libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/apollo2/libraries/drivers/regs/am_reg_sysctrl.h

654 lines
32 KiB
C
Raw Normal View History

Add bsp apollo2
2017-09-15 18:10:51 +08:00
//*****************************************************************************
//
// am_reg_sysctrl.h
//! @file
//!
//! @brief Register macros for the SYSCTRL module
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_REG_SYSCTRL_H
#define AM_REG_SYSCTRL_H
//*****************************************************************************
//
// Instance finder. (1 instance(s) available)
//
//*****************************************************************************
#define AM_REG_SYSCTRL_NUM_MODULES 1
#define AM_REG_SYSCTRLn(n) \
(REG_SYSCTRL_BASEADDR + 0x00000000 * n)
//*****************************************************************************
//
// Register offsets.
//
//*****************************************************************************
#define AM_REG_SYSCTRL_ICSR_O 0xE000ED04
#define AM_REG_SYSCTRL_VTOR_O 0xE000ED08
#define AM_REG_SYSCTRL_AIRCR_O 0xE000ED0C
#define AM_REG_SYSCTRL_SCR_O 0xE000ED10
#define AM_REG_SYSCTRL_CCR_O 0xE000ED14
#define AM_REG_SYSCTRL_SHPR1_O 0xE000ED18
#define AM_REG_SYSCTRL_SHPR2_O 0xE000ED1C
#define AM_REG_SYSCTRL_SHPR3_O 0xE000ED20
#define AM_REG_SYSCTRL_SHCSR_O 0xE000ED24
#define AM_REG_SYSCTRL_CFSR_O 0xE000ED28
#define AM_REG_SYSCTRL_HFSR_O 0xE000ED2C
#define AM_REG_SYSCTRL_MMFAR_O 0xE000ED34
#define AM_REG_SYSCTRL_BFAR_O 0xE000ED38
#define AM_REG_SYSCTRL_CPACR_O 0xE000ED88
#define AM_REG_SYSCTRL_DEMCR_O 0xE000EDFC
#define AM_REG_SYSCTRL_STIR_O 0xE000EF00
#define AM_REG_SYSCTRL_FPCCR_O 0xE000EF34
#define AM_REG_SYSCTRL_FPCAR_O 0xE000EF38
#define AM_REG_SYSCTRL_FPDSCR_O 0xE000EF3C
//*****************************************************************************
//
// SYSCTRL_ICSR - Interrupt Control and State Register
//
//*****************************************************************************
// Pend an NMI exception.
#define AM_REG_SYSCTRL_ICSR_NMIPENDSET_S 31
#define AM_REG_SYSCTRL_ICSR_NMIPENDSET_M 0x80000000
#define AM_REG_SYSCTRL_ICSR_NMIPENDSET(n) (((uint32_t)(n) << 31) & 0x80000000)
// Set the PendSV interrupt as pending.
#define AM_REG_SYSCTRL_ICSR_PENDSVSET_S 28
#define AM_REG_SYSCTRL_ICSR_PENDSVSET_M 0x10000000
#define AM_REG_SYSCTRL_ICSR_PENDSVSET(n) (((uint32_t)(n) << 28) & 0x10000000)
// Remove the pending status of the PendSV exception.
#define AM_REG_SYSCTRL_ICSR_PENDSVCLR_S 27
#define AM_REG_SYSCTRL_ICSR_PENDSVCLR_M 0x08000000
#define AM_REG_SYSCTRL_ICSR_PENDSVCLR(n) (((uint32_t)(n) << 27) & 0x08000000)
// Set the SysTick exception as pending.
#define AM_REG_SYSCTRL_ICSR_PENDSTSET_S 26
#define AM_REG_SYSCTRL_ICSR_PENDSTSET_M 0x04000000
#define AM_REG_SYSCTRL_ICSR_PENDSTSET(n) (((uint32_t)(n) << 26) & 0x04000000)
// Remove the pending status of the SysTick exception.
#define AM_REG_SYSCTRL_ICSR_PENDSTCLR_S 25
#define AM_REG_SYSCTRL_ICSR_PENDSTCLR_M 0x02000000
#define AM_REG_SYSCTRL_ICSR_PENDSTCLR(n) (((uint32_t)(n) << 25) & 0x02000000)
// Indicates whether a pending exception will be serviced on exit from debug
// halt state.
#define AM_REG_SYSCTRL_ICSR_ISRPREEMPT_S 23
#define AM_REG_SYSCTRL_ICSR_ISRPREEMPT_M 0x00800000
#define AM_REG_SYSCTRL_ICSR_ISRPREEMPT(n) (((uint32_t)(n) << 23) & 0x00800000)
// Indicates whether an external interrupt, generated by the NVIC, is pending.
