rt-thread/bsp/gd32450z-eval/drivers/drv_usart.c

/*
 * File      : usart.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2009, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author       Notes
 * 2009-01-05     Bernard      the first version
 * 2010-03-29     Bernard      remove interrupt Tx and DMA Rx mode
 * 2012-02-08     aozima       update for F4.
 * 2012-07-28     aozima       update for ART board.
 * 2016-05-28     armink       add DMA Rx mode
 */

#include <gd32f4xx.h>
#include <drv_usart.h>
#include <board.h>

#include <rtdevice.h>

/* GD32 uart driver */
// Todo: compress uart info
struct gd32_uart
{
    uint32_t uart_periph;           //Todo: 3bits
    IRQn_Type irqn;                 //Todo: 7bits
    
    rcu_periph_enum per_clk;        //Todo: 5bits
    rcu_periph_enum tx_gpio_clk;    //Todo: 5bits
    rcu_periph_enum rx_gpio_clk;    //Todo: 5bits

    uint32_t tx_port;               //Todo: 4bits
    uint16_t tx_af;                 //Todo: 4bits
    uint16_t tx_pin;                //Todo: 4bits
    
    uint32_t rx_port;               //Todo: 4bits
    uint16_t rx_af;                 //Todo: 4bits
    uint16_t rx_pin;                //Todo: 4bits
};

/**
* @brief UART MSP Initialization
*        This function configures the hardware resources used in this example:
*           - Peripheral's clock enable
*           - Peripheral's GPIO Configuration
*           - NVIC configuration for UART interrupt request enable
* @param huart: UART handle pointer
* @retval None
*/
void gd32_uart_gpio_init(struct gd32_uart *uart)
{
    /* enable USART clock */
    rcu_periph_clock_enable(uart->tx_gpio_clk);
    rcu_periph_clock_enable(uart->rx_gpio_clk);
    rcu_periph_clock_enable(uart->per_clk);

    /* connect port to USARTx_Tx */
    gpio_af_set(uart->tx_port, uart->tx_af, uart->tx_pin);

    /* connect port to USARTx_Rx */
    gpio_af_set(uart->rx_port, uart->rx_af, uart->rx_pin);

    /* configure USART Tx as alternate function push-pull */
    gpio_mode_set(uart->tx_port, GPIO_MODE_AF, GPIO_PUPD_PULLUP, uart->tx_pin);
    gpio_output_options_set(uart->tx_port, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, uart->tx_pin);

    /* configure USART Rx as alternate function push-pull */
    gpio_mode_set(uart->rx_port, GPIO_MODE_AF, GPIO_PUPD_PULLUP, uart->rx_pin);
    gpio_output_options_set(uart->rx_port, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, uart->rx_pin);
    
    NVIC_SetPriority(uart->irqn, 0);
    NVIC_EnableIRQ(uart->irqn);
}

static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
    struct gd32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    RT_ASSERT(cfg != RT_NULL);

    uart = (struct gd32_uart *)serial->parent.user_data;
    
    gd32_uart_gpio_init(uart);
    
    usart_baudrate_set(uart->uart_periph, cfg->baud_rate);

    switch (cfg->data_bits)
    {
    case DATA_BITS_9:
        usart_word_length_set(uart->uart_periph, USART_WL_9BIT);
        break;

    default:
        usart_word_length_set(uart->uart_periph, USART_WL_8BIT);
        break;
    }

    switch (cfg->stop_bits)
    {
    case STOP_BITS_2:
        usart_stop_bit_set(uart->uart_periph, USART_STB_2BIT);
        break;
    default:
        usart_stop_bit_set(uart->uart_periph, USART_STB_1BIT);
        break;
    }

    switch (cfg->parity)
    {
    case PARITY_ODD:
        usart_parity_config(uart->uart_periph, USART_PM_ODD);
        break;
    case PARITY_EVEN:
        usart_parity_config(uart->uart_periph, USART_PM_EVEN);
        break;
    default:
        usart_parity_config(uart->uart_periph, USART_PM_NONE);
        break;
    }

    usart_receive_config(uart->uart_periph, USART_RECEIVE_ENABLE);
    usart_transmit_config(uart->uart_periph, USART_TRANSMIT_ENABLE);
    usart_enable(uart->uart_periph);

    return RT_EOK;
}

static rt_err_t gd32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
    struct gd32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    uart = (struct gd32_uart *)serial->parent.user_data;

    switch (cmd)
    {
    case RT_DEVICE_CTRL_CLR_INT:
        /* disable rx irq */
        NVIC_DisableIRQ(uart->irqn);
        /* disable interrupt */
        usart_interrupt_disable(uart->uart_periph, USART_INTEN_RBNEIE);

