libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/bouffalo_lab/libraries/rt_drivers/Kconfig

1520 lines
65 KiB
Plaintext
Raw Normal View History

add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
menu "General Drivers Configuration"
[bsp/bouffalo_lab]add sdcard driver (#7577)
2023-05-29 09:47:25 +08:00
config BSP_DRIVER_DEBUG
bool "Enable Driver Debug Log Output"
default n
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
menu "General Purpose UARTs"
menuconfig BSP_USING_UART0
bool "Enable UART0"
default y
if BSP_USING_UART0
choice
prompt "UART0 TX PIN"
default UART0_TX_USING_GPIO16 if BSP_USING_BL60X
default UART0_TX_USING_GPIO21 if BSP_USING_BL61X
default UART0_TX_USING_GPIO14 if BSP_USING_BL70X
default UART0_TX_USING_GPIO14 if BSP_USING_BL808
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_TX_USING_GPIO0
bool "GPIO_0"
config UART0_TX_USING_GPIO1
bool "GPIO_1"
config UART0_TX_USING_GPIO2
bool "GPIO_2"
config UART0_TX_USING_GPIO3
bool "GPIO_3"
config UART0_TX_USING_GPIO4
bool "GPIO_4"
config UART0_TX_USING_GPIO5
bool "GPIO_5"
config UART0_TX_USING_GPIO6
bool "GPIO_6"
config UART0_TX_USING_GPIO7
bool "GPIO_7"
config UART0_TX_USING_GPIO8
bool "GPIO_8"
config UART0_TX_USING_GPIO9
bool "GPIO_9"
config UART0_TX_USING_GPIO10
bool "GPIO_10"
config UART0_TX_USING_GPIO11
bool "GPIO_11"
config UART0_TX_USING_GPIO12
bool "GPIO_12"
config UART0_TX_USING_GPIO13
bool "GPIO_13"
config UART0_TX_USING_GPIO13
bool "GPIO_13"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_TX_USING_GPIO14
bool "GPIO_14"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_TX_USING_GPIO15
bool "GPIO_15"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_TX_USING_GPIO16
bool "GPIO_16"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_TX_USING_GPIO17
bool "GPIO_17"
config UART0_TX_USING_GPIO18
bool "GPIO_18"
config UART0_TX_USING_GPIO19
bool "GPIO_19"
config UART0_TX_USING_GPIO20
bool "GPIO_20"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_TX_USING_GPIO21
bool "GPIO_21"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_TX_USING_GPIO22
bool "GPIO_22"
config UART0_TX_USING_GPIO23
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_23"
config UART0_TX_USING_GPIO24
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_24"
config UART0_TX_USING_GPIO25
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_25"
config UART0_TX_USING_GPIO26
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_26"
config UART0_TX_USING_GPIO27
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_27"
config UART0_TX_USING_GPIO28
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_28"
config UART0_TX_USING_GPIO29
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_29"
config UART0_TX_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_30"
config UART0_TX_USING_GPIO31
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_31"
config UART0_TX_USING_GPIO32
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_32"
config UART0_TX_USING_GPIO33
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_33"
config UART0_TX_USING_GPIO34
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_34"
config UART0_TX_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config UART0_TX_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config UART0_TX_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config UART0_TX_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config UART0_TX_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config UART0_TX_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
config UART0_TX_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endchoice
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
choice
prompt "UART0 RX PIN"
default UART0_RX_USING_GPIO7 if BSP_USING_BL60X
default UART0_RX_USING_GPIO22 if BSP_USING_BL61X
default UART0_RX_USING_GPIO23 if BSP_USING_BL70X
default UART0_RX_USING_GPIO15 if BSP_USING_BL808
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_RX_USING_GPIO0
bool "GPIO_0"
config UART0_RX_USING_GPIO1
bool "GPIO_1"
config UART0_RX_USING_GPIO2
bool "GPIO_2"
config UART0_RX_USING_GPIO3
bool "GPIO_3"
config UART0_RX_USING_GPIO4
bool "GPIO_4"
config UART0_RX_USING_GPIO5
bool "GPIO_5"
config UART0_RX_USING_GPIO6
bool "GPIO_6"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_RX_USING_GPIO7
bool "GPIO_7"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_RX_USING_GPIO8
bool "GPIO_8"
config UART0_RX_USING_GPIO9
bool "GPIO_9"
config UART0_RX_USING_GPIO10
bool "GPIO_10"
config UART0_RX_USING_GPIO11
bool "GPIO_11"
config UART0_RX_USING_GPIO12
bool "GPIO_12"
config UART0_RX_USING_GPIO13
bool "GPIO_13"
config UART0_RX_USING_GPIO14
bool "GPIO_14"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_RX_USING_GPIO15
bool "GPIO_15"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_RX_USING_GPIO16
bool "GPIO_16"
config UART0_RX_USING_GPIO17
bool "GPIO_17"
config UART0_RX_USING_GPIO18
bool "GPIO_18"
config UART0_RX_USING_GPIO19
bool "GPIO_19"
