789 lines
36 KiB
C
789 lines
36 KiB
C
|
/*******************************************************************************
|
|||
|
|
* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
|
|||
|
|
*
|
|||
|
|
* This software is owned and published by:
|
|||
|
|
* Huada Semiconductor Co.,Ltd ("HDSC").
|
|||
|
|
*
|
|||
|
|
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
|
|||
|
|
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
|
|||
|
|
*
|
|||
|
|
* This software contains source code for use with HDSC
|
|||
|
|
* components. This software is licensed by HDSC to be adapted only
|
|||
|
|
* for use in systems utilizing HDSC components. HDSC shall not be
|
|||
|
|
* responsible for misuse or illegal use of this software for devices not
|
|||
|
|
* supported herein. HDSC is providing this software "AS IS" and will
|
|||
|
|
* not be responsible for issues arising from incorrect user implementation
|
|||
|
|
* of the software.
|
|||
|
|
*
|
|||
|
|
* Disclaimer:
|
|||
|
|
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
|
|||
|
|
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
|
|||
|
|
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
|
|||
|
|
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
|
|||
|
|
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
|
|||
|
|
* WARRANTY OF NONINFRINGEMENT.
|
|||
|
|
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
|
|||
|
|
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
|
|||
|
|
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
|
|||
|
|
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
|
|||
|
|
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
|
|||
|
|
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
|
|||
|
|
* SAVINGS OR PROFITS,
|
|||
|
|
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
|||
|
|
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
|
|||
|
|
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
|
|||
|
|
* FROM, THE SOFTWARE.
|
|||
|
|
*
|
|||
|
|
* This software may be replicated in part or whole for the licensed use,
|
|||
|
|
* with the restriction that this Disclaimer and Copyright notice must be
|
|||
|
|
* included with each copy of this software, whether used in part or whole,
|
|||
|
|
* at all times.
|
|||
|
|
*/
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/** \file bt.h
|
|||
|
|
**
|
|||
|
|
** 基本定时器数据结构及API声明
|
|||
|
|
** @link BT Timer3 Group Some description @endlink
|
|||
|
|
**
|
|||
|
|
** History:
|
|||
|
|
** - 2018-04-29 Husj First Version
|
|||
|
|
**
|
|||
|
|
*****************************************************************************/
|
|||
|
|
|
|||
|
|
#ifndef __TIMER0_H__
|
|||
|
|
#define __TIMER0_H__
|
|||
|
|
|
|||
|
|
/*****************************************************************************
|
|||
|
|
* Include files
|
|||
|
|
*****************************************************************************/
|
|||
|
|
#include "ddl.h"
|
|||
|
|
#include "interrupts_hc32l136.h"
|
|||
|
|
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
extern "C"
|
|||
|
|
{
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \defgroup Tim0Group Base Timer (BT)
|
|||
|
|
**
|
|||
|
|
******************************************************************************/
|
|||
|
|
//@{
|
|||
|
|
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/* Global pre-processor symbols/macros ('#define') */
|
|||
|
|
/******************************************************************************/
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global type definitions
