rt-thread/bsp/stm32/libraries/HAL_Drivers/drv_usbd.c

277 lines
6.7 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-04-10 ZYH first version
* 2019-10-27 flybreak Compatible with the HS
*/
#include <rtthread.h>
#ifdef BSP_USING_USBD
#include <rtdevice.h>
#include "board.h"
#include <string.h>
#include <drv_config.h>
static PCD_HandleTypeDef _stm_pcd;
static struct udcd _stm_udc;
static struct ep_id _ep_pool[] =
{
{0x0, USB_EP_ATTR_CONTROL, USB_DIR_INOUT, 64, ID_ASSIGNED },
{0x1, USB_EP_ATTR_BULK, USB_DIR_IN, 64, ID_UNASSIGNED},
{0x1, USB_EP_ATTR_BULK, USB_DIR_OUT, 64, ID_UNASSIGNED},
{0x2, USB_EP_ATTR_INT, USB_DIR_IN, 64, ID_UNASSIGNED},
{0x2, USB_EP_ATTR_INT, USB_DIR_OUT, 64, ID_UNASSIGNED},
{0x3, USB_EP_ATTR_BULK, USB_DIR_IN, 64, ID_UNASSIGNED},
#if !defined(SOC_SERIES_STM32F1)
{0x3, USB_EP_ATTR_BULK, USB_DIR_OUT, 64, ID_UNASSIGNED},
#endif
{0xFF, USB_EP_ATTR_TYPE_MASK, USB_DIR_MASK, 0, ID_ASSIGNED },
};
void USBD_IRQ_HANDLER(void)
{
rt_interrupt_enter();
HAL_PCD_IRQHandler(&_stm_pcd);
/* leave interrupt */
rt_interrupt_leave();
}
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *pcd)
{
/* open ep0 OUT and IN */
HAL_PCD_EP_Open(pcd, 0x00, 0x40, EP_TYPE_CTRL);
HAL_PCD_EP_Open(pcd, 0x80, 0x40, EP_TYPE_CTRL);
rt_usbd_reset_handler(&_stm_udc);
}
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
{
rt_usbd_ep0_setup_handler(&_stm_udc, (struct urequest *)hpcd->Setup);
}
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
{
if (epnum == 0)
{
rt_usbd_ep0_in_handler(&_stm_udc);
}
else
{
rt_usbd_ep_in_handler(&_stm_udc, 0x80 | epnum, hpcd->IN_ep[epnum].xfer_count);
}
}
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
{
rt_usbd_connect_handler(&_stm_udc);
}
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
{
rt_usbd_sof_handler(&_stm_udc);
}
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
{
rt_usbd_disconnect_handler(&_stm_udc);
}
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
{
if (epnum != 0)
{
rt_usbd_ep_out_handler(&_stm_udc, epnum, hpcd->OUT_ep[epnum].xfer_count);
}
else
{
rt_usbd_ep0_out_handler(&_stm_udc, hpcd->OUT_ep[0].xfer_count);
}
}
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
{
if (state == 1)
{
#if defined(SOC_SERIES_STM32F1)
rt_pin_mode(BSP_USB_CONNECT_PIN,PIN_MODE_OUTPUT);
rt_pin_write(BSP_USB_CONNECT_PIN, BSP_USB_PULL_UP_STATUS);
#endif
}
else
{
#if defined(SOC_SERIES_STM32F1)
rt_pin_mode(BSP_USB_CONNECT_PIN,PIN_MODE_OUTPUT);
rt_pin_write(BSP_USB_CONNECT_PIN, !BSP_USB_PULL_UP_STATUS);
#endif
}
}
static rt_err_t _ep_set_stall(rt_uint8_t address)
{
HAL_PCD_EP_SetStall(&_stm_pcd, address);
return RT_EOK;
}
static rt_err_t _ep_clear_stall(rt_uint8_t address)
{
HAL_PCD_EP_ClrStall(&_stm_pcd, address);
return RT_EOK;
}
static rt_err_t _set_address(rt_uint8_t address)
{
HAL_PCD_SetAddress(&_stm_pcd, address);
return RT_EOK;
}
static rt_err_t _set_config(rt_uint8_t address)
{
return RT_EOK;
}
static rt_err_t _ep_enable(uep_t ep)
{
RT_ASSERT(ep != RT_NULL);
RT_ASSERT(ep->ep_desc != RT_NULL);
