ref CAN_operating_mode */ - uint32_t SJW; /*!< Specifies the maximum number of time quanta - the CAN hardware is allowed to lengthen or - shorten a bit to perform resynchronization. - This parameter can be a value of @ref CAN_synchronisation_jump_width */ + uint32_t SyncJumpWidth; /*!< Specifies the maximum number of time quanta the CAN hardware + is allowed to lengthen or shorten a bit to perform resynchronization. + This parameter can be a value of @ref CAN_synchronisation_jump_width */ - uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ + uint32_t TimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ - uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ + uint32_t TimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ - uint32_t TTCM; /*!< Enable or disable the time triggered communication mode. - This parameter can be set to ENABLE or DISABLE. */ + FunctionalState TimeTriggeredMode; /*!< Enable or disable the time triggered communication mode. + This parameter can be set to ENABLE or DISABLE. */ - uint32_t ABOM; /*!< Enable or disable the automatic bus-off management. - This parameter can be set to ENABLE or DISABLE */ + FunctionalState AutoBusOff; /*!< Enable or disable the automatic bus-off management. + This parameter can be set to ENABLE or DISABLE. */ - uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode. - This parameter can be set to ENABLE or DISABLE */ + FunctionalState AutoWakeUp; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set to ENABLE or DISABLE. */ - uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode. - This parameter can be set to ENABLE or DISABLE */ + FunctionalState AutoRetransmission; /*!< Enable or disable the non-automatic retransmission mode. + This parameter can be set to ENABLE or DISABLE. */ - uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode. - This parameter can be set to ENABLE or DISABLE */ + FunctionalState ReceiveFifoLocked; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set to ENABLE or DISABLE. */ - uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority. - This parameter can be set to ENABLE or DISABLE */ -}CAN_InitTypeDef; + FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority. + This parameter can be set to ENABLE or DISABLE. */ -/** - * @brief CAN Tx message structure definition +} CAN_InitTypeDef; + +/** + * @brief CAN filter configuration structure definition + */ +typedef struct +{ + uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint32_t FilterBank; /*!< Specifies the filter bank which will be initialized. + For single CAN instance(14 dedicated filter banks), + this parameter must be a number between Min_Data = 0 and Max_Data = 13. + For dual CAN instances(28 filter banks shared), + this parameter must be a number between Min_Data = 0 and Max_Data = 27. */ + + uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint32_t FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + uint32_t FilterActivation; /*!< Enable or disable the filter. + This parameter can be a value of @ref CAN_filter_activation */ + + uint32_t SlaveStartFilterBank; /*!< Select the start filter bank for the slave CAN instance. + For single CAN instances, this parameter is meaningless. + For dual CAN instances, all filter banks with lower index are assigned to master + CAN instance, whereas all filter banks with greater index are assigned to slave + CAN instance. + This parameter must be a number between Min_Data = 0 and Max_Data = 27. */ + +} CAN_FilterTypeDef; + +/** + * @brief CAN Tx message header structure definition */ typedef struct { uint32_t StdId; /*!< Specifies the standard identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ + This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */ uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ + This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. - This parameter can be a value of @ref CAN_Identifier_Type */ + This parameter can be a value of @ref CAN_identifier_type */ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. This parameter can be a value of @ref CAN_remote_transmission_request */ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted. - This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ + This parameter must be a number between Min_Data = 0 and Max_Data = 8. */ - uint8_t Data[8]; /*!< Contains the data to be transmitted. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start + of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7]. + @note: Time Triggered Communication Mode must be enabled. + @note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent. + This parameter can be set to ENABLE or DISABLE. */ -}CanTxMsgTypeDef; +} CAN_TxHeaderTypeDef; /** - * @brief CAN Rx message structure definition + * @brief CAN Rx message header structure definition */ typedef struct { - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */ - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */ - uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received. - This parameter can be a value of @ref CAN_Identifier_Type */ + uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. + This parameter can be a value of @ref CAN_identifier_type */ - uint32_t RTR; /*!< Specifies the type of frame for the received message. - This parameter can be a value of @ref CAN_remote_transmission_request */ + uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. + This parameter can be a value of @ref CAN_remote_transmission_request */ - uint32_t DLC; /*!