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief Timer3 通道定义
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_channel
|
|||
|
|
{
|
|||
|
|
Tim0CH0 = 0u, ///< Timer3通道0
|
|||
|
|
Tim0CH1 = 1u, ///< Timer3通道1
|
|||
|
|
Tim0CH2 = 2u, ///< Timer3通道2
|
|||
|
|
}en_tim0_channel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 工作模式选择数据类型重定义 (MODE)(模式0/1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_work_mode
|
|||
|
|
{
|
|||
|
|
Tim0WorkMode0 = 0u, ///< 定时器模式
|
|||
|
|
Tim0WorkMode1 = 1u, ///< PWC模式
|
|||
|
|
Tim0WorkMode2 = 2u, ///< 锯齿波模式
|
|||
|
|
Tim0WorkMode3 = 3u, ///< 三角波模式
|
|||
|
|
}en_tim0_work_mode_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 极性控制数据类型重定义 (GATE_P)(模式0)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m0cr_gatep
|
|||
|
|
{
|
|||
|
|
Tim0GatePositive = 0u, ///< 高电平有效
|
|||
|
|
Tim0GateOpposite = 1u, ///< 低电平有效
|
|||
|
|
}en_tim0_m0cr_gatep_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3 预除频选择 (PRS)(模式0/1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_cr_timclkdiv
|
|||
|
|
{
|
|||
|
|
Tim0PCLKDiv1 = 0u, ///< Div 1
|
|||
|
|
Tim0PCLKDiv2 = 1u, ///< Div 2
|
|||
|
|
Tim0PCLKDiv4 = 2u, ///< Div 4
|
|||
|
|
Tim0PCLKDiv8 = 3u, ///< Div 8
|
|||
|
|
Tim0PCLKDiv16 = 4u, ///< Div 16
|
|||
|
|
Tim0PCLKDiv32 = 5u, ///< Div 32
|
|||
|
|
Tim0PCLKDiv64 = 6u, ///< Div 64
|
|||
|
|
Tim0PCLKDiv256 = 7u, ///< Div 256
|
|||
|
|
}en_tim0_cr_timclkdiv_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 计数/定时器功能选择数据类型重定义 (CT)(模式0/1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_cr_ct
|
|||
|
|
{
|
|||
|
|
Tim0Timer = 0u, ///< 定时器功能，计数时钟为内部PCLK
|
|||
|
|
Tim0Counter = 1u, ///< 计数器功能，计数时钟为外部ETR
|
|||
|
|
}en_tim0_cr_ct_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 定时器工作模式数据类型重定义 (MD)(模式0)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m0cr_md
|
|||
|
|
{
|
|||
|
|
Tim032bitFreeMode = 0u, ///< 32位计数器/定时器
|
|||
|
|
Tim016bitArrMode = 1u, ///< 自动重装载16位计数器/定时器
|
|||
|
|
}en_tim0_m0cr_md_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3中断类型数据类型重定义(模式0/1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_irq_type
|
|||
|
|
{
|
|||
|
|
Tim0UevIrq = 0u, ///< 溢出/事件更新中断
|
|||
|
|
Tim0CA0Irq = 2u, ///< CH0A捕获/比较中断(仅模式1/23存在)
|
|||
|
|
Tim0CA1Irq = 3u, ///< CH1A捕获/比较中断(仅模式23存在)
|
|||
|
|
Tim0CA2Irq = 4u, ///< CH2A捕获/比较中断(仅模式23存在)
|
|||
|
|
Tim0CB0Irq = 5u, ///< CH0B捕获/比较中断(仅模式23存在)
|
|||
|
|
Tim0CB1Irq = 6u, ///< CH1B捕获/比较中断(仅模式23存在)
|
|||
|
|
Tim0CB2Irq = 7u, ///< CH2B捕获/比较中断(仅模式23存在)
|
|||
|
|
Tim0CA0E = 8u, ///< CH0A捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0CA1E = 9u, ///< CH1A捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0CA2E = 10u, ///< CH2A捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0CB0E = 11u, ///< CH0B捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0CB1E = 12u, ///< CH1B捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0CB2E = 13u, ///< CH2B捕获数据丢失标志(仅模式23存在)(不是中断)
|
|||
|
|
Tim0BkIrq = 14u, ///< 刹车中断(仅模式23存在）
|
|||
|
|
Tim0TrigIrq = 15u, ///< 触发中断(仅模式23存在）
|
|||
|
|
}en_tim0_irq_type_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 测量开始结束数据类型重定义 (Edg1stEdg2nd)(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m1cr_Edge
|
|||
|
|
{
|
|||
|
|
Tim0PwcRiseToRise = 0u, ///< 上升沿到上升沿(周期)
|
|||
|
|
Tim0PwcFallToRise = 1u, ///< 下降沿到上升沿(低电平)
|
|||
|
|
Tim0PwcRiseToFall = 2u, ///< 上升沿到下降沿(高电平)
|
|||
|
|
Tim0PwcFallToFall = 3u, ///< 下降沿到下降沿(周期)
|
|||
|
|
}en_tim0_m1cr_Edge_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief PWC测量测试模式选择数据类型重定义 (Oneshot)(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m1cr_oneshot
