rt-thread/bsp/nuvoton_nuc472/Libraries/StdDriver/inc/cap.h

170 lines
9.5 KiB
C
Raw Normal View History

2017-12-17 12:08:31 +08:00
/**************************************************************************//**
* @file cap.h
* @version V0.10
* $Revision: 17 $
* $Date: 15/10/22 10:00a $
* @brief NUC470 series Image Capture Driver Header File
*
* @note
* Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved.
*
******************************************************************************/
#ifndef __CAP_H__
#define __CAP_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
@{
*/
/** @addtogroup NUC472_442_CAP_Driver CAP Driver
@{
*/
/** @addtogroup NUC472_442_CAP_EXPORTED_CONSTANTS CAP Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* VINCTRL constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAP_CTL_CAPEN (1ul<<CAP_CTL_CAPEN_Pos) /*!< CAP CTL setting for enabling capture engine mode \hideinitializer */
#define CAP_CTL_ADDRSW (1ul<<CAP_CTL_ADDRSW_Pos) /*!< CAP CTL setting for packet buffer address switch \hideinitializer */
#define CAP_CTL_PKTEN (1ul<<CAP_CTL_PKTEN_Pos) /*!< CAP CTL setting for enabling packet output mode \hideinitializer */
#define CAP_CTL_PLNEN (1ul<<CAP_CTL_PLNEN_Pos) /*!< CAP CTL setting for enabling planar output mode \hideinitializer */
#define CAP_CTL_SHUTTER (1ul<<CAP_CTL_SHUTTER_Pos) /*!< CAP CTL setting for enabling shutter mode \hideinitializer */
#define CAP_CTL_UPDATE (1ul<<CAP_CTL_UPDATE_Pos) /*!< CAP CTL setting for enabling update register at new frame \hideinitializer */
#define CAP_CTL_RESET (1ul<<CAP_CTL_VPRST_Pos) /*!< CAP CTL setting for capture reset \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CAPPAR constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAP_PAR_INFMT_YUV422 (0ul<<CAP_PAR_INFMT_Pos) /*!< CAP PAR setting for Sensor Input Data YUV422 Format \hideinitializer */
#define CAP_PAR_INFMT_RGB565 (1ul<<CAP_PAR_INFMT_Pos) /*!< CAP PAR setting for Sensor Input Data RGB565 Format \hideinitializer */
#define CAP_PAR_SENTYPE_CCIR601 (0ul<<CAP_PAR_SENTYPE_Pos) /*!< CAP PAR setting for Sensor Input CCIR601 Type \hideinitializer */
#define CAP_PAR_SENTYPE_CCIR656 (1ul<<CAP_PAR_SENTYPE_Pos) /*!< CAP PAR setting for Sensor Input CCIR656 Type \hideinitializer */
#define CAP_PAR_INDATORD_YUYV (0x0ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, YUYV \hideinitializer */
#define CAP_PAR_INDATORD_YVYU (0x1ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, YVYU \hideinitializer */
#define CAP_PAR_INDATORD_UYVY (0x2ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, UYVY \hideinitializer */
#define CAP_PAR_INDATORD_VYUY (0x3ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, VYUY \hideinitializer */
#define CAP_PAR_INDATORD_RGGB (0x0ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: R[0:4] G[5:8], 1byte G[0:2] R[3:8] \hideinitializer */
#define CAP_PAR_INDATORD_BGGR (0x1ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: b[0:4] G[5:8], 1byte G[0:2] R[3:8] \hideinitializer */
#define CAP_PAR_INDATORD_GBRG (0x2ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: G[0:3] G[4:8], 1byte G[0:4] G[5:8] \hideinitializer */
#define CAP_PAR_INDATORD_GRBG (0x3ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: G[0:3] G[4:8], 1byte G[0:4] G[5:8] \hideinitializer */
#define CAP_PAR_OUTFMT_YUV422 (0x0ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data YUV422 Format Output to System Memory \hideinitializer */
#define CAP_PAR_OUTFMT_ONLY_Y (0x1ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data ONLY_Y Format Output to System Memory \hideinitializer */
#define CAP_PAR_OUTFMT_RGB555 (0x2ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data RGB555 Format Output to System Memory \hideinitializer */
#define CAP_PAR_OUTFMT_RGB565 (0x3ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data RGB565 Format Output to System Memory \hideinitializer */
#define CAP_PAR_PLNFMT_YUV422 (0x0ul<<CAP_PAR_PLNFMT_Pos) /*!< CAP PAR setting for Planar Output YUV422 Format \hideinitializer */
#define CAP_PAR_PLNFMT_YUV420 (0x1ul<<CAP_PAR_PLNFMT_Pos) /*!< CAP PAR setting for Planar Output YUV420 Format \hideinitializer */