HAL_PCD_EP_Open(&_stm_pcd, ep->ep_desc->bEndpointAddress,
ep->ep_desc->wMaxPacketSize, ep->ep_desc->bmAttributes);
return RT_EOK;
}
static rt_err_t _ep_disable(uep_t ep)
{
RT_ASSERT(ep != RT_NULL);
RT_ASSERT(ep->ep_desc != RT_NULL);
HAL_PCD_EP_Close(&_stm_pcd, ep->ep_desc->bEndpointAddress);
return RT_EOK;
}
static rt_size_t _ep_read(rt_uint8_t address, void *buffer)
{
rt_size_t size = 0;
RT_ASSERT(buffer != RT_NULL);
return size;
}
static rt_size_t _ep_read_prepare(rt_uint8_t address, void *buffer, rt_size_t size)
{
HAL_PCD_EP_Receive(&_stm_pcd, address, buffer, size);
return size;
}
static rt_size_t _ep_write(rt_uint8_t address, void *buffer, rt_size_t size)
{
HAL_PCD_EP_Transmit(&_stm_pcd, address, buffer, size);
return size;
}
static rt_err_t _ep0_send_status(void)
{
HAL_PCD_EP_Transmit(&_stm_pcd, 0x00, NULL, 0);
return RT_EOK;
}
static rt_err_t _suspend(void)
{
return RT_EOK;
}
static rt_err_t _wakeup(void)
{
return RT_EOK;
}
static rt_err_t _init(rt_device_t device)
{
PCD_HandleTypeDef *pcd;
/* Set LL Driver parameters */
pcd = (PCD_HandleTypeDef *)device->user_data;
pcd->Instance = USBD_INSTANCE;
memset(&pcd->Init, 0, sizeof pcd->Init);
pcd->Init.dev_endpoints = 8;
pcd->Init.speed = USBD_PCD_SPEED;
pcd->Init.ep0_mps = DEP0CTL_MPS_64;
#if !defined(SOC_SERIES_STM32F1)
pcd->Init.phy_itface = USBD_PCD_PHY_MODULE;
#endif
/* Initialize LL Driver */
HAL_PCD_Init(pcd);
/* USB interrupt Init */
HAL_NVIC_SetPriority(USBD_IRQ_TYPE, 2, 0);
HAL_NVIC_EnableIRQ(USBD_IRQ_TYPE);
#if !defined(SOC_SERIES_STM32F1)
HAL_PCDEx_SetRxFiFo(pcd, 0x80);
HAL_PCDEx_SetTxFiFo(pcd, 0, 0x40);
HAL_PCDEx_SetTxFiFo(pcd, 1, 0x40);
HAL_PCDEx_SetTxFiFo(pcd, 2, 0x40);
HAL_PCDEx_SetTxFiFo(pcd, 3, 0x40);
#else
HAL_PCDEx_PMAConfig(pcd, 0x00, PCD_SNG_BUF, 0x18);
HAL_PCDEx_PMAConfig(pcd, 0x80, PCD_SNG_BUF, 0x58);
HAL_PCDEx_PMAConfig(pcd, 0x81, PCD_SNG_BUF, 0x98);
HAL_PCDEx_PMAConfig(pcd, 0x01, PCD_SNG_BUF, 0x118);
HAL_PCDEx_PMAConfig(pcd, 0x82, PCD_SNG_BUF, 0xD8);
HAL_PCDEx_PMAConfig(pcd, 0x02, PCD_SNG_BUF, 0x158);
HAL_PCDEx_PMAConfig(pcd, 0x83, PCD_SNG_BUF, 0x198);
#endif
HAL_PCD_Start(pcd);
return RT_EOK;
}
const static struct udcd_ops _udc_ops =
{
_set_address,
_set_config,
_ep_set_stall,
_ep_clear_stall,
_ep_enable,
_ep_disable,
_ep_read_prepare,
_ep_read,
_ep_write,
_ep0_send_status,
_suspend,
_wakeup,
};
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops _ops =
{
_init,
RT_NULL,
RT_NULL,
RT_NULL,
RT_NULL,
RT_NULL,
};
#endif
int stm_usbd_register(void)
{
rt_memset((void *)&_stm_udc, 0, sizeof(struct udcd));
_stm_udc.parent.type = RT_Device_Class_USBDevice;
#ifdef RT_USING_DEVICE_OPS
_stm_udc.parent.ops = &_ops;
#else
_stm_udc.parent.init = _init;
#endif
_stm_udc.parent.user_data = &_stm_pcd;
_stm_udc.ops = &_udc_ops;
/* Register endpoint infomation */
_stm_udc.ep_pool = _ep_pool;
_stm_udc.ep0.id = &_ep_pool[0];
#ifdef BSP_USBD_SPEED_HS
_stm_udc.device_is_hs = RT_TRUE;
#endif
rt_device_register((rt_device_t)&_stm_udc, "usbd", 0);
rt_usb_device_init();
return RT_EOK;
}
INIT_DEVICE_EXPORT(stm_usbd_register);
#endif