|
|||
|
|
{
|
|||
|
|
Tim0PwcCycleDetect = 0u, ///< PWC循环测量
|
|||
|
|
Tim0PwcOneShotDetect = 1u, ///< PWC单次测量
|
|||
|
|
}en_tim0_m1cr_oneshot_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief PWC IA0选择数据类型重定义 (IA0S)(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m1_mscr_ia0s
|
|||
|
|
{
|
|||
|
|
Tim0IA0Input = 0u, ///< IAO输入
|
|||
|
|
Tim0XORInput = 1u, ///< IA0 ETR GATE XOR(TIM0/1/2)/IA0 IA1 IA2 XOR(TIM3)
|
|||
|
|
}en_tim0_m1_mscr_ia0s_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief PWC IB0选择数据类型重定义 (IA0S)(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m1_mscr_ib0s
|
|||
|
|
{
|
|||
|
|
Tim0IB0Input = 0u, ///< IBO输入
|
|||
|
|
Tim0TsInput = 1u, ///< 内部触发TS选择信号
|
|||
|
|
}en_tim0_m1_mscr_ib0s_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 输出极性、输入相位 数据类型重定义 (CCPA0/CCPB0/ETP/BKP)(模式1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_port_polarity
|
|||
|
|
{
|
|||
|
|
Tim0PortPositive = 0u, ///< 正常输入输出
|
|||
|
|
Tim0PortOpposite = 1u, ///< 反向输入输出
|
|||
|
|
}en_tim0_port_polarity_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 滤波选择数据类型重定义 (FLTET/FLTA0/FLAB0)(模式1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_flt
|
|||
|
|
{
|
|||
|
|
Tim0FltNone = 0u, ///< 无滤波
|
|||
|
|
Tim0FltPCLKCnt3 = 4u, ///< PCLK 3个连续有效
|
|||
|
|
Tim0FltPCLKDiv4Cnt3 = 5u, ///< PCLK/4 3个连续有效
|
|||
|
|
Tim0FltPCLKDiv16Cnt3 = 6u, ///< PCLK/16 3个连续有效
|
|||
|
|
Tim0FltPCLKDiv64Cnt3 = 7u, ///< PCLK/64 3个连续有效
|
|||
|
|
}en_tim0_flt_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 通道比较控制 数据类型重定义 (OCMA/OCMB)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_fltr_ocm
|
|||
|
|
{
|
|||
|
|
Tim0ForceLow = 0u, ///< 强制为0
|
|||
|
|
Tim0ForceHigh = 1u, ///< 强制为1
|
|||
|
|
Tim0CMPForceLow = 2u, ///< 比较匹配时强制为0
|
|||
|
|
Tim0CMPForceHigh = 3u, ///< 比较匹配时强制为1
|
|||
|
|
Tim0CMPInverse = 4u, ///< 比较匹配时翻转电平
|
|||
|
|
Tim0CMPOnePrdHigh = 5u, ///< 比较匹配时输出一个计数周期的高电平
|
|||
|
|
Tim0PWMMode1 = 6u, ///< 通道控制为PWM mode 1
|
|||
|
|
Tim0PWMMode2 = 7u, ///< 通道控制为PWM mode 2
|
|||
|
|
}en_tim0_m23_fltr_ocm_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 主从模式TS数据类型重定义 (TS)(模式1/23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_mscr_ts
|
|||
|
|
{
|
|||
|
|
Tim0Ts0ETR = 0u, ///< ETR外部输入滤波后的相位选择信号
|
|||
|
|
Tim0Ts1TIM0TRGO = 1u, ///< Timer0的TRGO输出信号
|
|||
|
|
Tim0Ts2TIM1TRGO = 2u, ///< Timer1的TRGO输出信号
|
|||
|
|
Tim0Ts3TIM2TRGO = 3u, ///< Timer2的TRGO输出信号
|
|||
|
|
Tim0Ts4TIM3TRGO = 4u, ///< Timer3的TRGO输出信号
|
|||
|
|
//Tim0Ts5IA0ED = 5u, ///< 无效
|
|||
|
|
Tim0Ts6IAFP = 6u, ///< CH0A 外部输输入滤波后的相位选择信号
|
|||
|
|
Tim0Ts7IBFP = 7u, ///< CH0B 外部输输入滤波后的相位选择信
|
|||
|
|
}en_tim0_mscr_ts_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief PWM输出模式选择数据类型重定义 (COMP)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23cr_comp
|
|||
|
|
{
|
|||
|
|
Tim0IndependentPWM = 0u, ///< 独立PWM输出
|
|||
|
|
Tim0ComplementaryPWM = 1u, ///< 互补PWM输出
|
|||
|
|
}en_tim0_m23cr_comp_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 计数方向选择数据类型重定义 (DIR)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23cr_dir
|
|||
|
|
{
|
|||
|
|
Tim0CntUp = 0u, ///< 向上计数
|
|||
|
|
Tim0CntDown = 1u, ///< 向下计数
|
|||
|
|
}en_tim0_m23cr_dir_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 计数方向选择数据类型重定义 (PWM2S)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23cr_pwm2s
|
|||
|
|
{
|
|||
|
|
Tim0DoublePointCmp = 0u, ///< 双点比较使能，使用CCRA,CCRB比较控制OCREFA输出
|
|||
|
|
Tim0SinglePointCmp = 1u, ///< 单点比较使能，使用CCRA比较控制OCREFA输出
|
|||
|
|
