2672 lines
100 KiB
C
2672 lines
100 KiB
C
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// gpio.c - API for GPIO ports
|
||
|
|
//
|
||
|
|
// Copyright (c) 2005-2014 Texas Instruments Incorporated. All rights reserved.
|
||
|
|
// Software License Agreement
|
||
|
|
//
|
||
|
|
// Redistribution and use in source and binary forms, with or without
|
||
|
|
// modification, are permitted provided that the following conditions
|
||
|
|
// are met:
|
||
|
|
//
|
||
|
|
// Redistributions of source code must retain the above copyright
|
||
|
|
// notice, this list of conditions and the following disclaimer.
|
||
|
|
//
|
||
|
|
// Redistributions in binary form must reproduce the above copyright
|
||
|
|
// notice, this list of conditions and the following disclaimer in the
|
||
|
|
// documentation and/or other materials provided with the
|
||
|
|
// distribution.
|
||
|
|
//
|
||
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
||
|
|
// its contributors may be used to endorse or promote products derived
|
||
|
|
// from this software without specific prior written permission.
|
||
|
|
//
|
||
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
//
|
||
|
|
// This is part of revision 2.1.0.12573 of the Tiva Peripheral Driver Library.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! \addtogroup gpio_api
|
||
|
|
//! @{
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
|
||
|
|
#include <stdbool.h>
|
||
|
|
#include <stdint.h>
|
||
|
|
#include "inc/hw_gpio.h"
|
||
|
|
#include "inc/hw_ints.h"
|
||
|
|
#include "inc/hw_memmap.h"
|
||
|
|
#include "inc/hw_sysctl.h"
|
||
|
|
#include "inc/hw_types.h"
|
||
|
|
#include "driverlib/debug.h"
|
||
|
|
#include "driverlib/gpio.h"
|
||
|
|
#include "driverlib/interrupt.h"
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// A mapping of GPIO port address to interrupt number.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
static const uint32_t g_ppui32GPIOIntMapBlizzard[][2] =
|
||
|
|
{
|
||
|
|
{ GPIO_PORTA_BASE, INT_GPIOA_TM4C123 },
|
||
|
|
{ GPIO_PORTA_AHB_BASE, INT_GPIOA_TM4C123 },
|
||
|
|
{ GPIO_PORTB_BASE, INT_GPIOB_TM4C123 },
|
||
|
|
{ GPIO_PORTB_AHB_BASE, INT_GPIOB_TM4C123 },
|
||
|
|
{ GPIO_PORTC_BASE, INT_GPIOC_TM4C123 },
|
||
|
|
{ GPIO_PORTC_AHB_BASE, INT_GPIOC_TM4C123 },
|
||
|
|
{ GPIO_PORTD_BASE, INT_GPIOD_TM4C123 },
|
||
|
|
{ GPIO_PORTD_AHB_BASE, INT_GPIOD_TM4C123 },
|
||
|
|
{ GPIO_PORTE_BASE, INT_GPIOE_TM4C123 },
|
||
|
|
{ GPIO_PORTE_AHB_BASE, INT_GPIOE_TM4C123 },
|
||
|
|
{ GPIO_PORTF_BASE, INT_GPIOF_TM4C123 },
|
||
|
|
{ GPIO_PORTF_AHB_BASE, INT_GPIOF_TM4C123 },
|
||
|
|
{ GPIO_PORTG_BASE, INT_GPIOG_TM4C123 },
|
||
|
|
{ GPIO_PORTG_AHB_BASE, INT_GPIOG_TM4C123 },
|
||
|
|
{ GPIO_PORTH_BASE, INT_GPIOH_TM4C123 },
|
||
|
|
{ GPIO_PORTH_AHB_BASE, INT_GPIOH_TM4C123 },
|
||
|
|
{ GPIO_PORTJ_BASE, INT_GPIOJ_TM4C123 },
|
||
|
|
{ GPIO_PORTJ_AHB_BASE, INT_GPIOJ_TM4C123 },
|
||
|
|
{ GPIO_PORTK_BASE, INT_GPIOK_TM4C123 },
|
||
|
|
{ GPIO_PORTL_BASE, INT_GPIOL_TM4C123 },
|
||
|
|
{ GPIO_PORTM_BASE, INT_GPIOM_TM4C123 },
|
||
|
|
{ GPIO_PORTN_BASE, INT_GPION_TM4C123 },
|
||
|
|
{ GPIO_PORTP_BASE, INT_GPIOP0_TM4C123 },
|
||
|
|
{ GPIO_PORTQ_BASE, INT_GPIOQ0_TM4C123 },
|
||
|
|
};
|
||
|
|
static const uint_fast32_t g_ui32GPIOIntMapBlizzardRows =
|
||
|
|
sizeof(g_ppui32GPIOIntMapBlizzard) / sizeof(g_ppui32GPIOIntMapBlizzard[0]);
|
||
|
|
|
||
|
|
static const uint32_t g_ppui32GPIOIntMapSnowflake[][2] =
|
||
|
|
{
|
||
|
|
{ GPIO_PORTA_BASE, INT_GPIOA_TM4C129 },
|
||
|
|
{ GPIO_PORTA_AHB_BASE, INT_GPIOA_TM4C129 },
|
||
|
|
{ GPIO_PORTB_BASE, INT_GPIOB_TM4C129 },
|
||
|
|
{ GPIO_PORTB_AHB_BASE, INT_GPIOB_TM4C129 },
|
||
|
|
{ GPIO_PORTC_BASE, INT_GPIOC_TM4C129 },
|
||
|
|
{ GPIO_PORTC_AHB_BASE, INT_GPIOC_TM4C129 },
|
||
|
|
{ GPIO_PORTD_BASE, INT_GPIOD_TM4C129 },
|
||
|
|
{ GPIO_PORTD_AHB_BASE, INT_GPIOD_TM4C129 },
|
||
|
|
{ GPIO_PORTE_BASE, INT_GPIOE_TM4C129 },
|
||
|
|
{ GPIO_PORTE_AHB_BASE, INT_GPIOE_TM4C129 },
|
||
|
|
{ GPIO_PORTF_BASE, INT_GPIOF_TM4C129 },
|
||
|
|
{ GPIO_PORTF_AHB_BASE, INT_GPIOF_TM4C129 },
|
||
|
|
{ GPIO_PORTG_BASE, INT_GPIOG_TM4C129 },
|
||
|
|
{ GPIO_PORTG_AHB_BASE, INT_GPIOG_TM4C129 },
|
||
|
|
{ GPIO_PORTH_BASE, INT_GPIOH_TM4C129 },
|
||
|
|
{ GPIO_PORTH_AHB_BASE, INT_GPIOH_TM4C129 },
|
||
|
|
{ GPIO_PORTJ_BASE, INT_GPIOJ_TM4C129 },
|
||
|
|
{ GPIO_PORTJ_AHB_BASE, INT_GPIOJ_TM4C129 },
|
||
|
|
{ GPIO_PORTK_BASE, INT_GPIOK_TM4C129 },
|
||
|
|
{ GPIO_PORTL_BASE, INT_GPIOL_TM4C129 },
|
||
|
|
{ GPIO_PORTM_BASE, INT_GPIOM_TM4C129 },
|
||
|
|
{ GPIO_PORTN_BASE, INT_GPION_TM4C129 },
|
||
|
|
{ GPIO_PORTP_BASE, INT_GPIOP0_TM4C129 },
|
||
|
|
{ GPIO_PORTQ_BASE, INT_GPIOQ0_TM4C129 },
|
||
|
|
};
|
||
|
|
static const uint_fast32_t g_ui32GPIOIntMapSnowflakeRows =
|
||
|
|
(sizeof(g_ppui32GPIOIntMapSnowflake) /
|
||
|
|
sizeof(g_ppui32GPIOIntMapSnowflake[0]));
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// The base addresses of all the GPIO modules. Both the APB and AHB apertures
|
||
|
|
// are provided.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
static const uint32_t g_pui32GPIOBaseAddrs[] =
|
||
|
|
{
|
||
|
|
GPIO_PORTA_BASE, GPIO_PORTA_AHB_BASE,
|
||
|
|
GPIO_PORTB_BASE, GPIO_PORTB_AHB_BASE,
|
||
|
|
GPIO_PORTC_BASE, GPIO_PORTC_AHB_BASE,
|
||
|
|
GPIO_PORTD_BASE, GPIO_PORTD_AHB_BASE,
|
||
|
|
GPIO_PORTE_BASE, GPIO_PORTE_AHB_BASE,
|
||
|
|
GPIO_PORTF_BASE, GPIO_PORTF_AHB_BASE,
|
||
|
|
GPIO_PORTG_BASE, GPIO_PORTG_AHB_BASE,
|
||
|
|
GPIO_PORTH_BASE, GPIO_PORTH_AHB_BASE,
|
||
|
|
GPIO_PORTJ_BASE, GPIO_PORTJ_AHB_BASE,
|
||
|
|
GPIO_PORTK_BASE, GPIO_PORTK_BASE,
|
||
|
|
GPIO_PORTL_BASE, GPIO_PORTL_BASE,
|
||
|
|
GPIO_PORTM_BASE, GPIO_PORTM_BASE,
|
||
|
|
GPIO_PORTN_BASE, GPIO_PORTN_BASE,
|
||
|
|
GPIO_PORTP_BASE, GPIO_PORTP_BASE,
|
||
|
|
GPIO_PORTQ_BASE, GPIO_PORTQ_BASE,
|
||
|
|
GPIO_PORTR_BASE, GPIO_PORTR_BASE,
|
||
|
|
GPIO_PORTS_BASE, GPIO_PORTS_BASE,
|
||
|
|
GPIO_PORTT_BASE, GPIO_PORTT_BASE,
|
||
|
|
};
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! \internal
|
||
|
|
