389 lines
16 KiB
ArmAsm
389 lines
16 KiB
ArmAsm
|
;/*
|
||
|
|
; * @brief LPC5410x startup code for Keil
|
||
|
|
; *
|
||
|
|
; * @note
|
||
|
|
; * Copyright(C) NXP Semiconductors, 2014
|
||
|
|
; * All rights reserved.
|
||
|
|
; *
|
||
|
|
; * @par
|
||
|
|
; * Software that is described herein is for illustrative purposes only
|
||
|
|
; * which provides customers with programming information regarding the
|
||
|
|
; * LPC products. This software is supplied "AS IS" without any warranties of
|
||
|
|
; * any kind, and NXP Semiconductors and its licensor disclaim any and
|
||
|
|
; * all warranties, express or implied, including all implied warranties of
|
||
|
|
; * merchantability, fitness for a particular purpose and non-infringement of
|
||
|
|
; * intellectual property rights. NXP Semiconductors assumes no responsibility
|
||
|
|
; * or liability for the use of the software, conveys no license or rights under any
|
||
|
|
; * patent, copyright, mask work right, or any other intellectual property rights in
|
||
|
|
; * or to any products. NXP Semiconductors reserves the right to make changes
|
||
|
|
; * in the software without notification. NXP Semiconductors also makes no
|
||
|
|
; * representation or warranty that such application will be suitable for the
|
||
|
|
; * specified use without further testing or modification.
|
||
|
|
; *
|
||
|
|
; * @par
|
||
|
|
; * Permission to use, copy, modify, and distribute this software and its
|
||
|
|
; * documentation is hereby granted, under NXP Semiconductors' and its
|
||
|
|
; * licensor's relevant copyrights in the software, without fee, provided that it
|
||
|
|
; * is used in conjunction with NXP Semiconductors microcontrollers. This
|
||
|
|
; * copyright, permission, and disclaimer notice must appear in all copies of
|
||
|
|
; * this code.
|
||
|
|
; */
|
||
|
|
|
||
|
|
; <h> Stack Configuration
|
||
|
|
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||
|
|
; </h>
|
||
|
|
|
||
|
|
Stack_Size EQU 0x00000200
|
||
|
|
|
||
|
|
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||
|
|
Stack_Mem SPACE Stack_Size
|
||
|
|
__initial_sp
|
||
|
|
|
||
|
|
|
||
|
|
; <h> Heap Configuration
|
||
|
|
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||
|
|
; </h>
|
||
|
|
|
||
|
|
Heap_Size EQU 0x00000100
|
||
|
|
|
||
|
|
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||
|
|
__heap_base
|
||
|
|
Heap_Mem SPACE Heap_Size
|
||
|
|
__heap_limit
|
||
|
|
|
||
|
|
PRESERVE8
|
||
|
|
THUMB
|
||
|
|
|
||
|
|
; Vector Table Mapped to Address 0 at Reset
|
||
|
|
AREA RESET, DATA, READONLY
|
||
|
|
EXPORT __Vectors
|
||
|
|
|
||
|
|
__Vectors DCD __initial_sp ; Top of Stack
|
||
|
|
DCD Reset_Handler ; Reset Handler
|
||
|
|
|
||
|
|
DCD NMI_Handler
|
||
|
|
DCD HardFault_Handler
|
||
|
|