}en_tim0_m23cr_pwm2s_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief GATE在PWM互补模式下捕获或比较功能 选择数据类型重定义 (CSG)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23cr_csg
|
|||
|
|
{
|
|||
|
|
Tim0PWMCompGateCmpOut = 0u, ///< 在PWM互补模式下，Gate作为比较输出
|
|||
|
|
Tim0PWMCompGateCapIn = 1u, ///< 在PWM互补模式下，Gate作为捕获输入
|
|||
|
|
}en_tim0_m23cr_csg_t;
|
|||
|
|
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 比较捕获寄存器 数据类型重定义 (CCR0A,CCR0B)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_ccrx
|
|||
|
|
{
|
|||
|
|
Tim0CCR0A = 0u, ///< CCR0A比较捕获寄存器
|
|||
|
|
Tim0CCR0B = 1u, ///< CCR0B比较捕获寄存器
|
|||
|
|
Tim0CCR1A = 2u, ///< CCR1A比较捕获寄存器
|
|||
|
|
Tim0CCR1B = 3u, ///< CCR1B比较捕获寄存器
|
|||
|
|
Tim0CCR2A = 4u, ///< CCR2A比较捕获寄存器
|
|||
|
|
Tim0CCR2B = 5u, ///< CCR2B比较捕获寄存器
|
|||
|
|
}en_tim0_m23_ccrx_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief OCREF清除源 选择数据类型重定义 (OCCS)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23ce_occs
|
|||
|
|
{
|
|||
|
|
Tim0OC_Ref_Clr = 0u, ///< 来自VC的OC_Ref_Clr
|
|||
|
|
Tim0ETRf = 1u, ///< 外部ETRf
|
|||
|
|
}en_tim0_m23ce_occs_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 比较匹配中断模式 选择数据类型重定义 (CIS/CISB)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_cisa_cisb
|
|||
|
|
{
|
|||
|
|
Tim0CmpIntNone = 0u, ///< 无比较匹配中断
|
|||
|
|
Tim0CmpIntRise = 1u, ///< 比较匹配上升沿中断
|
|||
|
|
Tim0CmpIntFall = 2u, ///< 比较匹配下降沿中断
|
|||
|
|
Tim0CmpIntRiseFall = 3u, ///< 比较匹配上升沿下降沿中断
|
|||
|
|
}en_tim0_m23_cisa_cisb_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3端口控制 - 刹车时CHx输出状态控制(BKSA/BKSB)(模式23)
|
|||
|
|
**
|
|||
|
|
** \note
|
|||
|
|
******************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_crchx_bks
|
|||
|
|
{
|
|||
|
|
Tim0CHxBksHiZ = 0u, ///< 刹车使能时，CHx端口输出高阻态
|
|||
|
|
Tim0CHxBksNorm = 1u, ///< 刹车使能时，CHx端口正常输出
|
|||
|
|
Tim0CHxBksLow = 2u, ///< 刹车使能时，CHx端口输出低电平
|
|||
|
|
Tim0CHxBksHigh = 3u, ///< 刹车使能时，CHx端口输出高电平
|
|||
|
|
}en_tim0_m23_crchx_bks_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3端口控制 - CHx上升沿下降沿捕获(CRx/CFx)(模式23)
|
|||
|
|
**
|
|||
|
|
** \note
|
|||
|
|
******************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_crch0_cfx_crx
|
|||
|
|
{
|
|||
|
|
Tim0CHxCapNone = 0u, ///< CHx通道捕获禁止
|
|||
|
|
Tim0CHxCapRise = 1u, ///< CHx通道上升沿捕获使能
|
|||
|
|
Tim0CHxCapFall = 2u, ///< CHx通道下降沿捕获使能
|
|||
|
|
Tim0CHxCapFallRise = 3u, ///< CHx通道上升沿下降沿捕获都使能
|
|||
|
|
}en_tim0_m23_crch0_cfx_crx_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3端口控制 - CHx比较捕获模式(CSA/CSB)(模式23)
|
|||
|
|
**
|
|||
|
|
** \note
|
|||
|
|
******************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_crch0_csa_csb
|
|||
|
|
{
|
|||
|
|
Tim0CHxCmpMode = 0u, ///< CHx通道设置为比较模式
|
|||
|
|
Tim0CHxCapMode = 1u, ///< CHx通道设置为捕获模式
|
|||
|
|
}en_tim0_m23_crch0_csa_csb_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 比较模式下 DMA比较触发选择 数据类型重定义 (CCDS)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_mscr_ccds
|
|||
|
|
{
|
|||
|
|
Tim0CmpTrigDMA = 0u, ///< 比较匹配触发DMA
|
|||
|
|
Tim0UEVTrigDMA = 1u, ///< 事件更新代替比较匹配触发DMA
|
|||
|
|
}en_tim0_m23_mscr_ccds_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 主从模式选择 数据类型重定义 (MSM)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_mscr_msm
|
|||
|
|
{
|
|||
|
|
Tim0SlaveMode = 0u, ///< 从模式
|
|||
|
|
Tim0MasterMode = 1u, ///< 主模式
|
|||
|
|
}en_tim0_m23_mscr_msm_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 触发主模式输出源 数据类型重定义 (MMS)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_mscr_mms
|
|||
|
|
{
|
|||
|
|
Tim0MasterUG = 0u, ///< UG(软件更新)源
|
|||
|
|
Tim0MasterCTEN = 1u, ///< CTEN源
|
|||
|
|
Tim0MasterUEV = 2u, ///< UEV更新源
|
|||
