rt-thread/bsp/lm3s/Libraries/inc/hw_pwm.h

717 lines
40 KiB
C
Raw Normal View History

//*****************************************************************************
//
// hw_pwm.h - Defines and Macros for Pulse Width Modulation (PWM) ports
//
// Copyright (c) 2005-2009 Luminary Micro, Inc. All rights reserved.
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. You may not combine
// this software with "viral" open-source software in order to form a larger
// program. Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 4694 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_PWM_H__
#define __HW_PWM_H__
//*****************************************************************************
//
// The following are defines for the PWM Module Register offsets.
//
//*****************************************************************************
#define PWM_O_CTL 0x00000000 // PWM Master Control register
#define PWM_O_SYNC 0x00000004 // PWM Time Base Sync register
#define PWM_O_ENABLE 0x00000008 // PWM Output Enable register
#define PWM_O_INVERT 0x0000000C // PWM Output Inversion register
#define PWM_O_FAULT 0x00000010 // PWM Output Fault register
#define PWM_O_INTEN 0x00000014 // PWM Interrupt Enable register
#define PWM_O_RIS 0x00000018 // PWM Interrupt Raw Status reg.
#define PWM_O_ISC 0x0000001C // PWM Interrupt Status register
#define PWM_O_STATUS 0x00000020 // PWM Status register
#define PWM_O_FAULTVAL 0x00000024 // PWM Fault Condition Value
#define PWM_O_0_CTL 0x00000040 // PWM0 Control
#define PWM_O_0_INTEN 0x00000044 // PWM0 Interrupt and Trigger
// Enable
#define PWM_O_0_RIS 0x00000048 // PWM0 Raw Interrupt Status
#define PWM_O_0_ISC 0x0000004C // PWM0 Interrupt Status and Clear
#define PWM_O_0_LOAD 0x00000050 // PWM0 Load
#define PWM_O_0_COUNT 0x00000054 // PWM0 Counter
#define PWM_O_0_CMPA 0x00000058 // PWM0 Compare A
#define PWM_O_0_CMPB 0x0000005C // PWM0 Compare B
#define PWM_O_0_GENA 0x00000060 // PWM0 Generator A Control
#define PWM_O_0_GENB 0x00000064 // PWM0 Generator B Control
#define PWM_O_0_DBCTL 0x00000068 // PWM0 Dead-Band Control
#define PWM_O_0_DBRISE 0x0000006C // PWM0 Dead-Band Rising-Edge Delay
#define PWM_O_0_DBFALL 0x00000070 // PWM0 Dead-Band
// Falling-Edge-Delay
#define PWM_O_0_FLTSRC0 0x00000074 // PWM0 Fault Source 0
#define PWM_O_0_FLTSRC1 0x00000078 // PWM0 Fault Source 1
#define PWM_O_0_MINFLTPER 0x0000007C // PWM0 Minimum Fault Period
#define PWM_O_1_CTL 0x00000080 // PWM1 Control
#define PWM_O_1_INTEN 0x00000084 // PWM1 Interrupt Enable
#define PWM_O_1_RIS 0x00000088 // PWM1 Raw Interrupt Status
#define PWM_O_1_ISC 0x0000008C // PWM1 Interrupt Status and Clear
#define PWM_O_1_LOAD 0x00000090 // PWM1 Load
#define PWM_O_1_COUNT 0x00000094 // PWM1 Counter
#define PWM_O_1_CMPA 0x00000098 // PWM1 Compare A
#define PWM_O_1_CMPB 0x0000009C // PWM1 Compare B
#define PWM_O_1_GENA 0x000000A0 // PWM1 Generator A Control
#define PWM_O_1_GENB 0x000000A4 // PWM1 Generator B Control
#define PWM_O_1_DBCTL 0x000000A8 // PWM1 Dead-Band Control