< Specifies the length of the frame that will be received. - This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ + uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted. + This parameter must be a number between Min_Data = 0 and Max_Data = 8. */ - uint8_t Data[8]; /*!< Contains the data to be received. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception. + @note: Time Triggered Communication Mode must be enabled. + This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */ - uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ + uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element. + This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */ - uint32_t FIFONumber; /*!< Specifies the receive FIFO number. - This parameter can be CAN_FIFO0 or CAN_FIFO1 */ - -}CanRxMsgTypeDef; +} CAN_RxHeaderTypeDef; /** * @brief CAN handle Structure definition */ -typedef struct +typedef struct __CAN_HandleTypeDef { - CAN_TypeDef *Instance; /*!< Register base address */ + CAN_TypeDef *Instance; /*!< Register base address */ - CAN_InitTypeDef Init; /*!< CAN required parameters */ + CAN_InitTypeDef Init; /*!< CAN required parameters */ - CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */ + __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */ - CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */ + __IO uint32_t ErrorCode; /*!< CAN Error code. + This parameter can be a value of @ref CAN_Error_Code */ - CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */ - - __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */ - - HAL_LockTypeDef Lock; /*!< CAN locking object */ - - __IO uint32_t ErrorCode; /*!< CAN Error code */ - -}CAN_HandleTypeDef; +} CAN_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ + /** @defgroup CAN_Exported_Constants CAN Exported Constants * @{ */ @@ -212,28 +248,41 @@ typedef struct /** @defgroup CAN_Error_Code CAN Error Code * @{ */ -#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */ -#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */ -#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */ -#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */ -#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */ -#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */ -#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */ -#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */ -#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */ -#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */ -#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */ -#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */ +#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< Protocol Error Warning */ +#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< Error Passive */ +#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< Bus-off error */ +#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */ +#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */ +#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */ +#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive error */ +#define HAL_CAN_ERROR_BD (0x00000080U) /*!< Bit dominant error */ +#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< CRC error */ +#define HAL_CAN_ERROR_RX_FOV0 (0x00000200U) /*!< Rx FIFO0 overrun error */ +#define HAL_CAN_ERROR_RX_FOV1 (0x00000400U) /*!< Rx FIFO1 overrun error */ +#define HAL_CAN_ERROR_TX_ALST0 (0x00000800U) /*!< TxMailbox 0 transmit failure due to arbitration lost */ +#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 1 transmit failure due to tranmit error */ +#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */ +#define HAL_CAN_ERROR_TX_TERR1 (0x00004000U) /*!< TxMailbox 1 transmit failure due to tranmit error */ +#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */ +#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 1 transmit failure due to tranmit error */ +#define HAL_CAN_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */ +#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U) /*!< Peripheral not initialized */ +#define HAL_CAN_ERROR_NOT_READY (0x00080000U) /*!< Peripheral not ready */ +#define HAL_CAN_ERROR_NOT_STARTED (0x00100000U) /*!< Peripheral not started */ +#define HAL_CAN_ERROR_PARAM (0x00200000U) /*!< Parameter error */ + +#define HAL_CAN_ERROR_INTERNAL (0x00800000U) /*!< Internal error */ + /** * @} */ -/** @defgroup CAN_InitStatus CAN initialization Status +/** @defgroup CAN_InitStatus CAN InitStatus * @{ */ -#define CAN_INITSTATUS_FAILED 0x00000000U /*!< CAN initialization failed */ -#define CAN_INITSTATUS_SUCCESS 0x00000001U /*!< CAN initialization OK */ +#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */ +#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */ /** * @} */ @@ -241,7 +290,7 @@ typedef struct /** @defgroup CAN_operating_mode CAN Operating Mode * @{ */ -#define CAN_MODE_NORMAL 0x00000000U /*!< Normal mode */ +#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */ #define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */ #define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */ #define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */ @@ -249,10 +298,11 @@ typedef struct * @} */ + /** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width * @{ */ -#define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */ #define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */ #define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */ #define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */ @@ -263,7 +313,7 @@ typedef struct /** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1 * @{ */ -#define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */ #define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */ #define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */ #define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */ @@ -283,10 +333,10 @@ typedef struct * @} */ -/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2 +/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2 * @{ */ -#define CAN_BS2_1TQ 0x00000000U /*!