|
|
Tim0MasterCMPSO = 3u, ///< 比较匹配选择输出源
|
|||
|
|
Tim0MasterOCA0Ref = 4u, ///< OCA0_Ref源
|
|||
|
|
Tim0MasterOCB0Ref = 5u, ///< OCB0_Ref源
|
|||
|
|
//Tim0MasterOCB0Ref = 6u,
|
|||
|
|
//Tim0MasterOCB0Ref = 7u,
|
|||
|
|
}en_tim0_m23_mscr_mms_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 触发从模式选择 数据类型重定义 (SMS)(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_m23_mscr_sms
|
|||
|
|
{
|
|||
|
|
Tim0SlaveIClk = 0u, ///< 使用内部时钟
|
|||
|
|
Tim0SlaveResetTIM = 1u, ///< 复位功能
|
|||
|
|
Tim0SlaveTrigMode = 2u, ///< 触发模式
|
|||
|
|
Tim0SlaveEClk = 3u, ///< 外部时钟模式
|
|||
|
|
Tim0SlaveCodeCnt1 = 4u, ///< 正交编码计数模式1
|
|||
|
|
Tim0SlaveCodeCnt2 = 5u, ///< 正交编码计数模式2
|
|||
|
|
Tim0SlaveCodeCnt3 = 6u, ///< 正交编码计数模式3
|
|||
|
|
Tim0SlaveGateCtrl = 7u, ///< 门控功能
|
|||
|
|
}en_tim0_m23_mscr_sms_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 定时器运行控制数据类型重定义 (CTEN)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_tim0_start
|
|||
|
|
{
|
|||
|
|
Tim0CTENDisable = 0u, ///< 停止
|
|||
|
|
Tim0CTENEnable = 1u, ///< 运行
|
|||
|
|
}en_tim0_start_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3 mode0 配置结构体定义(模式0)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_mode0_config
|
|||
|
|
{
|
|||
|
|
en_tim0_work_mode_t enWorkMode; ///< 工作模式设置
|
|||
|
|
en_tim0_m0cr_gatep_t enGateP; ///< 门控极性控制
|
|||
|
|
boolean_t bEnGate; ///< 门控使能
|
|||
|
|
en_tim0_cr_timclkdiv_t enPRS; ///< 预除频配置
|
|||
|
|
boolean_t bEnTog; ///< 翻转输出使能
|
|||
|
|
en_tim0_cr_ct_t enCT; ///< 定时/计数功能选择
|
|||
|
|
en_tim0_m0cr_md_t enCntMode; ///< 计数模式配置
|
|||
|
|
|
|||
|
|
func_ptr_t pfnTim0Cb; ///< Timer3中断服务回调函数[void function(void)]
|
|||
|
|
}stc_tim0_mode0_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3 mode1 配置结构体定义(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_mode1_config
|
|||
|
|
{
|
|||
|
|
en_tim0_work_mode_t enWorkMode; ///< 工作模式设置
|
|||
|
|
en_tim0_cr_timclkdiv_t enPRS; ///< 预除频配置
|
|||
|
|
en_tim0_cr_ct_t enCT; ///< 定时/计数功能选择
|
|||
|
|
en_tim0_m1cr_oneshot_t enOneShot; ///< 单次测量/循环测量选择
|
|||
|
|
|
|||
|
|
func_ptr_t pfnTim0Cb; ///< Timer3中断服务回调函数[void function(void)]
|
|||
|
|
|
|||
|
|
}stc_tim0_mode1_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief PWC输入配置结构体定义(模式1)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_pwc_input_config
|
|||
|
|
{
|
|||
|
|
en_tim0_mscr_ts_t enTsSel; ///< 触发输入源选择
|
|||
|
|
en_tim0_m1_mscr_ia0s_t enIA0Sel; ///< CHA0输入选择
|
|||
|
|
en_tim0_m1_mscr_ib0s_t enIB0Sel; ///< CHB0输入选择
|
|||
|
|
en_tim0_port_polarity_t enETRPhase; ///< ETR相位选择
|
|||
|
|
en_tim0_flt_t enFltETR; ///< ETR滤波设置
|
|||
|
|
en_tim0_flt_t enFltIA0; ///< CHA0滤波设置
|
|||
|
|
en_tim0_flt_t enFltIB0; ///< CHB0滤波设置
|
|||
|
|
}stc_tim0_pwc_input_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief TIM3 mode23 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_mode23_config
|
|||
|
|
{
|
|||
|
|
en_tim0_work_mode_t enWorkMode; ///< 工作模式设置
|
|||
|
|
en_tim0_m23cr_dir_t enCntDir; ///< 计数方向
|
|||
|
|
en_tim0_cr_timclkdiv_t enPRS; ///< 时钟预除频配置
|
|||
|
|
en_tim0_cr_ct_t enCT; ///< 定时/计数功能选择
|
|||
|
|
en_tim0_m23cr_comp_t enPWMTypeSel; ///< PWM模式选择（独立/互补）
|
|||
|
|
en_tim0_m23cr_pwm2s_t enPWM2sSel; ///< OCREFA双点比较功能选择
|
|||
|
|
boolean_t bOneShot; ///< 单次触发模式使能/禁止
|
|||
|
|
boolean_t bURSSel; ///< 更新源选择
|
|||
|
|
|
|||
|
|
func_ptr_t pfnTim0Cb; ///< Timer3中断服务回调函数[void function(void)]
|
|||
|
|
}stc_tim0_mode23_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief GATE在PWM互补模式下捕获或比较功能 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_gate_config
|
|||
|
|
{
|
|||
|
|
en_tim0_m23cr_csg_t enGateFuncSel; ///< Gate比较、捕获功能选择