config UART0_RX_USING_GPIO20
bool "GPIO_20"
config UART0_RX_USING_GPIO21
bool "GPIO_21"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART0_RX_USING_GPIO22
bool "GPIO_22"
config UART0_RX_USING_GPIO23
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
bool "GPIO_23"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART0_RX_USING_GPIO24
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_24"
config UART0_RX_USING_GPIO25
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_25"
config UART0_RX_USING_GPIO26
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_26"
config UART0_RX_USING_GPIO27
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_27"
config UART0_RX_USING_GPIO28
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_28"
config UART0_RX_USING_GPIO29
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_29"
config UART0_RX_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_30"
config UART0_RX_USING_GPIO31
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_31"
config UART0_RX_USING_GPIO32
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_32"
config UART0_RX_USING_GPIO33
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_33"
config UART0_RX_USING_GPIO34
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_34"
config UART0_RX_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config UART0_RX_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config UART0_RX_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config UART0_RX_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config UART0_RX_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config UART0_RX_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
config UART0_RX_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endchoice
endif
menuconfig BSP_USING_UART1
bool "Enable UART1"
default n
if BSP_USING_UART1
choice
prompt "UART1 TX PIN"
default UART1_TX_USING_GPIO4 if BSP_USING_BL60X
default UART1_TX_USING_GPIO16 if BSP_USING_BL61X
default UART1_TX_USING_GPIO26 if BSP_USING_BL70X
default UART1_TX_USING_GPIO18 if BSP_USING_BL808
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_TX_USING_GPIO0
bool "GPIO_0"
config UART1_TX_USING_GPIO1
bool "GPIO_1"
config UART1_TX_USING_GPIO2
bool "GPIO_2"
config UART1_TX_USING_GPIO3
bool "GPIO_3"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_TX_USING_GPIO4
bool "GPIO_4"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_TX_USING_GPIO5
bool "GPIO_5"
config UART1_TX_USING_GPIO6
bool "GPIO_6"
config UART1_TX_USING_GPIO7
bool "GPIO_7"
config UART1_TX_USING_GPIO8
bool "GPIO_8"
config UART1_TX_USING_GPIO9
bool "GPIO_9"
config UART1_TX_USING_GPIO10
bool "GPIO_10"
config UART1_TX_USING_GPIO11
bool "GPIO_11"
config UART1_TX_USING_GPIO12
bool "GPIO_12"
config UART1_TX_USING_GPIO13
bool "GPIO_13"
config UART1_TX_USING_GPIO14
bool "GPIO_14"
config UART1_TX_USING_GPIO15
bool "GPIO_15"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_TX_USING_GPIO16
bool "GPIO_16"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_TX_USING_GPIO17
bool "GPIO_17"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_TX_USING_GPIO18
bool "GPIO_18"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_TX_USING_GPIO19
bool "GPIO_19"
config UART1_TX_USING_GPIO20
bool "GPIO_20"
config UART1_TX_USING_GPIO21
bool "GPIO_21"
config UART1_TX_USING_GPIO22
bool "GPIO_22"
config UART1_TX_USING_GPIO23
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_23"
config UART1_TX_USING_GPIO24
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_24"
config UART1_TX_USING_GPIO25
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_25"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_TX_USING_GPIO26
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
bool "GPIO_26"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_TX_USING_GPIO27
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_27"
config UART1_TX_USING_GPIO28
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_28"
config UART1_TX_USING_GPIO29
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_29"
config UART1_TX_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_30"
config UART1_TX_USING_GPIO31
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_31"
config UART1_TX_USING_GPIO32
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_32"
config UART1_TX_USING_GPIO33
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_33"
config UART1_TX_USING_GPIO34
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_34"
config UART1_TX_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config UART1_TX_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config UART1_TX_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config UART1_TX_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config UART1_TX_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config UART1_TX_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
config UART1_TX_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endchoice
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