//! Checks a GPIO base address.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//!
|
||
|
|
//! This function determines if a GPIO port base address is valid.
|
||
|
|
//!
|
||
|
|
//! \return Returns \b true if the base address is valid and \b false
|
||
|
|
//! otherwise.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
#ifdef DEBUG
|
||
|
|
static bool
|
||
|
|
_GPIOBaseValid(uint32_t ui32Port)
|
||
|
|
{
|
||
|
|
return((ui32Port == GPIO_PORTA_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTA_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTB_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTC_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTC_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTD_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTD_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTE_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTE_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTF_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTF_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTG_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTG_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTH_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTH_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTJ_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTJ_AHB_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTK_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTL_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTM_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTN_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTP_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTQ_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTR_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTS_BASE) ||
|
||
|
|
(ui32Port == GPIO_PORTT_BASE));
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Gets the GPIO interrupt number.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//!
|
||
|
|
//! Given a GPIO base address, this function returns the corresponding
|
||
|
|
//! interrupt number.
|
||
|
|
//!
|
||
|
|
//! \return Returns a GPIO interrupt number, or 0 if \e ui32Port is invalid.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
static uint32_t
|
||
|
|
_GPIOIntNumberGet(uint32_t ui32Port)
|
||
|
|
{
|
||
|
|
uint_fast32_t ui32Idx, ui32Rows;
|
||
|
|
const uint32_t (*ppui32GPIOIntMap)[2];
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
ppui32GPIOIntMap = g_ppui32GPIOIntMapBlizzard;
|
||
|
|
ui32Rows = g_ui32GPIOIntMapBlizzardRows;
|
||
|
|
|
||
|
|
if(CLASS_IS_TM4C129)
|
||
|
|
{
|
||
|
|
ppui32GPIOIntMap = g_ppui32GPIOIntMapSnowflake;
|
||
|
|
ui32Rows = g_ui32GPIOIntMapSnowflakeRows;
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Loop through the table that maps I2C base addresses to interrupt
|
||
|
|
// numbers.
|
||
|
|
//
|
||
|
|
for(ui32Idx = 0; ui32Idx < ui32Rows; ui32Idx++)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// See if this base address matches.
|
||
|
|
//
|
||
|
|
if(ppui32GPIOIntMap[ui32Idx][0] == ui32Port)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Return the corresponding interrupt number.
|
||
|
|
//
|
||
|
|
return(ppui32GPIOIntMap[ui32Idx][1]);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// The base address could not be found, so return an error.
|
||
|
|
//
|
||
|
|
return(0);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Sets the direction and mode of the specified pin(s).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//! \param ui32PinIO is the pin direction and/or mode.
|
||
|
|
//!
|
||
|
|
//! This function configures the specified pin(s) on the selected GPIO port
|
||
|
|
//! as either input or output under software control, or it configures the
|
||
|
|
//! pin to be under hardware control.
|
||
|
|
//!
|
||
|
|
//! The parameter \e ui32PinIO is an enumerated data type that can be one of
|
||
|
|
//! the following values:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_DIR_MODE_IN
|
||
|
|
//! - \b GPIO_DIR_MODE_OUT
|
||
|
|
//! - \b GPIO_DIR_MODE_HW
|
||
|
|
//!
|
||
|
|
//! where \b GPIO_DIR_MODE_IN specifies that the pin is programmed as a
|
||
|
|
//! software controlled input, \b GPIO_DIR_MODE_OUT specifies that the pin is
|
||
|
|
//! programmed as a software controlled output, and \b GPIO_DIR_MODE_HW
|
||
|
|
//! specifies that the pin is placed under hardware control.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note GPIOPadConfigSet() must also be used to configure the corresponding
|
||
|
|
//! pad(s) in order for them to propagate the signal to/from the GPIO.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIODirModeSet(uint32_t ui32Port, uint8_t ui8Pins, uint32_t ui32PinIO)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT((ui32PinIO == GPIO_DIR_MODE_IN) ||
|
||
|
|
(ui32PinIO == GPIO_DIR_MODE_OUT) ||
|
||
|
|
(ui32PinIO == GPIO_DIR_MODE_HW));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin direction and mode.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_DIR) = ((ui32PinIO & 1) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DIR) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DIR) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_AFSEL) = ((ui32PinIO & 2) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_AFSEL) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_AFSEL) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Gets the direction and mode of a pin.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pin is the pin number.
|
||
|
|
//!
|
||
|
|
//! This function gets the direction and control mode for a specified pin on
|
||
|
|
//! the selected GPIO port. The pin can be configured as either an input or
|
||
|
|
//! output under software control, or it can be under hardware control. The
|
||
|
|
//! type of control and direction are returned as an enumerated data type.
|
||
|
|
//!
|
||
|
|
//! \return Returns one of the enumerated data types described for
|
||
|
|
//! GPIODirModeSet().