#define AM_REG_SYSCTRL_ICSR_ISRPENDING_S 22
#define AM_REG_SYSCTRL_ICSR_ISRPENDING_M 0x00400000
#define AM_REG_SYSCTRL_ICSR_ISRPENDING(n) (((uint32_t)(n) << 22) & 0x00400000)
// The exception number of the highest priority pending exception.
#define AM_REG_SYSCTRL_ICSR_VECTPENDING_S 12
#define AM_REG_SYSCTRL_ICSR_VECTPENDING_M 0x001FF000
#define AM_REG_SYSCTRL_ICSR_VECTPENDING(n) (((uint32_t)(n) << 12) & 0x001FF000)
// Indicates whether there is an active exception other than the exception shown
// by IPSR.
#define AM_REG_SYSCTRL_ICSR_RETTOBASE_S 11
#define AM_REG_SYSCTRL_ICSR_RETTOBASE_M 0x00000800
#define AM_REG_SYSCTRL_ICSR_RETTOBASE(n) (((uint32_t)(n) << 11) & 0x00000800)
// The exception number of the current executing exception.
#define AM_REG_SYSCTRL_ICSR_VECTACTIVE_S 0
#define AM_REG_SYSCTRL_ICSR_VECTACTIVE_M 0x000001FF
#define AM_REG_SYSCTRL_ICSR_VECTACTIVE(n) (((uint32_t)(n) << 0) & 0x000001FF)
//*****************************************************************************
//
// SYSCTRL_VTOR - Vector Table Offset Register.
//
//*****************************************************************************
// Vector table base address.
#define AM_REG_SYSCTRL_VTOR_VALUE_S 0
#define AM_REG_SYSCTRL_VTOR_VALUE_M 0xFFFFFFFF
#define AM_REG_SYSCTRL_VTOR_VALUE(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// SYSCTRL_AIRCR - Application Interrupt and Reset Control Register.
//
//*****************************************************************************
// Register writes must write 0x5FA to this field, otherwise the write is
// ignored.
#define AM_REG_SYSCTRL_AIRCR_VECTKEY_S 16
#define AM_REG_SYSCTRL_AIRCR_VECTKEY_M 0xFFFF0000
#define AM_REG_SYSCTRL_AIRCR_VECTKEY(n) (((uint32_t)(n) << 16) & 0xFFFF0000)
// Indicates endianness of memory architecture. (Little = 0, Big = 1)
#define AM_REG_SYSCTRL_AIRCR_ENDIANNESS_S 15
#define AM_REG_SYSCTRL_AIRCR_ENDIANNESS_M 0x00008000
#define AM_REG_SYSCTRL_AIRCR_ENDIANNESS(n) (((uint32_t)(n) << 15) & 0x00008000)
// Priority grouping, indicates the binary point position.
#define AM_REG_SYSCTRL_AIRCR_PRIGROUP_S 8
#define AM_REG_SYSCTRL_AIRCR_PRIGROUP_M 0x00000700
#define AM_REG_SYSCTRL_AIRCR_PRIGROUP(n) (((uint32_t)(n) << 8) & 0x00000700)
// Writing a 1 to this bit reqests a local reset.
#define AM_REG_SYSCTRL_AIRCR_SYSRESETREQ_S 2
#define AM_REG_SYSCTRL_AIRCR_SYSRESETREQ_M 0x00000004
#define AM_REG_SYSCTRL_AIRCR_SYSRESETREQ(n) (((uint32_t)(n) << 2) & 0x00000004)
// Writing a 1 to this bit clears all active state information for fixed and
// configurable exceptions.
#define AM_REG_SYSCTRL_AIRCR_VECTCLRACTIVE_S 1
#define AM_REG_SYSCTRL_AIRCR_VECTCLRACTIVE_M 0x00000002
#define AM_REG_SYSCTRL_AIRCR_VECTCLRACTIVE(n) (((uint32_t)(n) << 1) & 0x00000002)
// Writing a 1 to this bit causes a local system reset.
#define AM_REG_SYSCTRL_AIRCR_VECTRESET_S 0
#define AM_REG_SYSCTRL_AIRCR_VECTRESET_M 0x00000001
#define AM_REG_SYSCTRL_AIRCR_VECTRESET(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// SYSCTRL_SCR - System Control Register.
//
//*****************************************************************************
// Determines whether a pending interrupt is a wakeup event.