        break;
    case RT_DEVICE_CTRL_SET_INT:
        /* enable rx irq */
        NVIC_EnableIRQ(uart->irqn);
        /* enable interrupt */
        usart_interrupt_enable(uart->uart_periph, USART_INTEN_RBNEIE);
        break;
    }

    return RT_EOK;
}

static int gd32_putc(struct rt_serial_device *serial, char ch)
{
    struct gd32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    uart = (struct gd32_uart *)serial->parent.user_data;

    usart_data_transmit(uart->uart_periph, ch);
    while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET));
    
    return 1;
}

static int gd32_getc(struct rt_serial_device *serial)
{
    int ch;
    struct gd32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    uart = (struct gd32_uart *)serial->parent.user_data;

    ch = -1;
    if (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET)
        ch = usart_data_receive(uart->uart_periph);
    return ch;
}

/**
 * Uart common interrupt process. This need add to uart ISR.
 *
 * @param serial serial device
 */
static void uart_isr(struct rt_serial_device *serial)
{
    struct gd32_uart *uart = (struct gd32_uart *) serial->parent.user_data;

    RT_ASSERT(uart != RT_NULL);

    /* UART in mode Receiver -------------------------------------------------*/
    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_RBNEIE) != RESET) &&
            (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET))
    {
        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
        /* Clear RXNE interrupt flag */
        usart_flag_clear(uart->uart_periph, USART_FLAG_RBNE);
    }
}

static const struct rt_uart_ops gd32_uart_ops =
{
    gd32_configure,
    gd32_control,
    gd32_putc,
    gd32_getc,
};

#if defined(RT_USING_USART0)
/* UART1 device driver structure */
struct gd32_uart usart0 =
{
    USART0,                                 // uart peripheral index
    USART0_IRQn,                            // uart iqrn
    RCU_USART0, RCU_GPIOA, RCU_GPIOA,       // periph clock, tx gpio clock, rt gpio clock
    GPIOA, GPIO_AF_7, GPIO_PIN_9,           // tx port, tx alternate, tx pin
    GPIOA, GPIO_AF_7, GPIO_PIN_10,          // rx port, rx alternate, rx pin
};
struct rt_serial_device serial0;

void USART0_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial0);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_USART0 */

#if defined(RT_USING_USART1)
/* UART1 device driver structure */
struct gd32_uart usart1 =
{
    USART1,                                 // uart peripheral index
    USART1_IRQn,                            // uart iqrn
    RCU_USART1, RCU_GPIOA, RCU_GPIOA,       // periph clock, tx gpio clock, rt gpio clock
    GPIOA, GPIO_AF_7, GPIO_PIN_2,           // tx port, tx alternate, tx pin
    GPIOA, GPIO_AF_7, GPIO_PIN_3,           // rx port, rx alternate, rx pin
};
struct rt_serial_device serial1;

void USART1_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial1);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART1 */

#if defined(RT_USING_USART2)
/* UART2 device driver structure */
struct gd32_uart usart2 =
{
    USART2,                                 // uart peripheral index
    USART2_IRQn,                            // uart iqrn
    RCU_USART2, RCU_GPIOB, RCU_GPIOB,       // periph clock, tx gpio clock, rt gpio clock
    GPIOB, GPIO_AF_7, GPIO_PIN_10,          // tx port, tx alternate, tx pin
    GPIOB, GPIO_AF_7, GPIO_PIN_11,          // rx port, rx alternate, rx pin
};
struct rt_serial_device serial2;

void USART2_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial2);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART2 */

#if defined(RT_USING_UART3)
/* UART3 device driver structure */
struct gd32_uart uart3 =
{
    UART3,                                 // uart peripheral index
    UART3_IRQn,                            // uart iqrn
    RCU_UART3, RCU_GPIOC, RCU_GPIOC,       // periph clock, tx gpio clock, rt gpio clock
    GPIOC, GPIO_AF_8, GPIO_PIN_10,         // tx port, tx alternate, tx pin
    GPIOC, GPIO_AF_8, GPIO_PIN_11,         // rx port, rx alternate, rx pin
};
struct rt_serial_device serial3;

void UART3_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial3);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART3 */