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
GPIODirModeGet(uint32_t ui32Port, uint8_t ui8Pin)
|
||
|
|
{
|
||
|
|
uint32_t ui32Dir, ui32AFSEL;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT(ui8Pin < 8);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Convert from a pin number to a bit position.
|
||
|
|
//
|
||
|
|
ui8Pin = 1 << ui8Pin;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Return the pin direction and mode.
|
||
|
|
//
|
||
|
|
ui32Dir = HWREG(ui32Port + GPIO_O_DIR);
|
||
|
|
ui32AFSEL = HWREG(ui32Port + GPIO_O_AFSEL);
|
||
|
|
return(((ui32Dir & ui8Pin) ? 1 : 0) | ((ui32AFSEL & ui8Pin) ? 2 : 0));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Sets the interrupt type for the specified pin(s).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//! \param ui32IntType specifies the type of interrupt trigger mechanism.
|
||
|
|
//!
|
||
|
|
//! This function sets up the various interrupt trigger mechanisms for the
|
||
|
|
//! specified pin(s) on the selected GPIO port.
|
||
|
|
//!
|
||
|
|
//! One of the following flags can be used to define the \e ui32IntType
|
||
|
|
//! parameter:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_FALLING_EDGE sets detection to edge and trigger to falling
|
||
|
|
//! - \b GPIO_RISING_EDGE sets detection to edge and trigger to rising
|
||
|
|
//! - \b GPIO_BOTH_EDGES sets detection to both edges
|
||
|
|
//! - \b GPIO_LOW_LEVEL sets detection to low level
|
||
|
|
//! - \b GPIO_HIGH_LEVEL sets detection to high level
|
||
|
|
//!
|
||
|
|
//! In addition to the above flags, the following flag can be OR'd in to the
|
||
|
|
//! \e ui32IntType parameter:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_DISCRETE_INT sets discrete interrupts for each pin on a GPIO
|
||
|
|
//! port.
|
||
|
|
//!
|
||
|
|
//! The \b GPIO_DISCRETE_INT is not available on all devices or all GPIO ports,
|
||
|
|
//! consult the data sheet to ensure that the device and the GPIO port supports
|
||
|
|
//! discrete interrupts.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note In order to avoid any spurious interrupts, the user must ensure that
|
||
|
|
//! the GPIO inputs remain stable for the duration of this function.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntTypeSet(uint32_t ui32Port, uint8_t ui8Pins,
|
||
|
|
uint32_t ui32IntType)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT((ui32IntType == GPIO_FALLING_EDGE) ||
|
||
|
|
(ui32IntType == GPIO_RISING_EDGE) ||
|
||
|
|
(ui32IntType == GPIO_BOTH_EDGES) ||
|
||
|
|
(ui32IntType == GPIO_LOW_LEVEL) ||
|
||
|
|
(ui32IntType == GPIO_HIGH_LEVEL));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin interrupt type.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_IBE) = ((ui32IntType & 1) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_IBE) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_IBE) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_IS) = ((ui32IntType & 2) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_IS) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_IS) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_IEV) = ((ui32IntType & 4) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_IEV) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_IEV) & ~(ui8Pins)));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set or clear the discrete interrupt feature. This is not available
|
||
|
|
// on all parts or ports but is safe to write in all cases.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_SI) = ((ui32IntType & 0x10000) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_SI) | 0x01) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_SI) & ~(0x01)));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Gets the interrupt type for a pin.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pin is the pin number.
|
||
|
|
//!
|
||
|
|
//! This function gets the interrupt type for a specified pin on the selected
|
||
|
|
//! GPIO port. The pin can be configured as a falling-edge, rising-edge, or
|
||
|
|
//! both-edges detected interrupt, or it can be configured as a low-level or
|
||
|
|
//! high-level detected interrupt. The type of interrupt detection mechanism
|
||
|
|
//! is returned and can include the \b GPIO_DISCRETE_INT flag.
|
||
|
|
//!
|
||
|
|
//! \return Returns one of the flags described for GPIOIntTypeSet().
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
GPIOIntTypeGet(uint32_t ui32Port, uint8_t ui8Pin)
|
||
|
|
{
|
||
|
|
uint32_t ui32IBE, ui32IS, ui32IEV, ui32SI;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT(ui8Pin < 8);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Convert from a pin number to a bit position.
|
||
|
|
//
|
||
|
|
ui8Pin = 1 << ui8Pin;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Return the pin interrupt type.
|
||
|
|
//
|
||
|
|
ui32IBE = HWREG(ui32Port + GPIO_O_IBE);
|
||
|
|
ui32IS = HWREG(ui32Port + GPIO_O_IS);
|
||
|
|
ui32IEV = HWREG(ui32Port + GPIO_O_IEV);
|
||
|
|
ui32SI = HWREG(ui32Port + GPIO_O_SI);
|
||
|
|
return(((ui32IBE & ui8Pin) ? 1 : 0) | ((ui32IS & ui8Pin) ? 2 : 0) |
|
||
|
|
((ui32IEV & ui8Pin) ? 4 : 0) | (ui32SI & 0x01) ? 0x10000 : 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Sets the pad configuration for the specified pin(s).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//! \param ui32Strength specifies the output drive strength.
|
||
|
|
//! \param ui32PinType specifies the pin type.
|
||
|
|
//!
|
||
|
|
//! This function sets the drive strength and type for the specified pin(s)
|
||
|
|
//! on the selected GPIO port. For pin(s) configured as input ports, the
|
||
|
|
//! pad is configured as requested, but the only real effect on the input
|
||
|
|
//! is the configuration of the pull-up or pull-down termination.
|
||
|
|
//!
|
||
|
|
//! The parameter \e ui32Strength can be one of the following values:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_STRENGTH_2MA
|
||
|
|
//! - \b GPIO_STRENGTH_4MA
|
||
|
|
//! - \b GPIO_STRENGTH_8MA
|
||
|
|
//! - \b GPIO_STRENGTH_8MA_SC
|
||
|
|
//! - \b GPIO_STRENGTH_6MA
|
||
|
|
//! - \b GPIO_STRENGTH_10MA
|
||
|
|
//! - \b GPIO_STRENGTH_12MA
|
||
|
|
//!
|
||
|
|
//! where \b GPIO_STRENGTH_xMA specifies either 2, 4, or 8 mA output drive
|
||
|
|
//! strength, and \b GPIO_OUT_STRENGTH_8MA_SC specifies 8 mA output drive with
|
||
|
|
//! slew control.
|
||
|
|
//!
|
||
|
|
//! Some Tiva devices also support output drive strengths of 6, 10, and 12
|
||
|
|
//! mA.
|
||
|
|
//!
|
||
|
|
//! The parameter \e ui32PinType can be one of the following values:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_PIN_TYPE_STD
|
||
|
|
//! - \b GPIO_PIN_TYPE_STD_WPU
|
||
|
|
//! - \b GPIO_PIN_TYPE_STD_WPD
|
||
|
|
//! - \b GPIO_PIN_TYPE_OD
|
||
|
|
//! - \b GPIO_PIN_TYPE_ANALOG
|
||
|
|
//! - \b GPIO_PIN_TYPE_WAKE_HIGH
|
||
|
|
//! - \b GPIO_PIN_TYPE_WAKE_LOW
|
||
|
|
//!