#define AM_REG_SYSCTRL_SCR_SEVONPEND_S 4
#define AM_REG_SYSCTRL_SCR_SEVONPEND_M 0x00000010
#define AM_REG_SYSCTRL_SCR_SEVONPEND(n) (((uint32_t)(n) << 4) & 0x00000010)
// Determines whether the sleep mode should be regular or deep sleep
#define AM_REG_SYSCTRL_SCR_SLEEPDEEP_S 2
#define AM_REG_SYSCTRL_SCR_SLEEPDEEP_M 0x00000004
#define AM_REG_SYSCTRL_SCR_SLEEPDEEP(n) (((uint32_t)(n) << 2) & 0x00000004)
// Determines whether the processor shoudl automatically sleep when an ISR
// returns to the base-level.
#define AM_REG_SYSCTRL_SCR_SLEEPONEXIT_S 1
#define AM_REG_SYSCTRL_SCR_SLEEPONEXIT_M 0x00000002
#define AM_REG_SYSCTRL_SCR_SLEEPONEXIT(n) (((uint32_t)(n) << 1) & 0x00000002)
//*****************************************************************************
//
// SYSCTRL_CCR - Configuration and Control Register.
//
//*****************************************************************************
// Set to force 8-byte alignment for the stack pointer.
#define AM_REG_SYSCTRL_CCR_STKALIGN_S 9
#define AM_REG_SYSCTRL_CCR_STKALIGN_M 0x00000200
#define AM_REG_SYSCTRL_CCR_STKALIGN(n) (((uint32_t)(n) << 9) & 0x00000200)
// Set to ignore precise data access faults during hard fault handlers.
#define AM_REG_SYSCTRL_CCR_BFHFNMIGN_S 8
#define AM_REG_SYSCTRL_CCR_BFHFNMIGN_M 0x00000100
#define AM_REG_SYSCTRL_CCR_BFHFNMIGN(n) (((uint32_t)(n) << 8) & 0x00000100)
// Set to enable trapping on divide-by-zero.
#define AM_REG_SYSCTRL_CCR_DIV0TRP_S 4
#define AM_REG_SYSCTRL_CCR_DIV0TRP_M 0x00000010
#define AM_REG_SYSCTRL_CCR_DIV0TRP(n) (((uint32_t)(n) << 4) & 0x00000010)
// Set to enable trapping of unaligned word or halfword accesses.
#define AM_REG_SYSCTRL_CCR_UNALIGNTRP_S 3
#define AM_REG_SYSCTRL_CCR_UNALIGNTRP_M 0x00000008
#define AM_REG_SYSCTRL_CCR_UNALIGNTRP(n) (((uint32_t)(n) << 3) & 0x00000008)
// Set to allow unpriveleged software to access the STIR
#define AM_REG_SYSCTRL_CCR_USERSETMPEND_S 1
#define AM_REG_SYSCTRL_CCR_USERSETMPEND_M 0x00000002
#define AM_REG_SYSCTRL_CCR_USERSETMPEND(n) (((uint32_t)(n) << 1) & 0x00000002)
// Set to enable the processor to enter Thread mode at an execution priority
// other than base level.
#define AM_REG_SYSCTRL_CCR_NONBASETHRDENA_S 0
#define AM_REG_SYSCTRL_CCR_NONBASETHRDENA_M 0x00000001
#define AM_REG_SYSCTRL_CCR_NONBASETHRDENA(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// SYSCTRL_SHPR1 - System Handler Priority Register 1.
//
//*****************************************************************************
// Reserved for priority of system handler 7.
#define AM_REG_SYSCTRL_SHPR1_PRI_7_S 24
#define AM_REG_SYSCTRL_SHPR1_PRI_7_M 0xFF000000
#define AM_REG_SYSCTRL_SHPR1_PRI_7(n) (((uint32_t)(n) << 24) & 0xFF000000)
// Priority of system handler 6, UsageFault.
#define AM_REG_SYSCTRL_SHPR1_PRI_6_S 16
#define AM_REG_SYSCTRL_SHPR1_PRI_6_M 0x00FF0000
#define AM_REG_SYSCTRL_SHPR1_PRI_6(n) (((uint32_t)(n) << 16) & 0x00FF0000)
// Priority of system handler 5, BusFault.
#define AM_REG_SYSCTRL_SHPR1_PRI_5_S 8
#define AM_REG_SYSCTRL_SHPR1_PRI_5_M 0x0000FF00
#define AM_REG_SYSCTRL_SHPR1_PRI_5(n) (((uint32_t)(n) << 8) & 0x0000FF00)
// Priority of system handler 4, MemManage.
