rt-thread/bsp/c28x/libraries/tms320f28379d/common/include/F2837xD_EPwm_defines.h

343 lines
6.9 KiB
C
Raw Normal View History

//###########################################################################
//
// FILE: F2837xD_EPwm_defines.h
//
// TITLE: #defines used in EPwm examples
//
//###########################################################################
// $TI Release: F2837xD Support Library v3.05.00.00 $
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
// $Copyright:
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################
#ifndef F2837xD_EPWM_DEFINES_H
#define F2837xD_EPWM_DEFINES_H
#ifdef __cplusplus
extern "C" {
#endif
//
// Defines
//
//
// TBCTL (Time-Base Control)
//
//
// CTRMODE bits
//
#define TB_COUNT_UP 0x0
#define TB_COUNT_DOWN 0x1
#define TB_COUNT_UPDOWN 0x2
#define TB_FREEZE 0x3
//
// PHSEN bit
//
#define TB_DISABLE 0x0
#define TB_ENABLE 0x1
//
// PRDLD bit
//
#define TB_SHADOW 0x0
#define TB_IMMEDIATE 0x1
//
// SYNCOSEL bits
//
#define TB_SYNC_IN 0x0
#define TB_CTR_ZERO 0x1
#define TB_CTR_CMPB 0x2
#define TB_SYNC_DISABLE 0x3
//
// HSPCLKDIV and CLKDIV bits
//
#define TB_DIV1 0x0
#define TB_DIV2 0x1
#define TB_DIV4 0x2
//
// PHSDIR bit
//
#define TB_DOWN 0x0
#define TB_UP 0x1
//
// CMPCTL (Compare Control)
//
//
// LOADAMODE and LOADBMODE bits
//
#define CC_CTR_ZERO 0x0
#define CC_CTR_PRD 0x1
#define CC_CTR_ZERO_PRD 0x2
#define CC_LD_DISABLE 0x3
//
// SHDWAMODE and SHDWBMODE bits
//
#define CC_SHADOW 0x0
#define CC_IMMEDIATE 0x1
//
// AQCTLA and AQCTLB (Action Qualifier Control)
//
//
// ZRO, PRD, CAU, CAD, CBU, CBD bits
//
#define AQ_NO_ACTION 0x0
#define AQ_CLEAR 0x1
#define AQ_SET 0x2
#define AQ_TOGGLE 0x3
//
// DBCTL (Dead-Band Control)
//
//
// OUT MODE bits
//
#define DB_DISABLE 0x0
#define DBB_ENABLE 0x1
#define DBA_ENABLE 0x2
#define DB_FULL_ENABLE 0x3
//
// POLSEL bits
//
#define DB_ACTV_HI 0x0
#define DB_ACTV_LOC 0x1
#define DB_ACTV_HIC 0x2
#define DB_ACTV_LO 0x3
//
// IN MODE
//
#define DBA_ALL 0x0
#define DBB_RED_DBA_FED 0x1
#define DBA_RED_DBB_FED 0x2
#define DBB_ALL 0x3
//
// CHPCTL (chopper control)
//
//
// CHPEN bit
//
#define CHP_DISABLE 0x0
#define CHP_ENABLE 0x1
//
// CHPFREQ bits
//
#define CHP_DIV1 0x0
#define CHP_DIV2 0x1
#define CHP_DIV3 0x2
#define CHP_DIV4 0x3
#define CHP_DIV5 0x4
#define CHP_DIV6 0x5
#define CHP_DIV7 0x6
#define CHP_DIV8 0x7
//
// CHPDUTY bits
//
#define CHP1_8TH 0x0
#define CHP2_8TH 0x1
#define CHP3_8TH 0x2
#define CHP4_8TH 0x3
#define CHP5_8TH 0x4
