2017-08-08 11:56:50 +08:00
|
|
|
/*
|
|
|
|
|
* File : drv_sd.c
|
|
|
|
|
* COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
|
*
|
|
|
|
|
* Change Logs:
|
|
|
|
|
* Date Author Notes
|
|
|
|
|
* 2017-08-08 Yang the first version
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <board.h>
|
|
|
|
|
|
|
|
|
|
#include "drv_sd.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static struct mci_device *_mci_device;
|
|
|
|
|
static uint8_t sdio_buffer[1024];
|
|
|
|
|
|
|
|
|
|
static rt_err_t rt_mci_init(rt_device_t dev)
|
|
|
|
|
{
|
|
|
|
|
rt_err_t result = RT_EOK;
|
|
|
|
|
|
|
|
|
|
return result;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static rt_err_t rt_mci_open(rt_device_t dev, rt_uint16_t oflag)
|
|
|
|
|
{
|
|
|
|
|
return RT_EOK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static rt_err_t rt_mci_close(rt_device_t dev)
|
|
|
|
|
{
|
|
|
|
|
return RT_EOK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static rt_size_t rt_mci_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
|
|
|
|
|
{
|
|
|
|
|
rt_uint8_t status = kStatus_Success;
|
|
|
|
|
struct mci_device *mci = (struct mci_device *)dev;
|
|
|
|
|
|
|
|
|
|
rt_mutex_take(&mci->lock, RT_WAITING_FOREVER);
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
|
/* non-aligned. */
|
|
|
|
|
uint32_t i;
|
|
|
|
|
rt_size_t sector_adr;
|
|
|
|
|
uint8_t* copy_buffer;
|
|
|
|
|
|
|
|
|
|
sector_adr = pos;
|
|
|
|
|
copy_buffer = (uint8_t*)buffer;
|
|
|
|
|
|
|
|
|
|
for(i=0; i<size; i++)
|
|
|
|
|
{
|
|
|
|
|
status=SD_ReadBlocks(&mci->card, sdio_buffer, sector_adr, 1);
|
|
|
|
|
|
|
|
|
|
memcpy(copy_buffer, sdio_buffer, mci->card.blockSize);
|
|
|
|
|
sector_adr ++;
|
|
|
|
|
copy_buffer += mci->card.blockSize;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_mutex_release(&_mci_device->lock);
|
|
|
|
|
|
|
|
|
|
if (status == kStatus_Success) return size;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static rt_size_t rt_mci_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
|
|
|
|
|
{
|
|
|
|
|
rt_uint8_t status = kStatus_Success;
|
|
|
|
|
struct mci_device *mci = (struct mci_device *)dev;
|
|
|
|
|
|
|
|
|
|
rt_mutex_take(&mci->lock, RT_WAITING_FOREVER);
|
|
|
|
|
|
|
|
|
|
{
|
|
|
|
|
/* non-aligned. */
|
|
|
|
|
uint32_t i;
|
|
|
|
|
rt_size_t sector_adr;
|
|
|
|
|
uint8_t* copy_buffer;
|
|
|
|
|
|
|
|
|
|
sector_adr = pos;
|
|
|
|
|
copy_buffer = (uint8_t*)buffer;
|
|
|
|
|
|
|
|
|
|
for(i = 0; i < size; i++)
|
|
|
|
|
{
|
|
|
|
|
memcpy(sdio_buffer, copy_buffer, mci->card.blockSize);
|
|
|
|
|
|
|
|
|
|
status = SD_WriteBlocks(&mci->card, sdio_buffer, sector_adr, 1);
|
|
|
|
|
|
|
|
|
|
sector_adr ++;
|
|
|
|
|
copy_buffer += mci->card.blockSize;
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* release and exit */
|
|
|
|
|
rt_mutex_release(&_mci_device->lock);
|
|
|
|
|
|
|
|
|
|
if (status == kStatus_Success) return size;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2017-10-16 13:23:03 +08:00
|
|
|
static rt_err_t rt_mci_control(rt_device_t dev, int cmd, void *args)
|
2017-08-08 11:56:50 +08:00
|
|
|
{
|
|
|
|
|
struct mci_device *mci = (struct mci_device *)dev;
|
|
|
|
|
|
|
|
|
|
RT_ASSERT(dev != RT_NULL);
|
|
|
|
|
|
|
|
|
|
if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
|
|
|
|
|
{
|
|
|
|
|
struct rt_device_blk_geometry *geometry;
|
|
|
|
|
|
|
|
|
|
geometry = (struct rt_device_blk_geometry *)args;
