rt-thread/bsp/ft32/libraries/FT32F0xx/FT32F0xx_Driver/Src/ft32f0xx_debug.c

/**
  ******************************************************************************
  * @file               ft32f0xx_debug.c
  * @author             FMD AE
  * @brief              This file provides firmware functions to manage the following
  *                     functionalities of the Debug MCU (DBGMCU) peripheral:
  *                 + Device and Revision ID management
  *                 + Peripherals Configuration
  * @version            V1.0.0
  * @data                   2021-07-01
    ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "ft32f0xx_debug.h"


#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)



/**
  * @brief  Returns the device revision identifier.
  * @param  None
  * @retval Device revision identifier
  */
uint32_t DBGMCU_GetREVID(void)
{
   return(DBGMCU->IDCODE >> 16);
}

/**
  * @brief  Returns the device identifier.
  * @param  None
  * @retval Device identifier
  */
uint32_t DBGMCU_GetDEVID(void)
{
   return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
}

/**
  * @}
  */
/**
  * @brief  Configures low power mode behavior when the MCU is in Debug mode.
  * @param  DBGMCU_Periph: specifies the low power mode.
  *          This parameter can be any combination of the following values:
  *             @arg DBGMCU_STOP: Keep debugger connection during STOP mode
  *             @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
  * @param  NewState: new state of the specified low power mode in Debug mode.
  *          This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    DBGMCU->CR |= DBGMCU_Periph;
  }
  else
  {
    DBGMCU->CR &= ~DBGMCU_Periph;
  }
}


/**
  * @brief  Configures APB1 peripheral behavior when the MCU is in Debug mode.
  * @param  DBGMCU_Periph: specifies the APB1 peripheral.
  *          This parameter can be any combination of the following values:
  *             @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
  *             @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
  *             @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
  *             @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
  *             @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
  *             @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped
  *                                   when Core is halted.
  *             @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
  *             @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
  *             @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped
  *                                             when Core is halted
  *             @arg DBGMCU_CAN1_STOP: Debug CAN1 stopped when Core is halted
  * @param  NewState: new state of the specified APB1 peripheral in Debug mode.
  *          This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    DBGMCU->APB1FZ |= DBGMCU_Periph;
  }
  else
  {
    DBGMCU->APB1FZ &= ~DBGMCU_Periph;
  }
}

/**
  * @brief  Configures APB2 peripheral behavior when the MCU is in Debug mode.
  * @param  DBGMCU_Periph: specifies the APB2 peripheral.
  *          This parameter can be any combination of the following values:
  *             @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
  *             @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
  *             @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
  *             @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
  * @param  NewState: new state of the specified APB2 peripheral in Debug mode.
  *          This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    DBGMCU->APB2FZ |= DBGMCU_Periph;
  }
  else
  {
    DBGMCU->APB2FZ &= ~DBGMCU_Periph;
  }
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT FMD *****END OF FILE****/