256 lines
9.7 KiB
C
256 lines
9.7 KiB
C
|
/*
|
||
|
** ###################################################################
|
||
|
** Processors: MIMXRT1052CVJ5B
|
||
|
** MIMXRT1052CVL5B
|
||
|
** MIMXRT1052DVJ6B
|
||
|
** MIMXRT1052DVL6B
|
||
|
**
|
||
|
** Compilers: Keil ARM C/C++ Compiler
|
||
|
** Freescale C/C++ for Embedded ARM
|
||
|
** GNU C Compiler
|
||
|
** IAR ANSI C/C++ Compiler for ARM
|
||
|
** MCUXpresso Compiler
|
||
|
**
|
||
|
** Reference manual: IMXRT1050RM Rev.1, 03/2018
|
||
|
** Version: rev. 0.1, 2017-01-10
|
||
|
** Build: b180509
|
||
|
**
|
||
|
** Abstract:
|
||
|
** Provides a system configuration function and a global variable that
|
||
|
** contains the system frequency. It configures the device and initializes
|
||
|
** the oscillator (PLL) that is part of the microcontroller device.
|
||
|
**
|
||
|
** The Clear BSD License
|
||
|
** Copyright 2016 Freescale Semiconductor, Inc.
|
||
|
** Copyright 2016-2018 NXP
|
||
|
** All rights reserved.
|
||
|
**
|
||
|
** Redistribution and use in source and binary forms, with or without
|
||
|
** modification, are permitted (subject to the limitations in the
|
||
|
** disclaimer below) provided that the following conditions are met:
|
||
|
**
|
||
|
** * Redistributions of source code must retain the above copyright
|
||
|
** notice, this list of conditions and the following disclaimer.
|
||
|
**
|
||
|
** * Redistributions in binary form must reproduce the above copyright
|
||
|
** notice, this list of conditions and the following disclaimer in the
|
||
|
** documentation and/or other materials provided with the distribution.
|
||
|
**
|
||
|
** * Neither the name of the copyright holder nor the names of its
|
||
|
** contributors may be used to endorse or promote products derived from
|
||
|
** this software without specific prior written permission.
|
||
|
**
|
||
|
** NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
|
||
|
** GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
|
||
|
** HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
|
||
|
** WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
|
** MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||
|
** LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||
|
** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||
|
** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||
|
** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||
|
** IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
**
|
||
|
** http: www.nxp.com
|
||
|
** mail: support@nxp.com
|
||
|
**
|
||
|
** Revisions:
|
||
|
** - rev. 0.1 (2017-01-10)
|
||
|
** Initial version.
|
||
|
**
|
||
|
** ###################################################################
|
||
|
*/
|
||
|
|
||
|
/*!
|
||
|
* @file MIMXRT1052
|
||
|
* @version 0.1
|
||
|
* @date 2017-01-10
|
||
|
* @brief Device specific configuration file for MIMXRT1052 (implementation file)
|
||
|
*
|
||
|
* Provides a system configuration function and a global variable that contains
|
||
|
* the system frequency. It configures the device and initializes the oscillator
|
||
|
* (PLL) that is part of the microcontroller device.
|
||
|
*/
|
||
|
|
||
|
#include <stdint.h>
|
||
|
#include "fsl_device_registers.h"
|
||
|
|
||
|
|
||
|
|
||
|
/* ----------------------------------------------------------------------------
|
||
|
-- Core clock
|
||
|
---------------------------------------------------------------------------- */
|
||
|
|
||
|
uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;
|
||
|
|
||
|
/* ----------------------------------------------------------------------------
|
||
|
-- SystemInit()
|
||
|
---------------------------------------------------------------------------- */
|
||
|
|
||
|
void SystemInit (void) {
|
||
|
#if ((__FPU_PRESENT == 1) && (__FPU_USED == 1))
|
||
|
SCB->CPACR |= ((3UL << 10*2) | (3UL << 11*2)); /* set CP10, CP11 Full Access */
|
||
|
#endif /* ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) */
|
||
|
|
||
|
#if defined(__MCUXPRESSO)
|
||
|
extern uint32_t g_pfnVectors[]; // Vector table defined in startup code
|
||
|
SCB->VTOR = (uint32_t)g_pfnVectors;
|
||
|
#endif
|
||
|
|
||
|
/* Disable Watchdog Power Down Counter */
|
||
|
WDOG1->WMCR &= ~WDOG_WMCR_PDE_MASK;
|
||
|
WDOG2->WMCR &= ~WDOG_WMCR_PDE_MASK;
|
||
|
|
||
|
/* Watchdog disable */
|
||
|
|
||
|
#if (DISABLE_WDOG)
|
||
|
if (WDOG1->WCR & WDOG_WCR_WDE_MASK)
|
||
|
{
|
||
|
WDOG1->WCR &= ~WDOG_WCR_WDE_MASK;
|
||
|
}
|
||
|
if (WDOG2->WCR & WDOG_WCR_WDE_MASK)
|
||
|
{
|
||
|
WDOG2->WCR &= ~WDOG_WCR_WDE_MASK;
|
||
|
}
|
||
|
RTWDOG->CNT = 0xD928C520U; /* 0xD928C520U is the update key */
|
||
|
RTWDOG->TOVAL = 0xFFFF;
|
||
|
RTWDOG->CS = (uint32_t) ((RTWDOG->CS) & ~RTWDOG_CS_EN_MASK) | RTWDOG_CS_UPDATE_MASK;
|
||
|
#endif /* (DISABLE_WDOG) */
|
||
|
|
||
|
/* Disable Systick which might be enabled by bootrom */
|
||
|
if (SysTick->CTRL & SysTick_CTRL_ENABLE_Msk)
|
||
|
{
|
||
|
SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
|
||
|
}
|
||
|
|
||
|