|
|
|
|
|
if (geometry == RT_NULL) return -RT_ERROR;
|
|
|
|
|
|
|
|
|
|
geometry->bytes_per_sector = mci->card.blockSize;
|
|
|
|
|
geometry->block_size = mci->card.csd.eraseSectorSize;
|
|
|
|
|
geometry->sector_count = mci->card.blockCount;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return RT_EOK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void sdio_init_pins(void)
|
|
|
|
|
{
|
|
|
|
|
const uint32_t port2_pin10_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_CARD_DET_N */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN10_IDX, port2_pin10_config); /* PORT2 PIN10 (coords: P1) is configured as SD_CARD_DET_N */
|
|
|
|
|
const uint32_t port2_pin3_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_CLK */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN3_IDX, port2_pin3_config); /* PORT2 PIN3 (coords: B1) is configured as SD_CLK */
|
|
|
|
|
const uint32_t port2_pin4_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_CMD */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN4_IDX, port2_pin4_config); /* PORT2 PIN4 (coords: D3) is configured as SD_CMD */
|
|
|
|
|
const uint32_t port2_pin5_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_POW_EN */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN5_IDX, port2_pin5_config); /* PORT2 PIN5 (coords: C1) is configured as SD_POW_EN */
|
|
|
|
|
const uint32_t port2_pin6_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_D(0) */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN6_IDX, port2_pin6_config); /* PORT2 PIN6 (coords: F3) is configured as SD_D(0) */
|
|
|
|
|
const uint32_t port2_pin7_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_D(1) */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN7_IDX, port2_pin7_config); /* PORT2 PIN7 (coords: J2) is configured as SD_D(1) */
|
|
|
|
|
const uint32_t port2_pin8_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_D(2) */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN8_IDX, port2_pin8_config); /* PORT2 PIN8 (coords: F4) is configured as SD_D(2) */
|
|
|
|
|
const uint32_t port2_pin9_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_D(3) */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_FAST | /* Fast mode, slew rate control is disabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN9_IDX, port2_pin9_config); /* PORT2 PIN9 (coords: K2) is configured as SD_D(3) */
|
|
|
|
|
const uint32_t port3_pin15_config = (
|
|
|
|
|
IOCON_PIO_FUNC2 | /* Pin is configured as SD_WR_PRT */
|
|
|
|
|
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
|
|
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
|
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
|
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
|
|
|
IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */
|
|
|
|
|
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
|
|
|
|
);
|
|
|
|
|
IOCON_PinMuxSet(IOCON, PORT3_IDX, PIN15_IDX, port3_pin15_config); /* PORT3 PIN15 (coords: D2) is configured as SD_WR_PRT */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sd_card_t g_sd;
|
|
|
|
|
|
|
|
|
|
/*! @brief Data written to the card */
|
|
|
|
|
uint8_t g_dataWrite[FSL_SDMMC_DEFAULT_BLOCK_SIZE * 5U];
|
|
|
|
|
/*! @brief Data read from the card */
|
|
|
|
|
uint8_t g_dataRead[FSL_SDMMC_DEFAULT_BLOCK_SIZE * 5U];
|
|
|
|
|
|
|
|
|
|
rt_err_t mci_hw_init(const char *device_name)
|
|
|
|
|
#if 0
|
|