#define AM_REG_SYSCTRL_SHPR1_PRI_4_S 0
#define AM_REG_SYSCTRL_SHPR1_PRI_4_M 0x000000FF
#define AM_REG_SYSCTRL_SHPR1_PRI_4(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// SYSCTRL_SHPR2 - System Handler Priority Register 2.
//
//*****************************************************************************
// Priority of system handler 11, SVCall.
#define AM_REG_SYSCTRL_SHPR2_PRI_11_S 24
#define AM_REG_SYSCTRL_SHPR2_PRI_11_M 0xFF000000
#define AM_REG_SYSCTRL_SHPR2_PRI_11(n) (((uint32_t)(n) << 24) & 0xFF000000)
// Reserved for priority of system handler 10.
#define AM_REG_SYSCTRL_SHPR2_PRI_10_S 16
#define AM_REG_SYSCTRL_SHPR2_PRI_10_M 0x00FF0000
#define AM_REG_SYSCTRL_SHPR2_PRI_10(n) (((uint32_t)(n) << 16) & 0x00FF0000)
// Reserved for priority of system handler 9.
#define AM_REG_SYSCTRL_SHPR2_PRI_9_S 8
#define AM_REG_SYSCTRL_SHPR2_PRI_9_M 0x0000FF00
#define AM_REG_SYSCTRL_SHPR2_PRI_9(n) (((uint32_t)(n) << 8) & 0x0000FF00)
// Reserved for priority of system handler 8.
#define AM_REG_SYSCTRL_SHPR2_PRI_8_S 0
#define AM_REG_SYSCTRL_SHPR2_PRI_8_M 0x000000FF
#define AM_REG_SYSCTRL_SHPR2_PRI_8(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// SYSCTRL_SHPR3 - System Handler Priority Register 3.
//
//*****************************************************************************
// Priority of system handler 15, SysTick.
#define AM_REG_SYSCTRL_SHPR3_PRI_15_S 24
#define AM_REG_SYSCTRL_SHPR3_PRI_15_M 0xFF000000
#define AM_REG_SYSCTRL_SHPR3_PRI_15(n) (((uint32_t)(n) << 24) & 0xFF000000)
// Priority of system handler 14, PendSV.
#define AM_REG_SYSCTRL_SHPR3_PRI_14_S 16
#define AM_REG_SYSCTRL_SHPR3_PRI_14_M 0x00FF0000
#define AM_REG_SYSCTRL_SHPR3_PRI_14(n) (((uint32_t)(n) << 16) & 0x00FF0000)
// Reserved for priority of system handler 13.
#define AM_REG_SYSCTRL_SHPR3_PRI_13_S 8
#define AM_REG_SYSCTRL_SHPR3_PRI_13_M 0x0000FF00
#define AM_REG_SYSCTRL_SHPR3_PRI_13(n) (((uint32_t)(n) << 8) & 0x0000FF00)
// Priority of system handler 12, DebugMonitor.
#define AM_REG_SYSCTRL_SHPR3_PRI_12_S 0
#define AM_REG_SYSCTRL_SHPR3_PRI_12_M 0x000000FF
#define AM_REG_SYSCTRL_SHPR3_PRI_12(n) (((uint32_t)(n) << 0) & 0x000000FF)
//*****************************************************************************
//
// SYSCTRL_SHCSR - System Handler Control and State Register.
//
//*****************************************************************************
// Set to enable UsageFault.
#define AM_REG_SYSCTRL_SHCSR_USAGEFAULTENA_S 18
#define AM_REG_SYSCTRL_SHCSR_USAGEFAULTENA_M 0x00040000
#define AM_REG_SYSCTRL_SHCSR_USAGEFAULTENA(n) (((uint32_t)(n) << 18) & 0x00040000)
// Set to enable BusFault.
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTENA_S 17
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTENA_M 0x00020000
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTENA(n) (((uint32_t)(n) << 17) & 0x00020000)
// Set to enable MemManageFault.
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTENA_S 16
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTENA_M 0x00010000
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTENA(n) (((uint32_t)(n) << 16) & 0x00010000)
// Set to pend the SVCall exception.
#define AM_REG_SYSCTRL_SHCSR_SVCALLPENDED_S 15
#define AM_REG_SYSCTRL_SHCSR_SVCALLPENDED_M 0x00008000
#define AM_REG_SYSCTRL_SHCSR_SVCALLPENDED(n) (((uint32_t)(n) << 15) & 0x00008000)
// Set to pend the BusFault exception.