/* Enable instruction and data caches */
|
||
|
#if defined(__ICACHE_PRESENT) && __ICACHE_PRESENT
|
||
|
if (SCB_CCR_IC_Msk != (SCB_CCR_IC_Msk & SCB->CCR)) {
|
||
|
SCB_EnableICache();
|
||
|
}
|
||
|
#endif
|
||
|
#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT
|
||
|
if (SCB_CCR_DC_Msk != (SCB_CCR_DC_Msk & SCB->CCR)) {
|
||
|
SCB_EnableDCache();
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
SystemInitHook();
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------------
|
||
|
-- SystemCoreClockUpdate()
|
||
|
---------------------------------------------------------------------------- */
|
||
|
|
||
|
void SystemCoreClockUpdate (void) {
|
||
|
|
||
|
uint32_t freq;
|
||
|
uint32_t PLL1MainClock;
|
||
|
uint32_t PLL2MainClock;
|
||
|
|
||
|
/* Periph_clk2_clk ---> Periph_clk */
|
||
|
if (CCM->CBCDR & CCM_CBCDR_PERIPH_CLK_SEL_MASK)
|
||
|
{
|
||
|
switch (CCM->CBCMR & CCM_CBCMR_PERIPH_CLK2_SEL_MASK)
|
||
|
{
|
||
|
/* Pll3_sw_clk ---> Periph_clk2_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PERIPH_CLK2_SEL(0U):
|
||
|
if(CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_BYPASS_MASK)
|
||
|
{
|
||
|
freq = (((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_BYPASS_CLK_SRC_MASK) >> CCM_ANALOG_PLL_USB1_BYPASS_CLK_SRC_SHIFT) == 0U) ?
|
||
|
CPU_XTAL_CLK_HZ : CPU_CLK1_HZ;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
freq = (CPU_XTAL_CLK_HZ * ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_DIV_SELECT_MASK) ? 22U : 20U));
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
/* Osc_clk ---> Periph_clk2_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PERIPH_CLK2_SEL(1U):
|
||
|
freq = CPU_XTAL_CLK_HZ;
|
||
|
break;
|
||
|
|
||
|
case CCM_CBCMR_PERIPH_CLK2_SEL(2U):
|
||
|
freq = (((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC_MASK) >> CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC_SHIFT) == 0U) ?
|
||
|
CPU_XTAL_CLK_HZ : CPU_CLK1_HZ;
|
||
|
|
||
|
case CCM_CBCMR_PERIPH_CLK2_SEL(3U):
|
||
|
default:
|
||
|
freq = 0U;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
freq /= (((CCM->CBCDR & CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >> CCM_CBCDR_PERIPH_CLK2_PODF_SHIFT) + 1U);
|
||
|
}
|
||
|
/* Pre_Periph_clk ---> Periph_clk */
|
||
|
else
|
||
|
{
|
||
|
/* check if pll is bypassed */
|
||
|
if(CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_BYPASS_MASK)
|
||
|
{
|
||
|
PLL1MainClock = (((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_MASK) >> CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_SHIFT) == 0U) ?
|
||
|
CPU_XTAL_CLK_HZ : CPU_CLK1_HZ;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
PLL1MainClock = ((CPU_XTAL_CLK_HZ * ((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >>
|
||
|
CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT)) >> 1U);
|
||
|
}
|
||
|
|
||
|
/* check if pll is bypassed */
|
||
|
if(CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_BYPASS_MASK)
|
||
|
{
|
||
|
PLL2MainClock = (((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC_MASK) >> CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC_SHIFT) == 0U) ?
|
||
|
CPU_XTAL_CLK_HZ : CPU_CLK1_HZ;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
PLL2MainClock = (CPU_XTAL_CLK_HZ * ((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_DIV_SELECT_MASK) ? 22U : 20U));
|
||
|
}
|
||
|
PLL2MainClock += ((uint64_t)CPU_XTAL_CLK_HZ * ((uint64_t)(CCM_ANALOG->PLL_SYS_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_SYS_DENOM));
|
||
|
|
||
|
|
||
|
switch (CCM->CBCMR & CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
|
||
|
{
|
||
|
/* PLL2 ---> Pre_Periph_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(0U):
|
||
|
freq = PLL2MainClock;
|
||
|
break;
|
||
|
|
||
|
/* PLL2 PFD2 ---> Pre_Periph_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(1U):
|
||
|
freq = PLL2MainClock / ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD2_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD2_FRAC_SHIFT) * 18U;
|
||
|
break;
|
||
|
|
||
|
/* PLL2 PFD0 ---> Pre_Periph_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(2U):
|
||
|
freq = PLL2MainClock / ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD0_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD0_FRAC_SHIFT) * 18U;
|
||
|
break;
|
||
|
|
||
|
/* PLL1 divided(/2) ---> Pre_Periph_clk ---> Periph_clk */
|
||
|
case CCM_CBCMR_PRE_PERIPH_CLK_SEL(3U):
|
||
|
freq = PLL1MainClock / (((CCM->CACRR & CCM_CACRR_ARM_PODF_MASK) >> CCM_CACRR_ARM_PODF_SHIFT) + 1U);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
freq = 0U;
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
SystemCoreClock = (freq / (((CCM->CBCDR & CCM_CBCDR_AHB_PODF_MASK) >> CCM_CBCDR_AHB_PODF_SHIFT) + 1U));
|
||
|
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------------
|
||
|
-- SystemInitHook()
|
||
|
---------------------------------------------------------------------------- */
|
||
|
|
||
|
__attribute__ ((weak)) void SystemInitHook (void) {
|
||
|
/* Void implementation of the weak function. */
|
||
|
}
|