rt-thread/bsp/stm32_radio/codec.c

#include <rthw.h>
#include <rtthread.h>
#include "stm32f10x.h"


/*
SCLK  PA5  SPI1_SCK
SDIN  PA7  SPI1_MOSI
CSB   PC5
*/
#define wm_csb_0   GPIO_ResetBits(GPIOC,GPIO_Pin_5)
#define wm_csb_1   GPIO_SetBits(GPIOC,GPIO_Pin_5)

#define DATA_NODE_MAX 5
/* data node for Tx Mode */
struct wm8753_data_node
{
    rt_uint16_t *data_ptr;
    rt_size_t  data_size;
};

struct wm8753_device
{
    /* inherit from rt_device */
    struct rt_device parent;

    /* pcm data list */
    struct wm8753_data_node data_list[DATA_NODE_MAX];
    rt_uint16_t read_index, put_index;

    /* transmitted offset of current data node */
    rt_size_t offset;
};
struct wm8753_device wm8753;

static void NVIC_Configuration(void)
{
    NVIC_InitTypeDef NVIC_InitStructure;

    /* SPI2 IRQ Channel configuration */
    NVIC_InitStructure.NVIC_IRQChannel = SPI2_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init(&NVIC_InitStructure);

    /* DMA1 IRQ Channel configuration */
    NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel5_IRQn;
    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
    NVIC_Init(&NVIC_InitStructure);
}

static void GPIO_Configuration(void)
{
    GPIO_InitTypeDef GPIO_InitStructure;

    /* Disable the JTAG interface and enable the SWJ interface */
    GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC, ENABLE);

    /* PC5 CODEC CS */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(GPIOC,&GPIO_InitStructure);

    /* Configure SPI2 pins: CK, WS and SD */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_15;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
    GPIO_Init(GPIOB, &GPIO_InitStructure);

#if 0
    /*    MCO    configure */
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(GPIOA,&GPIO_InitStructure);

    RCC_MCOConfig(RCC_MCO_HSE);
#endif
}

#define SPI2_DR_Address  0x4000380C
static void DMA_Configuration(rt_uint32_t addr, rt_size_t size)
{
    DMA_InitTypeDef    DMA_InitStructure;

    /* DMA1 Channel2 configuration ----------------------------------------------*/
    DMA_Cmd(DMA1_Channel5, DISABLE);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)SPI2_DR_Address;
    DMA_InitStructure.DMA_MemoryBaseAddr = (u32)addr;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
    DMA_InitStructure.DMA_BufferSize = size;
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
    DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
    DMA_InitStructure.DMA_Priority = DMA_Priority_Low;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
    DMA_Init(DMA1_Channel5, &DMA_InitStructure);

    /* Enable SPI2 DMA Tx request */
    SPI_I2S_DMACmd(SPI2, SPI_I2S_DMAReq_Tx, ENABLE);

    DMA_ITConfig(DMA1_Channel5, DMA_IT_TC, ENABLE);
    DMA_Cmd(DMA1_Channel5, ENABLE);
}

static void I2S_Configuration(void)
{
    I2S_InitTypeDef I2S_InitStructure;

    /* I2S peripheral configuration */
    I2S_InitStructure.I2S_Standard = I2S_Standard_Phillips;
    I2S_InitStructure.I2S_DataFormat = I2S_DataFormat_16b;
    I2S_InitStructure.I2S_MCLKOutput = I2S_MCLKOutput_Disable;
    I2S_InitStructure.I2S_AudioFreq = I2S_AudioFreq_44k;
    I2S_InitStructure.I2S_CPOL = I2S_CPOL_High;// I2S_CPOL_Low

    /* I2S2 Master Transmitter to I2S3 Slave Receiver communication -----------*/
    /* I2S2 configuration */
    I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx;//I2S_Mode_MasterTx  I2S_Mode_SlaveTx
    I2S_Init(SPI2, &I2S_InitStructure);
}

unsigned char SPI_WriteByte(unsigned char data)
{
    unsigned char Data = 0;

    //Wait until the transmit buffer is empty
    while(SPI_I2S_GetFlagStatus(SPI1,SPI_I2S_FLAG_TXE)==RESET);
    // Send the byte
    SPI_I2S_SendData(SPI1,data);

    //Wait until a data is received
    while(SPI_I2S_GetFlagStatus(SPI1,SPI_I2S_FLAG_RXNE)==RESET);
    // Get the received data
    Data = SPI_I2S_ReceiveData(SPI1);