|
||
|
|
//! where \b GPIO_PIN_TYPE_STD* specifies a push-pull pin, \b GPIO_PIN_TYPE_OD*
|
||
|
|
//! specifies an open-drain pin, \b *_WPU specifies a weak pull-up, \b *_WPD
|
||
|
|
//! specifies a weak pull-down, and \b GPIO_PIN_TYPE_ANALOG specifies an analog
|
||
|
|
//! input.
|
||
|
|
//!
|
||
|
|
//! The \b GPIO_PIN_TYPE_WAKE_* settings specify the pin to be used as a
|
||
|
|
//! hibernation wake source. The pin sense level can be high or low. These
|
||
|
|
//! settings are only available on some Tiva devices.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPadConfigSet(uint32_t ui32Port, uint8_t ui8Pins,
|
||
|
|
uint32_t ui32Strength, uint32_t ui32PinType)
|
||
|
|
{
|
||
|
|
uint8_t ui8Bit;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT((ui32Strength == GPIO_STRENGTH_2MA) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_4MA) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_6MA) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_8MA) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_8MA_SC) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_10MA) ||
|
||
|
|
(ui32Strength == GPIO_STRENGTH_12MA));
|
||
|
|
ASSERT((ui32PinType == GPIO_PIN_TYPE_STD) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_STD_WPU) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_STD_WPD) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_OD) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_WAKE_LOW) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_WAKE_HIGH) ||
|
||
|
|
(ui32PinType == GPIO_PIN_TYPE_ANALOG));
|
||
|
|
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the GPIO peripheral configuration register first as required. This
|
||
|
|
// register only appears in TM4E111 and later device classes, but is a
|
||
|
|
// harmless write on older devices. Walk pins 0-7 and clear or set the
|
||
|
|
// provided PC[EDMn] encoding.
|
||
|
|
//
|
||
|
|
for(ui8Bit = 0; ui8Bit < 8; ui8Bit++)
|
||
|
|
{
|
||
|
|
if(ui8Pins & (1 << ui8Bit))
|
||
|
|
{
|
||
|
|
HWREG(ui32Port + GPIO_O_PC) = (HWREG(ui32Port + GPIO_O_PC) &
|
||
|
|
~(0x3 << (2 * ui8Bit)));
|
||
|
|
HWREG(ui32Port + GPIO_O_PC) |= (((ui32Strength >> 5) & 0x3) <<
|
||
|
|
(2 * ui8Bit));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the output drive strength.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_DR2R) = ((ui32Strength & 1) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR2R) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR2R) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_DR4R) = ((ui32Strength & 2) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR4R) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR4R) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_DR8R) = ((ui32Strength & 4) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR8R) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR8R) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_SLR) = ((ui32Strength & 8) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_SLR) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_SLR) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the 12-mA drive select register. This register only appears in
|
||
|
|
// TM4E111 and later device classes, but is a harmless write on older
|
||
|
|
// devices.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_DR12R) = ((ui32Strength & 0x10) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR12R) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DR12R) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin type.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_ODR) = ((ui32PinType & 1) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_ODR) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_ODR) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_PUR) = ((ui32PinType & 2) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_PUR) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_PUR) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_PDR) = ((ui32PinType & 4) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_PDR) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_PDR) & ~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_DEN) = ((ui32PinType & 8) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_DEN) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_DEN) & ~(ui8Pins)));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the wake pin enable register and the wake level register. These
|
||
|
|
// registers only appear in TM4E111 and later device classes, but are
|
||
|
|
// harmless writes on older devices.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_WAKELVL) = ((ui32PinType & 0x200) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_WAKELVL) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_WAKELVL) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
HWREG(ui32Port + GPIO_O_WAKEPEN) = ((ui32PinType & 0x300) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_WAKEPEN) |
|
||
|
|
ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_WAKEPEN) &
|
||
|
|
~(ui8Pins)));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the analog mode select register.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_AMSEL) =
|
||
|
|
((ui32PinType == GPIO_PIN_TYPE_ANALOG) ?
|
||
|
|
(HWREG(ui32Port + GPIO_O_AMSEL) | ui8Pins) :
|
||
|
|
(HWREG(ui32Port + GPIO_O_AMSEL) & ~(ui8Pins)));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Gets the pad configuration for a pin.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pin is the pin number.
|
||
|
|
//! \param pui32Strength is a pointer to storage for the output drive strength.
|
||
|
|
//! \param pui32PinType is a pointer to storage for the output drive type.
|
||
|
|
//!
|
||
|
|
//! This function gets the pad configuration for a specified pin on the
|
||
|
|
//! selected GPIO port. The values returned in \e pui32Strength and
|
||
|
|
//! \e pui32PinType correspond to the values used in GPIOPadConfigSet(). This
|
||
|
|
//! function also works for pin(s) configured as input pin(s); however, the
|
||
|
|
//! only meaningful data returned is whether the pin is terminated with a
|
||
|
|
//! pull-up or down resistor.
|
||
|
|
//!
|
||
|
|
//! \return None
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPadConfigGet(uint32_t ui32Port, uint8_t ui8Pin,
|
||
|
|
uint32_t *pui32Strength, uint32_t *pui32PinType)
|
||
|
|
{
|
||
|
|
uint32_t ui32PinType, ui32Strength;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
ASSERT(ui8Pin < 8);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Convert from a pin number to a bit position.
|
||
|
|
//
|
||
|
|
ui8Pin = (1 << ui8Pin);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get the drive strength for this pin.
|
||
|
|
//
|
||
|
|
ui32Strength = ((HWREG(ui32Port + GPIO_O_DR2R) & ui8Pin) ? 1 : 0);
|
||
|
|
ui32Strength |= ((HWREG(ui32Port + GPIO_O_DR4R) & ui8Pin) ? 2 : 0);
|
||
|
|
ui32Strength |= ((HWREG(ui32Port + GPIO_O_DR8R) & ui8Pin) ? 4 : 0);
|
||
|
|
ui32Strength |= ((HWREG(ui32Port + GPIO_O_SLR) & ui8Pin) ? 8 : 0);
|
||
|
|
ui32Strength |= ((HWREG(ui32Port + GPIO_O_DR12R) & ui8Pin) ? 0x10 : 0);
|
||
|
|
ui32Strength |= (((HWREG(ui32Port + GPIO_O_PC) >>
|
||
|
|
(2 * ui8Pin)) & 0x3) << 5);
|
||
|
|
*pui32Strength = ui32Strength;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get the pin type.
|
||
|
|
//
|
||
|
|
ui32PinType = ((HWREG(ui32Port + GPIO_O_ODR) & ui8Pin) ? 1 : 0);
|
||
|
|
ui32PinType |= ((HWREG(ui32Port + GPIO_O_PUR) & ui8Pin) ? 2 : 0);
|
||
|
|
ui32PinType |= ((HWREG(ui32Port + GPIO_O_PDR) & ui8Pin) ? 4 : 0);
|
||
|
|
ui32PinType |= ((HWREG(ui32Port + GPIO_O_DEN) & ui8Pin) ? 8 : 0);
|
||
|
|
if(HWREG(ui32Port + GPIO_O_WAKEPEN) & ui8Pin)
|
||
|
|
{
|
||
|
|
ui32PinType |= ((HWREG(ui32Port + GPIO_O_WAKELVL) & ui8Pin) ?