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTPENDED_S 14
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTPENDED_M 0x00004000
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTPENDED(n) (((uint32_t)(n) << 14) & 0x00004000)
// Set to pend the MemManageFault exception.
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTPENDED_S 13
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTPENDED_M 0x00002000
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTPENDED(n) (((uint32_t)(n) << 13) & 0x00002000)
// Set to pend the UsageFault exception.
#define AM_REG_SYSCTRL_SHCSR_USGFAULTPENDED_S 12
#define AM_REG_SYSCTRL_SHCSR_USGFAULTPENDED_M 0x00001000
#define AM_REG_SYSCTRL_SHCSR_USGFAULTPENDED(n) (((uint32_t)(n) << 12) & 0x00001000)
// Set when SysTick is active.
#define AM_REG_SYSCTRL_SHCSR_SYSTICKACT_S 11
#define AM_REG_SYSCTRL_SHCSR_SYSTICKACT_M 0x00000800
#define AM_REG_SYSCTRL_SHCSR_SYSTICKACT(n) (((uint32_t)(n) << 11) & 0x00000800)
// Set when PendSV is active.
#define AM_REG_SYSCTRL_SHCSR_PENDSVACT_S 10
#define AM_REG_SYSCTRL_SHCSR_PENDSVACT_M 0x00000400
#define AM_REG_SYSCTRL_SHCSR_PENDSVACT(n) (((uint32_t)(n) << 10) & 0x00000400)
// Set when Monitor is active.
#define AM_REG_SYSCTRL_SHCSR_MONITORACT_S 8
#define AM_REG_SYSCTRL_SHCSR_MONITORACT_M 0x00000100
#define AM_REG_SYSCTRL_SHCSR_MONITORACT(n) (((uint32_t)(n) << 8) & 0x00000100)
// Set when SVCall is active.
#define AM_REG_SYSCTRL_SHCSR_SVCALLACT_S 7
#define AM_REG_SYSCTRL_SHCSR_SVCALLACT_M 0x00000080
#define AM_REG_SYSCTRL_SHCSR_SVCALLACT(n) (((uint32_t)(n) << 7) & 0x00000080)
// Set when UsageFault is active.
#define AM_REG_SYSCTRL_SHCSR_USGFAULTACT_S 3
#define AM_REG_SYSCTRL_SHCSR_USGFAULTACT_M 0x00000008
#define AM_REG_SYSCTRL_SHCSR_USGFAULTACT(n) (((uint32_t)(n) << 3) & 0x00000008)
// Set when BusFault is active.
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTACT_S 1
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTACT_M 0x00000002
#define AM_REG_SYSCTRL_SHCSR_BUSFAULTACT(n) (((uint32_t)(n) << 1) & 0x00000002)
// Set when MemManageFault is active.
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTACT_S 0
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTACT_M 0x00000001
#define AM_REG_SYSCTRL_SHCSR_MEMFAULTACT(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// SYSCTRL_CFSR - Configurable Fault Status Register.
//
//*****************************************************************************
// Divide by zero error has occurred.
#define AM_REG_SYSCTRL_CFSR_DIVBYZERO_S 25
#define AM_REG_SYSCTRL_CFSR_DIVBYZERO_M 0x02000000
#define AM_REG_SYSCTRL_CFSR_DIVBYZERO(n) (((uint32_t)(n) << 25) & 0x02000000)
// Unaligned access error has occurred.
#define AM_REG_SYSCTRL_CFSR_UNALIGNED_S 24
#define AM_REG_SYSCTRL_CFSR_UNALIGNED_M 0x01000000
#define AM_REG_SYSCTRL_CFSR_UNALIGNED(n) (((uint32_t)(n) << 24) & 0x01000000)
// A coprocessor access error has occurred.
#define AM_REG_SYSCTRL_CFSR_NOCP_S 19
#define AM_REG_SYSCTRL_CFSR_NOCP_M 0x00080000
#define AM_REG_SYSCTRL_CFSR_NOCP(n) (((uint32_t)(n) << 19) & 0x00080000)
// An integrity check error has occurred on EXC_RETURN.
#define AM_REG_SYSCTRL_CFSR_INVPC_S 18
#define AM_REG_SYSCTRL_CFSR_INVPC_M 0x00040000
#define AM_REG_SYSCTRL_CFSR_INVPC(n) (((uint32_t)(n) << 18) & 0x00040000)
// Instruction executed with invalid EPSR.T or EPSR.IT field.