< 1 time quantum */ +#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */ #define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */ #define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */ #define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */ @@ -298,11 +348,11 @@ typedef struct * @} */ -/** @defgroup CAN_filter_mode CAN Filter Mode +/** @defgroup CAN_filter_mode CAN Filter Mode * @{ */ -#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */ -#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */ +#define CAN_FILTERMODE_IDMASK (0x00000000U) /*!< Identifier mask mode */ +#define CAN_FILTERMODE_IDLIST (0x00000001U) /*!< Identifier list mode */ /** * @} */ @@ -310,8 +360,17 @@ typedef struct /** @defgroup CAN_filter_scale CAN Filter Scale * @{ */ -#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */ -#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */ +#define CAN_FILTERSCALE_16BIT (0x00000000U) /*!< Two 16-bit filters */ +#define CAN_FILTERSCALE_32BIT (0x00000001U) /*!< One 32-bit filter */ +/** + * @} + */ + +/** @defgroup CAN_filter_activation CAN Filter Activation + * @{ + */ +#define CAN_FILTER_DISABLE (0x00000000U) /*!< Disable filter */ +#define CAN_FILTER_ENABLE (0x00000001U) /*!< Enable filter */ /** * @} */ @@ -319,17 +378,17 @@ typedef struct /** @defgroup CAN_filter_FIFO CAN Filter FIFO * @{ */ -#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ -#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define CAN_FILTER_FIFO0 (0x00000000U) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_FILTER_FIFO1 (0x00000001U) /*!< Filter FIFO 1 assignment for filter x */ /** * @} */ -/** @defgroup CAN_Identifier_Type CAN Identifier Type +/** @defgroup CAN_identifier_type CAN Identifier Type * @{ */ -#define CAN_ID_STD 0x00000000U /*!< Standard Id */ -#define CAN_ID_EXT 0x00000004U /*!< Extended Id */ +#define CAN_ID_STD (0x00000000U) /*!< Standard Id */ +#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */ /** * @} */ @@ -337,25 +396,27 @@ typedef struct /** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request * @{ */ -#define CAN_RTR_DATA 0x00000000U /*!< Data frame */ -#define CAN_RTR_REMOTE 0x00000002U /*!< Remote frame */ +#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */ +#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */ /** * @} */ -/** @defgroup CAN_transmit_constants CAN Transmit Constants +/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number * @{ */ -#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */ +#define CAN_RX_FIFO0 (0x00000000U) /*!< CAN receive FIFO 0 */ +#define CAN_RX_FIFO1 (0x00000001U) /*!< CAN receive FIFO 1 */ /** * @} */ -/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number +/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes * @{ */ -#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ -#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ +#define CAN_TX_MAILBOX0 (0x00000001U) /*!< Tx Mailbox 0 */ +#define CAN_TX_MAILBOX1 (0x00000002U) /*!< Tx Mailbox 1 */ +#define CAN_TX_MAILBOX2 (0x00000004U) /*!< Tx Mailbox 2 */ /** * @} */ @@ -363,69 +424,72 @@ typedef struct /** @defgroup CAN_flags CAN Flags * @{ */ -/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() - and CAN_ClearFlag() functions. */ -/* If the flag is 0x1XXXXXXX, it means that it can only be used with - CAN_GetFlagStatus() function. */ - /* Transmit Flags */ -#define CAN_FLAG_RQCP0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP0_BIT_POSITION)) /*!< Request MailBox0 flag */ -#define CAN_FLAG_RQCP1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP1_BIT_POSITION)) /*!< Request MailBox1 flag */ -#define CAN_FLAG_RQCP2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP2_BIT_POSITION)) /*!< Request MailBox2 flag */ -#define CAN_FLAG_TXOK0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK0_BIT_POSITION)) /*!< Transmission OK MailBox0 flag */ -#define CAN_FLAG_TXOK1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK1_BIT_POSITION)) /*!< Transmission OK MailBox1 flag */ -#define CAN_FLAG_TXOK2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK2_BIT_POSITION)) /*!< Transmission OK MailBox2 flag */ -#define CAN_FLAG_TME0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME0_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME1_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME2_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request complete MailBox 0 flag */ +#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox 0 flag */ +#define CAN_FLAG_ALST0 (0x00000502U) /*!< Arbitration Lost MailBox 0 flag */ +#define CAN_FLAG_TERR0 (0x00000503U) /*!< Transmission error MailBox 0 flag */ +#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request complete MailBox1 flag */ +#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox 1 flag */ +#define CAN_FLAG_ALST1 (0x0000050AU) /*!< Arbitration Lost MailBox 1 flag */ +#define CAN_FLAG_TERR1 (0x0000050BU) /*!< Transmission error MailBox 1 flag */ +#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request complete MailBox2 flag */ +#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox 2 flag */ +#define CAN_FLAG_ALST2 (0x00000512U) /*!