    // Return the shifted data
    return Data;
}

void wm8753_send(rt_uint16_t s_data)
{
    wm_csb_0;
    SPI_WriteByte( (s_data>>8)&0xFF );
    SPI_WriteByte( s_data&0xFF );
    wm_csb_1;
}

static rt_err_t wm8753_init (rt_device_t dev)
{
    wm8753_send(0<<9 | 0xFF); // reset

    /* POWER manager */
    wm8753_send(1<<9 | (1<<8) | (0<<7) | (0<<6) | (0<<5) | (1<<4) | (1<<3) | (1<<2) | 2    );//<2F><>Դ<EFBFBD><D4B4><EFBFBD><EFBFBD>
    wm8753_send(2<<9 | (1<<8) | (1<<7) | (1<<5) | (1<<4) | (1<<3) | (1<<2) );                // <20>򿪵<EFBFBD>Դ  <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
    wm8753_send(3<<9 | (0<<8) | (0<<7) | (1<<6) | (1<<5) | (1<<3) | (1<<2) | (1<<1) | 1 );   // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>DAC

    /* IIS DAC test */
    wm8753_send(4<<9 | (0<<7) | (2<<3) );//IIS 16BIT
    // 12.288/3/8=512K
    wm8753_send(6<<9  | (0<<5) | (3<<2)| 0);//0: slave 1: master  | (3<<5) | (3<<2)
    wm8753_send(43<<9 | (1<<4) );//INVROUT2

    /* <20><><EFBFBD>ó<EFBFBD>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
    wm8753_send(52<<9 | (1<<8) | (1<<7) | 35 ); // LOUT1 0-57-63
    wm8753_send(53<<9 | (1<<8) | (1<<7) | 35 ); // ROUT1 0-57-63
    wm8753_send(54<<9 | (1<<8) | (1<<7) | 35 ); // LOUT2 0-57-63
    wm8753_send(55<<9 | (1<<8) | (1<<7) | 35 ); // ROUT2 0-57-63

#if 1
    /* LINE IN test */
    wm8753_send(47<<9 | (1<<8) | (1<<4) ); //L LINE_IN VOL (6:4)<29><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: 0-<2D><> 1-12DB 2-9DB 5-0db 7+6DB
    wm8753_send(48<<9 | (1<<8) | (1<<4) ); //R LINE_IN VOL (6:4)<29><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: 0-<2D><> 1-12DB 2-9DB 5-0db 7+6DB
    wm8753_send(50<<9 | (5<<2) | (1<<1) | (1<<0) );//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (4:2)<29><><EFBFBD><EFBFBD> 0-<2D><> 1-12DB 2-9DB 5-0db 7+6DB
    wm8753_send(51<<9 | (5<<2) | (1<<1) | (1<<0) );//<2F><><EFBFBD><EFBFBD><EFBFBD>Ҽ<EFBFBD><D2BC><EFBFBD> (4:2)<29><><EFBFBD><EFBFBD> 0-<2D><> 1-12DB 2-9DB 5-0db 7+6DB

    /* MIC test */
    wm8753_send(44<<9 | (1<<8) | (1<<5) | (1<<4) | (0<<2) | (1<<1) | (1<<0) );//MIC<49><43><EFBFBD><EFBFBD>ѡ<EFBFBD><D1A1>
    wm8753_send(45<<9 | 50);//16-0  63-35
    wm8753_send(46<<9 | 50);//16-0  63-35
#endif

    return RT_EOK;
}

#include <finsh.h>
//0~57~63
void vol(int v)
{
    wm8753_send(52<<9 | (0<<8) | (1<<7) | v ); // LOUT1 0-57-63
    wm8753_send(53<<9 | (1<<8) | (1<<7) | v ); // ROUT1 0-57-63
    wm8753_send(54<<9 | (0<<8) | (1<<7) | v ); // LOUT2 0-57-63
    wm8753_send(55<<9 | (1<<8) | (1<<7) | v ); // ROUT2 0-57-63
}
FINSH_FUNCTION_EXPORT(vol, set volume)

static rt_err_t wm8753_open(rt_device_t dev, rt_uint16_t oflag)
{
    /* enable I2S */
    I2S_Cmd(SPI2, ENABLE);

    return RT_EOK;
}

static rt_err_t wm8753_close(rt_device_t dev)
{
    /* interrupt mode */
    if (dev->flag & RT_DEVICE_FLAG_INT_TX)
    {
        /* Disable the I2S2 */
        I2S_Cmd(SPI2, DISABLE);
    }

