rt-thread/bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README.md

# The Arduino Compatible of STM32 Blue Pill Board

**English** | [中文](README_zh.md)

## 1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread

STM32 Blue Pill board has support [RTduino](https://github.com/RTduino/RTduino). Users can use Arduino APIs, third party libraries and programming method to program on Blue Pill board.

### 1.1 How to Enable RTduino

Please go to the [RTduino repository](https://github.com/RTduino/RTduino) to see the details.

```Kconfig
Hardware Drivers Config --->
    Onboard Peripheral Drivers --->
        [*] Support Arduino
```

## 2 Arduino Pinout

![blue-pill-f103-pinout](blue-pill-f103-pinout.jpg)

| Arduino Pin | STM32 Pin | 5V Tolerate | 备注                                                                                                          |
| ----------- | --------- | ----------- | ----------------------------------------------------------------------------------------------------------- |
| 0 (D0)      | PB7       | Yes         |                                                                                                             |
| 1 (D1)      | PB6       | Yes         |                                                                                                             |
| 2 (D2)      | PB5       | No          | PWM3-CH2. Token over by RT-Thread PWM device by default                                                     |
| 3 (D3)      | PB4       | Yes         | PWM3-CH1. Token over by RT-Thread PWM device by default                                                     |
| 4 (D4)      | PB3       | Yes         | PWM2-CH2. Token over by RT-Thread PWM device by default                                                     |
| 5 (D5)      | PA15      | Yes         | PWM2-CH1. Token over by RT-Thread PWM device by default                                                     |
| 6 (D6)      | PA8       | Yes         |                                                                                                             |
| 7 (D7)      | PB12      | Yes         |                                                                                                             |
| 8 (D8)      | PC13      | No          |                                                                                                             |
| 9 (D9)      | PC14      | No          |                                                                                                             |
| 10 (D10)    | PC15      | No          |                                                                                                             |
| 11 (D11)    | PA0       | No          |                                                                                                             |
| 12 (D12)    | PB0       | No          | PWM3-CH3. Token over by RT-Thread PWM device by default                                                     |
| 13 (D13)    | PB1       | No          | PWM3-CH4. Token over by RT-Thread PWM device by default                                                     |
| 14 (D14)    | PB9       | Yes         | I2C-SDA. Token over by RT-Thread I2C device by default                                                      |
| 15 (D15)    | PB8       | Yes         | I2C-SCL. Token over by RT-Thread I2C device by default                                                      |
| 16 (D16)    | PA12      | Yes         | USB-DP. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. |
| 17 (D17)    | PA11      | Yes         | USB-DM. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. |
| 18 (D18)    | PA10      | Yes         | UART1-RX. Token over by RT-Thread UART device by default                                                    |
| 19 (D19)    | PA9       | Yes         | UART1-TX. Token over by RT-Thread UART device by default                                                    |
| 20 (D20)    | PA2       | No          | UART2-TX. Token over by RT-Thread UART device by default                                                    |
| 21 (D21)    | PA3       | No          | UART2-RX. Token over by RT-Thread UART device by default                                                    |
| 22 (D22)    | PB10      | Yes         | UART3-TX. Token over by RT-Thread UART device by default                                                    |
| 23 (D23)    | PB11      | Yes         | UART3-RX. Token over by RT-Thread UART device by default                                                    |
| 24 (D24)    | PB15      | Yes         | SPI-MOSI. Token over by RT-Thread SPI device by default                                                     |
| 25 (D25)    | PB14      | Yes         | SPI-MISO. Token over by RT-Thread SPI device by default                                                     |
| 26 (D26)    | PB13      | Yes         | SPI-SCK. Token over by RT-Thread SPI device by default                                                      |
| 27 (A0)     | PA1       | No          | ADC1-CH1. Token over by RT-Thread ADC device by default                                                     |
| 28 (A1)     | PA4       | No          | ADC1-CH4. Token over by RT-Thread ADC device by default                                                     |
| 29 (A2)     | PA5       | No          | ADC1-CH5. Token over by RT-Thread ADC device by default                                                     |
| 30 (A3)     | PA6       | No          | ADC1-CH6. Token over by RT-Thread ADC device by default                                                     |
| 31 (A4)     | PA7       | No          | ADC1-CH7. Token over by RT-Thread ADC device by default                                                     |
| 32 (A5)     | --        |             | ADC of chip internal reference voltage. Token over by RT-Thread ADC device by default                       |
| 33 (A6)     | --        |             | ADC of chip internal temperature. Token over by RT-Thread ADC device by default                             |