|
|
|
{
|
|
|
|
|
sd_card_t *card = &g_sd;
|
|
|
|
|
bool isReadOnly;
|
|
|
|
|
bool failedFlag = false;
|
|
|
|
|
char ch = '0';
|
|
|
|
|
|
|
|
|
|
/* attach main clock to SDIF */
|
|
|
|
|
CLOCK_AttachClk(kMCLK_to_SDIO_CLK);
|
|
|
|
|
/* need call this function to clear the halt bit in clock divider register */
|
|
|
|
|
CLOCK_SetClkDiv(kCLOCK_DivSdioClk, 1U, true);
|
|
|
|
|
|
|
|
|
|
sdio_init_pins();
|
|
|
|
|
|
|
|
|
|
card->host.base = SDIF;
|
|
|
|
|
card->host.sourceClock_Hz = CLOCK_GetFreq(kCLOCK_SDio);
|
|
|
|
|
|
|
|
|
|
/* Init card. */
|
|
|
|
|
if (SD_Init(card))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("\r\nSD card init failed.\r\n");
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf("\r\nRead/Write/Erase the card continuously until encounter error......\r\n");
|
|
|
|
|
/* Check if card is readonly. */
|
|
|
|
|
isReadOnly = SD_CheckReadOnly(card);
|
|
|
|
|
if (isReadOnly)
|
|
|
|
|
{
|
|
|
|
|
//while (true)
|
|
|
|
|
{
|
|
|
|
|
/*if (failedFlag || (ch == 'q'))
|
|
|
|
|
{
|
|
|
|
|
break;
|
|
|
|
|
}*/
|
|
|
|
|
|
|
|
|
|
rt_kprintf("\r\nRead one data block......\r\n");
|
|
|
|
|
if (kStatus_Success != SD_ReadBlocks(card, g_dataRead, 2U, 1U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Read one data block failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf("Read multiple data blocks......\r\n");
|
|
|
|
|
if (kStatus_Success != SD_ReadBlocks(card, g_dataRead, 2U, 5U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Read multiple data blocks failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf(
|
|
|
|
|
"\r\nInput 'q' to quit read process.\
|
|
|
|
|
\r\nInput other char to read data blocks again.\r\n");
|
|
|
|
|
//ch = GETCHAR();
|
|
|
|
|
//PUTCHAR(ch);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
{
|
|
|
|
|
memset(g_dataWrite, 0x67U, sizeof(g_dataWrite));
|
|
|
|
|
|
|
|
|
|
//while (true)
|
|
|
|
|
{
|
|
|
|
|
/*if (failedFlag || (ch == 'q'))
|
|
|
|
|
{
|
|
|
|
|
break;
|
|
|
|
|
}*/
|
|
|
|
|
|
|
|
|
|
rt_kprintf("\r\nWrite/read one data block......\r\n");
|
|
|
|
|
if (kStatus_Success != SD_WriteBlocks(card, g_dataWrite, 2U, 1U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Write one data block failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
memset(g_dataRead, 0U, sizeof(g_dataRead));
|
|
|
|
|
if (kStatus_Success != SD_ReadBlocks(card, g_dataRead, 2U, 1U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Read one data block failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf("Compare the read/write content......\r\n");
|
|
|
|
|
if (memcmp(g_dataRead, g_dataWrite, FSL_SDMMC_DEFAULT_BLOCK_SIZE))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("The read/write content isn't consistent.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
rt_kprintf("The read/write content is consistent.\r\n");
|
|
|
|
|
|
|
|
|
|
rt_kprintf("Write/read multiple data blocks......\r\n");
|
|
|
|
|
if (kStatus_Success != SD_WriteBlocks(card, g_dataWrite, 2U, 5U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Write multiple data blocks failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
memset(g_dataRead, 0U, sizeof(g_dataRead));
|
|
|
|
|
|
|
|
|
|
if (kStatus_Success != SD_ReadBlocks(card, g_dataRead, 2U, 5U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Read multiple data blocks failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf("Compare the read/write content......\r\n");