|
|||
|
|
boolean_t bGateRiseCap; ///< GATE作为捕获功能时，上沿捕获有效控制
|
|||
|
|
boolean_t bGateFallCap; ///< GATE作为捕获功能时，下沿捕获有效控制
|
|||
|
|
}stc_tim0_m23_gate_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief CHA/CHB通道比较控制 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_compare_config
|
|||
|
|
{
|
|||
|
|
en_tim0_m23_crch0_csa_csb_t enCHxACmpCap; ///< CH0A比较/捕获功能选择
|
|||
|
|
en_tim0_m23_fltr_ocm_t enCHxACmpCtrl; ///< CH0A通道比较控制
|
|||
|
|
en_tim0_port_polarity_t enCHxAPolarity; ///< CH0A输出极性控制
|
|||
|
|
boolean_t bCHxACmpBufEn; ///< 比较A缓存功能 使能/禁止
|
|||
|
|
en_tim0_m23_cisa_cisb_t enCHxACmpIntSel; ///< CHA比较匹配中断选择
|
|||
|
|
|
|||
|
|
en_tim0_m23_crch0_csa_csb_t enCHxBCmpCap; ///< CH0B比较/捕获功能选择
|
|||
|
|
en_tim0_m23_fltr_ocm_t enCHxBCmpCtrl; ///< CH0B通道比较控制
|
|||
|
|
en_tim0_port_polarity_t enCHxBPolarity; ///< CH0B输出极性控制
|
|||
|
|
boolean_t bCHxBCmpBufEn; ///< 比较B缓存功能 使能/禁止
|
|||
|
|
en_tim0_m23_cisa_cisb_t enCHxBCmpIntSel; ///< CHB0比较匹配中断选择
|
|||
|
|
}stc_tim0_m23_compare_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief CHA/CHB通道捕获控制 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_input_config
|
|||
|
|
{
|
|||
|
|
en_tim0_m23_crch0_csa_csb_t enCHxACmpCap; ///< CH0A比较/捕获功能选择
|
|||
|
|
en_tim0_m23_crch0_cfx_crx_t enCHxACapSel; ///< CH0A捕获边沿选择
|
|||
|
|
en_tim0_flt_t enCHxAInFlt; ///< CH0A通道捕获滤波控制
|
|||
|
|
en_tim0_port_polarity_t enCHxAPolarity; ///< CH0A输入相位
|
|||
|
|
|
|||
|
|
en_tim0_m23_crch0_csa_csb_t enCHxBCmpCap; ///< CH0A比较/捕获功能选择
|
|||
|
|
en_tim0_m23_crch0_cfx_crx_t enCHxBCapSel; ///< CH0B捕获边沿选择
|
|||
|
|
en_tim0_flt_t enCHxBInFlt; ///< CH0B通道捕获滤波控制
|
|||
|
|
en_tim0_port_polarity_t enCHxBPolarity; ///< CH0B输入相位
|
|||
|
|
|
|||
|
|
}stc_tim0_m23_input_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ETR输入相位滤波配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_etr_input_config
|
|||
|
|
{
|
|||
|
|
en_tim0_port_polarity_t enETRPolarity; ///< ETR输入极性设置
|
|||
|
|
en_tim0_flt_t enETRFlt; ///< ETR滤波设置
|
|||
|
|
}stc_tim0_m23_etr_input_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 刹车BK输入相位滤波配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_bk_input_config
|
|||
|
|
{
|
|||
|
|
boolean_t bEnBrake; ///< 刹车使能
|
|||
|
|
boolean_t bEnVC0Brake; ///< 使能VC0刹车
|
|||
|
|
boolean_t bEnVC1Brake; ///< 使能VC1刹车
|
|||
|
|
boolean_t bEnSafetyBk; ///< 使能safety刹车
|
|||
|
|
boolean_t bEnBKSync; ///< TIM0/TIM1/TIM2刹车同步使能
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH0AStat; ///< 刹车时CHA端口状态设置
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH0BStat; ///< 刹车时CHB端口状态设置
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH1AStat; ///< 刹车时CHA端口状态设置
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH1BStat; ///< 刹车时CHB端口状态设置
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH2AStat; ///< 刹车时CHA端口状态设置
|
|||
|
|
en_tim0_m23_crchx_bks_t enBkCH2BStat; ///< 刹车时CHB端口状态设置
|
|||
|
|
en_tim0_port_polarity_t enBrakePolarity; ///< 刹车BK输入极性设置
|
|||
|
|
en_tim0_flt_t enBrakeFlt; ///< 刹车BK滤波设置
|
|||
|
|
}stc_tim0_m23_bk_input_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 死区功能配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_dt_config
|
|||
|
|
{
|
|||
|
|
boolean_t bEnDeadTime; ///< 刹车时CHA端口状态设置
|
|||
|
|
uint8_t u8DeadTimeValue; ///< 刹车时CHA端口状态设置
|
|||
|
|
}stc_tim0_m23_dt_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 触发ADC配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_adc_trig_config
|
|||
|
|
{
|
|||
|
|
boolean_t bEnTrigADC; ///< 触发ADC全局控制
|
|||
|
|
boolean_t bEnUevTrigADC; ///< 事件更新触发ADC
|
|||
|
|
