rt-thread/bsp/gd32303e-eval/Libraries/GD32F30x_standard_peripheral/Source/gd32f30x_pmu.c

343 lines
8.2 KiB
C
Raw Normal View History

2018-05-21 11:13:46 +08:00
/*!
\file gd32f30x_pmu.c
\brief PMU driver
*/
/*
Copyright (C) 2017 GigaDevice
2017-02-10, V1.0.0, firmware for GD32F30x
*/
#include "gd32f30x_pmu.h"
/*!
\brief reset PMU register
\param[in] none
\param[out] none
\retval none
*/
void pmu_deinit(void)
{
/* reset PMU */
rcu_periph_reset_enable(RCU_PMURST);
rcu_periph_reset_disable(RCU_PMURST);
}
/*!
\brief select low voltage detector threshold
\param[in] lvdt_n:
\arg PMU_LVDT_0: voltage threshold is 2.1V
\arg PMU_LVDT_1: voltage threshold is 2.3V
\arg PMU_LVDT_2: voltage threshold is 2.4V
\arg PMU_LVDT_3: voltage threshold is 2.6V
\arg PMU_LVDT_4: voltage threshold is 2.7V
\arg PMU_LVDT_5: voltage threshold is 2.9V
\arg PMU_LVDT_6: voltage threshold is 3.0V
\arg PMU_LVDT_7: voltage threshold is 3.1V
\param[out] none
\retval none
*/
void pmu_lvd_select(uint32_t lvdt_n)
{
/* disable LVD */
PMU_CTL &= ~PMU_CTL_LVDEN;
/* clear LVDT bits */
PMU_CTL &= ~PMU_CTL_LVDT;
/* set LVDT bits according to lvdt_n */
PMU_CTL |= lvdt_n;
/* enable LVD */
PMU_CTL |= PMU_CTL_LVDEN;
}
/*!
\brief select LDO output voltage
this bit set by software when the main PLL closed, before closing PLL, change the system clock to IRC16M or HXTAL
\param[in] ldo_output:
\arg PMU_LDOVS_LOW: low-driver mode enable in deep-sleep mode
\arg PMU_LDOVS_MID: low-driver mode disable in deep-sleep mode
\arg PMU_LDOVS_HIGH: low-driver mode disable in deep-sleep mode
\param[out] none
\retval none
*/
void pmu_ldo_output_select(uint32_t ldo_output)
{
PMU_CTL &= ~PMU_CTL_LDOVS;
PMU_CTL |= ldo_output;
}
/*!
\brief switch high-driver mode
this bit set by software only when IRC16M or HXTAL used as system clock
\param[in] highdr_switch:
\arg PMU_HIGHDR_SWITCH_NONE: disable high-driver mode switch
\arg PMU_HIGHDR_SWITCH_EN: enable high-driver mode switch
\param[out] none
\retval none
*/
void pmu_highdriver_switch_select(uint32_t highdr_switch)
{
/* wait for HDRF flag set */
while(SET != pmu_flag_get(PMU_FLAG_HDRF)){
}
PMU_CTL &= ~PMU_CTL_HDS;
PMU_CTL |= highdr_switch;
}
/*!
\brief enable low-driver mode in deep-sleep mode
\param[in] none
\param[out] none
\retval none
*/
void pmu_lowdriver_mode_enable(void)
{
PMU_CTL |= PMU_CTL_LDEN;
}
/*!
\brief disable low-driver mode in deep-sleep mode
\param[in] none
\param[out] none
\retval none
*/
void pmu_lowdriver_mode_disable(void)
{
PMU_CTL &= ~PMU_CTL_LDEN;
}
/*!
\brief enable high-driver mode
this bit set by software only when IRC16M or HXTAL used as system clock
\param[in] none
\param[out] none
\retval none
*/
void pmu_highdriver_mode_enable(void)
{
PMU_CTL |= PMU_CTL_HDEN;
}
/*!
\brief disable high-driver mode
\param[in] none
\param[out] none
\retval none
*/
void pmu_highdriver_mode_disable(void)
{
PMU_CTL &= ~PMU_CTL_HDEN;
}
/*!
\brief disable PMU lvd
\param[in] none
\param[out] none
\retval none
*/
void pmu_lvd_disable(void)
{
/* disable LVD */
PMU_CTL &= ~PMU_CTL_LVDEN;
}
/*!
\brief driver mode when use low power LDO
\param[in] mode:
\arg PMU_NORMALDR_LOWPWR: normal driver when use low power LDO
\arg PMU_LOWDR_LOWPWR: low-driver mode enabled when LDEN is 11 and use low power LDO
\param[out] none
\retval none
*/
void pmu_lowpower_driver_config(uint32_t mode)
{
PMU_CTL &= ~PMU_CTL_LDLP;
PMU_CTL |= mode;
}
/*!
