rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_rtc.h

415 lines
13 KiB
C
Raw Normal View History

2017-07-01 11:33:12 +08:00
/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_RTC_H_
#define _FSL_RTC_H_
#include "fsl_common.h"
/*!
* @addtogroup rtc
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
#define FSL_RTC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0 */
/*@}*/
/*! @brief List of RTC interrupts */
typedef enum _rtc_interrupt_enable
{
kRTC_TimeInvalidInterruptEnable = RTC_IER_TIIE_MASK, /*!< Time invalid interrupt.*/
kRTC_TimeOverflowInterruptEnable = RTC_IER_TOIE_MASK, /*!< Time overflow interrupt.*/
kRTC_AlarmInterruptEnable = RTC_IER_TAIE_MASK, /*!< Alarm interrupt.*/
kRTC_SecondsInterruptEnable = RTC_IER_TSIE_MASK /*!< Seconds interrupt.*/
} rtc_interrupt_enable_t;
/*! @brief List of RTC flags */
typedef enum _rtc_status_flags
{
kRTC_TimeInvalidFlag = RTC_SR_TIF_MASK, /*!< Time invalid flag */
kRTC_TimeOverflowFlag = RTC_SR_TOF_MASK, /*!< Time overflow flag */
kRTC_AlarmFlag = RTC_SR_TAF_MASK /*!< Alarm flag*/
} rtc_status_flags_t;
#if (defined(FSL_FEATURE_RTC_HAS_OSC_SCXP) && FSL_FEATURE_RTC_HAS_OSC_SCXP)
/*! @brief List of RTC Oscillator capacitor load settings */
typedef enum _rtc_osc_cap_load
{
kRTC_Capacitor_2p = RTC_CR_SC2P_MASK, /*!< 2 pF capacitor load */
kRTC_Capacitor_4p = RTC_CR_SC4P_MASK, /*!< 4 pF capacitor load */
kRTC_Capacitor_8p = RTC_CR_SC8P_MASK, /*!< 8 pF capacitor load */
kRTC_Capacitor_16p = RTC_CR_SC16P_MASK /*!< 16 pF capacitor load */
} rtc_osc_cap_load_t;
#endif /* FSL_FEATURE_SCG_HAS_OSC_SCXP */
/*! @brief Structure is used to hold the date and time */
typedef struct _rtc_datetime
{
uint16_t year; /*!< Range from 1970 to 2099.*/
uint8_t month; /*!< Range from 1 to 12.*/
uint8_t day; /*!< Range from 1 to 31 (depending on month).*/
uint8_t hour; /*!< Range from 0 to 23.*/
uint8_t minute; /*!< Range from 0 to 59.*/
uint8_t second; /*!< Range from 0 to 59.*/
} rtc_datetime_t;
/*!
* @brief RTC config structure
*
* This structure holds the configuration settings for the RTC peripheral. To initialize this
* structure to reasonable defaults, call the RTC_GetDefaultConfig() function and pass a
* pointer to your config structure instance.
*
* The config struct can be made const so it resides in flash
*/
typedef struct _rtc_config
{
bool wakeupSelect; /*!< true: Wakeup pin outputs the 32 KHz clock;
false:Wakeup pin used to wakeup the chip */
bool updateMode; /*!< true: Registers can be written even when locked under certain
conditions, false: No writes allowed when registers are locked */
bool supervisorAccess; /*!< true: Non-supervisor accesses are allowed;
false: Non-supervisor accesses are not supported */
uint32_t compensationInterval; /*!< Compensation interval that is written to the CIR field in RTC TCR Register */
uint32_t compensationTime; /*!< Compensation time that is written to the TCR field in RTC TCR Register */
} rtc_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Ungates the RTC clock and configures the peripheral for basic operation.
*
* This function issues a software reset if the timer invalid flag is set.
*
* @note This API should be called at the beginning of the application using the RTC driver.
*
* @param base RTC peripheral base address
* @param config Pointer to the user's RTC configuration structure.
*/
void RTC_Init(RTC_Type *base, const rtc_config_t *config);
/*!
* @brief Stops the timer and gate the RTC clock.
