libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/lm4f232/Libraries/inc/hw_can.h

757 lines
36 KiB
C
Raw Normal View History

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1817 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-29 16:06:46 +08:00
//*****************************************************************************
//
// hw_can.h - Defines and macros used when accessing the CAN controllers.
//
// Copyright (c) 2006-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
update Stellaris Peripheral Driver Library to r8264. git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1869 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-12-23 11:20:26 +08:00
// This is part of revision 8264 of the Stellaris Firmware Development Package.
git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1817 bbd45198-f89e-11dd-88c7-29a3b14d5316
2011-11-29 16:06:46 +08:00
//
//*****************************************************************************
#ifndef __HW_CAN_H__
#define __HW_CAN_H__
//*****************************************************************************
//
// The following are defines for the CAN register offsets.
//
//*****************************************************************************
#define CAN_O_CTL 0x00000000 // CAN Control
#define CAN_O_STS 0x00000004 // CAN Status
#define CAN_O_ERR 0x00000008 // CAN Error Counter
#define CAN_O_BIT 0x0000000C // CAN Bit Timing
#define CAN_O_INT 0x00000010 // CAN Interrupt
#define CAN_O_TST 0x00000014 // CAN Test
#define CAN_O_BRPE 0x00000018 // CAN Baud Rate Prescaler
// Extension
#define CAN_O_IF1CRQ 0x00000020 // CAN IF1 Command Request
#define CAN_O_IF1CMSK 0x00000024 // CAN IF1 Command Mask
#define CAN_O_IF1MSK1 0x00000028 // CAN IF1 Mask 1
#define CAN_O_IF1MSK2 0x0000002C // CAN IF1 Mask 2
#define CAN_O_IF1ARB1 0x00000030 // CAN IF1 Arbitration 1
#define CAN_O_IF1ARB2 0x00000034 // CAN IF1 Arbitration 2
#define CAN_O_IF1MCTL 0x00000038 // CAN IF1 Message Control
#define CAN_O_IF1DA1 0x0000003C // CAN IF1 Data A1
#define CAN_O_IF1DA2 0x00000040 // CAN IF1 Data A2
#define CAN_O_IF1DB1 0x00000044 // CAN IF1 Data B1
#define CAN_O_IF1DB2 0x00000048 // CAN IF1 Data B2
#define CAN_O_IF2CRQ 0x00000080 // CAN IF2 Command Request
#define CAN_O_IF2CMSK 0x00000084 // CAN IF2 Command Mask
#define CAN_O_IF2MSK1 0x00000088 // CAN IF2 Mask 1
#define CAN_O_IF2MSK2 0x0000008C // CAN IF2 Mask 2
#define CAN_O_IF2ARB1 0x00000090 // CAN IF2 Arbitration 1
#define CAN_O_IF2ARB2 0x00000094 // CAN IF2 Arbitration 2
#define CAN_O_IF2MCTL 0x00000098 // CAN IF2 Message Control
#define CAN_O_IF2DA1 0x0000009C // CAN IF2 Data A1
#define CAN_O_IF2DA2 0x000000A0 // CAN IF2 Data A2
#define CAN_O_IF2DB1 0x000000A4 // CAN IF2 Data B1
#define CAN_O_IF2DB2 0x000000A8 // CAN IF2 Data B2
#define CAN_O_TXRQ1 0x00000100 // CAN Transmission Request 1
#define CAN_O_TXRQ2 0x00000104 // CAN Transmission Request 2
#define CAN_O_NWDA1 0x00000120 // CAN New Data 1
#define CAN_O_NWDA2 0x00000124 // CAN New Data 2
#define CAN_O_MSG1INT 0x00000140 // CAN Message 1 Interrupt Pending
#define CAN_O_MSG2INT 0x00000144 // CAN Message 2 Interrupt Pending
#define CAN_O_MSG1VAL 0x00000160 // CAN Message 1 Valid
#define CAN_O_MSG2VAL 0x00000164 // CAN Message 2 Valid
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_CTL register.