> Note:
> 
> 1. If you drive the servo and call the analogWrite function at the same time, you need to select the PWM signal pins generated by different timers. Since the 4 channels of the STM32 timer need to maintain the same frequency, if the PWM generated by the same timer is used to drive the servo and analogWrite respectively , it may cause the servo to fail.
> 2. More information about Arduino pinout, please see [pins_arduino.c](pins_arduino.c) and [pins_arduino.h](pins_arduino.h)

## 3 Communication

### 3.1 I2C Bus

I2C bus is `D14` and `D15` pins. Users can directly include the `#include <Wire.h>`, which is the Arduino official I2C header file, to use the I2C bus.

### 3.2 SPI Bus

SPI bus is `D24`, `D25` and `D26` pins. Users can directly include the `#include <SPI.h>`, which is the Arduino official SPI header file, to use the SPI bus. In addition, chip select pin (SS) also is used, which is `D7` by default.

### 3.3 USB

This board supports USB virtual COM by default. See [example](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial).
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`# The Arduino Compatible of STM32 Blue Pill Board`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`English \| [中文](README_zh.md)`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`## 1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`STM32 Blue Pill board has support [RTduino](https://github.com/RTduino/RTduino). Users can use Arduino APIs, third party libraries and programming method to program on Blue Pill board.`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`### 1.1 How to Enable RTduino`

			`Please go to the [RTduino repository](https://github.com/RTduino/RTduino) to see the details.`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
			```Kconfig
			`Hardware Drivers Config --->`
			`Onboard Peripheral Drivers --->`
			`[*] Support Arduino`
			```