\brief driver mode when use normal power LDO
\param[in] mode:
\arg PMU_NORMALDR_NORMALPWR: normal driver when use low power LDO
\arg PMU_LOWDR_NORMALPWR: low-driver mode enabled when LDEN is 11 and use low power LDO
\param[out] none
\retval none
*/
void pmu_normalpower_driver_config(uint32_t mode)
{
PMU_CTL &= ~PMU_CTL_LDNP;
PMU_CTL |= mode;
}
/*!
\brief PMU work at sleep mode
\param[in] sleepmodecmd:
\arg WFI_CMD: use WFI command
\arg WFE_CMD: use WFE command
\param[out] none
\retval none
*/
void pmu_to_sleepmode(uint8_t sleepmodecmd)
{
/* clear sleepdeep bit of Cortex-M4 system control register */
SCB->SCR &= ~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
/* select WFI or WFE command to enter sleep mode */
if(WFI_CMD == sleepmodecmd){
__WFI();
}else{
__WFE();
}
}
/*!
\brief PMU work at deepsleep mode
\param[in] ldo
\arg PMU_LDO_NORMAL: LDO normal work when pmu enter deepsleep mode
\arg PMU_LDO_LOWPOWER: LDO work at low power mode when pmu enter deepsleep mode
\param[in] deepsleepmodecmd:
\arg WFI_CMD: use WFI command
\arg WFE_CMD: use WFE command
\param[out] none
\retval none
*/
void pmu_to_deepsleepmode(uint32_t ldo,uint8_t deepsleepmodecmd)
{
/* clear stbmod and ldolp bits */
PMU_CTL &= ~((uint32_t)(PMU_CTL_STBMOD | PMU_CTL_LDOLP));
/* set ldolp bit according to pmu_ldo */
PMU_CTL |= ldo;
/* set sleepdeep bit of Cortex-M4 system control register */
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
/* select WFI or WFE command to enter deepsleep mode */
if(WFI_CMD == deepsleepmodecmd){
__WFI();
}else{
__SEV();
__WFE();
__WFE();
}
/* reset sleepdeep bit of Cortex-M4 system control register */
SCB->SCR &= ~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
}
/*!
\brief pmu work at standby mode
\param[in] standbymodecmd:
\arg WFI_CMD: use WFI command
\arg WFE_CMD: use WFE command
\param[out] none
\retval none
*/
void pmu_to_standbymode(uint8_t standbymodecmd)
{
/* set sleepdeep bit of Cortex-M4 system control register */
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
/* set stbmod bit */
PMU_CTL |= PMU_CTL_STBMOD;
/* reset wakeup flag */
PMU_CTL |= PMU_CTL_WURST;
/* select WFI or WFE command to enter standby mode */
if(WFI_CMD == standbymodecmd){
__WFI();
}else{
__WFE();
}
}
/*!
\brief clear flag bit
\param[in] flag_reset:
\arg PMU_FLAG_RESET_WAKEUP: reset wakeup flag
\arg PMU_FLAG_RESET_STANDBY: reset standby flag
\param[out] none
\retval none
*/
void pmu_flag_clear(uint32_t flag_reset)
{
switch(flag_reset){
case PMU_FLAG_RESET_WAKEUP:
/* reset wakeup flag */
PMU_CTL |= PMU_CTL_WURST;
break;
case PMU_FLAG_RESET_STANDBY:
/* reset standby flag */
PMU_CTL |= PMU_CTL_STBRST;
break;
default :
break;
}
}
/*!
\brief get flag state
\param[in] flag:
\arg PMU_FLAG_WAKEUP: wakeup flag
\arg PMU_FLAG_STANDBY: standby flag
\arg PMU_FLAG_LVD: lvd flag
\arg PMU_FLAG_LDOVSRF: LDO voltage select ready flag
\arg PMU_FLAG_HDRF: high-driver ready flag
\arg PMU_FLAG_HDSRF: high-driver switch ready flag
\arg PMU_FLAG_LDRF: low-driver mode ready flag
\param[out] none
\retval FlagStatus SET or RESET
*/
FlagStatus pmu_flag_get(uint32_t flag)
{
if(PMU_CS & flag){
return SET;
}else{
return RESET;
}
}
/*!
\brief enable backup domain write
\param[in] none
\param[out] none
\retval none
*/
void pmu_backup_write_enable(void)
{
PMU_CTL |= PMU_CTL_BKPWEN;
}
/*!
\brief disable backup domain write
\param[in] none
\param[out] none
\retval none
*/
void pmu_backup_write_disable(void)
{
PMU_CTL &= ~PMU_CTL_BKPWEN;
}
/*!
\brief enable wakeup pin
\param[in] none
\param[out] none
\retval none
*/
void pmu_wakeup_pin_enable(void)
{
PMU_CS |= PMU_CS_WUPEN;
}
/*!
\brief disable wakeup pin
\param[in] none
\param[out] none
\retval none
*/
void pmu_wakeup_pin_disable(void)
{
PMU_CS &= ~PMU_CS_WUPEN;
}