#define PWM_O_1_DBRISE 0x000000AC // PWM1 Dead-Band Rising-Edge Delay
#define PWM_O_1_DBFALL 0x000000B0 // PWM1 Dead-Band
// Falling-Edge-Delay
#define PWM_O_1_FLTSRC0 0x000000B4 // PWM1 Fault Source 0
#define PWM_O_1_FLTSRC1 0x000000B8 // PWM1 Fault Source 1
#define PWM_O_1_MINFLTPER 0x000000BC // PWM1 Minimum Fault Period
#define PWM_O_2_CTL 0x000000C0 // PWM2 Control
#define PWM_O_2_INTEN 0x000000C4 // PWM2 InterruptEnable
#define PWM_O_2_RIS 0x000000C8 // PWM2 Raw Interrupt Status
#define PWM_O_2_ISC 0x000000CC // PWM2 Interrupt Status and Clear
#define PWM_O_2_LOAD 0x000000D0 // PWM2 Load
#define PWM_O_2_COUNT 0x000000D4 // PWM2 Counter
#define PWM_O_2_CMPA 0x000000D8 // PWM2 Compare A
#define PWM_O_2_CMPB 0x000000DC // PWM2 Compare B
#define PWM_O_2_GENA 0x000000E0 // PWM2 Generator A Control
#define PWM_O_2_GENB 0x000000E4 // PWM2 Generator B Control
#define PWM_O_2_DBCTL 0x000000E8 // PWM2 Dead-Band Control
#define PWM_O_2_DBRISE 0x000000EC // PWM2 Dead-Band Rising-Edge Delay
#define PWM_O_2_DBFALL 0x000000F0 // PWM2 Dead-Band
// Falling-Edge-Delay
#define PWM_O_2_FLTSRC0 0x000000F4 // PWM2 Fault Source 0
#define PWM_O_2_FLTSRC1 0x000000F8 // PWM2 Fault Source 1
#define PWM_O_2_MINFLTPER 0x000000FC // PWM2 Minimum Fault Period
#define PWM_O_3_CTL 0x00000100 // PWM3 Control
#define PWM_O_3_INTEN 0x00000104 // PWM3 Interrupt and Trigger
// Enable
#define PWM_O_3_RIS 0x00000108 // PWM3 Raw Interrupt Status
#define PWM_O_3_ISC 0x0000010C // PWM3 Interrupt Status and Clear
#define PWM_O_3_LOAD 0x00000110 // PWM3 Load
#define PWM_O_3_COUNT 0x00000114 // PWM3 Counter
#define PWM_O_3_CMPA 0x00000118 // PWM3 Compare A
#define PWM_O_3_CMPB 0x0000011C // PWM3 Compare B
#define PWM_O_3_GENA 0x00000120 // PWM3 Generator A Control
#define PWM_O_3_GENB 0x00000124 // PWM3 Generator B Control
#define PWM_O_3_DBCTL 0x00000128 // PWM3 Dead-Band Control
#define PWM_O_3_DBRISE 0x0000012C // PWM3 Dead-Band Rising-Edge Delay
#define PWM_O_3_DBFALL 0x00000130 // PWM3 Dead-Band
// Falling-Edge-Delay
#define PWM_O_3_FLTSRC0 0x00000134 // PWM3 Fault Source 0
#define PWM_O_3_FLTSRC1 0x00000138 // PWM3 Fault Source 1
#define PWM_O_3_MINFLTPER 0x0000013C // PWM3 Minimum Fault Period
#define PWM_O_0_FLTSEN 0x00000800 // PWM0 Fault Pin Logic Sense
#define PWM_O_0_FLTSTAT0 0x00000804 // PWM0 Fault Status 0
#define PWM_O_0_FLTSTAT1 0x00000808 // PWM0 Fault Status 1
#define PWM_O_1_FLTSEN 0x00000880 // PWM1 Fault Pin Logic Sense
#define PWM_O_1_FLTSTAT0 0x00000884 // PWM1 Fault Status 0
#define PWM_O_1_FLTSTAT1 0x00000888 // PWM1 Fault Status 1
#define PWM_O_2_FLTSEN 0x00000900 // PWM2 Fault Pin Logic Sense
#define PWM_O_2_FLTSTAT0 0x00000904 // PWM2 Fault Status 0
#define PWM_O_2_FLTSTAT1 0x00000908 // PWM2 Fault Status 1
#define PWM_O_3_FLTSEN 0x00000980 // PWM3 Fault Pin Logic Sense
#define PWM_O_3_FLTSTAT0 0x00000984 // PWM3 Fault Status 0
#define PWM_O_3_FLTSTAT1 0x00000988 // PWM3 Fault Status 1
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Master Control
// register.