|
||
|
|
0x200 : 0x100);
|
||
|
|
}
|
||
|
|
*pui32PinType = ui32PinType;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Enables the specified GPIO interrupts.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to enable.
|
||
|
|
//!
|
||
|
|
//! This function enables the indicated GPIO interrupt sources. Only the
|
||
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
||
|
|
//! disabled sources have no effect on the processor.
|
||
|
|
//!
|
||
|
|
//! The \e ui32IntFlags parameter is the logical OR of any of the following:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_INT_PIN_0 - interrupt due to activity on Pin 0.
|
||
|
|
//! - \b GPIO_INT_PIN_1 - interrupt due to activity on Pin 1.
|
||
|
|
//! - \b GPIO_INT_PIN_2 - interrupt due to activity on Pin 2.
|
||
|
|
//! - \b GPIO_INT_PIN_3 - interrupt due to activity on Pin 3.
|
||
|
|
//! - \b GPIO_INT_PIN_4 - interrupt due to activity on Pin 4.
|
||
|
|
//! - \b GPIO_INT_PIN_5 - interrupt due to activity on Pin 5.
|
||
|
|
//! - \b GPIO_INT_PIN_6 - interrupt due to activity on Pin 6.
|
||
|
|
//! - \b GPIO_INT_PIN_7 - interrupt due to activity on Pin 7.
|
||
|
|
//! - \b GPIO_INT_DMA - interrupt due to DMA activity on this GPIO module.
|
||
|
|
//!
|
||
|
|
//! \note If this call is being used to enable summary interrupts on GPIO port
|
||
|
|
//! P or Q (GPIOIntTypeSet() with GPIO_DISCRETE_INT not enabled), then all
|
||
|
|
//! individual interrupts for these ports must be enabled in the GPIO module
|
||
|
|
//! using GPIOIntEnable() and all but the interrupt for pin 0 must be disabled
|
||
|
|
//! in the NVIC using the IntDisable() function. The summary interrupts for
|
||
|
|
//! the ports are routed to the INT_GPIOP0 or INT_GPIOQ0 which must be enabled
|
||
|
|
//! to handle the interrupt. If this is not done then any individual GPIO pin
|
||
|
|
//! interrupts that are left enabled also trigger the individual interrupts.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntEnable(uint32_t ui32Port, uint32_t ui32IntFlags)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Enable the interrupts.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_IM) |= ui32IntFlags;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Disables the specified GPIO interrupts.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to disable.
|
||
|
|
//!
|
||
|
|
//! This function disables the indicated GPIO interrupt sources. Only the
|
||
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
||
|
|
//! disabled sources have no effect on the processor.
|
||
|
|
//!
|
||
|
|
//! The \e ui32IntFlags parameter is the logical OR of any of the following:
|
||
|
|
//!
|
||
|
|
//! - \b GPIO_INT_PIN_0 - interrupt due to activity on Pin 0.
|
||
|
|
//! - \b GPIO_INT_PIN_1 - interrupt due to activity on Pin 1.
|
||
|
|
//! - \b GPIO_INT_PIN_2 - interrupt due to activity on Pin 2.
|
||
|
|
//! - \b GPIO_INT_PIN_3 - interrupt due to activity on Pin 3.
|
||
|
|
//! - \b GPIO_INT_PIN_4 - interrupt due to activity on Pin 4.
|
||
|
|
//! - \b GPIO_INT_PIN_5 - interrupt due to activity on Pin 5.
|
||
|
|
//! - \b GPIO_INT_PIN_6 - interrupt due to activity on Pin 6.
|
||
|
|
//! - \b GPIO_INT_PIN_7 - interrupt due to activity on Pin 7.
|
||
|
|
//! - \b GPIO_INT_DMA - interrupt due to DMA activity on this GPIO module.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntDisable(uint32_t ui32Port, uint32_t ui32IntFlags)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Disable the interrupts.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_IM) &= ~(ui32IntFlags);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Gets interrupt status for the specified GPIO port.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param bMasked specifies whether masked or raw interrupt status is
|
||
|
|
//! returned.
|
||
|
|
//!
|
||
|
|
//! If \e bMasked is set as \b true, then the masked interrupt status is
|
||
|
|
//! returned; otherwise, the raw interrupt status is returned.
|
||
|
|
//!
|
||
|
|
//! \return Returns the current interrupt status for the specified GPIO module.
|
||
|
|
//! The value returned is the logical OR of the \b GPIO_INT_* values that are
|
||
|
|
//! currently active.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
GPIOIntStatus(uint32_t ui32Port, bool bMasked)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Return the interrupt status.
|
||
|
|
//
|
||
|
|
if(bMasked)
|
||
|
|
{
|
||
|
|
return(HWREG(ui32Port + GPIO_O_MIS));
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
return(HWREG(ui32Port + GPIO_O_RIS));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Clears the specified interrupt sources.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to disable.
|
||
|
|
//!
|
||
|
|
//! Clears the interrupt for the specified interrupt source(s).
|
||
|
|
//!
|
||
|
|
//! The \e ui32IntFlags parameter is the logical OR of the \b GPIO_INT_*
|
||
|
|
//! values.
|
||
|
|
//!
|
||
|
|
//! \note Because there is a write buffer in the Cortex-M processor, it may
|
||
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
||
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
||
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
||
|
|
//! returning from the interrupt handler before the interrupt source is
|
||
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
||
|
|
//! being immediately reentered (because the interrupt controller still sees
|
||
|
|
//! the interrupt source asserted).
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntClear(uint32_t ui32Port, uint32_t ui32IntFlags)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Clear the interrupts.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_ICR) = ui32IntFlags;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Registers an interrupt handler for a GPIO port.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param pfnIntHandler is a pointer to the GPIO port interrupt handling
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! This function ensures that the interrupt handler specified by
|
||
|
|
//! \e pfnIntHandler is called when an interrupt is detected from the selected
|
||
|
|
//! GPIO port. This function also enables the corresponding GPIO interrupt
|
||
|
|
//! in the interrupt controller; individual pin interrupts and interrupt
|
||
|
|
//! sources must be enabled with GPIOIntEnable().
|
||
|
|
//!
|
||
|
|
//! \sa IntRegister() for important information about registering interrupt
|
||
|
|
//! handlers.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntRegister(uint32_t ui32Port, void (*pfnIntHandler)(void))
|
||
|
|
{
|
||
|
|
uint32_t ui32Int;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get the interrupt number associated with the specified GPIO.
|
||
|
|
//
|
||
|
|
ui32Int = _GPIOIntNumberGet(ui32Port);
|
||
|
|
|
||
|
|
ASSERT(ui32Int != 0);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Register the interrupt handler.
|
||
|
|
//
|
||
|
|
IntRegister(ui32Int, pfnIntHandler);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Enable the GPIO interrupt.