DCD MemManage_Handler
|
||
|
|
DCD BusFault_Handler
|
||
|
|
DCD UsageFault_Handler
|
||
|
|
__vector_table_0x1c
|
||
|
|
DCD 0 ; Checksum of the first 7 words
|
||
|
|
DCD 0
|
||
|
|
DCD 0 ; Enhanced image marker, set to 0x0 for legacy boot
|
||
|
|
DCD 0 ; Pointer to enhanced boot block, set to 0x0 for legacy boot
|
||
|
|
DCD SVC_Handler
|
||
|
|
DCD DebugMon_Handler
|
||
|
|
DCD 0
|
||
|
|
DCD PendSV_Handler
|
||
|
|
DCD SysTick_Handler
|
||
|
|
|
||
|
|
; External Interrupts
|
||
|
|
DCD WDT_IRQHandler ; Watchdog
|
||
|
|
DCD BOD_IRQHandler ; Brown Out Detect
|
||
|
|
DCD Reserved_IRQHandler ; Reserved
|
||
|
|
DCD DMA_IRQHandler ; DMA Controller
|
||
|
|
DCD GINT0_IRQHandler ; GPIO Group0 Interrupt
|
||
|
|
DCD PIN_INT0_IRQHandler ; PIO INT0
|
||
|
|
DCD PIN_INT1_IRQHandler ; PIO INT1
|
||
|
|
DCD PIN_INT2_IRQHandler ; PIO INT2
|
||
|
|
DCD PIN_INT3_IRQHandler ; PIO INT3
|
||
|
|
DCD UTICK_IRQHandler ; UTICK timer
|
||
|
|
DCD MRT_IRQHandler ; Multi-Rate Timer
|
||
|
|
DCD CT32B0_IRQHandler ; CT32B0
|
||
|
|
DCD CT32B1_IRQHandler ; CT32B1
|
||
|
|
DCD CT32B2_IRQHandler ; CT32B2
|
||
|
|
DCD CT32B3_IRQHandler ; CT32B3
|
||
|
|
DCD CT32B4_IRQHandler ; CT32B4
|
||
|
|
DCD SCT0_IRQHandler ; Smart Counter Timer
|
||
|
|
DCD UART0_IRQHandler ; UART0
|
||
|
|
DCD UART1_IRQHandler ; UART1
|
||
|
|
DCD UART2_IRQHandler ; UART2
|
||
|
|
DCD UART3_IRQHandler ; UART3
|
||
|
|
DCD I2C0_IRQHandler ; I2C0 controller
|
||
|
|
DCD I2C1_IRQHandler ; I2C1 controller
|
||
|
|
DCD I2C2_IRQHandler ; I2C2 controller
|
||
|
|
DCD SPI0_IRQHandler ; SPI0 controller
|
||
|
|
DCD SPI1_IRQHandler ; SPI1 controller
|
||
|
|
DCD ADC_SEQA_IRQHandler ; ADC0 A sequence (A/D Converter) interrupt
|
||
|
|
DCD ADC_SEQB_IRQHandler ; ADC0 B sequence (A/D Converter) interrupt
|
||
|
|
DCD ADC_THCMP_IRQHandler ; ADC THCMP and OVERRUN ORed
|
||
|
|
DCD RTC_IRQHandler ; RTC Timer
|
||
|
|
DCD Reserved_IRQHandler ; Reserved
|
||
|
|
DCD MAILBOX_IRQHandler ; Mailbox
|
||
|
|
DCD GINT1_IRQHandler ; GPIO Group1 Interrupt
|
||
|
|
DCD PIN_INT4_IRQHandler ; PIO INT4
|
||
|
|
DCD PIN_INT5_IRQHandler ; PIO INT5
|
||
|
|
DCD PIN_INT6_IRQHandler ; PIO INT6
|
||
|
|
DCD PIN_INT7_IRQHandler ; PIO INT7
|
||
|
|
DCD Reserved_IRQHandler ; Reserved
|
||
|
|
DCD Reserved_IRQHandler ; Reserved
|
||
|
|
DCD Reserved_IRQHandler ; Reserved
|
||
|
|
DCD RIT_IRQHandler ; RITimer
|
||
|
|
DCD Reserved41_IRQHandler ; Reserved
|
||
|
|
DCD Reserved42_IRQHandler ; Reserved
|
||
|
|
DCD Reserved43_IRQHandler ; Reserved
|
||
|
|
DCD Reserved44_IRQHandler ; Reserved
|
||
|
|
|
||
|
|
;// <h> Code Read Protection level (CRP)
|
||
|
|
;// <o> CRP_Level:
|
||
|
|
;// <0xFFFFFFFF=> Disabled
|
||
|
|
;// <0x4E697370=> NO_ISP
|
||
|
|
;// <0x12345678=> CRP1
|
||
|
|
;// <0x87654321=> CRP2
|
||
|
|
;// <0x43218765=> CRP3 (Are you sure?)