*
* @param base RTC peripheral base address
*/
static inline void RTC_Deinit(RTC_Type *base)
{
/* Stop the RTC timer */
base->SR &= ~RTC_SR_TCE_MASK;
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* Gate the module clock */
CLOCK_DisableClock(kCLOCK_Rtc0);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
}
/*!
* @brief Fills in the RTC config struct with the default settings.
*
* The default values are as follows.
* @code
* config->wakeupSelect = false;
* config->updateMode = false;
* config->supervisorAccess = false;
* config->compensationInterval = 0;
* config->compensationTime = 0;
* @endcode
* @param config Pointer to the user's RTC configuration structure.
*/
void RTC_GetDefaultConfig(rtc_config_t *config);
/*! @}*/
/*!
* @name Current Time & Alarm
* @{
*/
/*!
* @brief Sets the RTC date and time according to the given time structure.
*
* The RTC counter must be stopped prior to calling this function because writes to the RTC
* seconds register fail if the RTC counter is running.
*
* @param base RTC peripheral base address
* @param datetime Pointer to the structure where the date and time details are stored.
*
* @return kStatus_Success: Success in setting the time and starting the RTC
* kStatus_InvalidArgument: Error because the datetime format is incorrect
*/
status_t RTC_SetDatetime(RTC_Type *base, const rtc_datetime_t *datetime);
/*!
* @brief Gets the RTC time and stores it in the given time structure.
*
* @param base RTC peripheral base address
* @param datetime Pointer to the structure where the date and time details are stored.
*/
void RTC_GetDatetime(RTC_Type *base, rtc_datetime_t *datetime);
/*!
* @brief Sets the RTC alarm time.
*
* The function checks whether the specified alarm time is greater than the present
* time. If not, the function does not set the alarm and returns an error.
*
* @param base RTC peripheral base address
* @param alarmTime Pointer to the structure where the alarm time is stored.
*
* @return kStatus_Success: success in setting the RTC alarm
* kStatus_InvalidArgument: Error because the alarm datetime format is incorrect
* kStatus_Fail: Error because the alarm time has already passed
*/
status_t RTC_SetAlarm(RTC_Type *base, const rtc_datetime_t *alarmTime);
/*!
* @brief Returns the RTC alarm time.
*
* @param base RTC peripheral base address
* @param datetime Pointer to the structure where the alarm date and time details are stored.
*/
void RTC_GetAlarm(RTC_Type *base, rtc_datetime_t *datetime);
/*! @}*/
/*!
* @name Interrupt Interface
* @{
*/
/*!
* @brief Enables the selected RTC interrupts.
*
* @param base RTC peripheral base address
* @param mask The interrupts to enable. This is a logical OR of members of the
* enumeration ::rtc_interrupt_enable_t
*/
static inline void RTC_EnableInterrupts(RTC_Type *base, uint32_t mask)
{
base->IER |= mask;
}
/*!
* @brief Disables the selected RTC interrupts.
*
* @param base RTC peripheral base address
* @param mask The interrupts to enable. This is a logical OR of members of the
* enumeration ::rtc_interrupt_enable_t
*/
static inline void RTC_DisableInterrupts(RTC_Type *base, uint32_t mask)
{
base->IER &= ~mask;
}
/*!
* @brief Gets the enabled RTC interrupts.
*
* @param base RTC peripheral base address
*
* @return The enabled interrupts. This is the logical OR of members of the
* enumeration ::rtc_interrupt_enable_t
*/
static inline uint32_t RTC_GetEnabledInterrupts(RTC_Type *base)
{
return (base->IER & (RTC_IER_TIIE_MASK | RTC_IER_TOIE_MASK | RTC_IER_TAIE_MASK | RTC_IER_TSIE_MASK));
}
/*! @}*/
/*!
* @name Status Interface
* @{
*/
/*!
* @brief Gets the RTC status flags.
*
* @param base RTC peripheral base address
*
* @return The status flags. This is the logical OR of members of the
* enumeration ::rtc_status_flags_t
*/
static inline uint32_t RTC_GetStatusFlags(RTC_Type *base)
{
return (base->SR & (RTC_SR_TIF_MASK | RTC_SR_TOF_MASK | RTC_SR_TAF_MASK));
}
/*!