< Arbitration Lost MailBox 2 flag */ +#define CAN_FLAG_TERR2 (0x00000513U) /*!< Transmission error MailBox 2 flag */ +#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */ +#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 1 empty flag */ +#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 2 empty flag */ +#define CAN_FLAG_LOW0 (0x0000051DU) /*!< Lowest priority mailbox 0 flag */ +#define CAN_FLAG_LOW1 (0x0000051EU) /*!< Lowest priority mailbox 1 flag */ +#define CAN_FLAG_LOW2 (0x0000051FU) /*!< Lowest priority mailbox 2 flag */ /* Receive Flags */ -#define CAN_FLAG_FF0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FF0_BIT_POSITION)) /*!< FIFO 0 Full flag */ -#define CAN_FLAG_FOV0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FOV0_BIT_POSITION)) /*!< FIFO 0 Overrun flag */ - -#define CAN_FLAG_FF1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FF1_BIT_POSITION)) /*!< FIFO 1 Full flag */ -#define CAN_FLAG_FOV1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FOV1_BIT_POSITION)) /*!< FIFO 1 Overrun flag */ +#define CAN_FLAG_FF0 (0x00000203U) /*!< RX FIFO 0 Full flag */ +#define CAN_FLAG_FOV0 (0x00000204U) /*!< RX FIFO 0 Overrun flag */ +#define CAN_FLAG_FF1 (0x00000403U) /*!< RX FIFO 1 Full flag */ +#define CAN_FLAG_FOV1 (0x00000404U) /*!< RX FIFO 1 Overrun flag */ /* Operating Mode Flags */ -#define CAN_FLAG_WKU ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_WKU_BIT_POSITION)) /*!< Wake up flag */ -#define CAN_FLAG_SLAK ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION)) /*!< Sleep acknowledge flag */ -#define CAN_FLAG_SLAKI ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION)) /*!< Sleep acknowledge flag */ - -/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. - In this case the SLAK bit can be polled.*/ +#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */ +#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */ +#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */ +#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up interrupt flag */ +#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge interrupt flag */ /* Error Flags */ -#define CAN_FLAG_EWG ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EWG_BIT_POSITION)) /*!< Error warning flag */ -#define CAN_FLAG_EPV ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EPV_BIT_POSITION)) /*!< Error passive flag */ -#define CAN_FLAG_BOF ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_BOF_BIT_POSITION)) /*!< Bus-Off flag */ - +#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */ +#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */ +#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */ /** * @} */ + /** @defgroup CAN_Interrupts CAN Interrupts * @{ */ -#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */ +/* Transmit Interrupt */ +#define CAN_IT_TX_MAILBOX_EMPTY ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */ /* Receive Interrupts */ -#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */ -#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */ -#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */ -#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */ -#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */ -#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */ +#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */ +#define CAN_IT_RX_FIFO0_FULL ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */ +#define CAN_IT_RX_FIFO0_OVERRUN ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */ +#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */ +#define CAN_IT_RX_FIFO1_FULL ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */ +#define CAN_IT_RX_FIFO1_OVERRUN ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */ /* Operating Mode Interrupts */ -#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */ -#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */ +#define CAN_IT_WAKEUP ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */ +#define CAN_IT_SLEEP_ACK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */ /* Error Interrupts */ -#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */ -#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */ -#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */ -#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */ -#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */ +#define CAN_IT_ERROR_WARNING ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */ +#define CAN_IT_ERROR_PASSIVE ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */ +#define CAN_IT_BUSOFF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */ +#define CAN_IT_LAST_ERROR_CODE ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */ +#define CAN_IT_ERROR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */ /** * @} */ @@ -434,313 +498,228 @@ typedef struct * @} */ -/** @defgroup CAN_Private_Constants CAN Private Constants - * @{ - */ - -/* CAN intermediate shift values used for CAN flags */ -#define TSR_REGISTER_INDEX 0x5U -#define RF0R_REGISTER_INDEX 0x2U -#define RF1R_REGISTER_INDEX 0x4U -#define MSR_REGISTER_INDEX 0x1U -#define ESR_REGISTER_INDEX 0x3U - -/* CAN flags bits position into their respective register (TSR, RF0R, RF1R or MSR regsiters) */ -/* Transmit Flags */ -#define CAN_TSR_RQCP0_BIT_POSITION 0x00000000U -#define CAN_TSR_RQCP1_BIT_POSITION 0x00000008U -#define CAN_TSR_RQCP2_BIT_POSITION 0x00000010U -#define CAN_TSR_TXOK0_BIT_POSITION 0x00000001U -#define CAN_TSR_TXOK1_BIT_POSITION 0x00000009U -#define CAN_TSR_TXOK2_BIT_POSITION 0x00000011U -#define CAN_TSR_TME0_BIT_POSITION 0x0000001AU -#define