//
//*****************************************************************************
#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3.
#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2.
#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1.
#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Time Base Sync
// register.
//
//*****************************************************************************
#define PWM_SYNC_SYNC3 0x00000008 // Reset generator 3 counter
#define PWM_SYNC_SYNC2 0x00000004 // Reset generator 2 counter
#define PWM_SYNC_SYNC1 0x00000002 // Reset generator 1 counter
#define PWM_SYNC_SYNC0 0x00000001 // Reset generator 0 counter
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Output Enable
// register.
//
//*****************************************************************************
#define PWM_ENABLE_PWM7EN 0x00000080 // PWM7 pin enable
#define PWM_ENABLE_PWM6EN 0x00000040 // PWM6 pin enable
#define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 pin enable
#define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 pin enable
#define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 pin enable
#define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 pin enable
#define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 pin enable
#define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 pin enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Inversion register.
//
//*****************************************************************************
#define PWM_INVERT_PWM7INV 0x00000080 // PWM7 pin invert
#define PWM_INVERT_PWM6INV 0x00000040 // PWM6 pin invert
#define PWM_INVERT_PWM5INV 0x00000020 // PWM5 pin invert
#define PWM_INVERT_PWM4INV 0x00000010 // PWM4 pin invert
#define PWM_INVERT_PWM3INV 0x00000008 // PWM3 pin invert
#define PWM_INVERT_PWM2INV 0x00000004 // PWM2 pin invert
#define PWM_INVERT_PWM1INV 0x00000002 // PWM1 pin invert
#define PWM_INVERT_PWM0INV 0x00000001 // PWM0 pin invert
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Fault register.
//
//*****************************************************************************
#define PWM_FAULT_FAULT7 0x00000080 // PWM7 pin fault
#define PWM_FAULT_FAULT6 0x00000040 // PWM6 pin fault
#define PWM_FAULT_FAULT5 0x00000020 // PWM5 pin fault
#define PWM_FAULT_FAULT4 0x00000010 // PWM4 pin fault
#define PWM_FAULT_FAULT3 0x00000008 // PWM3 pin fault
#define PWM_FAULT_FAULT2 0x00000004 // PWM2 pin fault
#define PWM_FAULT_FAULT1 0x00000002 // PWM1 pin fault
#define PWM_FAULT_FAULT0 0x00000001 // PWM0 pin fault
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM Status register.
//
//*****************************************************************************
#define PWM_STATUS_FAULT3 0x00000008 // Fault3 Interrupt Status.
#define PWM_STATUS_FAULT2 0x00000004 // Fault2 Interrupt Status.
#define PWM_STATUS_FAULT1 0x00000002 // Fault1 Interrupt Status.
#define PWM_STATUS_FAULT0 0x00000001 // Fault0 Interrupt Status.
//*****************************************************************************
//
// The following are defines for the PWM Generator standard offsets.
