rt-thread/bsp/lpc5410x/Libraries/Device/startup/iar_startup_lpc5410x.s

357 lines
14 KiB
ArmAsm
Raw Normal View History

2014-12-16 19:54:29 +08:00
;/*****************************************************************************
; * @file: startup_LPC5410x.s
; * @purpose: CMSIS Cortex-M4/M0+ Core Device Startup File
; * for the NXP LPC5410x Device Series (manually edited)
; * @version: V1.00
; * @date: 19. October 2009
; *----------------------------------------------------------------------------
; *
; * Copyright (C) 2009 ARM Limited. All rights reserved.
; *
; * ARM Limited (ARM) is supplying this software for use with Cortex-Mx
; * processor based microcontrollers. This file can be freely distributed
; * within development tools that are supporting such ARM based processors.
; *
; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
; *
; ******************************************************************************/
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
PUBLIC __vector_table
PUBLIC __vector_table_0x1c
PUBLIC __Vectors
PUBLIC __Vectors_End
PUBLIC __Vectors_Size
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler
DCD NMI_Handler
DCD HardFault_Handler
DCD MemManage_Handler
DCD BusFault_Handler
DCD UsageFault_Handler
__vector_table_0x1c
DCD 0 ; Checksum of the first 7 words
DCD 0
DCD 0 ; Enhanced image marker, set to 0x0 for legacy boot
DCD 0 ; Pointer to enhanced boot block, set to 0x0 for legacy boot
DCD SVC_Handler
DCD DebugMon_Handler
DCD 0
DCD PendSV_Handler
DCD SysTick_Handler
; External Interrupts
DCD WDT_IRQHandler ; Watchdog
DCD BOD_IRQHandler ; Brown Out Detect
DCD Reserved_IRQHandler ; Reserved
DCD DMA_IRQHandler ; DMA Controller
DCD GINT0_IRQHandler ; GPIO Group0 Interrupt
DCD PIN_INT0_IRQHandler ; PIO INT0
DCD PIN_INT1_IRQHandler ; PIO INT1
DCD PIN_INT2_IRQHandler ; PIO INT2
DCD PIN_INT3_IRQHandler ; PIO INT3
DCD UTICK_IRQHandler ; UTICK timer
DCD MRT_IRQHandler ; Multi-Rate Timer
DCD CT32B0_IRQHandler ; CT32B0
DCD CT32B1_IRQHandler ; CT32B1
DCD CT32B2_IRQHandler ; CT32B2
DCD CT32B3_IRQHandler ; CT32B3
DCD CT32B4_IRQHandler ; CT32B4
DCD SCT0_IRQHandler ; Smart Counter Timer
DCD UART0_IRQHandler ; UART0
DCD UART1_IRQHandler ; UART1
DCD UART2_IRQHandler ; UART2
DCD UART3_IRQHandler ; UART3
DCD I2C0_IRQHandler ; I2C0 controller
DCD I2C1_IRQHandler ; I2C1 controller
DCD I2C2_IRQHandler ; I2C2 controller
DCD SPI0_IRQHandler ; SPI0 controller
DCD SPI1_IRQHandler ; SPI1 controller
DCD ADC_SEQA_IRQHandler ; ADC0 A sequence (A/D Converter) interrupt
DCD ADC_SEQB_IRQHandler ; ADC0 B sequence (A/D Converter) interrupt
DCD ADC_THCMP_IRQHandler ; ADC THCMP and OVERRUN ORed
DCD RTC_IRQHandler ; RTC Timer
DCD Reserved_IRQHandler ; Reserved
DCD MAILBOX_IRQHandler ; Mailbox
DCD GINT1_IRQHandler ; GPIO Group1 Interrupt
DCD PIN_INT4_IRQHandler ; PIO INT4
DCD PIN_INT5_IRQHandler ; PIO INT5
DCD PIN_INT6_IRQHandler ; PIO INT6
DCD PIN_INT7_IRQHandler ; PIO INT7
DCD Reserved_IRQHandler ; Reserved
DCD Reserved_IRQHandler ; Reserved
DCD Reserved_IRQHandler ; Reserved
DCD RIT_IRQHandler ; RITimer
DCD Reserved41_IRQHandler ; Reserved
DCD Reserved42_IRQHandler ; Reserved
DCD Reserved43_IRQHandler ; Reserved
DCD Reserved44_IRQHandler ; Reserved
__Vectors_End
__Vectors EQU __vector_table
__Vectors_Size EQU __Vectors_End - __Vectors
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
#if !defined(SLAVEBOOT)
DATA
cpu_id EQU 0xE000ED00
cpu_ctrl EQU 0x40000300
coproc_boot EQU 0x40000304
coproc_stack EQU 0x40000308
rel_vals
DC32 cpu_id, cpu_ctrl, coproc_boot, coproc_stack
DC16 0xFFF, 0xC24
#endif
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER:NOROOT(2)
; Reset Handler - shared for both cores
Reset_Handler
#if !defined(SLAVEBOOT)
; Both the M0+ and M4 core come via this shared startup code,
; but the M0+ and M4 core have different vector tables.