|
||
|
|
//
|
||
|
|
IntEnable(ui32Int);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Removes an interrupt handler for a GPIO port.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//!
|
||
|
|
//! This function unregisters the interrupt handler for the specified
|
||
|
|
//! GPIO port. This function also disables the corresponding
|
||
|
|
//! GPIO port interrupt in the interrupt controller; individual GPIO interrupts
|
||
|
|
//! and interrupt sources must be disabled with GPIOIntDisable().
|
||
|
|
//!
|
||
|
|
//! \sa IntRegister() for important information about registering interrupt
|
||
|
|
//! handlers.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOIntUnregister(uint32_t ui32Port)
|
||
|
|
{
|
||
|
|
uint32_t ui32Int;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get the interrupt number associated with the specified GPIO.
|
||
|
|
//
|
||
|
|
ui32Int = _GPIOIntNumberGet(ui32Port);
|
||
|
|
|
||
|
|
ASSERT(ui32Int != 0);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Disable the GPIO interrupt.
|
||
|
|
//
|
||
|
|
IntDisable(ui32Int);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Unregister the interrupt handler.
|
||
|
|
//
|
||
|
|
IntUnregister(ui32Int);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Reads the values present of the specified pin(s).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The values at the specified pin(s) are read, as specified by \e ui8Pins.
|
||
|
|
//! Values are returned for both input and output pin(s), and the value
|
||
|
|
//! for pin(s) that are not specified by \e ui8Pins are set to 0.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \return Returns a bit-packed byte providing the state of the specified
|
||
|
|
//! pin, where bit 0 of the byte represents GPIO port pin 0, bit 1 represents
|
||
|
|
//! GPIO port pin 1, and so on. Any bit that is not specified by \e ui8Pins
|
||
|
|
//! is returned as a 0. Bits 31:8 should be ignored.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
int32_t
|
||
|
|
GPIOPinRead(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Return the pin value(s).
|
||
|
|
//
|
||
|
|
return(HWREG(ui32Port + (GPIO_O_DATA + (ui8Pins << 2))));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Writes a value to the specified pin(s).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//! \param ui8Val is the value to write to the pin(s).
|
||
|
|
//!
|
||
|
|
//! Writes the corresponding bit values to the output pin(s) specified by
|
||
|
|
//! \e ui8Pins. Writing to a pin configured as an input pin has no effect.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinWrite(uint32_t ui32Port, uint8_t ui8Pins, uint8_t ui8Val)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Write the pins.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + (GPIO_O_DATA + (ui8Pins << 2))) = ui8Val;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as analog-to-digital converter inputs.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The analog-to-digital converter input pins must be properly configured for
|
||
|
|
//! the analog-to-digital peripheral to function correctly. This function
|
||
|
|
//! provides the proper configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an ADC input; it
|
||
|
|
//! only configures an ADC input pin for proper operation.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeADC(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for analog operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_ANALOG);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as a CAN device.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The CAN pins must be properly configured for the CAN peripherals to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! those pin(s); other configurations may work as well depending upon the
|
||
|
|
//! board setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a CAN pin; it only
|
||
|
|
//! configures a CAN pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the CAN
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeCAN(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as an analog comparator input.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The analog comparator input pins must be properly configured for the analog
|
||
|
|
//! comparator to function correctly. This function provides the proper
|
||
|
|
//! configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an analog
|
||
|
|
//! comparator input; it only configures an analog comparator pin for proper
|
||
|
|
//! operation. Note that a GPIOPinConfigure() function call is also required
|
||
|
|
//! to properly configure a pin for the analog comparator function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeComparator(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for analog operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_ANALOG);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the external peripheral interface.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The external peripheral interface pins must be properly configured for the
|
||
|
|
//! external peripheral interface to function correctly. This function
|
||
|
|
//! provides a typical configuration for those pin(s); other configurations may
|
||
|
|
//! work as well depending upon the board setup (for example, using the on-chip
|
||
|
|
//! pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an external
|
||
|
|
//! peripheral interface pin; it only configures an external peripheral
|
||
|
|
//! interface pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the
|
||
|
|
//! external peripheral interface function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeEPI(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the Ethernet peripheral as LED signals.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The Ethernet peripheral provides four signals that can be used to drive
|
||
|
|
//! an LED (for example, for link status/activity). This function provides a
|
||
|
|
//! typical configuration for the pins.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an Ethernet LED
|
||
|
|
//! pin; it only configures an Ethernet LED pin for proper operation. Note
|
||
|
|
//! that a GPIOPinConfigure() function call is also required to properly
|
||
|
|
//! configure the pin for the Ethernet LED function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeEthernetLED(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the Ethernet peripheral as MII signals.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The Ethernet peripheral on some parts provides a set of MII signals that
|
||
|
|
//! are used to connect to an external PHY. This function provides a typical
|
||
|
|
//! configuration for the pins.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an Ethernet MII
|
||
|
|
//! pin; it only configures an Ethernet MII pin for proper operation. Note
|
||
|
|
//! that a GPIOPinConfigure() function call is also required to properly
|
||
|
|
//! configure the pin for the Ethernet MII function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeEthernetMII(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as GPIO inputs.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! GPIO inputs. This function provides the proper configuration for those
|
||
|
|
//! pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeGPIOInput(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as GPIO outputs.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! GPIO outputs. This function provides the proper configuration for those
|
||
|
|
//! pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeGPIOOutput(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be outputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_OUT);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as GPIO open drain outputs.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! GPIO outputs. This function provides the proper configuration for those
|
||
|
|
//! pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeGPIOOutputOD(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_OD);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be outputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_OUT);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin for use as SDA by the I2C peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin.
|
||
|
|
//!
|
||
|
|
//! The I2C pins must be properly configured for the I2C peripheral to function
|
||
|
|
//! correctly. This function provides the proper configuration for the SDA
|
||
|
|
//! pin.
|
||
|
|
//!
|
||
|
|
//! The pin is specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an I2C SDA pin; it
|
||
|
|
//! only configures an I2C SDA pin for proper operation. Note that a
|
||
|
|
//! GPIOPinConfigure() function call is also required to properly configure a
|
||
|
|
//! pin for the I2C SDA function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeI2C(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for open-drain operation with a weak pull-up.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_OD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin for use as SCL by the I2C peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin.
|
||
|
|
//!
|
||
|
|
//! The I2C pins must be properly configured for the I2C peripheral to function
|
||
|
|
//! correctly. This function provides the proper configuration for the SCL
|
||
|
|
//! pin.
|
||
|
|
//!
|
||
|
|
//! The pin is specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an I2C SCL pin; it
|
||
|
|
//! only configures an I2C SCL pin for proper operation. Note that a
|
||
|
|
//! GPIOPinConfigure() function call is also required to properly configure a
|
||
|
|
//! pin for the I2C SCL function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeI2CSCL(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the LCD Controller.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The LCD controller pins must be properly configured for the LCD controller
|
||
|
|
//! to function correctly. This function provides a typical configuration for
|
||
|
|
//! those pin(s); other configurations may work as well depending upon the
|
||
|
|
//! board setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an LCD pin; it only
|
||
|
|
//! configures an LCD pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the LCD
|
||
|
|
//! controller function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeLCD(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation and beefed up drive.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the LPC module.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The LPC pins must be properly configured for the LPC module to function
|
||
|
|
//! correctly. This function provides a typical configuration for those
|
||
|
|
//! pin(s); other configurations may work as well depending upon the board
|
||
|
|
//! setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an LPC pin; it only
|
||
|
|
//! configures an LPC pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the LPC
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeLPC(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures a pin for receive use by the PECI module.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The PECI receive pin must be properly configured for the PECI module to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! that pin.