* @brief Clears the RTC status flags.
*
* @param base RTC peripheral base address
* @param mask The status flags to clear. This is a logical OR of members of the
* enumeration ::rtc_status_flags_t
*/
void RTC_ClearStatusFlags(RTC_Type *base, uint32_t mask);
/*! @}*/
/*!
* @name Timer Start and Stop
* @{
*/
/*!
* @brief Starts the RTC time counter.
*
* After calling this function, the timer counter increments once a second provided SR[TOF] or
* SR[TIF] are not set.
*
* @param base RTC peripheral base address
*/
static inline void RTC_StartTimer(RTC_Type *base)
{
base->SR |= RTC_SR_TCE_MASK;
}
/*!
* @brief Stops the RTC time counter.
*
* RTC's seconds register can be written to only when the timer is stopped.
*
* @param base RTC peripheral base address
*/
static inline void RTC_StopTimer(RTC_Type *base)
{
base->SR &= ~RTC_SR_TCE_MASK;
}
/*! @}*/
#if (defined(FSL_FEATURE_RTC_HAS_OSC_SCXP) && FSL_FEATURE_RTC_HAS_OSC_SCXP)
/*!
* @brief This function sets the specified capacitor configuration for the RTC oscillator.
*
* @param base RTC peripheral base address
* @param capLoad Oscillator loads to enable. This is a logical OR of members of the
* enumeration ::rtc_osc_cap_load_t
*/
static inline void RTC_SetOscCapLoad(RTC_Type *base, uint32_t capLoad)
{
uint32_t reg = base->CR;
reg &= ~(RTC_CR_SC2P_MASK | RTC_CR_SC4P_MASK | RTC_CR_SC8P_MASK | RTC_CR_SC16P_MASK);
reg |= capLoad;
base->CR = reg;
}
#endif /* FSL_FEATURE_SCG_HAS_OSC_SCXP */
/*!
* @brief Performs a software reset on the RTC module.
*
* This resets all RTC registers except for the SWR bit and the RTC_WAR and RTC_RAR
* registers. The SWR bit is cleared by software explicitly clearing it.
*
* @param base RTC peripheral base address
*/
static inline void RTC_Reset(RTC_Type *base)
{
base->CR |= RTC_CR_SWR_MASK;
base->CR &= ~RTC_CR_SWR_MASK;
/* Set TSR register to 0x1 to avoid the timer invalid (TIF) bit being set in the SR register */
base->TSR = 1U;
}
#if defined(FSL_FEATURE_RTC_HAS_MONOTONIC) && (FSL_FEATURE_RTC_HAS_MONOTONIC)
/*!
* @name Monotonic counter functions
* @{
*/
/*!
* @brief Reads the values of the Monotonic Counter High and Monotonic Counter Low and returns
* them as a single value.
*
* @param base RTC peripheral base address
* @param counter Pointer to variable where the value is stored.
*/
void RTC_GetMonotonicCounter(RTC_Type *base, uint64_t *counter);
/*!
* @brief Writes values Monotonic Counter High and Monotonic Counter Low by decomposing
* the given single value.
*
* @param base RTC peripheral base address
* @param counter Counter value
*/
void RTC_SetMonotonicCounter(RTC_Type *base, uint64_t counter);
/*!
* @brief Increments the Monotonic Counter by one.
*
* Increments the Monotonic Counter (registers RTC_MCLR and RTC_MCHR accordingly) by setting
* the monotonic counter enable (MER[MCE]) and then writing to the RTC_MCLR register. A write to the
* monotonic counter low that causes it to overflow also increments the monotonic counter high.
*
* @param base RTC peripheral base address
*
* @return kStatus_Success: success
* kStatus_Fail: error occurred, either time invalid or monotonic overflow flag was found
*/
status_t RTC_IncrementMonotonicCounter(RTC_Type *base);
/*! @}*/
#endif /* FSL_FEATURE_RTC_HAS_MONOTONIC */
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_RTC_H_ */