#define CAP_PAR_VSP_LOW (0x0ul<<CAP_PAR_VSP_Pos) /*!< CAP PAR setting for Sensor Vsync Polarity \hideinitializer */
#define CAP_PAR_VSP_HIGH (0x1ul<<CAP_PAR_VSP_Pos) /*!< CAP PAR setting for Sensor Vsync Polarity \hideinitializer */
#define CAP_PAR_HSP_LOW (0x0ul<<CAP_PAR_HSP_Pos) /*!< CAP PAR setting for Sensor Hsync Polarity \hideinitializer */
#define CAP_PAR_HSP_HIGH (0x1ul<<CAP_PAR_HSP_Pos) /*!< CAP PAR setting for Sensor Hsync Polarity \hideinitializer */
#define CAP_PAR_PCLKP_LOW (0x0ul<<CAP_PAR_PCLKP_Pos) /*!< CAP PAR setting for Sensor Pixel Clock Polarity \hideinitializer */
#define CAP_PAR_PCLKP_HIGH (0x1ul<<CAP_PAR_PCLKP_Pos) /*!< CAP PAR setting for Sensor Pixel Clock Polarity \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* VININT constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define CAP_INT_VIEN_ENABLE (0x1ul<<CAP_INT_VIEN_Pos) /*!< VININT setting for Frame End Interrupt enable \hideinitializer */
#define CAP_INT_MEIEN_ENABLE (0x1ul<<CAP_INT_MEIEN_Pos) /*!< VININT setting for Bus Master Transfer Error Interrupt enable \hideinitializer */
#define CAP_INT_ADDRMIEN_ENABLE (0x1ul<<CAP_INT_ADDRMIEN_Pos) /*!< VININT setting for Memory Address Match Interrupt enable \hideinitializer */
#define CAP_INT_MDIEN_ENABLE (0x1ul<<CAP_INT_MDIEN_Pos) /*!< VININT setting for Motion Detection Output Finish Interrupt Enable enable \hideinitializer */
static uint32_t u32EscapeFrame = 0;
/*---------------------------------------------------------------------------------------------------------*/
/* Define Error Code */
/*---------------------------------------------------------------------------------------------------------*/
#define CAP_INVALID_INT ((int32_t)(0xFFFFFFFF-1))
#define CAP_INVALID_BUF ((int32_t)(0xFFFFFFFF-2))
#define CAP_INVALID_PIPE ((int32_t)(0xFFFFFFFF-3))
/*@}*/ /* end of group NUC472_442_CAP_EXPORTED_CONSTANTS */
/** @addtogroup NUC472_442_CAP_EXPORTED_FUNCTIONS CAP Exported Functions
@{
*/
/**
* @brief Is CAP module Enable
*
* @return FALSE(Enable) or TRUE(Disable)
*
* @details Check Image Capture Interface module Enable or Disable
* \hideinitializer
*/
#define CAP_IS_STOPPED() ((ICAP->CTL & CAP_CTL_CAPEN_Msk)?0:1)
/**
* @brief Clear CAP flag
*
* @param[in] u32IntMask interrupt flags settings. It could be
* - \ref CAP_INT_VINTF_Msk
* - \ref CAP_INT_MEINTF_Msk
* - \ref CAP_INT_ADDRMINTF_Msk
* - \ref CAP_INT_MDINTF_Msk
*
* @return TRUE(Enable) or FALSE(Disable)
*
* @details Clear Image Capture Interface interrupt flag
* \hideinitializer
*/
#define CAP_CLR_INT_FLAG(u32IntMask) (ICAP->INT |=u32IntMask)
/**
* @brief Get CAP Interrupt status
*
* @return TRUE(Enable) or FALSE(Disable)
*
* @details Get Image Capture Interface interrupt status.
* \hideinitializer
*/
#define CAP_GET_INT_STS() (ICAP->INT)
void CAP_Open(uint32_t u32InFormat, uint32_t u32OutFormet);
void CAP_SetCroppingWindow(uint32_t u32VStart,uint32_t u32HStart, uint32_t u32Height, uint32_t u32Width);
void CAP_SetPacketBuf(uint32_t u32Address );
void CAP_SetPlanarBuf(uint32_t u32YAddr, uint32_t u32UAddr, uint32_t u32VAddr);
void CAP_Close(void);
void CAP_EnableInt(uint32_t u32IntMask);
void CAP_DisableInt(uint32_t u32IntMask);
void CAP_Start(void);
void CAP_Stop(uint32_t u32FrameComplete);
void CAP_SetPacketScaling(uint32_t u32VNumerator, uint32_t u32VDenominator, uint32_t u32HNumerator, uint32_t u32HDenominator);
void CAP_SetPlanarScaling(uint32_t u32VNumerator, uint32_t u32VDenominator, uint32_t u32HNumerator, uint32_t u32HDenominator);
void CAP_SetPacketStride(uint32_t u32Stride );
void CAP_SetPlanarStride(uint32_t u32Stride );
void CAP_EnableMotionDet(uint32_t u32Freq, uint32_t u32BlockSize, uint32_t u32Format, uint32_t u32Threshold, uint32_t u32YDetAddr, uint32_t u32DetAddr);
void CAP_DisableMotionDet(void);
/*@}*/ /* end of group NUC472_442_CAP_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group NUC472_442_CAP_Driver */
/*@}*/ /* end of group NUC472_442_Device_Driver */
#ifdef __cplusplus
}
#endif
#endif //__CAP_H__
/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/