|
||
|
|
//!
|
||
|
|
//! The pin is specified using a bit-packed byte, where each bit that is set
|
||
|
|
//! identifies the pin to be accessed, and where bit 0 of the byte represents
|
||
|
|
//! GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a PECI receive pin;
|
||
|
|
//! it only configures a PECI receive pin for proper operation. Note that a
|
||
|
|
//! GPIOPinConfigure() function call is also required to properly configure a
|
||
|
|
//! pin for the PECI receive function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypePECIRx(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for analog operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_ANALOG);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures a pin for transmit use by the PECI module.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The PECI transmit pin must be properly configured for the PECI module to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! that pin.
|
||
|
|
//!
|
||
|
|
//! The pin is specified using a bit-packed byte, where each bit that is set
|
||
|
|
//! identifies the pin to be accessed, and where bit 0 of the byte represents
|
||
|
|
//! GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a PECI transmit
|
||
|
|
//! pin; it only configures a PECI transmit pin for proper operation. Note
|
||
|
|
//! that a GPIOPinConfigure() function call is also required to properly
|
||
|
|
//! configure the pin for the PECI transmit function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypePECITx(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for analog operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the PWM peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The PWM pins must be properly configured for the PWM peripheral to function
|
||
|
|
//! correctly. This function provides a typical configuration for those
|
||
|
|
//! pin(s); other configurations may work as well depending upon the board
|
||
|
|
//! setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a PWM pin; it only
|
||
|
|
//! configures a PWM pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the PWM
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypePWM(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the QEI peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The QEI pins must be properly configured for the QEI peripheral to function
|
||
|
|
//! correctly. This function provides a typical configuration for those
|
||
|
|
//! pin(s); other configurations may work as well depending upon the board
|
||
|
|
//! setup (for example, not using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a QEI pin; it only
|
||
|
|
//! configures a QEI pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the QEI
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeQEI(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation with a weak pull-up.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_STD_WPU);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the SSI peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The SSI pins must be properly configured for the SSI peripheral to function
|
||
|
|
//! correctly. This function provides a typical configuration for those
|
||
|
|
//! pin(s); other configurations may work as well depending upon the board
|
||
|
|
//! setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a SSI pin; it only
|
||
|
|
//! configures a SSI pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the SSI
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeSSI(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the Timer peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The CCP pins must be properly configured for the timer peripheral to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! those pin(s); other configurations may work as well depending upon the
|
||
|
|
//! board setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a timer pin; it
|
||
|
|
//! only configures a timer pin for proper operation. Note that a
|
||
|
|
//! GPIOPinConfigure() function call is also required to properly configure a
|
||
|
|
//! pin for the CCP function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeTimer(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the UART peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The UART pins must be properly configured for the UART peripheral to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! those pin(s); other configurations may work as well depending upon the
|
||
|
|
//! board setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a UART pin; it
|
||
|
|
//! only configures a UART pin for proper operation. Note that a
|
||
|
|
//! GPIOPinConfigure() function call is also required to properly configure a
|
||
|
|
//! pin for the UART function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeUART(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the USB peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! USB analog pins must be properly configured for the USB peripheral to
|
||
|
|
//! function correctly. This function provides the proper configuration for
|
||
|
|
//! any USB analog pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a USB pin; it only
|
||
|
|
//! configures a USB pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the USB
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeUSBAnalog(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for analog operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_ANALOG);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use by the USB peripheral.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! USB digital pins must be properly configured for the USB peripheral to
|
||
|
|
//! function correctly. This function provides a typical configuration for
|
||
|
|
//! the digital USB pin(s); other configurations may work as well depending
|
||
|
|
//! upon the board setup (for example, using the on-chip pull-ups).
|
||
|
|
//!
|
||
|
|
//! This function should only be used with EPEN and PFAULT pins as all other
|
||
|
|
//! USB pins are analog in nature or are not used in devices without OTG
|
||
|
|
//! functionality.
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a USB pin; it only
|
||
|
|
//! configures a USB pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the USB
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeUSBDigital(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as a hibernate wake-on-high source.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! hibernate wake-high inputs. This function provides the proper
|
||
|
|
//! configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeWakeHigh(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for wake-high operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_WAKE_HIGH);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as a hibernate wake-on-low source.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! hibernate wake-low inputs. This function provides the proper
|
||
|
|
//! configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeWakeLow(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) inputs.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_IN);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for wake-high operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_WAKE_LOW);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as scan matrix keyboard rows (outputs).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! scan matrix keyboard outputs. This function provides the proper
|
||
|
|
//! configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a scan matrix
|
||
|
|
//! keyboard row pin; it only configures a scan matrix keyboard row pin for
|
||
|
|
//! proper operation. Note that a GPIOPinConfigure() function call is also
|
||
|
|
//! required to properly configure a pin for the scan matrix keyboard
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeKBRow(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for push/pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as scan matrix keyboard columns (inputs).
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! scan matrix keyboard inputs. This function provides the proper
|
||
|
|
//! configuration for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a scan matrix
|
||
|
|
//! keyboard column pin; it only configures a scan matrix keyboard column pin
|
||
|
|
//! for proper operation. Note that a GPIOPinConfigure() function call is also
|
||
|
|
//! required to properly configure a pin for the scan matrix keyboard
|
||
|
|
//! function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeKBColumn(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA,
|
||
|
|
GPIO_PIN_TYPE_STD_WPU);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as an LED sequencer output.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! LED sequencers. This function provides the proper configuration for those
|
||
|
|
//! pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into an LED sequencer
|
||
|
|
//! output pin; it only configures an LED sequencer output pin for proper
|
||
|
|
//! operation. Note that a GPIOPinConfigure() function call is also
|
||
|
|
//! required to properly configure a pin for the LED sequencer function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeLEDSeq(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for push/pull operation and 8mA strength. The external
|
||
|
|
// hardware should be set up such that we sink current when the LED is
|
||
|
|
// turned on, hence the 8mA configuration choice.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures pin(s) for use as Consumer Infrared inputs or outputs.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! The GPIO pins must be properly configured in order to function correctly as
|
||
|
|
//! Consumer Infrared pins. This function provides the proper configuration
|
||
|
|
//! for those pin(s).
|
||
|
|
//!
|
||
|
|
//! The pin(s) are specified using a bit-packed byte, where each bit that is
|
||
|
|
//! set identifies the pin to be accessed, and where bit 0 of the byte
|
||
|
|
//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on.
|
||
|
|
//!
|
||
|
|
//! \note This function cannot be used to turn any pin into a CIR pin; it only
|
||
|
|
//! configures a CIR pin for proper operation. Note that a GPIOPinConfigure()
|
||
|
|
//! function call is also required to properly configure a pin for the
|
||
|
|
//! Consumer Infrared function.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinTypeCIR(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Make the pin(s) be peripheral controlled.