|
||
|
|
;// </h>
|
||
|
|
;CRP_Level EQU 0xFFFFFFFF
|
||
|
|
|
||
|
|
;IF :LNOT::DEF:NO_CRP
|
||
|
|
;AREA |.ARM.__at_0x02FC|, CODE, READONLY
|
||
|
|
;CRP_Key DCD 0xFFFFFFFF
|
||
|
|
;ENDIF
|
||
|
|
|
||
|
|
AREA |.text|, CODE, READONLY
|
||
|
|
|
||
|
|
;cpu_id EQU 0xE000ED00
|
||
|
|
;cpu_ctrl EQU 0x40000300
|
||
|
|
;coproc_boot EQU 0x40000304
|
||
|
|
;coproc_stack EQU 0x40000308
|
||
|
|
|
||
|
|
;rel_vals
|
||
|
|
;DCD cpu_id, cpu_ctrl, coproc_boot, coproc_stack
|
||
|
|
;DCW 0xFFF, 0xC24
|
||
|
|
|
||
|
|
; Reset Handler - shared for both cores
|
||
|
|
Reset_Handler PROC
|
||
|
|
EXPORT Reset_Handler [WEAK]
|
||
|
|
EXPORT SystemInit [WEAK]
|
||
|
|
IMPORT __main
|
||
|
|
|
||
|
|
;IF :LNOT::DEF:SLAVEBOOT
|
||
|
|
;Both the M0+ and M4 core come via this shared startup code,
|
||
|
|
;but the M0+ and M4 core have different vector tables.
|
||
|
|
;Determine if the core executing this code is the master or
|
||
|
|
;the slave and handle each core state individually.
|
||
|
|
;shared_boot_entry
|
||
|
|
;LDR r6, =rel_vals
|
||
|
|
;MOVS r4, #0 ; Flag for slave core (0)
|
||
|
|
;MOVS r5, #1
|
||
|
|
|
||
|
|
;; Determine which core (M0+ or M4) this code is running on
|
||
|
|
;; r2 = (((*cpu_id) >> 4) & 0xFFF); (M4 core == 0xC24)
|
||
|
|
;get_current_core_id
|
||
|
|
;LDR r0, [r6, #0]
|
||
|
|
;LDR r1, [r0] ; r1 = CPU ID status
|
||
|
|
;LSRS r1, r1, #4 ; Right justify 12 CPU ID bits
|
||
|
|
;LDRH r2, [r6, #16] ; Mask for CPU ID bits
|
||
|
|
;ANDS r2, r1, r2 ; r2 = ARM COrtex CPU ID
|
||
|
|
;LDRH r3, [r6, #18] ; Mask for CPU ID bits
|
||
|
|
;CMP r3, r2 ; Core ID matches M4 identifier
|
||
|
|
;BNE get_master_status
|
||
|
|
;MOV r4, r5 ; Set flag for master core (1)
|
||
|
|
|
||
|
|
;; Determine if M4 core is the master or slave
|
||
|
|
;; r3 = ((*cpu_ctrl) & 1); (0 == m0+, 1 == M4)
|
||
|
|
;get_master_status
|
||
|
|
;LDR r0, [r6, #4]
|
||
|
|
;LDR r3, [r0] ; r3 = SYSCON co-processor CPU control status
|
||
|
|
;ANDS r3, r3, r5 ; r3 = (Bit 0: 1 = M4 is master, 0 = M4 is slave)
|
||
|
|
|
||
|
|
;; Select boot based on selected master core and core ID
|
||
|
|
;select_boot
|
||
|
|
;EORS r3, r3, r4 ; r4 = (Bit 0: 0 = master, 1 = slave)
|
||
|
|
;BNE slave_boot
|
||
|
|
;B normal_boot
|
||
|
|
|
||
|
|
;; Slave boot
|
||
|
|
;slave_boot
|
||
|
|
;LDR r0, [r6, #8]
|
||
|
|
;LDR r2, [r0] ; r1 = SYSCON co-processor boot address
|
||
|
|
;CMP r2, #0 ; Slave boot address = 0 (not set up)?