#if defined(RT_USING_UART4)
/* UART4 device driver structure */
struct gd32_uart uart4 =
{
    UART4,                                 // uart peripheral index
    UART4_IRQn,                            // uart iqrn
    RCU_UART4, RCU_GPIOC, RCU_GPIOD,       // periph clock, tx gpio clock, rt gpio clock
    GPIOC, GPIO_AF_8, GPIO_PIN_12,         // tx port, tx alternate, tx pin
    GPIOD, GPIO_AF_8, GPIO_PIN_2,          // rx port, rx alternate, rx pin
};
struct rt_serial_device serial4;

void UART4_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial4);

    /* leave interrupt */
    rt_interrupt_leave();
}
#endif /* RT_USING_UART4 */

#if defined(RT_USING_USART5)
/* UART5 device driver structure */
struct gd32_uart usart5 =
{
    USART5,                                 // uart peripheral index
    USART5_IRQn,                            // uart iqrn
    RCU_USART5, RCU_GPIOC, RCU_GPIOC,       // periph clock, tx gpio clock, rt gpio clock
    GPIOC, GPIO_AF_8, GPIO_PIN_6,           // tx port, tx alternate, tx pin
    GPIOC, GPIO_AF_8, GPIO_PIN_7,           // rx port, rx alternate, rx pin
};
struct rt_serial_device serial5;

void USART5_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial5);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART5 */

#if defined(RT_USING_UART6)
/* UART6 device driver structure */
struct gd32_uart uart6 =
{
    UART6,                                 // uart peripheral index
    UART6_IRQn,                            // uart iqrn
    RCU_UART6, RCU_GPIOE, RCU_GPIOE,       // periph clock, tx gpio clock, rt gpio clock
    GPIOE, GPIO_AF_8, GPIO_PIN_7,          // tx port, tx alternate, tx pin
    GPIOE, GPIO_AF_8, GPIO_PIN_8,          // rx port, rx alternate, rx pin
};
struct rt_serial_device serial6;

void UART6_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial6);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART6 */

#if defined(RT_USING_UART7)
/* UART7 device driver structure */
struct gd32_uart uart7 =
{
    UART7,                                 // uart peripheral index
    UART7_IRQn,                            // uart iqrn
    RCU_UART7, RCU_GPIOE, RCU_GPIOE,       // periph clock, tx gpio clock, rt gpio clock
    GPIOE, GPIO_AF_8, GPIO_PIN_0,          // tx port, tx alternate, tx pin
    GPIOE, GPIO_AF_8, GPIO_PIN_1,          // rx port, rx alternate, rx pin
};
struct rt_serial_device serial7;

void UART7_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial7);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART7 */


int gd32_hw_usart_init(void)
{
    struct gd32_uart *uart;
    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
    
#ifdef RT_USING_USART0
    uart = &usart0;

    serial0.ops    = &gd32_uart_ops;
    serial0.config = config;

    /* register UART1 device */
    rt_hw_serial_register(&serial0,
                          "uart0",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_USART0 */


#ifdef RT_USING_USART1
    uart = &usart1;

    serial1.ops    = &gd32_uart_ops;
    serial1.config = config;

    /* register UART1 device */
    rt_hw_serial_register(&serial1,
                          "uart1",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART1 */

#ifdef RT_USING_USART2
    uart = &usart2;

    serial2.ops    = &gd32_uart_ops;
    serial2.config = config;

    /* register UART2 device */
    rt_hw_serial_register(&serial2,
                          "uart2",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART2 */

#ifdef RT_USING_UART3
    uart = &uart3;

    serial3.ops    = &gd32_uart_ops;
    serial3.config = config;

    /* register UART3 device */
    rt_hw_serial_register(&serial3,
                          "uart3",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART3 */

#ifdef RT_USING_UART4
    uart = &uart4;

    serial4.ops    = &gd32_uart_ops;
    serial4.config = config;

    /* register UART4 device */
    rt_hw_serial_register(&serial4,
                          "uart4",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART4 */

#ifdef RT_USING_USART5
    uart = &usart5;

    serial5.ops    = &gd32_uart_ops;
    serial5.config = config;

    /* register UART5 device */
    rt_hw_serial_register(&serial5,
                          "uart5",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART5 */
    
#ifdef RT_USING_UART6
    uart = &uart6;

    serial6.ops    = &gd32_uart_ops;
    serial6.config = config;

    /* register UART6 device */
    rt_hw_serial_register(&serial6,
                          "uart6",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART6 */
    
#ifdef RT_USING_UART7
    uart = &uart7;

    serial7.ops    = &gd32_uart_ops;
    serial7.config = config;

    /* register UART7 device */
    rt_hw_serial_register(&serial7,
                          "uart7",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART7 */
    return 0;
}
INIT_BOARD_EXPORT(gd32_hw_usart_init);