#define AM_REG_SYSCTRL_CFSR_INVSTATE_S 17
#define AM_REG_SYSCTRL_CFSR_INVSTATE_M 0x00020000
#define AM_REG_SYSCTRL_CFSR_INVSTATE(n) (((uint32_t)(n) << 17) & 0x00020000)
// Processor attempted to execute an undefined instruction.
#define AM_REG_SYSCTRL_CFSR_UNDEFINSTR_S 16
#define AM_REG_SYSCTRL_CFSR_UNDEFINSTR_M 0x00010000
#define AM_REG_SYSCTRL_CFSR_UNDEFINSTR(n) (((uint32_t)(n) << 16) & 0x00010000)
// BFAR has valid contents.
#define AM_REG_SYSCTRL_CFSR_BFARVALID_S 15
#define AM_REG_SYSCTRL_CFSR_BFARVALID_M 0x00008000
#define AM_REG_SYSCTRL_CFSR_BFARVALID(n) (((uint32_t)(n) << 15) & 0x00008000)
// A bus fault occurred during FP lazy state preservation.
#define AM_REG_SYSCTRL_CFSR_LSPERR_S 13
#define AM_REG_SYSCTRL_CFSR_LSPERR_M 0x00002000
#define AM_REG_SYSCTRL_CFSR_LSPERR(n) (((uint32_t)(n) << 13) & 0x00002000)
// A derived bus fault has occurred on exception entry.
#define AM_REG_SYSCTRL_CFSR_STKERR_S 12
#define AM_REG_SYSCTRL_CFSR_STKERR_M 0x00001000
#define AM_REG_SYSCTRL_CFSR_STKERR(n) (((uint32_t)(n) << 12) & 0x00001000)
// A derived bus fault has occurred on exception return.
#define AM_REG_SYSCTRL_CFSR_UNSTKERR_S 11
#define AM_REG_SYSCTRL_CFSR_UNSTKERR_M 0x00000800
#define AM_REG_SYSCTRL_CFSR_UNSTKERR(n) (((uint32_t)(n) << 11) & 0x00000800)
// Imprecise data access error has occurred.
#define AM_REG_SYSCTRL_CFSR_IMPRECISERR_S 10
#define AM_REG_SYSCTRL_CFSR_IMPRECISERR_M 0x00000400
#define AM_REG_SYSCTRL_CFSR_IMPRECISERR(n) (((uint32_t)(n) << 10) & 0x00000400)
// A precise data access has occurrred. The faulting address is in BFAR.
#define AM_REG_SYSCTRL_CFSR_PRECISERR_S 9
#define AM_REG_SYSCTRL_CFSR_PRECISERR_M 0x00000200
#define AM_REG_SYSCTRL_CFSR_PRECISERR(n) (((uint32_t)(n) << 9) & 0x00000200)
// A bus fault on an instruction prefetch has occurred.
#define AM_REG_SYSCTRL_CFSR_IBUSERR_S 8
#define AM_REG_SYSCTRL_CFSR_IBUSERR_M 0x00000100
#define AM_REG_SYSCTRL_CFSR_IBUSERR(n) (((uint32_t)(n) << 8) & 0x00000100)
// MMAR has valid contents.
#define AM_REG_SYSCTRL_CFSR_MMARVALID_S 7
#define AM_REG_SYSCTRL_CFSR_MMARVALID_M 0x00000080
#define AM_REG_SYSCTRL_CFSR_MMARVALID(n) (((uint32_t)(n) << 7) & 0x00000080)
// MemManage fault occurred during FP lazy state preservation.
#define AM_REG_SYSCTRL_CFSR_MLSPERR_S 5
#define AM_REG_SYSCTRL_CFSR_MLSPERR_M 0x00000020
#define AM_REG_SYSCTRL_CFSR_MLSPERR(n) (((uint32_t)(n) << 5) & 0x00000020)
// Derived MemManage fault occurred on exception entry.
#define AM_REG_SYSCTRL_CFSR_MSTKERR_S 4
#define AM_REG_SYSCTRL_CFSR_MSTKERR_M 0x00000010
#define AM_REG_SYSCTRL_CFSR_MSTKERR(n) (((uint32_t)(n) << 4) & 0x00000010)
// Derived MemManage fault occurred on exception return.
#define AM_REG_SYSCTRL_CFSR_MUNSTKER_S 3
#define AM_REG_SYSCTRL_CFSR_MUNSTKER_M 0x00000008
#define AM_REG_SYSCTRL_CFSR_MUNSTKER(n) (((uint32_t)(n) << 3) & 0x00000008)
// Data access violation. Address is in MMAR.
