libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/rm48x50/HALCoGen/include/reg_crc.h

97 lines
4.6 KiB
C
Raw Normal View History

add rm48x50 bsp and libcpu We currently only support building with CCS and SCons is not using. bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file. You may need to regenerate the source file as you like, providing that: 1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The channel 5 in enabled and connected to IRQ. 2, RTI driver is enabled and compare3 source is selected to counter1 and the compare3 will generate tick in the period of 10ms. This value is coresponding with RT_TICK_PER_SECOND in rtconfig.h. In CCS, you need to create a new CCS project and create link folders pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember to add the include path to the Build Properties.
2013-05-24 10:04:51 +08:00
/** @file reg_crc.h
* @brief CRC Register Layer Header File
rm48x50: update HALCoGen file
2013-05-29 16:42:26 +08:00
* @date 29.May.2013
* @version 03.05.02
add rm48x50 bsp and libcpu We currently only support building with CCS and SCons is not using. bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file. You may need to regenerate the source file as you like, providing that: 1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The channel 5 in enabled and connected to IRQ. 2, RTI driver is enabled and compare3 source is selected to counter1 and the compare3 will generate tick in the period of 10ms. This value is coresponding with RT_TICK_PER_SECOND in rtconfig.h. In CCS, you need to create a new CCS project and create link folders pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember to add the include path to the Build Properties.
2013-05-24 10:04:51 +08:00
*
* This file contains:
* - Definitions
* - Types
* - Interface Prototypes
* .
* which are relevant for the CRC driver.
*/
/* (c) Texas Instruments 2009-2013, All rights reserved. */
#ifndef __REG_CRC_H__
#define __REG_CRC_H__
#include "sys_common.h"
/* USER CODE BEGIN (0) */
/* USER CODE END */
/* Crc Register Frame Definition */
/** @struct crcBase
* @brief CRC Register Frame Definition
*
* This type is used to access the CRC Registers.
*/
/** @typedef crcBASE_t
* @brief CRC Register Frame Type Definition
*
* This type is used to access the CRC Registers.
*/
typedef volatile struct crcBase
{
uint32 CTRL0; /**< 0x0000: Global Control Register 0 >**/
uint32 rsvd1; /**< 0x0004: reserved >**/
uint32 CTRL1; /**< 0x0008: Global Control Register 1 >**/
uint32 rsvd2; /**< 0x000C: reserved >**/
uint32 CTRL2; /**< 0x0010: Global Control Register 2 >**/
uint32 rsvd3; /**< 0x0014: reserved >**/
uint32 INTS; /**< 0x0018: Interrupt Enable Set Register >**/
uint32 rsvd4; /**< 0x001C: reserved >**/
uint32 INTR; /**< 0x0020: Interrupt Enable Reset Register >**/
uint32 rsvd5; /**< 0x0024: reserved >**/
uint32 STATUS; /**< 0x0028: Interrupt Status Register >**/
uint32 rsvd6; /**< 0x002C: reserved >**/
uint32 INT_OFFSET_REG; /**< 0x0030: Interrupt Offset >**/
uint32 rsvd7; /**< 0x0034: reserved >**/
uint32 BUSY; /**< 0x0038: CRC Busy Register >**/
uint32 rsvd8; /**< 0x003C: reserved >**/
uint32 PCOUNT_REG1; /**< 0x0040: Pattern Counter Preload Register1 >**/
uint32 SCOUNT_REG1; /**< 0x0044: Sector Counter Preload Register1 >**/
uint32 CURSEC_REG1; /**< 0x0048: Current Sector Register 1 >**/
uint32 WDTOPLD1; /**< 0x004C: Channel 1 Watchdog Timeout Preload Register A >**/
uint32 BCTOPLD1; /**< 0x0050: Channel 1 Block Complete Timeout Preload Register B >**/
uint32 rsvd9[3]; /**< 0x0054: reserved >**/
uint32 PSA_SIGREGL1; /**< 0x0060: Channel 1 PSA signature low register >**/
uint32 PSA_SIGREGH1; /**< 0x0064: Channel 1 PSA signature high register >**/
uint32 REGL1; /**< 0x0068: Channel 1 CRC value low register >**/
uint32 REGH1; /**< 0x006C: Channel 1 CRC value high register >**/
uint32 PSA_SECSIGREGL1; /**< 0x0070: Channel 1 PSA sector signature low register >**/
uint32 PSA_SECSIGREGH1; /**< 0x0074: Channel 1 PSA sector signature high register >**/
uint32 RAW_DATAREGL1; /**< 0x0078: Channel 1 Raw Data Low Register >**/
uint32 RAW_DATAREGH1; /**< 0x007C: Channel 1 Raw Data High Register >**/
uint32 PCOUNT_REG2; /**< 0x0080: CRC Pattern Counter Preload Register2 >**/
uint32 SCOUNT_REG2; /**< 0x0084: Sector Counter Preload Register2 >**/
uint32 CURSEC_REG2; /**< 0x0088: Current Sector Register 2>**/
uint32 WDTOPLD2; /**< 0x008C: Channel 2 Watchdog Timeout Preload Register A >**/
uint32 BCTOPLD2; /**< 0x0090: Channel 2 Block Complete Timeout Preload Register B >**/
uint32 rsvd10[3]; /**< 0x0094: reserved >**/
uint32 PSA_SIGREGL2; /**< 0x00A0: Channel 2 PSA signature low register >**/
uint32 PSA_SIGREGH2; /**< 0x00A8: Channel 2 PSA signature high register >**/
uint32 REGL2; /**< 0x00AC: Channel 2 CRC value low register >**/
uint32 REGH2; /**< 0x00AC: Channel 2 CRC value high register >**/
uint32 PSA_SECSIGREGL2; /**< 0x00B0: Channel 2 PSA sector signature low register >**/
uint32 PSA_SECSIGREGH2; /**< 0x00B4: Channel 2 PSA sector signature high register >**/
uint32 RAW_DATAREGL2; /**< 0x00B8: Channel 2 Raw Data Low Register >**/
uint32 RAW_DATAREGH2; /**< 0x00BC: Channel 2 Raw Data High Register >**/
}crcBASE_t;
/** @def crcREG
* @brief CRC Register Frame Pointer
*
* This pointer is used by the CRC driver to access the CRC registers.
*/
#define crcREG ((crcBASE_t *)0xFE000000U)
/* USER CODE BEGIN (1) */
/* USER CODE END */
#endif