|
|
|
|
|
if (memcmp(g_dataRead, g_dataWrite, FSL_SDMMC_DEFAULT_BLOCK_SIZE))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("The read/write content isn't consistent.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
rt_kprintf("The read/write content is consistent.\r\n");
|
|
|
|
|
|
|
|
|
|
rt_kprintf("Erase multiple data blocks......\r\n");
|
|
|
|
|
if (kStatus_Success != SD_EraseBlocks(card, 2U, 5U))
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("Erase multiple data blocks failed.\r\n");
|
|
|
|
|
failedFlag = true;
|
|
|
|
|
//continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
rt_kprintf(
|
|
|
|
|
"\r\nInput 'q' to quit read/write/erase process.\
|
|
|
|
|
\r\nInput other char to read/write/erase data blocks again.\r\n");
|
|
|
|
|
//ch = GETCHAR();
|
|
|
|
|
//PUTCHAR(ch);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
rt_kprintf("\r\nThe example will not read/write data blocks again.\r\n");
|
|
|
|
|
|
|
|
|
|
SD_Deinit(card);
|
|
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
{
|
|
|
|
|
_mci_device = (struct mci_device *)rt_malloc(sizeof(struct mci_device));
|
|
|
|
|
if (_mci_device == RT_NULL)
|
|
|
|
|
{
|
|
|
|
|
rt_kprintf("mci_hw_init _mci_device rt_malloc failed!\n");
|
|
|
|
|
return -RT_ERROR;
|
|
|
|
|
}
|
|
|
|
|
rt_memset(_mci_device, 0, sizeof(struct mci_device));
|
|
|
|
|
|
|
|
|
|
/* attach main clock to SDIF */
|
|
|
|
|
CLOCK_AttachClk(kMCLK_to_SDIO_CLK);
|
|
|
|
|
/* need call this function to clear the halt bit in clock divider register */
|
|
|
|
|
CLOCK_SetClkDiv(kCLOCK_DivSdioClk, 1U, true);
|
|
|
|
|
|
|
|
|
|
sdio_init_pins();
|
|
|
|
|
|
|
|
|
|
/* Save host information. */
|
|
|
|
|
_mci_device->card.host.base = SDIF;
|
|
|
|
|
_mci_device->card.host.sourceClock_Hz = CLOCK_GetFreq(kCLOCK_SDio);
|
|
|
|
|
|
|
|
|
|
if (kStatus_Success != SD_Init(&_mci_device->card))
|
|
|
|
|
{
|
|
|
|
|
SD_Deinit(&_mci_device->card);
|
|
|
|
|
memset(&_mci_device->card, 0U, sizeof(_mci_device->card));
|
|
|
|
|
rt_kprintf("SD_Init failed!\n");
|
|
|
|
|
return -RT_ERROR;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* initialize mutex lock */
|
|
|
|
|
rt_mutex_init(&_mci_device->lock, device_name, RT_IPC_FLAG_FIFO);
|
|
|
|
|
/* create finish event */
|
|
|
|
|
_mci_device->finish_event = rt_event_create(device_name, RT_IPC_FLAG_FIFO);
|
|
|
|
|
|
|
|
|
|
/* register sdcard device */
|
|
|
|
|
_mci_device->parent.type = RT_Device_Class_Block;
|
|
|
|
|
|
|
|
|
|
_mci_device->geometry.bytes_per_sector = 0;
|
|
|
|
|
_mci_device->geometry.sector_count = 0;
|
|
|
|
|
_mci_device->geometry.block_size = 0;
|
|
|
|
|
|
|
|
|
|
_mci_device->parent.init = rt_mci_init;
|
|
|
|
|
_mci_device->parent.open = rt_mci_open;
|
|
|
|
|
_mci_device->parent.close = rt_mci_close;
|
|
|
|
|
_mci_device->parent.read = rt_mci_read;
|
|
|
|
|
_mci_device->parent.write = rt_mci_write;
|
|
|
|
|
_mci_device->parent.control = rt_mci_control;
|
|
|
|
|
|
|
|
|
|
/* no private, no callback */
|
|
|
|
|
_mci_device->parent.user_data = RT_NULL;
|
|
|
|
|
_mci_device->parent.rx_indicate = RT_NULL;
|
|
|
|
|
_mci_device->parent.tx_complete = RT_NULL;
|
|
|
|
|
|
|
|
|
|
rt_device_register(&_mci_device->parent, device_name,
|
|
|
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE );
|
|
|
|
|
return RT_EOK;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