#define AM_REG_SYSCTRL_CFSR_DACCVIOL_S 1
#define AM_REG_SYSCTRL_CFSR_DACCVIOL_M 0x00000002
#define AM_REG_SYSCTRL_CFSR_DACCVIOL(n) (((uint32_t)(n) << 1) & 0x00000002)
// MPU or Execute Never default memory map access violation.
#define AM_REG_SYSCTRL_CFSR_IACCVIOL_S 0
#define AM_REG_SYSCTRL_CFSR_IACCVIOL_M 0x00000001
#define AM_REG_SYSCTRL_CFSR_IACCVIOL(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// SYSCTRL_HFSR - Hard Fault Status Register.
//
//*****************************************************************************
// Debug event has occurred.
#define AM_REG_SYSCTRL_HFSR_DEBUGEVT_S 31
#define AM_REG_SYSCTRL_HFSR_DEBUGEVT_M 0x80000000
#define AM_REG_SYSCTRL_HFSR_DEBUGEVT(n) (((uint32_t)(n) << 31) & 0x80000000)
// Processor has elevated a configurable-priority fault to a HardFault.
#define AM_REG_SYSCTRL_HFSR_FORCED_S 30
#define AM_REG_SYSCTRL_HFSR_FORCED_M 0x40000000
#define AM_REG_SYSCTRL_HFSR_FORCED(n) (((uint32_t)(n) << 30) & 0x40000000)
// Vector table read fault has occurred.
#define AM_REG_SYSCTRL_HFSR_VECTTBL_S 1
#define AM_REG_SYSCTRL_HFSR_VECTTBL_M 0x00000002
#define AM_REG_SYSCTRL_HFSR_VECTTBL(n) (((uint32_t)(n) << 1) & 0x00000002)
//*****************************************************************************
//
// SYSCTRL_MMFAR - MemManage Fault Address Register.
//
//*****************************************************************************
// Address of the memory location that caused an MMU fault.
#define AM_REG_SYSCTRL_MMFAR_ADDRESS_S 0
#define AM_REG_SYSCTRL_MMFAR_ADDRESS_M 0xFFFFFFFF
#define AM_REG_SYSCTRL_MMFAR_ADDRESS(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// SYSCTRL_BFAR - Bus Fault Address Register.
//
//*****************************************************************************
// Address of the memory location that caused an Bus fault.
#define AM_REG_SYSCTRL_BFAR_ADDRESS_S 0
#define AM_REG_SYSCTRL_BFAR_ADDRESS_M 0xFFFFFFFF
#define AM_REG_SYSCTRL_BFAR_ADDRESS(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// SYSCTRL_CPACR - Coprocessor Access Control Register.
//
//*****************************************************************************
// Access priveleges for the Floating point unit. Must always match CP10.
#define AM_REG_SYSCTRL_CPACR_CP11_S 22
#define AM_REG_SYSCTRL_CPACR_CP11_M 0x00C00000
#define AM_REG_SYSCTRL_CPACR_CP11(n) (((uint32_t)(n) << 22) & 0x00C00000)
// Access priveleges for the Floating point unit. Must always match CP11.
#define AM_REG_SYSCTRL_CPACR_CP10_S 20
#define AM_REG_SYSCTRL_CPACR_CP10_M 0x00300000
#define AM_REG_SYSCTRL_CPACR_CP10(n) (((uint32_t)(n) << 20) & 0x00300000)
//*****************************************************************************
//
// SYSCTRL_DEMCR - Debug Exception and Monitor Control Register
//
//*****************************************************************************
// Global enable for all DWT and ITM features.
#define AM_REG_SYSCTRL_DEMCR_TRCENA_S 24
#define AM_REG_SYSCTRL_DEMCR_TRCENA_M 0x01000000
#define AM_REG_SYSCTRL_DEMCR_TRCENA(n) (((uint32_t)(n) << 24) & 0x01000000)
//*****************************************************************************
//
// SYSCTRL_STIR - Software Triggered Interrupt Register
//
//*****************************************************************************
// Vector number of the interrupt that should be triggered.
#define AM_REG_SYSCTRL_STIR_INTID_S 0
#define AM_REG_SYSCTRL_STIR_INTID_M 0xFFFFFFFF
#define AM_REG_SYSCTRL_STIR_INTID(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// SYSCTRL_FPCCR - Floating-Point Context Control Register.
//
//*****************************************************************************
// Set to enable automatic saving of FP registers on exception entry.
#define AM_REG_SYSCTRL_FPCCR_ASPEN_S 31
#define AM_REG_SYSCTRL_FPCCR_ASPEN_M 0x80000000
#define AM_REG_SYSCTRL_FPCCR_ASPEN(n) (((uint32_t)(n) << 31) & 0x80000000)
// Set to enable lazy context saving of FP registers on exception entry.
