rt-thread/bsp/lpc5410x/Libraries/lpc_chip/chip_5410x/gpio_5410x.h

472 lines
16 KiB
C
Raw Normal View History

2014-12-16 19:54:29 +08:00
/*
* @brief LPC5410X GPIO driver
*
* @note
* Copyright(C) NXP Semiconductors, 2014
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __GPIO_5410X_H_
#define __GPIO_5410X_H_
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup GPIO_5410X CHIP: LPC5410X GPIO driver
* @ingroup CHIP_5410X_DRIVERS
* @{
*/
/**
* @brief GPIO port register block structure
*/
typedef struct { /*!< GPIO_PORT Structure */
__IO uint8_t B[128][32]; /*!< Offset 0x0000: Byte pin registers ports 0 to n; pins PIOn_0 to PIOn_31 */
__IO uint32_t W[32][32]; /*!< Offset 0x1000: Word pin registers port 0 to n */
__IO uint32_t DIR[32]; /*!< Offset 0x2000: Direction registers port n */
__IO uint32_t MASK[32]; /*!< Offset 0x2080: Mask register port n */
__IO uint32_t PIN[32]; /*!< Offset 0x2100: Portpin register port n */
__IO uint32_t MPIN[32]; /*!< Offset 0x2180: Masked port register port n */
__IO uint32_t SET[32]; /*!< Offset 0x2200: Write: Set register for port n Read: output bits for port n */
__O uint32_t CLR[32]; /*!< Offset 0x2280: Clear port n */
__O uint32_t NOT[32]; /*!< Offset 0x2300: Toggle port n */
} LPC_GPIO_T;
/**
* @brief Initialize GPIO block
* @param pGPIO : The base of GPIO peripheral on the chip
* @return Nothing
*/
void Chip_GPIO_Init(LPC_GPIO_T *pGPIO);
/**
* @brief De-Initialize GPIO block
* @param pGPIO : The base of GPIO peripheral on the chip
* @return Nothing
*/
void Chip_GPIO_DeInit(LPC_GPIO_T *pGPIO);
/**
* @brief Set a GPIO port/pin state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set
* @param setting : true for high, false for low
* @return Nothing
* @note It is recommended to use the Chip_GPIO_SetPinState() function instead.
*/
STATIC INLINE void Chip_GPIO_WritePortBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t pin, bool setting)
{
pGPIO->B[port][pin] = setting;
}
/**
* @brief Set a GPIO pin state via the GPIO byte register
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set
* @param setting : true for high, false for low
* @return Nothing
* @note This function replaces Chip_GPIO_WritePortBit()
*/
STATIC INLINE void Chip_GPIO_SetPinState(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin, bool setting)
{
pGPIO->B[port][pin] = setting;
}
/**
* @brief Read a GPIO pin state via the GPIO byte register
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to read
* @param pin : GPIO pin to read
* @return true if the GPIO pin is high, false if low
* @note It is recommended to use the Chip_GPIO_GetPinState() function instead.
*/
STATIC INLINE bool Chip_GPIO_ReadPortBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t pin)
{
return (bool) pGPIO->B[port][pin];
}
/**
* @brief Get a GPIO pin state via the GPIO byte register
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to read
* @param pin : GPIO pin to get state for
* @return true if the GPIO is high, false if low
* @note This function replaces Chip_GPIO_ReadPortBit()
*/
STATIC INLINE bool Chip_GPIO_GetPinState(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
return (bool) pGPIO->B[port][pin];
}
/**
* @brief Set GPIO direction for a single GPIO pin
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set
* @param setting : true for output, false for input
* @return Nothing
* @note It is recommended to use the Chip_GPIO_SetPinDIROutput(),
* Chip_GPIO_SetPinDIRInput() or Chip_GPIO_SetPinDIR() functions instead
* of this function.