//
//*****************************************************************************
#define PWM_O_X_CTL 0x00000000 // Gen Control Reg
#define PWM_O_X_INTEN 0x00000004 // Gen Int/Trig Enable Reg
#define PWM_O_X_RIS 0x00000008 // Gen Raw Int Status Reg
#define PWM_O_X_ISC 0x0000000C // Gen Int Status Reg
#define PWM_O_X_LOAD 0x00000010 // Gen Load Reg
#define PWM_O_X_COUNT 0x00000014 // Gen Counter Reg
#define PWM_O_X_CMPA 0x00000018 // Gen Compare A Reg
#define PWM_O_X_CMPB 0x0000001C // Gen Compare B Reg
#define PWM_O_X_GENA 0x00000020 // Gen Generator A Ctrl Reg
#define PWM_O_X_GENB 0x00000024 // Gen Generator B Ctrl Reg
#define PWM_O_X_DBCTL 0x00000028 // Gen Dead Band Ctrl Reg
#define PWM_O_X_DBRISE 0x0000002C // Gen DB Rising Edge Delay Reg
#define PWM_O_X_DBFALL 0x00000030 // Gen DB Falling Edge Delay Reg
#define PWM_O_X_FLTSRC0 0x00000034 // Fault pin, comparator condition
#define PWM_O_X_FLTSRC1 0x00000038 // Digital comparator condition
#define PWM_O_X_MINFLTPER 0x0000003C // Fault minimum period extension
#define PWM_GEN_0_OFFSET 0x00000040 // PWM0 base
#define PWM_GEN_1_OFFSET 0x00000080 // PWM1 base
#define PWM_GEN_2_OFFSET 0x000000C0 // PWM2 base
#define PWM_GEN_3_OFFSET 0x00000100 // PWM3 base
//*****************************************************************************
//
// The following are defines for the PWM_X Control Register bit definitions.
//
//*****************************************************************************
#define PWM_X_CTL_LATCH 0x00040000 // Latch Fault Input.
#define PWM_X_CTL_MINFLTPER 0x00020000 // Minimum fault period enabled
#define PWM_X_CTL_FLTSRC 0x00010000 // Fault Condition Source.
#define PWM_X_CTL_DBFALLUPD_M 0x0000C000 // Specifies the update mode for
// the PWMnDBFALL register.
#define PWM_X_CTL_DBFALLUPD_I 0x00000000 // Immediate
#define PWM_X_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
#define PWM_X_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
#define PWM_X_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode.
#define PWM_X_CTL_DBRISEUPD_I 0x00000000 // Immediate
#define PWM_X_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
#define PWM_X_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
#define PWM_X_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode.
#define PWM_X_CTL_DBCTLUPD_I 0x00000000 // Immediate
#define PWM_X_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
#define PWM_X_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
#define PWM_X_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode.
#define PWM_X_CTL_GENBUPD_I 0x00000000 // Immediate
#define PWM_X_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
#define PWM_X_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
#define PWM_X_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode.
#define PWM_X_CTL_GENAUPD_I 0x00000000 // Immediate
#define PWM_X_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
#define PWM_X_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
#define PWM_X_CTL_CMPBUPD 0x00000020 // Update mode for comp B reg
#define PWM_X_CTL_CMPAUPD 0x00000010 // Update mode for comp A reg
#define PWM_X_CTL_LOADUPD 0x00000008 // Update mode for the load reg
#define PWM_X_CTL_DEBUG 0x00000004 // Debug mode
#define PWM_X_CTL_MODE 0x00000002 // Counter mode, down or up/down
#define PWM_X_CTL_ENABLE 0x00000001 // Master enable for gen block
//*****************************************************************************
//
// The following are defines for the PWM Generator extended offsets.
//
//*****************************************************************************
#define PWM_O_X_FLTSEN 0x00000000 // Fault logic sense
#define PWM_O_X_FLTSTAT0 0x00000004 // Pin and comparator status
#define PWM_O_X_FLTSTAT1 0x00000008 // Digital comparator status
#define PWM_EXT_0_OFFSET 0x00000800 // PWM0 extended base
#define PWM_EXT_1_OFFSET 0x00000880 // PWM1 extended base
#define PWM_EXT_2_OFFSET 0x00000900 // PWM2 extended base
#define PWM_EXT_3_OFFSET 0x00000980 // PWM3 extended base
//*****************************************************************************
//
// The following are defines for the PWM_X Interrupt/Trigger Enable Register
// bit definitions.
//
//*****************************************************************************
#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trig if COUNT = CMPB D
#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trig if COUNT = CMPB U
#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trig if COUNT = CMPA D
#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trig if COUNT = CMPA U
#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trig if COUNT = LOAD
#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trig if COUNT = 0
#define PWM_X_INTEN_INTCMPBD 0x00000020 // Int if COUNT = CMPA D
#define PWM_X_INTEN_INTCMPBU 0x00000010 // Int if COUNT = CMPA U
#define PWM_X_INTEN_INTCMPAD 0x00000008 // Int if COUNT = CMPA D
#define PWM_X_INTEN_INTCMPAU 0x00000004 // Int if COUNT = CMPA U
#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Int if COUNT = LOAD
#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Int if COUNT = 0
//*****************************************************************************
//
// The following are defines for the PWM_X Raw Interrupt Status Register bit
// definitions.