choice
prompt "UART1 RX PIN"
default UART1_RX_USING_GPIO3 if BSP_USING_BL60X
default UART1_RX_USING_GPIO17 if BSP_USING_BL61X
default UART1_RX_USING_GPIO27 if BSP_USING_BL70X
default UART1_RX_USING_GPIO19 if BSP_USING_BL808
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO0
bool "GPIO_0"
config UART1_RX_USING_GPIO1
bool "GPIO_1"
config UART1_RX_USING_GPIO2
bool "GPIO_2"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_RX_USING_GPIO3
bool "GPIO_3"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO4
bool "GPIO_4"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_RX_USING_GPIO5
bool "GPIO_5"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO6
bool "GPIO_6"
config UART1_RX_USING_GPIO7
bool "GPIO_7"
config UART1_RX_USING_GPIO8
bool "GPIO_8"
config UART1_RX_USING_GPIO9
bool "GPIO_9"
config UART1_RX_USING_GPIO10
bool "GPIO_10"
config UART1_RX_USING_GPIO11
bool "GPIO_11"
config UART1_RX_USING_GPIO12
bool "GPIO_12"
config UART1_RX_USING_GPIO13
bool "GPIO_13"
config UART1_RX_USING_GPIO14
bool "GPIO_14"
config UART1_RX_USING_GPIO15
bool "GPIO_15"
config UART1_RX_USING_GPIO16
bool "GPIO_16"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_RX_USING_GPIO17
bool "GPIO_17"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO18
bool "GPIO_18"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_RX_USING_GPIO19
bool "GPIO_19"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO20
bool "GPIO_20"
config UART1_RX_USING_GPIO21
bool "GPIO_21"
config UART1_RX_USING_GPIO22
bool "GPIO_22"
config UART1_RX_USING_GPIO23
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_23"
config UART1_RX_USING_GPIO24
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_24"
config UART1_RX_USING_GPIO25
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_25"
config UART1_RX_USING_GPIO26
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_26"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
config UART1_RX_USING_GPIO27
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
bool "GPIO_27"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART1_RX_USING_GPIO28
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_28"
config UART1_RX_USING_GPIO29
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_29"
config UART1_RX_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_30"
config UART1_RX_USING_GPIO31
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_31"
config UART1_RX_USING_GPIO32
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_32"
config UART1_RX_USING_GPIO33
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_33"
config UART1_RX_USING_GPIO34
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_34"
config UART1_RX_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config UART1_RX_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config UART1_RX_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config UART1_RX_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config UART1_RX_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config UART1_RX_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
config UART1_RX_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endchoice
endif
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
if BSP_USING_BL808
menuconfig BSP_USING_UART2
bool "Enable UART2"
default n
if BSP_USING_UART2
choice
prompt "UART2 TX PIN"
default UART2_TX_USING_GPIO20
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_TX_USING_GPIO0
bool "GPIO_0"
config UART2_TX_USING_GPIO1
bool "GPIO_1"
config UART2_TX_USING_GPIO2
bool "GPIO_2"
config UART2_TX_USING_GPIO3
bool "GPIO_3"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_TX_USING_GPIO4
bool "GPIO_4"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_TX_USING_GPIO5
bool "GPIO_5"
config UART2_TX_USING_GPIO6
bool "GPIO_6"
config UART2_TX_USING_GPIO7
bool "GPIO_7"
config UART2_TX_USING_GPIO8
bool "GPIO_8"
config UART2_TX_USING_GPIO9
bool "GPIO_9"
config UART2_TX_USING_GPIO10
bool "GPIO_10"
config UART2_TX_USING_GPIO11
bool "GPIO_11"
config UART2_TX_USING_GPIO12
bool "GPIO_12"
config UART2_TX_USING_GPIO13
bool "GPIO_13"
config UART2_TX_USING_GPIO14
bool "GPIO_14"
config UART2_TX_USING_GPIO15
bool "GPIO_15"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_TX_USING_GPIO16
bool "GPIO_16"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_TX_USING_GPIO17
bool "GPIO_17"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_TX_USING_GPIO18
bool "GPIO_18"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_TX_USING_GPIO19
bool "GPIO_19"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_TX_USING_GPIO20
bool "GPIO_20"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_TX_USING_GPIO21
bool "GPIO_21"
config UART2_TX_USING_GPIO22
bool "GPIO_22"
config UART2_TX_USING_GPIO23
bool "GPIO_23"
config UART2_TX_USING_GPIO24
bool "GPIO_24"
config UART2_TX_USING_GPIO25
bool "GPIO_25"
config UART2_TX_USING_GPIO26
bool "GPIO_26"
config UART2_TX_USING_GPIO27
bool "GPIO_27"