boolean_t bEnCH0ACmpTrigADC; ///< CH0A比较匹配触发ADC
|
|||
|
|
boolean_t bEnCH0BCmpTrigADC; ///< CH0B比较匹配触发ADC
|
|||
|
|
boolean_t bEnCH1ACmpTrigADC; ///< CH0A比较匹配触发ADC
|
|||
|
|
boolean_t bEnCH1BCmpTrigADC; ///< CH0B比较匹配触发ADC
|
|||
|
|
boolean_t bEnCH2ACmpTrigADC; ///< CH0A比较匹配触发ADC
|
|||
|
|
boolean_t bEnCH2BCmpTrigADC; ///< CH0B比较匹配触发ADC
|
|||
|
|
}stc_tim0_m23_adc_trig_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief DMA触发 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_trig_dma_config
|
|||
|
|
{
|
|||
|
|
boolean_t bUevTrigDMA; ///< 更新 触发DMA使能
|
|||
|
|
boolean_t bTITrigDMA; ///< Trig 触发DMA功能
|
|||
|
|
boolean_t bCmpA0TrigDMA; ///< CH0A捕获比较触发DMA使能
|
|||
|
|
boolean_t bCmpB0TrigDMA; ///< CH0B捕获比较触发DMA使能
|
|||
|
|
boolean_t bCmpA1TrigDMA; ///< CH1A捕获比较触发DMA使能
|
|||
|
|
boolean_t bCmpB1TrigDMA; ///< CH1B捕获比较触发DMA使能
|
|||
|
|
boolean_t bCmpA2TrigDMA; ///< CH2A捕获比较触发DMA使能
|
|||
|
|
boolean_t bCmpB2TrigDMA; ///< CH2B捕获比较触发DMA使能
|
|||
|
|
en_tim0_m23_mscr_ccds_t enCmpUevTrigDMA; ///< 比较模式下DMA比较触发选择
|
|||
|
|
}stc_tim0_m23_trig_dma_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief 主从模式 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_master_slave_config
|
|||
|
|
{
|
|||
|
|
en_tim0_m23_mscr_msm_t enMasterSlaveSel; ///< 主从模式选择
|
|||
|
|
en_tim0_m23_mscr_mms_t enMasterSrc; ///< 主模式触发源选择
|
|||
|
|
en_tim0_m23_mscr_sms_t enSlaveModeSel; ///< 从模式选择
|
|||
|
|
en_tim0_mscr_ts_t enTsSel; ///< 触发输入源选择
|
|||
|
|
}stc_tim0_m23_master_slave_config_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief OCREF清除功能 配置结构体定义(模式23)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_tim0_m23_OCREF_Clr_config
|
|||
|
|
{
|
|||
|
|
en_tim0_m23ce_occs_t enOCRefClrSrcSel; ///< OCREF清除源选择
|
|||
|
|
boolean_t bVCClrEn; ///< 是否使能来自VC的OCREF_Clr
|
|||
|
|
}stc_tim0_m23_OCREF_Clr_config_t;
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global variable declarations ('extern', definition in C source)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global function prototypes (definition in C source)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
//中断相关函数
|
|||
|
|
|
|||
|
|
//中断标志获取
|
|||
|
|
boolean_t Tim0_GetIntFlag(en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
//中断标志清除
|
|||
|
|
en_result_t Tim0_ClearIntFlag(en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
//所有中断标志清除
|
|||
|
|
en_result_t Tim0_ClearAllIntFlag(void);
|
|||
|
|
//模式0中断使能
|
|||
|
|
en_result_t Tim0_Mode0_EnableIrq(void);
|
|||
|
|
//模式1中断使能
|
|||
|
|
en_result_t Tim0_Mode1_EnableIrq (en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
//模式2中断使能
|
|||
|
|
en_result_t Tim0_Mode23_EnableIrq (en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
//模式0中断禁止
|
|||
|
|
en_result_t Tim0_Mode0_DisableIrq(void);
|
|||
|
|
//模式1中断禁止
|
|||
|
|
en_result_t Tim0_Mode1_DisableIrq (en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
//模式2中断禁止
|
|||
|
|
en_result_t Tim0_Mode23_DisableIrq (en_tim0_irq_type_t enTim0Irq);
|
|||
|
|
|
|||
|
|
|
|||
|
|
//模式0初始化及相关功能操作
|
|||
|
|
|
|||
|
|
//timer配置及初始化
|
|||
|
|
en_result_t Tim0_Mode0_Init(stc_tim0_mode0_config_t* pstcConfig);
|
|||
|
|
//timer 启动/停止
|
|||
|
|
en_result_t Tim0_M0_Run(void);
|
|||
|
|
en_result_t Tim0_M0_Stop(void);
|
|||
|
|
//重载值设置
|
|||
|
|
en_result_t Tim0_M0_ARRSet(uint16_t u16Data);
|
|||
|
|
//16位计数值设置/获取
|
|||
|
|
en_result_t Tim0_M0_Cnt16Set(uint16_t u16Data);
|
|||
|
|
uint16_t Tim0_M0_Cnt16Get(void);
|
|||
|
|
//32位计数值设置/获取
|
|||
|
|
en_result_t Tim0_M0_Cnt32Set(uint32_t u32Data);
|
|||
|
|
uint32_t Tim0_M0_Cnt32Get(void);
|
|||
|
|
//翻转输出使能/禁止设定
|