; Determine if the core executing this code is the master or
; the slave and handle each core state individually.
shared_boot_entry
LDR r6, =rel_vals
MOVS r4, #0 ; Flag for slave core (0)
MOVS r5, #1
; Determine which core (M0+ or M4) this code is running on
; r2 = (((*cpu_id) >> 4) & 0xFFF); (M4 core == 0xC24)
get_current_core_id
LDR r0, [r6, #0]
LDR r1, [r0] ; r1 = CPU ID status
LSRS r1, r1, #4 ; Right justify 12 CPU ID bits
LDRH r2, [r6, #16] ; Mask for CPU ID bits
ANDS r2, r1, r2 ; r2 = ARM COrtex CPU ID
LDRH r3, [r6, #18] ; Mask for CPU ID bits
CMP r3, r2 ; Core ID matches M4 identifier
BNE get_master_status
MOV r4, r5 ; Set flag for master core (1)
; Determine if M4 core is the master or slave
; r3 = ((*cpu_ctrl) & 1); (0 == m0+, 1 == M4)
get_master_status
LDR r0, [r6, #4]
LDR r3, [r0] ; r3 = SYSCON co-processor CPU control status
ANDS r3, r3, r5 ; r3 = (Bit 0: 1 = M4 is master, 0 = M4 is slave)
; Select boot based on selected master core and core ID
select_boot
EORS r3, r3, r4 ; r4 = (Bit 0: 0 = master, 1 = slave)
BNE slave_boot
B normal_boot
; Slave boot
slave_boot
LDR r0, [r6, #8]
LDR r2, [r0] ; r1 = SYSCON co-processor boot address
CMP r2, #0 ; Slave boot address = 0 (not set up)?
BEQ cpu_sleep
LDR r0, [r6, #12]
LDR r1, [r0] ; r5 = SYSCON co-processor stack address
MOV sp, r1 ; Update slave CPU stack pointer
; Be sure to update VTOR for the slave MCU to point to the
; slave vector table in boot memory
BX r2 ; Jump to slave boot address
; Slave isn't yet setup for system boot from the master
; so sleep until the master sets it up and then reboots it
cpu_sleep
MOV sp, r5 ; Will force exception if something happens
cpu_sleep_wfi
WFI ; Sleep forever until master reboots
B cpu_sleep_wfi
#endif ; defined(SLAVEBOOT)
; Normal boot for master/slave
normal_boot
LDR r0, =SystemInit
BLX r0
LDR r0, =__iar_program_start
BX r0
; For cores with SystemInit() or __iar_program_start(), the code will sleep the MCU
PUBWEAK SystemInit
SECTION .text:CODE:REORDER:NOROOT(1)
SystemInit
BX LR
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
NMI_Handler
B .
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
HardFault_Handler
B .
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
MemManage_Handler
B .
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
BusFault_Handler
B .
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
UsageFault_Handler
B .
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SVC_Handler
B .
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
DebugMon_Handler
B .
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
PendSV_Handler
B .
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SysTick_Handler
B .
PUBWEAK Reserved_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
Reserved_IRQHandler
B .