config UART2_TX_USING_GPIO28
bool "GPIO_28"
config UART2_TX_USING_GPIO29
bool "GPIO_29"
config UART2_TX_USING_GPIO30
bool "GPIO_30"
config UART2_TX_USING_GPIO31
bool "GPIO_31"
config UART2_TX_USING_GPIO32
bool "GPIO_32"
config UART2_TX_USING_GPIO33
bool "GPIO_33"
config UART2_TX_USING_GPIO34
bool "GPIO_34"
config UART2_TX_USING_GPIO35
bool "GPIO_35"
config UART2_TX_USING_GPIO36
bool "GPIO_36"
config UART2_TX_USING_GPIO37
bool "GPIO_37"
config UART2_TX_USING_GPIO38
bool "GPIO_38"
config UART2_TX_USING_GPIO39
bool "GPIO_39"
config UART2_TX_USING_GPIO44
bool "GPIO_44"
config UART2_TX_USING_GPIO45
bool "GPIO_45"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
endchoice
choice
prompt "UART2 RX PIN"
default UART2_RX_USING_GPIO21
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO0
bool "GPIO_0"
config UART2_RX_USING_GPIO1
bool "GPIO_1"
config UART2_RX_USING_GPIO2
bool "GPIO_2"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_RX_USING_GPIO3
bool "GPIO_3"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO4
bool "GPIO_4"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_RX_USING_GPIO5
bool "GPIO_5"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO6
bool "GPIO_6"
config UART2_RX_USING_GPIO7
bool "GPIO_7"
config UART2_RX_USING_GPIO8
bool "GPIO_8"
config UART2_RX_USING_GPIO9
bool "GPIO_9"
config UART2_RX_USING_GPIO10
bool "GPIO_10"
config UART2_RX_USING_GPIO11
bool "GPIO_11"
config UART2_RX_USING_GPIO12
bool "GPIO_12"
config UART2_RX_USING_GPIO13
bool "GPIO_13"
config UART2_RX_USING_GPIO13
bool "GPIO_13"
config UART2_RX_USING_GPIO14
bool "GPIO_14"
config UART2_RX_USING_GPIO15
bool "GPIO_15"
config UART2_RX_USING_GPIO16
bool "GPIO_16"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_RX_USING_GPIO17
bool "GPIO_17"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO18
bool "GPIO_18"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_RX_USING_GPIO19
bool "GPIO_19"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO20
bool "GPIO_20"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
config UART2_RX_USING_GPIO21
bool "GPIO_21"
[bsp/bouffalo_lab]update uart driver pin && bl808-d0 ioremap mode (#7456)
2023-05-07 23:13:38 +08:00
config UART2_RX_USING_GPIO22
bool "GPIO_22"
config UART2_RX_USING_GPIO23
bool "GPIO_23"
config UART2_RX_USING_GPIO24
bool "GPIO_24"
config UART2_RX_USING_GPIO25
bool "GPIO_25"
config UART2_RX_USING_GPIO26
bool "GPIO_26"
config UART2_RX_USING_GPIO27
bool "GPIO_27"
config UART2_RX_USING_GPIO28
bool "GPIO_28"
config UART2_RX_USING_GPIO29
bool "GPIO_29"
config UART2_RX_USING_GPIO30
bool "GPIO_30"
config UART2_RX_USING_GPIO31
bool "GPIO_31"
config UART2_RX_USING_GPIO32
bool "GPIO_32"
config UART2_RX_USING_GPIO33
bool "GPIO_33"
config UART2_RX_USING_GPIO34
bool "GPIO_34"
config UART2_RX_USING_GPIO35
bool "GPIO_35"
config UART2_RX_USING_GPIO36
bool "GPIO_36"
config UART2_RX_USING_GPIO37
bool "GPIO_37"
config UART2_RX_USING_GPIO38
bool "GPIO_38"
config UART2_RX_USING_GPIO39
bool "GPIO_39"
config UART2_RX_USING_GPIO44
bool "GPIO_44"
config UART2_RX_USING_GPIO45
bool "GPIO_45"
[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-25 19:05:33 +08:00
endchoice
endif
endif
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endmenu
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
default n
config BSP_USING_ADC
bool "Enable ADC"
select RT_USING_ADC
default n
[bsp][bl]update adc driver
2024-02-29 23:22:57 +08:00
if BSP_USING_ADC
config BSP_ADC_DMA_CHANNEL
string "ADC DMA Channel Name"
default "dma0_ch2"
config BSP_USING_ADC_CH0
bool "USING ADC CH0"
default n
if BSP_USING_ADC_CH0
config BSP_ADC_CH0_PIN
int "ADC CH0 Pin Num (GPIO_X)"
default 17
endif
config BSP_USING_ADC_CH1
bool "USING ADC CH1"
default n
if BSP_USING_ADC_CH1
config BSP_ADC_CH1_PIN
int "ADC CH1 Pin Num (GPIO_X)"
default 5
endif
config BSP_USING_ADC_CH2
bool "USING ADC CH2"
default n
if BSP_USING_ADC_CH2
config BSP_ADC_CH2_PIN
int "ADC CH2 Pin Num (GPIO_X)"
default 4
endif
config BSP_USING_ADC_CH3
bool "USING ADC CH3"
default n
if BSP_USING_ADC_CH3
config BSP_ADC_CH3_PIN
int "ADC CH3 Pin Num (GPIO_X)"
default 11
endif
config BSP_USING_ADC_CH4
bool "USING ADC CH4"
default n
if BSP_USING_ADC_CH4
config BSP_ADC_CH4_PIN
int "ADC CH4 Pin Num (GPIO_X)"
default 6
endif
config BSP_USING_ADC_CH5
bool "USING ADC CH5"
default n
if BSP_USING_ADC_CH5
config BSP_ADC_CH5_PIN
int "ADC CH5 Pin Num (GPIO_X)"
default 40
endif
config BSP_USING_ADC_CH6
bool "USING ADC CH6"
default n
if BSP_USING_ADC_CH6
config BSP_ADC_CH6_PIN
int "ADC CH6 Pin Num (GPIO_X)"
default 12
endif
config BSP_USING_ADC_CH7
bool "USING ADC CH7"
default n
if BSP_USING_ADC_CH7
config BSP_ADC_CH7_PIN
int "ADC CH7 Pin Num (GPIO_X)"
default 13
endif
config BSP_USING_ADC_CH8
bool "USING ADC CH8"
default n
if BSP_USING_ADC_CH8
config BSP_ADC_CH8_PIN
int "ADC CH8 Pin Num (GPIO_X)"
default 16
endif
config BSP_USING_ADC_CH9
bool "USING ADC CH9"
default n
if BSP_USING_ADC_CH9
config BSP_ADC_CH9_PIN
int "ADC CH9 Pin Num (GPIO_X)"
default 18
endif