[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`## 2 Arduino Pinout`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[stm32][bluepill] update readme 2022-09-15 21:36:06 +08:00			`![blue-pill-f103-pinout](blue-pill-f103-pinout.jpg)`
[Ardunio]为stm32f103-blue-pill对接RTdunio软件包 (#6231) * 对接RTdunio 2022-08-05 23:51:40 +08:00
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`\| Arduino Pin \| STM32 Pin \| 5V Tolerate \| 备注 \|`
			`\| ----------- \| --------- \| ----------- \| ----------------------------------------------------------------------------------------------------------- \|`
			`\| 0 (D0) \| PB7 \| Yes \| \|`
			`\| 1 (D1) \| PB6 \| Yes \| \|`
			`\| 2 (D2) \| PB5 \| No \| PWM3-CH2. Token over by RT-Thread PWM device by default \|`
			`\| 3 (D3) \| PB4 \| Yes \| PWM3-CH1. Token over by RT-Thread PWM device by default \|`
			`\| 4 (D4) \| PB3 \| Yes \| PWM2-CH2. Token over by RT-Thread PWM device by default \|`
			`\| 5 (D5) \| PA15 \| Yes \| PWM2-CH1. Token over by RT-Thread PWM device by default \|`
			`\| 6 (D6) \| PA8 \| Yes \| \|`
			`\| 7 (D7) \| PB12 \| Yes \| \|`
			`\| 8 (D8) \| PC13 \| No \| \|`
			`\| 9 (D9) \| PC14 \| No \| \|`
			`\| 10 (D10) \| PC15 \| No \| \|`
			`\| 11 (D11) \| PA0 \| No \| \|`
			`\| 12 (D12) \| PB0 \| No \| PWM3-CH3. Token over by RT-Thread PWM device by default \|`
			`\| 13 (D13) \| PB1 \| No \| PWM3-CH4. Token over by RT-Thread PWM device by default \|`
			`\| 14 (D14) \| PB9 \| Yes \| I2C-SDA. Token over by RT-Thread I2C device by default \|`
			`\| 15 (D15) \| PB8 \| Yes \| I2C-SCL. Token over by RT-Thread I2C device by default \|`
[stm32][bluepill] update readme 2022-09-15 21:36:06 +08:00			`\| 16 (D16) \| PA12 \| Yes \| USB-DP. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. \|`
			`\| 17 (D17) \| PA11 \| Yes \| USB-DM. Token over by [TinyUSB](https://github.com/RT-Thread-packages/tinyusb) software package by default. \|`
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`\| 18 (D18) \| PA10 \| Yes \| UART1-RX. Token over by RT-Thread UART device by default \|`
			`\| 19 (D19) \| PA9 \| Yes \| UART1-TX. Token over by RT-Thread UART device by default \|`
			`\| 20 (D20) \| PA2 \| No \| UART2-TX. Token over by RT-Thread UART device by default \|`
			`\| 21 (D21) \| PA3 \| No \| UART2-RX. Token over by RT-Thread UART device by default \|`
			`\| 22 (D22) \| PB10 \| Yes \| UART3-TX. Token over by RT-Thread UART device by default \|`
			`\| 23 (D23) \| PB11 \| Yes \| UART3-RX. Token over by RT-Thread UART device by default \|`
			`\| 24 (D24) \| PB15 \| Yes \| SPI-MOSI. Token over by RT-Thread SPI device by default \|`
			`\| 25 (D25) \| PB14 \| Yes \| SPI-MISO. Token over by RT-Thread SPI device by default \|`
			`\| 26 (D26) \| PB13 \| Yes \| SPI-SCK. Token over by RT-Thread SPI device by default \|`
			`\| 27 (A0) \| PA1 \| No \| ADC1-CH1. Token over by RT-Thread ADC device by default \|`
			`\| 28 (A1) \| PA4 \| No \| ADC1-CH4. Token over by RT-Thread ADC device by default \|`
			`\| 29 (A2) \| PA5 \| No \| ADC1-CH5. Token over by RT-Thread ADC device by default \|`
			`\| 30 (A3) \| PA6 \| No \| ADC1-CH6. Token over by RT-Thread ADC device by default \|`
			`\| 31 (A4) \| PA7 \| No \| ADC1-CH7. Token over by RT-Thread ADC device by default \|`
			`\| 32 (A5) \| -- \| \| ADC of chip internal reference voltage. Token over by RT-Thread ADC device by default \|`
			`\| 33 (A6) \| -- \| \| ADC of chip internal temperature. Token over by RT-Thread ADC device by default \|`

			`> Note:`
[Ardunio] stm32-blue-pill对接RTdunio软件包 (#6241) 按照pinout布局图重新设计Arduino引脚布局和功能 - 目前PB0（D12, PWM）和PA15（D5，PWM）测试不通过参考：https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716 2022-08-08 22:00:03 +08:00			`>`
[rtduino][bluepill] 增加英语readme (#6425) * [rtduino][bluepill] update readme 2022-09-15 09:44:36 +08:00			`> 1. If you drive the servo and call the analogWrite function at the same time, you need to select the PWM signal pins generated by different timers. Since the 4 channels of the STM32 timer need to maintain the same frequency, if the PWM generated by the same timer is used to drive the servo and analogWrite respectively , it may cause the servo to fail.`
			`> 2. More information about Arduino pinout, please see [pins_arduino.c](pins_arduino.c) and [pins_arduino.h](pins_arduino.h)`

			`## 3 Communication`

			`### 3.1 I2C Bus`

			I2C bus is `D14` and `D15` pins. Users can directly include the `#include <Wire.h>`, which is the Arduino official I2C header file, to use the I2C bus.

			`### 3.2 SPI Bus`

			SPI bus is `D24`, `D25` and `D26` pins. Users can directly include the `#include <SPI.h>`, which is the Arduino official SPI header file, to use the SPI bus. In addition, chip select pin (SS) also is used, which is `D7` by default.

			`### 3.3 USB`

			`This board supports USB virtual COM by default. See [example](https://github.com/RTduino/RTduino/tree/master/examples/USBSerial).`