|
||
|
|
;BEQ cpu_sleep
|
||
|
|
;LDR r0, [r6, #12]
|
||
|
|
;LDR r1, [r0] ; r5 = SYSCON co-processor stack address
|
||
|
|
;MOV sp, r1 ; Update slave CPU stack pointer
|
||
|
|
;; Be sure to update VTOR for the slave MCU to point to the
|
||
|
|
;; slave vector table in boot memory
|
||
|
|
;BX r2 ; Jump to slave boot address
|
||
|
|
|
||
|
|
;; Slave isn't yet setup for system boot from the master
|
||
|
|
;; so sleep until the master sets it up and then reboots it
|
||
|
|
;cpu_sleep
|
||
|
|
;MOV sp, r5 ; Will force exception if something happens
|
||
|
|
;cpu_sleep_wfi
|
||
|
|
;WFI ; Sleep forever until master reboots
|
||
|
|
;B cpu_sleep_wfi
|
||
|
|
;ENDIF
|
||
|
|
|
||
|
|
; Normal boot for master/slave
|
||
|
|
;normal_boot
|
||
|
|
LDR r0, =SystemInit
|
||
|
|
BLX r0
|
||
|
|
LDR r0, =__main
|
||
|
|
BX r0
|
||
|
|
ENDP
|
||
|
|
|
||
|
|
; For cores with SystemInit() or __main(), the code will sleep the MCU
|
||
|
|
SystemInit PROC
|
||
|
|
EXPORT SystemInit [WEAK]
|
||
|
|
BX lr
|
||
|
|
ENDP
|
||
|
|
|
||
|
|
; Dummy Exception Handlers (infinite loops which can be modified)
|
||
|
|
NMI_Handler PROC
|
||
|
|
EXPORT NMI_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
HardFault_Handler\
|
||
|
|
PROC
|
||
|
|
EXPORT HardFault_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
MemManage_Handler PROC
|
||
|
|
EXPORT MemManage_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
BusFault_Handler PROC
|
||
|
|
EXPORT BusFault_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
UsageFault_Handler PROC
|
||
|
|
EXPORT UsageFault_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
SVC_Handler PROC
|
||
|
|
EXPORT SVC_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
DebugMon_Handler PROC
|
||
|
|
EXPORT DebugMon_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
PendSV_Handler PROC
|
||
|
|
EXPORT PendSV_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
SysTick_Handler PROC
|
||
|
|
EXPORT SysTick_Handler [WEAK]
|
||
|
|
B .
