rt-thread/bsp/phytium/board/board.c

314 lines
8.0 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Email: opensource_embedded@phytium.com.cn
*
* Change Logs:
* Date Author Notes
* 2022-10-26 huanghe first commit
* 2022-10-26 zhugengyu support aarch64
* 2023-04-13 zhugengyu support RT-Smart
* 2023-07-27 zhugengyu update aarch32 gtimer usage
*
*/
#include "rtconfig.h"
#include <rthw.h>
#include <rtthread.h>
#include <mmu.h>
#include <mm_aspace.h> /* TODO: why need application space when RT_SMART off */
#include <mm_page.h>
#include "phytium_interrupt.h"
#ifdef RT_USING_SMART
#include <page.h>
#include <lwp_arch.h>
#endif
#include <gicv3.h>
#if defined(TARGET_ARMV8_AARCH64)
#include <psci.h>
#include <gtimer.h>
#include <cpuport.h>
#else
#include <gtimer.h>
#endif
#include <interrupt.h>
#include <board.h>
#include "fearly_uart.h"
#include "fcpu_info.h"
#include "fiopad.h"
#ifdef RT_USING_SMP
#include "fpsci.h"
#endif
extern FIOPadCtrl iopad_ctrl;
/* mmu config */
extern struct mem_desc platform_mem_desc[];
extern const rt_uint32_t platform_mem_desc_size;
void idle_wfi(void)
{
asm volatile("wfi");
}
/**
* This function will initialize board
*/
extern size_t MMUTable[];
rt_region_t init_page_region =
{
PAGE_START,
PAGE_END
};
void FIOMuxInit(void)
{
FIOPadCfgInitialize(&iopad_ctrl, FIOPadLookupConfig(FIOPAD0_ID));
#ifdef RT_USING_SMART
iopad_ctrl.config.base_address = (uintptr)rt_ioremap((void *)iopad_ctrl.config.base_address, 0x2000);
#endif
return;
}
#if defined(TARGET_ARMV8_AARCH64) /* AARCH64 */
/* aarch64 use kernel gtimer */
#else /* AARCH32 */
/* aarch32 implment gtimer by bsp */
static rt_uint32_t timer_step;
#define CNTP_CTL_ENABLE (1U << 0) /* Enables the timer */
#define CNTP_CTL_IMASK (1U << 1) /* Timer interrupt mask bit */
#define CNTP_CTL_ISTATUS (1U << 2) /* The status of the timer */
void GenericTimerInterruptEnable(u32 id)
{
u64 ctrl = gtimer_get_control();
if (ctrl & CNTP_CTL_IMASK)
{
ctrl &= ~CNTP_CTL_IMASK;
gtimer_set_control(ctrl);
}
}
void GenericTimerStart(u32 id)
{
u32 ctrl = gtimer_get_control(); /* get CNTP_CTL */
if (!(ctrl & CNTP_CTL_ENABLE))
{
ctrl |= CNTP_CTL_ENABLE; /* enable gtimer if off */
gtimer_set_control(ctrl); /* set CNTP_CTL */
}
}
void rt_hw_timer_isr(int vector, void *parameter)
{
gtimer_set_load_value(timer_step);
rt_tick_increase();
}
int rt_hw_timer_init(void)
{
rt_hw_interrupt_install(GENERIC_TIMER_NS_IRQ_NUM, rt_hw_timer_isr, RT_NULL, "tick");
rt_hw_interrupt_umask(GENERIC_TIMER_NS_IRQ_NUM);
timer_step = gtimer_get_counter_frequency();
FASSERT_MSG((timer_step > 1000000), "invalid freqency %ud", timer_step);
timer_step /= RT_TICK_PER_SECOND;
gtimer_set_load_value(timer_step);
GenericTimerInterruptEnable(GENERIC_TIMER_ID0);
GenericTimerStart(GENERIC_TIMER_ID0);
return 0;
}
INIT_BOARD_EXPORT(rt_hw_timer_init);
#endif
#ifdef RT_USING_SMP
void rt_hw_ipi_handler_install(int ipi_vector, rt_isr_handler_t ipi_isr_handler);
#endif
#if defined(TARGET_ARMV8_AARCH64)
void rt_hw_board_aarch64_init(void)
{
/* AARCH64 */
#if defined(RT_USING_SMART)
/* 1. init rt_kernel_space table (aspace.start = KERNEL_VADDR_START , aspace.size = ), 2. init io map range (rt_ioremap_start \ rt_ioremap_size) 3. */
rt_hw_mmu_map_init(&rt_kernel_space, (void *)0xfffffffff0000000, 0x10000000, MMUTable, PV_OFFSET);
#else
rt_hw_mmu_map_init(&rt_kernel_space, (void *)0xffffd0000000, 0x10000000, MMUTable, 0);
#endif
rt_page_init(init_page_region);
rt_hw_mmu_setup(&rt_kernel_space, platform_mem_desc, platform_mem_desc_size);
/* init memory pool */
#ifdef RT_USING_HEAP
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
#endif
phytium_interrupt_init();
rt_hw_gtimer_init();
FEarlyUartProbe();
FIOMuxInit();
/* compoent init */
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
/* shell init */
#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