CAN_TSR_TME1_BIT_POSITION 0x0000001BU -#define CAN_TSR_TME2_BIT_POSITION 0x0000001CU - -/* Receive Flags */ -#define CAN_RF0R_FF0_BIT_POSITION 0x00000003U -#define CAN_RF0R_FOV0_BIT_POSITION 0x00000004U - -#define CAN_RF1R_FF1_BIT_POSITION 0x00000003U -#define CAN_RF1R_FOV1_BIT_POSITION 0x00000004U - -/* Operating Mode Flags */ -#define CAN_MSR_WKU_BIT_POSITION 0x00000003U -#define CAN_MSR_SLAK_BIT_POSITION 0x00000001U -#define CAN_MSR_SLAKI_BIT_POSITION 0x00000004U - -/* Error Flags */ -#define CAN_ESR_EWG_BIT_POSITION 0x00000000U -#define CAN_ESR_EPV_BIT_POSITION 0x00000001U -#define CAN_ESR_BOF_BIT_POSITION 0x00000002U - -/* Mask used by macro to get/clear CAN flags*/ -#define CAN_FLAG_MASK 0x000000FFU - -/* Mailboxes definition */ -#define CAN_TXMAILBOX_0 ((uint8_t)0x00) -#define CAN_TXMAILBOX_1 ((uint8_t)0x01) -#define CAN_TXMAILBOX_2 ((uint8_t)0x02) -/** - * @} - */ - /* Exported macros -----------------------------------------------------------*/ /** @defgroup CAN_Exported_Macros CAN Exported Macros * @{ */ /** @brief Reset CAN handle state - * @param __HANDLE__: CAN handle. + * @param __HANDLE__ CAN handle. * @retval None */ #define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET) /** - * @brief Enable the specified CAN interrupts - * @param __HANDLE__: CAN handle. - * @param __INTERRUPT__: CAN Interrupt. - * This parameter can be one of the following values: - * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable - * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt - * @arg CAN_IT_FF0 : FIFO 0 full interrupt - * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt - * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt - * @arg CAN_IT_FF1 : FIFO 1 full interrupt - * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt - * @arg CAN_IT_WKU : Wake-up interrupt - * @arg CAN_IT_SLK : Sleep acknowledge interrupt - * @arg CAN_IT_EWG : Error warning interrupt - * @arg CAN_IT_EPV : Error passive interrupt - * @arg CAN_IT_BOF : Bus-off interrupt - * @arg CAN_IT_LEC : Last error code interrupt - * @arg CAN_IT_ERR : Error Interrupt - * @retval None. + * @brief Enable the specified CAN interrupts. + * @param __HANDLE__ CAN handle. + * @param __INTERRUPT__ CAN Interrupt sources to enable. + * This parameter can be any combination of @arg CAN_Interrupts + * @retval None */ #define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) /** - * @brief Disable the specified CAN interrupts - * @param __HANDLE__: CAN handle. - * @param __INTERRUPT__: CAN Interrupt. - * This parameter can be one of the following values: - * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable - * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt - * @arg CAN_IT_FF0 : FIFO 0 full interrupt - * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt - * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt - * @arg CAN_IT_FF1 : FIFO 1 full interrupt - * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt - * @arg CAN_IT_WKU : Wake-up interrupt - * @arg CAN_IT_SLK : Sleep acknowledge interrupt - * @arg CAN_IT_EWG : Error warning interrupt - * @arg CAN_IT_EPV : Error passive interrupt - * @arg CAN_IT_BOF : Bus-off interrupt - * @arg CAN_IT_LEC : Last error code interrupt - * @arg CAN_IT_ERR : Error Interrupt - * @retval None. + * @brief Disable the specified CAN interrupts. + * @param __HANDLE__ CAN handle. + * @param __INTERRUPT__ CAN Interrupt sources to disable. + * This parameter can be any combination of @arg CAN_Interrupts + * @retval None */ #define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) -/** - * @brief Return the number of pending received messages. - * @param __HANDLE__: CAN handle. - * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval The number of pending message. +/** @brief Check if the specified CAN interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the CAN Handle. + * @param __INTERRUPT__ specifies the CAN interrupt source to check. + * This parameter can be a value of @arg CAN_Interrupts + * @retval The state of __IT__ (TRUE or FALSE). */ -#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((uint8_t)((__HANDLE__)->Instance->RF0R & 0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U))) +#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__)) /** @brief Check whether the specified CAN flag is set or not. - * @param __HANDLE__: specifies the CAN Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg CAN_TSR_RQCP0: Request MailBox0 Flag - * @arg CAN_TSR_RQCP1: Request MailBox1 Flag - * @arg CAN_TSR_RQCP2: Request MailBox2 Flag - * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag - * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag - * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag - * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag - * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag - * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag - * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag - * @arg CAN_FLAG_FF0: FIFO 0 Full Flag - * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag - * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag - * @arg CAN_FLAG_FF1: FIFO 1 Full Flag - * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag - * @arg CAN_FLAG_WKU: Wake up Flag - * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag - * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag - * @arg CAN_FLAG_EWG: Error Warning Flag - * @arg CAN_FLAG_EPV: Error Passive Flag - * @arg CAN_FLAG_BOF: Bus-Off Flag - * @retval The new state of __FLAG__ (TRUE or FALSE). + * @param __HANDLE__ specifies the