config BSP_USING_ADC_CH10
bool "USING ADC CH10"
default n
if BSP_USING_ADC_CH10
config BSP_ADC_CH10_PIN
int "ADC CH10 Pin Num (GPIO_X)"
default 19
endif
endif
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
config BSP_USING_RTC
[bsp][bouffalo] add pwm & rtc & wdt devices (#7122)
2023-03-31 08:01:28 +08:00
bool "Enable RTC"
select RT_USING_RTC
default n
config BSP_USING_WDT
bool "Enable Watchdog Timer"
select RT_USING_WDT
default n
menuconfig BSP_USING_PWM
bool "Enable PWM"
default n
select RT_USING_PWM
if BSP_USING_PWM
config BSP_USING_PWM0
bool "Enable PWM0"
default n
config BSP_USING_PWM1
bool "Enable PWM1"
default n
config BSP_USING_PWM2
bool "Enable PWM2"
default n
config BSP_USING_PWM3
bool "Enable PWM3"
default n
endif
[bsp][bouffalo] add hwtimer & flash driver support (#7203) * add hwtimer & flash driver support
2023-04-15 15:34:36 +08:00
menuconfig BSP_USING_HWTIMER
bool "Enable HWTIMER"
default n
select RT_USING_HWTIMER
if BSP_USING_HWTIMER
config BSP_USING_TIMER0
bool "Enable TIMER0"
default n
config BSP_USING_TIMER1
bool "Enable TIMER1"
default n
endif
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
menuconfig BSP_USING_I2C
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
bool "Enable I2C BUS"
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
default n
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
select RT_USING_I2C
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
if BSP_USING_I2C
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config BSP_USING_HW_I2C
bool "Enable Hardware I2C BUS"
default n
if BSP_USING_HW_I2C
menuconfig BSP_USING_I2C0
bool "Enable I2C0 (hardware)"
default n
if BSP_USING_I2C0
choice
prompt "I2C0 SCL"
default I2C0_SCL_USING_GPIO14
[bsp][bl] add drv_soft_i2c (#7406)
2023-04-29 12:40:15 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C0_SCL_USING_GPIO0
bool "GPIO_0"
config I2C0_SCL_USING_GPIO2
bool "GPIO_2"
config I2C0_SCL_USING_GPIO4
bool "GPIO_4"
config I2C0_SCL_USING_GPIO6
bool "GPIO_6"
config I2C0_SCL_USING_GPIO8
bool "GPIO_8"
config I2C0_SCL_USING_GPIO10
bool "GPIO_10"
config I2C0_SCL_USING_GPIO12
bool "GPIO_12"
config I2C0_SCL_USING_GPIO14
bool "GPIO_14"
config I2C0_SCL_USING_GPIO16
bool "GPIO_16"
config I2C0_SCL_USING_GPIO18
bool "GPIO_18"
config I2C0_SCL_USING_GPIO20
bool "GPIO_20"
config I2C0_SCL_USING_GPIO22
bool "GPIO_22"
config I2C0_SCL_USING_GPIO24
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_8"
config I2C0_SCL_USING_GPIO26
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_26"
config I2C0_SCL_USING_GPIO28
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_28"
config I2C0_SCL_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_30"
config I2C0_SCL_USING_GPIO32
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_32"
config I2C0_SCL_USING_GPIO34
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_34"
config I2C0_SDA_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config I2C0_SDA_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config I2C0_SDA_USING_GPIO40
depends on BSP_USING_BL808
bool "GPIO_40"
config I2C1_SDA_USING_GPIO42
depends on BSP_USING_BL808
bool "GPIO_42"
config I2C0_SDA_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
endchoice
[bsp][bl] add drv_soft_i2c (#7406)
2023-04-29 12:40:15 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
choice
prompt "I2C0 SDA"
default I2C0_SDA_USING_GPIO15
[bsp][bl] add drv_soft_i2c (#7406)
2023-04-29 12:40:15 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C0_SDA_USING_GPIO1
bool "GPIO_1"
config I2C0_SDA_USING_GPIO3
bool "GPIO_3"
config I2C0_SDA_USING_GPIO5
bool "GPIO_5"
config I2C0_SDA_USING_GPIO7
bool "GPIO_7"
config I2C0_SDA_USING_GPIO9
bool "GPIO_9"
config I2C0_SDA_USING_GPIO11
bool "GPIO_11"
config I2C0_SDA_USING_GPIO13
bool "GPIO_13"
config I2C0_SDA_USING_GPIO15
bool "GPIO_15"
config I2C0_SDA_USING_GPIO17
bool "GPIO_17"
config I2C0_SDA_USING_GPIO19
bool "GPIO_19"
config I2C0_SDA_USING_GPIO21
bool "GPIO_21"
config I2C0_SDA_USING_GPIO23
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_23"
config I2C0_SDA_USING_GPIO25
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_25"
config I2C0_SDA_USING_GPIO27
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_27"
config I2C0_SDA_USING_GPIO29
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_29"
config I2C0_SDA_USING_GPIO31
depends on BSP_USING_BL61X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_31"
config I2C0_SDA_USING_GPIO33
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_33"
config I2C0_SDA_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config I2C0_SDA_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config I2C0_SDA_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config I2C0_SDA_USING_GPIO41
depends on BSP_USING_BL808
bool "GPIO_41"
config I2C0_SDA_USING_GPIO43
depends on BSP_USING_BL808
bool "GPIO_43"
config I2C0_SDA_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
endchoice
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C0_FREQUENCY