    /* remove all data node */

    return RT_EOK;
}

static rt_err_t wm8753_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
    /* rate control */
    return RT_EOK;
}

static rt_size_t wm8753_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
    struct wm8753_device* device;
    struct wm8753_data_node* node;
    rt_uint32_t level;
    rt_uint16_t next_index;

    device = (struct wm8753_device*)dev;
    RT_ASSERT(device != RT_NULL);

    next_index = device->put_index + 1;
    if (next_index >= DATA_NODE_MAX) next_index = 0;

    /* check data_list full */
    if (next_index == device->read_index)
    {
        rt_set_errno(-RT_EFULL);
        return 0;
    }

    level = rt_hw_interrupt_disable();
    node = &device->data_list[device->put_index];
    device->put_index = next_index;

    // rt_kprintf("+\n");
    /* set node attribute */
    node->data_ptr = (rt_uint16_t*)buffer;
    node->data_size = size >> 1; /* size is byte unit, convert to half word unit */

    next_index = device->read_index + 1;
    if (next_index >= DATA_NODE_MAX) next_index = 0;

    /* check data list whether is empty */
    if (next_index == device->put_index)
    {
        if (dev->flag & RT_DEVICE_FLAG_INT_TX)
        {
            device->offset = 0;
            /* enable I2S interrupt */
            SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, ENABLE);
        }
        else if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
        {
            DMA_Configuration((rt_uint32_t)node->data_ptr, node->data_size);
        }
    }
    rt_hw_interrupt_enable(level);

    return size;
}

rt_err_t wm8753_hw_init(void)
{
    rt_device_t dev;

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);

    NVIC_Configuration();
    GPIO_Configuration();
    I2S_Configuration();

    dev = (rt_device_t)&wm8753;
    dev->type			= RT_Device_Class_Unknown;
    dev->rx_indicate 	= RT_NULL;
    dev->tx_complete 	= RT_NULL;
    dev->init 			= wm8753_init;
    dev->open			= wm8753_open;
    dev->close			= wm8753_close;
    dev->read 			= RT_NULL;
    dev->write 			= wm8753_write;
    dev->control 		= wm8753_control;
    dev->private		= RT_NULL;

    /* set read_index and put index to 0 */
    wm8753.read_index	= 0;
    wm8753.put_index 	= 0;

    /* unselect */
    wm_csb_1;

    /* register the device */
    return rt_device_register(&wm8753.parent, "snd",
                              RT_DEVICE_FLAG_WRONLY | RT_DEVICE_FLAG_DMA_TX);
}

void wm8753_isr()
{
    struct wm8753_data_node* node;
    node = &wm8753.data_list[wm8753.read_index]; /* get current data node */

    if (SPI_I2S_GetITStatus(SPI2, SPI_I2S_IT_TXE) == SET)
    {
        SPI_I2S_SendData(SPI2, node->data_ptr[wm8753.offset++]);
    }

    if (wm8753.offset == node->data_size)
    {
        /* move to next node */
        rt_uint16_t next_index;

        next_index = wm8753.read_index + 1;
        if (next_index >= DATA_NODE_MAX) next_index = 0;

        /* notify transmitted complete. */
        if (wm8753.parent.tx_complete != RT_NULL)
        {
            wm8753.parent.tx_complete (&wm8753.parent, wm8753.data_list[wm8753.read_index].data_ptr);
            rt_kprintf("-\n");
        }

        wm8753.offset = 0;
        wm8753.read_index = next_index;
        if (next_index == wm8753.put_index)
        {
            /* no data on the list, disable I2S interrupt */
            SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE);

            rt_kprintf("*\n");
        }
    }
}

void wm8753_dma_isr()
{
    /* switch to next buffer */
    rt_uint16_t next_index;
    void* data_ptr;

    next_index = wm8753.read_index + 1;
    if (next_index >= DATA_NODE_MAX) next_index = 0;

    /* save current data pointer */
    data_ptr = wm8753.data_list[wm8753.read_index].data_ptr;

    wm8753.read_index = next_index;
    if (next_index != wm8753.put_index)
    {
        /* enable next dma request */
        DMA_Configuration((rt_uint32_t)wm8753.data_list[wm8753.read_index].data_ptr,
                          wm8753.data_list[wm8753.read_index].data_size);
    }
    else
    {
        rt_kprintf("*\n");
    }

    /* notify transmitted complete. */
    if (wm8753.parent.tx_complete != RT_NULL)
    {
        wm8753.parent.tx_complete (&wm8753.parent, data_ptr);
        // rt_kprintf("-\n");
    }
}