CAN Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of @arg CAN_flags + * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \ -((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK)))) + ((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U) /** @brief Clear the specified CAN pending flag. - * @param __HANDLE__: specifies the CAN Handle. - * @param __FLAG__: specifies the flag to check. + * @param __HANDLE__ specifies the CAN Handle. + * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: - * @arg CAN_TSR_RQCP0: Request MailBox0 Flag - * @arg CAN_TSR_RQCP1: Request MailBox1 Flag - * @arg CAN_TSR_RQCP2: Request MailBox2 Flag - * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag - * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag - * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag - * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag - * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag - * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag - * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag - * @arg CAN_FLAG_FF0: FIFO 0 Full Flag - * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag - * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag - * @arg CAN_FLAG_FF1: FIFO 1 Full Flag - * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag - * @arg CAN_FLAG_WKU: Wake up Flag - * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -((((__FLAG__) >> 8U) == TSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == RF0R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == RF1R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8U) == MSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U) - -/** @brief Check if the specified CAN interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the CAN Handle. - * @param __INTERRUPT__: specifies the CAN interrupt source to check. - * This parameter can be one of the following values: - * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable - * @arg CAN_IT_FMP0: FIFO 0 message pending interrupt - * @arg CAN_IT_FF0 : FIFO 0 full interrupt - * @arg CAN_IT_FOV0: FIFO 0 overrun interrupt - * @arg CAN_IT_FMP1: FIFO 1 message pending interrupt - * @arg CAN_IT_FF1 : FIFO 1 full interrupt - * @arg CAN_IT_FOV1: FIFO 1 overrun interrupt - * @arg CAN_IT_WKU : Wake-up interrupt - * @arg CAN_IT_SLK : Sleep acknowledge interrupt - * @arg CAN_IT_EWG : Error warning interrupt - * @arg CAN_IT_EPV : Error passive interrupt - * @arg CAN_IT_BOF : Bus-off interrupt - * @arg CAN_IT_LEC : Last error code interrupt - * @arg CAN_IT_ERR : Error Interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** - * @brief Check the transmission status of a CAN Frame. - * @param __HANDLE__: specifies the CAN Handle. - * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. - * @retval The new status of transmission (TRUE or FALSE). - */ -#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\ -(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\ - ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\ - ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2))) - -/** - * @brief Release the specified receive FIFO. - * @param __HANDLE__: CAN handle. - * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval None. - */ -#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1)) - -/** - * @brief Cancel a transmit request. - * @param __HANDLE__: specifies the CAN Handle. - * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. - * @retval None. - */ -#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\ -(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\ - ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\ - ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2)) - -/** - * @brief Enable or disables the DBG Freeze for CAN. - * @param __HANDLE__: specifies the CAN Handle. - * @param __NEWSTATE__: new state of the CAN peripheral. - * This parameter can be: ENABLE (CAN reception/transmission is frozen - * during debug. Reception FIFOs can still be accessed/controlled normally) - * or DISABLE (CAN is working during debug). + * @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag + * @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag + * @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag + * @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag + * @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag + * @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag + * @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag + * @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag + * @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag + * @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag + * @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag + * @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag + * @arg CAN_FLAG_FF0: RX FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: RX FIFO 0 Overrun Flag + * @arg CAN_FLAG_FF1: RX FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: RX FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKUI: Wake up Interrupt Flag + * @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag * @retval None */ -#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \ -((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF)) +#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + ((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \ + (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U) /** - * @} - */ - -/* Include CAN HAL Extension module */ -#include "stm32f1xx_hal_can_ex.h" + * @} + */ /* Exported functions --------------------------------------------------------*/ -/** @addtogroup CAN_Exported_Functions +/** @addtogroup CAN_Exported_Functions CAN Exported Functions * @{ */ -/** @addtogroup CAN_Exported_Functions_Group1 - * @brief Initialization and Configuration functions - * @{ - */ +/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + /* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan); -HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig); -HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan); -void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan); -void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan); -/** - * @} - */ +HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan); +void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan); +void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan); -/** @addtogroup CAN_Exported_Functions_Group2 - * @brief I/O operation functions - * @{ - */ -/* I/O operation functions *****************************************************/ -HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout); -HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan); -HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout); -HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber); -HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan); +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions + * @brief Configuration functions + * @{ + */ + +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig); + +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group3 Control functions + * @brief Control functions + * @{ + */ + +/* Control functions **********************************************************/ +HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan); HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan); -void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan); -void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan); -void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan); -void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan); -/** - * @} - */ +uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox); +HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes); +uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan); +uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes); +uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox); +HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]); +uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo); -/** @addtogroup CAN_Exported_Functions_Group3 - * @brief CAN Peripheral State functions +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management + * @brief Interrupts management + * @{ + */ +/* Interrupts management ******************************************************/ +HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs); +HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs); +void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan); + +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group5 Callback functions + * @brief Callback functions + * @{ + */ +/* Callbacks functions ********************************************************/ + +void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan); +void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan); + +/** + * @} + */ + +/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions + * @brief CAN Peripheral State functions + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan); +uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan); +HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CAN_Private_Types CAN Private Types * @{ */ -/* Peripheral State and Error functions ***************************************/ -uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan); -HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); + /** * @} */ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CAN_Private_Variables CAN Private Variables + * @{ + */ + /** * @} */ -/* Private macros --------------------------------------------------------*/ -/** @defgroup CAN_Private_Macros CAN Private Macros +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CAN_Private_Constants CAN Private Constants + * @{ + */ +#define CAN_FLAG_MASK (0x000000FFU) +/** + * @} + */ + +/* Private Macros -----------------------------------------------------------*/ +/** @defgroup CAN_Private_Macros CAN Private Macros * @{ */ @@ -748,49 +727,73 @@ HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); ((MODE) == CAN_MODE_LOOPBACK)|| \ ((MODE) == CAN_MODE_SILENT) || \ ((MODE) == CAN_MODE_SILENT_LOOPBACK)) -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \ +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ)) -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ) -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ) +#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \ + ((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \ + ((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \ + ((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \ + ((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \ + ((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \ + ((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \ + ((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ)) +#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \ + ((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \ + ((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \ + ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ)) #define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U)) - +#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU) +#if