rt-thread/bsp/stm32f4xx-HAL/drivers/board.c

/*
 * File      : board.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2009, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author       Notes
 * 2009-09-22     Bernard      add board.h to this bsp
 * 2017-12-29     ZYH          Correctly generate the 48M clock
 */

#include <rtthread.h>
#include "board.h"

/**
 * @addtogroup STM32
 */

/*@{*/
#ifdef RT_USING_HSI
    #error Can not using HSI on this bsp
#endif
#if defined(RCC_PERIPHCLK_SDIO) || defined(RCC_PERIPHCLK_CEC) || defined(RCC_PERIPHCLK_LTDC)\
    || defined(RCC_PERIPHCLK_SPDIFRX) || defined(RCC_PERIPHCLK_FMPI2C1) || defined(RCC_PERIPHCLK_LPTIM1)
#warning Please give priority to the correctness of the clock tree when the peripherals are abnormal
#endif
static void SystemClock_Config(void)
{
    rt_uint32_t hse_clk,sys_clk;
#if (RT_HSE_VALVE % 1000000 != 0)
    #error HSE must be integer of MHz
#endif
    hse_clk = HSE_VALUE/1000000UL;
    sys_clk = HCLK_VALUE/1000000UL;
    RCC_OscInitTypeDef RCC_OscInitStruct;
    RCC_ClkInitTypeDef RCC_ClkInitStruct;
#if defined(RT_USING_RTC) || defined(RCC_PERIPHCLK_CLK48)
    RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
#endif
    /**Configure the main internal regulator output voltage 
    */
    __HAL_RCC_PWR_CLK_ENABLE();

    __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

    /**Initializes the CPU, AHB and APB busses clocks 
    */
    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
#ifdef RT_USING_RTC
    RCC_OscInitStruct.OscillatorType |= RCC_OSCILLATORTYPE_LSI;
    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
#endif
    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
    if(hse_clk % 2 == 0)
    {
        RCC_OscInitStruct.PLL.PLLM = hse_clk/2;//Get 2M clock
        if((sys_clk * 2) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk;//Get 2*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;//Get HCLK_VALUE
        }
        else if((sys_clk * 4) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 2;//Get 4*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;//Get HCLK_VALUE
        }
        else if((sys_clk * 6) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 3;//Get 6*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV6;//Get HCLK_VALUE
        }
        else if((sys_clk * 8) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 4;//Get 8*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8;//Get HCLK_VALUE
        }
    }
    else
    {
        RCC_OscInitStruct.PLL.PLLM = hse_clk;//Get 1M clock
        if((sys_clk * 2) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 2;//Get 2*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;//Get HCLK_VALUE
        }
        else if((sys_clk * 4) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 4;//Get 4*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;//Get HCLK_VALUE
        }
        else if((sys_clk * 6) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 6;//Get 6*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV6;//Get HCLK_VALUE
        }
        else if((sys_clk * 8) % 48 == 0)
        {
            RCC_OscInitStruct.PLL.PLLN = sys_clk * 8;//Get 8*HCLK_VALUE
            RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8;//Get HCLK_VALUE
        }
    }
    RCC_OscInitStruct.PLL.PLLQ = hse_clk / RCC_OscInitStruct.PLL.PLLM * RCC_OscInitStruct.PLL.PLLN/48;//Get 48M Clock
    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
    {
        while(1)
        {}
    }

    /**Initializes the CPU, AHB and APB busses clocks 
    */
    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;

#if (RT_HSE_HCLK <= 42000000UL)
    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
    {
        while(1)
        {}
    }
#elif (RT_HSE_HCLK <= 84000000UL)
    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
    {
        while(1)
        {}
    }
#elif (RT_HSE_HCLK <= 168000000UL)
    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
    {
        while(1)
        {}
    }
#else
    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV8;
    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV4;
    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
    {
        while(1)
        {}
    }
#endif
#if defined(RT_USING_RTC) || defined(RCC_PERIPHCLK_CLK48)
    PeriphClkInitStruct.PeriphClockSelection = 0;
    #ifdef RT_USING_RTC
    PeriphClkInitStruct.PeriphClockSelection |= RCC_PERIPHCLK_RTC;
    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
    #endif
    #ifdef RCC_PERIPHCLK_CLK48
    PeriphClkInitStruct.PeriphClockSelection |= RCC_PERIPHCLK_CLK48;
    PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
    #endif
    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
    {
        while(1)
        {}
    }
#endif
}
/**
 * This is the timer interrupt service routine.
 *
 */
void SysTick_Handler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();
    /* tick for HAL Library */
    HAL_IncTick();

    rt_tick_increase();

    /* leave interrupt */
    rt_interrupt_leave();
}

/* re-implementat tick interface for STM32 HAL */
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
    /*Configure the SysTick to have interrupt in 1ms time basis*/
    HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / RT_TICK_PER_SECOND);

    /*Configure the SysTick IRQ priority */
    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority , 0);

    /* Return function status */
    return HAL_OK;
}

void HAL_Delay(__IO uint32_t Delay)
{
    rt_thread_delay(Delay);
}

void HAL_SuspendTick(void)
{
    /* we should not suspend tick */
}

void HAL_ResumeTick(void)
{
    /* we should not resume tick */
}
void HAL_MspInit(void)
{

  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);

  /* System interrupt init*/
  /* MemoryManagement_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
  /* BusFault_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
  /* UsageFault_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
  /* SVCall_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
  /* DebugMonitor_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
  /* PendSV_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
  /* SysTick_IRQn interrupt configuration */
  HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
}

/**
 * This function will initial STM32 board.
 */
void rt_hw_board_init()
{
    
    /* Configure the system clock @ 84 Mhz */
    SystemClock_Config();
	
    HAL_Init();
	
#ifdef RT_USING_HEAP
    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
#endif

#ifdef RT_USING_COMPONENTS_INIT
    rt_components_board_init();
#endif

#ifdef RT_USING_CONSOLE
    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
#endif

}



/*@}*/