PUBWEAK WDT_IRQHandler ; Watchdog
PUBWEAK BOD_IRQHandler ; Brown Out Detect
PUBWEAK DMA_IRQHandler ; DMA Controller
PUBWEAK GINT0_IRQHandler ; GPIO Group0 Interrupt
PUBWEAK PIN_INT0_IRQHandler ; PIO INT0
PUBWEAK PIN_INT1_IRQHandler ; PIO INT1
PUBWEAK PIN_INT2_IRQHandler ; PIO INT2
PUBWEAK PIN_INT3_IRQHandler ; PIO INT3
PUBWEAK UTICK_IRQHandler ; UTICK timer
PUBWEAK MRT_IRQHandler ; Multi-Rate Timer
PUBWEAK CT32B0_IRQHandler ; CT32B0
PUBWEAK CT32B1_IRQHandler ; CT32B1
PUBWEAK CT32B2_IRQHandler ; CT32B2
PUBWEAK CT32B3_IRQHandler ; CT32B3
PUBWEAK CT32B4_IRQHandler ; CT32B4
PUBWEAK UART0_IRQHandler ; UART0
PUBWEAK SCT0_IRQHandler ; Smart Counter Timer
PUBWEAK UART1_IRQHandler ; UART1
PUBWEAK UART2_IRQHandler ; UART2
PUBWEAK UART3_IRQHandler ; UART3
PUBWEAK I2C0_IRQHandler ; I2C0 controller
PUBWEAK I2C1_IRQHandler ; I2C1 controller
PUBWEAK I2C2_IRQHandler ; I2C2 controller
PUBWEAK SPI0_IRQHandler ; SPI0 controller
PUBWEAK SPI1_IRQHandler ; SPI1 controller
PUBWEAK ADC_SEQA_IRQHandler ; ADC0 A sequence (A/D Converter) interrupt
PUBWEAK ADC_SEQB_IRQHandler ; ADC0 B sequence (A/D Converter) interrupt
PUBWEAK ADC_THCMP_IRQHandler ; ADC THCMP and OVERRUN ORed
PUBWEAK RTC_IRQHandler ; RTC Timer
PUBWEAK MAILBOX_IRQHandler ; Mailbox
PUBWEAK GINT1_IRQHandler ; GPIO Group1 Interrupt
PUBWEAK PIN_INT4_IRQHandler ; PIO INT4
PUBWEAK PIN_INT5_IRQHandler ; PIO INT5
PUBWEAK PIN_INT6_IRQHandler ; PIO INT6
PUBWEAK PIN_INT7_IRQHandler ; PIO INT7
PUBWEAK RIT_IRQHandler ; RITimer
PUBWEAK Reserved41_IRQHandler ; Reserved
PUBWEAK Reserved42_IRQHandler ; Reserved
PUBWEAK Reserved43_IRQHandler ; Reserved
PUBWEAK Reserved44_IRQHandler ; Reserved
WDT_IRQHandler ; Watchdog
BOD_IRQHandler ; Brown Out Detect
DMA_IRQHandler ; DMA Controller
GINT0_IRQHandler ; GPIO Group0 Interrupt
PIN_INT0_IRQHandler ; PIO INT0
PIN_INT1_IRQHandler ; PIO INT1
PIN_INT2_IRQHandler ; PIO INT2
PIN_INT3_IRQHandler ; PIO INT3
UTICK_IRQHandler ; UTICK timer
MRT_IRQHandler ; Multi-Rate Timer
CT32B0_IRQHandler ; CT32B0
CT32B1_IRQHandler ; CT32B1
CT32B2_IRQHandler ; CT32B2
CT32B3_IRQHandler ; CT32B3
CT32B4_IRQHandler ; CT32B4
UART0_IRQHandler ; UART0
SCT0_IRQHandler ; Smart Counter Timer
UART1_IRQHandler ; UART1
UART2_IRQHandler ; UART2
UART3_IRQHandler ; UART3
I2C0_IRQHandler ; I2C0 controller
I2C1_IRQHandler ; I2C1 controller
I2C2_IRQHandler ; I2C2 controller
SPI0_IRQHandler ; SPI0 controller
SPI1_IRQHandler ; SPI1 controller
ADC_SEQA_IRQHandler ; ADC0 A sequence (A/D Converter) interrupt
ADC_SEQB_IRQHandler ; ADC0 B sequence (A/D Converter) interrupt
ADC_THCMP_IRQHandler ; ADC THCMP and OVERRUN ORed
RTC_IRQHandler ; RTC Timer
MAILBOX_IRQHandler ; Mailbox
GINT1_IRQHandler ; GPIO Group1 Interrupt
PIN_INT4_IRQHandler ; PIO INT4
PIN_INT5_IRQHandler ; PIO INT5
PIN_INT6_IRQHandler ; PIO INT6
PIN_INT7_IRQHandler ; PIO INT7
RIT_IRQHandler ; RITimer
Reserved41_IRQHandler ; Reserved
Reserved42_IRQHandler ; Reserved
Reserved43_IRQHandler ; Reserved
Reserved44_IRQHandler ; Reserved
Default_Handler:
B .
END