|
||
|
|
//
|
||
|
|
GPIODirModeSet(ui32Port, ui8Pins, GPIO_DIR_MODE_HW);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pad(s) for standard push-pull operation.
|
||
|
|
//
|
||
|
|
GPIOPadConfigSet(ui32Port, ui8Pins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Retrieves the wake pins status.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//!
|
||
|
|
//! This function returns the GPIO wake pin status values. The returned
|
||
|
|
//! bitfield shows low or high pin state via a value of 0 or 1.
|
||
|
|
//!
|
||
|
|
//! \note This function is not available on all devices, consult the data sheet
|
||
|
|
//! to ensure that the device you are using supports GPIO wake pins.
|
||
|
|
//!
|
||
|
|
//! \note A subset of GPIO pins on Tiva devices, notably those used by the
|
||
|
|
//! JTAG/SWD interface and any pin capable of acting as an NMI input, are
|
||
|
|
//! locked against inadvertent reconfiguration. These pins must be unlocked
|
||
|
|
//! using direct register writes to the relevant GPIO_O_LOCK and GPIO_O_CR
|
||
|
|
//! registers before this function can be called. Please see the ``gpio_jtag''
|
||
|
|
//! example application for the mechanism required and consult your part
|
||
|
|
//! datasheet for information on affected pins.
|
||
|
|
//!
|
||
|
|
//! \return Returns the wake pin status.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
GPIOPinWakeStatus(uint32_t ui32Port)
|
||
|
|
{
|
||
|
|
return(ui32Port + GPIO_O_WAKESTAT);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Configures the alternate function of a GPIO pin.
|
||
|
|
//!
|
||
|
|
//! \param ui32PinConfig is the pin configuration value, specified as only one
|
||
|
|
//! of the \b GPIO_P??_??? values.
|
||
|
|
//!
|
||
|
|
//! This function configures the pin mux that selects the peripheral function
|
||
|
|
//! associated with a particular GPIO pin. Only one peripheral function at a
|
||
|
|
//! time can be associated with a GPIO pin, and each peripheral function should
|
||
|
|
//! only be associated with a single GPIO pin at a time (despite the fact that
|
||
|
|
//! many of them can be associated with more than one GPIO pin). To fully
|
||
|
|
//! configure a pin, a GPIOPinType*() function should also be called.
|
||
|
|
//!
|
||
|
|
//! The available mappings are supplied on a per-device basis in
|
||
|
|
//! <tt>pin_map.h</tt>. The \b PART_<partno> defines controls which set of
|
||
|
|
//! defines are included so that they match the device that is being used.
|
||
|
|
//! For example, \b PART_TM4C129XNCZAD must be defined in order to get the
|
||
|
|
//! correct pin mappings for the TM4C129XNCZAD device.
|
||
|
|
//!
|
||
|
|
//! \note If the same signal is assigned to two different GPIO port
|
||
|
|
//! pins, the signal is assigned to the port with the lowest letter and the
|
||
|
|
//! assignment to the higher letter port is ignored.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOPinConfigure(uint32_t ui32PinConfig)
|
||
|
|
{
|
||
|
|
uint32_t ui32Base, ui32Shift;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Check the argument.
|
||
|
|
//
|
||
|
|
ASSERT(((ui32PinConfig >> 16) & 0xff) < 15);
|
||
|
|
ASSERT(((ui32PinConfig >> 8) & 0xe3) == 0);
|
||
|
|
|
||
|
|
//
|
||
|
|
// Extract the base address index from the input value.
|
||
|
|
//
|
||
|
|
ui32Base = (ui32PinConfig >> 16) & 0xff;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get the base address of the GPIO module, selecting either the APB or the
|
||
|
|
// AHB aperture as appropriate.
|
||
|
|
//
|
||
|
|
if(HWREG(SYSCTL_GPIOHBCTL) & (1 << ui32Base))
|
||
|
|
{
|
||
|
|
ui32Base = g_pui32GPIOBaseAddrs[(ui32Base << 1) + 1];
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
ui32Base = g_pui32GPIOBaseAddrs[ui32Base << 1];
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Extract the shift from the input value.
|
||
|
|
//
|
||
|
|
ui32Shift = (ui32PinConfig >> 8) & 0xff;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Write the requested pin muxing value for this GPIO pin.
|
||
|
|
//
|
||
|
|
HWREG(ui32Base + GPIO_O_PCTL) = ((HWREG(ui32Base + GPIO_O_PCTL) &
|
||
|
|
~(0xf << ui32Shift)) |
|
||
|
|
((ui32PinConfig & 0xf) << ui32Shift));
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Enables a GPIO pin as a trigger to start a DMA transaction.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! This function enables a GPIO pin to be used as a trigger to start a uDMA
|
||
|
|
//! transaction. Any GPIO pin can be configured to be an external trigger for
|
||
|
|
//! the uDMA. The GPIO pin still generates interrupts if the interrupt is
|
||
|
|
//! enabled for the selected pin.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIODMATriggerEnable(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin as a DMA trigger.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_DMACTL) |= ui8Pins;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Disables a GPIO pin as a trigger to start a DMA transaction.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! This function disables a GPIO pin from being used as a trigger to start a
|
||
|
|
//! uDMA transaction. This function can be used to disable this feature if it
|
||
|
|
//! was enabled via a call to GPIODMATriggerEnable().
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIODMATriggerDisable(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin as a DMA trigger.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_DMACTL) &= (~ui8Pins);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Enables a GPIO pin as a trigger to start an ADC capture.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! This function enables a GPIO pin to be used as a trigger to start an ADC
|
||
|
|
//! sequence. Any GPIO pin can be configured to be an external trigger for an
|
||
|
|
//! ADC sequence. The GPIO pin still generates interrupts if the interrupt is
|
||
|
|
//! enabled for the selected pin. To enable the use of a GPIO pin to trigger
|
||
|
|
//! the ADC module, the ADCSequenceConfigure() function must be called with the
|
||
|
|
//! \b ADC_TRIGGER_EXTERNAL parameter.
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOADCTriggerEnable(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin as a DMA trigger.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_ADCCTL) |= ui8Pins;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! Disable a GPIO pin as a trigger to start an ADC capture.
|
||
|
|
//!
|
||
|
|
//! \param ui32Port is the base address of the GPIO port.
|
||
|
|
//! \param ui8Pins is the bit-packed representation of the pin(s).
|
||
|
|
//!
|
||
|
|
//! This function disables a GPIO pin to be used as a trigger to start an ADC
|
||
|
|
//! sequence. This function can be used to disable this feature if it was
|
||
|
|
//! enabled via a call to GPIOADCTriggerEnable().
|
||
|
|
//!
|
||
|
|
//! \return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
GPIOADCTriggerDisable(uint32_t ui32Port, uint8_t ui8Pins)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Check the arguments.
|
||
|
|
//
|
||
|
|
ASSERT(_GPIOBaseValid(ui32Port));
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set the pin as a DMA trigger.
|
||
|
|
//
|
||
|
|
HWREG(ui32Port + GPIO_O_ADCCTL) &= (~ui8Pins);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Close the Doxygen group.
|
||
|
|
//! @}
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|