//
//*****************************************************************************
#define PWM_X_RIS_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D int
#define PWM_X_RIS_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U int
#define PWM_X_RIS_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D int
#define PWM_X_RIS_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U int
#define PWM_X_RIS_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD int
#define PWM_X_RIS_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 int
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_INTEN register.
//
//*****************************************************************************
#define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3.
#define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2.
#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1.
#define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable.
#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0.
#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable.
#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable.
#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable.
#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_RIS register.
//
//*****************************************************************************
#define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3.
#define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2.
#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1.
#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0.
#define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted.
#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted.
#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted.
#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted.
#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ISC register.
//
//*****************************************************************************
#define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted.
#define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted.
#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted.
#define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted.
#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted.
#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status.
#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status.
#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status.
#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_ISC register.
//
//*****************************************************************************
#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt.
#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt.
#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt.
#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt.
#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt.
#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_LOAD register.
//
//*****************************************************************************
#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value.
#define PWM_X_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_COUNT register.
//
//*****************************************************************************
#define PWM_X_COUNT_M 0x0000FFFF // Counter Value.
#define PWM_X_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_CMPA register.
//
//*****************************************************************************
#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value.
#define PWM_X_CMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_CMPB register.
//
//*****************************************************************************
#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value.
#define PWM_X_CMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_GENA register.
//
//*****************************************************************************
#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down.
#define PWM_X_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert the output signal.
#define PWM_X_GENA_ACTCMPBD_ZERO \
0x00000800 // Set the output signal to 0.
#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Set the output signal to 1.
#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up.
#define PWM_X_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert the output signal.
#define PWM_X_GENA_ACTCMPBU_ZERO \
0x00000200 // Set the output signal to 0.
#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Set the output signal to 1.
#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down.
#define PWM_X_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert the output signal.
#define PWM_X_GENA_ACTCMPAD_ZERO \
0x00000080 // Set the output signal to 0.
#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Set the output signal to 1.
#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up.
#define PWM_X_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert the output signal.
#define PWM_X_GENA_ACTCMPAU_ZERO \
0x00000020 // Set the output signal to 0.
#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Set the output signal to 1.
#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=Load.
#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing.
#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert the output signal.
#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Set the output signal to 0.
#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Set the output signal to 1.
#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0.
#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing.
#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert the output signal.
#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Set the output signal to 0.
#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Set the output signal to 1.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_GENB register.
//
//*****************************************************************************
#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down.
#define PWM_X_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert the output signal.
#define PWM_X_GENB_ACTCMPBD_ZERO \
0x00000800 // Set the output signal to 0.
#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Set the output signal to 1.
#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up.
#define PWM_X_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert the output signal.
#define PWM_X_GENB_ACTCMPBU_ZERO \
0x00000200 // Set the output signal to 0.
#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Set the output signal to 1.
#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down.
#define PWM_X_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert the output signal.
#define PWM_X_GENB_ACTCMPAD_ZERO \
0x00000080 // Set the output signal to 0.
#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Set the output signal to 1.
#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up.
#define PWM_X_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing.
#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert the output signal.
#define PWM_X_GENB_ACTCMPAU_ZERO \
0x00000020 // Set the output signal to 0.
#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Set the output signal to 1.
#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=Load.
#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing.
#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert the output signal.
#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Set the output signal to 0.
#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Set the output signal to 1.
#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0.
#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing.
#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert the output signal.
#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Set the output signal to 0.
#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Set the output signal to 1.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBCTL register.
//
//*****************************************************************************
#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBRISE register.
//
//*****************************************************************************
#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay.
#define PWM_X_DBRISE_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBFALL register.