int "I2C0 Frequency"
default 400000
endif
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
menuconfig BSP_USING_I2C1
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "Enable I2C1 (hardware)"
default n
if BSP_USING_I2C1
choice
prompt "I2C1 SCL"
default I2C1_SCL_USING_GPIO0
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C1_SCL_USING_GPIO0
bool "GPIO_0"
config I2C1_SCL_USING_GPIO2
bool "GPIO_2"
config I2C1_SCL_USING_GPIO4
bool "GPIO_4"
config I2C1_SCL_USING_GPIO6
bool "GPIO_6"
config I2C1_SCL_USING_GPIO8
bool "GPIO_8"
config I2C1_SCL_USING_GPIO10
bool "GPIO_10"
config I2C1_SCL_USING_GPIO12
bool "GPIO_12"
config I2C1_SCL_USING_GPIO14
bool "GPIO_14"
config I2C1_SCL_USING_GPIO16
bool "GPIO_16"
config I2C1_SCL_USING_GPIO18
bool "GPIO_18"
config I2C1_SCL_USING_GPIO20
bool "GPIO_20"
config I2C1_SCL_USING_GPIO22
bool "GPIO_22"
config I2C1_SCL_USING_GPIO24
bool "GPIO_24"
config I2C1_SCL_USING_GPIO26
bool "GPIO_26"
config I2C1_SCL_USING_GPIO28
bool "GPIO_28"
config I2C1_SCL_USING_GPIO30
bool "GPIO_30"
config I2C1_SCL_USING_GPIO32
bool "GPIO_32"
config I2C1_SCL_USING_GPIO34
bool "GPIO_34"
config I2C1_SDA_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config I2C1_SDA_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config I2C1_SDA_USING_GPIO40
depends on BSP_USING_BL808
bool "GPIO_40"
config I2C1_SDA_USING_GPIO42
depends on BSP_USING_BL808
bool "GPIO_42"
config I2C1_SDA_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
endchoice
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
choice
prompt "I2C1 SDA"
default I2C1_SDA_USING_GPIO1
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C1_SDA_USING_GPIO1
bool "GPIO_1"
config I2C1_SDA_USING_GPIO3
bool "GPIO_3"
config I2C1_SDA_USING_GPIO5
bool "GPIO_5"
config I2C1_SDA_USING_GPIO7
bool "GPIO_7"
config I2C1_SDA_USING_GPIO9
bool "GPIO_9"
config I2C1_SDA_USING_GPIO11
bool "GPIO_11"
config I2C1_SDA_USING_GPIO13
bool "GPIO_13"
config I2C1_SDA_USING_GPIO15
bool "GPIO_15"
config I2C1_SDA_USING_GPIO17
bool "GPIO_17"
config I2C1_SDA_USING_GPIO19
bool "GPIO_19"
config I2C1_SDA_USING_GPIO21
bool "GPIO_21"
config I2C1_SDA_USING_GPIO23
bool "GPIO_23"
config I2C1_SDA_USING_GPIO25
bool "GPIO_25"
config I2C1_SDA_USING_GPIO27
bool "GPIO_27"
config I2C1_SDA_USING_GPIO29
bool "GPIO_29"
config I2C1_SDA_USING_GPIO31
bool "GPIO_31"
config I2C1_SDA_USING_GPIO33
bool "GPIO_33"
config I2C1_SDA_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config I2C1_SDA_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config I2C1_SDA_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config I2C1_SDA_USING_GPIO41
depends on BSP_USING_BL808
bool "GPIO_41"
config I2C1_SDA_USING_GPIO43
depends on BSP_USING_BL808
bool "GPIO_43"
config I2C1_SDA_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
endchoice
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
config I2C1_FREQUENCY
int "I2C1 Frequency"
default 400000
endif
[bsp/bouffalo_lab]add drv_i2c (#7473)
2023-05-11 10:12:20 +08:00
endif
[bsp][bl]update: drv_soft_i2c
2023-05-12 17:38:25 +08:00
if !BSP_USING_HW_I2C
menuconfig BSP_USING_SOFT_I2C1
bool "Enable I2C1 BUS (software simulation)"
select RT_USING_I2C_BITOPS
select BSP_USING_GPIO
default n
if BSP_USING_SOFT_I2C1
choice
prompt "I2C1 SCL"
default SOFT_I2C1_SCL_USING_GPIO0
config SOFT_I2C1_SCL_USING_GPIO0
bool "GPIO_0"
config SOFT_I2C1_SCL_USING_GPIO2
bool "GPIO_2"
config SOFT_I2C1_SCL_USING_GPIO4
bool "GPIO_4"
config SOFT_I2C1_SCL_USING_GPIO6
bool "GPIO_6"
config SOFT_I2C1_SCL_USING_GPIO8
bool "GPIO_8"
config SOFT_I2C1_SCL_USING_GPIO10
bool "GPIO_10"
config SOFT_I2C1_SCL_USING_GPIO12
bool "GPIO_12"
config SOFT_I2C1_SCL_USING_GPIO14
bool "GPIO_14"
config SOFT_I2C1_SCL_USING_GPIO16
bool "GPIO_16"
config SOFT_I2C1_SCL_USING_GPIO18
bool "GPIO_18"
config SOFT_I2C1_SCL_USING_GPIO20
bool "GPIO_20"
config SOFT_I2C1_SCL_USING_GPIO22
bool "GPIO_22"
config SOFT_I2C1_SCL_USING_GPIO24
bool "GPIO_8"
config SOFT_I2C1_SCL_USING_GPIO26
bool "GPIO_26"
config SOFT_I2C1_SCL_USING_GPIO28
bool "GPIO_28"
config SOFT_I2C1_SCL_USING_GPIO30
bool "GPIO_30"
config SOFT_I2C1_SCL_USING_GPIO32
bool "GPIO_32"
config SOFT_I2C1_SCL_USING_GPIO34
bool "GPIO_34"
config SOFT_I2C1_SDA_USING_GPIO36
depends on BSP_USING_BL808
bool "GPIO_36"
config SOFT_I2C1_SDA_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config SOFT_I2C1_SDA_USING_GPIO40
depends on BSP_USING_BL808
bool "GPIO_40"
config SOFT_I2C1_SDA_USING_GPIO42
depends on BSP_USING_BL808
bool "GPIO_42"
config SOFT_I2C1_SDA_USING_GPIO44
depends on BSP_USING_BL808
bool "GPIO_44"
endchoice
choice
prompt "I2C1 SDA"
default SOFT_I2C1_SDA_USING_GPIO1
config SOFT_I2C1_SDA_USING_GPIO1
bool "GPIO_1"
config SOFT_I2C1_SDA_USING_GPIO3
bool "GPIO_3"
config SOFT_I2C1_SDA_USING_GPIO5
bool "GPIO_5"
config SOFT_I2C1_SDA_USING_GPIO7
bool "GPIO_7"
config SOFT_I2C1_SDA_USING_GPIO9
bool "GPIO_9"
config SOFT_I2C1_SDA_USING_GPIO11
bool "GPIO_11"
config SOFT_I2C1_SDA_USING_GPIO13
bool "GPIO_13"
config SOFT_I2C1_SDA_USING_GPIO15