//
//*****************************************************************************
#define CAN_CTL_TEST 0x00000080 // Test Mode Enable
#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable
#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission
#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable
#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable
#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable
#define CAN_CTL_INIT 0x00000001 // Initialization
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_STS register.
//
//*****************************************************************************
#define CAN_STS_BOFF 0x00000080 // Bus-Off Status
#define CAN_STS_EWARN 0x00000040 // Warning Status
#define CAN_STS_EPASS 0x00000020 // Error Passive
#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully
#define CAN_STS_TXOK 0x00000008 // Transmitted a Message
// Successfully
#define CAN_STS_LEC_M 0x00000007 // Last Error Code
#define CAN_STS_LEC_NONE 0x00000000 // No Error
#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error
#define CAN_STS_LEC_FORM 0x00000002 // Format Error
#define CAN_STS_LEC_ACK 0x00000003 // ACK Error
#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error
#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error
#define CAN_STS_LEC_CRC 0x00000006 // CRC Error
#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_ERR register.
//
//*****************************************************************************
#define CAN_ERR_RP 0x00008000 // Received Error Passive
#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter
#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter
#define CAN_ERR_REC_S 8
#define CAN_ERR_TEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BIT register.
//
//*****************************************************************************
#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point
#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point
#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width
#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler
#define CAN_BIT_TSEG2_S 12
#define CAN_BIT_TSEG1_S 8
#define CAN_BIT_SJW_S 6
#define CAN_BIT_BRP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_INT register.
//
//*****************************************************************************
#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier
#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending
#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TST register.
//
//*****************************************************************************
#define CAN_TST_RX 0x00000080 // Receive Observation
#define CAN_TST_TX_M 0x00000060 // Transmit Control
#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control
#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point
#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low
#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High
#define CAN_TST_LBACK 0x00000010 // Loopback Mode
#define CAN_TST_SILENT 0x00000008 // Silent Mode
#define CAN_TST_BASIC 0x00000004 // Basic Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BRPE register.
//
//*****************************************************************************
#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension
#define CAN_BRPE_BRPE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CRQ register.
//
//*****************************************************************************
#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF1CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number;
// it is interpreted as 0x20, or
// object 32
#define CAN_IF1CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CMSK register.
//
//*****************************************************************************
#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK1 register.
//
//*****************************************************************************
#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF1MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK2 register.
//
//*****************************************************************************
#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF1MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB1 register.
//
//*****************************************************************************
#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF1ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB2 register.
//
//*****************************************************************************
#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF1ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MCTL register.
//
//*****************************************************************************
#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF1MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA1 register.
//
//*****************************************************************************
#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA2 register.
//
//*****************************************************************************
#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB1 register.
//
//*****************************************************************************
#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB2 register.
//
//*****************************************************************************
#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CRQ register.
//
//*****************************************************************************
#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF2CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number;
// it is interpreted as 0x20, or
// object 32
#define CAN_IF2CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CMSK register.
//
//*****************************************************************************
#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK1 register.
//
//*****************************************************************************
#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF2MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK2 register.
//
//*****************************************************************************
#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF2MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB1 register.
//
//*****************************************************************************
#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF2ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB2 register.
//
//*****************************************************************************
#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF2ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MCTL register.
//
//*****************************************************************************
#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF2MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA1 register.
//
//*****************************************************************************
#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA2 register.
//
//*****************************************************************************
#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB1 register.
//
//*****************************************************************************
#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB2 register.
//
//*****************************************************************************
#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ1 register.
//
//*****************************************************************************
#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ1_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ2 register.
//
//*****************************************************************************
#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ2_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA1 register.
//
//*****************************************************************************
#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA1_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA2 register.
//
//*****************************************************************************
#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA2_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1INT register.
//
//*****************************************************************************
#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG1INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2INT register.
//
//*****************************************************************************
#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG2INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1VAL register.
//
//*****************************************************************************
#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG1VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2VAL register.
//
//*****************************************************************************
#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG2VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the CAN register offsets.