*/
void Chip_GPIO_WriteDirBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t pin, bool setting);
/**
* @brief Set GPIO direction for a single GPIO pin to an output
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set direction on as output
* @return Nothing
*/
STATIC INLINE void Chip_GPIO_SetPinDIROutput(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
pGPIO->DIR[port] |= 1UL << pin;
}
/**
* @brief Set GPIO direction for a single GPIO pin to an input
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set direction on as input
* @return Nothing
*/
STATIC INLINE void Chip_GPIO_SetPinDIRInput(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
pGPIO->DIR[port] &= ~(1UL << pin);
}
/**
* @brief Set GPIO direction for a single GPIO pin
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to set
* @param pin : GPIO pin to set direction for
* @param output : true for output, false for input
* @return Nothing
*/
void Chip_GPIO_SetPinDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin, bool output);
/**
* @brief Read a GPIO direction (out or in)
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to read
* @param bit : GPIO bit direction to read
* @return true if the GPIO is an output, false if input
* @note It is recommended to use the Chip_GPIO_GetPinDIR() function instead.
*/
STATIC INLINE bool Chip_GPIO_ReadDirBit(LPC_GPIO_T *pGPIO, uint32_t port, uint8_t bit)
{
return (bool) (((pGPIO->DIR[port]) >> bit) & 1);
}
/**
* @brief Get GPIO direction for a single GPIO pin
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : GPIO port to read (supports port 0 only)
* @param pin : GPIO pin to get direction for
* @return true if the GPIO is an output, false if input
*/
STATIC INLINE bool Chip_GPIO_GetPinDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
return Chip_GPIO_ReadDirBit(pGPIO, port, pin);
}
/**
* @brief Set Direction for a GPIO port
* @param pGPIO : The base of GPIO peripheral on the chip
* @param portNum : port Number
* @param bitValue : GPIO bit to set
* @param out : Direction value, 0 = input, !0 = output
* @return None
* @note Bits set to '0' are not altered. It is recommended to use the
* Chip_GPIO_SetPortDIR() function instead.
*/
void Chip_GPIO_SetDir(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue, uint8_t out);
/**
* @brief Set GPIO direction for a all selected GPIO pins to an output
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number
* @param pinMask : GPIO pin mask to set direction on as output (bits 0..b for pins 0..n)
* @return Nothing
* @note Sets multiple GPIO pins to the output direction, each bit's position that is
* high sets the corresponding pin number for that bit to an output.
*/
STATIC INLINE void Chip_GPIO_SetPortDIROutput(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask)
{
pGPIO->DIR[port] |= pinMask;
}
/**
* @brief Set GPIO direction for a all selected GPIO pins to an input
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number
* @param pinMask : GPIO pin mask to set direction on as input (bits 0..b for pins 0..n)
* @return Nothing
* @note Sets multiple GPIO pins to the input direction, each bit's position that is
* high sets the corresponding pin number for that bit to an input.
*/
STATIC INLINE void Chip_GPIO_SetPortDIRInput(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask)
{
pGPIO->DIR[port] &= ~pinMask;
}
/**
* @brief Set GPIO direction for a all selected GPIO pins to an input or output
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number
* @param pinMask : GPIO pin mask to set direction on (bits 0..b for pins 0..n)
* @param outSet : Direction value, false = set as inputs, true = set as outputs
* @return Nothing
* @note Sets multiple GPIO pins to the input direction, each bit's position that is
* high sets the corresponding pin number for that bit to an input.
*/
void Chip_GPIO_SetPortDIR(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pinMask, bool outSet);
/**
* @brief Get GPIO direction for a all GPIO pins
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number
* @return a bitfield containing the input and output states for each pin
* @note For pins 0..n, a high state in a bit corresponds to an output state for the
* same pin, while a low state corresponds to an input state.
*/
STATIC INLINE uint32_t Chip_GPIO_GetPortDIR(LPC_GPIO_T *pGPIO, uint8_t port)
{
return pGPIO->DIR[port];
}
/**
* @brief Set GPIO port mask value for GPIO masked read and write
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param mask : Mask value for read and write
* @return Nothing
* @note Controls which bits corresponding to PIO0_n are active in the P0MPORT
* register (bit 0 = PIO0_0, bit 1 = PIO0_1, ..., bit 17 = PIO0_17).
*/
STATIC INLINE void Chip_GPIO_SetPortMask(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t mask)
{
pGPIO->MASK[port] = mask;
}
/**
* @brief Get GPIO port mask value used for GPIO masked read and write
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @return Returns value set with the Chip_GPIO_SetPortMask() function.
