libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc

217 lines
7.5 KiB
Plaintext
Raw Normal View History

1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
#MicroXplorer Configuration settings - do not modify
File.Version=6
KeepUserPlacement=true
Mcu.Family=STM32L4
Mcu.IP0=NVIC
Mcu.IP1=RCC
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
Mcu.IP2=SPI1
Mcu.IP3=SYS
Mcu.IP4=USART1
Mcu.IP5=USART2
Mcu.IPNb=6
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
Mcu.Name=STM32L452R(C-E)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC13
Mcu.Pin1=PC14-OSC32_IN (PC14)
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
Mcu.Pin10=PA7
Mcu.Pin11=PA9
Mcu.Pin12=PA10
Mcu.Pin13=PA13 (JTMS/SWDIO)
Mcu.Pin14=PA14 (JTCK/SWCLK)
Mcu.Pin15=PB3 (JTDO/TRACESWO)
Mcu.Pin16=VP_SYS_VS_Systick
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
Mcu.Pin2=PC15-OSC32_OUT (PC15)
Mcu.Pin3=PH0-OSC_IN (PH0)
Mcu.Pin4=PH1-OSC_OUT (PH1)
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
Mcu.Pin5=PA1
Mcu.Pin6=PA2
Mcu.Pin7=PA3
Mcu.Pin8=PA5
Mcu.Pin9=PA6
Mcu.PinsNb=17
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32L452RETx
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
MxCube.Version=5.3.0
MxDb.Version=DB.5.0.30
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
PA1.Mode=Full_Duplex_Master
PA1.Signal=SPI1_SCK
[uart] Modify the uart file to configure uart_pin for pullup
2021-07-07 17:40:55 +08:00
PA9.GPIOParameters=GPIO_PuPd
PA9.GPIO_PuPd=GPIO_PULLUP
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PA10.GPIOParameters=GPIO_PuPd
PA10.GPIO_PuPd=GPIO_PULLUP
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
PA13\ (JTMS/SWDIO).GPIOParameters=GPIO_Label
PA13\ (JTMS/SWDIO).GPIO_Label=TMS
PA13\ (JTMS/SWDIO).Locked=true
PA13\ (JTMS/SWDIO).Mode=Serial_Wire
PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO
PA14\ (JTCK/SWCLK).GPIOParameters=GPIO_Label
PA14\ (JTCK/SWCLK).GPIO_Label=TCK
PA14\ (JTCK/SWCLK).Locked=true
PA14\ (JTCK/SWCLK).Mode=Serial_Wire
PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
PA2.GPIO_Label=USART_TX
PA2.GPIO_Mode=GPIO_MODE_AF_PP
[uart] Modify the uart file to configure uart_pin for pullup
2021-07-07 17:40:55 +08:00
PA2.GPIO_PuPd=GPIO_PULLUP
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
PA2.Locked=true
PA2.Mode=Asynchronous
PA2.Signal=USART2_TX
PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
PA3.GPIO_Label=USART_RX
PA3.GPIO_Mode=GPIO_MODE_AF_PP
[uart] Modify the uart file to configure uart_pin for pullup
2021-07-07 17:40:55 +08:00
PA3.GPIO_PuPd=GPIO_PULLUP
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
PA3.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
PA3.Locked=true
PA3.Mode=Asynchronous
PA3.Signal=USART2_RX
PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP
PA5.GPIO_Label=LD2 [green Led]
PA5.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP
PA5.GPIO_PuPd=GPIO_NOPULL
PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
PA5.Locked=true
PA5.Signal=GPIO_Output
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
PA6.Mode=Full_Duplex_Master
PA6.Signal=SPI1_MISO
PA7.Mode=Full_Duplex_Master
PA7.Signal=SPI1_MOSI
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
PB3\ (JTDO/TRACESWO).GPIOParameters=GPIO_Label
PB3\ (JTDO/TRACESWO).GPIO_Label=SWO
PB3\ (JTDO/TRACESWO).Locked=true
PB3\ (JTDO/TRACESWO).Signal=SYS_JTDO-SWO
PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
PC13.GPIO_Label=B1 [Blue PushButton]
PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
PC13.GPIO_PuPd=GPIO_NOPULL
PC13.Locked=true
PC13.Signal=GPXTI13
PC14-OSC32_IN\ (PC14).Locked=true
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
PC15-OSC32_OUT\ (PC15).Locked=true
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
PCC.Checker=true
PCC.Line=STM32L4x2
PCC.MCU=STM32L452R(C-E)Tx
PCC.PartNumber=STM32L452RETx
PCC.Seq0=0
PCC.Series=STM32L4
PCC.Temperature=25
PCC.Vdd=3.0
PH0-OSC_IN\ (PH0).Locked=true
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
PH1-OSC_OUT\ (PH1).Locked=true
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32L452RETx
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.14.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=CubeMX_Config.ioc
ProjectManager.ProjectName=CubeMX_Config
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true
RCC.ADCFreq_Value=64000000
RCC.AHBFreq_Value=80000000
RCC.APB1Freq_Value=80000000
RCC.APB1TimFreq_Value=80000000
RCC.APB2Freq_Value=80000000
RCC.APB2TimFreq_Value=80000000
RCC.CortexFreq_Value=80000000
RCC.DFSDMFreq_Value=80000000
RCC.FCLKCortexFreq_Value=80000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=80000000
RCC.HSE_VALUE=8000000
RCC.HSI48_VALUE=48000000
RCC.HSI_VALUE=16000000
RCC.I2C1Freq_Value=80000000
RCC.I2C2Freq_Value=80000000
RCC.I2C3Freq_Value=80000000
RCC.I2C4Freq_Value=80000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
RCC.LPTIM1Freq_Value=80000000
RCC.LPTIM2Freq_Value=80000000
RCC.LPUART1Freq_Value=80000000
RCC.LSCOPinFreq_Value=32000
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=80000000
RCC.MSI_VALUE=4000000
RCC.PLLN=10
RCC.PLLPoutputFreq_Value=22857142.85714286
RCC.PLLQoutputFreq_Value=80000000
RCC.PLLRCLKFreq_Value=80000000
RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
RCC.PLLSAI1QoutputFreq_Value=64000000
RCC.PLLSAI1RoutputFreq_Value=64000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
RCC.PREFETCH_ENABLE=1
RCC.PWRFreq_Value=80000000
RCC.RNGFreq_Value=64000000
RCC.SAI1Freq_Value=18285714.285714287
RCC.SDMMCFreq_Value=64000000
RCC.SWPMI1Freq_Value=80000000
RCC.SYSCLKFreq_VALUE=80000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.UART4Freq_Value=80000000
RCC.UART5Freq_Value=80000000
RCC.USART1Freq_Value=80000000
RCC.USART2Freq_Value=80000000
RCC.USART3Freq_Value=80000000
RCC.USBFreq_Value=64000000
RCC.VCOInputFreq_Value=16000000
RCC.VCOOutputFreq_Value=160000000
RCC.VCOSAI1OutputFreq_Value=128000000
RCC.VCOSAI2OutputFreq_Value=128000000
SH.GPXTI13.0=GPIO_EXTI13
SH.GPXTI13.ConfNb=1
[bsp] [stm32] fix stm32l452 Kconfig error
2019-08-31 13:26:55 +08:00
SPI1.CalculateBaudRate=40.0 MBits/s
SPI1.Direction=SPI_DIRECTION_2LINES
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
SPI1.Mode=SPI_MODE_MASTER
SPI1.VirtualType=VM_MASTER
USART1.IPParameters=VirtualMode-Asynchronous
USART1.VirtualMode-Asynchronous=VM_ASYNC
1. Add bsp stm32l452-st-nucleo. 2. Bsp stm32l452-st-nucleo has been tested with NUCLEO-L452RE board. 3. Modify the applications SConscript of bsp stm32f103-yf-ufun, using new method. 4. Modify README of bsp stm32f072-st-nucleo.
2019-06-08 13:12:34 +08:00
USART2.IPParameters=VirtualMode-Asynchronous
USART2.VirtualMode-Asynchronous=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=NUCLEO-L452RE
boardIOC=true