|
||
|
|
ENDP
|
||
|
|
|
||
|
|
Default_Handler PROC
|
||
|
|
EXPORT WDT_IRQHandler [WEAK] ; Watchdog
|
||
|
|
EXPORT BOD_IRQHandler [WEAK] ; Brown Out Detect
|
||
|
|
EXPORT DMA_IRQHandler [WEAK] ; DMA Controller
|
||
|
|
EXPORT GINT0_IRQHandler [WEAK] ; GPIO Group0 Interrupt
|
||
|
|
EXPORT PIN_INT0_IRQHandler [WEAK] ; PIO INT0
|
||
|
|
EXPORT PIN_INT1_IRQHandler [WEAK] ; PIO INT1
|
||
|
|
EXPORT PIN_INT2_IRQHandler [WEAK] ; PIO INT2
|
||
|
|
EXPORT PIN_INT3_IRQHandler [WEAK] ; PIO INT3
|
||
|
|
EXPORT UTICK_IRQHandler [WEAK] ; UTICK timer
|
||
|
|
EXPORT MRT_IRQHandler [WEAK] ; Multi-Rate Timer
|
||
|
|
EXPORT CT32B0_IRQHandler [WEAK] ; CT32B0
|
||
|
|
EXPORT CT32B1_IRQHandler [WEAK] ; CT32B1
|
||
|
|
EXPORT CT32B2_IRQHandler [WEAK] ; CT32B2
|
||
|
|
EXPORT CT32B3_IRQHandler [WEAK] ; CT32B3
|
||
|
|
EXPORT CT32B4_IRQHandler [WEAK] ; CT32B4
|
||
|
|
EXPORT UART0_IRQHandler [WEAK] ; UART0
|
||
|
|
EXPORT SCT0_IRQHandler [WEAK] ; Smart Counter Timer
|
||
|
|
EXPORT UART1_IRQHandler [WEAK] ; UART1
|
||
|
|
EXPORT UART2_IRQHandler [WEAK] ; UART2
|
||
|
|
EXPORT UART3_IRQHandler [WEAK] ; UART3
|
||
|
|
EXPORT I2C0_IRQHandler [WEAK] ; I2C0 controller
|
||
|
|
EXPORT I2C1_IRQHandler [WEAK] ; I2C1 controller
|
||
|
|
EXPORT I2C2_IRQHandler [WEAK] ; I2C2 controller
|
||
|
|
EXPORT SPI0_IRQHandler [WEAK] ; SPI0 controller
|
||
|
|
EXPORT SPI1_IRQHandler [WEAK] ; SPI1 controller
|
||
|
|
EXPORT ADC_SEQA_IRQHandler [WEAK] ; ADC0 A sequence (A/D Converter) interrupt
|
||
|
|
EXPORT ADC_SEQB_IRQHandler [WEAK] ; ADC0 B sequence (A/D Converter) interrupt
|
||
|
|
EXPORT ADC_THCMP_IRQHandler [WEAK] ; ADC THCMP and OVERRUN ORed
|
||
|
|
EXPORT RTC_IRQHandler [WEAK] ; RTC Timer
|
||
|
|
EXPORT MAILBOX_IRQHandler [WEAK] ; Mailbox
|
||
|
|
EXPORT GINT1_IRQHandler [WEAK] ; GPIO Group1 Interrupt
|
||
|
|
EXPORT PIN_INT4_IRQHandler [WEAK] ; PIO INT4
|
||
|
|
EXPORT PIN_INT5_IRQHandler [WEAK] ; PIO INT5
|
||
|
|
EXPORT PIN_INT6_IRQHandler [WEAK] ; PIO INT6
|
||
|
|
EXPORT PIN_INT7_IRQHandler [WEAK] ; PIO INT7
|
||
|
|
EXPORT RIT_IRQHandler [WEAK] ; RITimer
|
||
|
|
EXPORT Reserved41_IRQHandler [WEAK] ; Reserved
|
||
|
|
EXPORT Reserved42_IRQHandler [WEAK] ; Reserved
|
||
|
|
EXPORT Reserved43_IRQHandler [WEAK] ; Reserved
|
||
|
|
EXPORT Reserved44_IRQHandler [WEAK] ; Reserved
|
||
|
|
EXPORT Reserved_IRQHandler [WEAK] ; Reserved
|
||
|
|
|
||
|
|
