libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nxp/imx/imxrt/imxrt1060-nxp-evk/board/Kconfig

308 lines
7.4 KiB
Plaintext
Raw Normal View History

添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
menu "Hardware Drivers Config"
config BSP_USING_HYPERFLASH
bool
default n
config BSP_USING_4MFLASH
bool
default n
config SOC_MIMXRT1062DVL6A
bool
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
select SOC_IMXRT1060_SERIES
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
select BSP_USING_4MFLASH
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
default y
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
menu "Onboard Peripheral Drivers"
增加双网口配置选项，增加phy8211F 驱动 (#6278) * Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <920369182@qq.com>
2022-08-15 11:21:27 +08:00
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
config BSP_USING_SDRAM
bool "Enable SDRAM"
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
default n
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
menuconfig BSP_USING_ETH
bool "Enable Ethernet"
select RT_USING_NETDEV
select RT_USING_LWIP
default n
if BSP_USING_ETH
config BSP_USING_PHY
select RT_USING_PHY
bool "Enable ethernet phy"
default y
if BSP_USING_PHY
config PHY_USING_KSZ8081
bool "i.MX RT1060EVK uses ksz8081 phy"
default y
if PHY_USING_KSZ8081
config PHY_KSZ8081_ADDRESS
int "Specify address of phy device"
default 2
config PHY_RESET_KSZ8081_PORT
int "indicate port of reset"
default 1
config PHY_RESET_KSZ8081_PIN
int "indicate pin of reset"
default 9
config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
bool "Enable the PHY ksz8081 RMII50M mode"
depends on PHY_USING_KSZ8081
default y
endif
endif
endif
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
menuconfig BSP_USING_LCD
bool "Enable LCD"
default n
if BSP_USING_LCD
config LCD_WIDTH
int "width"
default 480
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_HEIGHT
int "height"
default 272
config LCD_HFP
int "HFP"
default 4
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_VFP
int "VFP"
default 4
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_HBP
int "HBP"
default 8
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_VBP
int "VBP"
default 2
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_HSW
int "HSW"
default 40
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_VSW
int "VSW"
default 10
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_BL_PIN
int "Backlight ctrl pin"
default 63
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config LCD_RST_PIN
int "Reset pin"
default 2
endif
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-16 22:27:06 +08:00
menuconfig BSP_USING_TOUCHPAD
bool "Enable TOUCHPAD"
select BSP_USING_PXP
select BSP_USING_CACHE
select BSP_USING_I2C
select BSP_USING_LCD
default n
if BSP_USING_TOUCHPAD
choice
prompt "Select panel"
[imxrt1060] fix a tiny problme this is report in slack group: - I had to do a small fix in board/linker_scripts/link.lds file. line 81, should be: ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data); (add a space between ivt_begin and "=“). - For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
2022-08-14 08:32:41 +08:00
default DEMO_PANEL_RK043FN66HS
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-16 22:27:06 +08:00
config DEMO_PANEL_RK043FN02H
bool "RK043FN02H-CT"
config DEMO_PANEL_RK043FN66HS
bool "RK043FN66HS-CTG"
endchoice
endif
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
config BSP_USING_LVGL
bool "Enable LVGL for LCD"
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
select BSP_USING_PXP
select BSP_USING_CACHE
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
select BSP_USING_LCD
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-16 22:27:06 +08:00
select BSP_USING_TOUCHPAD
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
select PKG_USING_LVGL
default n
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
if BSP_USING_LVGL
config BSP_USING_LVGL_DEMO
bool "Enable LVGL demo"
select PKG_USING_LV_MUSIC_DEMO
[lvgl] remove suareline studio specific support for imxrt1060 (#6261) * [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes * [lvgl] remove specific suppport for imxrt1060 https://github.com/lvgl/lvgl/pull/3566