bool "GPIO_15"
config SOFT_I2C1_SDA_USING_GPIO17
bool "GPIO_17"
config SOFT_I2C1_SDA_USING_GPIO19
bool "GPIO_19"
config SOFT_I2C1_SDA_USING_GPIO21
bool "GPIO_21"
config SOFT_I2C1_SDA_USING_GPIO23
bool "GPIO_23"
config SOFT_I2C1_SDA_USING_GPIO25
bool "GPIO_25"
config SOFT_I2C1_SDA_USING_GPIO27
bool "GPIO_27"
config SOFT_I2C1_SDA_USING_GPIO29
bool "GPIO_29"
config SOFT_I2C1_SDA_USING_GPIO31
bool "GPIO_31"
config SOFT_I2C1_SDA_USING_GPIO33
bool "GPIO_33"
config SOFT_I2C1_SDA_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config SOFT_I2C1_SDA_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config SOFT_I2C1_SDA_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config SOFT_I2C1_SDA_USING_GPIO41
depends on BSP_USING_BL808
bool "GPIO_41"
config SOFT_I2C1_SDA_USING_GPIO43
depends on BSP_USING_BL808
bool "GPIO_43"
config SOFT_I2C1_SDA_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
endchoice
endif
endif
[bsp][bl] add drv_soft_i2c (#7406)
2023-04-29 12:40:15 +08:00
endif
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
menuconfig BSP_USING_SPI
bool "Enable SPI"
select RT_USING_SPI
add bl808-d0 spi && i2c
2023-06-30 06:50:24 +08:00
select RT_USING_PIN
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
default n
if BSP_USING_SPI
choice
prompt "SPI SCK PIN"
default SPI_SCK_USING_GPIO3 if BSP_USING_BL60X
default SPI_SCK_USING_GPIO13 if BSP_USING_BL61X
default SPI_SCK_USING_GPIO15 if BSP_USING_BL70X
default SPI_SCK_USING_GPIO19 if BSP_USING_BL808
config SPI_SCK_USING_GPIO1
depends on BSP_USING_BL61X
bool "GPIO_1"
config SPI_SCK_USING_GPIO3
depends on BSP_USING_BL60X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_3"
config SPI_SCK_USING_GPIO5
depends on BSP_USING_BL61X
bool "GPIO_5"
config SPI_SCK_USING_GPIO7
depends on BSP_USING_BL60X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_7"
config SPI_SCK_USING_GPIO9
depends on BSP_USING_BL61X
bool "GPIO_9"
config SPI_SCK_USING_GPIO11
depends on BSP_USING_BL60X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_11"
config SPI_SCK_USING_GPIO13
depends on BSP_USING_BL61X
bool "GPIO_13"
config SPI_SCK_USING_GPIO15
depends on BSP_USING_BL60X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_15"
config SPI_SCK_USING_GPIO17
depends on BSP_USING_BL61X
bool "GPIO_17"
config SPI_SCK_USING_GPIO19
depends on BSP_USING_BL60X || BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_19"
config SPI_SCK_USING_GPIO21
depends on BSP_USING_BL61X
bool "GPIO_21"
config SPI_SCK_USING_GPIO23
depends on BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_23"
config SPI_SCK_USING_GPIO25
depends on BSP_USING_BL61X
bool "GPIO_25"
config SPI_SCK_USING_GPIO27
depends on BSP_USING_BL70X || BSP_USING_BL808
bool "GPIO_27"
config SPI_SCK_USING_GPIO29
depends on BSP_USING_BL61X
bool "GPIO_29"
config SPI_SCK_USING_GPIO31
depends on BSP_USING_BL808
bool "GPIO_31"
config SPI_SCK_USING_GPIO33
depends on BSP_USING_BL61X
bool "GPIO_33"
config SPI_SCK_USING_GPIO35
depends on BSP_USING_BL808
bool "GPIO_35"
config SPI_SCK_USING_GPIO39
depends on BSP_USING_BL808
bool "GPIO_39"
config SPI_SCK_USING_GPIO43
depends on BSP_USING_BL808
bool "GPIO_43"
endchoice
choice
prompt "SPI MISO PIN"
default SPI_MISO_USING_GPIO0 if BSP_USING_BL60X
default SPI_MISO_USING_GPIO10 if BSP_USING_BL61X
default SPI_MISO_USING_GPIO17 if BSP_USING_BL70X
default SPI_MISO_USING_GPIO22 if BSP_USING_BL808
config SPI_MISO_USING_GPIO0
depends on BSP_USING_BL60X
bool "GPIO_0"
config SPI_MISO_USING_GPIO1
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_1"
config SPI_MISO_USING_GPIO2
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_2"
config SPI_MISO_USING_GPIO4
depends on BSP_USING_BL60X
bool "GPIO_4"
config SPI_MISO_USING_GPIO5
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_5"
config SPI_MISO_USING_GPIO6
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_6"
config SPI_MISO_USING_GPIO8
depends on BSP_USING_BL60X
bool "GPIO_8"
config SPI_MISO_USING_GPIO9
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_9"
config SPI_MISO_USING_GPIO10
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_10"
config SPI_MISO_USING_GPIO12
depends on BSP_USING_BL60X
bool "GPIO_12"
config SPI_MISO_USING_GPIO13
depends on BSP_USING_BL60X || BSP_USING_BL60X
bool "GPIO_13"
config SPI_MISO_USING_GPIO14
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_14"
config SPI_MISO_USING_GPIO16
depends on BSP_USING_BL60X
bool "GPIO_16"
config SPI_MISO_USING_GPIO17
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_17"
config SPI_MISO_USING_GPIO18
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_18"
config SPI_MISO_USING_GPIO20
depends on BSP_USING_BL60X
bool "GPIO_20"
config SPI_MISO_USING_GPIO21
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_21"
config SPI_MISO_USING_GPIO22
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_22"
config SPI_MISO_USING_GPIO25
depends on BSP_USING_BL70X
bool "GPIO_25"
config SPI_MISO_USING_GPIO26
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_26"