#define CHP6_8TH 0x5
#define CHP7_8TH 0x6
//
// TZSEL (Trip Zone Select)
//
//
// CBCn and OSHTn bits
//
#define TZ_DISABLE 0x0
#define TZ_ENABLE 0x1
//
// TZCTL (Trip Zone Control)
//
//
// TZA and TZB bits
//
#define TZ_HIZ 0x0
#define TZ_FORCE_HI 0x1
#define TZ_FORCE_LO 0x2
#define TZ_NO_CHANGE 0x3
//
// TZDCSEL (Trip Zone Digital Compare)
//
//
// DCAEVT1, DCAEVT2, DCBEVT1, DCBEVT2 bits
//
#define TZ_EVT_DISABLE 0x0
#define TZ_DCAH_LOW 0x1
#define TZ_DCAH_HI 0x2
#define TZ_DCAL_LOW 0x3
#define TZ_DCAL_HI 0x4
#define TZ_DCAL_HI_DCAH_LOW 0x5
#define TZ_DCBH_LOW 0x1
#define TZ_DCBH_HI 0x2
#define TZ_DCBL_LOW 0x3
#define TZ_DCBL_HI 0x4
#define TZ_DCBL_HI_DCBH_LOW 0x5
//
// ETSEL (Event Trigger Select)
//
#define ET_DCAEVT1SOC 0x0
#define ET_CTR_ZERO 0x1
#define ET_CTR_PRD 0x2
#define ET_CTR_PRDZERO 0x3
#define ET_CTRU_CMPA 0x4
#define ET_CTRD_CMPA 0x5
#define ET_CTRU_CMPB 0x6
#define ET_CTRD_CMPB 0x7
//
// ETPS (Event Trigger Pre-scale)
//
//
// INTPRD, SOCAPRD, SOCBPRD bits
//
#define ET_DISABLE 0x0
#define ET_1ST 0x1
#define ET_2ND 0x2
#define ET_3RD 0x3
//
// HRPWM (High Resolution PWM)
//
//
// HRCNFG
//
#define HR_DISABLE 0x0
#define HR_REP 0x1
#define HR_FEP 0x2
#define HR_BEP 0x3
#define HR_CMP 0x0
#define HR_PHS 0x1
#define HR_CTR_ZERO 0x0
#define HR_CTR_PRD 0x1
#define HR_CTR_ZERO_PRD 0x2
#define HR_NORM_B 0x0
#define HR_INVERT_B 0x1
//
// DC (Digital Compare)
//
//
// DCTRIPSEL
//
#define DC_TZ1 0x0
#define DC_TZ2 0x1
#define DC_TZ3 0x2
#define DC_TRIPIN1 0x0
#define DC_TRIPIN2 0x1
#define DC_TRIPIN3 0x2
#define DC_TRIPIN4 0x3
#define DC_TRIPIN5 0x4
#define DC_TRIPIN6 0x5
#define DC_TRIPIN7 0x6
#define DC_TRIPIN8 0x7
#define DC_TRIPIN9 0x8
#define DC_TRIPIN10 0x9
#define DC_TRIPIN11 0xA
#define DC_TRIPIN12 0xB
// Reserved 0xC
#define DC_TRIPIN14 0xD
#define DC_TRIPIN15 0xE
#define DC_COMBINATION 0xF
//
// DCFCTL
//
#define DC_SRC_DCAEVT1 0x0
#define DC_SRC_DCAEVT2 0x1
#define DC_SRC_DCBEVT1 0x2
#define DC_SRC_DCBEVT2 0x3
#define DC_PULSESEL_PRD 0x0
#define DC_PULSESEL_ZERO 0x1
#define DC_PULSESEL_ZERO_PRD 0x2
#define DC_BLANK_DISABLE 0x0
#define DC_BLANK_ENABLE 0x1
#define DC_BLANK_NOTINV 0x0
#define DC_BLANK_INV 0x1
//
//DCACTL/DCBCTL
//
#define DC_EVT1 0x0
#define DC_EVT2 0x0
#define DC_EVT_FLT 0x1
#define DC_EVT_SYNC 0x0
#define DC_EVT_ASYNC 0x1
#define DC_SOC_DISABLE 0x0
#define DC_SOC_ENABLE 0x1
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif // - end of F2837xD_EPWM_DEFINES_H
//
// End of file
//