defined(CAN2) +#define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U) +#endif +#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U) #define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \ ((MODE) == CAN_FILTERMODE_IDLIST)) #define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \ ((SCALE) == CAN_FILTERSCALE_32BIT)) +#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \ + ((ACTIVATION) == CAN_FILTER_ENABLE)) #define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \ ((FIFO) == CAN_FILTER_FIFO1)) -#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U) - -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= 0x00007FFU) +#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \ + ((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \ + ((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 )) +#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2)) +#define IS_CAN_STDID(STDID) ((STDID) <= 0x7FFU) #define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU) -#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) - +#define IS_CAN_DLC(DLC) ((DLC) <= 8U) #define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \ ((IDTYPE) == CAN_ID_EXT)) #define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) +#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1)) +#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY | CAN_IT_RX_FIFO0_MSG_PENDING | \ + CAN_IT_RX_FIFO0_FULL | CAN_IT_RX_FIFO0_OVERRUN | \ + CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL | \ + CAN_IT_RX_FIFO1_OVERRUN | CAN_IT_WAKEUP | \ + CAN_IT_SLEEP_ACK | CAN_IT_ERROR_WARNING | \ + CAN_IT_ERROR_PASSIVE | CAN_IT_BUSOFF | \ + CAN_IT_LAST_ERROR_CODE | CAN_IT_ERROR)) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ /** * @} */ + +#endif /* CAN1 */ /** * @} */ -/** - * @} - */ - -#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ - #ifdef __cplusplus } #endif -#endif /* __STM32F1xx_HAL_CAN_H */ +#endif /* STM32F1xx_HAL_CAN_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h index 9942a81976..37005f120c 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_conf_template.h @@ -53,6 +53,7 @@ extern "C" { #define HAL_MODULE_ENABLED #define HAL_ADC_MODULE_ENABLED #define HAL_CAN_MODULE_ENABLED +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ #define HAL_CEC_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED #define HAL_CRC_MODULE_ENABLED @@ -249,6 +250,10 @@ extern "C" { #include "stm32f1xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32f1xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + #ifdef HAL_CEC_MODULE_ENABLED #include "stm32f1xx_hal_cec.h" #endif /* HAL_CEC_MODULE_ENABLED */ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h index 09cb9604f5..b5e6f74bdf 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h @@ -74,8 +74,8 @@ typedef enum /* Exported macro ------------------------------------------------------------*/ #define HAL_MAX_DELAY 0xFFFFFFFFU -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET) +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) #define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ do{ \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h index ea8aa92611..aa5ac316d7 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h @@ -458,8 +458,9 @@ typedef struct /** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity * @{ */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input */ /** * @} */ @@ -937,8 +938,9 @@ typedef struct ((CHANNEL) == TIM_CHANNEL_2) || \ ((CHANNEL) == TIM_CHANNEL_3)) -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \ - ((POLARITY) == TIM_ICPOLARITY_FALLING)) +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) #define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \ diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h index f03a74a1aa..4a2b69078f 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h @@ -1602,7 +1602,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void) #if defined(RCC_CFGR2_PREDIV1) return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1)); #else - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE)); + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos); #endif /*RCC_CFGR2_PREDIV1*/ } diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h index a2b7202d60..8c84a250eb 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h @@ -1057,7 +1057,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) */ __STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) { - SET_BIT(TIMx->CR1, TIM_CR1_UDIS); + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); } /** @@ -1068,7 +1068,7 @@ __STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) */ __STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) { - CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); } /** @@ -1148,6 +1148,9 @@ __STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) * @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to * check whether or not the counter mode selection feature is supported * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n * CR1 CMS LL_TIM_SetCounterMode * @param TIMx Timer instance diff --git a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Release_Notes.html b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Release_Notes.html index 0c01dc529c..91c3deb602 100644 --- a/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Release_Notes.html +++ b/bsp/stm32/libraries/STM32F1xx_HAL/STM32F1xx_HAL_Driver/Release_Notes.html @@ -920,7 +920,26 @@ ul

Update History

-

V1.1.2 / 09-March-2018