rt-thread/bsp/raspberry-pi/raspi4-64/driver/raspi4.h

#ifndef __RASPI4_H__
#define __RASPI4_H__

#include <rthw.h>

#define __REG32(x)              (*((volatile unsigned int *)(x)))

//base address
#define PER_BASE                (0xFE000000)

//gpio offset
#define GPIO_BASE_OFFSET        (0x00200000)

//pl011 offset
#define PL011_UART_BASE_OFFSET  (0x00201000)

//pactl cs offset
#define PACTL_CS_OFFSET         (0x00204E00)

//aux offset
#define AUX_BASE_OFFSET         (0x00215000)

//gpio
#define GPIO_BASE               (PER_BASE + GPIO_BASE_OFFSET)
#define GPIO_IRQ_NUM            (3)         //40 pin mode
#define IRQ_GPIO0               (96 + 49)   //bank0 (0 to 27)
#define IRQ_GPIO1               (96 + 50)   //bank1 (28 to 45)
#define IRQ_GPIO2               (96 + 51)   //bank2 (46 to 57)
#define IRQ_GPIO3               (96 + 52)   //bank3

//system timer
#define ARM_TIMER_IRQ           (64)
#define ARM_TIMER_BASE          (PER_BASE + 0xB000)
#define ARM_TIMER_LOAD          HWREG32(ARM_TIMER_BASE + 0x400)
#define ARM_TIMER_VALUE         HWREG32(ARM_TIMER_BASE + 0x404)
#define ARM_TIMER_CTRL          HWREG32(ARM_TIMER_BASE + 0x408)
#define ARM_TIMER_IRQCLR        HWREG32(ARM_TIMER_BASE + 0x40C)
#define ARM_TIMER_RAWIRQ        HWREG32(ARM_TIMER_BASE + 0x410)
#define ARM_TIMER_MASKIRQ       HWREG32(ARM_TIMER_BASE + 0x414)
#define ARM_TIMER_RELOAD        HWREG32(ARM_TIMER_BASE + 0x418)
#define ARM_TIMER_PREDIV        HWREG32(ARM_TIMER_BASE + 0x41C)
#define ARM_TIMER_CNTR          HWREG32(ARM_TIMER_BASE + 0x420)

//uart
#define UART_BASE               (PER_BASE + PL011_UART_BASE_OFFSET)
#define UART0_BASE              (UART_BASE + 0x0)
#define UART2_BASE              (UART_BASE + 0x400)
#define UART3_BASE              (UART_BASE + 0x600)
#define UART4_BASE              (UART_BASE + 0x800)
#define UART5_BASE              (UART_BASE + 0xA00)
#define IRQ_AUX_UART            (96 + 29)
#define UART_REFERENCE_CLOCK    (48000000)

//aux
#define AUX_BASE                (PER_BASE + AUX_BASE_OFFSET)
#define IRQ_PL011               (96 + 57)

//pactl cs
#define PACTL_CS_ADDR           (PER_BASE + PACTL_CS_OFFSET)
#define PACTL_CS                HWREG32(PACTL_CS_ADDR)
typedef enum
{
    IRQ_SPI0 = 0x00000000,
    IRQ_SPI1 = 0x00000002,
    IRQ_SPI2 = 0x00000004,
    IRQ_SPI3 = 0x00000008,
    IRQ_SPI4 = 0x00000010,
    IRQ_SPI5 = 0x00000020,
    IRQ_SPI6 = 0x00000040,
    IRQ_I2C0 = 0x00000100,
    IRQ_I2C1 = 0x00000200,
    IRQ_I2C2 = 0x00000400,
    IRQ_I2C3 = 0x00000800,
    IRQ_I2C4 = 0x00001000,
    IRQ_I2C5 = 0x00002000,
    IRQ_I2C6 = 0x00004000,
    IRQ_I2C7 = 0x00008000,
    IRQ_UART5 = 0x00010000,
    IRQ_UART4 = 0x00020000,
    IRQ_UART3 = 0x00040000,
    IRQ_UART2 = 0x00080000,
    IRQ_UART0 = 0x00100000
} PACTL_CS_VAL;

// 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control
#define CORE0_TIMER_IRQ_CTRL    HWREG32(0xFF800040)
#define TIMER_IRQ               30
#define NON_SECURE_TIMER_IRQ    (1 << 1)

//core timer
#define ST_BASE_OFFSET          (0x003000)
#define STIMER_BASE             (PER_BASE  + ST_BASE_OFFSET)
#define STIMER_CS               HWREG32(STIMER_BASE + 0x0000)
#define STIMER_CLO              HWREG32(STIMER_BASE + 0x0004)
#define STIMER_CHI              HWREG32(STIMER_BASE + 0x0008)
#define STIMER_C0               HWREG32(STIMER_BASE + 0x000C)
#define STIMER_C1               HWREG32(STIMER_BASE + 0x0010)
#define STIMER_C2               HWREG32(STIMER_BASE + 0x0014)
#define STIMER_C3               HWREG32(STIMER_BASE + 0x0018)

#define DELAY_MICROS(micros) \
do { \
    rt_uint32_t compare = STIMER_CLO + micros * 25; \
    while (STIMER_CLO < compare); \
} while (0) \

//mmc
#define MMC0_BASE_ADDR          (PER_BASE + 0x300000)
#define MMC2_BASE_ADDR          (PER_BASE + 0x340000)

//eth
#define MAC_REG_BASE_ADDR       (void *)(0xfd580000)
#define ETH_IRQ                 (160 + 29)
#define SEND_DATA_NO_CACHE      (0x08200000)
#define RECV_DATA_NO_CACHE      (0x08400000)

//gic max
#define MAX_HANDLERS                (256)
#define ARM_GIC_NR_IRQS             (512)
#define INTC_BASE                   (0xff800000)
#define ARM_GIC_MAX_NR              (512)
#define GIC_V2_BASE                 (INTC_BASE + 0x00040000)
#define GIC_V2_DISTRIBUTOR_BASE     (INTC_BASE + 0x00041000)
#define GIC_V2_CPU_INTERFACE_BASE   (INTC_BASE + 0x00042000)
#define GIC_V2_HYPERVISOR_BASE      (INTC_BASE + 0x00044000)
#define GIC_V2_VIRTUAL_CPU_BASE     (INTC_BASE + 0x00046000)

#define GIC_IRQ_START               0
#define GIC_ACK_INTID_MASK          0x000003ff

#define GIC_PL400_DISTRIBUTOR_PPTR  GIC_V2_DISTRIBUTOR_BASE
#define GIC_PL400_CONTROLLER_PPTR   GIC_V2_CPU_INTERFACE_BASE

/* the basic constants and interfaces needed by gic */
rt_inline rt_uint32_t platform_get_gic_dist_base(void)
{
    return GIC_PL400_DISTRIBUTOR_PPTR;
}

rt_inline rt_uint32_t platform_get_gic_cpu_base(void)
{
    return GIC_PL400_CONTROLLER_PPTR;
}

#endif