*/
STATIC INLINE uint32_t Chip_GPIO_GetPortMask(LPC_GPIO_T *pGPIO, uint8_t port)
{
return pGPIO->MASK[port];
}
/**
* @brief Set all GPIO raw pin states (regardless of masking)
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param value : Value to set all GPIO pin states (0..n) to
* @return Nothing
*/
STATIC INLINE void Chip_GPIO_SetPortValue(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t value)
{
pGPIO->PIN[port] = value;
}
/**
* @brief Get all GPIO raw pin states (regardless of masking)
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @return Current (raw) state of all GPIO pins
*/
STATIC INLINE uint32_t Chip_GPIO_GetPortValue(LPC_GPIO_T *pGPIO, uint8_t port)
{
return pGPIO->PIN[port];
}
/**
* @brief Set all GPIO pin states, but mask via the MASKP0 register
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param value : Value to set all GPIO pin states (0..n) to
* @return Nothing
*/
STATIC INLINE void Chip_GPIO_SetMaskedPortValue(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t value)
{
pGPIO->MPIN[port] = value;
}
/**
* @brief Get all GPIO pin statesm but mask via the MASKP0 register
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @return Current (masked) state of all GPIO pins
*/
STATIC INLINE uint32_t Chip_GPIO_GetMaskedPortValue(LPC_GPIO_T *pGPIO, uint8_t port)
{
return pGPIO->MPIN[port];
}
/**
* @brief Set a GPIO port/bit to the high state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param portNum : port number (supports port 0 only)
* @param bitValue : bit(s) in the port to set high
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output. It is recommended to use the
* Chip_GPIO_SetPortOutHigh() function instead.
*/
STATIC INLINE void Chip_GPIO_SetValue(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue)
{
pGPIO->SET[portNum] = bitValue;
}
/**
* @brief Set selected GPIO output pins to the high state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pins : pins (0..n) to set high
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPortOutHigh(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
{
pGPIO->SET[port] = pins;
}
/**
* @brief Set an individual GPIO output pin to the high state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pin : pin number (0..n) to set high
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPinOutHigh(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
pGPIO->SET[port] = (1 << pin);
}
/**
* @brief Set a GPIO port/bit to the low state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param portNum : port number (support port 0 only)
* @param bitValue : bit(s) in the port to set low
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output. It is recommended to use the
* Chip_GPIO_SetPortOutLow() function instead.
*/
STATIC INLINE void Chip_GPIO_ClearValue(LPC_GPIO_T *pGPIO, uint8_t portNum, uint32_t bitValue)
{
pGPIO->CLR[portNum] = bitValue;
}
/**
* @brief Set selected GPIO output pins to the low state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pins : pins (0..n) to set low
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPortOutLow(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
{
pGPIO->CLR[port] = pins;
}
/**
* @brief Set an individual GPIO output pin to the low state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pin : pin number (0..n) to set low
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPinOutLow(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
pGPIO->CLR[port] = (1 << pin);
}
/**
* @brief Toggle selected GPIO output pins to the opposite state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pins : pins (0..n) to toggle
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPortToggle(LPC_GPIO_T *pGPIO, uint8_t port, uint32_t pins)
{
pGPIO->NOT[port] = pins;
}
/**
* @brief Toggle an individual GPIO output pin to the opposite state
* @param pGPIO : The base of GPIO peripheral on the chip
* @param port : port Number (supports port 0 only)
* @param pin : pin number (0..n) to toggle
* @return None
* @note Any bit set as a '0' will not have it's state changed. This only
* applies to ports configured as an output.
*/
STATIC INLINE void Chip_GPIO_SetPinToggle(LPC_GPIO_T *pGPIO, uint8_t port, uint8_t pin)
{
pGPIO->NOT[port] = (1 << pin);
}
/**
* @brief Read current bit states for the selected port
* @param pGPIO : The base of GPIO peripheral on the chip
* @param portNum : port number to read (supports port 0 only)
* @return Current value of GPIO port
* @note The current states of the bits for the port are read, regardless of
* whether the GPIO port bits are input or output. It is recommended to use the
* Chip_GPIO_GetPortValue() function instead.
*/
STATIC INLINE uint32_t Chip_GPIO_ReadValue(LPC_GPIO_T *pGPIO, uint8_t portNum)
{
return pGPIO->PIN[portNum];
}
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __GPIO_5410X_H_ */