#define AM_REG_SYSCTRL_FPCCR_LSPEN_S 30
#define AM_REG_SYSCTRL_FPCCR_LSPEN_M 0x40000000
#define AM_REG_SYSCTRL_FPCCR_LSPEN(n) (((uint32_t)(n) << 30) & 0x40000000)
// Able to set DebugMonitor exception to pending on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_MONRDY_S 8
#define AM_REG_SYSCTRL_FPCCR_MONRDY_M 0x00000100
#define AM_REG_SYSCTRL_FPCCR_MONRDY(n) (((uint32_t)(n) << 8) & 0x00000100)
// Able to set BusFault exception to pending on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_BFRDY_S 6
#define AM_REG_SYSCTRL_FPCCR_BFRDY_M 0x00000040
#define AM_REG_SYSCTRL_FPCCR_BFRDY(n) (((uint32_t)(n) << 6) & 0x00000040)
// Able to set MemManage exception to pending on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_MMRDY_S 5
#define AM_REG_SYSCTRL_FPCCR_MMRDY_M 0x00000020
#define AM_REG_SYSCTRL_FPCCR_MMRDY(n) (((uint32_t)(n) << 5) & 0x00000020)
// Able to set HardFault exception to pending on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_HFRDY_S 4
#define AM_REG_SYSCTRL_FPCCR_HFRDY_M 0x00000010
#define AM_REG_SYSCTRL_FPCCR_HFRDY(n) (((uint32_t)(n) << 4) & 0x00000010)
// Running from Thread mode on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_THREAD_S 3
#define AM_REG_SYSCTRL_FPCCR_THREAD_M 0x00000008
#define AM_REG_SYSCTRL_FPCCR_THREAD(n) (((uint32_t)(n) << 3) & 0x00000008)
// Running from unprivileged mode on last FP stack allocation.
#define AM_REG_SYSCTRL_FPCCR_USER_S 1
#define AM_REG_SYSCTRL_FPCCR_USER_M 0x00000002
#define AM_REG_SYSCTRL_FPCCR_USER(n) (((uint32_t)(n) << 1) & 0x00000002)
// Lazy state preservation is active.
#define AM_REG_SYSCTRL_FPCCR_LSPACT_S 0
#define AM_REG_SYSCTRL_FPCCR_LSPACT_M 0x00000001
#define AM_REG_SYSCTRL_FPCCR_LSPACT(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// SYSCTRL_FPCAR - Floating-Point Context Address Register.
//
//*****************************************************************************
// Address of the unpopulated floating-point register space allocated on the
// exception stack frame.
#define AM_REG_SYSCTRL_FPCAR_ADDRESS_S 0
#define AM_REG_SYSCTRL_FPCAR_ADDRESS_M 0xFFFFFFFF
#define AM_REG_SYSCTRL_FPCAR_ADDRESS(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
//*****************************************************************************
//
// SYSCTRL_FPDSCR - Floating-Point Default Status Control Register.
//
//*****************************************************************************
// Default value for FPSCR.AHP.
#define AM_REG_SYSCTRL_FPDSCR_AHP_S 26
#define AM_REG_SYSCTRL_FPDSCR_AHP_M 0x04000000
#define AM_REG_SYSCTRL_FPDSCR_AHP(n) (((uint32_t)(n) << 26) & 0x04000000)
// Default value for FPSCR.DN.
#define AM_REG_SYSCTRL_FPDSCR_DN_S 25
#define AM_REG_SYSCTRL_FPDSCR_DN_M 0x02000000
#define AM_REG_SYSCTRL_FPDSCR_DN(n) (((uint32_t)(n) << 25) & 0x02000000)
// Default value for FPSCR.FZ.
#define AM_REG_SYSCTRL_FPDSCR_FZ_S 24
#define AM_REG_SYSCTRL_FPDSCR_FZ_M 0x01000000
#define AM_REG_SYSCTRL_FPDSCR_FZ(n) (((uint32_t)(n) << 24) & 0x01000000)
// Default value for FPSCR.RMode.
#define AM_REG_SYSCTRL_FPDSCR_RMODE_S 22
#define AM_REG_SYSCTRL_FPDSCR_RMODE_M 0x00C00000
#define AM_REG_SYSCTRL_FPDSCR_RMODE(n) (((uint32_t)(n) << 22) & 0x00C00000)
#endif // AM_REG_SYSCTRL_H