WDT_IRQHandler ; Watchdog
|
||
|
|
BOD_IRQHandler ; Brown Out Detect
|
||
|
|
DMA_IRQHandler ; DMA Controller
|
||
|
|
GINT0_IRQHandler ; GPIO Group0 Interrupt
|
||
|
|
PIN_INT0_IRQHandler ; PIO INT0
|
||
|
|
PIN_INT1_IRQHandler ; PIO INT1
|
||
|
|
PIN_INT2_IRQHandler ; PIO INT2
|
||
|
|
PIN_INT3_IRQHandler ; PIO INT3
|
||
|
|
UTICK_IRQHandler ; UTICK timer
|
||
|
|
MRT_IRQHandler ; Multi-Rate Timer
|
||
|
|
CT32B0_IRQHandler ; CT32B0
|
||
|
|
CT32B1_IRQHandler ; CT32B1
|
||
|
|
CT32B2_IRQHandler ; CT32B2
|
||
|
|
CT32B3_IRQHandler ; CT32B3
|
||
|
|
CT32B4_IRQHandler ; CT32B4
|
||
|
|
UART0_IRQHandler ; UART0
|
||
|
|
SCT0_IRQHandler ; Smart Counter Timer
|
||
|
|
UART1_IRQHandler ; UART1
|
||
|
|
UART2_IRQHandler ; UART2
|
||
|
|
UART3_IRQHandler ; UART3
|
||
|
|
I2C0_IRQHandler ; I2C0 controller
|
||
|
|
I2C1_IRQHandler ; I2C1 controller
|
||
|
|
I2C2_IRQHandler ; I2C2 controller
|
||
|
|
SPI0_IRQHandler ; SPI0 controller
|
||
|
|
SPI1_IRQHandler ; SPI1 controller
|
||
|
|
ADC_SEQA_IRQHandler ; ADC0 A sequence (A/D Converter) interrupt
|
||
|
|
ADC_SEQB_IRQHandler ; ADC0 B sequence (A/D Converter) interrupt
|
||
|
|
ADC_THCMP_IRQHandler ; ADC THCMP and OVERRUN ORed
|
||
|
|
RTC_IRQHandler ; RTC Timer
|
||
|
|
MAILBOX_IRQHandler ; Mailbox
|
||
|
|
GINT1_IRQHandler ; GPIO Group1 Interrupt
|
||
|
|
PIN_INT4_IRQHandler ; PIO INT4
|
||
|
|
PIN_INT5_IRQHandler ; PIO INT5
|
||
|
|
PIN_INT6_IRQHandler ; PIO INT6
|
||
|
|
PIN_INT7_IRQHandler ; PIO INT7
|
||
|
|
RIT_IRQHandler ; RITimer
|
||
|
|
Reserved41_IRQHandler ; Reserved
|
||
|
|
Reserved42_IRQHandler ; Reserved
|
||
|
|
Reserved43_IRQHandler ; Reserved
|
||
|
|
Reserved44_IRQHandler ; Reserved
|
||
|
|
Reserved_IRQHandler ; Reserved
|
||
|
|
|
||
|
|
B .
|
||
|
|
|
||
|
|
ENDP
|
||
|
|
|
||
|
|
|
||
|
|
ALIGN
|
||
|
|
|
||
|
|
|
||
|
|
; User Initial Stack & Heap
|
||
|
|
|
||
|
|
IF :DEF:__MICROLIB
|
||
|
|
|
||
|
|
EXPORT __initial_sp
|
||
|
|
EXPORT __heap_base
|
||
|
|
EXPORT __heap_limit
|
||
|
|
|
||
|
|
ELSE
|
||
|
|
|
||
|
|
IMPORT __use_two_region_memory
|
||
|
|
EXPORT __user_initial_stackheap
|
||
|
|
__user_initial_stackheap
|
||
|
|
|
||
|
|
LDR R0, = Heap_Mem
|
||
|
|
LDR R1, =(Stack_Mem + Stack_Size)
|
||
|
|
LDR R2, = (Heap_Mem + Heap_Size)
|
||
|
|
LDR R3, = Stack_Mem
|
||
|
|
BX LR
|
||
|
|
|
||
|
|
ALIGN
|
||
|
|
|
||
|
|
ENDIF
|
||
|
|
|
||
|
|
|
||
|
|
END
|