config SPI_MISO_USING_GPIO29
depends on BSP_USING_BL70X
bool "GPIO_29"
config SPI_MISO_USING_GPIO30
depends on BSP_USING_BL61X || BSP_USING_BL808
bool "GPIO_30"
config SPI_MISO_USING_GPIO34
depends on BSP_USING_BL808
bool "GPIO_34"
config SPI_MISO_USING_GPIO38
depends on BSP_USING_BL808
bool "GPIO_38"
config SPI_MISO_USING_GPIO42
depends on BSP_USING_BL808
bool "GPIO_42"
endchoice
choice
prompt "SPI MOSI PIN"
default SPI_MOSI_USING_GPIO1 if BSP_USING_BL60X
default SPI_MOSI_USING_GPIO11 if BSP_USING_BL61X
default SPI_MOSI_USING_GPIO16 if BSP_USING_BL70X
default SPI_MOSI_USING_GPIO21 if BSP_USING_BL808
config SPI_MOSI_USING_GPIO0
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_0"
config SPI_MOSI_USING_GPIO1
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_1"
config SPI_MOSI_USING_GPIO3
depends on BSP_USING_BL61X
bool "GPIO_3"
config SPI_MOSI_USING_GPIO4
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_4"
config SPI_MOSI_USING_GPIO5
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_5"
config SPI_MOSI_USING_GPIO7
depends on BSP_USING_BL61X
bool "GPIO_7"
config SPI_MOSI_USING_GPIO8
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_8"
config SPI_MOSI_USING_GPIO9
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_9"
config SPI_MOSI_USING_GPIO11
depends on BSP_USING_BL61X
bool "GPIO_11"
config SPI_MOSI_USING_GPIO12
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_12"
config SPI_MOSI_USING_GPIO13
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_13"
config SPI_MOSI_USING_GPIO15
depends on BSP_USING_BL61X
bool "GPIO_15"
config SPI_MOSI_USING_GPIO16
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_16"
config SPI_MOSI_USING_GPIO17
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_17"
config SPI_MOSI_USING_GPIO19
depends on BSP_USING_BL61X
bool "GPIO_19"
config SPI_MOSI_USING_GPIO20
depends on BSP_USING_BL60X || BSP_USING_BL70X
bool "GPIO_20"
config SPI_MOSI_USING_GPIO21
depends on BSP_USING_BL60X || BSP_USING_BL808
bool "GPIO_21"
config SPI_MOSI_USING_GPIO23
depends on BSP_USING_BL61X
bool "GPIO_23"
config SPI_MOSI_USING_GPIO24
depends on BSP_USING_BL70X
bool "GPIO_24"
config SPI_MOSI_USING_GPIO25
depends on BSP_USING_BL808
bool "GPIO_25"
config SPI_MOSI_USING_GPIO27
depends on BSP_USING_BL61X
bool "GPIO_27"
config SPI_MOSI_USING_GPIO28
depends on BSP_USING_BL70X
bool "GPIO_28"
config SPI_MOSI_USING_GPIO29
depends on BSP_USING_BL808
bool "GPIO_29"
config SPI_MOSI_USING_GPIO31
depends on BSP_USING_BL61X
bool "GPIO_31"
config SPI_MOSI_USING_GPIO33
depends on BSP_USING_BL808
bool "GPIO_33"
config SPI_MOSI_USING_GPIO37
depends on BSP_USING_BL808
bool "GPIO_37"
config SPI_MOSI_USING_GPIO41
depends on BSP_USING_BL808
bool "GPIO_41"
config SPI_MOSI_USING_GPIO45
depends on BSP_USING_BL808
bool "GPIO_45"
endchoice
config BSP_SPI_TX_USING_DMA
bool "Enable SPI TX DMA"
default n
if BSP_SPI_TX_USING_DMA
config BSP_SPI_TX_DMA_CHANNEL
string "SPI TX DMA Channel Name"
default "dma0_ch0"
config BSP_SPI_TX_DMA_TIMEOUT
int "SPI TX DMA Timeout(ms)"
default 10
range 5 100
config BSP_SPI_TX_DMA_NOCACHE_BUFSIZE
depends on BSP_USING_BL61X || BSP_USING_BL808
int "SPI TX DMA Nocache Buffer Size"
default 512
range 0 4095
endif
config BSP_SPI_RX_USING_DMA
bool "Enable SPI RX DMA"
default n
if BSP_SPI_RX_USING_DMA
config BSP_SPI_RX_DMA_CHANNEL
string "SPI RX DMA Channel Name"
default "dma0_ch1"
config BSP_SPI_RX_DMA_TIMEOUT
int "SPI RX DMA Timeout(ms)"
default 10
range 5 100
config BSP_SPI_RX_DMA_NOCACHE_BUFSIZE
depends on BSP_USING_BL61X || BSP_USING_BL808
int "SPI RX DMA Nocache Buffer Size"
default 512
range 0 4095
endif
endif
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
menuconfig BSP_USING_ON_CHIP_FLASH
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
bool "Enable On-Chip FLASH"
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
select FAL_DEBUG_CONFIG
select FAL_PART_HAS_TABLE_CFG
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
default n
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
if BSP_USING_ON_CHIP_FLASH
config BSP_USING_ON_CHIP_FLASH_FS
bool "Enable On-Chip FLASH File System"
select PKG_USING_LITTLEFS
default n
endif
[bsp/bouffalo_lab]add sdcard driver (#7577)
2023-05-29 09:47:25 +08:00
config BSP_USING_SDH
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
depends on BSP_USING_BL61X || BSP_USING_BL808
[bsp/bouffalo_lab]add sdcard driver (#7577)
2023-05-29 09:47:25 +08:00
select RT_USING_SDIO
select RT_USING_DFS
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
select RT_USING_DFS_ELMFAT
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
select RT_USING_DFS_ROMFS
bool "Enable Secure Digital Host Controller(SDH)"
[bsp/bouffalo_lab]add spi driver (#7435)
2023-05-04 11:49:38 +08:00
default n
[bsp/bouffalo_lab]update sdio host driver (#7642) Co-authored-by: chenyisong <chenyisong@tuya.com>
2023-06-08 23:39:52 +08:00
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-19 14:41:18 +08:00
endmenu