|||
|
|
en_result_t Tim0_M0_EnTOG_Output(boolean_t bEnOutput);
|
|||
|
|
|
|||
|
|
|
|||
|
|
//模式1初始化及相关功能操作
|
|||
|
|
|
|||
|
|
//timer配置及初始化
|
|||
|
|
en_result_t Tim0_Mode1_Init(stc_tim0_mode1_config_t* pstcConfig);
|
|||
|
|
//PWC 输入配置
|
|||
|
|
en_result_t Tim0_M1_Input_Config(stc_tim0_pwc_input_config_t* pstcConfig);
|
|||
|
|
//PWC测量边沿起始结束选择
|
|||
|
|
en_result_t Tim0_M1_PWC_Edge_Sel(en_tim0_m1cr_Edge_t enEdgeSel);
|
|||
|
|
//timer 启动/停止
|
|||
|
|
en_result_t Tim0_M1_Run(void);
|
|||
|
|
en_result_t Tim0_M1_Stop(void);
|
|||
|
|
//16位计数值设置/获取
|
|||
|
|
en_result_t Tim0_M1_Cnt16Set(uint16_t u16Data);
|
|||
|
|
uint16_t Tim0_M1_Cnt16Get(void);
|
|||
|
|
//脉冲宽度测量结果数值获取
|
|||
|
|
uint16_t Tim0_M1_PWC_CapValueGet(void);
|
|||
|
|
|
|||
|
|
|
|||
|
|
//模式1初始化及相关功能操作
|
|||
|
|
|
|||
|
|
//timer配置及初始化
|
|||
|
|
en_result_t Tim0_Mode23_Init(stc_tim0_mode23_config_t* pstcConfig);
|
|||
|
|
//timer 启动/停止
|
|||
|
|
en_result_t Tim0_M23_Run(void);
|
|||
|
|
en_result_t Tim0_M23_Stop(void);
|
|||
|
|
//PWM输出使能
|
|||
|
|
en_result_t Tim0_M23_EnPWM_Output(boolean_t bEnOutput, boolean_t bEnAutoOutput);
|
|||
|
|
//重载值设置
|
|||
|
|
en_result_t Tim0_M23_ARRSet(uint16_t u16Data, boolean_t bArrBufEn);
|
|||
|
|
//16位计数值设置/获取
|
|||
|
|
en_result_t Tim0_M23_Cnt16Set(uint16_t u16Data);
|
|||
|
|
uint16_t Tim0_M23_Cnt16Get(void);
|
|||
|
|
//比较捕获寄存器CCR0A/CCR0B设置/读取
|
|||
|
|
en_result_t Tim0_M23_CCR_Set(en_tim0_m23_ccrx_t enCCRSel, uint16_t u16Data);
|
|||
|
|
uint16_t Tim0_M23_CCR_Get(en_tim0_m23_ccrx_t enCCRSel);
|
|||
|
|
//PWM互补输出模式下，GATE功能选择
|
|||
|
|
en_result_t Tim0_M23_GateFuncSel(stc_tim0_m23_gate_config_t* pstcConfig);
|
|||
|
|
//主从模式配置
|
|||
|
|
en_result_t Tim0_M23_MasterSlave_Set(stc_tim0_m23_master_slave_config_t* pstcConfig);
|
|||
|
|
//CH0A/CH0B比较通道控制
|
|||
|
|
en_result_t Tim0_M23_PortOutput_Config(en_tim0_channel_t enTim0Chx, stc_tim0_m23_compare_config_t* pstcConfig);
|
|||
|
|
//CH0A/CH0B输入控制
|
|||
|
|
en_result_t Tim0_M23_PortInput_Config(en_tim0_channel_t enTim0Chx, stc_tim0_m23_input_config_t* pstcConfig);
|
|||
|
|
//ERT输入控制
|
|||
|
|
en_result_t Tim0_M23_ETRInput_Config(stc_tim0_m23_etr_input_config_t* pstcConfig);
|
|||
|
|
//刹车BK输入控制
|
|||
|
|
en_result_t Tim0_M23_BrakeInput_Config(stc_tim0_m23_bk_input_config_t* pstcConfig);
|
|||
|
|
//触发ADC控制
|
|||
|
|
en_result_t Tim0_M23_TrigADC_Config(stc_tim0_m23_adc_trig_config_t* pstcConfig);
|
|||
|
|
//死区功能
|
|||
|
|
en_result_t Tim0_M23_DT_Config(stc_tim0_m23_dt_config_t* pstcConfig);
|
|||
|
|
//重复周期设置
|
|||
|
|
en_result_t Tim0_M23_SetValidPeriod(uint8_t u8ValidPeriod);
|
|||
|
|
//OCREF清除功能
|
|||
|
|
en_result_t Tim0_M23_OCRefClr(stc_tim0_m23_OCREF_Clr_config_t* pstcConfig);
|
|||
|
|
//使能DMA传输
|
|||
|
|
en_result_t Tim0_M23_EnDMA(stc_tim0_m23_trig_dma_config_t* pstcConfig);
|
|||
|
|
//捕获比较A软件触发
|
|||
|
|
en_result_t Tim0_M23_EnSwTrigCapCmpA(en_tim0_channel_t enTim0Chx);
|
|||
|
|
//捕获比较B软件触发
|
|||
|
|
en_result_t Tim0_M23_EnSwTrigCapCmpB(en_tim0_channel_t enTim0Chx);
|
|||
|
|
//软件更新使能
|
|||
|
|
en_result_t Tim0_M23_EnSwUev(void);
|
|||
|
|
//软件触发使能
|
|||
|
|
en_result_t Tim0_M23_EnSwTrig(void);
|
|||
|
|
//软件刹车使能
|
|||
|
|
en_result_t Tim0_M23_EnSwBk(void);
|
|||
|
|
|
|||
|
|
|
|||
|
|
//@} // Tim0Group
|
|||
|
|
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
|
|||
|
|
#endif /* __BT_H__ */
|
|||
|
|
/******************************************************************************
|
|||
|
|
* EOF (not truncated)
|
|||
|
|
*****************************************************************************/
|
|||
|
|
|
|||
|
|
|