//
//*****************************************************************************
#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay.
#define PWM_X_DBFALL_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_FAULTVAL register.
//
//*****************************************************************************
#define PWM_FAULTVAL_PWM7 0x00000080 // PWM7 Fault Value.
#define PWM_FAULTVAL_PWM6 0x00000040 // PWM6 Fault Value.
#define PWM_FAULTVAL_PWM5 0x00000020 // PWM5 Fault Value.
#define PWM_FAULTVAL_PWM4 0x00000010 // PWM4 Fault Value.
#define PWM_FAULTVAL_PWM3 0x00000008 // PWM3 Fault Value.
#define PWM_FAULTVAL_PWM2 0x00000004 // PWM2 Fault Value.
#define PWM_FAULTVAL_PWM1 0x00000002 // PWM1 Fault Value.
#define PWM_FAULTVAL_PWM0 0x00000001 // PWM0 Fault Value.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_MINFLTPER
// register.
//
//*****************************************************************************
#define PWM_X_MINFLTPER_M 0x0000FFFF // Minimum Fault Period.
#define PWM_X_MINFLTPER_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_FLTSEN register.
//
//*****************************************************************************
#define PWM_X_FLTSEN_FAULT3 0x00000008 // Fault3 Sense.
#define PWM_X_FLTSEN_FAULT2 0x00000004 // Fault2 Sense.
#define PWM_X_FLTSEN_FAULT1 0x00000002 // Fault1 Sense.
#define PWM_X_FLTSEN_FAULT0 0x00000001 // Fault0 Sense.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_FLTSRC0
// register.
//
//*****************************************************************************
#define PWM_X_FLTSRC0_FAULT3 0x00000008 // Fault3.
#define PWM_X_FLTSRC0_FAULT2 0x00000004 // Fault2.
#define PWM_X_FLTSRC0_FAULT1 0x00000002 // Fault1.
#define PWM_X_FLTSRC0_FAULT0 0x00000001 // Fault0.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_FLTSTAT0
// register.
//
//*****************************************************************************
#define PWM_X_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3.
#define PWM_X_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2.
#define PWM_X_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1.
#define PWM_X_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_FLTSRC1
// register.
//
//*****************************************************************************
#define PWM_X_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7.
#define PWM_X_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6.
#define PWM_X_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5.
#define PWM_X_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4.
#define PWM_X_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3.
#define PWM_X_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2.
#define PWM_X_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1.
#define PWM_X_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0.
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_FLTSTAT1
// register.
//
//*****************************************************************************
#define PWM_X_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger.
#define PWM_X_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger.
#define PWM_X_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger.
#define PWM_X_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger.
#define PWM_X_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger.
#define PWM_X_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger.
#define PWM_X_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger.
#define PWM_X_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger.
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the PWM Master
// Control register.
//
//*****************************************************************************
#define PWM_CTL_GLOBAL_SYNC2 0x00000004 // Global sync generator 2
#define PWM_CTL_GLOBAL_SYNC1 0x00000002 // Global sync generator 1
#define PWM_CTL_GLOBAL_SYNC0 0x00000001 // Global sync generator 0
//*****************************************************************************
//
// The following are deprecated defines for the PWM Interrupt Register bit
// definitions.
//
//*****************************************************************************
#define PWM_INT_INTFAULT 0x00010000 // Fault interrupt pending
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the PWM Status
// register.
//
//*****************************************************************************
#define PWM_STATUS_FAULT 0x00000001 // Fault status
//*****************************************************************************
//
// The following are deprecated defines for the PWM_X Interrupt Status Register
// bit definitions.
//
//*****************************************************************************
#define PWM_X_INT_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D rcvd
#define PWM_X_INT_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U rcvd
#define PWM_X_INT_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D rcvd
#define PWM_X_INT_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U rcvd
#define PWM_X_INT_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD rcvd
#define PWM_X_INT_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 received
//*****************************************************************************
//
// The following are deprecated defines for the PWM_X Generator A/B Control
// Register bit definitions.
