rt-thread/bsp/gd32303e-eval/Libraries/GD32F30x_standard_peripheral/Include/gd32f30x_rtc.h

112 lines
4.8 KiB
C
Raw Normal View History

2018-05-21 11:13:46 +08:00
/*!
\file gd32f30x_rtc.h
\brief definitions for the RTC
*/
/*
Copyright (C) 2017 GigaDevice
2017-02-10, V1.0.1, firmware for GD32F30x
*/
#ifndef GD32F30X_RTC_H
#define GD32F30X_RTC_H
#include "gd32f30x.h"
/* RTC definitions */
#define RTC RTC_BASE
/* registers definitions */
#define RTC_INTEN REG32(RTC + 0x00U) /*!< interrupt enable register */
#define RTC_CTL REG32(RTC + 0x04U) /*!< control register */
#define RTC_PSCH REG32(RTC + 0x08U) /*!< prescaler high register */
#define RTC_PSCL REG32(RTC + 0x0CU) /*!< prescaler low register */
#define RTC_DIVH REG32(RTC + 0x10U) /*!< divider high register */
#define RTC_DIVL REG32(RTC + 0x14U) /*!< divider low register */
#define RTC_CNTH REG32(RTC + 0x18U) /*!< counter high register */
#define RTC_CNTL REG32(RTC + 0x1CU) /*!< counter low register */
#define RTC_ALRMH REG32(RTC + 0x20U) /*!< alarm high register */
#define RTC_ALRML REG32(RTC + 0x24U) /*!< alarm low register */
/* bits definitions */
/* RTC_INTEN */
#define RTC_INTEN_SCIE BIT(0) /*!< second interrupt enable */
#define RTC_INTEN_ALRMIE BIT(1) /*!< alarm interrupt enable */
#define RTC_INTEN_OVIE BIT(2) /*!< overflow interrupt enable */
/* RTC_CTL */
#define RTC_CTL_SCIF BIT(0) /*!< second interrupt flag */
#define RTC_CTL_ALRMIF BIT(1) /*!< alarm interrupt flag */
#define RTC_CTL_OVIF BIT(2) /*!< overflow interrupt flag */
#define RTC_CTL_RSYNF BIT(3) /*!< registers synchronized flag */
#define RTC_CTL_CMF BIT(4) /*!< configuration mode flag */
#define RTC_CTL_LWOFF BIT(5) /*!< last write operation finished flag */
/* RTC_PSC */
#define RTC_PSCH_PSC BITS(0, 3) /*!< prescaler high value */
#define RTC_PSCL_PSC BITS(0, 15) /*!< prescaler low value */
/* RTC_DIV */
#define RTC_DIVH_DIV BITS(0, 3) /*!< divider high value */
#define RTC_DIVL_DIV BITS(0, 15) /*!< divider low value */
/* RTC_CNT */
#define RTC_CNTH_CNT BITS(0, 15) /*!< counter high value */
#define RTC_CNTL_CNT BITS(0, 15) /*!< counter low value */
/* RTC_ALRM */
#define RTC_ALRMH_ALRM BITS(0, 15) /*!< alarm high value */
#define RTC_ALRML_ALRM BITS(0, 15) /*!< alarm low value */
/* constants definitions */
#define RTC_HIGH_VALUE 0x000F0000U /*!< RTC high value */
#define RTC_LOW_VALUE 0x0000FFFFU /*!< RTC low value */
/* RTC interrupt enable or disable definitions */
#define RTC_INT_SECOND RTC_INTEN_SCIE /*!< second interrupt enable */
#define RTC_INT_ALARM RTC_INTEN_ALRMIE /*!< alarm interrupt enable */
#define RTC_INT_OVERFLOW RTC_INTEN_OVIE /*!< overflow interrupt enable */
/* RTC flag definitions */
#define RTC_FLAG_SECOND RTC_CTL_SCIF /*!< second interrupt flag */
#define RTC_FLAG_ALARM RTC_CTL_ALRMIF /*!< alarm interrupt flag */
#define RTC_FLAG_OVERFLOW RTC_CTL_OVIF /*!< overflow interrupt flag */
#define RTC_FLAG_RSYN RTC_CTL_RSYNF /*!< registers synchronized flag */
#define RTC_FLAG_LWOF RTC_CTL_LWOFF /*!< last write operation finished flag */
/* function declarations */
/* enable RTC interrupt */
void rtc_interrupt_enable(uint32_t interrupt);
/* disable RTC interrupt */
void rtc_interrupt_disable(uint32_t interrupt);
/* enter RTC configuration mode */
void rtc_configuration_mode_enter(void);
/* exit RTC configuration mode */
void rtc_configuration_mode_exit(void);
/* wait RTC last write operation finished flag set */
void rtc_lwoff_wait(void);
/* wait RTC registers synchronized flag set */
void rtc_register_sync_wait(void);
/* get RTC counter value */
uint32_t rtc_counter_get(void);
/* set RTC counter value */
void rtc_counter_set(uint32_t cnt);
/* set RTC prescaler value */
void rtc_prescaler_set(uint32_t psc);
/* set RTC alarm value */
void rtc_alarm_config(uint32_t alarm);
/* get RTC divider value */
uint32_t rtc_divider_get(void);
/* get RTC flag status */
FlagStatus rtc_flag_get(uint32_t flag);
/* clear RTC flag status */
void rtc_flag_clear(uint32_t flag);
#endif /* GD32F30X_RTC_H */