rt-thread/bsp/imxrt/imxrt1060-nxp-evk/board/Kconfig

menu "Hardware Drivers Config"


config BSP_USING_HYPERFLASH
    bool
    default n

config BSP_USING_4MFLASH
    bool
    default n

config SOC_MIMXRT1062DVL6A
    bool
    select SOC_MIMXRT1062_SERIES
    select BSP_USING_4MFLASH
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_SDRAM
        bool "Enable SDRAM"
        default n

    menuconfig BSP_USING_LCD
        bool "Enable LCD"
        default n
        if BSP_USING_LCD
            config LCD_WIDTH
                int "width"
                default 480

            config LCD_HEIGHT
                int "height"
                default 272

            config LCD_HFP
                int "HFP"
                default 4

            config LCD_VFP
                int "VFP"
                default 4

            config LCD_HBP
                int "HBP"
                default 8

            config LCD_VBP
                int "VBP"
                default 2

            config LCD_HSW
                int "HSW"
                default 40

            config LCD_VSW
                int "VSW"
                default 10

            config LCD_BL_PIN
                int "Backlight ctrl pin"
                default 63

            config LCD_RST_PIN
                int "Reset pin"
                default 2
        endif

    menuconfig BSP_USING_TOUCHPAD
        bool "Enable TOUCHPAD"
        select BSP_USING_PXP
        select BSP_USING_CACHE
        select BSP_USING_I2C
        select BSP_USING_LCD
        default n
        if BSP_USING_TOUCHPAD
            choice
                prompt "Select panel"
                default DEMO_PANEL_RK043FN66HS

                config DEMO_PANEL_RK043FN02H
                    bool "RK043FN02H-CT"

                config DEMO_PANEL_RK043FN66HS
                    bool "RK043FN66HS-CTG"
            endchoice
        endif

    config BSP_USING_LVGL
        bool "Enable LVGL for LCD"
        select BSP_USING_PXP
        select BSP_USING_CACHE
        select BSP_USING_LCD
        select BSP_USING_TOUCHPAD
        select PKG_USING_LVGL
        default n

    if BSP_USING_LVGL
        config BSP_USING_LVGL_DEMO
            bool "Enable LVGL demo"
            select PKG_USING_LV_MUSIC_DEMO
            default y

        config BSP_USING_NXP_GUIGUIDER
            bool "Support NXP GUI Guider"
            select PKG_USING_GUI_GUIDER_DEMO
            default n
    endif
endmenu

menu "On-chip Peripheral Drivers"

    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    menuconfig BSP_USING_I2C
        bool "Enable I2C"
        select RT_USING_I2C
        default y
        if BSP_USING_I2C
            config BSP_USING_I2C1
                bool
                default y
            choice
                prompt "Select I2C1 badurate"
                default HW_I2C1_BADURATE_100kHZ

                config HW_I2C1_BADURATE_100kHZ
                    bool "Badurate 100kHZ"

                config HW_I2C1_BADURATE_400kHZ
                    bool "Badurate 400kHZ"
            endchoice
        endif

    menuconfig BSP_USING_LPUART
        bool "Enable UART"
        select RT_USING_SERIAL
        default y
        if BSP_USING_LPUART
            config BSP_USING_LPUART1
                bool "Enable LPUART1"
                default y
            config BSP_USING_LPUART2
                bool "Enable LPUART2"
                default n
            config BSP_USING_LPUART3
                bool "Enable LPUART3"
                default n
            config BSP_USING_LPUART4
                bool "Enable LPUART4"
                default n
            config BSP_USING_LPUART5
                bool "Enable LPUART5"
                default n
            config BSP_USING_LPUART6
                bool "Enable LPUART6"
                default n
            config BSP_USING_LPUART7
                bool "Enable LPUART7"
                default n
            config BSP_USING_LPUART8
                bool "Enable LPUART8"
                default n
        endif

    config BSP_USING_PXP
        bool "Enable PXP"
        default n

    config BSP_USING_CACHE
        bool "Enable CACHE"
        default n

endmenu

menu "Board extended module Drivers"

endmenu

endmenu
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`menu "Hardware Drivers Config"`


			`config BSP_USING_HYPERFLASH`
			`bool`
			`default n`

			`config BSP_USING_4MFLASH`
			`bool`
			`default n`

			`config SOC_MIMXRT1062DVL6A`
			`bool`
			`select SOC_MIMXRT1062_SERIES`
			`select BSP_USING_4MFLASH`
			`select RT_USING_COMPONENTS_INIT`
			`select RT_USING_USER_MAIN`
			`default y`

[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`menu "Onboard Peripheral Drivers"`
增加双网口配置选项，增加phy8211F 驱动 (#6278) * Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <920369182@qq.com> 2022-08-15 11:21:27 +08:00
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`config BSP_USING_SDRAM`
			`bool "Enable SDRAM"`
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`default n`

			`menuconfig BSP_USING_LCD`
			`bool "Enable LCD"`
			`default n`
			`if BSP_USING_LCD`
			`config LCD_WIDTH`
			`int "width"`
			`default 480`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_HEIGHT`
			`int "height"`
			`default 272`