//
//*****************************************************************************
#define PWM_X_GEN_Y_ACTCMPBD 0x00000C00 // Act PWM_X_COUNT = PWM_X_CMPB D
#define PWM_X_GEN_Y_ACTCMPBU 0x00000300 // Act PWM_X_COUNT = PWM_X_CMPB U
#define PWM_X_GEN_Y_ACTCMPAD 0x000000C0 // Act PWM_X_COUNT = PWM_X_CMPA D
#define PWM_X_GEN_Y_ACTCMPAU 0x00000030 // Act PWM_X_COUNT = PWM_X_CMPA U
#define PWM_X_GEN_Y_ACTLOAD 0x0000000C // Act PWM_X_COUNT = PWM_X_LOAD
#define PWM_X_GEN_Y_ACTZERO 0x00000003 // Act PWM_X_COUNT = 0
//*****************************************************************************
//
// The following are deprecated defines for the PWM_X Generator A/B Control
// Register action definitions.
//
//*****************************************************************************
#define PWM_GEN_ACT_ONE 0x00000003 // Set the output signal to one
#define PWM_GEN_ACT_ZERO 0x00000002 // Set the output signal to zero
#define PWM_GEN_ACT_INV 0x00000001 // Invert the output signal
#define PWM_GEN_ACT_NONE 0x00000000 // Do nothing
#define PWM_GEN_ACT_B_DN_SHIFT 10 // Shift amount for the B dn action
#define PWM_GEN_ACT_B_UP_SHIFT 8 // Shift amount for the B up action
#define PWM_GEN_ACT_A_DN_SHIFT 6 // Shift amount for the A dn action
#define PWM_GEN_ACT_A_UP_SHIFT 4 // Shift amount for the A up action
#define PWM_GEN_ACT_LOAD_SHIFT 2 // Shift amount for the load action
#define PWM_GEN_ACT_ZERO_SHIFT 0 // Shift amount for the zero action
//*****************************************************************************
//
// The following are deprecated defines for the PWM_X Dead Band Control
// Register bit definitions.
//
//*****************************************************************************
#define PWM_DBCTL_ENABLE 0x00000001 // Enable dead band insertion
//*****************************************************************************
//
// The following are deprecated defines for the PWM Register reset values.
//
//*****************************************************************************
#define PWM_RV_X_DBCTL 0x00000000 // Control the dead band generator
#define PWM_RV_STATUS 0x00000000 // Status
#define PWM_RV_X_ISC 0x00000000 // Interrupt status and clearing
#define PWM_RV_X_RIS 0x00000000 // Raw interrupt status
#define PWM_RV_X_CTL 0x00000000 // Master control of the PWM
// generator block
#define PWM_RV_SYNC 0x00000000 // Counter synch for PWM generators
#define PWM_RV_X_DBFALL 0x00000000 // The dead band falling edge delay
// count
#define PWM_RV_X_INTEN 0x00000000 // Interrupt and trigger enable
#define PWM_RV_X_LOAD 0x00000000 // The load value for the counter
#define PWM_RV_X_GENA 0x00000000 // Controls PWM generator A
#define PWM_RV_CTL 0x00000000 // Master control of the PWM module
#define PWM_RV_FAULT 0x00000000 // Fault handling for the PWM
// output pins
#define PWM_RV_RIS 0x00000000 // Raw interrupt status
#define PWM_RV_X_CMPA 0x00000000 // The comparator A value
#define PWM_RV_INVERT 0x00000000 // Inversion control for PWM output
// pins
#define PWM_RV_X_DBRISE 0x00000000 // The dead band rising edge delay
// count
#define PWM_RV_ENABLE 0x00000000 // Master enable for the PWM output
// pins
#define PWM_RV_X_GENB 0x00000000 // Controls PWM generator B
#define PWM_RV_X_CMPB 0x00000000 // The comparator B value
#define PWM_RV_ISC 0x00000000 // Interrupt status and clearing
#define PWM_RV_INTEN 0x00000000 // Interrupt enable
#define PWM_RV_X_COUNT 0x00000000 // The current counter value
#endif
#endif // __HW_PWM_H__