2022-08-14 10:02:41 +08:00
default y
[imxrt1060]support NXP GUiGuider
2022-05-13 13:01:09 +08:00
config BSP_USING_NXP_GUIGUIDER
bool "Support NXP GUI Guider"
select PKG_USING_GUI_GUIDER_DEMO
default n
prepare to support squareline studio
2022-05-06 02:21:21 +08:00
endif
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
menuconfig BSP_USING_FS
bool "Enable File System"
select RT_USING_DFS_DEVFS
select RT_USING_DFS
default n
if BSP_USING_FS
config BSP_USING_SDCARD_FATFS
bool "Enable SDCARD (FATFS)"
select BSP_USING_SDIO
select RT_USING_DFS_ELMFAT
default n
endif
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
endmenu
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
menu "On-chip Peripheral Drivers"
[RT1060][SPI]完善SPI支持，完善SPI对RW007的支持 (#7193) * [RT1060][SPI]添加SPI支持，并完善RW007支持
2023-04-07 18:56:51 +08:00
config BSP_USING_DMA
bool "Enable DMA"
default n
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
default y
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
config BSP_USING_RTC
bool "Enable RTC"
select RT_USING_RTC
default n
config BSP_USING_SDIO
bool "Enable SDIO"
select RT_USING_SDIO
select RT_USING_DFS
default n
if BSP_USING_SDIO
config CODE_STORED_ON_SDCARD
bool "Enable Code STORED On SDCARD"
default n
format sconscript Kconfig files
2023-03-19 07:28:58 +08:00
help
"SD CARD work as boot devive"
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
endif
config BSP_USING_USB
bool "Enable USB"
select RT_USING_USB_HOST
default n
format sconscript Kconfig files
2023-03-19 07:28:58 +08:00
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
if BSP_USING_USB
config BSP_USB0_HOST
bool "Enable USB0"
default n
config BSP_USB1_HOST
bool "Enable USB1"
format sconscript Kconfig files
2023-03-19 07:28:58 +08:00
default n
[imxrt1060] Update 1060 sdk 2.12.1 (#6892) 更新的SDK2.12.1更新imxrt1060的驱动
2023-02-07 11:17:31 +08:00
endif
[imxrt 1060] support touchpad Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-16 22:27:06 +08:00
menuconfig BSP_USING_I2C
bool "Enable I2C"
select RT_USING_I2C
default y
if BSP_USING_I2C
config BSP_USING_I2C1
bool
default y
choice
prompt "Select I2C1 badurate"
default HW_I2C1_BADURATE_100kHZ
config HW_I2C1_BADURATE_100kHZ
bool "Badurate 100kHZ"
config HW_I2C1_BADURATE_400kHZ
bool "Badurate 400kHZ"
endchoice
endif
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
menuconfig BSP_USING_LPUART
bool "Enable UART"
select RT_USING_SERIAL
default y
if BSP_USING_LPUART
config BSP_USING_LPUART1
bool "Enable LPUART1"
default y
config BSP_USING_LPUART2
bool "Enable LPUART2"
default n
config BSP_USING_LPUART3
bool "Enable LPUART3"
default n
config BSP_USING_LPUART4
bool "Enable LPUART4"
default n
config BSP_USING_LPUART5
bool "Enable LPUART5"
default n
config BSP_USING_LPUART6
bool "Enable LPUART6"
default n
config BSP_USING_LPUART7
bool "Enable LPUART7"
default n
config BSP_USING_LPUART8
bool "Enable LPUART8"
default n
endif
[RT1060][SPI]完善SPI支持，完善SPI对RW007的支持 (#7193) * [RT1060][SPI]添加SPI支持，并完善RW007支持
2023-04-07 18:56:51 +08:00
menuconfig BSP_USING_SPI
bool "Enable SPI"
select RT_USING_SPI
select RT_USING_PIN
default n
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1"
default n
config BSP_USING_BLOCKING_SPI
bool "Enable SPI Polling xfer"
default n
config BSP_SPI1_USING_DMA
bool "Enable SPI1 DMA xfer"
depends on BSP_USING_SPI1
select BSP_USING_DMA
default n
config BSP_SPI1_RX_DMA_CHANNEL
depends on BSP_SPI1_USING_DMA
int "Set SPI1 RX DMA channel (0-32)"
default 0
config BSP_SPI1_TX_DMA_CHANNEL
depends on BSP_SPI1_USING_DMA
int "Set SPI1 TX DMA channel (0-32)"
default 1
endif
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
config BSP_USING_PXP
bool "Enable PXP"
default n
config BSP_USING_CACHE
bool "Enable CACHE"
default n
增加双网口配置选项，增加phy8211F 驱动 (#6278) * Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <920369182@qq.com>
2022-08-15 11:21:27 +08:00
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-04 14:39:06 +08:00
endmenu
添加 imxrt1060-evk BSP (#5657) * 添加 imxrt1060-evk BSP * add LVGL * add README.md * Delete irrelevant files * Modify the optimization level to O1 * Organize documents * Source code formatting
2022-03-11 12:13:56 +08:00
menu "Board extended module Drivers"
endmenu
endmenu