			`config LCD_HFP`
			`int "HFP"`
			`default 4`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_VFP`
			`int "VFP"`
			`default 4`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_HBP`
			`int "HBP"`
			`default 8`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_VBP`
			`int "VBP"`
			`default 2`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_HSW`
			`int "HSW"`
			`default 40`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_VSW`
			`int "VSW"`
			`default 10`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_BL_PIN`
			`int "Backlight ctrl pin"`
			`default 63`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config LCD_RST_PIN`
			`int "Reset pin"`
			`default 2`
			`endif`

[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com> 2022-05-16 22:27:06 +08:00			`menuconfig BSP_USING_TOUCHPAD`
			`bool "Enable TOUCHPAD"`
			`select BSP_USING_PXP`
			`select BSP_USING_CACHE`
			`select BSP_USING_I2C`
			`select BSP_USING_LCD`
			`default n`
			`if BSP_USING_TOUCHPAD`
			`choice`
			`prompt "Select panel"`
[imxrt1060] fix a tiny problme this is report in slack group: - I had to do a small fix in board/linker_scripts/link.lds file. line 81, should be: ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data); (add a space between ivt_begin and "=“). - For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick. 2022-08-14 08:32:41 +08:00			`default DEMO_PANEL_RK043FN66HS`
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com> 2022-05-16 22:27:06 +08:00
			`config DEMO_PANEL_RK043FN02H`
			`bool "RK043FN02H-CT"`

			`config DEMO_PANEL_RK043FN66HS`
			`bool "RK043FN66HS-CTG"`
			`endchoice`
			`endif`

添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`config BSP_USING_LVGL`
			`bool "Enable LVGL for LCD"`
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`select BSP_USING_PXP`
			`select BSP_USING_CACHE`
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`select BSP_USING_LCD`
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com> 2022-05-16 22:27:06 +08:00			`select BSP_USING_TOUCHPAD`
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`select PKG_USING_LVGL`
			`default n`

prepare to support squareline studio 2022-05-06 02:21:21 +08:00			`if BSP_USING_LVGL`
			`config BSP_USING_LVGL_DEMO`
			`bool "Enable LVGL demo"`
			`select PKG_USING_LV_MUSIC_DEMO`
[lvgl] remove suareline studio specific support for imxrt1060 (#6261) * [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes * [lvgl] remove specific suppport for imxrt1060 https://github.com/lvgl/lvgl/pull/3566 2022-08-14 10:02:41 +08:00			`default y`
[imxrt1060]support NXP GUiGuider 2022-05-13 13:01:09 +08:00
			`config BSP_USING_NXP_GUIGUIDER`
			`bool "Support NXP GUI Guider"`
			`select PKG_USING_GUI_GUIDER_DEMO`
			`default n`
prepare to support squareline studio 2022-05-06 02:21:21 +08:00			`endif`
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`endmenu`

[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`menu "On-chip Peripheral Drivers"`

			`config BSP_USING_GPIO`
			`bool "Enable GPIO"`
			`select RT_USING_PIN`
			`default y`

[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com> 2022-05-16 22:27:06 +08:00			`menuconfig BSP_USING_I2C`
			`bool "Enable I2C"`
			`select RT_USING_I2C`
			`default y`
			`if BSP_USING_I2C`
			`config BSP_USING_I2C1`
			`bool`
			`default y`
			`choice`
			`prompt "Select I2C1 badurate"`
			`default HW_I2C1_BADURATE_100kHZ`

			`config HW_I2C1_BADURATE_100kHZ`
			`bool "Badurate 100kHZ"`

			`config HW_I2C1_BADURATE_400kHZ`
			`bool "Badurate 400kHZ"`
			`endchoice`
			`endif`

[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`menuconfig BSP_USING_LPUART`
			`bool "Enable UART"`
			`select RT_USING_SERIAL`
			`default y`
			`if BSP_USING_LPUART`
			`config BSP_USING_LPUART1`
			`bool "Enable LPUART1"`
			`default y`
			`config BSP_USING_LPUART2`
			`bool "Enable LPUART2"`
			`default n`
			`config BSP_USING_LPUART3`
			`bool "Enable LPUART3"`
			`default n`
			`config BSP_USING_LPUART4`
			`bool "Enable LPUART4"`
			`default n`
			`config BSP_USING_LPUART5`
			`bool "Enable LPUART5"`
			`default n`
			`config BSP_USING_LPUART6`
			`bool "Enable LPUART6"`
			`default n`
			`config BSP_USING_LPUART7`
			`bool "Enable LPUART7"`
			`default n`
			`config BSP_USING_LPUART8`
			`bool "Enable LPUART8"`
			`default n`
			`endif`

			`config BSP_USING_PXP`
			`bool "Enable PXP"`
			`default n`

			`config BSP_USING_CACHE`
			`bool "Enable CACHE"`
			`default n`
增加双网口配置选项，增加phy8211F 驱动 (#6278) * Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <920369182@qq.com> 2022-08-15 11:21:27 +08:00
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig 2022-05-04 14:39:06 +08:00			`endmenu`

添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting 2022-03-11 12:13:56 +08:00			`menu "Board extended module Drivers"`

			`endmenu`

			`endmenu`