/* set console device */
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
rt_thread_idle_sethook(idle_wfi);
#ifdef RT_USING_SMP
FPsciInit();
/* install IPI handle */
rt_hw_interrupt_set_priority(RT_SCHEDULE_IPI, 16);
rt_hw_ipi_handler_install(RT_SCHEDULE_IPI, rt_scheduler_ipi_handler);
rt_hw_interrupt_umask(RT_SCHEDULE_IPI);
#endif
}
#else
#if defined(TARGET_E2000D)
#define FT_GIC_REDISTRUBUTIOR_OFFSET 2
#endif
void rt_hw_board_aarch32_init(void)
{
#if defined(RT_USING_SMART)
rt_uint32_t mmutable_p = 0;
/* set io map range is 0xf0000000 ~ 0x10000000 , Memory Protection start address is 0xf0000000 - rt_mpr_size */
rt_hw_mmu_map_init(&rt_kernel_space, (void *)0xf0000000, 0x10000000, MMUTable, PV_OFFSET);
rt_hw_init_mmu_table(platform_mem_desc,platform_mem_desc_size) ;
mmutable_p = (rt_uint32_t)MMUTable + (rt_uint32_t)PV_OFFSET ;
rt_hw_mmu_switch(mmutable_p) ;
rt_page_init(init_page_region);
/* rt_kernel_space 在start_gcc.S 中被初始化此函数将iomap 空间放置在kernel space 上 */
rt_hw_mmu_ioremap_init(&rt_kernel_space, (void *)0xf0000000, 0x10000000);
arch_kuser_init(&rt_kernel_space, (void *)0xffff0000);
#else
rt_hw_mmu_map_init(&rt_kernel_space, (void *)0x80000000, 0x10000000, MMUTable, 0);
rt_hw_init_mmu_table(platform_mem_desc,platform_mem_desc_size) ;
rt_hw_mmu_init();
rt_hw_mmu_ioremap_init(&rt_kernel_space, (void *)0x80000000, 0x10000000);
#endif
/* init memory pool */
#ifdef RT_USING_HEAP
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
#endif
extern int rt_hw_cpu_id(void);
u32 cpu_id, cpu_offset = 0;
GetCpuId(&cpu_id);
#if defined(FT_GIC_REDISTRUBUTIOR_OFFSET)
cpu_offset = FT_GIC_REDISTRUBUTIOR_OFFSET ;
#endif
rt_uint32_t redist_addr = 0;
FEarlyUartProbe();
FIOMuxInit();
#if defined(RT_USING_SMART)
redist_addr = (uint32_t)rt_ioremap(GICV3_RD_BASE_ADDR, 4 * 128 * 1024);
#else
redist_addr = GICV3_RD_BASE_ADDR;
#endif
arm_gic_redist_address_set(0, redist_addr + (cpu_id + cpu_offset) * GICV3_RD_OFFSET, rt_hw_cpu_id());
2023-08-29 10:27:54 +08:00
#if defined(TARGET_E2000Q) || defined(TARGET_PHYTIUMPI)
#if RT_CPUS_NR == 2
arm_gic_redist_address_set(0, redist_addr + 3 * GICV3_RD_OFFSET, 1);
#elif RT_CPUS_NR == 3
arm_gic_redist_address_set(0, redist_addr + 3 * GICV3_RD_OFFSET, 1);
arm_gic_redist_address_set(0, redist_addr, 2);
#elif RT_CPUS_NR == 4
arm_gic_redist_address_set(0, redist_addr + 3 * GICV3_RD_OFFSET, 1);
arm_gic_redist_address_set(0, redist_addr, 2);
arm_gic_redist_address_set(0, redist_addr + GICV3_RD_OFFSET, 3);
#endif
#else
#if RT_CPUS_NR == 2
arm_gic_redist_address_set(0, redist_addr + (1 + cpu_offset) * GICV3_RD_OFFSET, 1);
#elif RT_CPUS_NR == 3
arm_gic_redist_address_set(0, redist_addr + (1 + cpu_offset) * GICV3_RD_OFFSET, 1);
arm_gic_redist_address_set(0, redist_addr + (2 + cpu_offset) * GICV3_RD_OFFSET, 2);
#elif RT_CPUS_NR == 4
arm_gic_redist_address_set(0, redist_addr + (1 + cpu_offset) * GICV3_RD_OFFSET, 1);
arm_gic_redist_address_set(0, redist_addr + (2 + cpu_offset) * GICV3_RD_OFFSET, 2);
arm_gic_redist_address_set(0, redist_addr + (3 + cpu_offset) * GICV3_RD_OFFSET, 3);
#endif
#endif
rt_hw_interrupt_init();
/* compoent init */
#ifdef RT_USING_COMPONENTS_INIT
rt_components_board_init();
#endif
/* shell init */
#if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE)
/* set console device */
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
rt_thread_idle_sethook(idle_wfi);
#ifdef RT_USING_SMP
FPsciInit();
/* install IPI handle */
rt_hw_interrupt_set_priority(RT_SCHEDULE_IPI, 16);
rt_hw_ipi_handler_install(RT_SCHEDULE_IPI, rt_scheduler_ipi_handler);
rt_hw_interrupt_umask(RT_SCHEDULE_IPI);
#endif
}
#endif
/**
* This function will initialize hardware board
*/
void rt_hw_board_init(void)
{
#if defined(TARGET_ARMV8_AARCH64)
rt_hw_board_aarch64_init();
#else
rt_hw_board_aarch32_init();
#endif
}