rt-thread/bsp/nrf52832/nRF5_SDK_13.0.0_04a0bfd/components/boards/pca10040.h

183 lines
7.5 KiB
C
Raw Normal View History

2017-05-15 16:12:15 +08:00
/**
* Copyright (c) 2014 - 2017, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef PCA10040_H
#define PCA10040_H
#ifdef __cplusplus
extern "C" {
#endif
#include "nrf_gpio.h"
// LEDs definitions for PCA10040
#define LEDS_NUMBER 4
#define LED_START 17
#define LED_1 17
#define LED_2 18
#define LED_3 19
#define LED_4 20
#define LED_STOP 20
#define LEDS_ACTIVE_STATE 0
#define LEDS_INV_MASK LEDS_MASK
#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
#define BSP_LED_0 LED_1
#define BSP_LED_1 LED_2
#define BSP_LED_2 LED_3
#define BSP_LED_3 LED_4
#define BUTTONS_NUMBER 4
#define BUTTON_START 13
#define BUTTON_1 13
#define BUTTON_2 14
#define BUTTON_3 15
#define BUTTON_4 16
#define BUTTON_STOP 16
#define BUTTON_PULL NRF_GPIO_PIN_PULLUP
#define BUTTONS_ACTIVE_STATE 0
#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
#define BSP_BUTTON_0 BUTTON_1
#define BSP_BUTTON_1 BUTTON_2
#define BSP_BUTTON_2 BUTTON_3
#define BSP_BUTTON_3 BUTTON_4
#define RX_PIN_NUMBER 8
#define TX_PIN_NUMBER 6
#define CTS_PIN_NUMBER 7
#define RTS_PIN_NUMBER 5
#define HWFC true
#define SPIS_MISO_PIN 28 // SPI MISO signal.
#define SPIS_CSN_PIN 12 // SPI CSN signal.
#define SPIS_MOSI_PIN 25 // SPI MOSI signal.
#define SPIS_SCK_PIN 29 // SPI SCK signal.
#define SPIM0_SCK_PIN 29 // SPI clock GPIO pin number.
#define SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number.
#define SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number.
#define SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number.
#define SPIM1_SCK_PIN 2 // SPI clock GPIO pin number.
#define SPIM1_MOSI_PIN 3 // SPI Master Out Slave In GPIO pin number.
#define SPIM1_MISO_PIN 4 // SPI Master In Slave Out GPIO pin number.
#define SPIM1_SS_PIN 5 // SPI Slave Select GPIO pin number.
#define SPIM2_SCK_PIN 12 // SPI clock GPIO pin number.
#define SPIM2_MOSI_PIN 13 // SPI Master Out Slave In GPIO pin number.
#define SPIM2_MISO_PIN 14 // SPI Master In Slave Out GPIO pin number.
#define SPIM2_SS_PIN 15 // SPI Slave Select GPIO pin number.
// serialization APPLICATION board - temp. setup for running serialized MEMU tests
#define SER_APP_RX_PIN 23 // UART RX pin number.
#define SER_APP_TX_PIN 24 // UART TX pin number.
#define SER_APP_CTS_PIN 2 // UART Clear To Send pin number.
#define SER_APP_RTS_PIN 25 // UART Request To Send pin number.
#define SER_APP_SPIM0_SCK_PIN 27 // SPI clock GPIO pin number.
#define SER_APP_SPIM0_MOSI_PIN 2 // SPI Master Out Slave In GPIO pin number
#define SER_APP_SPIM0_MISO_PIN 26 // SPI Master In Slave Out GPIO pin number
#define SER_APP_SPIM0_SS_PIN 23 // SPI Slave Select GPIO pin number
#define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number
#define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number
// serialization CONNECTIVITY board
#define SER_CON_RX_PIN 24 // UART RX pin number.
#define SER_CON_TX_PIN 23 // UART TX pin number.
#define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false.
#define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false.
#define SER_CON_SPIS_SCK_PIN 27 // SPI SCK signal.
#define SER_CON_SPIS_MOSI_PIN 2 // SPI MOSI signal.
#define SER_CON_SPIS_MISO_PIN 26 // SPI MISO signal.
#define SER_CON_SPIS_CSN_PIN 23 // SPI CSN signal.
#define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number.
#define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number.
#define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip
// Arduino board mappings
#define ARDUINO_SCL_PIN 27 // SCL signal pin
#define ARDUINO_SDA_PIN 26 // SDA signal pin
#define ARDUINO_AREF_PIN 2 // Aref pin
#define ARDUINO_13_PIN 25 // Digital pin 13
#define ARDUINO_12_PIN 24 // Digital pin 12
#define ARDUINO_11_PIN 23 // Digital pin 11
#define ARDUINO_10_PIN 22 // Digital pin 10
#define ARDUINO_9_PIN 20 // Digital pin 9
#define ARDUINO_8_PIN 19 // Digital pin 8
#define ARDUINO_7_PIN 18 // Digital pin 7
#define ARDUINO_6_PIN 17 // Digital pin 6
#define ARDUINO_5_PIN 16 // Digital pin 5
#define ARDUINO_4_PIN 15 // Digital pin 4
#define ARDUINO_3_PIN 14 // Digital pin 3
#define ARDUINO_2_PIN 13 // Digital pin 2
#define ARDUINO_1_PIN 12 // Digital pin 1
#define ARDUINO_0_PIN 11 // Digital pin 0
#define ARDUINO_A0_PIN 3 // Analog channel 0
#define ARDUINO_A1_PIN 4 // Analog channel 1
#define ARDUINO_A2_PIN 28 // Analog channel 2
#define ARDUINO_A3_PIN 29 // Analog channel 3
#define ARDUINO_A4_PIN 30 // Analog channel 4
#define ARDUINO_A5_PIN 31 // Analog channel 5
// Low frequency clock source to be used by the SoftDevice
#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
.rc_ctiv = 0, \
.rc_temp_ctiv = 0, \
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
#ifdef __cplusplus
}
#endif
#endif // PCA10040_H