//
//*****************************************************************************
#define CAN_O_MSGINT1 0x00000140 // Intr. Pending in Msg Obj 1 reg
#define CAN_O_MSGINT2 0x00000144 // Intr. Pending in Msg Obj 2 reg
#define CAN_O_MSGVAL1 0x00000160 // Message Valid in Msg Obj 1 reg
#define CAN_O_MSGVAL2 0x00000164 // Message Valid in Msg Obj 2 reg
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_STS
// register.
//
//*****************************************************************************
#define CAN_STS_LEC_MSK 0x00000007 // Last Error Code
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_ERR
// register.
//
//*****************************************************************************
#define CAN_ERR_REC_MASK 0x00007F00 // Receive error counter status
#define CAN_ERR_TEC_MASK 0x000000FF // Transmit error counter status
#define CAN_ERR_REC_SHIFT 8 // Receive error counter bit pos
#define CAN_ERR_TEC_SHIFT 0 // Transmit error counter bit pos
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_BIT
// register.
//
//*****************************************************************************
#define CAN_BIT_TSEG2 0x00007000 // Time segment after sample point
#define CAN_BIT_TSEG1 0x00000F00 // Time segment before sample point
#define CAN_BIT_SJW 0x000000C0 // (Re)Synchronization jump width
#define CAN_BIT_BRP 0x0000003F // Baud rate prescaler
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_INT
// register.
//
//*****************************************************************************
#define CAN_INT_INTID_MSK 0x0000FFFF // Interrupt Identifier
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_TST
// register.
//
//*****************************************************************************
#define CAN_TST_TX_MSK 0x00000060 // Overide control of CAN_TX pin
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_BRPE
// register.
//
//*****************************************************************************
#define CAN_BRPE_BRPE 0x0000000F // Baud rate prescaler extension
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_TXRQ1
// register.
//
//*****************************************************************************
#define CAN_TXRQ1_TXRQST 0x0000FFFF // Transmission Request Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_TXRQ2
// register.
//
//*****************************************************************************
#define CAN_TXRQ2_TXRQST 0x0000FFFF // Transmission Request Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_NWDA1
// register.
//
//*****************************************************************************
#define CAN_NWDA1_NEWDATA 0x0000FFFF // New Data Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_NWDA2
// register.
//
//*****************************************************************************
#define CAN_NWDA2_NEWDATA 0x0000FFFF // New Data Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_MSGINT1
// register.
//
//*****************************************************************************
#define CAN_MSGINT1_INTPND 0x0000FFFF // Interrupt Pending Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_MSGINT2
// register.
//
//*****************************************************************************
#define CAN_MSGINT2_INTPND 0x0000FFFF // Interrupt Pending Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_MSGVAL1
// register.
//
//*****************************************************************************
#define CAN_MSGVAL1_MSGVAL 0x0000FFFF // Message Valid Bits
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_O_MSGVAL2
// register.
//
//*****************************************************************************
#define CAN_MSGVAL2_MSGVAL 0x0000FFFF // Message Valid Bits
//*****************************************************************************
//
// The following are deprecated defines for the reset values of the can
// registers.
//
//*****************************************************************************
#define CAN_RV_IF1MSK2 0x0000FFFF
#define CAN_RV_IF1MSK1 0x0000FFFF
#define CAN_RV_IF2MSK1 0x0000FFFF
#define CAN_RV_IF2MSK2 0x0000FFFF
#define CAN_RV_BIT 0x00002301
#define CAN_RV_CTL 0x00000001
#define CAN_RV_IF1CRQ 0x00000001
#define CAN_RV_IF2CRQ 0x00000001
#define CAN_RV_TXRQ2 0x00000000
#define CAN_RV_IF2DB1 0x00000000
