rt-thread/bsp/lm4f232/Libraries/driverlib/eeprom.h

//*****************************************************************************
//
// eeprom.h - Prototypes for the EEPROM driver.
//
// Copyright (c) 2010-2011 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
// 
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************

#ifndef __EEPROM_H__
#define __EEPROM_H__

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
//! \addtogroup eeprom_api
//! @{
//
//*****************************************************************************

//*****************************************************************************
//
// Values returned by EEPROMInit.
//
//*****************************************************************************

//
//! This value may be returned from a call to EEPROMInit().  It indicates that
//! no previous write operations were interrupted by a reset event and that the
//! EEPROM peripheral is ready for use.
//
#define EEPROM_INIT_OK      0

//
//! This value may be returned from a call to EEPROMInit().  It indicates that
//! a previous data or protection write operation was interrupted by a reset
//! event.  The EEPROM peripheral has recovered its state but the last write
//! operation may have been lost.  The application must check the validity of
//! data it has written and retry any writes as required.
//
#define EEPROM_INIT_RETRY   1

//
//! This value may be returned from a call to EEPROMInit(). It indicates that a
//! previous data or protection write operation was interrupted by a reset
//! event and that the EEPROM peripheral was unable to clean up after the
//! problem.  This situation may be resolved with another reset or may be fatal
//! depending upon the cause of the problem.  For example, if the voltage to
//! the part is unstable, retrying once the voltage has stabilized may clear
//! the error.
//
#define EEPROM_INIT_ERROR   2

//*****************************************************************************
//
// Error indicators returned by various EEPROM API calls.  These will be ORed
// together into the final return code.
//
//*****************************************************************************

//
//! This return code bit indicates that the EEPROM programming state machine
//! failed to write a value due to the voltage level dropping below that
//! required for EEPROM programming.  The operation may be retried once the
//! voltage stabilizes.
//
#define EEPROM_RC_INVPL             0x00000100

//
//! This return code bit indicates that an attempt was made to read from
//! the EEPROM while a write operation was in progress.
//
#define EEPROM_RC_WRBUSY            0x00000020

//
//! This return code bit indicates that an attempt was made to write a
//! value but the destination permissions disallow write operations.  This
//! may be due to the destination block being locked, access protection set
//! to prohibit writes or an attempt to write a password when one is already
//! written.
//
#define EEPROM_RC_NOPERM            0x00000010

//
//! This return code bit indicates that the EEPROM programming state machine
//! is currently copying to or from the internal copy buffer to make room for
//! a newly written value.  It is provided as a status indicator and does not
//! indicate an error.
//
#define EEPROM_RC_WKCOPY            0x00000008

//
//! This return code bit indicates that the EEPROM programming state machine
//! is currently erasing the internal copy buffer.  It is provided as a
//! status indicator and does not indicate an error.
//
#define EEPROM_RC_WKERASE           0x00000004

//
//! This return code bit indicates that the EEPROM programming state machine
//! is currently working.  No new write operations should be attempted until
//! this bit is clear.
//
#define EEPROM_RC_WORKING           0x00000001

//*****************************************************************************
//
// Values that can be passed to EEPROMBlockProtectSet() in the ulProtect
// parameter, and returned by EEPROMBlockProtectGet().
//
//*****************************************************************************

//
//! This bit may be ORed with the protection option passed to
//! EEPROMBlockProtectSet() or returned from EEPROMBlockProtectGet().  It
//! restricts EEPROM access to threads running in supervisor mode and prevents
//! access to an EEPROM block when the CPU is in user mode.
//
#define EEPROM_PROT_SUPERVISOR_ONLY 0x00000008

//
//! This value may be passed to EEPROMBlockProtectSet() or returned from
//! EEPROMBlockProtectGet().  It indicates that the block should offer
//! read/write access when no password is set or when a password is set and
//! the block is unlocked, and read-only access when a password is set but
//! the block is locked.
//
#define EEPROM_PROT_RW_LRO_URW      0x00000000

//
//! This value may be passed to EEPROMBlockProtectSet() or returned from
//! EEPROMBlockProtectGet().  It indicates that the block should offer neither
//! read nor write access unless it is protected by a password and unlocked.
//
#define EEPROM_PROT_NA_LNA_URW      0x00000001

//
//! This value may be passed to EEPROMBlockProtectSet() or returned from
//! EEPROMBlockProtectGet().  It indicates that the block should offer
//! read-only access when no password is set or when a password is set and the
//! block is unlocked.  When a password is set and the block is locked, neither
//! read nor write access is permitted.
//
#define EEPROM_PROT_RO_LNA_URO      0x00000002

//*****************************************************************************
//
//! This value may be passed to EEPROMIntEnable() and EEPROMIntDisable() and is
//! returned by EEPROMIntStatus() if an EEPROM interrupt is currently being
//! signaled.
//
//*****************************************************************************
#define EEPROM_INT_PROGRAM          0x00000004

//*****************************************************************************
//
//! Returns the EEPROM block number containing a given offset address.
//!
//! \param ulAddr is the linear, byte address of the EEPROM location whose
//! block number is to be returned.  This is a zero-based offset from the start
//! of the EEPROM storage.
//!
//! This macro may be used to translate an EEPROM address offset into a
//! block number suitable for use in any of the driver's block protection
//! functions.  The address provided is expressed as a byte offset from the
//! base of the EEPROM.
//!
//! \return Returns the zero-based block number which contains the passed
//! address.
//
//*****************************************************************************
#define EEPROMBlockFromAddr(ulAddr) ((ulAddr) >> 6)

//*****************************************************************************
//
//! Returns the offset address of the first word in an EEPROM block.
//!
//! \param ulBlock is the index of the EEPROM block whose first word address
//! is to be returned.
//!
//! This macro may be used to determine the address of the first word in a
//! given EEPROM block.  The address returned is expressed as a byte offset
//! from the base of EEPROM storage.
//!
//! \return Returns the address of the first word in the given EEPROM block.
//
//*****************************************************************************
#define EEPROMAddrFromBlock(ulBlock) ((ulBlock) << 6)

//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern unsigned long EEPROMInit(void);
extern unsigned long EEPROMSizeGet(void);
extern unsigned long EEPROMBlockCountGet(void);
extern void EEPROMRead(unsigned long *pulData, unsigned long ulAddress,
                       unsigned long ulCount);
extern unsigned long EEPROMProgram(unsigned long *pulData,
                                   unsigned long ulAddress,
                                   unsigned long ulCount);
extern unsigned long EEPROMProgramNonBlocking(unsigned long ulData,
                                              unsigned long ulAddress);
extern unsigned long EEPROMStatusGet(void);
extern unsigned long EEPROMMassErase(void);
extern unsigned long EEPROMBlockProtectGet(unsigned long ulBlock);
extern unsigned long EEPROMBlockProtectSet(unsigned long ulBlock,
                                           unsigned long ulProtect);
extern unsigned long EEPROMBlockPasswordSet(unsigned long ulBlock,
                                            unsigned long *pulPassword,
                                            unsigned long ulCount);
extern unsigned long EEPROMBlockLock(unsigned long ulBlock);
extern unsigned long EEPROMBlockUnlock(unsigned long ulBlock,
                                       unsigned long *pulPassword,
                                       unsigned long ulCount);
extern void EEPROMBlockHide(unsigned long ulBlock);
extern void EEPROMIntEnable(unsigned long ulIntFlags);
extern void EEPROMIntDisable(unsigned long ulIntFlags);
extern unsigned long EEPROMIntStatus(tBoolean bMasked);
extern void EEPROMIntClear(unsigned long ulIntFlags);

//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif // __EEPROM_H__