#define CAN_RV_INT 0x00000000
#define CAN_RV_IF1DB2 0x00000000
#define CAN_RV_BRPE 0x00000000
#define CAN_RV_IF2DA2 0x00000000
#define CAN_RV_MSGVAL2 0x00000000
#define CAN_RV_TXRQ1 0x00000000
#define CAN_RV_IF1MCTL 0x00000000
#define CAN_RV_IF1DB1 0x00000000
#define CAN_RV_STS 0x00000000
#define CAN_RV_MSGINT1 0x00000000
#define CAN_RV_IF1DA2 0x00000000
#define CAN_RV_TST 0x00000000
#define CAN_RV_IF1ARB1 0x00000000
#define CAN_RV_IF1ARB2 0x00000000
#define CAN_RV_NWDA2 0x00000000
#define CAN_RV_IF2CMSK 0x00000000
#define CAN_RV_NWDA1 0x00000000
#define CAN_RV_IF1DA1 0x00000000
#define CAN_RV_IF2DA1 0x00000000
#define CAN_RV_IF2MCTL 0x00000000
#define CAN_RV_MSGVAL1 0x00000000
#define CAN_RV_IF1CMSK 0x00000000
#define CAN_RV_ERR 0x00000000
#define CAN_RV_IF2ARB2 0x00000000
#define CAN_RV_MSGINT2 0x00000000
#define CAN_RV_IF2ARB1 0x00000000
#define CAN_RV_IF2DB2 0x00000000
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1CRQ
// and CAN_IF1CRQ registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFCRQ_BUSY 0x00008000 // Busy flag status
#define CAN_IFCRQ_MNUM_MSK 0x0000003F // Message Number
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1CMSK
// and CAN_IF2CMSK registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFCMSK_WRNRD 0x00000080 // Write, not Read
#define CAN_IFCMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IFCMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IFCMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IFCMSK_CLRINTPND 0x00000008 // Clear interrupt pending Bit
#define CAN_IFCMSK_TXRQST 0x00000004 // Access Tx request bit (WRNRD=1)
#define CAN_IFCMSK_NEWDAT 0x00000004 // Access New Data bit (WRNRD=0)
#define CAN_IFCMSK_DATAA 0x00000002 // DataA access - bytes 0 to 3
#define CAN_IFCMSK_DATAB 0x00000001 // DataB access - bytes 4 to 7
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1MSK1
// and CAN_IF2MSK1 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFMSK1_MSK 0x0000FFFF // Identifier Mask
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1MSK2
// and CAN_IF2MSK2 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFMSK2_MXTD 0x00008000 // Mask extended identifier
#define CAN_IFMSK2_MDIR 0x00004000 // Mask message direction
#define CAN_IFMSK2_MSK 0x00001FFF // Mask identifier
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1ARB1
// and CAN_IF2ARB1 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFARB1_ID 0x0000FFFF // Identifier
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1ARB2
// and CAN_IF2ARB2 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFARB2_MSGVAL 0x00008000 // Message valid
#define CAN_IFARB2_XTD 0x00004000 // Extended identifier
#define CAN_IFARB2_DIR 0x00002000 // Message direction
#define CAN_IFARB2_ID 0x00001FFF // Message identifier
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1MCTL
// and CAN_IF2MCTL registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFMCTL_NEWDAT 0x00008000 // New Data
#define CAN_IFMCTL_MSGLST 0x00004000 // Message lost
#define CAN_IFMCTL_INTPND 0x00002000 // Interrupt pending
#define CAN_IFMCTL_UMASK 0x00001000 // Use acceptance mask
#define CAN_IFMCTL_TXIE 0x00000800 // Transmit interrupt enable
#define CAN_IFMCTL_RXIE 0x00000400 // Receive interrupt enable
#define CAN_IFMCTL_RMTEN 0x00000200 // Remote enable
#define CAN_IFMCTL_TXRQST 0x00000100 // Transmit request
#define CAN_IFMCTL_EOB 0x00000080 // End of buffer
#define CAN_IFMCTL_DLC 0x0000000F // Data length code
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1DA1
// and CAN_IF2DA1 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFDA1_DATA 0x0000FFFF // Data - bytes 1 and 0
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1DA2
// and CAN_IF2DA2 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFDA2_DATA 0x0000FFFF // Data - bytes 3 and 2
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1DB1
// and CAN_IF2DB1 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFDB1_DATA 0x0000FFFF // Data - bytes 5 and 4
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the CAN_IF1DB2
// and CAN_IF2DB2 registers.
// Note: All bits may not be available in all registers.
//
//*****************************************************************************
#define CAN_IFDB2_DATA 0x0000FFFF // Data - bytes 7 and 6
#endif
#endif // __HW_CAN_H__